# Makefile.in generated by automake 1.10 from Makefile.am.
# bgpd/Makefile.  Generated from Makefile.in by configure.

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006  Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.







pkgdatadir = $(datadir)/quagga
pkglibdir = $(libdir)/quagga
pkgincludedir = $(includedir)/quagga
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = i686-pc-linux-gnu
host_triplet = mipsel-unknown-linux-gnu
target_triplet = mipsel-unknown-linux-gnu
sbin_PROGRAMS = bgpd$(EXEEXT)
subdir = bgpd
DIST_COMMON = $(dist_examples_DATA) $(noinst_HEADERS) \
	$(srcdir)/Makefile.am $(srcdir)/Makefile.in ChangeLog
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
LIBRARIES = $(noinst_LIBRARIES)
ARFLAGS = cru
libbgp_a_AR = $(AR) $(ARFLAGS)
libbgp_a_LIBADD =
am_libbgp_a_OBJECTS = bgpd.$(OBJEXT) bgp_fsm.$(OBJEXT) \
	bgp_aspath.$(OBJEXT) bgp_community.$(OBJEXT) \
	bgp_attr.$(OBJEXT) bgp_debug.$(OBJEXT) bgp_route.$(OBJEXT) \
	bgp_zebra.$(OBJEXT) bgp_open.$(OBJEXT) bgp_routemap.$(OBJEXT) \
	bgp_packet.$(OBJEXT) bgp_network.$(OBJEXT) \
	bgp_filter.$(OBJEXT) bgp_regex.$(OBJEXT) bgp_clist.$(OBJEXT) \
	bgp_dump.$(OBJEXT) bgp_snmp.$(OBJEXT) bgp_ecommunity.$(OBJEXT) \
	bgp_mplsvpn.$(OBJEXT) bgp_nexthop.$(OBJEXT) bgp_damp.$(OBJEXT) \
	bgp_table.$(OBJEXT) bgp_advertise.$(OBJEXT) bgp_vty.$(OBJEXT)
libbgp_a_OBJECTS = $(am_libbgp_a_OBJECTS)
am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(examplesdir)"
sbinPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
PROGRAMS = $(sbin_PROGRAMS)
am_bgpd_OBJECTS = bgp_main.$(OBJEXT)
bgpd_OBJECTS = $(am_bgpd_OBJECTS)
bgpd_DEPENDENCIES = libbgp.a ../lib/libzebra.la
DEFAULT_INCLUDES = -I. -I$(top_builddir)
depcomp = $(SHELL) $(top_srcdir)/depcomp
am__depfiles_maybe = depfiles
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
	--mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
CCLD = $(CC)
LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
	--mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
	$(LDFLAGS) -o $@
SOURCES = $(libbgp_a_SOURCES) $(bgpd_SOURCES)
DIST_SOURCES = $(libbgp_a_SOURCES) $(bgpd_SOURCES)
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
dist_examplesDATA_INSTALL = $(INSTALL_DATA)
DATA = $(dist_examples_DATA)
HEADERS = $(noinst_HEADERS)
ETAGS = etags
CTAGS = ctags
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = ${SHELL} /ISD2/COMMON_APPS/quagga/missing --run aclocal-1.10
AMTAR = ${SHELL} /ISD2/COMMON_APPS/quagga/missing --run tar
AR = mipsel-linux-gnu-ar
AUTOCONF = ${SHELL} /ISD2/COMMON_APPS/quagga/missing --run autoconf
AUTOHEADER = ${SHELL} /ISD2/COMMON_APPS/quagga/missing --run autoheader
AUTOMAKE = ${SHELL} /ISD2/COMMON_APPS/quagga/missing --run automake-1.10
AWK = gawk
BGPD = 
CC = mipsel-linux-gnu-gcc
CCDEPMODE = depmode=gcc3
CFLAGS = -D__NO_CTYPE  -DLinux -fomit-frame-pointer -pipe -D__linux__ -Dunix -DEMBED -mtune=mips4 -funit-at-a-time -I/opt/buildroot-gcc346/include  -DNEW_NAT_SERVER=1 -DFOR_RT3052=1 -DSYSTEM_IS_LITTLE_ENDIAN=1 -DSYSTEM_IS_BIG_ENDIAN=0 -DUSE_UCLIB=1 -O2 -DTARGET=1 -funit-at-a-time -Os  -Os
CONFDATE = 20091221
CPP = mipsel-linux-gnu-gcc -E
CPPFLAGS = 
CURSES = 
CXX = g++
CXXCPP = g++ -E
CXXDEPMODE = depmode=gcc3
CXXFLAGS = -g -O2
CYGPATH_W = echo
DEFS = -DHAVE_CONFIG_H -DSYSCONFDIR=\"$(sysconfdir)/\"
DEPDIR = .deps
ECHO = echo
ECHO_C = 
ECHO_N = -n
ECHO_T = 
EGREP = /bin/grep -E
EXEEXT = 
F77 = gfortran
FFLAGS = -g -O2
GAWK = gawk
GREP = /bin/grep
IF_METHOD = if_ioctl.o
