



#From:S500,Select this option if you want to add a guest network
S500,게스트 네트워크 추가시 선택
#From:S496,Network Type
S496,네트워크 타입
#From:LV2,Enable HTTPS Server
LV2,HTTPS Server 동작
#From:logs.LW39b.email,The Email Now button is disabled because Email Notification is not enabled on <a href="../Tools/EMail.shtml" onclick="return jump_if();" shape="rect">Tools &rarr; Email</a> screen.
logs.LW39b.email,이메일 통보가 되지 않으므로 인해서 이메일 버튼 사용 불가 <a href="../Tools/EMail.shtml" onclick="return jump_if();" shape="rect">Tools &rarr; Email</a> screen.
#From:LV3,Use HTTPS 
LV3,HTTPS 사용
#From:GW_WIRELESS_DEVICE_LINK_UP,%s%sWireless system with MAC address %m secured and linked 
GW_WIRELESS_DEVICE_LINK_UP,%s%s맥주소를 이용한 무선랜시스템 %m 보안과 연결
#From:LT248,All log entries were cleared. 
LT248,전체 로그 목록 삭제. 
#From:GW_PPPOE_EVENT_DISCOVERY_ATTEMPT,Discovering PPPoE servers for %s PPPoE Session 
GW_PPPOE_EVENT_DISCOVERY_ATTEMPT,PPPoE 서버 확인중 %s PPPoE 연결
#From:GW_WLAN_RADIO_1_NAME,5GHz Band 
GW_WLAN_RADIO_1_NAME,5GHz 대역
#From:te.SMTPSv.Port,SMTP Server Port 
te.SMTPSv.Port,SMTP 서버 포트
#From:GW_WLAN_CHANGING_PHY_MODE_TO_11NG_ONLY_INVALID,Can not change 802.11 Mode to 802.11n only, while there is an SSID with WEP security. 
GW_WLAN_CHANGING_PHY_MODE_TO_11NG_ONLY_INVALID,SSID와 WEP 설정이 되어 있어서 802.11 모드에서 802.11n 으로 변경 불가.
#From:S558,Select your Wireless Network 
S558,무선네트워크 선택
#From:KRL8,Select the Radio you Want to Configure 
KRL8,설정을 원하는 무선 선택
#From:LY30,The selection helps you to define the Guest Zone scale. 
LY30,이 선택은 게스트 영역 규모를 정의 하는데 도움을 준다.
#From:GW_WEB_SERVER_PUBLIC_PORT_CAN_NOT_MATCH_HTTPS_ADMIN_PORT,Virtual server '%s' can not use the router's HTTPS WAN administration port, %u 
GW_WEB_SERVER_PUBLIC_PORT_CAN_NOT_MATCH_HTTPS_ADMIN_PORT,가상서버 '%s' 라우터의 HTTPS  관리자 WAN 포트를 사용할 수 없다, %u
#From:GW_WIFISC_DISABLED_AUTOMATICALLY,Wi-Fi protected setup disabled because security of SSID '%s' is set to WPA-Enterprise. 
GW_WIFISC_DISABLED_AUTOMATICALLY,보안 SSID의 '%s' WPA 설정으로 인해 Wi-Fi는 설정변경을 못하도록 한다.
#From:GW_PPPOE_EVENT_OFFER,Offer received for %s PPPoE Session, service offered is %s from %s (%m) 
GW_PPPOE_EVENT_OFFER,%s PPPoE 연결 제의 수락, 서비스 제의는 %s 로 부터 %s (%m)
#From:GW_WLAN_RADIO_0_NAME,2.4GHz Band 
GW_WLAN_RADIO_0_NAME,2.4GHz 대역
#From:GW_PPPOE_EVENT_DISCOVERY_REQUEST_ERROR,%s PPPoE session protocol fault. Connection attempt failed.
GW_PPPOE_EVENT_DISCOVERY_REQUEST_ERROR,%s PPPoE 연결 프로토콜 결함. 연결시도 실패.
#From:GW_WAN_PPPOE_SESSION_NAME_CONFLICT,PPPoE session name %s conflicts with other session name 
GW_WAN_PPPOE_SESSION_NAME_CONFLICT,PPPoE 연결 이름 %s 다른 연결 이름과 충돌
#From:S525,Problem in receiving logs! Memory is too low to display logs or there is a problem with the connection.
S525,로그 수신 문제! 메모리 부족으로 로그 표현 불가  또는 연결에 문제 있음.
#From:S493,Password can only contain printable characters. 
S493,패스워드는 인쇄가능한 문자만 가능함.
#From:KR136,You should examine these warnings, because some features may have been disabled or modified. 
KR136,경고메세지를 확인해야 함, 왜냐하면 일부 기능이 동작하지 않거나 수정될수 있음.
#From:GW_PPPOE_EVENT_DISCONNECT,Terminating %s PPPoE session ID %u 
GW_PPPOE_EVENT_DISCONNECT,종료 %s PPPoE 연결 ID %u
#From:anet.multicast.enhanced,Enhanced IGMP Proxy 
anet.multicast.enhanced,향상된 IGMP 프록시
#From:LY34,Use this section to enable routing between Host Zone and Guest Zone, Guest clients can not access Host clients' data without enable the function. 
LY34,이 기능은 호스트 영역과 게스트 영역간의 라우팅이 가능하게 하고, 이 기능을 사용하지 않으면 게스트 유저들은 호스트 유저의 데이타에 접근할 수 없음.
#From:GW_WIRELESS_SHUT_DOWN,%sWireless shut down
GW_WIRELESS_SHUT_DOWN,%s무선 다운
#From:GW_WIRELESS_RESTART,%sWireless restart 
GW_WIRELESS_RESTART,%s무선 재시작
#From:S528,The administration idle time should be in the range of 1 to 65535. 
S528,관리자 유휴시간은 1 ~ 65535 범위안에 있어야 함.
#From:GW_PORT_FORWARD_TCP_PACKET_ALLOC_FAILURE,Port forwarding ALG failed to allocate session for TCP packet from %v:%u to %v:%u 
GW_PORT_FORWARD_TCP_PACKET_ALLOC_FAILURE,포트 포워딩 ALG가 TCP 패킷을 %v:%u 에서 %v:%u로 할당하는데 실패함
#From:guestzone.Intro.1,Use this section to configure the guest zone settings of your router. The guest zone provide a separate network zone for guest to access Internet. 
guestzone.Intro.1,이 기능은 라우터에서 게스트 영역을 설정. 게스트가 인터넷에 접근할수 있도록 게스트 영역에 별도의 네트워크 영역 제공.
#From:GW_NAT_VIRTUAL_SERVER_PUBLIC_PORT_CAN_NOT_MATCH_HTTPS_ADMIN_PORT,Virtual server '%s' can not use the router's HTTPS WAN administration port, %u 
GW_NAT_VIRTUAL_SERVER_PUBLIC_PORT_CAN_NOT_MATCH_HTTPS_ADMIN_PORT,가상서버 '%s' 라우터의 HTTPS 관리자의 WAN 포트 사용할수 없다, %u
#From:S473,Enable Routing Between Zones 
S473,영역간 라우팅 가능
#From:te.SMTPSv.Port.alert,Port should be in range (1..65535) 
te.SMTPSv.Port.alert,포트는 대역폭 (1..65535)안에 있어야 함.
#From:GW_WIRELESS_DEVICE_START_FAILED,%sFailed to start wireless 
GW_WIRELESS_DEVICE_START_FAILED,%s무선을 시작하는데 실패
#From:GW_PORT_FORWARD_UDP_PACKET_ALLOC_FAILURE,Port forwarding ALG failed to allocate session for UDP packet from %v:%u to %v:%u 
GW_PORT_FORWARD_UDP_PACKET_ALLOC_FAILURE,포트 포워딩 ALG이 UDP 패킷을 %v:%u 에서 %v:%u로 할당하는데 실패함.
#From:GW_WIRELESS_DEVICE_DISCONNECT_ALL,%sDisconnect all stations 
GW_WIRELESS_DEVICE_DISCONNECT_ALL,%s 모든 상태의 연결 중지
#From:GW_PPPOE_EVENT_OFFER_REQUEST,Issuing request for offer for %s PPPoE Session 
GW_PPPOE_EVENT_OFFER_REQUEST,%s PPPoE 연결제공을 위한 요청을 함
#From:GW_ROUTES_ROUTERS_IP_ADDRESS_INVALID,Router IP %v must be a valid host address 
GW_ROUTES_ROUTERS_IP_ADDRESS_INVALID,라우터 IP %v 는 반드시 유효한 호스트 주소를 가지고 있어야 함
#From:GW_PORT_TRIGGER_UDP_PACKET_ALLOC_FAILURE,Port trigger ALG failed to allocate session for UDP packet from %v:%u to %v:%u 
GW_PORT_TRIGGER_UDP_PACKET_ALLOC_FAILURE,포트 트리거 ALG는  UDP 패킷을 %v:%u 에서부터 %v:%u까지 할당하는데 실패함
#From:GW_WLAN_SETTING_SSID_SECURITY_TO_WEP_INVALID,Can not set WEP security for an SSID, while 802.11 Mode is 802.11n only. 
GW_WLAN_SETTING_SSID_SECURITY_TO_WEP_INVALID,802.11n의 SSID를 위한 WEP 보안을 설정할 수 없음
#From:GW_WEB_SERVER_PUBLIC_PORT_CAN_NOT_MATCH_HTTP_ADMIN_PORT,Virtual server '%s' can not use the router's HTTP WAN administration port, %u 
GW_WEB_SERVER_PUBLIC_PORT_CAN_NOT_MATCH_HTTP_ADMIN_PORT,가상서버 '%s'는 관리자의의 HTTP 관리자 WAN 포트, %u를 사용할 수 없음
#From:GW_WLAN_STATION_TIMEOUT,Timeout, station left 
GW_WLAN_STATION_TIMEOUT,시간초과, 작업이 완료되지 않았음
#From:GW_NAT_VIRTUAL_SERVER_IP_ADDRESS_CAN_NOT_MATCH_ROUTER,Virtual server '%s' can not use the router's IP address, %v. 
GW_NAT_VIRTUAL_SERVER_IP_ADDRESS_CAN_NOT_MATCH_ROUTER,가상서버 '%s' 는 공유기 IP 주소 %v 를 사용할 수 없음.
#From:GW_NAT_VIRTUAL_SERVER_PROTO_CONFLICT_INVALID,'%s' [protocol:%u]->%v conflicts with '%s' [protocol:%u]->%v. 
GW_NAT_VIRTUAL_SERVER_PROTO_CONFLICT_INVALID,%s' [프로토콜:%u]->%v와 '%s'가 충돌함. [프로토콜:%u]->%v
#From:LY28,Specifies whether the Guest Zone will be enabled or disabled. 
LY28,게스트 영역이 작동가능한지 안한지를 알려줌.
#From:GW_PPPOE_EVENT_CONNECT,Trying to establish %s PPPoE connection 
GW_PPPOE_EVENT_CONNECT,%s PPPoE 연결을 하려고 시도함
#From:KR971,Operating frequency band. Choose 2.4GHz for visibility to legacy devices and for longer range. Choose 5GHz for least interference; interference can hurt performance. 
KR971,통신주파수 대역. 2.4GHz는 긴 대역폭과 장비의 가시성 확보를 위해 필요하며 5GHz는 성능을 저해할 수 있는 간섭을 최소화 시켜줌.
#From:wwz.auto.assign.key3,Automatically assign a network key for both 2.4GHz and 5GHz band (Recommended) 
wwz.auto.assign.key3,자동적으로 2.4GHz 와 5GHz 주파수를 할당함. (권장사항)
#From:LY292,Provide a name for Guest Zone wireless network.
LY292,무선 게스트 네트워트 영역에 이름을 제공함.
#From:LY293,Securing your wireless network is important as it is used to protect the integrity of the information being transmitted over your wireless network. The router is capable of 4 types of wireless security; WEP, WPA only, WPA2 only, and WPA/WPA2 (auto-detect).
LY293,무선 네트워크의 보안은 무선 네트워크를 통해 전달되는 정보의 무결성을 보전하기 위해 매우 중요함. 라우터는 4가지 종류의 무선보안을 제공합니다 : WEP, WPA only, WPA2 only, and WPA/WPA2 (자동탐지).
#From:bws.msg.WEP.4,If you choose the WEP security option this device                                         will <strong>ONLY</strong> operate in <strong>Legacy Wireless mode (802.11B/G)</strong>.                                         This means you will <strong>NOT</strong> get 11N performance due to the fact that WEP                                         is not supported by the Draft 11N specification.
bws.msg.WEP.4,만약 WEP 보안 옵션을 선택하신다면, <strong>단지</strong> <strong>Legacy Wireless 모드(802.11B/G)</strong>에서만 작동됨.  이것은 WEP이 draft 11N의 성능을 지원할 수 없기에 11N 성능을 <strong>사용할 수 없음</strong>을 의미함.
#From:GW_ROUTES_ON_LINK_DATALINK_CHECK_INVALID,The route for %v on interface %s may not be created - only routes via gateways may be created on this interface 
GW_ROUTES_ON_LINK_DATALINK_CHECK_INVALID,라우터 %v 의 인터페이스 %s 를 설정되지 않았음 - 해당 인터페이스의 게이트웨이를 통한 경로만 설정되어 있음
#From:wwa.dnsset,DNS settings
wwa.dnsset,DNS 설정
#From:wireless.gu,This wizard is designed to assist you in connecting your guest wireless device to your wireless router. It will guide you through step-by-step instructions on how to get your guest wireless device connected. Click the button below to begin.
wireless.gu,이 마법사는 게스트 무선 장치를 무선 라우터로 연결시키는 작업을 돕도록 설정되어 있음. 각각의 단계를 통해 게스트 무선 장치를 연결시킬 수 있는지 알려 줌. 시작 하려면 버튼을 누르시기 바람.
#From:add.gu.wps,Add Guest Wireless with WPS
add.gu.wps,WPS와 함께 게스트 무선 추가
#From:wwl.band,Wireless Band
wwl.band,무선 대역
#From:.band,Band
.band,대역
#From:wwa.5G.nname,Manually set 5GHz band Network Name
wwa.5G.nname,수동으로 5GHz 대역 네트워크 이름 설정
#From:.guestzone,GUEST ZONE
.guestzone,게스트 영역
#From:guestzone.title.1,Guest Zone Selection
guestzone.title.1,게스트 영역 선택
#From:guestzone.enable,Enable Guest Zone
guestzone.enable,게스트 영역 동작
#From:guestzone.inclw,Include Wireless
guestzone.inclw,무선 포함
#From:guest,Guest
guest,게스트
#From:lower.wnt,lower than wireless network
lower.wnt,무선네트워크 보다 낮다
#From:equal.wnt,equal to wireless network
equal.wnt,무선네트워크와 동일
#From:.lowest,lowest
.lowest,최저
#From:ssid.lst,SSID List
ssid.lst,SSID 목록
#From:dlink.help150,Guest clients can reach to the internet along guest SSIDs
dlink.help150,게스트 유저는 게스트 SSID를 통해서 인터넷에 접속 가능함.
#From:mult.ssid,Multiple SSID
mult.ssid,여러개의 SSID
#From:dlink.help155,You may assign more than one SSID to each radio card.
dlink.help155,각각의 무선카드에 하나 이상의 SSID를 할당할수 있음.
#From:add.ed.ssid,Add/Edit SSID
add.ed.ssid,추가/편집 SSID
#From:dlink.help156,Enable or disable this SSID. When enabled, the following parameters are in effect.
dlink.help156,SSID는 설정 또는 해제 가능. SSID 설정시에는 다음의 요소에 영향을 미침.
#From:dlink.help157,This is the network to which the SSID belongs; SSID clients that belong to the same network can transmit data over this subnet.
dlink.help157,이 네트워크는 SSID에 속함;동일한 네트워크에 속한 SSID 사용자는 서브넷을 통해 데이터를 전송할 수 있음.
#From:wpin.filter,WAN Ping Inbound Filter
wpin.filter,WAN 핑 인바운드 필터
#From:dlink.help151,Select a filter that controls which WAN computers can use the ping feature. If you do not see the filter you need in the list of filters, go to the  Advanced → Inbound Filter screen and create a new filter.
dlink.help151,WAN 컴퓨터가 ping 특성을 사용할 수 있도록 제어하는 필터를 선택. 만약 목록에서 발견할 수 없다면, "Advanced → Inbound Filter screen"로 가서 새 필터를 만들어야 함.




#From:GW_WAN_RATE_ESTIMATOR_RATE_COMPLETED,WAN interface speed measurement completed 
GW_WAN_RATE_ESTIMATOR_RATE_COMPLETED,WAN 인터페이스 속도 측정이 완료되었습니다. 
#From:GW_WAN_RATE_ESTIMATOR_RESOURCE_ERROR,WAN interface speed measurements not started as low on resources 
GW_WAN_RATE_ESTIMATOR_RESOURCE_ERROR,시스템 리소스가 낮아 WAN 인터페이스 속도 측정이 시작되지 못했습니다.
#From:WIFISC_AP_PROXY_PROCESS_START,STA with MAC (%m) requested for WPS registration 
WIFISC_AP_PROXY_PROCESS_START,MAC 주소가 (%m) 인 STA가 WPS 등록을 요청하였습니다.
#From:aa.alert.7.new1,are same Machine. 
aa.alert.7.new1,동일한 장비입니다. 
#From:IPMSCHAP_AUTH_FAIL_AND_NO_RETRY,MSCHAP send authentication response (Failure and no Retry). 
IPMSCHAP_AUTH_FAIL_AND_NO_RETRY,MSCHAP이 인증 응답(실패 와 응답 없음)을 전송하였습니다 
#From:.please_wait,Please wait... 
.please_wait,기다려 주십시오…
#From:help569,Internet 
help569,인터넷
#From:IPPPPIPCP_PPP_LINK_UP,PPP network up with IP Address %v 
IPPPPIPCP_PPP_LINK_UP,IP 주소가 %v인 PPP 네트워크가 동작합니다.
#From:tf.FWCheckInf,Check Latest Firmware Version 
tf.FWCheckInf,최신 펌웨어 버전을 확인하십시오.
#From:tf.ENFA,Email me if a newer Firmware is available 
tf.ENFA,사용 가능한 최신 펌웨어가 있으면 이메일로 알려 주십시오.
#From:GW_WAN_RATE_ESTIMATOR_CONVERGENCE_ERROR,WAN interface speed measurement aborted as they did not converge 
GW_WAN_RATE_ESTIMATOR_CONVERGENCE_ERROR,컨버즈(converge) 되지 않아 WAN 인터페이스 속도 측정이 중단되었습니다. 
#From:.never,Never 
.never,Never
#From:GW_WAN_RATE_ESTIMATOR_RATE_COMPLETED_WITH_SPEED,WAN interface speed measurement completed. Upstream speed is %u kbps 
GW_WAN_RATE_ESTIMATOR_RATE_COMPLETED_WITH_SPEED,WAN 인터페이스 속도 측정이 완료되었습니다. 상향 속도는 %u kbps 입니다. 
#From:IPMSCHAP_AUTH_SEND_CHALLENGE,MSCHAP authenticator send challenge. 
IPMSCHAP_AUTH_SEND_CHALLENGE,MSCHAP 인증자(authenticator)가 챌린저(challenge)를 전송합니다. 
#From:add_wireless_device,Adding wireless device: 
add_wireless_device,무선 장치 추가 : 
#From:help890_1,Register the email notification service online to receive an email notification when a newer version of the firmware is available. 
help890_1,새로운 펌웨어 버전이 있을 경우 이메일 공지를 받을 수 있도록 이메일 알림 온라인 서비스에 등록하십시오.
#From:wt.p.1,The gateway is currently measuring your network connection. 
wt.p.1,게이트웨이가 현재 네트워크 연결을 확인하고 있습니다. 
#From:tt.week.6,6th 
tt.week.6,6th
#From:GW_ROUTES_GATEWAY_SUBNET_SAME,Destination and Gateway should not reside on the same subnet %v 
GW_ROUTES_GATEWAY_SUBNET_SAME,목적지 네트워크와 게이트웨이 주소는 같은 서브넷 %v 에 있어서는 안됩니다. 
#From:wt.p.3,This page will refresh shortly. 
wt.p.3,잠시 후 페이지가 새로 고침됩니다.
#From:tf.CKN,Check Now 
tf.CKN,지금 검색
#From:IPPPPIPCP_PPP_LINK_DOWN,PPP network down 
IPPPPIPCP_PPP_LINK_DOWN,PPP 네트워크가 다운되었습니다. 
#From:WIFISC_IR_REGISTRATION_FAIL_3,WPS Internal Registrar did not receive request from any wireless station in 2 minutes and stopped. 
WIFISC_IR_REGISTRATION_FAIL_3,WPS Internal Registrar가 2 분동안 어떤 무선 장치로부터도 요청을 받지 않았기 때문에 중단되었습니다. 
#From:IPMSCHAP_AUTH_RESULT,MSCHAP sent authentication response to peer. 
IPMSCHAP_AUTH_RESULT,MSCHAP가 피어에게 인증 응답을 전송합니다.
#From:IPMSCHAP_AUTH_SENT,MSCHAP authentication details were sent to authenticator. 
IPMSCHAP_AUTH_SENT,MSCHAP 인증 상세 정보가 인증자(authenticator) 에게 전송되었습니다.
#From:IPMSCHAP_CHALLENGE_RECVD,MSCHAP authentication challenge received from peer. 
IPMSCHAP_CHALLENGE_RECVD,피어에게 MSCHAP 인증 챌린저를 수신하였습니다.
#From:GW_ROUTES_GATEWAY_IP_ADDRESS_CONFLICTS,Gateway address %v must not be the address of the intended interface 
GW_ROUTES_GATEWAY_IP_ADDRESS_CONFLICTS,게이트웨이 주소 %v가 목적지 인터페이스의 주소여서는 안됩니다.
#From:tf.intro.FWChB,To upgrade the firmware, locate the upgrade file on the local hard drive with the Browse button.Once you have found the file to be used, click the Upload button below to start the firmware upgrade. 
tf.intro.FWChB,펌웨어 업그레이드를 위해, 검색 버튼으로 로컬 하드 드라이브에서 파일 위치를 확인하십시오. 사용할 파일을 찾았으면, 업로드 버튼을 눌러 펌웨어 업데이트를 시작하십시오.
#From:tf.COLF,Check Online Now for Latest Firmware Version 
tf.COLF,지금 검색을 눌러 최신 펌웨어가 있는지 확인하십시오.
#From:WIFISC_IR_REGISTRATION_FAIL_2,WPS Internal Registrar failed to add wireless station %m, reason: %s, err_code %u. 
WIFISC_IR_REGISTRATION_FAIL_2,WPS Internal Registrar가 무선 장치 추가에 실패하였습니다.%m, 원인: %s, err_code %u.
#From:GW_INET_ACCESS_DROP_ACCESS_CONTROL_WITH_PORT,Internet access control dropped packet from %v:%u to %v:%u (protocol %u) 
GW_INET_ACCESS_DROP_ACCESS_CONTROL_WITH_PORT,"인터넷 접속 제어에 의해 %v:%u 에서 %v:%u (protocol %u) 로 패킷이 차단되었습니다."
#From:IPMSCHAP_AUTH_FAIL,MSCHAP authentication failed - please check login details. 
IPMSCHAP_AUTH_FAIL,MSCHAP 인증 실패 -- 상세한 로그인 정보를 확인하십시오.
#From:GW_DHCP_SERVER_WINS_INCOMPATIBILITY_WARNING,<warn>WINS/NetBIOS settings cannot be learned from the internet in this Internet mode - WINS will not function as expected.</warn> 
GW_DHCP_SERVER_WINS_INCOMPATIBILITY_WARNING,<warn>현재 인터넷 연결 모드에서는 인터넷으로 부터 WINS/NetBIOS 설정을 확인할 수 없습니다. - WINS가 기대했던 대로 동작하지 않습니다.</warn>
#From:.prev,Prev 
.prev,이전
#From:GW_SCHEDULES_IN_USE_INVALID.s2,can't be deleted or renamed because it is used. 
GW_SCHEDULES_IN_USE_INVALID.s2,사용중이므로 삭제하거나 이름을 변경할 수 없습니다.
#From:tf.ADS,Available Download Site 
tf.ADS,다운로드 사이트 사용 가능
#From:WIFISC_AP_PROXY_PROCESS_CLOSE,STA with MAC (%m) WPS process closed 
WIFISC_AP_PROXY_PROCESS_CLOSE,MAC 주소가 (%m) 인 STA의 WPS 프로세스가 종료되었습니다.
#From:tf.intro.FWU2,to improve functionality and performance. 
tf.intro.FWU2,기능과 성능향상 목적으로
#From:WIFISC_IR_REGISTRATION_INPROGRESS,WPS Internal Registrar started %s registration 
WIFISC_IR_REGISTRATION_INPROGRESS,WPS Internal Registrar가 %s 등록을 시작하였습니다.
