Web Smart L2+ Firmware Release Notes
Model: TEG-204WS, TEG-284WS, TEG-524WS, TPE-082WS, TPE-204US, TPE-5028WS, TPE-5048WS, TPE-5240WS, TPE-1620WSF, TPE-1021WS
H/W Version: v1.0R
Model: TEG-082WS, TPE-1620WS, TPE-2840WS
H/W Version: v2.0R
=========================================================================
Firmware Version: v3.01.029
Release Date: 05/2025
***If upgrading from firmware version 1.00.010, firmware version 1.10.026 must be loaded first,then firmware version 2.10.024 afterwards.(Additional firmware files are included in the firmware v3.01.012 download.)***
*It is recommended to manually reset the device to factory default and to clear web browser cache after the loading firmware file 1.00.010 and 2.10.024 *

-Fixed issue setting IPv4 ACL mask to 0
-Fixed issue displaying incorrect warning message when modifying the account user name.
-Fixed issue where new accounts could not be added using the command line CLI.
-Fixed issue with device discovery using the management software utility.
-Fixed issue modifying admin password using command line CLI.
-Modified cable diagnostics test feature to display per port estimated distance.
=========================================================================
Firmware Version: v3.01.027
Release Date: 03/2024
***If upgrading from firmware version 1.00.010, firmware version 1.10.026 must be loaded first,then firmware version 2.10.024 afterwards.(Additional firmware files are included in the firmware v3.01.012 download.)***
*It is recommended to manually reset the device to factory default and to clear web browser cache after the loading firmware file 1.00.010 and 2.10.024 *

New Feature
 - Supports TRENDnet Management Utility
=========================================================================
Firmware Version: V3.01.024
Release Date 07/2023
***If upgrading from firmware version 1.00.010, firmware version 1.10.026 must be loaded first,then firmware version 2.10.024 afterwards.(Additional firmware files are included in the firmware v3.01.012 download.)***
*It is recommended to manually reset the device to factory default and to clear web browser cache after the loading firmware file 1.00.010 and 2.10.024 *

Bug Fixes
 - Fixed PoE Utilization table
=========================================================================
Firmware Version: V3.01.024
Release Date 06/2023
***If upgrading from firmware version 1.00.010, firmware version 1.10.026 must be loaded first,then firmware version 2.10.024 afterwards.(Additional firmware files are included in the firmware v3.01.012 download.)***
*It is recommended to manually reset the device to factory default and to clear web browser cache after the loading firmware file 1.00.010 and 2.10.024 *

New Features
- Added DHCP IPv4/IPv6 Relay

Bug Fixes
 - Updated security protocol to TLS 1.3 for SSL/HTTPS GUI access issue with some web browsers
=========================================================================
Firmware Version: V3.01.022
Release Date 06/2023
***If upgrading from firmware version 1.00.010, firmware version 1.10.026 must be loaded first,then firmware version 2.10.024 afterwards.(Firmware is included in this download)***
*It is recommended to manually reset the device to factory default and to clear web browser cache after the loading firmware file 1.00.010 and 2.10.024 *

Bug Fixes
 - Fixed PoE bootup issue
=========================================================================
Firmware Version: V3.01.021
Release Date 11/2022
***If upgrading from firmware version 1.00.010, firmware version 1.10.026 must be loaded first,then firmware version 2.10.024 afterwards.(Firmware is included in this download)***
*It is recommended to manually reset the device to factory default and to clear web browser cache after the loading firmware file 1.00.010 and 2.10.024 *

New Features
- Added DHCP Option 12 for device info support
- Switch can now display client info

Bug Fixes
 - Fixed SSL/HTTPS GUI access issue with web browsers
=========================================================================
Firmware Version: V3.01.015
Release Date 12/2021
***If upgrading from firmware version 1.00.010, firmware version 1.10.026 must be loaded first,then firmware version 2.10.024 afterwards.(Firmware is included in this download)***
*It is recommended to manually reset the device to factory default and to clear web browser cache after the loading firmware file 1.00.010 and 2.10.024 *

New Features
- Added setup wizard for configuring switch for TRENDnet Hive or through local default management
- Added firmware auto upgrade function