IF_PROC = if_proc.o
INCLUDES =  -I.. -I$(top_srcdir) -I$(top_srcdir)/lib 
INSTALL = /usr/bin/install -c
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_PROGRAM = ${INSTALL}
INSTALL_SCRIPT = ${INSTALL}
INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
IOCTL_METHOD = ioctl.o
IPFORWARD = ipforward_proc.o
ISISD = 
ISIS_METHOD = isis_pfpacket.o
ISIS_TOPOLOGY_DIR = 
ISIS_TOPOLOGY_INCLUDES = 
ISIS_TOPOLOGY_LIB = 
KERNEL_METHOD = 
LDFLAGS = 
LIBCAP = 
LIBM = -lm
LIBOBJS =  ${LIBOBJDIR}memcmp$U.o ${LIBOBJDIR}mktime$U.o ${LIBOBJDIR}lstat$U.o ${LIBOBJDIR}stat$U.o
LIBPAM = 
LIBREADLINE = 
LIBS = -lcrypt 
LIBTOOL = $(SHELL) $(top_builddir)/libtool
LIB_IPV6 = 
LIB_REGEX = 
LN_S = ln -s
LTLIBOBJS =  ${LIBOBJDIR}memcmp$U.lo ${LIBOBJDIR}mktime$U.lo ${LIBOBJDIR}lstat$U.lo ${LIBOBJDIR}stat$U.lo
MAKEINFO = ${SHELL} /ISD2/COMMON_APPS/quagga/missing --run makeinfo
MKDIR_P = /bin/mkdir -p
MULTIPATH_NUM = 1
OBJEXT = o
OSPF6D = 
OSPFAPI = 
OSPFCLIENT = 
OSPFD = 
OTHER_METHOD = 
PACKAGE = quagga
PACKAGE_BUGREPORT = http://bugzilla.quagga.net
PACKAGE_NAME = Quagga
PACKAGE_STRING = Quagga 0.99.9
PACKAGE_TARNAME = quagga
PACKAGE_VERSION = 0.99.9
PATH_SEPARATOR = :
PERL = 
RANLIB = mipsel-linux-gnu-ranlib
RIPD = ripd
RIPNGD = 
RTREAD_METHOD = rtread_proc.o
RT_METHOD = rt_ioctl.o
SED = /bin/sed
SET_MAKE = 
SHELL = /bin/sh
SNMP_INCLUDES = 
SOLARIS = 
STRIP = mipsel-linux-gnu-strip
VERSION = 0.99.9
VTYSH = 
WATCHQUAGGA = watchquagga
ZEBRA = zebra
abs_builddir = /ISD2/COMMON_APPS/quagga/bgpd
abs_srcdir = /ISD2/COMMON_APPS/quagga/bgpd
abs_top_builddir = /ISD2/COMMON_APPS/quagga
abs_top_srcdir = /ISD2/COMMON_APPS/quagga
ac_ct_CC = 
ac_ct_CXX = g++
ac_ct_F77 = gfortran
am__include = include
am__leading_dot = .
am__quote = 
am__tar = ${AMTAR} chof - "$$tardir"
am__untar = ${AMTAR} xf -
bindir = ${exec_prefix}/bin
build = i686-pc-linux-gnu
build_alias = i686-linux
build_cpu = i686
build_os = linux-gnu
build_vendor = pc
builddir = .
datadir = ${datarootdir}
datarootdir = ${prefix}/share
docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
dvidir = ${docdir}
enable_group = root
enable_user = root
enable_vty_group = 
exampledir = no
exec_prefix = ${prefix}
host = mipsel-unknown-linux-gnu
host_alias = mipsel-linux-gnu
host_cpu = mipsel
host_os = linux-gnu
host_vendor = unknown
htmldir = ${docdir}
includedir = ${prefix}/include
infodir = ${datarootdir}/info
install_sh = $(SHELL) /ISD2/COMMON_APPS/quagga/install-sh
libdir = ${exec_prefix}/lib
libexecdir = ${exec_prefix}/libexec
localedir = ${datarootdir}/locale
localstatedir = ${prefix}/var
mandir = ${datarootdir}/man
mkdir_p = /bin/mkdir -p
oldincludedir = /usr/include
pdfdir = ${docdir}
pkgsrcdir = 
pkgsrcrcdir = 
prefix = /
program_transform_name = s&^&mipsel-linux-gnu-&
psdir = ${docdir}
quagga_statedir = //var/run
sbindir = /sbin
sharedstatedir = ${prefix}/com
srcdir = .
sysconfdir = ${prefix}/etc
target = mipsel-unknown-linux-gnu
target_alias = mipsel-linux-gnu
target_cpu = mipsel
target_os = linux-gnu
target_vendor = unknown
top_builddir = ..
top_srcdir = ..
INSTALL_SDATA = /usr/bin/install -c -m 600
noinst_LIBRARIES = libbgp.a
libbgp_a_SOURCES = \
	bgpd.c bgp_fsm.c bgp_aspath.c bgp_community.c bgp_attr.c \
	bgp_debug.c bgp_route.c bgp_zebra.c bgp_open.c bgp_routemap.c \
	bgp_packet.c bgp_network.c bgp_filter.c bgp_regex.c bgp_clist.c \
	bgp_dump.c bgp_snmp.c bgp_ecommunity.c bgp_mplsvpn.c bgp_nexthop.c \
	bgp_damp.c bgp_table.c bgp_advertise.c bgp_vty.c