#From:IPMSCHAP_AUTH_TIMEOUT,MSCHAP authentication timed out - authentication failed. 
IPMSCHAP_AUTH_TIMEOUT,MSCHAP 인증 시간 만료 - 인증 실패
#From:tf.LFWD,Latest Firmware Date 
tf.LFWD,최신 펌웨에 일자
#From:WIFISC_IR_REGISTRATION_FAIL_1,WPS Internal Registrar failed to add new station, reason %s 
WIFISC_IR_REGISTRATION_FAIL_1,WPS Internal Registrar가 새로운 장치 추가에 실패하였습니다, 원인 %s
#From:GW_INET_ACCESS_DROP_PORT_FILTER_WITH_PORT,Internet access port filter dropped packet from %v:%u to %v:%u (protocol %u) 
GW_INET_ACCESS_DROP_PORT_FILTER_WITH_PORT,인터넷 접속 포트 필터가 %v:%u 에서 %v:%u (protocol %u) 로 패킷을 차단하였습니다.
#From:GW_DHCP_SERVER_WINS_MODE_INVALID,WINS/NetBIOS may not operate in this mode given your Internet connection settings. 
GW_DHCP_SERVER_WINS_MODE_INVALID,WINS/NetBIOS 가 현재 인터넷 연결 설정에서 동작하지 못할 수 있습니다. 
#From:IPMSCHAP_AUTH_SUCCESS,MSCHAP authentication successful. 
IPMSCHAP_AUTH_SUCCESS,MSCHAP 인증 성공
#From:GW_ROUTES_GATEWAY_IP_ADDRESS_CONFLICTS_WARNING,<warn>Route gateway IP %v matches the address of the intended interface and will be disabled.</warn> 
GW_ROUTES_GATEWAY_IP_ADDRESS_CONFLICTS_WARNING,<warn>게이트웨이 IP %v 가 목적지 인터페이스 주소와 일치하여 사용할 수 없습니다.</warn>
#From:GW_SCHEDULES_IN_USE_INVALID.s1,Schedule 
GW_SCHEDULES_IN_USE_INVALID.s1,스케쥴
#From:GW_UPNP_IGD_PORTMAP_RELEASE,UPnP deleted entry %v <-> %v:%d <-> %v%d %s '%s' (client released address) 
GW_UPNP_IGD_PORTMAP_RELEASE,UPnP가 엔트리 %v <-> %v:%d <-> %v%d %s '%s'(클라이언트가 갱신한 주소) 를 삭제하였습니다. 
#From:WIFISC_AP_PROXY_END_ON_MSG,WPS end for STA with MAC (%m) on msg: %s 
WIFISC_AP_PROXY_END_ON_MSG,WPS end for STA with MAC (%m) on msg: %s 
#From:wt.p.2,Accessing this web page might have an effect on the measurement. 
wt.p.2,웹페이지 접속이 측정에 영향을 줄 수 있습니다.
#From:WIFISC_IR_REGISTRATION_SESSION_OVERLAP,WPS Internal Registrar detected session overlap between %m and %m 
WIFISC_IR_REGISTRATION_SESSION_OVERLAP,WPS Internal Registrar가 %m 와 %m 간에 중첩 세션을 감지하였습니다.
#From:GW_DHCPSERVER_NEW_ASSIGNMENT,A network computer (%s) was assigned the IP address of %v. 
GW_DHCPSERVER_NEW_ASSIGNMENT,네트워크 컴퓨터(%s)에 IP 주소 %v가 할당 되었습니다.
#From:tf.intro.FWU1,There may be new firmware for your 
tf.intro.FWU1,새로운 펌웨어가 있을 것입니다.
#From:PPTP_EVENT_REMOTE_WINDOW_SIZE,The PPTP transmit window is %u 
PPTP_EVENT_REMOTE_WINDOW_SIZE,PPTP 전송 윈도우는 %u 입니다.

#From:Dynamic_PPPoE,Dynamic PPPoE 
Dynamic_PPPoE,유동 IP
#From:static_PPPoE,Static IP 
static_PPPoE,고정 IP

#From:GW_WLS_SCHEDULE_START,gw_wireless_schedule start 
GW_WLS_SCHEDULE_START,gw_wireless_schedule 시작
#From:dlink.help148,The section lists the current denied or allowed web sites. 
dlink.help148,현재 차단 또는 허용된 웹사이트를 보여줍니다.
#From:dlink.1.bwl.schld,Scheduling for Wireless Settings 
dlink.1.bwl.schld,무선 설정 스케쥴링 
#From:dlink.awf.intro.WF,The Website Filter option allows you to set up a list of Web sites you would like to allow or deny through your network. To use this feature, you must also select the "Apply Web Filter" checkbox in the Access Control section. 
dlink.awf.intro.WF,웹사이트 필터 옵션을 사용하여 허용 또는 차단하고 싶은 웹사이트 목록을 만들 수 있습니다. 이 기능을 사용하기 위해서는, 접속 제어에 있는 "웹 필터 적용" 체크박스를 먼저 선택하셔야 합니다. 
#From:GW_WLS_SCHEDULE_STOP,gw_wireless_schedule stop 
GW_WLS_SCHEDULE_STOP,gw_wireless_schedule 중지
#From:GW_WLS_SCHEDULE_INIT,gw_wireless_schedule init 
GW_WLS_SCHEDULE_INIT,gw_wireless_schedule 초기화
#From:dlink.1.bw1.schld.help,When Wireless is enabled, the default selection for scheduling is "Always". Selections for other schedules will be available in the drop down menu after users define schedules in the "Schedule" page. This function gets disabled when wireless is disabled. 
dlink.1.bw1.schld.help,무선이 활성화 된 경우, 스케쥴의 기본 선택사항은 "항상"입니다. 다른 스케쥴을 선택하시려면 "스케쥴" 페이지에서 스케쥴을 직접 지정하신 후, 드랍다운 메뉴에서 스케쥴을 선택할 수 있습니다. 이 기능은 무선이 비활성화 되면 함께 비활성화 됩니다. 
#From:dlink.hhwf.intro,Create a list of Web Sites to which you would like to deny or allow through the network. 
dlink.hhwf.intro,허용 또는 차단하고자 하는 웹사이트 리스트를 생성하십시오. 
#From:dlink.help145,Enter the URL (address) of the Web Site that you want to allow or deny; for example: <code>google.com</code>. Do not enter the <code>http://</code> preceding the URL. Enter the most inclusive domain; for example, select allow and enter <code>dlink.com</code> and access will be permitted to both <code>www.dlink.com</code> and <code>support.dlink.com</code>. 
dlink.help145,허용 또는 차단을 원하시는 웹사이트의 주소를 입력하십시오(예: <code>google.com</code>). 주소 앞에 <code>http://</code>  를 입력하지 마시고, 가장 포괄적인 도메인 이름을 입력하십시오. 예: 허용을 선택한 후 <code>dlink.com</code>  을 입력하시면 <code>www.dlink.com</code> 과 <code>support.dlink.com</code> 이 모두 허용됩니다. 
#From:hhac.delete,Click the <strong>Delete</strong> icon to permanently remove a rule. 
hhac.delete,<strong>Delete</strong> 버튼을 눌러 규칙을 완전히 삭제 하십시오. 
#From:dlink.help146,Many web sites construct pages with images and content from other web sites. For example, to access <code>my.yahoo.com</code>, you would need to select allow and type <code>yahoo.com</code>, <code>yimg.com</code>, and <code>doubleclick.net</code>. 
dlink.help146,많은 웹 사이트들이 다른 웹사이트로 부터 가져온 이미지와 컨텐츠를 가지고 있으므로, <code>my.yahoo.com</code>에 접속하기 위해서 <code>yahoo.com</code>, <code>yimg.com</code>, <code>doubleclick.net</code> 등의 사이트를 허용 리스트에 입력하셔야 합니다.
#From:dlink.1.add.new,Add New 
dlink.1.add.new,신규 추가
#From:dlink.1.YM23,Destination Port and Start Port should not be equal to 0 for Port Filter 
dlink.1.YM23,목적지 포트와 시작 포트는 포트 필터 0 이 되어서는 안됩니다. 


#From:dlink.wf.intro,Configure Website Filter below:
dlink.wf.intro,웹사이트 필터 설정 :
#From:dlink.wf.op.0,DENY computers access to ONLY these sites
dlink.wf.op.0,차단(DENY) 사이트 리스트
#From:dlink.wf.op.1,ALLOW computers access to ONLY these sites
dlink.wf.op.1,허용(ALLOW) 사이트 리스트


#From:WEB_FILTER_LOG_URL_ACCESSED_MAC,Web site %S accessed from %s 
WEB_FILTER_LOG_URL_ACCESSED_MAC,Web site %S accessed from %s
#From:IPNAT_TCP_BLOCKED_EGRESS_NOT_SYN,Blocked outgoing TCP packet from %v:%u to %v:%u as %s received but there is no active connection  
IPNAT_TCP_BLOCKED_EGRESS_NOT_SYN,Blocked outgoing TCP packet from %v:%u to %v:%u as %s received but there is no active connection  
#From:GW_NAT_DMZ_NOT_IN_SUBNET_INVALID,DMZ address should be within LAN subnet(%v).  
GW_NAT_DMZ_NOT_IN_SUBNET_INVALID,DMZ 주소는 반드시 LAN 서브넷 (%v) 에 있어야 합니다. 
#From:IPSEC_ALG_ESP_ESTABLISH_ALREADY_PENDING,Dropped ESP packet from %v as connection attempt already pending from %v to %v  
IPSEC_ALG_ESP_ESTABLISH_ALREADY_PENDING,%v 에서 %v 로의 연결 시도가 이미 진행중이어서 %v 에서 오는 ESP 패킷이 폐기되었습니다. 
#From:WIFISC_AP_REBOOT_COMPLETE,Reboot by %s complete  
WIFISC_AP_REBOOT_COMPLETE,%s 에 의해 리붓되었습니다. 
#From:GW_ROUTES_DESTINATION_IP_ADDRESS_INVALID,Route destination IP %v is invalid  
GW_ROUTES_DESTINATION_IP_ADDRESS_INVALID,루트 목적지 IP %v가 잘못되었습니다. 
#From:GW_UPNP_IGD_PORTMAP_REFRESH,UPnP renew entry %v <-> %v:%d <-> %v:%d %s timeout:%d '%s'  
GW_UPNP_IGD_PORTMAP_REFRESH,UPnP 갱신 엔트리 %v <-> %v:%d <-> %v:%d %s timeout:%d '%s' 
#From:GW_NAT_IP_ADDRESS_INVALID,IP address for '%s' should be within LAN subnet (%v).  
GW_NAT_IP_ADDRESS_INVALID,%s' 의 IP 주소는 반드시 LAN 서브넷 (%v) 에 있어야 합니다. 
#From:NEWER_FW_VERSION,Newer Firmware Version %d.%d for your %s %s router is now available at  
NEWER_FW_VERSION,Newer Firmware Version %d.%d for your %s %s router is now available at
#From:IPNAT_TCP_BAD_FLAGS,Blocked TCP packet from %v:%u to %v:%u as control %s in not valid  
IPNAT_TCP_BAD_FLAGS,Blocked TCP packet from %v:%u to %v:%u as control %s in not valid  
#From:IPNAT_UDP_BLOCKED_INGRESS_ICMP_ERROR_PACKET,Blocked incoming ICMP error message (ICMP type %u) from %v to %v as there is no UDP session active between %v:%u and %v:%u  
IPNAT_UDP_BLOCKED_INGRESS_ICMP_ERROR_PACKET,Blocked incoming ICMP error message (ICMP type %u) from %v to %v as there is no UDP session active between %v:%u and %v:%u  
#From:IPNAT_TCP_BLOCKED_INGRESS_BAD_ACK,Blocked incoming TCP packet from %v:%u to %v:%u with unexpected acknowledgement %lu (expected %lu to %lu)  
IPNAT_TCP_BLOCKED_INGRESS_BAD_ACK,Blocked incoming TCP packet from %v:%u to %v:%u with unexpected acknowledgement %lu (expected %lu to %lu)
#From:GW_NAT_CONFLICTING_CONNECTIONS_WARNING,<warn>Rule %s conflicts with an existing connection (%v:%u (public %v:%u)--->%v:%u). Connectivity to the rule may be affected until this connection ends.</warn>  
GW_NAT_CONFLICTING_CONNECTIONS_WARNING,<warn>Rule %s conflicts with an existing connection (%v:%u (public %v:%u)--->%v:%u). Connectivity to the rule may be affected until this connection ends.</warn>
#From:IPNAT_TCP_BLOCKED_INGRESS_UNEXP_FLAGS,Blocked incoming TCP packet from %v:%u to %v:%u as %s is not allowed in state %s  
IPNAT_TCP_BLOCKED_INGRESS_UNEXP_FLAGS,Blocked incoming TCP packet from %v:%u to %v:%u as %s is not allowed in state %s
#From:IPNAT_ICMP_BLOCKED_EGRESS_PACKET,Blocked outgoing ICMP packet (ICMP type %u) from %v to %v  
IPNAT_ICMP_BLOCKED_EGRESS_PACKET,Blocked outgoing ICMP packet (ICMP type %u) from %v to %v 
#From:WEB_FILTER_LOG_URL_ACCESSED,Web site %S accessed from %v  
WEB_FILTER_LOG_URL_ACCESSED,Web site %S accessed from %v
#From:IPNAT_TCP_BLOCKED_EGRESS_UNEXP_FLAGS,Blocked outgoing TCP packet from %v:%u to %v:%u as %s is not allowed in state %s  
IPNAT_TCP_BLOCKED_EGRESS_UNEXP_FLAGS,Blocked outgoing TCP packet from %v:%u to %v:%u as %s is not allowed in state %s  
#From:IPNAT_TCP_BLOCKED_EGRESS_BAD_SEQ,Blocked outgoing TCP packet from %v:%u to %v:%u with unexpected sequence %lu (expected %lu to %lu)  
IPNAT_TCP_BLOCKED_EGRESS_BAD_SEQ,Blocked outgoing TCP packet from %v:%u to %v:%u with unexpected sequence %lu (expected %lu to %lu)  
#From:PPTP_EVENT_TUNNEL_CONNECTED,PPTP connected to server "%s" with ID 0x%04X  
PPTP_EVENT_TUNNEL_CONNECTED,PPTP connected to server "%s" with ID 0x%04X 
#From:IPNAT_TCP_BLOCKED_INGRESS_ICMP_ERROR_PACKET,Blocked incoming ICMP error message (ICMP type %u) from %v to %v as there is no TCP connection active between %v:%u and %v:%u  
IPNAT_TCP_BLOCKED_INGRESS_ICMP_ERROR_PACKET,Blocked incoming ICMP error message (ICMP type %u) from %v to %v as there is no TCP connection active between %v:%u and %v:%u 
#From:IPNAT_BLOCKED_INGRESS_ICMP_ERROR_PACKET,Blocked incoming ICMP error message (ICMP type %u) from %v to %v as there is no session active for protocol %u between %v and %v  
IPNAT_BLOCKED_INGRESS_ICMP_ERROR_PACKET,Blocked incoming ICMP error message (ICMP type %u) from %v to %v as there is no session active for protocol %u between %v and %v
#From:IPNAT_TCP_BLOCKED_INGRESS_BAD_SEQ,Blocked incoming TCP packet from %v:%u to %v:%u with unexpected sequence %lu (expected %lu to %lu)  
IPNAT_TCP_BLOCKED_INGRESS_BAD_SEQ,Blocked incoming TCP packet from %v:%u to %v:%u with unexpected sequence %lu (expected %lu to %lu)
#From:IPNAT_ICMP_BLOCKED_INGRESS_PACKET,Blocked incoming ICMP packet (ICMP type %u) from %v to %v  
IPNAT_ICMP_BLOCKED_INGRESS_PACKET,Blocked incoming ICMP packet (ICMP type %u) from %v to %v
#From:IPNAT_TCP_BLOCKED_INGRESS_NOT_SYN,Blocked incoming TCP packet from %v:%u to %v:%u as %s received but there is no active connection  
IPNAT_TCP_BLOCKED_INGRESS_NOT_SYN,Blocked incoming TCP packet from %v:%u to %v:%u as %s received but there is no active connection
#From:GW_INET_ACL_START_IP_ADDRESS_IN_LAN_SUBNET_INVALID,Start IP address(%v) of '%s' should not be within LAN subnet(%v).  
GW_INET_ACL_START_IP_ADDRESS_IN_LAN_SUBNET_INVALID,Start IP address(%v) of '%s' should not be within LAN subnet(%v).
#From:IPNAT_TCP_BLOCKED_EGRESS_BAD_ACK,Blocked outgoing TCP packet from %v:%u to %v:%u with unexpected acknowledgement %lu (expected %lu to %lu)  
IPNAT_TCP_BLOCKED_EGRESS_BAD_ACK,Blocked outgoing TCP packet from %v:%u to %v:%u with unexpected acknowledgement %lu (expected %lu to %lu)
#From:IPNAT_ICMP_BLOCKED_INGRESS_ICMP_ERROR_PACKET,Blocked incoming ICMP error message (ICMP type %u) from %v to %v as there is no ICMP session active between %v and %v  
IPNAT_ICMP_BLOCKED_INGRESS_ICMP_ERROR_PACKET,Blocked incoming ICMP error message (ICMP type %u) from %v to %v as there is no ICMP session active between %v and %v
#From:WEB_FILTER_LOG_URL_BLOCKED_MAC,Web site %S blocked for %s
WEB_FILTER_LOG_URL_BLOCKED_MAC,웹사이트 %S 가  %s 때문에 차단되었습니다.
#From:GW_INET_ACCESS_DROP_ACCESS_CONTROL_MAC,Internet access control dropped packet from %v:%u[%s] to %v:%u (protocol %u)
GW_INET_ACCESS_DROP_ACCESS_CONTROL_MAC,인터넷 액세스 제어에 의해 %v:%u[%s] 에서 %v:%u 로 (protocol %u) 패킷이 차단되었습니다.
#From:GW_INET_ACCESS_DROP_PORT_FILTER_MAC,Internet access port filter dropped packet from %v:%u[%s] to %v:%u (protocol %u)
GW_INET_ACCESS_DROP_PORT_FILTER_MAC,인터넷 접속 포트 필터가 %v:%u[%s] 에서 %v:%u (프로토콜 %u) 로의 패킷을 차단하였습니다.
#From:tps.raw1,The raw TCP port printing protocol uses a fixed IP address and TCP port to communicate with your printer. 
tps.raw1,raw TCP 포트 프린팅 프토토콜은 프린터와 통신하기 위해 고정 IP 주소와 TCP 포트를 사용합니다.     
#From:up.tz.52,(GMT+06:30) Rangoon 
up.tz.52,(GMT+06:30) Rangoon 
#From:.r.alert.new1,Destination IP address are same 
.r.alert.new1,목적지 IP와 동일합니다.
#From:LS321,WEP 
LS321,WEP 
#From:te.EmSt,Email Settings 
te.EmSt,이메일
#From:tt.Nov,Nov 
tt.Nov,Nov 
#From:IPNAT_BLOCKED_EGRESS,Blocked outgoing packet from %v to %v (IP protocol %u) 
IPNAT_BLOCKED_EGRESS,%v 에서 %v (IP protocol %u)로의 송신 패킷이 차단되었습니다.
#From:help738,Wake on LAN 
help738,Wake on LAN 
#From:bws.WSMode,Wireless Security Mode 
bws.WSMode,무선 보안 모드
#From:help759,Wireless Local Area Network 
help759,무선 네트워크
#From:help517,The most widely used technology for Local Area Networks. 
help517,LAN 환경에서 가장 광범위하게 사용되는 기술입니다.
#From:up.tz.26,(GMT+01:00) Amsterdam, Berlin, Bern, Rome, Stockholm 
up.tz.26,(GMT+01:00) Amsterdam, Berlin, Bern, Rome, Stockholm 
#From:YM71,destination ending port should be between 0 and 65535 inclusive. 
YM71,목적지의 마지막 포트는 0과 65535 사이를 포함해야 합니다.
#From:tsc.pingt.msg102,Pings lost: 
tsc.pingt.msg102,Ping 손실:
#From:GW_FIREWALL_RANGE_DUPLICATED_INVALID,The Source IP Range '%v-%v' is duplicated.
GW_FIREWALL_RANGE_DUPLICATED_INVALID,출발지 IP 범위 '%v-%v' 가 중복되었습니다. 
#From:LS422,Hardware Address 
LS422,하드웨어 주소
#From:help65,Give the rule a name that is meaningful to you, for example <code>Game Server</code>. You can also select from a list of popular games, and many of the remaining configuration values will be filled in accordingly. However, you should check whether the port values have changed since this list was created, and you must fill in the IP address field. 
help65,규칙은 알기 쉬운 이름으로 설정하십시오. 예를 들어, <code>Game Server</code>. 유명한 게임 이름을 선택할 수 도 있고 남아 있는 설정 값들은 따라서 입력할 수 있습니다. 목록이 생성되면서 포트 설정 값이 변경되었는지 확인하시기 바랍니다. IP 주소도 반드시 입력하십시오.
#From:bwz.LWCNWz,Use Windows Connect Now 
bwz.LWCNWz,Windows Connect Now 를 사용하십시오 
#From:ta.upnp,UPnP 
ta.upnp,UPnP 
#From:bwl.TxR,Transmission Rate 
bwl.TxR,전송률
#From:help71,Select a filter that controls access as needed for this rule. If you do not see the filter you need in the list of filters, go to the <a href="../Advanced/Inbound_Filter.shtml"> Advanced&nbsp;&rarr;&nbsp;Inbound&nbsp;Filter</a> screen and create a new filter. 
help71,이 규칙에 필요할 경우 접근 제어 필터를 선택하십시오. 필요한 필터가 목록에 없을 경우, <a href="../Advanced/Inbound_Filter.shtml"> Advanced&rarr;InboundFilter</a> 화면에서 새 필터를 생성하십시오.
#From:GW_WAN_WAN_GATEWAY_IP_ADDRESS_INVALID,Invalid WAN gateway IP address: %v 
GW_WAN_WAN_GATEWAY_IP_ADDRESS_INVALID,잘못된 WAN 게이트웨이 IP 주소: %v
#From:GW_PURE_ADDPORTMAPPING_MODIFY,HNAP AddPortMapping modified %dth virtual server entry from '%s' %v:%d<->%v:%d %S to '%s' %v:%d<->%v:%d %S 
GW_PURE_ADDPORTMAPPING_MODIFY,HNAP AddPortMapping %dth 가상 서버 엔트리를 %s' %v:%d<->%v:%d %S 에서 '%s' %v:%d<->%v:%d %S 로 수정하였습니다.  
#From:tsc.pingt.msg106,Average ping time (in milliseconds): 
tsc.pingt.msg106,평균 Ping 응답시간 (in milliseconds): 
#From:tsc.AllDay,All Day 
tsc.AllDay,하루 종일 
#From:ta.wcn,Save Configuration To Wireless Network Setup Wizard 
ta.wcn,무선 네트워크 설정 마법사에 설정을 저장하십시오.
#From:gw.gm.53,Tiger Woods 2K4 
gw.gm.53,Tiger Woods 2K4 
#From:LW57,A PIN is a unique number that can be used to add the router to an existing network or to create a new network. The default PIN may be printed on the bottom of the router. For extra security, a new PIN can be generated. You can restore the default PIN at any time. Only the Administrator ("admin" account) can change or reset the PIN. 
LW57,PIN 번호는 현재 네트워크에 공유기를 추가시키거나 새로운 네트워크를 생성하는데 사용되는 유일한 번호입니다. 기본 PIN 번호는 공유기 바닥에 인쇄 되어 있습니다. 강력한 보안을 위해, 새 PIN 번호를 생성할 수 있습니다. 언제라도 기본 PIN 번호를 복구할 수 있습니다. 관리자("admin" 계정) 만이 PIN 번호를 수정하거나 리셋할 수 있습니다.
#From:.wepkey2,WEP Key 2 
.wepkey2,WEP Key 2 
#From:DHCP_CLIENT_LOST_LEASE,Lost lease on IP Address 
DHCP_CLIENT_LOST_LEASE,DHCP IP 주소 리스를 잃었습니다. 
#From:help145,Enter the URL (address) of the Web Site that you want to allow; for example: <code>google.com</code>. Do not enter the <code>http://</code> preceding the URL. Enter the most inclusive domain; for example, enter <code>dlink.com</code> and access will be permitted to both <code>www.dlink.com</code> and <code>support.dlink.com</code>. 
help145,허용할 웹 싸이트의 URL(주소)를 입력하십시오; 예를 들어: <code>google.com</code>. URL 앞에 <code>http://</code> 를 입력하지 마십시오. 가장 포괄적인 도메인 주소를 입력하십시오; 예를 들어, <code>dlink.com</code> 를 입력하면 <code>www.dlink.com</code> 와 <code>support.dlink.com</code> 가 모두 허용됩니다. 
