  Windows 2000

  Introduction:
  -------------
  This document describes the procedure to install Windows 2000 driver
  for TRENDnet, TEG-PCITXR  32-bit 10/100/1000Mbps PCI ADAPTER.

  Location of Windows 2000 Driver : WindowsDrv\WIN2K\RTNIC.SYS

  Installing driver for Windows 2000:
  -----------------------------------
  Before you start with the installation process, make sure that your
  adapter should be properly installed in your PCI bus slot.
  Executing Windows 2000, it will auto-detect your system configuration and
  find the adapter hardware.
  (If Windows 2000 does not prompt that it detects the Ethernet Controller,
  there must be something wrong with the TEG-PCITXR Family Gigabit Ethernet
  adapter or your system enviroment.)

  1. Ask you to select which driver you want to install, select "Search for
     a suitable driver for my device(recommended)".

  2. Insert the TEG-PCITXR Windows driver CD-ROM and specify the setup file 
     pathname(ex. D:\WindowsDrv\WIN2K\) after select "Specify a location".

  3. The Windows 2000 will start to copy the drivers into the system.

  4. Windows 2000 will finish the other installation procedure automatically.