noinst_HEADERS = \
	bgp_aspath.h bgp_attr.h bgp_community.h bgp_debug.h bgp_fsm.h \
	bgp_network.h bgp_open.h bgp_packet.h bgp_regex.h bgp_route.h \
	bgpd.h bgp_filter.h bgp_clist.h bgp_dump.h bgp_zebra.h \
	bgp_ecommunity.h bgp_mplsvpn.h bgp_nexthop.h bgp_damp.h bgp_table.h \
	bgp_advertise.h bgp_snmp.h bgp_vty.h

bgpd_SOURCES = bgp_main.c
bgpd_LDADD = libbgp.a ../lib/libzebra.la  -lm
examplesdir = $(exampledir)
dist_examples_DATA = bgpd.conf.sample bgpd.conf.sample2
EXTRA_DIST = BGP4-MIB.txt
all: all-am

.SUFFIXES:
.SUFFIXES: .c .lo .o .obj
$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
		&& exit 0; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  bgpd/Makefile'; \
	cd $(top_srcdir) && \
	  $(AUTOMAKE) --gnu  bgpd/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure:  $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

clean-noinstLIBRARIES:
	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
libbgp.a: $(libbgp_a_OBJECTS) $(libbgp_a_DEPENDENCIES) 
	-rm -f libbgp.a
	$(libbgp_a_AR) libbgp.a $(libbgp_a_OBJECTS) $(libbgp_a_LIBADD)
	$(RANLIB) libbgp.a
install-sbinPROGRAMS: $(sbin_PROGRAMS)
	@$(NORMAL_INSTALL)
	test -z "$(sbindir)" || $(MKDIR_P) "$(DESTDIR)$(sbindir)"
	@list='$(sbin_PROGRAMS)'; for p in $$list; do \
	  p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
	  if test -f $$p \
	     || test -f $$p1 \
	  ; then \
	    f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
	   echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(sbinPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(sbindir)/$$f'"; \
	   $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(sbinPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(sbindir)/$$f" || exit 1; \
	  else :; fi; \
	done

uninstall-sbinPROGRAMS:
	@$(NORMAL_UNINSTALL)
	@list='$(sbin_PROGRAMS)'; for p in $$list; do \
	  f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
	  echo " rm -f '$(DESTDIR)$(sbindir)/$$f'"; \
	  rm -f "$(DESTDIR)$(sbindir)/$$f"; \
	done

clean-sbinPROGRAMS:
	@list='$(sbin_PROGRAMS)'; for p in $$list; do \
	  f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
	  echo " rm -f $$p $$f"; \
	  rm -f $$p $$f ; \
	done
bgpd$(EXEEXT): $(bgpd_OBJECTS) $(bgpd_DEPENDENCIES) 
	@rm -f bgpd$(EXEEXT)
	$(LINK) $(bgpd_OBJECTS) $(bgpd_LDADD) $(LIBS)

mostlyclean-compile:
	-rm -f *.$(OBJEXT)