#From:tsc.pingt.msg109,Hop 
tsc.pingt.msg109,Hop 
#From:help385,Authentication Timeout: 
help385,인증 타임아웃:
#From:.aa.wiz.s3.msg,Choose a schedule to apply to this policy. 
.aa.wiz.s3.msg,이 정책이 적용될 스케쥴을 선택하십시오.
#From:bd.NETBIOS_REG_TYPE,NetBIOS node type 
bd.NETBIOS_REG_TYPE,NetBIOS 노드 종류
#From:hhtt.intro,Good timekeeping is important for accurate logs and scheduled firewall rules. 
hhtt.intro,정확한 로그 기록 및 방화벽 규칙 적용을 위하여 시간을 정확히 입력하십시오. 
#From:help443,Bits per second 
help443,초당 Bit 수
#From:help414,Characters A-Z and 0-9 
help414,A-Z 또는 0-9 문자 
#From:ap.intro.cont,Please press the button below to continue configuring the router. 
ap.intro.cont,공유기의 설정을 계속하려면 아래 버튼을 클릭하십시오. 
#From:LW60,Create a random number that is a valid PIN. This becomes the router's PIN. You can then copy this PIN to the user interface of the registrar. 
LW60,유효한 PIN 번호가 될 수 있는 무작위 번호를 생성하십시오. 이것의 공유기의 PIN 번호가 될 것입니다. 생성후 이 PIN 번호를 registrar 인터페이스에 복사하십시오.
#From:tt.StDT,Set the Date and Time Manually 
tt.StDT,날짜와 시각을 직접 설정합니다. 
#From:help388,The IP address of the authentication server. 
help388,인증 서버의 IP 주소
#From:gw.gm.20,Final Fantasy XI (PC) 
gw.gm.20,Final Fantasy XI (PC) 
#From:.ok,OK 
.ok,추가
#From:.status,Status 
.status,상태
#From:help656,Point-to-Point Protocol over Ethernet is used to connect multiple computers to a remote server over Ethernet 
help656,이더넷을 통해 원격에 있는 다수의 컴퓨터를 연결하기 위해 Point-to-Point Protocol over Ethernet 을 사용합니다.
#From:.rs.failed,Restore Failed 
.rs.failed,복구 실패
#From:.Out,Out 
.Out,Out 
#From:sl.WtV,What to View 
sl.WtV,볼 것 
#From:KR20,The Wireless Device PIN field cannot be blank 
KR20,무선 장비의 PIN 을 입력하십시오 
#From:help352,When you are browsing for available wireless networks, this is the name that will appear in the list (unless Visibility Status is set to Invisible, see below). This name is also referred to as the SSID. For security purposes, it is highly recommended to change from the pre-configured network name. 
help352,When you are browsing for available wireless networks, this is the name that will appear in the list (unless Visibility Status is set to Invisible, see below). This name is also referred to as the SSID. For security purposes, it is highly recommended to change from the pre-configured network name. 
#From:wprn.nopr2,The setup wizard was unable to communicate with the printer. 
wprn.nopr2,설정 마법사가 프린터와 통신할 수 없습니다. 
#From:wwz.wwl.wnn,Network Name (SSID) 
wwz.wwl.wnn,네트워크 이름 (SSID) 
#From:.ipaddr,IP Address 
.ipaddr,IP 주소 
#From:help820,The direction of initiation of the conversation: 
help820,The direction of initiation of the conversation: 
#From:up.tz.54,(GMT+07:00) Krasnoyarsk 
up.tz.54,(GMT+07:00) Krasnoyarsk 
#From:help326,If all the computers on the LAN successfully obtain their IP addresses from the router's DHCP server as expected, this option can remain disabled. However, if one of the computers on the LAN fails to obtain an IP address from the router's DHCP server, it may have an old DHCP client that incorrectly turns off the broadcast flag of DHCP packets. Enabling this option will cause the router to always broadcast its responses to all clients, thereby working around the problem, at the cost of increased broadcast traffic on the LAN. 
help326,LAN 의 모든 컴퓨터가 공유기의 DHCP 서버로부터 정상적으로 IP 주소를 할당받은 경우, 이 옵션은 비활성화 됩니다. 그러나, 한 대의 컴퓨터라도 공유기의 DHCP 서버로 부터 IP 주소를 할당 받지 못 할 경우  이 옵션을 활성화 하는 것은 공유기가 모든 클라이언트에게 브로드캐스트로 응답하도록 하며, 이로 인해 LAN 구간의 성능 저하 및 장애를 유발할 수 있습니다.
#From:at.intro.2,For best performance, use the Automatic Classification option to automatically set the priority for your applications. 
at.intro.2,최적의 성능을 위하여 어플리케이션의 우선순위를 자동으로 설정되도록 자동 분류 옵션을 사용하십시오
#From:help773,Note: Some browsers have limitations that make it impossible to update the WAN status display when the status changes. Some browsers require that you refresh the display to obtain updated status. Some browsers report an error condition when trying to obtain WAN status. 
help773,주의: 일부 브라우저는 WAN 상태 변화 시 업데이트 내용을 제대로 반영하지 못 할 수 있습니다. 또한 일부 브라우저는 업데이트 내용을 반영하기 위해 브라우저의 새로고침을 기능을 사용하여야 합니다.
#From:am.MACFILT,MAC Filtering Rules 
am.MACFILT,MAC 필터링 규칙 
#From:bd.NETBIOS_ENABLE,NetBIOS announcement 
bd.NETBIOS_ENABLE,NetBIOS 알림
#From:KR77,The subnet mask of the local area network. 
KR77,LAN 서브넷 마스크
#From:help600,Older devices or technology 
help600,오래된 장비 혹은 기술
#From:help364,Super G with Dynamic Turbo 
help364,Super G with Dynamic Turbo 
#From:.aa.bsecure.shopping,Shopping 
.aa.bsecure.shopping,Shopping 
#From:.aa.bsecure.public_proxies,Public Proxies 
.aa.bsecure.public_proxies,공용 프록시
#From:help302,Each networking device has it's own unique MAC address defined by the hardware manufacturer. Some ISP's may check your computer's MAC address. Some ISP's record the MAC address of the network adapter in the computer or router used to initially connect to their service. The ISP will then only grant Internet access to requests from a computer or router with this particular MAC address. This router has a different MAC address than the computer or router that initially connected to the ISP. 
help302,모든 네트워크 장비는 하드웨어 제조사로부터 부여된 고유의 MAC 주소를 가지고 있습니다. 일부 ISP 는 가입자의 MAC 주소를 확인하거나, 최초로 접속한 컴퓨터나 공유기에 설치된 네트워크 어댑터의 MAC 주소를 기록합니다. 이후부터 ISP 는 기록된 특정 MAC 주소에 대해서만 접속을 허용합니다. 
#From:wepkey1,WEP Key 1 
wepkey1,WEP Key 1 
#From:help348,This shows clients that you have specified to have reserved DHCP addresses. An entry can be changed by clicking the Edit icon, or deleted by clicking the Delete icon. When you click the Edit icon, the item is highlighted, and the "Edit DHCP Reservation" section is activated for editing. 
help348,This shows clients that you have specified to have reserved DHCP addresses. An entry can be changed by clicking the Edit icon, or deleted by clicking the Delete icon. When you click the Edit icon, the item is highlighted, and the "Edit DHCP Reservation" section is activated for editing. 
#From:aa.intro,The Access Control option allows you to control access in and out of your network. Use this feature as Access Controls to only grant access to approved sites, limit web access based on time or dates, and/or block internet access for applications like P2P utilities or games. 
aa.intro,접근제어 옵션으로 네트워크에 나가고 들어오는 액세스를 제어할 수 있습니다. 인증된 사이트, 시간/날짜에 따른 웹 접속 제한, P2P 유틸리티 또는 게임과 같은 응용프로그램 접속을 차단하는 등의 접속 허가 여부를 제어하는 경우에만 이 기능을 사용하십시오.
#From:help486,Default 
help486,Default 
#From:gw.gm.35,PainKiller 
gw.gm.35,PainKiller 
#From:sl.Infrml,Informational 
sl.Infrml,Informational 
#From:.wireless,Wireless 
.wireless,무선
#From:bws.RIPA,RADIUS server IP Address 
bws.RIPA,RADIUS 서버 IP 주소 
#From:KR58.ww,Enabling WLAN Partition prevents associated wireless clients from communicating with each other. 
KR58.ww,WLAN 분리 기능을 활성화 하면 접속된 사용자들 간 통신은 제한됩니다. 
#From:tsc.pingt.msg10,User stopped 
tsc.pingt.msg10,User stopped
#From:help83,If Automatic Uplink Speed is disabled, this option allows you to set the uplink speed manually. Uplink speed is the speed at which data can be transferred from the router to your ISP. This is determined by your ISP. ISPs often specify speed as a downlink/uplink pair; for example, 1.5Mbps/284kbps. For this example, you would enter "284". Alternatively you can test your uplink speed with a service such as <a href="http://www.dslreports.com">www.dslreports.com</a>. Note however that sites such as DSL Reports, because they do not consider as many network protocol overheads, will generally note speeds slightly lower than the Measured Uplink Speed or the ISP rated speed. 
help83,If Automatic Uplink Speed is disabled, this option allows you to set the uplink speed manually. Uplink speed is the speed at which data can be transferred from the router to your ISP. This is determined by your ISP. ISPs often specify speed as a downlink/uplink pair; for example, 1.5Mbps/284kbps. For this example, you would enter "284". Alternatively you can test your uplink speed with a service such as <a href="http://www.dslreports.com">www.dslreports.com</a>. Note however that sites such as DSL Reports, because they do not consider as many network protocol overheads, will generally note speeds slightly lower than the Measured Uplink Speed or the ISP rated speed. 
#From:ZM11,Send/Receive authorization 
ZM11,인증 보내기/받기 
#From:tsc.start_time,Start Time 
tsc.start_time,시작 시간 
#From:hhase.intro,If the <strong>Measured Uplink Speed</strong> is known to be incorrect (that is, it produces suboptimal performance), disable <strong>Automatic Uplink Speed</strong> and enter the <strong>Manual Uplink Speed</strong>. Some experimentation and performance measurement may be required to converge on the optimal value. 
hhase.intro,<strong>Measured Uplink Speed</strong> 가 정확하지 않다면, <strong>Automatic Uplink Speed</strong> 를 비활성화하고 <strong>Manual Uplink Speed</strong>를 직접 입력하십시오. 최적 값을 모으기 위해서 일부 성능 측정 도구가 필요할 수 도 있습니다.
#From:RUNTIME_CONFIG_MAGIC_NUM_ERROR,Error loading configuration from non-volatile memory (Magic number mis-match). Reset configuration to factory defaults 
RUNTIME_CONFIG_MAGIC_NUM_ERROR,NVRAM 에서 설정을 불러오는 동안 에러가 발생하였습니다(Magic number 불일치). 설정을 초기화 하십시오. 
#From:.Sat,Sat 
.Sat,Sat 
#From:YM69,source ending port should be between 0 and 65535 inclusive. 
YM69,출발지의 마지막 포트는 0과 65535 사이를 포함해야 합니다.
#From:awf.title.WSFR,Website Filtering Rules 
awf.title.WSFR,웹싸이트 필터링 규칙
#From:KR82,If NetBIOS advertisement is swicthed on, switching this setting on causes WINS information to be learned from the WAN side, if available. 
KR82,NetBIOS 광고가 설정되어 있는 경우, WINS 정보를 WAN 쪽에 있는 경우 WAN 쪽에서 알아하도록 하는 원인이 됩니다.
#From:help18.a,You can select a computer from the list of DHCP clients in the "Computer Name" drop-down menu, or you can manually enter the IP address of the server computer. 
help18.a,You can select a computer from the list of DHCP clients in the "Computer Name" drop-down menu, or you can manually enter the IP address of the server computer. 
#From:LW39b,Only Administrator has access to these functionalities. The buttons are disabled as you are not currently logged in as Administrator. 
LW39b,관리자만이 이 기능에 접근할 수 있습니다. 버튼이 비활성화되어 있는 것은 관리자로 로그인 하지 않았기 때문입니다. 
#From:GW_SCHEDULES_NAME_RESERVED_INVALID,The Schedule name '%s' is reserved and can not be used 
GW_SCHEDULES_NAME_RESERVED_INVALID,스케쥴 이름 '%s' 는 예약되어 있으며 사용할 수 없습니다. 
#From:gw.gm.18,Far Cry 
gw.gm.18,Far Cry 
#From:LW12,Add Wireless Station 
LW12,무선 스테이션 추가
#From:YM75,Windows Media Center 
YM75,Windows Media Center 
#From:gw.gm.7,Call of Duty 
gw.gm.7,Call of Duty 
#From:GW_ROUTES_GATEWAY_IP_ADDRESS_INVALID,Route gateway IP %v is invalid 
GW_ROUTES_GATEWAY_IP_ADDRESS_INVALID,루트 게이트웨이 IP %v 가 잘못되었습니다.  
#From:help503,DSL 
help503,DSL 
#From:tps.foo,The printer's IP address and TCP port number are shown <a href="../Status/PS.shtml" onclick="return jump_if();">here</a>. 
tps.foo,프린터의 IP 주소와 TCP 포트는 <a href="../Status/PS.shtml" onclick="return jump_if();">here</a> 에서 확인할 수 있습니다.
#From:GW_PURE_ADDPORTMAPPING_CHG_PROTOCOL,HNAP AddPortMapping modified %dth virtual server entry from '%s' %v:%d<->%v:%d %S to %S 
GW_PURE_ADDPORTMAPPING_CHG_PROTOCOL,HNAP AddPortMapping 은 %dth 서버 엔트리 주소를 '%s' %v:%d<->%v:%d %S 에서 %S로 수정하였습니다. 
#From:USB_LOG_STORAGE_TYPE,Found USB mass storage with subclass %u protocol %u 
USB_LOG_STORAGE_TYPE,서브클래스 %u protocol %u 인 USB 대용량 스토리지를 검색하였습니다. 
#From:GW_WLAN_WPA_REKEY_TIME_INVALID,WPA Group Key Update Interval should be between 30 and 65535 seconds. 
GW_WLAN_WPA_REKEY_TIME_INVALID,WPA Group Key 갱신 주기는 30초에서 65535초 사이로 설정하여야 합니다.
#From:bws.msg.WEP.1,WEP is the wireless encryption standard. To use it you must enter the same key(s) into the router and the wireless stations. For 64 bit keys you must enter 10 hex digits into each key box. For 128 bit keys you must enter 26 hex digits into each key box. A hex digit is either a number from 0 to 9 or a letter from A to F. For the most secure use of WEP set the authentication type to "Shared Key" when WEP is enabled. 
bws.msg.WEP.1,WEP 은 무선 암호화 표준입니다. WEP 을 사용하기 위하여 공유기와 무선 클라이언트에 동일한 key 를 설정해야 합니다. 64bit key 는 10개의 16진수 숫자를 입력해야 하며 128bit key 는 26개의 16진수 숫자를 입력해야 합니다. 16진수는 0~9, A~Z 를 사용합니다. 보다 안전한 보안을 구현하기 위하여 WEP 을 사용할 때의 인증 방식은 "Shared Key" 로 설정합니다.
#From:help346,Game Server 
help346,Game Server
#From:.aa.bsecure.gambling,Gambling 
.aa.bsecure.gambling,Gambling
#From:KR14,Bridge Mode 
KR14,브리지 모드
#From:GW_SMTP_FROM_ADDRESS_INVALID,The given FROM address (%s) is invalid 
GW_SMTP_FROM_ADDRESS_INVALID,설정한 FROM 주소 (%s) 가 잘못되었습니다. 
#From:up.rb.5,This will cause all current settings to be lost. 
up.rb.5,현재 설정을 잃게 됩니다.
#From:.WEP,WEP 
.WEP,WEP
#From:KR112,You should examine these warnings as some features may have been disabled. 
KR112,일부 기능들이 비활성화되었습니다. 이 경고 메시지들을 반드시 확인하십시오. 
#From:gw.gm.82,SWAT 4 
gw.gm.82,SWAT 4
#From:bw.sap,The supported authentication protocols are PAP and CHAP. 
bw.sap,지원 가능한 인증 프로토콜은 PAP과 CHAP 입니다.
#From:li.alert.2,The network connection seems to be down. Press 'Ok' to try again. 
li.alert.2,네트워크 연결이 끊어졌습니다. '확인' 버튼을 누르십시오
#From:help426,The loss in strength of digital and analog signals. The loss is greater when the signal is being transmitted over long distances. 
help426,디지털 신호와 아날로그 신호의 감쇠. 신호의 감쇠는 전송 거리가 길어질 수록 심해집니다.
#From:bwn.msg.SWM,Enter the static address information provided by your Internet Service Provider (ISP). 
bwn.msg.SWM,ISP 로부터 할당받은 IP 주소 정보를 입력하십시오.
#From:help120,When Access Control is disabled, every device on the LAN has unrestricted access to the Internet. However, if you enable Access Control, Internet access is restricted for those devices that have an Access Control Policy configured for them. All other devices have unrestricted access to the Internet. 
help120,When Access Control is disabled, every device on the LAN has unrestricted access to the Internet. However, if you enable Access Control, Internet access is restricted for those devices that have an Access Control Policy configured for them. All other devices have unrestricted access to the Internet. 
#From:IGMP_HOST_LOW_RESOURCES,IGMP host has rejected group %v due to low system resources 
IGMP_HOST_LOW_RESOURCES,부족한 시스템 자원으로 인해 IGMP 호스트가 그룹 %v 의 요청을 거절하였습니다.
#From:wwl.s4.intro.z3,- Exactly 10 or 26 characters using 0-9 and A-F 
wwl.s4.intro.z3,0~9, A~F를 사용하는 10자 또는 26자의 16진수 
#From:help432,Bandwidth 
help432,Bandwidth 
#From:help858,Enable this option if you have a syslog server currently running on the LAN and wish to send log messages to it. 
help858,Enable this option if you have a syslog server currently running on the LAN and wish to send log messages to it. 
#From:help339,Windows 2000 
help339,Windows 2000 
#From:KR89,Indicates how network hosts are to perform NetBIOS name registration and discovery.
KR89,네트워크 호스트가 NetBIOS 이름을 등록하거나 검색하는 방법을 나타냅니다.
#From:help857,Enable Logging to Syslog Server
help857,시스템 로그 서버에 로그 메시지 저장하기
#From:help51,Enter the port range that you want to open up to Internet traffic (for example <code>6000-6200</code>).
help51,외부 환경에서 접근 가능한 포트 범위를 입력하십시오. (예 <code>6000-6200</code>).
#From:help106,Netmask:
help106,넷마스크: 
#From:GW_WAN_LAN_ADDRESS_CONFLICT_PPP,THE ADDRESSING OF THE INTERNET SIDE LEARNT THRU PPPoE CONFLICTS WITH THE ADDRESSING SELECTED FOR THE LAN SIDE. INTERNET COMMUNICATIONS WILL BE DISABLED UNTIL YOU HAVE CHANGED THE LAN SIDE ADDRESSING TO RESOLVE THE PROBLEM 
GW_WAN_LAN_ADDRESS_CONFLICT_PPP,PPPoE 를 통해 할당된 IP 주소가 LAN 구간의 IP 대역과 충돌합니다. 이 문제를 해결하기 위하여 LAN 구간의 IP 대역을 변경하지 않을 경우 인터넷 연결이 제한됩니다. 
#From:ss.Errors,Errors 
ss.Errors,오류 
#From:LW35,When configuring the router to access the Internet, be sure to choose the correct <strong>Internet Connection Type</strong> from the drop down menu. If you are unsure of which option to choose, contact your <strong>Internet Service Provider (ISP)</strong>. 
LW35,공유기를 이용하여 인터넷에 연결하려면 메뉴에서 정확한 <strong>내 인터넷 연결</strong> 을 설정해야 합니다. 어떤 옵션을 설정해야 할지 확실하지 않을 경우에는 <strong>인터넷 서비스 업체(ISP)</strong> 에 문의하시기 바랍니다. 
#From:help899,If a dynamic DNS update fails for any reason (for example, when incorrect parameters are entered), the router automatically disables the Dynamic DNS feature and records the failure in the log. 
help899,If a dynamic DNS update fails for any reason (for example, when incorrect parameters are entered), the router automatically disables the Dynamic DNS feature and records the failure in the log. 
#From:YM151,Voice (most urgent). 
YM151,음성 (가장 중요).
#From:help527,Breaking up data into smaller pieces to make it easier to store 
help527,저장하기 쉽도록 데이터 나누기 
#From:wps.p3.4,please enter the PIN from your wireless device and click the below 'Connect' Button 
wps.p3.4,무선 네트워크 장비에 PIN 을 입력하고 아래의 '연결' 버튼을 누르십시오 
#From:haf.dmz.40,The DMZ capability is just one of several means for allowing incoming requests that might appear unsolicited to the NAT. In general, the DMZ host should be used only if there are no other alternatives, because it is much more exposed to cyberattacks than any other system on the LAN. Thought should be given to using other configurations instead: a virtual server, a port forwarding rule, or a port trigger. Virtual servers open one port for incoming sessions bound for a specific application (and also allow port redirection and the use of ALGs ). Port forwarding is rather like a selective DMZ, where incoming traffic targeted at one or more ports is forwarded to a specific LAN host (thereby not exposing as many ports as a DMZ host). Port triggering is a special form of port forwarding, which is activated by outgoing traffic, and for which ports are only forwarded while the trigger is active. 
haf.dmz.40,DMZ은 NAT로 요청하지 않는 수신 요청을 허용하는 몇 가지 방법 중 한가지입니다. 일반적으로 DMZ 호스트는 다른 대체 방법이 없는 경우에만 사용합니다. 왜냐하면, LAN 상의 다른 시스템보다 사이버 공격에 훨씬 더 노출이 많기 때문입니다. DMZ 대신에 가상서버, 포트 포워딩 규칙, 포트 트리거 같은 설정을 사용하는 것을 고려해 보십시오. 가상서버는 특정 응용프로그램으로 가는 수신 세션에 대해 포트 하나만 열어 줍니다(포트 리다이렉션과 ALG 사용도 가능). 포트 포워딩은 선택적 DMZ 과 유사해서 한 포트 또는 한 포트 이상의 포트가 목적지인 수신 트래픽을 특정 LAN 호스트로 포워딩합니다(DMZ 호스트 보다는 공격 노출이 적음). 포트 트리거는 포트 포워딩의 특별한 형태로 송신 트래픽에서 동작되고 포트 트리거가 동작하는 동안에만 포워드됩니다.
#From:YM2,Your changes have been saved. The router must be rebooted for the changes to take effect. You can reboot now, or you can continue to make other changes and reboot later. 
YM2,변경된 설정이 저장되었습니다. 적용하려면 장비를 재부팅 해야 합니다. 지금 장비를 재부팅하거나 설정을 계속 한 후 나중에 재부팅하셔도 됩니다. 
#From:awf.intro.WF,The Web Filter option allows you to set up a list of allowed Web sites that can be used by multiple users. When Web Filter is enabled, all Web sites not listed on this page will be blocked. To use this feature, you must also select the "Apply Web Filter" checkbox in the Access Control section. 
awf.intro.WF,웹 필터 옵션을 이용하여 다수의 사용자들이 접근 가능한 웹 사이트 목록을 지정할 수 있습니다.  웹 필터를 활성화 하면 이 페이지의 목록에 존재하지 않은 웹 사이트는 모두 접근이 제한됩니다. 이 기능을 사용하려면 접근 제어 페이지의 "웹 필터 적용" 체크 박스를 체크하십시오. 
#From:LOG_PREV_MSG_REPEATED_N_TIMES,Above message repeated %d times 
LOG_PREV_MSG_REPEATED_N_TIMES,상기 메세지는 %d 번 반복되었습니다. 
#From:hhts.edit,Click the <strong>Edit</strong> icon to change an existing schedule. 
hhts.edit,설정된 스케쥴을 변경하려면 <strong>Edit</strong> 아이콘을 클릭하십시오. 
#From:wwl.wnn,Wireless Network Name (SSID) 
wwl.wnn,무선 네트워크 이름 (SSID) 
#From:ca.intro,The <strong>user</strong> account may not perform the requested action. 
ca.intro,<strong>user</strong> 계정이 요청을 처리하지 못했습니다. 
#From:ta.wcn.note,Note: refer to <a href="../Help/Tools.shtml#wcn" onclick="return jump_if();" style="white-space: nowrap;">Help -> Tools</a> for possible limitations regarding this feature. 
ta.wcn.note,주의: 이 기능과 관련한 제약 사항은 <a href="../Help/Tools.shtml#wcn" onclick="return jump_if();" style="white-space: nowrap;">Help &rarr; Tools 를 참조하시기 바랍니다. 
#From:aw.WE,WMM Enable 
aw.WE,WMM 설정
#From:GW_WAN_LAN_ADDRESS_CONFLICT_DHCP,The addressing of the Internet side learnt thru DHCP conflicts with the addressing selected for the LAN side. Internet communications will be disabled until you have changed the LAN side addressing to resolve the problem. 