Bug Fixes
- Fixed swtich view and real-time statistics sections where it's doesn't display actual port status correctly
- Fixed ping watch dog 
=========================================================================
Firmware Version: V3.01.012
Release Date: 08/2021
***If upgrading from firmware version 1.00.010, firmware version 1.10.026 must be loaded first,then firmware version 2.10.024 afterwards.(Firmware is included in this download)***
*It is recommended to manually reset the device to factory default and to clear web browser cache after the loading firmware file 1.00.010 and 2.10.024 *

New Features
- Add ping watchdog feature
- Add the new MIB node sysPingWatchDog for ping watchdog feature.
- Add CLIs for ping watchdog
	pingwatchdog {add | del} ip <ip_addr> [interval <integer(30-3600)> repeat <integer(1-100)>]
  	pingwatchdog {enable | disable}
  	pingwatchdog show hosts

Bug Fixes
- Added internet test function
- Added Voice VLAN, RMON, Dial-In-User, TACACS+, SNMP, QoS clear for config reset
- Added delay for full-config push result response to fix result message lost message results
- Added support for cloud config backup except IP configuration
- Fixed big block message send failure issue
- Clear username and password when receive 301011133 err code
- Change to provision channel when management channel fails

Hive Updates
- Update save configuration settings in Hive cloud version 1.00.1.007
- Adds capability for backup, copy, restore config functions in Hive cloud version 1.00.1.007
- Adds capability to configure additional switch QoS functions
- Adds capability to sync or copy time settings from Hive

=========================================================================
Firmware Version: V3.01.010
Release Date: 04/2021
***If upgrading from firmware version 1.00.010, firmware version 1.10.026 must be loaded first,then firmware version 2.10.024 afterwards.(Firmware is included in this download)***
*It is recommended to manually reset the device to factory default and to clear web browser cache after the loading firmware file 1.00.010 and 2.10.024 *
-Added functionality with Cloud (TRENDnet Hive)
=========================================================================
Firmware Version: V3.01.007
Release Date: 01/2021
***If upgrading from firmware version 1.00.010, firmware version 1.10.026 must be loaded first,then firmware version 2.10.024 afterwards.(Firmware is included in this download)***
*It is recommended to manually reset the device to factory default and to clear web browser cache after the loading firmware file 1.00.010 and 2.10.024 *
-New GUI
-Added dashboard
-Added Cloud enabled feature (TRENDnet Hive)

=========================================================================
Firmware Version: V2.10.024
Release Date: 02/2020
***If upgrading from firmware version 1.00.010, firmware version 1.10.026 must be loaded first, then version 2.10.010 or above afterwards.(Firmware is included in this download)***
*If it is the first time upgrading the switch from 1.00.010 to 2.10.010 or above, it is recommended to manually reset the device to factory default and clear web browser cache after the loading firmware file.*
-GUI fixes
-Adjusted fan speed during switch operation for the following models: TPE-5240WS / TPE-5028WS / TPE-5048WS / TPE-1620WS / TPE-2840WS
=========================================================================
Firmware Version: V2.10.010
Release Date: 10/2018
***If upgrading from firmware version 1.00.010, firmware version 1.10.026 must be loaded first, then version 2.10.010 or above afterwards.(Firmware is included in this download)***
*If it is the first time upgrading the switch from 1.00.010 to 2.10.010 or above, it is recommended to manually reset the device to factory default and clear web browser cache after the loading firmware file.*
-Added SSH support
-Added Telnet support
-Added MLD Snooping
-Added Multicast VLAN
-Added LLDP (Basic TLV, Dot1 TLV, Dot3 TLV, MED port, LLDP statistics info, LLDP local port info) setting support
-Added Dynamic ARP Inspection
-Added Dual Image configuration support
-Added Dual Firmware support
-Save button moved to left hand settings column
=========================================================================
Firmware Version: V1.10.026
Release Date: 10/2018
-Added ARP Aging Time
-Added Static ARP/Table View
-Added IPv4 Static/Default Route
-Added IPv6 Static/Default Route
*It is recommended to manually reset the device to factory default and clear web browser cache after the loading firmware file.*
=========================================================================
Firmware Version: V1.00.010
Release Date: 12/2017
-Initial release
=========================================================================