distclean-compile:
	-rm -f *.tab.c

include ./$(DEPDIR)/bgp_advertise.Po
include ./$(DEPDIR)/bgp_aspath.Po
include ./$(DEPDIR)/bgp_attr.Po
include ./$(DEPDIR)/bgp_clist.Po
include ./$(DEPDIR)/bgp_community.Po
include ./$(DEPDIR)/bgp_damp.Po
include ./$(DEPDIR)/bgp_debug.Po
include ./$(DEPDIR)/bgp_dump.Po
include ./$(DEPDIR)/bgp_ecommunity.Po
include ./$(DEPDIR)/bgp_filter.Po
include ./$(DEPDIR)/bgp_fsm.Po
include ./$(DEPDIR)/bgp_main.Po
include ./$(DEPDIR)/bgp_mplsvpn.Po
include ./$(DEPDIR)/bgp_network.Po
include ./$(DEPDIR)/bgp_nexthop.Po
include ./$(DEPDIR)/bgp_open.Po
include ./$(DEPDIR)/bgp_packet.Po
include ./$(DEPDIR)/bgp_regex.Po
include ./$(DEPDIR)/bgp_route.Po
include ./$(DEPDIR)/bgp_routemap.Po
include ./$(DEPDIR)/bgp_snmp.Po
include ./$(DEPDIR)/bgp_table.Po
include ./$(DEPDIR)/bgp_vty.Po
include ./$(DEPDIR)/bgp_zebra.Po
include ./$(DEPDIR)/bgpd.Po

.c.o:
	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
#	source='$<' object='$@' libtool=no \
#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
#	$(COMPILE) -c $<

.c.obj:
	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
#	source='$<' object='$@' libtool=no \
#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
#	$(COMPILE) -c `$(CYGPATH_W) '$<'`

.c.lo:
	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
#	source='$<' object='$@' libtool=yes \
#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
#	$(LTCOMPILE) -c -o $@ $<

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs
install-dist_examplesDATA: $(dist_examples_DATA)
	@$(NORMAL_INSTALL)
	test -z "$(examplesdir)" || $(MKDIR_P) "$(DESTDIR)$(examplesdir)"
	@list='$(dist_examples_DATA)'; for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  f=$(am__strip_dir) \
	  echo " $(dist_examplesDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(examplesdir)/$$f'"; \
	  $(dist_examplesDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(examplesdir)/$$f"; \
	done

uninstall-dist_examplesDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(dist_examples_DATA)'; for p in $$list; do \
	  f=$(am__strip_dir) \
	  echo " rm -f '$(DESTDIR)$(examplesdir)/$$f'"; \
	  rm -f "$(DESTDIR)$(examplesdir)/$$f"; \
	done

ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	mkid -fID $$unique
tags: TAGS

TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	tags=; \
	here=`pwd`; \
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	    $$tags $$unique; \
	fi
ctags: CTAGS
CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	tags=; \
	here=`pwd`; \
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	test -z "$(CTAGS_ARGS)$$tags$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$tags $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && cd $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) $$here

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

distdir: $(DISTFILES)
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
	    fi; \
	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
	  else \
	    test -f $(distdir)/$$file \
	    || cp -p $$d/$$file $(distdir)/$$file \
	    || exit 1; \
	  fi; \
	done
check-am: all-am
check: check-am
all-am: Makefile $(LIBRARIES) $(PROGRAMS) $(DATA) $(HEADERS)
installdirs:
	for dir in "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(examplesdir)"; do \
	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
	done
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-am

clean-am: clean-generic clean-libtool clean-noinstLIBRARIES \
	clean-sbinPROGRAMS mostlyclean-am

distclean: distclean-am
	-rm -rf ./$(DEPDIR)
	-rm -f Makefile
distclean-am: clean-am distclean-compile distclean-generic \
	distclean-tags

dvi: dvi-am

dvi-am:

html: html-am

info: info-am

info-am:

install-data-am: install-dist_examplesDATA

install-dvi: install-dvi-am

install-exec-am: install-sbinPROGRAMS

install-html: install-html-am

install-info: install-info-am

install-man:

install-pdf: install-pdf-am

install-ps: install-ps-am

installcheck-am:

maintainer-clean: maintainer-clean-am
	-rm -rf ./$(DEPDIR)
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-compile mostlyclean-generic \
	mostlyclean-libtool

pdf: pdf-am

pdf-am:

ps: ps-am

ps-am:

uninstall-am: uninstall-dist_examplesDATA uninstall-sbinPROGRAMS

.MAKE: install-am install-strip

.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
	clean-libtool clean-noinstLIBRARIES clean-sbinPROGRAMS ctags \
	distclean distclean-compile distclean-generic \
	distclean-libtool distclean-tags distdir dvi dvi-am html \
	html-am info info-am install install-am install-data \
	install-data-am install-dist_examplesDATA install-dvi \
	install-dvi-am install-exec install-exec-am install-html \
	install-html-am install-info install-info-am install-man \
	install-pdf install-pdf-am install-ps install-ps-am \
	install-sbinPROGRAMS install-strip installcheck \
	installcheck-am installdirs maintainer-clean \
	maintainer-clean-generic mostlyclean mostlyclean-compile \
	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
	tags uninstall uninstall-am uninstall-dist_examplesDATA \
	uninstall-sbinPROGRAMS

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