GW_WAN_LAN_ADDRESS_CONFLICT_DHCP,PPPoE 를 통해 할당된 IP 주소가 LAN 구간의 IP 대역과 충돌합니다. 이 문제를 해결하기 위하여 LAN 구간의 IP 대역을 변경하지 않을 경우 인터넷 연결이 제한됩니다. 
#From:YM131,The router configuration was changed by something else during wizard operation.\nWizard function will be cancelled, please try again. 
YM131,마법사가 실행되는 동안 알 수 없는 이유로 공유기의 설정이 변경되었습니다. \n마법사의 기능이 취소됩니다. 다시 시도하십시오. 
#From:help201a,Setup Help 
help201a,Setup Help 
#From:.bsecure.activate.trial,Activate Your FREE 30 Day Trial Here 
.bsecure.activate.trial,30일 무료 사용을 활성화하십시오. 
#From:help896,Enter the password or key provided by your service provider. If the Dynamic DNS provider supplies only a key, enter that key in all three fields. 
help896,ISP 로부터 제공받은 패스워드 또는 Key 를 입력하십시오. Dynamic DNS 서비스 제공 업체가 한 개의 Key 만 제공했을 경우에는 구 Key 를 3개의 창에 모두 입력하십시오.
#From:GW_WEB_SERVER_SAME_PORT_LAN,HTTP and HTTPS cannot occupy the same LAN port. 
GW_WEB_SERVER_SAME_PORT_LAN,HTTP 와 HTTPS 는 동일한 LAN 포트를 사용할 수 없습니다. 
#From:help815,The communications protocol used for the conversation. 
help815,통신에 사용된 프로토콜 
#From:KR25,Session Time-Out 
KR25,세션 시간 초과 
#From:.netmask,Netmask 
.netmask,넷마스크 
#From:YM3,Reboot Now 
YM3,지금 재부팅
#From:help652,Post Office Protocol 3 is used for receiving email 
help652,메일 수신은 POP3 프로토콜을 사용합니다. 
#From:help12,Repeat these steps for each Virtual Server Rule you wish to add. After the list is complete, click <span class="button_ref">Save Settings</span> at the top of the page. 
help12,가상 서버 규칙을 추가하려면 이 과정을 반복하십시오. 설정 완료 후,  페이지 위의 <span class="button_ref">Save Settings</span> 버튼을 클릭하십시오.
#From:am.intro.1,The MAC (Media Access Controller) Address filter option is used to control network access based on the MAC Address of the network adapter. A MAC address is a unique ID assigned by the manufacturer of the network adapter. This feature can be configured to ALLOW or DENY network/Internet access. 
am.intro.1,MAC 주소 필터 옵션은 네트워크 어댑터의 MAC 주소를 기반으로 네트워크 접근을 제어하기 위하여 사용됩니다. MAC 주소는 네트워크 어댑터 제조사로부터 할당 받은 고유한 식별자입니다. 이 기능을 통해 네트워크 및 인터넷의 접근을 허용하거나 거부할 수 있습니다. 
#From:IPPPPLCP_SET_LOCAL_AUTH,LCP sets local auth: %04x 
IPPPPLCP_SET_LOCAL_AUTH,LCP sets local auth: %04x
#From:gw.gm.11,Crimson Skies 
gw.gm.11,Crimson Skies 
#From:help456,CardBus 
help456,카드버스 
#From:.dontsavesettings,Don't Save Settings 
.dontsavesettings,설정을 저장하지 않습니다. 
#From:help176,The section lists the current Inbound Filter Rules. An Inbound Filter Rule can be changed by clicking the Edit icon, or deleted by clicking the Delete icon. When you click the Edit icon, the item is highlighted, and the "Update Inbound Filter Rule" section is activated for editing. 
help176,The section lists the current Inbound Filter Rules. An Inbound Filter Rule can be changed by clicking the Edit icon, or deleted by clicking the Delete icon. When you click the Edit icon, the item is highlighted, and the "Update Inbound Filter Rule" section is activated for editing. 
#From:wwl.s4.intro.za1,The WPA (Wi-Fi Protected Access) key must meet one of following guildelines: 
wwl.s4.intro.za1,WPA (Wi-Fi Protected Access) key 는 다음의 기준 중 하나와 맞아야 합니다. 
#From:GW_NAT_WOL_ALG_ACTIVATED_WARNING,<warn>The Wake-On-LAN ALG has been automatically enabled because a virtual server entry you created requires it.</warn> 
GW_NAT_WOL_ALG_ACTIVATED_WARNING,<warn>생성한 가상 서버 엔트리에서 필요하기 때문에 Wake-On-LAN ALG 이 자동으로 활성화되었습니다.</warn>
#From:308,MTU default = 
308,MTU default = 
#From:aa.AT.1,MAC 
aa.AT.1,MAC 
#From:YM20,Invalid Destination IP range for Port Filter 
YM20,잘못된 포트 필터 목적지 IP 범위 
#From:IPL2TP_TUNNEL_ABORTING,L2TP local tunnel 0x%04X aborted 
IPL2TP_TUNNEL_ABORTING,L2TP 로컬 터널 0x%04X 이 중단되었습니다. 
#From:help330,Add/Edit DHCP Reservation 
help330,DHCP Reservation 추가/편집
#From:YM141,Enable this option if you want to allow WISH to prioritize your traffic.
YM141,WISH로 트래픽의 우선 순위를 정하려면 이 옵션을 활성화하십시오.
#From:tt.time.5,4 am 
tt.time.5,4 am 
#From:wwa.msg.l2tp,L2TP client. 
wwa.msg.l2tp,L2TP 클라이언트
#From:GW_PURE_ADDPORTMAPPING_CREATE,HNAP AddPortMapping created %dth virtual server entry '%s' %v:%d<->%v:%d %S 
GW_PURE_ADDPORTMAPPING_CREATE,HNAP AddPortMapping  %dth 가상 서버 엔트리 '%s' %v:%d<->%v:%d %S 를 생성하였습니다.  
#From:GW_WAN_MAC_ADDRESS_INVALID,Invalid WAN MAC address: %m 
GW_WAN_MAC_ADDRESS_INVALID,유효하지 않은 WAN MAC 주소: %m 
#From:hhag.30,Select a schedule for when the rule will be enabled. If you do not see the schedule you need in the list of schedules, go to the <a href="../Tools/Schedules.shtml" onclick="return jump_if();">Tools &rarr; Schedules</a> screen and create a new schedule. 
hhag.30,규칙을 활성화 할 스케쥴을 선택하십시오. 사용할 스케쥴이 목록에 없을 경우 <a href="../Tools/Schedules.shtml" onclick="return jump_if();">도구 &rarr; 스케줄</a> 로 이동하여 새로운 스케쥴을 생성하십시오.
#From:help6,Enter the IP Address of the machine on your LAN (for example: <code>192.168.0.50</code> 
help6,LAN 에 있는 장비의 IP 주소를 입력하십시오. (예: <code>192.168.0.50</code> 
#From:.time,Time 
.time,시간
#From:IPSMTPCLIENT_MSG_WRONG_RECEPIENT_ADDR_FORMAT,recepient email address is in wrong format 
IPSMTPCLIENT_MSG_WRONG_RECEPIENT_ADDR_FORMAT,이메일 수신자 주소의 형식이 올바르지 않습니다. 
#From:YM146,WISH supports overlaps between rules. If more than one rule matches for a specific message flow, the rule with the highest priority will be used. 
YM146,WISH는 규칙들 간에 중복해서 사용할 수 있습니다. 특정 메시지 흐름에 대해 규칙이 한 가지 이상 중복되면, 우선 순위가 높은 것을 사용합니다.
#From:help296,Normally, this is set to "auto". If you have trouble connecting to the WAN, try the other settings. 
help296,Normally, this is set to "auto". If you have trouble connecting to the WAN, try the other settings. 
#From:wprn.intro4,Step 2: Launch the setup executable on your computer 
wprn.intro4,Step 2: 컴퓨터에서 설정 실행을 시작하십시오.
#From:at.xDSL,xDSL Or Other Frame Relay Network 
at.xDSL,xDSL 또는 다른 프레임 릴레이 네트워크
#From:hhai.save,Click the <strong>Add</strong> or <strong>Update</strong> button to store a finished rule in the Rules List below. 
hhai.save,아래의 규칙 목록에 있는 규칙을 저장하려면 <strong>추가</strong> 버튼을 클릭하십시오.
#From:.LAN,LAN 
.LAN,LAN 
#From:gw.gm.60,Warcraft III 
gw.gm.60,Warcraft III 
#From:help539,Graphical user interface 
help539,Graphical user interface 
#From:wwl.64bits,64 bits 
wwl.64bits,64 bits 
#From:.aa.wiz.s4.msg,Select the machine to which this policy applies. 
.aa.wiz.s4.msg,정책을 적용할 장비를 선택하십시오. 
#From:LS151,Configuration Warnings 
LS151,설정 경고 
#From:IPFAT_DISK_FULL,Disk is full 
IPFAT_DISK_FULL,디스크가 꽉 찼습니다.
#From:sps.intro3,Your D-Link Router includes an integrated print server that allows a printer to be shared between multiple computers on your network. This page displays status information about the print server and any attached printer. 
sps.intro3,D-Link 공유기가 다수의 사용자를 위하여 통합 프린터 서버 기능을 제공하며, 이 페이지에서 프린터 서버와 연결되어 있는 프린터의 정보를 확인할 수 있습니다. 
#From:help341,Go to your Start menu, select Programs, select Accessories, and select Command Prompt. At the command prompt type <code>ipconfig /all</code> and hit Enter. The physical address displayed for the adapter connecting to the router is the MAC address. 
help341,시작 메뉴에서 프로그램 선택, 보조 프로그램 선택, 명령 프롬프트을 실행한 후 <code>ipconfig /all</code> 입력. 공유기에 연결된 어댑터의 물리적 인터페이스 주소가 MAC 주소입니다. 
#From:GW_QOS_RULES_NAME_INVALID,Name can not be empty string. 
GW_QOS_RULES_NAME_INVALID,이름은 공백으로 설정할 수 없습니다.
#From:help472,Database 
help472,Database 
#From:aa.sched.conf.2,Press 'Ok' to abandon these changes and display the Schedule page. 
aa.sched.conf.2,OK' 버튼을 누르면 변경된 사항들이 취소되고 스케쥴 페이지에 표시됩니다. 
#From:NET_RTC_SYNCHRONIZATION_FAILED,Time synchronization failed (status %d) 
NET_RTC_SYNCHRONIZATION_FAILED,시간 동기화에 실패하였습니다.  (상태 %d)
#From:IPL2TP_SESSION_CONNECTING,Trying to start L2TP local session 0x%04X 
IPL2TP_SESSION_CONNECTING,L2TP 로컬 세션 0x%04X 시작 시도
#From:help520,File server 
help520,파일 서버
#From:tf.AutoCh,Automatically Check Online for Latest Firmware Version 
tf.AutoCh,최신 펌웨어 버젼 자동 확인 
#From:GW_NAT_VS_PROTO_CONFLICT_INVALID,'%s' [protocol:%u]->%v conflicts with '%s' [protocol:%u]->%v. 
GW_NAT_VS_PROTO_CONFLICT_INVALID,%s' [protocol:%u]->%v 와 '%s' [protocol:%u]->%v 가 충돌합니다.
#From:wprn.iderr2,The printer manufacturer and/or model could not be determined, possibly due to an invalid device ID reported by the printer. The wizard cannot continue without this information. 
wprn.iderr2,프린터에서 제공한 ID를 확인할 수 없어 프린터 제조사, 또는 모델의 확인이 불가능합니다. 해당 정보 없이는 마법사가 진행되지 않습니다.
#From:GW_WISH_RULES_NAME_INVALID,Name can not be empty string. 
GW_WISH_RULES_NAME_INVALID,이름은 공백으로 설정할 수 없습니다.
#From:help319,These two IP values (<i>from</i> and <i>to</i>) define a range of IP addresses that the DHCP Server uses when assigning addresses to computers and devices on your Local Area Network. Any addresses that are outside of this range are not managed by the DHCP Server; these could, therefore, be used for manually configured devices or devices that cannot use DHCP to obtain network address details automatically. 
help319,These two IP values (<i>from</i> and <i>to</i>) define a range of IP addresses that the DHCP Server uses when assigning addresses to computers and devices on your Local Area Network. Any addresses that are outside of this range are not managed by the DHCP Server; these could, therefore, be used for manually configured devices or devices that cannot use DHCP to obtain network address details automatically. 
#From:help800,Clicking this button refreshes the display of log entries. There may be new events since the last time you accessed the log. 
help800,Clicking this button refreshes the display of log entries. There may be new events since the last time you accessed the log. 
#From:af.intro.2,<b>Note:</b> Putting a computer in the DMZ may expose that computer to a variety of security risks. Use of this option is only recommended as a last resort. 
af.intro.2,<b>주의:</b> DMZ에 컴퓨터를 두면 여러 가지 보안 위험에 노출 될 수 있습니다. 다른 방법이 없는 경우 마지막 수단으로 이 옵션을 사용하십시오.
#From:sd.title.Dev_Info,Device Information 
sd.title.Dev_Info,장비 정보
#From:GW_INET_ACCESS_DROP_PORT_FILTER,Internet access port filter dropped packet from %v:%u to %v:%u (protocol %u) 
GW_INET_ACCESS_DROP_PORT_FILTER,인터넷 접속 포트 필터가 %v:%u 에서 %v:%u (프로토콜 %u) 로의 패킷을 차단하였습니다. 
#From:.connow,Windows Connect Now 
.connow,Windows Connect Now 
#From:IPSIPALG_REJECTED_PACKET,SIP ALG rejected packet from %v:%u to %v:%u 
IPSIPALG_REJECTED_PACKET,SIP ALG  %v:%u 에서 %v:%u 로의 패킷의 거부하였습니다.
#From:ADMIN,Administrator 
ADMIN,Administrator 
#From:IPNAT_TCP_UNABLE_TO_MODIFY_OPTIONS,Dropped TCP packet from %v:%u to %v:%u as unable to modify header options 
IPNAT_TCP_UNABLE_TO_MODIFY_OPTIONS,헤더 옵션을 수정할 수 없어 %v:%u 에서 %v:%u 로의 TCP 패킷이 차단되었습니다. 
#From:WIFISC_IR_REGISTRATION_FAIL,Adding wireless station %m failed, reason: %s, err_code %u 
WIFISC_IR_REGISTRATION_FAIL,무선 클라이언트 %m 추가 실패, 원인: %s, 오류_코드 %u
#From:tt.SelNTPSrv,Select NTP Server 
tt.SelNTPSrv,NTP 서버를 선택하십시오. 
#From:help737,VoIP 
help737,VoIP 
#From:r.rlist,ROUTE LIST 
r.rlist,루트 리스트
#From:KR18,Enter an 8- to 63-character alphanumeric pass-phrase. 
KR18,8-63개의 알파벳 혹은 숫자의 비밀번호(pass-phrase)를 입력하십시오. 
#From:bws.WKL.1,128 bit (26 hex digits) 
bws.WKL.1,128 bit (26 hex digits) 
#From:.user,User 
.user,User 
#From:help812,A noisy radio-frequency environment can cause a high error rate on the wireless LAN. 
help812,주파수의 잡음은 무선 랜의 오류를 증가시킬 수 있습니다. 
#From:sa.Originator,Originator 
sa.Originator,Originator 
#From:up.tz.59,(GMT+08:00) Taipei 
up.tz.59,(GMT+08:00) Taipei 
#From:aw.erpe,Extra Wireless Protection 
aw.erpe,추가 무선 보호
#From:SPECIAL_APP,Special Applications 
SPECIAL_APP,스페셜 응용프로그램
#From:wwl.NONE,NONE 
wwl.NONE,NONE 
#From:GW_WAN_SERVICES_STARTED,Starting WAN Services 
GW_WAN_SERVICES_STARTED,WAN 서비스 시작 
#From:GW_NAT_PORT_FORWARD_RANGE_BOTH_EMPTY_INVALID,Port ranges can not be both empty. 
GW_NAT_PORT_FORWARD_RANGE_BOTH_EMPTY_INVALID,포트 범위는 공란으로 설정할 수 없습니다.
#From:fb.FbWbAc,Forbidden Web Access 
fb.FbWbAc,금지된 웹 액세스
#From:GW_ROUTES_GATEWAY_IP_ADDRESS_IN_SUBNET_INVALID,Route gateway IP %v is not in interface subnet 
GW_ROUTES_GATEWAY_IP_ADDRESS_IN_SUBNET_INVALID,공유기 게이트웨이 IP 주소 %v 가 인터페이스 서브넷 범위에 없습니다. 
#From:help275,You have to open up the Web-based management interface and click the Connect button manually any time that you wish to connect to the Internet. 
help275,You have to open up the Web-based management interface and click the Connect button manually any time that you wish to connect to the Internet. 
#From:help646,The first layer of the OSI model. Provides the hardware means of transmitting electrical signals on a data carrier 
help646,OSI 모델의 첫 번째 계층은 데이터 전송에 대한 전기적 전송 신호 규격을 제공합니다. 
#From:wprn.nopr,No Printer Detected 
wprn.nopr,검색된 프린터가 없음
#From:tt.TimeZ,Time Zone 
tt.TimeZ,시간대
#From:wprn.tt,Troubleshooting Tips 
wprn.tt,장애처리 도움말
#From:help841,Select your local time zone from pull down menu. 
help841,메뉴에서 로컬 시간대를 선택하십시오.
#From:LW37,Wireless Wizard 
LW37,무선 마법사
#From:wprn.s1a,The following printer has been detected. Click <em>Next</em> to install the printer onto your computer. 
wprn.s1a,다른 프린터가 검색 되었습니다. 프린터를 설치하려면 <em>Next</em> 를 클릭하십시오. 
#From:aa.sched.new,Define a new schedule 
aa.sched.new,새로운 규칙을 지정하십시오. 
#From:tt.time.14,1 pm 
tt.time.14,1 pm 
#From:tsl.SLSt,SysLog Settings 
tsl.SLSt,시스템 로그 설정
#From:gw.vs.1,HTTP 
gw.vs.1,HTTP 
#From:IPH323ALG_REJECTED_PACKET,H.323 ALG rejected packet from %v:%u to %v:%u 
IPH323ALG_REJECTED_PACKET,H.323 ALG가 %v:%u 에서 %v:%u 로의 패킷을 거부하였습니다. 
#From:ZM20,To save the configuration, click the <strong>Save Configuration</strong> button. 
ZM20,설정을 저장하려면, <strong>Save Configuration</strong> 버튼을 클릭하십시오. 
#From:aa.wiz.s1.msg4,Step 4 - Select filtering method 
aa.wiz.s1.msg4,Step 4 - 필터링 방법 선택
#From:help336,Windows 98 
help336,Windows 98 
#From:ta.sn,System Name 
ta.sn,시스템 이름
#From:help780,Depending on whether you are currently logged in to BigPond, you can click either the <span class="button_ref">BigPond Login</span> to attempt to establish the WAN connection or the <span class="button_ref">BigPond Logout</span> to break the WAN connection. 
help780,Depending on whether you are currently logged in to BigPond, you can click either the <span class="button_ref">BigPond Login</span> to attempt to establish the WAN connection or the <span class="button_ref">BigPond Logout</span> to break the WAN connection. 
#From:help376,Cipher Type: 
help376,Cipher Type: 
#From:GW_FW_NOTIFY_EMAIL_DISABLED_INVALID,Email Notification is not enabled on Tools->Email Settings page but Email Notification of New Firmware Version is enabled in Tools->Firmware page. 
GW_FW_NOTIFY_EMAIL_DISABLED_INVALID,도구->이메일 설정 페이지에서 이메일 알림은 설정되어 있지 않지만 새로운 펌웨어 버전의 알림 기능은 도구->펌웨어 페이지에 설정되어 있습니다. 
#From:help745,Web browser 
help745,Web browser 
#From:YM122,Invalid WEP Key 
YM122,유효하지 않은 WEP Key
#From:GW_NAT_DMZ_CONFLICT_WITH_LAN_IP_INVALID,DMZ address %v can not be the same as the LAN IP address. 
GW_NAT_DMZ_CONFLICT_WITH_LAN_IP_INVALID,DMZ 주소 %v는 LAN IP 주소와 같아서는 안됩니다. 
#From:help659,Used to synchronize communication timing between devices on a network 
help659,네트워크 상의 장비간 통신 시간 동기화 시 사용됩니다.
#From:.sdi.s7,Incorrectly configured - check logs 
.sdi.s7,잘못된 설정- 로그를 확인하십시오. 
#From:.interface,Interface 
.interface,인터페이스
#From:at.title.SESet,QoS Engine Setup 
at.title.SESet,QoS 엔진 설정 
#From:WEB_FILTER_LOG_URL_BLOCKED,Web site %S blocked for %v 
WEB_FILTER_LOG_URL_BLOCKED,웹사이트 %S 가  %v 때문에 차단되었습니다. 
#From:vs.http.port,Remote Admin Port confict with Virtual Server Item 
vs.http.port,원격 관리 포트가 가상 서버 항목과 충돌합니다.
#From:GW_INET_ACL_START_PORT_INVALID,Start port must be less than end port: %d-%d. 
GW_INET_ACL_START_PORT_INVALID,시작 포트는 마지막 포트보다 작아야 합니다: %d-%d. 
#From:IPSMTPCLIENT_DATA_FAILED,failed to send email data 
IPSMTPCLIENT_DATA_FAILED,전자메일 정보를 보내는데 실패했습니다.
#From:up.tz.07,(GMT-06:00) Central America 
up.tz.07,(GMT-06:00) Central America 
#From:KR91,M-Node (default), this indicates a Mixed-Mode of operation. First Broadcast operation is performed to register hosts and discover other hosts, if broadcast operation fails, WINS servers are tried, if any. This mode favours broadcast operation which may be preferred if WINS servers are reachable by a slow network link and the majority of network services such as servers and printers are local to the LAN. 
KR91,M-Node(디폴트) 는 혼합 모드(Mixed-Mode)입니다. 호스트를 등록하고 다른 호스트를 검색하기 위해 처음 브로드캐스트를 해서 그 브로드캐스트가 실패하면, WINS 서버가 동작합니다. 이 모드는 속도가 느린 네트워크인 경우 WINS 서버와 통신해야 하는 경우 우선시됩니다. 서버나 프린터 같은 대부분의 네트워크 서비스들은 LAN 네트워크에 있습니다.
#From:haf.intro.1,The router provides a tight firewall by virtue of the way NAT works. Unless you configure the router to the contrary, the NAT does not respond to unsolicited incoming requests on any port, thereby making your LAN invisible to Internet cyberattackers. However, some network applications cannot run with a tight firewall. Those applications need to selectively open ports in the firewall to function correctly. The options on this page control several ways of opening the firewall to address the needs of specific types of applications. 
haf.intro.1,공유기는  NAT가 동작하는 방식에 의해 엄격한 방화벽을 지원합니다. 공유기를 반대로 설정하지 않은 한, NAT는 확실치 않은 수신 요청에 대해 어떤 포트도 응답하지 않고 따라서 사이버공격자들로부터 LAN 네트워크를 보이지 않게 해 줍니다. 그러나 일부 네트워크 응용프로그램들은 방화벽 없이는 동작할 수 없습니다. 이런 응용프로그램들은 제대로 동작할 수 있도록 방화벽에서 선택적으로 포트를 열어 주어야 합니다. 이 페이지에 있는 옵션으로 특정 응용프로그램의 필요에 따라 방화벽을 여는 몇 가지 방법을 제어하는 방법을 알려줍니다.
#From:wwa.gw,Gateway Address 
wwa.gw,게이트웨이 주소 
#From:aw.intro,If you are not familiar with these Advanced Wireless settings, please read the help section before attempting to modify these settings. 
aw.intro,고급 무선 설정에 익숙하지 않으면, 설정을 변경하기 전에 도움말을 참조하시기 바랍니다.
#From:.sentinel.serv,Sentinel Services 
.sentinel.serv,Sentinel 서비스
#From:help727,USB 
help727,USB 
#From:.aa.bsecure.opinion,Opinion 
.aa.bsecure.opinion,Opinion 
#From:wwa.msg.sipa,Choose this option if your Internet Setup Provider provided you with IP Address information that has to be manually configured. 
wwa.msg.sipa,가입하신 인터넷 서비스 공급업체(ISP)로 부터 고정 IP 주소를 받은 경우에 이 옵션을 선택하십시오.
#From:help753,Wireless ISP 
help753,무선 ISP 
#From:tss.RestAll.b,Restore Factory Defaults 
tss.RestAll.b,공장 초기값으로 복구 
#From:GW_NAT_PORT_TRIGGER_CONFLICT_INVALID,%s of '%s' [%s:%s]->%s conflicts with '%s' [%s:%s]->%s. 
