  Windows XP

  Introduction:
  -------------
  This document describes the procedure to install Windows XP driver
  for TRENDnet, TEG-PCITXR  32-bit 10/100/1000Mbps PCI ADAPTER.

  Location of Windows XP Driver : WindowsDrv\WINXP\RTNICXP.SYS

  Installing driver for Windows XP:
  ---------------------------------
  Before you start with the installation process, make sure that your
  adapter should be properly installed in your PCI bus slot.
  Executing Windows XP, it will auto-detect your system configuration and
  find the adapter hardware.
  (If Windows XP does not prompt that it detects the Ethernet Controller,
  there must be something wrong with the TEG-PCITXR Family Gigabit Ethernet
  adapter or your system enviroment.)

  1. Ask you to select which driver you want to install, select "Install from
     a list or specific location(Advanced)".

  2. Insert the TEG-PCITXR Windows driver CD-ROM and specify
     the setup file pathname(ex. D:\WindowsDrv\WINXP).

  3. The Windows XP will start to copy the drivers into the system.

  4. Windows XP will finish the other installation procedure automatically.