GW_NAT_PORT_TRIGGER_CONFLICT_INVALID,%s of '%s' [%s:%s]->%s 가 '%s' [%s:%s]->%s 와 충돌합니다. 
#From:help574,The method of transferring data from one computer to another on the Internet 
help574,한 컴퓨터에서 인터넷에 있는 다른 컴퓨터로의 데이터 통신 방법 
#From:IPNAT_TCP_UNABLE_TO_HANDLE_HEADER,Dropped TCP packet from %v to %v as unable handle packet header 
IPNAT_TCP_UNABLE_TO_HANDLE_HEADER,패킷 헤더 인식 불가로 인한 %v 부터 %v 까지 패킷 드롭 
#From:haf.dmz.50,Few applications truly require the use of the DMZ host. Following are examples of when a DMZ host might be required: 
haf.dmz.50,일부 응용프로그램은 DMZ 호스트를 사용하여야 합니다. 다음은 DMZ 호스트가 필요한 경우의 예 입니다.
#From:hhav.ip,You can select a computer from the list of DHCP clients in the <strong>Computer Name</strong> drop down menu, or you can manually enter the IP address of the computer at which you would like to open the specified port. 
hhav.ip,<strong>컴퓨터 이름</strong> 메뉴의 DHCP 클라이언트 목록 중에서 컴퓨터를 선택하거나 특정 포트를 열어야 할 컴퓨터의 IP 주소를 직접 입력할 수 있습니다. 
#From:GW_INET_ACCESS_POLICY_END_MAC,Policy %s stopped; Internet access for MAC address %m changed to: %s 
GW_INET_ACCESS_POLICY_END_MAC,정책 %s 가 중단되었습니다.; MAC 주소 %m의 인터넷 접속이 변경되었습니다.: %s 
#From:tsc.intro.Sch,The Schedule configuration option is used to manage schedule rules for various firewall and parental control features. 
tsc.intro.Sch,여러가지 방화벽과 자녀 보호 기능을 위한 스케쥴을 관리하는데 사용되는 스케쥴 설정 옵션입니다. 
#From:LW54,Fragmentation will occur when frame size in bytes is greater than the Fragmentation Threshold. 
LW54,프레임 사이즈가 프레그멘테이션 값보다 클 경우 프레그멘테이션이 적용됩니다.
#From:TA7,If you already have a DHCP server on your network or are using static IP addresses on all the devices on your network, uncheck <strong>Enable DHCP Server </strong> to disable this feature. 
TA7,네트워크에 DHCP 서버가 이미 동작 중이거나 허브로 사용하실 경우에는 이 기능을 비활성화하기 위해 <strong>DHCP 서버 설정 </strong> 의 체크를 없애십시오.
#From:GW_WLAN_ACCESS_DENIED,Access denied to wireless system with MAC address %m 
GW_WLAN_ACCESS_DENIED,%m MAC 주소의 무선 시스템 접근 제한 
#From:262,Local Domain Name 
262,로컬 도메인 이름
#From:help79,This option is enabled by default so that your router will automatically determine which programs should have network priority. 
help79,이 옵션은 특정 프로그램이 네트워크의 우선순위를 공유기로부터 자동으로 할당받기 위해 기본값으로 활성화 되어 있습니다.
#From:GW_BIGPOND_CONFIG,BigPond not configured properly 
GW_BIGPOND_CONFIG,적절하게 설정되지 않은 BigPond 
#From:KR74,The IP address of the this device on the local area network. 
KR74,장비의 로컬 LAN IP 주소 
#From:.sdi.s3,Establishing (please wait...) 
.sdi.s3,연결 중 (기다려 주십시오...)
#From:aw.TP.0,High 
aw.TP.0,높음
#From:tsc.pingt,Ping Test 
tsc.pingt,Ping 테스트 
#From:.WPApersonal,WPA-Personal 
.WPApersonal,WPA-Personal 
#From:.email,EMail Settings 
.email,이메일 설정
#From:bws.DFWK,Default WEP Key 
bws.DFWK,디폴트 WEP Key
#From:PPPOE_EVENT_DISCOVERY_REQUEST,PPPoE confirming session offer 
PPPOE_EVENT_DISCOVERY_REQUEST,PPPoE 컨펌 세션 제공
#From:wwa.wanmode.sipa,Static IP Address connection 
wwa.wanmode.sipa,고정 IP 주소 연결 
#F
#From:.firewall,Firewall 
.firewall,방화벽
#From:.syscheck,System Check 
.syscheck,시스템 확인
#From:help784,The LAN-side IP address of the client. 
help784,클라이언트의 LAN 구간 IP 주소.
#From:LW46,If you are new to wireless networking and have never configured a wireless router before, click on <strong>Wireless Network Setup Wizard</strong> and the router will guide you through a few simple steps to get your wireless network up and running. 
LW46,무선 네트워크 설정에 익숙하지 않거나 설정해 본 경험이 없다면 <strong>무선 네트워크 설정 마법사</strong> 를 이용하여 보다 쉽게 무선 공유기를 설정할 수 있습니다.
#From:IPSMTPCLIENT_RESOLVED_DNS,SMTP (Email) server %s is at IP address %v 
IPSMTPCLIENT_RESOLVED_DNS,SMTP (Email) 서버 %s 의 IP 주소는 %v 입니다.
#From:help663,Remote Authentication Dial-In User Service allows for remote users to dial into a central server and be authenticated in order to access resources on a network 
help663,네트워크 자원에 접근하려면 Remote Authentication Dial-In User Service 를 통해 인증을 받아야 합니다.
#From:help110,Interface: 
help110,Interface: 
#From:YM107,Invalid PPTP gateway IP address 
YM107,유효하지 않은 PPTP 게이트웨이 IP 주소 
#From:UNKNOWN,Unknown 
UNKNOWN,Unknown 
#From:YM180,The timeout value cannot be greater than 8760. 
YM180,시간초과 설정값은 8760 보다 작아야 합니다. 
#From:help322,Your D-Link router uses 192.168.0.1 for the IP address. You've assigned a computer that you want to designate as a Web server with a static IP address of 192.168.0.3. You've assigned another computer that you want to designate as an FTP server with a static IP address of 192.168.0.4. Therefore the starting IP address for your DHCP IP address range needs to be 192.168.0.5 or greater. 
help322,본 공유기는 192.168.0.1 를 IP 주소로 사용하고 있습니다. 웹 서버를 192.168.0.3 으로 설정하고, FTP 서버를 192.168.0.4 로 설정하였다면 DHCP IP 주소의 범위는 192.168.0.5 이상이어야 합니다. 
#From:help.upnp.1,UPnP is short for Universal Plug and Play, which is a networking architecture that provides compatibility among networking equipment, software, and peripherals. This router has optional UPnP capability, and can work with other UPnP devices and software. 
help.upnp.1,UPnP는 Universal Plug and Play의 약자로 네트워크 장비와 스포트웨어 주변장치간에 호환성을 제공하는 네트워킹 아키텍쳐입니다. 이 공유기는 UPnP 기능을 지원하므로 다른 UPnP 장비와 소프트웨어와 호환됩니다.
#From:GW_WAN_WAN_SUBNET_INVALID,Invalid WAN subnet mask %v 
GW_WAN_WAN_SUBNET_INVALID,유효하지 않은 WAN 서브넷 마스크 %v 
#From:gw.gm.61,Wolfenstein: Enemy Territory 
gw.gm.61,Wolfenstein: Enemy Territory 
#From:help748,Wi-Fi 
help748,Wi-Fi 
#From:help181,Setting the Fragmentation value too low may result in poor performance. 
help181,프래그멘테이션이 너무 작아 성능의 저하를 초래할 수 있습니다.
#From:.optional,(optional) 
.optional,(optional) 
#From:hhwf.intro,Create a list of Web sites to which you would like to allow access from the devices on your network. 
hhwf.intro,내부 네트워크에서 접근 가능한 웹 서버의 목록을 생성하십시오.
#From:GW_NAT_DMZ_DISABLED_WARNING,<warn>DMZ is disabled because the LAN subnet has been changed.</warn> 
GW_NAT_DMZ_DISABLED_WARNING,<warn>LAN 서브넷이 변경되어 DMZ 가 비활성화 되었습니다.</warn>
#From:YM93,Do you want to disable the DHCP Reservation entry for IP Address 
YM93,DHCP 의 IP reservation 기능을 비활성화 하시겠습니까?
#From:anet.intro,If you are not familiar with these Advanced Network settings, please read the help section before attempting to modify these settings. 
anet.intro,고급 네트워크 설정이 익숙하지 않다면, 설정을 변경하기 전에 도움말 항목을 참조하시기 바랍니다.
#From:GW_NAT_FTP_ALG_ACTIVATED_WARNING,<warn>The FTP ALG has been automatically enabled because a virtual server entry you created requires it.</warn> 
GW_NAT_FTP_ALG_ACTIVATED_WARNING,<warn>생성한 가상 서버가 FTP ALG 기능을 자동으로 활성화 하였습니다.</warn>
#From:.aa.bsecure.free_host,Free Host 
.aa.bsecure.free_host,Free Host 
#From:help862,Enter the email address where you want the email sent. 
help862,전자메일을 보낼 IP 주소를 입력하십시오. 
#From:ta.GWN,Gateway Name 
ta.GWN,게이트웨이 이름
#From:wprn.tt3,If you are not authorized to modify the router's configuration, contact the router administrator. 
wprn.tt3,공유기 설정 권한이 없습니다. 관리자에게 문의하십시오.
#From:help293,MTU: 
help293,MTU: 
#From:help265.2,If your ISP has assigned a fixed IP address, select this option. The ISP provides the value for the 
help265.2,ISP 로부터 고정 IP 주소를 할당받았다면, 이 옵션을 선택하시기 바랍니다. The ISP provides the value for the 
#From:IPNAT_UNABLE_TO_CREATE_CONNECTION,Dropped packet from %v to %v (IP protocol %u) as unable to create new session 
IPNAT_UNABLE_TO_CREATE_CONNECTION,새로운 세션을 생성할 수 없어 %v 에서 %v 로 (IP 프로토콜 %u) 패킷을 폐기하였습니다. 
#From:help270,Always on: 
help270,Always on: 
#From:sl.alert.3,Email notification is not enabled. 
sl.alert.3,전자메일 알림 기능이 활성화 되지 않았습니다. 
#From:.r.alert2,Invalid Netmask for route 
.r.alert2,해당 경로에 대한 서브넷 마스크가 유효하지 않습니다.
#From:aw.title.2,Advanced Wireless Settings 
aw.title.2,고급 무선 설정
#From:.firewalls,Firewall Settings 
.firewalls,방화벽 설정
#From:LS47,Invalid MAC Address 
LS47,유효하지 않은 MAC 주소 
#From:help186,Enables 802.11d operation. 802.11d is a wireless specification for operation in additional regulatory domains. This supplement to the 802.11 specifications defines the physical layer requirements (channelization, hopping patterns, new values for current MIB attributes, and other requirements to extend the operation of 802.11 WLANs to new regulatory domains (countries). The current 802.11 standard defines operation in only a few regulatory domains (countries). This supplement adds the requirements and definitions necessary to allow 802.11 WLAN equipment to operate in markets not served by the current standard. Enable this option if you are operating in one of these "additional regulatory domainsins". 
help186,Enables 802.11d operation. 802.11d is a wireless specification for operation in additional regulatory domains. This supplement to the 802.11 specifications defines the physical layer requirements (channelization, hopping patterns, new values for current MIB attributes, and other requirements to extend the operation of 802.11 WLANs to new regulatory domains (countries). The current 802.11 standard defines operation in only a few regulatory domains (countries). This supplement adds the requirements and definitions necessary to allow 802.11 WLAN equipment to operate in markets not served by the current standard. Enable this option if you are operating in one of these "additional regulatory domains". 
#From:GW_DHCP_SERVER_SUBNET_SIZE_INVALID,LAN subnet mask leaves no addresses for DHCP server to use. 
GW_DHCP_SERVER_SUBNET_SIZE_INVALID,LAN subnet mask leaves no addresses for DHCP server to use. 
#From:GW_INET_ACCESS_POLICY_TOO_MANY_MAC_INVALID,You cannot add new MAC address %m. You can only reuse MAC addresses from other policies. 
GW_INET_ACCESS_POLICY_TOO_MANY_MAC_INVALID,MAC 주소 %m 를 새로 추가할 수 없습니다. MAC 주소는 다른 정책 설정 시 재사용할 수 있습니다.
#From:PPPOE_EVENT_UP,PPPoE session 0x%04X established 
PPPOE_EVENT_UP,PPPoE 세션 0x%04X 이 이루어졌습니다. 
#From:.protocol,Protocol 
.protocol,프로토콜
#From:help372,WPA-Personal and WPA-Enterprise 
help372,WPA-Personal and WPA-Enterprise 
#From:up.tz.32,(GMT+02:00) Bucharest 
up.tz.32,(GMT+02:00) Bucharest 
#From:at.kbps,kbps 
at.kbps,kbps 
#From:GW_FIREWALL_START_IP_ADDRESS_INVALID,Start IP address must be less than end IP address: %v-%v 
GW_FIREWALL_START_IP_ADDRESS_INVALID,시작 IP 주소는 마지막 IP 주소 보다 작아야 합니다: %v-%v 
#From:YM8,seconds. 
YM8,초.
#From:GW_WISH_RULES_PRIORITY_RANGE,'%s': Priority, %u, needs to be between 0 and 7 
GW_WISH_RULES_PRIORITY_RANGE,%s': 우선순위, %u 는 0과 7 사이의 값이어야 합니다. 
#From:.aa.bsecure.travel,Travel 
.aa.bsecure.travel,Travel 
#From:at.Cable,Cable Or Other Broadband Network 
at.Cable,Cable 또는 기타 Broadband Network
#From:help113,The route metric is a value from 1 to 16 that indicates the cost of using this route. A value of 1 is the lowest cost, and 15 is the highest cost. A value of 16 indicates that the route is not reachable from this router. When trying to reach a particular destination, computers on your network will select the best route, ignoring unreachable routes. 
help113,The route metric is a value from 1 to 16 that indicates the cost of using this route. A value of 1 is the lowest cost, and 15 is the highest cost. A value of 16 indicates that the route is not reachable from this router. When trying to reach a particular destination, computers on your network will select the best route, ignoring unreachable routes. 
#From:GW_WLAN_11A_CH_MID_BAND_WARN,<warn>Not all station are able to operate in channel 100-140. Please change channel if the station fails to connect.</warn> 
GW_WLAN_11A_CH_MID_BAND_WARN,<warn>모든 스테이션이 100-140 채널에서 동작 할 수 없습니다. 스테이션이 연결에 실패할 경우 채널을 변경하십시오.</warn>
#From:ZM6,BigPond Client 
ZM6,BigPond Client 
#From:anet.wp.1,100Mbps 
anet.wp.1,100Mbps 
#From:help17,Assign a meaningful name to the virtual server, for example <code>Web Server</code>. Several well-known types of virtual server are available from the "Application Name" drop-down list. Selecting one of these entries fills some of the remaining parameters with standard values for that type of server. 
help17,Assign a meaningful name to the virtual server, for example <code>Web Server</code>. Several well-known types of virtual server are available from the "Application Name" drop-down list. Selecting one of these entries fills some of the remaining parameters with standard values for that type of server. 
#From:ta.intro.Adm2,By default there is no password configured. It is highly recommended that you create a password to keep your router secure. 
ta.intro.Adm2,기본 설정에는 암호가 설정되어 있지 않습니다. 공유기의 보안을 위하여 암호를 설정하시기 바랍니다.
#From:tool.admin.check,, Please check 
tool.admin.check,, 확인하십시오 
#From:bws.length,(length applies to all keys) 
bws.length,(모든 키에 적용되는 길이)
#From:help836,The WCN ActiveX Control provides the necessary WCN link between the router and your PC via the browser. The browser will attempt to download the WCN ActiveX Control, if it is not already available on your PC. For this action to succeed, the WAN connection must be established, and the browser's internet security setting must be Medium or lower (select Tools &rarr; Internet Options &rarr; Security &rarr; Custom Level &rarr; Medium). 
help836,The WCN ActiveX Control provides the necessary WCN link between the router and your PC via the browser. The browser will attempt to download the WCN ActiveX Control, if it is not already available on your PC. For this action to succeed, the WAN connection must be established, and the browser's internet security setting must be Medium or lower (select Tools &rarr; Internet Options &rarr; Security &rarr; Custom Level &rarr; Medium). 
#From:rs.intro.2,Try the restore again with valid restore configuration file. 
rs.intro.2,유효한 설정 파일로 설정 복구를 재시도 하시기 바랍니다.
#From:help900,After configuring the router for dynamic DNS, you can open a browser and navigate to the URL for your domain (for example <code>http://www.mydomain.info</code>) and the router will attempt to forward the request to port 80 on your LAN. If, however, you do this from a LAN-side computer and there is no virtual server defined for port 80, the router will return the router's configuration home page. Refer to the <a href="../Advanced/Virtual_Server.shtml">Advanced &rarr; Virtual&nbsp;Server</a> configuration page to set up a virtual server. 
help900,After configuring the router for dynamic DNS, you can open a browser and navigate to the URL for your domain (for example <code>http://www.mydomain.info</code>) and the router will attempt to forward the request to port 80 on your LAN. If, however, you do this from a LAN-side computer and there is no virtual server defined for port 80, the router will return the router's configuration home page. Refer to the <a href="../Advanced/Virtual_Server.shtml">Advanced &rarr; VirtualServer</a> configuration page to set up a virtual server. 
#From:help598,Light Emitting Diode 
help598,발광 다이오드 
#From:GW_INET_ACL_IP_ADDRESS_DUPLICATION_INVALID,IP address %v already exists. 
GW_INET_ACL_IP_ADDRESS_DUPLICATION_INVALID,IP 주소 %v 가 이미 사용 중입니다. 
#From:KR7,You must be logged in as Administrator to use these features. 
KR7,이 기능을 사용하려면 관리자 계정으로 로그인해야 합니다.
#From:help761,xDSL 
help761,xDSL 
#From:ZM1,(automatically disabled if UPnP is enabled) 
ZM1,(UPnP 기능이 활성화 되면 자동으로 비활성화 됩니다) 
#From:help510,IP address that is assigned by a DHCP server and that may change. Cable Internet providers usually use this method to assign IP addresses to their customers. 
help510,IP address that is assigned by a DHCP server and that may change. Cable Internet providers usually use this method to assign IP addresses to their customers. 
#From:hhta.831,Select a filter that controls access as needed for this admin port. If you do not see the filter you need in the list of filters, go to the <a href="../Advanced/Inbound_Filter.shtml" onclick="return jump_if();">Advanced &rarr;&nbsp;Inbound&nbsp;Filter</a> screen and create a new filter. 
hhta.831,관리 포트의 접근을 제어하기 위해 설정된 필터를 선택하십시오. 필요한 필터가 목록에 없으면  <a href="../Advanced/Inbound_Filter.shtml" onclick="return jump_if();">고급 -> 수신필터</a> 에서 새로운 필터를 생성하시기 바랍니다.
#From:LW30,Manual Internet Connection Setup 
LW30,인터넷 연결 직접 설정 
#From:.stop,Stop 
.stop,Stop 
#From:YM110,Invalid L2TP subnet mask 
YM110,유효하지 않은 L2TP 서브넷 마스크 
#From:GW_SYSLOG_STATUS,Syslog server set as IP address %v 
GW_SYSLOG_STATUS,Syslog 서버의 주소를 IP 주소 %v 로 설정합니다. 
#From:bd.NETBIOS_REG_TYPE_P,Point-to-Point (no broadcast) 
bd.NETBIOS_REG_TYPE_P,Point-to-Point (no broadcast) 
#From:GW_LAN_SUBNET_MASK_INVALID,LAN subnet mask is invalid. 
GW_LAN_SUBNET_MASK_INVALID,LAN 서브넷 마스크가 유효하지 않습니다.
#From:bd.title.DHCPSSt,DHCP Server Settings 
bd.title.DHCPSSt,DHCP 서버 설정
#From:help827,The name of the router can be changed here. 
help827,여기서 공유기의 이름을 변경할 수 있습니다.
#From:tf.FWInf,Firmware Information 
tf.FWInf,펌웨어 정보
#From:hhai.ipr,Up to eight ranges of WAN IP addresses can be controlled by each rule. The checkbox by each IP range can be used to disable ranges already defined. 
hhai.ipr,최대 8개의 WAN IP 주소 범위를 각각의 규칙으로 관리할 수 있습니다. 각 IP 범위의 체크박스를 이용하여 설정된 범위를 활성화 또는 비활성화 할 수 있습니다.
#From:YM88,No more reservations may be created 
YM88,더 이상의 예약 기능을 설정할 수 없습니다.
#From:GW_DHCP_SERVER_NETBIOS_PRIMARY_WINS_INVALID,Invalid primary WINS IP address 
GW_DHCP_SERVER_NETBIOS_PRIMARY_WINS_INVALID,유효하지 않은 1차 WINS IP 주소입니다.
#From:hhaw.1,It is recommended that you leave these parameters at their default values. Adjusting them could limit the performance of your wireless network. 
hhaw.1,이 항목은 초기값으로 유지하십시오. 이 항목을 변경하는 것은 무선 네트워크의 성능을 저하시킬 수 있습니다.
#From:YM187,Name (if any) 
YM187,Name (if any) 
#From:GW_NAT_NAME_UNDEFINED_INVALID,%s name %s of '%s' is not defined. 
GW_NAT_NAME_UNDEFINED_INVALID,%s' 의 %s name %s 이 지정되지 않았습니다. 
#From:GW_WIRELESS_RADAR_DETECTED,Wireless radar detected on channel %d 
GW_WIRELESS_RADAR_DETECTED,무선 주파수가 채널 %d 로 검색되었습니다.
#From:tt.EnNTP,Enable NTP Server 
tt.EnNTP,NTP 서버 활성화
#From:help34,Allows multiple VPN clients to connect to their corporate networks using IPSec. Some VPN clients support traversal of IPSec through NAT. This option may interfere with the operation of such VPN clients. If you are having trouble connecting with your corporate network, try disabling this option. 
help34,Allows multiple VPN clients to connect to their corporate networks using IPSec. Some VPN clients support traversal of IPSec through NAT. This option may interfere with the operation of such VPN clients. If you are having trouble connecting with your corporate network, try disabling this option. 
#From:LW25,Pre-shared Key 
LW25,Pre-shared Key 
#From:.rs.invalid,Restore Invalid 
.rs.invalid,복구가 잘못되었습니다. 
#From:help309,The subnet mask of your router on the local area network. 
help309,LAN 에 설치된  공유기의 서브넷 마스크 
#From:YM113,Invalid primary DNS server IP address 
YM113,유효하지 않은 1차 DNS 서버 IP 주소입니다.
#From:aa.alert.15,You cannot add new MAC addresses. You can only reuse MAC addresses from other policies. 
aa.alert.15,새로운 MAC 주소를 추가할 수 없습니다. MAC 주소는 다른 정책 설정 시 재사용할 수 있습니다.
#From:.savesettings,Save Settings 
.savesettings,설정 저장
#From:help193,Give the schedule a name that is meaningful to you, such as "Weekday rule". 
help193,스케쥴에 "주간 규칙"과 같이 알기 쉬운 이름을 부여하십시오.
#From:help14.p,Virtual Server Parameters 
help14.p,가상 서버 변수
#From:gw.gm.32,Need for Speed: Hot Pursuit 2 
gw.gm.32,Need for Speed: Hot Pursuit 2 
#From:IPNAT_TCP_BLOCKED_INGRESS_SYN,Blocked incoming TCP connection request from %v:%u to %v:%u 
IPNAT_TCP_BLOCKED_INGRESS_SYN,%v:%u 에서 %v:%u 로의 수신 TCP 연결 요청이 차단되었습니다. 
#From:tps.foo2,The printer's IP address and queue name are shown <a href="../Status/PS.shtml" onclick="return jump_if();">here</a>. 
tps.foo2,프린터의 IP 주소와 큐 이름은 <a href="../Status/PS.shtml" onclick="return jump_if();">here</a> 에서 확인할 수 있습니다.
#From:LW65,Wi-FI Protected Setup 
LW65,Wi-FI Protected 설정
#From:anet.msg.wan.ping,If you enable this feature, the WAN port of your router will respond to ping requests from the Internet that are sent to the WAN IP Address. 
anet.msg.wan.ping,이 기능을 활성화 하면, 인터넷에서 들어오는 WAN 포트의 IP로의 Ping 요청에 대해 응답을 하게 합니다.
#From:help285,L2TP Subnet Mask 
help285,L2TP 서브넷 마스크
#From:ai.intro.2,Inbound Filters can be used for limiting access to a server on your network to a system or group of systems. 
ai.intro.2,네트워크의 시스템 또는 시스템 그룹상의 서버 접속을 제한하는 수신 필터의 사용이 가능합니다. 
#From:ss.LANStats,LAN Statistics 
ss.LANStats,LAN 통계 자료 
#From:help584,IPsec 
help584,IPsec 
#From:ta.alert.4,A restore is already in progress. 
ta.alert.4,복구가 이미 진행 중입니다.
#From:.clone,Copy Your PC's MAC Address 
.clone,사용자 PC 의 MAC 주소 복사
#From:gw.gm.14,Diablo I and II 
gw.gm.14,Diablo I and II 
#From:PPTP_ALG_GRE_UNABLE_TO_HANDLE_HEADER,Dropped GRE packet from %v to %v as unable handle packet header 
PPTP_ALG_GRE_UNABLE_TO_HANDLE_HEADER,패킷 헤더를 처리할 수 없어 %v 에서 %v 로의 GRE 패킷을 차단하였습니다. 
#From:help716,A utility displays the routes between you computer and specific destination 
help716,A utility displays the routes between you computer and specific destination 
#From:.aa.block.some,Block Some Access 
.aa.block.some,일부 접속 제한 
#From:tt.time.24,11 pm 
tt.time.24,11 pm 
#From:help819.3,Established -- the connection is passing data. 
help819.3,Established -- the connection is passing data. 
#From:GW_WAN_DNS_SERVER_PRIMARY_INVALID,Invalid primary DNS server IP address: %v 
GW_WAN_DNS_SERVER_PRIMARY_INVALID,유효하지 않은 1차 DNS 서버 IP 주소: %v
#From:help182,This setting should remain at its default value of 2346 bytes. 
help182,이 설정은 기본 값인 2346 bytes 로 유지하십시오.
#From:KR21,The Wireless Device PIN is not valid 
KR21,무선 장비의 PIN 이 유효하지 않습니다.
#From:help873,Normally email is sent at the start time defined for a schedule, and the schedule end time is not used. However, rebooting the router during the schedule period will cause additional emails to be sent. 
help873,Normally email is sent at the start time defined for a schedule, and the schedule end time is not used. However, rebooting the router during the schedule period will cause additional emails to be sent. 
#From:ss.Collisions,Collisions 
ss.Collisions,충돌
#From:.aa.bsecure.personals,Personals 
.aa.bsecure.personals,Personals 
#From:aa.alert.12,IP address should be in LAN subnet. 
aa.alert.12,IP 주소는 LAN 서브넷에 포함되어야 합니다. 
#From:help863,Enter the SMTP server address for sending email. 
help863,전자메일 송신을 위하여 SMTP 서버의 주소를 입력하십시오.
#From:help397,This option enables configuration of an optional second RADIUS server. A second RADIUS server can be used as backup for the primary RADIUS server. The second RADIUS server is consulted only when the primary server is not available or not responding. The fields <span class="option">Second RADIUS Server IP Address</span>, <span class="option">RADIUS Server Port</span>, <span class="option">Second RADIUS server Shared Secret</span>, <span class="option">Second MAC Address Authentication</span> provide the corresponding parameters for the second RADIUS Server. 
help397,This option enables configuration of an optional second RADIUS server. A second RADIUS server can be used as backup for the primary RADIUS server. The second RADIUS server is consulted only when the primary server is not available or not responding. The fields <span class="option">Second RADIUS Server IP Address</span>, <span class="option">RADIUS Server Port</span>, <span class="option">Second RADIUS server Shared Secret</span>, <span class="option">Second MAC Address Authentication</span> provide the corresponding parameters for the second RADIUS Server. 
#From:av.title.VSL,Virtual Servers List 
av.title.VSL,가상 서버 목록
#From:.off,Off 
.off,Off 
#From:KR106,Enable anti-spoof checking 
KR106,anti-spoof 검사 확인
#From:help13,With this Virtual Server entry, all Internet traffic on Port 8888 will be redirected to your internal web server on port 80 at IP Address 192.168.0.50. 
help13,With this Virtual Server entry, all Internet traffic on Port 8888 will be redirected to your internal web server on port 80 at IP Address 192.168.0.50. 
#From:wwa.title.s3,Step 3: Configure your Internet Connection 
wwa.title.s3,Step 3: 인터넷 연결 설정하기
#From:wwa.wanmode.bigpond,BigPond 
wwa.wanmode.bigpond,BigPond 
#From:LW31,The following Web-based Setup Wizard is designed to assist you in your printer setup. This Setup Wizard will guide you through step-by-step instructions on how to set up your printer. 
LW31,아래의 웹기반 설정 마법사는 프린터 설정을 지원합니다. 설정 마법사가 프린터 설정 방법을 단계별로 안내할 것입니다.
#From:help440,Bit rate 
help440,Bit rate 
#From:GW_WAN_DNS_SERVER_SECONDARY_INVALID,Invalid secondary DNS server IP address: %v 
GW_WAN_DNS_SERVER_SECONDARY_INVALID,유효하지 않은 2차 DNS 서버 IP 주소: %v
#From:help254,The WAN (Wide Area Network) section is where you configure your Internet Connection type. 
help254,The WAN (Wide Area Network) section is where you configure your Internet Connection type. 
#From:tf.intro.FWCh,To check for the latest firmware, click the [Check Online Now...] button. 
tf.intro.FWCh,최신 펌웨어를 확인하려면 [Check Online Now...] 을 클릭하십시오. 
#From:LW29,If you would like to configure the Internet settings of your new D-Link Systems Router manually, then click on the button below. 
LW29,D-Link Systems 의 공유기를 직접 설정하려면 아래 버튼을 클릭하십시오.
#From:haf.dmz.70,To handle incoming connections that use a protocol other than ICMP, TCP, UDP, and IGMP (also GRE and ESP, when these protocols are enabled by the PPTP and IPSec ALGs ). 
haf.dmz.70,수신 연결을 처리하기 위해 ICMP, TCP, UDP, IGMP,GRE, ESP(PPTP와 IPSec ALG에서 설정 된 경우) 이외의 프로토콜을 사용합니다.)
#From:YM55,Invalid remote end IP Address. 
YM55,유효하지 않은 원격 종단 IP 주소 
#From:GW_SCHED_ATTACH_FAILED,System error occured when attaching with schedule %s 
GW_SCHED_ATTACH_FAILED,스케쥴 %s 를 설정하는 동안 시스템 오류가 발생했습니다. 
#From:ts.ss,Save To Local Hard Drive 
ts.ss,로컬 드라이브에 저장 
#From:KR80,Check this box to allow the DHCP Server to offer NetBIOS configuration settings to the LAN hosts. 
KR80,DHCP 서버가 LAN 호스트에게 NetBIOS 설정을 제공하려면 이 상자를 체크하십시오.
#From:.badssid,The SSID field can not be blank 
.badssid,SSID 항목은 비워 둘 수 없습니다.
#From:RUNTIME_CONFIG_STORING_CONFIG_IN_NVRAM,Stored configuration to non-volatile memory 
RUNTIME_CONFIG_STORING_CONFIG_IN_NVRAM,NVRAM 에 저장된 설정
#From:YM100,Invalid WAN subnet mask 
YM100,유효하지 않은 WAN 서브넷 마스크 
#From:help410,Asymmetric Digital Subscriber Line 
help410,Asymmetric Digital Subscriber Line 
#From:FW_UPDATE_AVAILABLE,Firmware Update is Available 
FW_UPDATE_AVAILABLE,펌웨어 업데이트가 가능합니다.
#From:help891,The Dynamic DNS feature allows you to host a server (Web, FTP, Game Server, etc.) using a domain name that you have purchased (www.whateveryournameis.com) with your dynamically assigned IP address. Most broadband Internet Service Providers assign dynamic (changing) IP addresses. When you use a Dynamic DNS service provider, your friends can enter your host name to connect to your server, no matter what your IP address is. 
help891,The Dynamic DNS feature allows you to host a server (Web, FTP, Game Server, etc.) using a domain name that you have purchased (www.whateveryournameis.com) with your dynamically assigned IP address. Most broadband Internet Service Providers assign dynamic (changing) IP addresses. When you use a Dynamic DNS service provider, your friends can enter your host name to connect to your server, no matter what your IP address is. 
#From:help777,PPPoE, PPTP, L2TP Connection 
help777,PPPoE, PPTP, L2TP Connection 
#From:help480,dBi 
help480,dBi 
#From:help393,MAC Address Authentication: 
help393,MAC Address Authentication: 
#From:bwn.ict,Internet Connection Type 
bwn.ict,인터넷 연결 타입
#From:.wakeonlan,Wake-On-LAN 
.wakeonlan,Wake-On-LAN 
#From:rs.intro.3,The device may be too busy to properly receive it right now. Please try the restore again. It is also possible that you are logged in as a 'user' instead of an 'admin' - only administrators can restore the configuration file. Please check the system log for any errors. 
rs.intro.3,시스템 처리량이 너무 많아 제대로 수신하지 못했습니다. 저장을 다시 시도하십시오. 관리자 모드가 아닌 사용자 모드로 접속하여 저장이 안 될 수도 있습니다 - 관리자 많이 설정 파일을 저장할 수 있습니다. 시스템 오류 로그를 확인하십시오.
#From:help559,IEEE 
help559,IEEE 
#From:tt.Jun,Jun 
tt.Jun,Jun 
#From:YM47,PalTalk 
YM47,PalTalk 
#From:YM7,You will be redirected to the login page in: 
YM7,로그인 페이지로 이동합니다.
#From:YM124g,If you are not utilizing Super G with Dynamic Turbo for its speed improvements, enable Auto Channel Scan so that the router can select the best possible channel for your wireless network to operate on. 
YM124g,속도 향상을 위해 Super G with Dynamic Turbo 를 사용하지 않은 경우, 공유기가 동작할 수 있는 적절한 무선 네트워크의 채널을 스캔할 수 있도록 자동 채널 스캔을 설정하십시오. 
#From:GW_INET_ACL_MAC_ADDRESS_DUPLICATION_INVALID,MAC address %m already exists. 
GW_INET_ACL_MAC_ADDRESS_DUPLICATION_INVALID,MAC 주소 %m 는 이미 사용 중입니다.
#From:YM66,invalid destination starting IP Address. 
YM66,유효하지 않은 목적지 시작  IP 주소.
#From:LT124,optional 
LT124,optional 
#From:IPL2TP_TUNNEL_CONNECTED,L2TP local tunnel 0x%04X has been connected to "%s" 
IPL2TP_TUNNEL_CONNECTED,L2TP 로컬 터컬 0x%04X 이 "%s" 에 연결 되었습니다. 
#From:gw.gm.9,Command and Conquer Zero Hour 
gw.gm.9,Command and Conquer Zero Hour 
#From:help516,Ethernet 
help516,이더넷
#From:gw.gm.2,Aliens vs. Predator 
gw.gm.2,Aliens vs. Predator 
#From:bd.NETBIOS,NetBIOS Advertisement 
bd.NETBIOS,NetBIOS 알림
#From:sa.Target,Target 
sa.Target,Target 
#From:help56.a,This section is where you define application rules. 
help56.a,This section is where you define application rules. 
#From:wwl.wl.wiz,Wireless Network Setup Wizard 
wwl.wl.wiz,무선 네트워크 설정 마법사
#From:network.dhcp.range,DHCP Range Invalid, FROM not bigger than TO 
network.dhcp.range,DHCP 범위가 유효하지 않습니다, FROM 이 TO 보다 크지 않습니다.
#From:GW_DHCP_SERVER_RECONFIG_WARNING,<warn>DHCP Server is being reconfigured because the LAN subnet is not suitable, please ensure your server remains correct.</warn> 
GW_DHCP_SERVER_RECONFIG_WARNING,<warn>LAN 서브넷이 적절하지 않아 DHCP 서버가 다시 설정되고 있습니다. 서버의 설정이 정확한지 확인하십시오.</warn>
#From:wprn.intro6,Step 4: Print a test page 
wprn.intro6,Step 4: 테스트 페이지 출력
#From:GW_BIGPOND_FAIL,BigPond failed, state=%d with error=%d, server response=%s 
GW_BIGPOND_FAIL,BigPond failed, state=%d with error=%d, server response=%s 
#From:wwa.title.set.pptp,Set Username and Password Connection (PPTP) 
wwa.title.set.pptp,사용자명 비밀번호 연결 설정 (PPTP)
#From:af.EFT.1,Address Restricted 
af.EFT.1,주소가 제한되었습니다. 
#From:.use_unicasting,Use Unicasting 
.use_unicasting,유니캐스트 사용
#From:.wifisc.addfail,Failed 
.wifisc.addfail,실패하였습니다. 
#From:GW_WLAN_BEACON_PERIOD_INVALID,Beacon period should be between 20 and 1000. 
GW_WLAN_BEACON_PERIOD_INVALID,무선 SSID 광고 주기는 20 에서 1000 사이를 입력하십시오.
#From:.networkstate,Network Status 
.networkstate,네트워크 상태
#From:YM79,Best Effort (BE) 
YM79,Best Effort (BE) 
#From:YM32,Invalid Aggregation Max Size 
YM32,유효하지 않은 애그리게이션 최대 크기 
#From:ta.intro.wcn,This will save the current wireless configuration from the router to your computer through Microsoft's Windows Connect Now technology and allow future propagation of the setting through Microsoft's Wireless Network Setup Wizard. 
ta.intro.wcn,마이크로 소프트 윈도우즈 커넥터 나우 기술을 통해 공유기에서 컴퓨터로  현재 무선 설정을 저장하고 마이크로소프트 네트워크 설정 마법사를 통한 설정 전파도 가능합니다.  
#From:tt.Year,Year 
tt.Year,년 
#From:wwl.text.better,Select this option if your wireless adapters SUPPORT WPA 
wwl.text.better,무선 어댑터가 WPA 를 지원한다면 이 옵션을 선택하십시오
#From:IPASYNCFILEUSB_MOUNT_FAILED,Failed to mount USB device 
IPASYNCFILEUSB_MOUNT_FAILED,USB 장비를 설치하는데 실패했습니다 
#From:.hostname.eg,(e.g.: me.mydomain.net) 
.hostname.eg,(e.g.: me.mydomain.net) 
#From:YM78,Background (BK) 
YM78,Background (BK) 
#From:af.UEFT,UDP Endpoint Filtering 
af.UEFT,UDP 엔드포인트 필터링
#From:help413,Alphanumeric 
help413,Alphanumeric 
#From:sd.channel,Channel 
sd.channel,채널
#From:help356,By default the fastest possible transmission rate will be selected. You have the option of selecting the speed if necessary. 
help356,기본값으로 가장 빠른 전송속도가 설정됩니다. 필요한 경우 전송속도를 선택할 수 있습니다.
#From:KR53,Note that different LAN computers cannot be associated with Port Forwarding rules that contain any ports in common; such rules would contradict each other. 
KR53,다른 컴퓨터들이 포트 포워딩 규칙을 공통으로 갖고 있는 컴퓨터들과 통신이 되지 않는 것에 주의하십시오. 이런 규칙이 서로 상반될 수 있습니다. 
#From:help381,Pre-Shared Key: 
help381,Pre-Shared Key: 
#From:.inboundfilter,Inbound Filter 
.inboundfilter,수신 필터 
#From:LW16,<strong>Lock Wireless Security Settings</strong> after all wireless network devices have been configured. 
LW16,모든 무선 네트워크 장비를 설정한 후에 <strong>무선 보안 설정 잠금</strong> 하십시오. 
#From:KR108,This mechanism protects against activity from spoofed or forged IP addresses, mainly by blocking packets appearing on interfaces and in directions which are logically not possible. 
KR108,이 메카니즘은 주로 논리적으로 불가능한 방향이나 인터페이스상에서 나타나는 패킷을 차단하여 조작된 IP 주소로 부터 네트워크를 보호합니다.  
#From:.aa.apply.port.filter,Apply Advanced Port Filters 
.aa.apply.port.filter,고급 포트 필터 적용
#From:GW_NAT_TCP,TCP 
GW_NAT_TCP,TCP 
#From:help619,Maximum Transmission Unit is the largest packet that can be transmitted on a packet-based network like the Internet 
help619,Maximum Transmission Unit is the largest packet that can be transmitted on a packet-based network like the Internet 
#From:aa.FPR.c7,Dest<br />Port<br />End 
aa.FPR.c7,Dest<br />Port<br />End 
#From:gw.gm.27,Jedi Knight III: Jedi Academy 
gw.gm.27,Jedi Knight III: Jedi Academy 
#From:BIGPOND_NOT_PROPERLY_CFGD,BigPond not properly configured 
BIGPOND_NOT_PROPERLY_CFGD,BigPond 가 제대로 설정되었습니다. 
#From:help202,This router has a USB port; so, if you have a USB flash drive, a USB port on your PC, and your PC runs Windows XP Service Pack 2 (SP2) or later, you can transfer wireless configuration data between your PC and the router with the USB flash drive. Go to the Windows Control Panel and select Wireless Network Setup Wizard. The Wireless Network Setup Wizard gives you the choices: "Use a USB flash drive" and "Set up a network manually". Select "Use a USB flash drive". 
help202,This router has a USB port; so, if you have a USB flash drive, a USB port on your PC, and your PC runs Windows XP Service Pack 2 (SP2) or later, you can transfer wireless configuration data between your PC and the router with the USB flash drive. Go to the Windows Control Panel and select Wireless Network Setup Wizard. The Wireless Network Setup Wizard gives you the choices: "Use a USB flash drive" and "Set up a network manually". Select "Use a USB flash drive". 
#From:up.tz.58,(GMT+08:00) Perth 
up.tz.58,(GMT+08:00) Perth 
#From:help335,As an alternative, you can locate a MAC address in a specific operating system by following the steps below: 
help335,As an alternative, you can locate a MAC address in a specific operating system by following the steps below: 
#From:CRIT,[CRIT] 
CRIT,[CRIT] 
#From:YM154,The rule applies to a flow of messages for which the other computer's IP address falls within the range set here. 
YM154,이 규칙은 다른 컴퓨터의 IP 주소가 여기에서 설정한 IP 범위에 해당하는 경우 메시지 흐름에 적용됩니다. 
#From:help76,The QoS Engine feature helps improve your network performance by prioritizing applications. 
help76,The QoS Engine feature helps improve your network performance by prioritizing applications. 
#From:help801,Clicking this button erases all log entries. 
help801,Clicking this button erases all log entries. 
#From:help521,A computer on a network that stores data so that the other computers on the network can all access it 
help521,A computer on a network that stores data so that the other computers on the network can all access it 
#From:GW_WISH_RULES_HOST1_PORT,'%s': Host 1 port start, %u, must be less than host 1 port end, %u 
GW_WISH_RULES_HOST1_PORT,%s': Host 1 port start, %u, must be less than host 1 port end, %u
#From:GW_WLAN_11G_TURBO_INVALID,For 11g Turbo mode, the channel should be set to 6. 
GW_WLAN_11G_TURBO_INVALID,11g Turbo mode 를 사용하려면 채널은 6번으로 선택하십시오. 
#From:tsc.pingt.msg105,Longest ping time (in milliseconds): 
tsc.pingt.msg105,Longest ping time (in milliseconds): 
#From:.aa.bsecure.entertainment,Entertainment 
.aa.bsecure.entertainment,Entertainment
#From:li.WJS,WARNING: JavaScript is not enabled for this browser! 
li.WJS,경고: JavaScript 가 설치되어 있지 않습니다!
#From:YM165,Inactive 
YM165,Inactive 
#From:te.ToEm,To Email Address 
te.ToEm,받는 메일(POP3)
#From:tt.time.1,12 am 
tt.time.1,12 am 
#From:help787,Signal 
help787,신호
#From:DHCP_CLIENT_GOT_LEASE,Obtained IP Address using DHCP. IP address is %v 
DHCP_CLIENT_GOT_LEASE,DHCP 로 부터 할당받은 IP. IP 주소는 %v 입니다. 
#From:wwl.s4.note,Note: You will need to enter the same password as keys in this step into your wireless clients in order to enable proper wireless communication. 
wwl.s4.note,주의: 적절한 무선 통신을 이루기 위해 이번 단계에서 설정한 동일한 key를 무선 클라이언트에 입력해야 합니다. 
#From:GW_EMAIL_SUBJ,Gateway Logs 
GW_EMAIL_SUBJ,게이트웨이 로그
#From:IPPORTTRIGGERALG_UDP_PACKET_ALLOC_FAILURE,Port trigger ALG failed to allocate session for UDP packet from %v:%u to %v:%u 
IPPORTTRIGGERALG_UDP_PACKET_ALLOC_FAILURE,포트 트리거 ALG가 %v:%u 에서 %v:%u 로의 UDP 패킷을 할당받기에 실패하였습니다.
#From:help494,DSSS: Modulation technique used by 802.11b wireless devices 
help494,DSSS: 802.11b 무선장치에 의해 사용되는 무선 변조(modulation) 기술 
#From:help48,Enter a name for the Special Application Rule, for example <code>Game App</code>, which will help you identify the rule in the future. Alternatively, you can select from the <span class="option">Application</span> list of common applications. 
help48,스페셜 응용프로그램 규칙 이름을 입력하십시오. 예, <code>Game App</code> 은 향휴 해당 규칙을 확인하는데 도움이 됩니다. 다른 방법으로 일반 응용프로그램 리스트 <span class="option">Application</span> 에서 선택할 수도 있습니다.
#From:help498,Domain Name System: Translates Domain Names to IP addresses 
help498,도메인명 시스템: 도메인 명을 IP 주소로 전환합니다. 
#From:bi.wiz,If you are new to networking and have never configured a router before, click on <span class="button_ref">Setup Wizard</span> and the router will guide you through a few simple steps to get your network up and running. 
bi.wiz,네트워크 및 라우터 설정을 처음으로 하신다면 <span class="button_ref">Setup Wizard</span> 을 클릭 하시기 바랍니다. 몇 가지 간단한 방법을 통해 네트워크 구성 및 운영이 가능합니다. 
#From:.aa.bsecure.lifestyles,Lifestyles 
.aa.bsecure.lifestyles,Lifestyles 
#From:EGRESS,Out 
EGRESS,Out 
#From:help628,Network Interface Card 
help628,Network Interface Card 
#From:help683,An encryption and decryption key that is generated for every communication session between two computers 
help683,두개의 컴퓨터 사이에 모든 커뮤니케이션 세션을 위한 암호화 및 비암호화
#From:.dhcpconn,DHCP Connection (Dynamic IP Address) 
.dhcpconn,DHCP 연결(유동 IP 주소)
#From:bln.title.Rtrset,Router Settings 
bln.title.Rtrset,공유기 설정
#From:hhpt.app,Check the <strong>Application Name</strong> drop down menu for a list of predefined applications. If you select one of the predefined applications, click the arrow button next to the drop down menu to fill out the corresponding field. 
hhpt.app,미리 정해진 응용프로그램 리스트의 드랍 다운 메뉴에서 <strong>응용프로그램 이름</strong> 을 확인하시기 바랍니다. 이미 정해진 응용프로그램 중 하나를 선택하신다면 드랍 다운 메뉴 옆의 화살표 버튼을 클릭하시기 바랍니다.
#From:.ps,Print Server 
.ps,프린터 서버
#From:1044,This entry is optional. Enter a domain name for the local network. The AP's DHCP server will give this domain name to the computers on the wireless LAN. So, for example, if you enter <code>mynetwork.net</code> here, and you have a wireless laptop with a name of <code>chris</code>, that laptop will be known as <code>chris.mynetwork.net</code>. 
1044,이 항목은 옵션사항 입니다. 로컬 네트워크의 도메인 명을 입력하시기 바랍니다. AP의 DHCP 서버가 무선랜에 연결되어 있는 컴퓨터에 도메인 명을 할당할 것입니다. - 예를 들면 <code>mynetwork.net</code> 를 입력하면  <code>chris</code> 이름을 가진, <code>chris.mynetwork.net</code> 으로 무선 랩탑이 할당됩니다. 
#From:wwl.text.best,Select this option if your wireless adapters SUPPORT WPA2 
wwl.text.best,WPA2을 지원하는 무선 랜카드를 사용하시는 경우 이 옵션을 선택하시기 바랍니다. 
#From:wwa.pptp.svraddr,PPTP Server IP Address (may be same as gateway) 
wwa.pptp.svraddr,PPTP 서버의 IP 주소 (gateway와 동일할 수도 있습니다. )
#From:hhte.intro,You may want to make the email settings similar to those of your email client program. 
hhte.intro,현재 사용중인 이메일 클라이언트 프로그램과 유사한 이메일 설정을 할 수 있습니다. 
#From:.LANComputers,LAN Computers 
.LANComputers,LAN 컴퓨터
#From:sd.TMode,Turbo Mode 
sd.TMode,Turbo Mode 
#From:wwa.setupwiz,Setup Wizard 
wwa.setupwiz,설치마법사
#From:as.NM,H.323 (Netmeeting) 
as.NM,H.323 (Netmeeting) 
#From:help264,and 
help264,and 
#From:bw.WDUU.note,(compatibility for some DHCP Servers) 
bw.WDUU.note,(일부 DHCP 서버와의 호환)
#From:GW_NAT_CONFLICTING_CONNECTIONS_LOG,Rule %s conflicts with an existing connection (%v:%u (public %v:%u)--->%v:%u). Connectivity to the rule may be affected until this connection ends. 
GW_NAT_CONFLICTING_CONNECTIONS_LOG,규칙 %s 은 현재 연결되어 있는 것과 충돌합니다. (%v:%u (public %v:%u)--->%v:%u). 이 연결이 종료될 때까지 이 규칙 연결이 영향을 받을 수도 있습니다. 
#From:as.MMS,MMS 
as.MMS,MMS 
#From:help93,The rule applies to a flow of messages whose LAN-side IP address falls within the range set here. 
help93,The rule applies to a flow of messages whose LAN-side IP address falls within the range set here. 
#From:.srvname,Service Name 
.srvname,서비스 이름
#From:tt.Minute,Minute 
tt.Minute,분
#From:GW_NAT_PORT_FORWARD_PORT_RANGE_INVALID,%s port range '%s' of '%s' is invalid. 
GW_NAT_PORT_FORWARD_PORT_RANGE_INVALID,%s' 의 %s port range '%s' 가 잘못되었습니다. 
#From:sa.State,상태
sa.State,State 
#From:help22,Select a filter that controls access as needed for this virtual server. If you do not see the filter you need in the list of filters, go to the <a href="../Advanced/Inbound_Filter.shtml"> Advanced&nbsp;&rarr;&nbsp;Inbound&nbsp;Filter</a> screen and create a new filter. 
help22,Select a filter that controls access as needed for this virtual server. If you do not see the filter you need in the list of filters, go to the <a href="../Advanced/Inbound_Filter.shtml"> Advanced&rarr;InboundFilter</a> screen and create a new filter. 
#From:tsc.pingt.h,Host Name and IP address
tsc.pingt.h,호스트 명 또는 IP 주소
#From:aw.dE,802.11d Enable
aw.dE,802.11d 설정
#From:ss.WStats,Wireless Statistics 
ss.WStats,무선 상세 정보 
#From:GW_INET_ACL_NO_FILTER_SELECTED_INVALID,Please select a filter. 
GW_INET_ACL_NO_FILTER_SELECTED_INVALID,필터 선택하시기 바랍니다.
#From:wprn.intro1,Welcome to the D-Link Printer Setup Wizard 
wprn.intro1,D-Link 프린트 설치 마법사를 실행합니다.
#From:help535,Gigabits per second 
help535,Gigabits per second 
#From:help889,When this option is enabled, your router will check online periodically to see if a newer version of the firmware is available. 
help889,When this option is enabled, your router will check online periodically to see if a newer version of the firmware is available. 
#From:tool.admin.pfname,Port Forwarding Item 
tool.admin.pfname,포트 포워딩 종류 
#From:as.H323,H.323 (NetMeeting) 
as.H323,H.323 (NetMeeting) 
#From:IPNAT_SESSION_ALREADY_EXISTS,Dropped packet from %v to %v (protocol %u) as session already exists 
IPNAT_SESSION_ALREADY_EXISTS,세션이 이미 있어서 %v 에서 %v로 (프로토콜 %u) 의 패킷이 폐기되었습니다. 
#From:GW_QOS_RULES_LOCAL_IP_END_SUBNET,'%s': Local IP end '%v' is not in the LAN subnet 
GW_QOS_RULES_LOCAL_IP_END_SUBNET,%s': Local IP 마지막  '%v' 가  LAN 서브넷에 없습니다. 
#From:wwa.title.set.bigpond,Set BigPond Cable Connection 
wwa.title.set.bigpond,BigPond 케이블 연결 설정
#From:bws.CT.2,AES 
bws.CT.2,AES 
#From:up.tz.16,(GMT-04:00) Santiago 
up.tz.16,(GMT-04:00) Santiago 
#From:GW_BIGPOND_STATUS,BigPond state changed, new state=%d 
GW_BIGPOND_STATUS,BigPond 상태변경, 새로운 상태 = %d
#From:.bsecure.parental.limits,Note that it is not possible to control access to web sites that use the secure HTTP protocol; that is, those whose URL is of the form <code>https://...</code>. 
.bsecure.parental.limits,<code>https://...</code>. URL을 사용하고 있는 보안 HTTP 프로토콜을 이용하는 사이트에는 접속통제가 가능하지 않음을 알려드립니다. 
#From:te.EnAuth,Enable Authentication 
te.EnAuth,인증 설정 
#From:wwa.msg.set.bigpond,To set up this connection you will need to have a Username and Password from your Internet Service Provider. You also need BigPond Server IP adress. If you do not have this information, please contact your ISP. 
wwa.msg.set.bigpond,연결을 설정하기 위해 ISP 사업자로부터 사용자 명, 패스워드 및 BigPond 서버 IP 주소를 받으시기 바랍니다.  만약 이같은 정보가 없다면 ISP 사업자에게 확인하십시오. 
#From:help848,Select this option if you want to synchronize the router's clock to a Network Time Server over the Internet. If you are using schedules or logs, this is the best way to ensure that the schedules and logs are kept accurate. 
help848,공유기 시간을  Network Time Server와 연동시키고 싶다면 이 옵션을 선택하시기 바랍니다. 스케쥴이나 로그를 사용하고 있다면 이들을 정확하게 유지하는 가장 좋은 방법입니다.
#From:help695,SPI 
help695,SPI 
#From:gw.gm.41,Return to Castle Wolfenstein 
gw.gm.41,Castle Wolfenstein로 돌아갑니다.
#From:aw.64,64 Kbytes 
aw.64,64 Kbytes 
#From:.aa.bsecure.humor,Humor 
.aa.bsecure.humor,Humor 
#From:KR92,P-Node, this indicates to use WINS servers ONLY. This setting is useful to force all NetBIOS operation to the configured WINS servers. You must have configured at least the primary WINS server IP to point to a working WINS server. 
KR92,P-Node는 WINS 서버의 사용을 지시합니다. 이 설정은 NetBIOS 작동이 WINS 서버를 설정하는것에 유용하게 사용됩니다. 1차 WINS 서버 IP를 동작중인 WINS 서버로 지정해야 합니다.
#From:KR13,Router Mode 
KR13,공유기 모드
#From:.aa.pol.wiz,Policy Wizard 
.aa.pol.wiz,정책 마법사
#From:IP_FILTERS,IP Filters 
IP_FILTERS,IP 필터
#From:GW_INET_ACL_POLICY_NAME_DUPLICATE_INVALID,Policy name can't be duplicated: %s. 
GW_INET_ACL_POLICY_NAME_DUPLICATE_INVALID,정책명은 중복될 수 없습니다: %s
#From:gw.gm.50,Starsiege Tribes 
gw.gm.50,Starsiege Tribes 
#From:YM136,The NAT does not forward any incoming connection requests with the same port address as an already establish connection. 
YM136,NAT는 이미 연결된 것과 같은 포트로 요청되는 모든 수신 연결 요청을 전달하지 않습니다. 
#From:TA3,Hardware Version 
TA3,하드웨어 버전
#From:wwa.intro.s3,Your Internet Connection could not be detected, please select your Internet Service Provider (ISP) from the list below. If your ISP is not listed; select the "Not Listed or Don't Know" option to manually configure your connection. 
wwa.intro.s3,현재 인터넷 연결이 확인되지 않습니다. 리스트에서 현재 ISP 사업자를 선택하시기 바랍니다. 만약 리스트에 없을경우, 기본적 연결을 위해 "리스트에 없거나 알 수 없습니다" 를 선택하시기 바랍니다.
#From:help740,Wide Area Network 
help740,Wide Area Network 
#From:help59,Individual (80, 68, 888) 
help59,개별 포트 (80, 68, 888)
#From:wps.reboot.need,Are you sure you want to reset the device to Unconfiged? 
wps.reboot.need,정말로 장비를 설정되지 않은 상태로 리셋 하시겠습니까? 
#From:at.DF,Dynamic Fragmentation 
at.DF,Dynamic Fragmentation 
#From:help360,Super G without Turbo: 
help360,Super G without Turbo: 
#From:tt.alert.dstchkmonth,DST end month must be different than DST start month 
tt.alert.dstchkmonth,DST 마지막 달은 DST 시작 달과 반드시 달라야 합니다.
#From:up.tz.23,(GMT-01:00) Cape Verde Is. 
up.tz.23,(GMT-01:00) Cape Verde Is. 
#From:help265.7,If the ISP's servers assign the router's IP addressing upon establishing a connection, select this option. 
help265.7,연결설정 시, ISP 서버가 공유기 IP 주소에 할당된다면 이 옵션을 선택하시기 바랍니다.
#From:.advanced,Advanced 
.advanced,고급
#From:STATIC_IP_ADDRESS,Static IP Address 
STATIC_IP_ADDRESS,고정 IP 주소
#From:hhsw.intro,This is a list of all wireless clients that are currently connected to your wireless router. 
hhsw.intro,현재 사용중인 무선 공유기에 연결되어 있는 모든 무선 클라이언트 리스트 입니다.
#From:wwl.title.s3,Step 2: Secure your Wireless Network 
wwl.title.s3,Step 2: 무선 네트워크 보안
#From:GW_WAN_PPTP_SERVER_IP_ADDRESS_INVALID,Invalid PPTP server IP address: %v 
GW_WAN_PPTP_SERVER_IP_ADDRESS_INVALID,유효하지 않은 PPTP 서버 IP 주소: %v
#From:wwl.alert.pv5.1,The Wireless Security Password must be 13 alphanumeric characters or 26 hex digits.
wwl.alert.pv5.1,무선 보안 비밀번호는 5자 또는 13자의 상용문자로 구성되어야 합니다.
#From:ish.menu,Menu 
ish.menu,Menu 
#From:up.tz.33,(GMT+02:00) Cairo 
up.tz.33,(GMT+02:00) Cairo 
#From:GW_FW_NOTIFY_FIRMWARE_ERROR,Failed to check for new firmware 
GW_FW_NOTIFY_FIRMWARE_ERROR,새로운 펌웨어 확인에 실패하였습니다.
#From:YM150,Video. 
YM150,Video. 
#From:GW_DHCP_SERVER_RESERVATION_IN_USE,The IP address %v is in use; you must Revoke its lease and reset the network settings for the device that uses it. 
GW_DHCP_SERVER_RESERVATION_IN_USE,IP 주소 %v는 현재 사용중 입니다. 리스를 취소하신 후 장비 사용을 위해 네트워크 설정을 리셋하시기 바랍니다. 
#From:.bsecure.more.info,More info... 
.bsecure.more.info,More info... 
#From:GW_NAT_INPUT_PORT,Firewall Port 
GW_NAT_INPUT_PORT,방화벽 포트 
#From:YM182,Latest Firmware Version 
YM182,가장 최근 펌웨어 버전 
#From:tt.week.2,2nd 
tt.week.2,2nd 
#From:tf.CFWV,Current Firmware Version 
tf.CFWV,현재 펌웨어 버전 
#From:LW3,1000Mbps 
LW3,1000Mbps 
#From:help3,Example: 
help3,Example: 
#From:.creator,Creator 
.creator,Creator 
#From:bln.title.DNSRly,DNS Relay 
bln.title.DNSRly,DNS 릴레이
#From:YM116,WPA Personal Key must be at least 8 characters. 
YM116,WPA Personal Key는 최소 8자여야 합니다. 
#From:help633,Used to synchronize the time of all the computers in a network 
help633,네트워크의 모든 컴퓨터의 시간을 동기화하는데 사용됩니다. 
#From:LW22,WEP Key 
LW22,WEP Key 
#From:OPEN,Open 
OPEN,Open 
#From:YM158,WISH Sessions 
YM158,WISH 세션
#From:ZM16,Send/Receive instance failure 
ZM16,보내기/받기 인스턴스 실패
#From:.aa.bsecure.select.age,Select Age Category 
.aa.bsecure.select.age,연령별 카테고리를 선택하십시오. 
#From:WIFISC_AP_RESET_COMPLETE,Reset by %s complete 
WIFISC_AP_RESET_COMPLETE,%s 에 의해 리셋이 완료되었습니다.
#From:bd.NETBIOS_REG,NetBIOS Registration mode 
bd.NETBIOS_REG,NetBIOS 등록 모드
#From:ish.glossary,Glossary 
ish.glossary,Glossary 
#From:wwl.s4.intro.z4,A longer WEP key is more secure than a short one 
wwl.s4.intro.z4,긴 WEP key가 짧은 WEP key보다 안전합니다.
#From:GW_LAN_GATEWAY_IP_ADDRESS_INVALID,LAN Gateway IP address is invalid. 
GW_LAN_GATEWAY_IP_ADDRESS_INVALID,LAN 게이트웨이 IP 주소가 유효하지 않습니다.
#From:GW_PURE_SETWLANSETTINGS24,HNAP SetWLanSettings24 set Enabled %s, SSIDBroadcast %s, Channel %d 
GW_PURE_SETWLANSETTINGS24,HNAP SetWLanSettings24 set Enabled %s, SSIDBroadcast %s, Channel %d 
#From:KR96,Saves the new or edited Schedule Rule. 
KR96,생성하였거나 수정한 스케쥴 규칙을 저장합니다. 
#From:help578,An ISP provides access to the Internet to individuals or companies 
help578,An ISP provides access to the Internet to individuals or companies
#From:help438,Beacon 
help438,Beacon 
#From:help508,Dynamic DNS is provided by companies to allow users with Dynamic IP addresses to obtain a Domain Name that will always by linked to their changing IP address. The IP address is updated by either client software running on a computer or by a router that supports Dynamic DNS, whenever the IP address changes 
help508,Dynamic DNS is provided by companies to allow users with Dynamic IP addresses to obtain a Domain Name that will always by linked to their changing IP address. The IP address is updated by either client software running on a computer or by a router that supports Dynamic DNS, whenever the IP address changes 
#From:help423,ASCII 
help423,ASCII 
#From:help118,By default, the Access Control feature is disabled. If you need Access Control, check this option. 
help118,By default, the Access Control feature is disabled. If you need Access Control, check this option. 
#From:GW_XML_CONFIG_GET_SUCCESS,Successfully exported configuration file 
GW_XML_CONFIG_GET_SUCCESS,설정 파일 불러오기에 성공하였습니다. 
#From:gw.gm.66,Shareaza 
gw.gm.66,Shareaza 
#From:.ask.nochange,Nothing has changed, save anyway? 
.ask.nochange,수정 사항이 없습니다. 그래도 저장하시겠습니까? 
#From:help312dr2,When DNS Relay is enabled, the router plays the role of a DNS server. DNS requests sent to the router are forwarded to the ISP's DNS server. This provides a constant DNS address that LAN computers can use, even when the router obtains a different DNS server address from the ISP upon re-establishing the WAN connection. You should disable DNS relay if you implement a LAN-side DNS server as a virtual server. 
help312dr2,When DNS Relay is enabled, the router plays the role of a DNS server. DNS requests sent to the router are forwarded to the ISP's DNS server. This provides a constant DNS address that LAN computers can use, even when the router obtains a different DNS server address from the ISP upon re-establishing the WAN connection. You should disable DNS relay if you implement a LAN-side DNS server as a virtual server.
#From:tsc.24hrs,All Day - 24 hrs 
tsc.24hrs,하루 종일 - 24 hrs 
#From:hhag.10,Check the <strong>Application Name</strong> drop down menu for a list of predefined applications. If you select one of the predefined applications, click the arrow button next to the drop down menu to fill out the corresponding field. 
hhag.10,드랍 다운 메뉴의 <strong>응용프로그램 이름</strong>을 확인하시기 바랍니다. 미리 지정된 응용프로그램을 선택한다면 드랍 다운 메뉴 옆의 화살표 버튼을 클릭하시기 바랍니다.
#From:help261,Some ISP's may check your computer's Host Name. The Host Name identifies your system to the ISP's server. This way they know your computer is eligible to receive an IP address. In other words, they know that you are paying for their service. 
help261,Some ISP's may check your computer's Host Name. The Host Name identifies your system to the ISP's server. This way they know your computer is eligible to receive an IP address. In other words, they know that you are paying for their service. 
#From:as.TPrt,Trigger Traffic Type 
as.TPrt,트리거 트래픽 종류 
#From:help28,This will happen if you have an Access Control Rule configured for this LAN machine. 
help28,This will happen if you have an Access Control Rule configured for this LAN machine. 
#From:tt.time.12,11 am 
tt.time.12,11 am 
#From:ss.reload,Refresh Statistics 
ss.reload,상세 통계 정보 새로 고침
#From:bws.msg.WPA.2,To achieve better wireless performance use <strong>WPA2 Only</strong> security mode (or in other words AES cipher). 
bws.msg.WPA.2,좋은 무선 성능을 위해, <strong>WPA2 Only</strong>  보안 모드를 사용하시기 바랍니다. 
#From:haf.dmz.30,Packets received by the DMZ host have their IP addresses translated from the WAN-side IP address of the router to the LAN-side IP address of the DMZ host. However, port numbers are not translated; so applications on the DMZ host can depend on specific port numbers. 
haf.dmz.30,DMZ 호스트가 수신한 패킷들은 WAN 쪽 IP에서 LAN 쪽 IP로 전송됩니다. 다만 포트 번호 전송되지 않습니다. 따라서 DMZ 호스트의 응용프로그램들은 특정 포트 번호에 따라 변경됩니다.
#From:sps.fp,The following <span id="status_text">printer is</span> attached to your router. 
sps.fp,<span id="status_text">printer is</span> 가 라우터에 연결되어 있습니다.
#From:wwa.msg.dhcp,Choose this if your Internet connection automatically provides you with an IP Address. Most Cable Modems use this type of connection. 
wwa.msg.dhcp,현재 사용중인 인터넷 연결이 자동으로 IP 주소를 제공한다면 이것을 선택하시기 바랍니다. 대부분의 케이블 모뎀은 이와 같은 종류의 연결을 사용하고 있습니다.
#From:gw.gm.57,Unreal Tournament 2004 
gw.gm.57,Unreal Tournament 2004 
#From:aa.wiz.s1.msg1,Step 1 - Choose a unique name for your policy 
aa.wiz.s1.msg1,Step 1-  고유한 정책 이름을 선택하십시오. 
#From:GW_LAN_IP_ADDRESS_INVALID,LAN IP address is invalid. 
GW_LAN_IP_ADDRESS_INVALID,LAN IP 주소가 잘못되었습니다. 
#From:KR5,Remote IP Start 
KR5,원격  시작 IP 주소
#From:help625,NetBIOS 
help625,NetBIOS 
#From:help88c,The QoS Engine supports overlaps between rules, where more than one rule can match for a specific message flow. If more than one rule is found to match the rule with the highest priority will be used. 
help88c,The QoS Engine supports overlaps between rules, where more than one rule can match for a specific message flow. If more than one rule is found to match the rule with the highest priority will be used. 
#From:GW_INET_ACL_SCHEDULE_NAME_INVALID,Schedule name %s is not defined. 
GW_INET_ACL_SCHEDULE_NAME_INVALID,스케쥴 이름 %s 이 정의되지 않았습니다.
#From:help680,Server 
help680,Server 
#From:MUST_BE_LOGGED_IN_AS_ADMIN,You must be logged in as 'admin' to perform this action 
MUST_BE_LOGGED_IN_AS_ADMIN,반드시 '관리자'으로 로그인 하시기 바랍니다. 
#From:up.tz.64,(GMT+09:30) Darwin 
up.tz.64,(GMT+09:30) Darwin 
#From:IPWOLALG_REJECTED_PACKET,Wake-on-LAN ALG rejected packet from %v:%u to %v:%u 
IPWOLALG_REJECTED_PACKET,Wake-on-LAN ALG가 %v:%u에서 %v:%u로의 패킷을 거부하였습니다. 
#From:WCN_LOG_UPDATE,Update device to wsetting.wfc 
WCN_LOG_UPDATE,wsetting.wfc 로 장비 업데이트  
#From:help167,Specify the LAN IP address of the LAN computer that you want to have unrestricted Internet communication. If this computer obtains its address Automatically using DHCP, then you may want to make a static reservation on the <a href="../Basic/Network.shtml">Setup &rarr; Network&nbsp;Settings</a> page so that the IP address of the DMZ computer does not change. 
help167,Specify the LAN IP address of the LAN computer that you want to have unrestricted Internet communication. If this computer obtains its address Automatically using DHCP, then you may want to make a static reservation on the <a href="../Basic/Network.shtml">Setup &rarr; NetworkSettings</a> page so that the IP address of the DMZ computer does not change. 
#From:at.DxDSL,Detected xDSL or Other Frame Relay Network 
at.DxDSL,검색된 xDSL 또는 프레임 릴레이 네트워크
#From:help568,In terms of a wireless network, this is when wireless clients use an Access Point to gain access to the network 
help568,In terms of a wireless network, this is when wireless clients use an Access Point to gain access to the network 
#From:help80,This option should be enabled when you have a slow Internet uplink. It helps to reduce the impact that large low priority network packets can have on more urgent ones by breaking the large packets into several smaller packets. 
help80,This option should be enabled when you have a slow Internet uplink. It helps to reduce the impact that large low priority network packets can have on more urgent ones by breaking the large packets into several smaller packets. 
#From:wprn.bados2,The Printer Setup Wizard supports only Windows XP/2000/98/ME operating systems. Your computer uses the <span id="wz_page_1_err_1_os">&nbsp;</span> operating system. 
wprn.bados2,프린터 설치 마법사는 Windows XP/2000/98/ME 환경에서 정상 동작 합니다. 현재 사용중인 컴퓨터는 <span id="wz_page_1_err_1_os">&nbsp;</span> 시스템 환경 입니다.
#From:GW_QOS_RULES_REMOTE_PORT,'%s': Remote port start, %u, must be less than remote port end, %u 
GW_QOS_RULES_REMOTE_PORT,%s': 원격 포트 시작 %u은 원겨지 마지막 포트 %u보다 작아야 합니다. 
#From:help171,Here you can add entries to the Inbound Filter Rules List below, or edit existing entries. 
help171,Here you can add entries to the Inbound Filter Rules List below, or edit existing entries. 
#From:.Mon,Mon 
.Mon,Mon 
#From:up.tz.66,(GMT+10:00) Canberra, Melbourne, Sydney 
up.tz.66,(GMT+10:00) Canberra, Melbourne, Sydney 
#From:help369,128-bit hexadecimal keys are exactly 26 characters in length. (456FBCDF123400122225271730 is a valid string of 26 characters for 128-bit encryption.) 
help369,128-bit hexadecimal keys are exactly 26 characters in length. (456FBCDF123400122225271730 is a valid string of 26 characters for 128-bit encryption.) 
#From:help48a,Instead of entering a name for the Special Application rule, you can select from this list of common applications, and the remaining configuration values will be filled in accordingly. 
help48a,Instead of entering a name for the Special Application rule, you can select from this list of common applications, and the remaining configuration values will be filled in accordingly. 
#From:LW38,Wireless Settings 
LW38,무선 설정  
#From:GW_DYNDNS_USER_NAME_INVALID,user account must be specified 
GW_DYNDNS_USER_NAME_INVALID,사용자 계정을 반드시 지정하십시오. 
#From:wwl.title.s4.2,Step 2: Set your Wireless Security Password 
wwl.title.s4.2,Step 2: 무선 보안 패스워드 설정
#From:help620,Multicast 
help620,Multicast 
#From:wprn.s3a,The setup executable you have just launched will display a progress bar and notify you when setup is complete. When done, click <em>Finish</em> below to close the Printer Setup wizard. 
wprn.s3a,현재 실행시킨 설정마법사는 실행 상태를 바를 통해 보여주며 실행완료 후 알려드립니다. 설치 완료후에는 프린트 설치 마법사를 완료하기 위해 <em>Finish</em>를 누르시기 바랍니다. 
#From:help196,If you don't use the All Day option, then you enter the time here. The start time is entered in two fields. The first box is for the hour and the second box is for the minute. Email events are normally triggered only by the start time. 
help196,If you don't use the All Day option, then you enter the time here. The start time is entered in two fields. The first box is for the hour and the second box is for the minute. Email events are normally triggered only by the start time. 
#From:PPPOE_EVENT_DISCOVERY_REQUEST_ERROR,PPPoE session offer had errors. Connection attempt failed. 
PPPOE_EVENT_DISCOVERY_REQUEST_ERROR,PPPoE 세션에 에러가 발생하였습니다. 연결 시도가 실패하였습니다. 
#From:help667,Apple's version of UPnP, which allows for devices on a network to discover each other and be connected without the need to configure any settings 
help667,Apple's version of UPnP, which allows for devices on a network to discover each other and be connected without the need to configure any settings 
#From:hhav.r_dest_ip,The destination IP address is the address of the host or network you wish to reach. 
hhav.r_dest_ip,목적지 IP 주소는 도달하고 싶은 호스트 또는 네트워크의 IP 주소입니다. 
#From:YM175,The remote admin port number is not valid. 
YM175,원격지 관리 포트 번호가 잘못되었습니다. 
#From:help766,A family of specifications for wireless local area networks (WLANs) developed by a working group of the Institute of Electrical and Electronics Engineers (IEEE). 
help766,A family of specifications for wireless local area networks (WLANs) developed by a working group of the Institute of Electrical and Electronics Engineers (IEEE). 
#From:wprn.tt10,If the setup executable did not launch automatically after downloading to your computer, you may need to open the file-download folder using a file browser and double-click on the icon labeled <em>Printer_Setup.exe.</em> 
wprn.tt10,PC에 다운로드 한 후 실행 파일이 자동으로 시작되지 않으면, 파일 브라우저를 사용하여 <em>Printer_Setup.exe.</em> 파일을 두 번 클릭 후 폴더를 직접 실행하십시오.
#From:LY3,Wi-Fi Protected Setup is used to easily add devices to a network using a PIN or button press. Devices must support Wi-Fi Protected Setup in order to be configured by this method. 
LY3,Wi-Fi Protected 설정을 사용하여 PIN 또는 버튼을 눌러 쉽게 장비를 네트워크에 추가할 수 있습니다. 이 방법으로 설정하기 위해서 장비들이 반드시 Wi-Fi Protected 설정을 지원해야 합니다.
#From:li.Log_In,Log In 
li.Log_In,로그인
#From:.defgw,Default Gateway 
.defgw,디폴트 게이트웨이
#From:af.gss,Non-UDP/TCP/ICMP LAN Sessions 
af.gss,비 UDP/TCP/ICMP LAN 세션 
#From:GW_UPNP_IGD_PORTMAP_ADD,UPnP added entry %v <-> %v:%d <-> %v:%d %s timeout:%d '%s' 
GW_UPNP_IGD_PORTMAP_ADD,UPnP %v <-> %v:%d <-> %v:%d %s 타임아웃:%d '%s' 엔트리를 추가하였습니다. 
#From:tt.NTPSrvU,NTP Server Used 
tt.NTPSrvU,NTP 서버 사용
#From:GW_UPNP_IGD_PORTMAP_CONFLICT,UPnP conflict with existing entry %v <-> %v:%d <-> %v:%d %s '%s' 
GW_UPNP_IGD_PORTMAP_CONFLICT,현재 있는 UPnP 엔트리 %v <-> %v:%d <-> %v:%d %s '%s' 와 충돌됩니다. 
#From:help8,Enter the Public Port as [8888] 
help8,Enter the Public Port as [8888] 
#From:help258,Your ISP provides you with all of this information. 
help258,Your ISP provides you with all of this information. 
#From:PPPOE_EVENT_TERMINATED,PPPoE session 0x%04X terminated by access concentrator 
PPPOE_EVENT_TERMINATED,PPPoE 세션 0x%04X 이 액세스 콘센트레이트에 의해  종료되었습니다. 
#From:up.rb.1,Are you sure you want to reboot the device? 
up.rb.1,장비를 정말로 다시 시작하시겠습니까? 
#From:help25.b,Use the checkboxes at the left to activate or deactivate completed Virtual Server entries. 
help25.b,Use the checkboxes at the left to activate or deactivate completed Virtual Server entries. 
#From:sl.saveLog,Save Log 
sl.saveLog,로그 저장
#From:sl.intro,Use this option to view the router logs. You can define what types of events you want to view and the event levels to view. This router also has internal syslog server support so you can send the log files to a computer on your network that is running a syslog utility. 
sl.intro,공유기 로그를 확인하기 위해서 이 옵션을 사용하십시오. 확인하고 싶은 이벤트 종류와 레벨을 정의할 수 있습니다. 공유기에서 내부 시스템 로그 서버를 설정하여 로그 파일을 시스템 로그 유틸리티가 운영되는 PC로 전송할 수 있습니다.
#From:.aa.wiz.s4.help,Specify a machine with its IP or MAC address, or select "Other Machines" for machines that do not have a policy. 
.aa.wiz.s4.help,IP 주소 또는 MAC 주소가 있는 장치를 지정하거나, 정책이 없는 장비는 "다른 장비"에서 선택하십시오. 
#From:GW_WAN_CARRIER_LOST,WAN interface cable has been disconnected 
GW_WAN_CARRIER_LOST,WAN 인터페이스의 연결이 끊어졌습니다. 
#From:bwn.bytes,(bytes) 
bwn.bytes,(bytes) 
#From:.vs.port,Port 
.vs.port,포트
#From:help779,BigPond Connection 
help779,BigPond Connection 
#From:.macaddr,MAC Address 
.macaddr,MAC 주소
#From:help823.13,Reset or closed TCP connections. The connection does not close instantly so that lingering packets can pass or the connection can be re-established. 
help823.13,Reset or closed TCP connections. The connection does not close instantly so that lingering packets can pass or the connection can be re-established. 
#From:GW_INET_ACL_RECONFIGURED_WARNING,<warn>Access Control Table is being reconfigured because the LAN subnet has been changed.</warn> 
GW_INET_ACL_RECONFIGURED_WARNING,<warn>LAN 서브넷이 변경되어 액세스 콘트롤 테이블을 다시 설정합니다.</warn>
#From:anet.multicast.enable,Enable Multicast Streams 
anet.multicast.enable,멀티캐스트 스트림 설정 
#From:GW_DYNDNS_UPDATE_NEXT,Next dynamic DNS update scheduled for %s 
GW_DYNDNS_UPDATE_NEXT,다음 DDNS 업데이트 스케쥴 %s
#From:help866,Enter the password associated with the account. 
help866,Enter the password associated with the account. 
#From:sl.RStat,Router Status 
sl.RStat,공유기 상태
#From:help662,RADIUS 
help662,RADIUS 
#From:gw.gm.78,Roger Wilco 
gw.gm.78,Roger Wilco 
#From:help80b,Enables the router to recognize certain audio and video streams generated by a Windows Media Center PC and to prioritize these above other traffic. Such streams are used by systems known as Windows Media Extenders, such as the Xbox 360. 
help80b,Enables the router to recognize certain audio and video streams generated by a Windows Media Center PC and to prioritize these above other traffic. Such streams are used by systems known as Windows Media Extenders, such as the Xbox 360. 
#From:help90,Create a name for the rule that is meaningful to you. 
help90,Create a name for the rule that is meaningful to you. 
#From:PPTP_EVENT_TUNNEL_DOWN,PPTP tunnel ID 0x%04X has been closed 
PPTP_EVENT_TUNNEL_DOWN,PPTP 터널 ID 0x%04X 가 종료되었습니다. 
#From:YM145,For most applications, the priority classifiers ensure the right priorities and specific WISH Rules are not required. 
YM145,대부분의 응용프로그램에서 우선 순위 분류는 정확한 우선 순위와 상세한 WISH 규칙을 요구하지 않습니다.  
#From:bwn.SWM,Static WAN Mode 
bwn.SWM,정적 WAN 모드
#From:IPWEBFILTER_REJECTED_PACKET,Web filter rejected packet from %v:%u to %v:%u 
IPWEBFILTER_REJECTED_PACKET,웹필터가 %v:%u 에서 %v:%u 로의 패킷을 거부하였습니다. 
#From:GW_UPGRADE_FAILED,Invalid firmware upgrade image uploaded - discarding it 
GW_UPGRADE_FAILED,펌웨어 업그레이드 이미지 업로드가 잘못되었습니다.  - 취소합니다. 
#From:ag.intro,This option is used to open multiple ports or a range of ports in your router and redirect data through those ports to a single PC on your network. This feature allows you to enter ports in various formats including, Port Ranges (100-150), Individual Ports (80, 68, 888), or Mixed (1020-5000, 689). 
ag.intro,여러 개의 포트 또는 포트 범위를 열어서 이 포트들을 통해 데이터를 PC 한대로 전송할 수 있습니다.(redirection) 포트 범위 (100-150),  각각의 포트 번호 (80, 68, 888), 혼합 (1020-5000, 689) 모드와 같은 여러 가지 방식으로 포트를 입력하실 수 있습니다. 
#From:WIFISC_AP_UNSET_SELECTED_REGISTRAR,Unset Selected Registrar 
WIFISC_AP_UNSET_SELECTED_REGISTRAR,Unset Selected Registrar
#From:ta.intro.Adm,The Admin option is used to set a password for access to the Web-based management. By default there is no password configured. It is highly recommended that you create a password to keep your new router secure. 
ta.intro.Adm,웹 기반으로 공유기에 접속할 수 있도록 관리자용 비밀번호를 Admin 옵션에서 설정합니다. 디폴트로는 비밀번호가 설정되어 있지 않습니다.  공유기 보안을 위해 새로운 비밀번호를 생성하도록 권장합니다.
#From:bwn.L2TPSIPA,L2TP Server IP Address 
bwn.L2TPSIPA,L2TP 서버 IP 주소
#From:GW_INET_ACCESS_UNRESTRICTED,No Internet access policy is in effect. Unrestricted Internet access allowed to everyone 
GW_INET_ACCESS_UNRESTRICTED,동작 중인 인터넷 접속 정책이 없습니다. 모든 사용자들이 인터넷에 접속할 수 있습니다. 
#From:GW_WAN_DNS_SERVER_SECONDARY_WITHOUT_PRIMARY_INVALID,Secondary DNS cannot be specified without giving a primary also. 
GW_WAN_DNS_SERVER_SECONDARY_WITHOUT_PRIMARY_INVALID,1차 DNS를 지정하지 않으면 2차 DNS 또한 지정할 수 없습니다. 
#From:GW_NAT_TRIGGER_PORT,Trigger Port 
GW_NAT_TRIGGER_PORT,트리거 포트
#From:YM72,WISH (Wireless Intelligent Stream Handling) prioritizes the traffic of various wireless applications. 
YM72,WISH (Wireless Intelligent Stream Handling) 는 다양한 무선 응용프로그램의 트래픽에 우선순위를 부여합니다. 
#From:up.tz.11,(GMT-05:00) Bogota, Lima, Quito 
up.tz.11,(GMT-05:00) Bogota, Lima, Quito 
#From:.hints,Helpful Hints 
.hints,유용한 도움말
#From:.disabled,Disabled 
.disabled,설정 안 함
#From:GW_LOG_EMAIL_ON_LOG_FULL,Sending log email as log is full 
GW_LOG_EMAIL_ON_LOG_FULL,로그가 가득차서 이메일을 전송합니다. 
#From:tt.time.8,7 am 
tt.time.8,7 am 
#From:ddns.connecting,Connecting 
ddns.connecting,연결
#From:help43,Allows Windows Media Player, using MMS protocol, to receive streaming media from the internet. 
help43,Allows Windows Media Player, using MMS protocol, to receive streaming media from the internet. 
#From:GW_QOS_RULES_LOCAL_PORT,'%s': Local port start, %u, must be less than local port end, %u 
GW_QOS_RULES_LOCAL_PORT,%s': 로컬 시작 포트 %u, 는 로컬 마지막 포트 %u 보다 적습니다. 
#From:help701,Stateful inspection 
help701,Stateful inspection 
#From:help282,Typically PPTP connections are not always on. The D-Link router allows you to set the reconnection mode. The settings are: 
help282,Typically PPTP connections are not always on. The D-Link router allows you to set the reconnection mode. The settings are: 
#From:aa.EAC,Enable Access Control 
aa.EAC,접근제어
#From:YM52,Invalid local start IP Address. 
YM52,로컬 시작 IP 주소가 잘못되었습니다. 
#From:te.OnFull,On Log Full 
te.OnFull,On Log Full 
#From:tt.Apr,Apr 
tt.Apr,Apr 
#From:.aa.bsecure.chat,Chat 
.aa.bsecure.chat,Chat 
#From:tt.alert.invlddt,Invalid Date or Time 
tt.alert.invlddt,날짜 또는 시간이 잘못되었습니다. 
#From:help542,Half-duplex 
help542,Half-duplex 
#From:help104,Destination IP: 
help104,Destination IP: 
#From:help839,Note that, in Microsoft's current implementation of WCN, you cannot save the wireless settings if a profile of the same name already exists. To work around this limitation, either delete the existing profile or change the SSID when you change the wireless settings; then, when you save the new settings, a new profile will be created. 
help839,마이크로 소프트의 WCN 에서 이미 있는 프로파일 이름과 같은 프로파일의 무선 설정을 저장할 수 없습니다. 이런 제한 사항을 해결하기 위해서, 무선 설정을 변경할 때, 현재의 프로파일을 삭제하거나 SSID를 변경하십시오. 그리고 나서 새로운 설정을 저장하면 새로운 프로파일이 생성됩니다. 
#From:bwl.MS,(Mbit/s) 
bwl.MS,(Mbit/s) 
#From:YM99,Invalid WAN IP address 
YM99,잘못된 WAN IP 주소
#From:wwa.intro.wel,This wizard will guide you through a step-by-step process to configure your new D-Link router and connect to the Internet. 
wwa.intro.wel,마법사를 사용하시면 공유기를 인터넷에 쉽게 연결할 수 있습니다. 
#From:help570,A system of worldwide networks which use TCP/IP to allow for resources to be accessed from computers around the world 
help570,A system of worldwide networks which use TCP/IP to allow for resources to be accessed from computers around the world 
#From:.aa.bsecure.byage,By Age 
.aa.bsecure.byage,연령별
#From:help489,DMZ: A single computer or group of computers that can be accessed by both users on the Internet as well as users on the Local Network, but that is not protected by the same security as the Local Network. 
help489,DMZ: A single computer or group of computers that can be accessed by both users on the Internet as well as users on the Local Network, but that is not protected by the same security as the Local Network. 
#From:tool.admin.portconflict,Remote Admin Port conflict with 
tool.admin.portconflict,원격지 관리 포트가 충돌됩니다. 
#From:gw.SelVS,Application Name 
gw.SelVS,응용프로그램 이름
#From:help723,To install a more recent version of a software or firmware product 
help723,To install a more recent version of a software or firmware product 
#From:bwn.RM.0,Always on 
bwn.RM.0,항상
#From:hhai.edit,Click the <strong>Edit</strong> icon in the Rules List to change a rule. 
hhai.edit,<strong>Edit</strong> 버튼을 눌러 규칙 리스트를 수정하십시오. 
#From:te.FromEm,From Email Address 
te.FromEm,보내는 메일(SMTP)
#From:NET_RTC_REQUEST_TIME,Requesting time from %v 
NET_RTC_REQUEST_TIME,%v 로부터의 요청 시간 
#From:help824,Enter a password for the user "admin", who will have full access to the Web-based management interface. 
help824,Enter a password for the user "admin", who will have full access to the Web-based management interface. 
#From:GW_INET_ACL_NAME_DUPLICATE_INVALID,Name '%s' already exists. 
GW_INET_ACL_NAME_DUPLICATE_INVALID,이름 '%s' 이 이미 있습니다. 
#From:N_A,N/A 
N_A,N/A 
#From:help279,PPTP Subnet Mask 
help279,PPTP Subnet Mask
#From:help593,Kilobyte 
help593,Kilobyte 
#From:help447,A time during processes when something causes the process to slowdown or stop all together 
help447,A time during processes when something causes the process to slowdown or stop all together 
#From:GW_DHCP_SERVER_POOL_TO_INVALID,The DHCP server end address %v is not valid in the LAN subnet %v. 
GW_DHCP_SERVER_POOL_TO_INVALID,LAN 서브넷 %v 에 있는 DHCP 서버 마지막 주소 %v 가 유효하지 않습니다. 
#From:bwl.VS.1,Invisible 
bwl.VS.1,사용 
#From:gw.gm.48,Soldier of Fortune II: Double Helix 
gw.gm.48,Soldier of Fortune II: Double Helix 
#From:KR26,In progress 
KR26,진행중
#From:YM92,Do you want to enable the DHCP Reservation entry for IP Address 
YM92,DHCP Reservation IP 엔트리를 설정하시겠습니까?
#From:GW_DHCP_SERVER_RESERVED_IP_INVALID,Reserved IP %v is invalid 
GW_DHCP_SERVER_RESERVED_IP_INVALID,DHCP 보유 IP %v 가 잘못되었습니다. 
#From:help882,Confirm updated firmware revision on status page. 
help882,Confirm updated firmware revision on status page. 
#From:up.tz.41,(GMT+03:00) Tehran 
up.tz.41,(GMT+03:00) Tehran 
#From:RUNTIME_CONFIG_LOADED_CONFIG_FROM_NVRAM,Loaded configuration from non-volatile memory 
RUNTIME_CONFIG_LOADED_CONFIG_FROM_NVRAM,NVRAM 에서 설정 파일 불러오기 
#From:help19x1,The common choices -- UDP, TCP, and both UDP and TCP -- can be selected from the drop-down menu. 
help19x1,The common choices -- UDP, TCP, and both UDP and TCP -- can be selected from the drop-down menu. 
#From:.aa.bsecure.unstable,Unstable 
.aa.bsecure.unstable,불안정함
#From:li.alert.1,Session timeout, please try again. 
li.alert.1,세션이 종료되었습니다. 다시 시작하십시오. 
#From:GW_DHCP_SERVER_RESERVED_IP_IN_POOL_INVALID,Reserved IP address %v should be within the configured DHCP range. 
GW_DHCP_SERVER_RESERVED_IP_IN_POOL_INVALID,보유 IP 주소 %v 는 설정되어 있는 DHCP 범위 내에 있어야 합니다. 
#From:help307,The IP address of your router on the local area network. Your local area network settings are based on the address assigned here. For example, 192.168.0.1. 
help307,The IP address of your router on the local area network. Your local area network settings are based on the address assigned here. For example, 192.168.0.1. 
#From:help705,System Logger -- a distributed logging interface for collecting in one place the logs from different sources. Originally written for UNIX, it is now available for other operating systems, including Windows. 
help705,System Logger -- a distributed logging interface for collecting in one place the logs from different sources. Originally written for UNIX, it is now available for other operating systems, including Windows. 
#From:help755,Connecting to a Local Area Network over one of the 802.11 wireless standards 
help755,Connecting to a Local Area Network over one of the 802.11 wireless standards 
#From:help273,A connection to the Internet is made as needed. 
help273,A connection to the Internet is made as needed. 
#From:gw.gm.81,PlayStation2 
gw.gm.81,PlayStation2 
#From:up.rb.4,Are you sure you want to reset the device to its factory default settings? 
up.rb.4,장비를 공장 초기 설정으로 리셋하시겠습니까? 
#From:GW_FIREWALL_FILTER_NAME_INVALID,Filter Rule '%s' can't be deleted or renamed because it is used. 
GW_FIREWALL_FILTER_NAME_INVALID,사용중이므로 필터 규칙 '%s'를 삭제하거나 이름을 변경할 수 없습니다. 
#From:ZM19,You might need this file so that you can load your configuration later in the event that the router's default settings are restored. 
ZM19,공유기를 기본 설정으로 복구할 경우 이 파일을 사용하십시오. 
#From:bwn.PPTPICT,PPTP Internet Connection Type 
bwn.PPTPICT,PPTP 인터넷 연결 유형
#From:YM80,Video (VI) 
YM80,Video (VI) 
#From:bd.NETBIOS_WINS.2,Secondary WINS Server IP address 
bd.NETBIOS_WINS.2,2차 WINS 서버 IP 주소 
#From:GW_UPGRADE_SUCCEEDED,Firmware upgrade image successfully uploaded - installing 
GW_UPGRADE_SUCCEEDED,펌웨어 업그레이드 이미지 업로드가 성공하였습니다. - 설치중 
#From:.H323,H.323 
.H323,H.323 
#From:help96,The rule applies to a flow of messages whose WAN-side port number is within the range set here. 
help96,The rule applies to a flow of messages whose WAN-side port number is within the range set here. 
#From:bwl.AS,(Also called the SSID) 
bwl.AS,(SSID로 불림)
#From:.wchannel,Wireless Channel 
.wchannel,무선 채널
#From:wwz.manual.key,Manually assign a network key 
wwz.manual.key,네트워크 키를 직접 할당하십시오. 
#From:wps.p3.5,please press the push button on your wireless device and click the below 'Connect' Button within 120 seconds 
wps.p3.5,무선 장비에 push 버튼을 누른 후,  120초 안에 아래의 '연결' 버튼을 누르십시오.  
#From:tps.enlpd,Enable LPD/LPR Printing 
tps.enlpd,LPD/LPR 프린팅 설정
#From:help427,To provide credentials, like a Password, in order to verify that the person or device is really who they are claiming to be 
help427,To provide credentials, like a Password, in order to verify that the person or device is really who they are claiming to be 
#From:.L2TP,L2TP 
.L2TP,L2TP 
#From:KR57,Re-initializes the Add/Update area of the screen, erasing any changes that you may have made prior to clicking the Add/Update button. 
KR57,추가/업데이트 스크린을 초기화하여 추가/업데이트를 누르기 전의 변경 되었을 수도 있는 설정을 삭제하십시오. 
#From:bd.DIPAR,DHCP IP Address Range 
bd.DIPAR,DHCP IP 주소 범위 
#From:.stats,Statistics 
.stats,상세 통계 정보 
#From:YM164,Active 
YM164,액티브
#From:wwl.s4.intro.za2,- Between 8 and 64 characters (A longer WPA key is more secure than a short one) 
wwl.s4.intro.za2,8 ~ 64 자(WPA 키 길이가 길수록 보안이 더 강화됩니다.)  
#From:IPL2TP_SESSION_DOWN,L2TP local session 0x%04X is down 
IPL2TP_SESSION_DOWN,L2TP 로컬 세션 0x%04X이  다운되었습니다. 
#From:help485,To unscramble an encrypted message back into plain text 
help485,To unscramble an encrypted message back into plain text 
#From:help338,Go to the Start menu, select Run, type in <code>winipcfg</code>, and hit Enter. A popup window will be displayed. Select the appropriate adapter from the pull-down menu and you will see the Adapter Address. This is the MAC address of the device. 
help338,Go to the Start menu, select Run, type in <code>winipcfg</code>, and hit Enter. A popup window will be displayed. Select the appropriate adapter from the pull-down menu and you will see the Adapter Address. This is the MAC address of the device. 
#From:bwn.DIAICT,Dynamic IP (DHCP) Internet Connection Type 
bwn.DIAICT,동적 IP(DHCP) 인터넷 연결 종류  
#From:.logsyslog.alert2,IP address is not allowed 
.logsyslog.alert2,IP 주소가 허용되지 않습니다. 
#From:help859,Enter the LAN IP address of the Syslog Server. 
help859,Enter the LAN IP address of the Syslog Server. 
#From:YM149,Best Effort. 
YM149,Best Effort. 
#From:help490,Dynamic Host Configuration Protocol: Used to automatically assign IP addresses from a predefined pool of addresses to computers or devices that request them 
help490,Dynamic Host Configuration Protocol: Used to automatically assign IP addresses from a predefined pool of addresses to computers or devices that request them 
#From:.add,Add 
.add,추가
#From:.acccon,Access Control 
.acccon,접속 제어
#From:tsc.pingt.msg4,Unable to resolve, check that the name is correct. 
tsc.pingt.msg4,DNS 이름을 확인할 수 없습니다. 이름이 정확하지 확인하십시오. 
#From:ddns.disconnect,Disconnect 
ddns.disconnect,연결이 끊겼습니다. 
#From:LT120,Invalid DHCP Server lease time 
LT120,잘못된 DHCP 서버 갱신(lease) 
#From:.verifypw,Verify Password 
.verifypw,비밀번호 확인 
#From:am.intro.2,Configure MAC Filtering 
am.intro.2,MAC 필터링 설정 
#From:KR48,Auto (WPA or WPA2) - Personal 
KR48,Auto (WPA or WPA2) - Personal
#From:.aa.pol.add,Add Policy 
.aa.pol.add,정책 추가
#From:help11,Click <span class="button_ref">Save</span> to add the settings to the Virtual Servers List 
help11,Click <span class="button_ref">Save</span> to add the settings to the Virtual Servers List 
#From:gw.gm.59,Warcraft II 
gw.gm.59,Warcraft II 
#From:GW_WAN_RECONNECT_INTERVAL_INVALID,Invalid Reconnect interval: %u (must be between 20 and 180) 
GW_WAN_RECONNECT_INTERVAL_INVALID,재 연결 주기가 잘못되었습니다. : %u(20 ~ 180) 
#From:YM139,Controls endpoint filtering for packets of the TCP protocol. 
YM139,TCP 프로토콜 패킷의 엔드포인트 필터링을 제어합니다. 
#From:help555,HTTP over SSL is used to encrypt and decrypt HTTP transmissions 
help555,HTTP over SSL is used to encrypt and decrypt HTTP transmissions 
#From:YM61,Remote start port should be between 0 and 65535 inclusive. 
YM61,원격지 시작 포트는 0 ~ 65535(포함) 입니다. 
#From:.system,System 
.system,시스템
#From:help261a,This option is normally turned off, and should remain off as long as the WAN-side DHCP server correctly provides an IP address to the router. However, if the router cannot obtain an IP address from the DHCP server, the DHCP server may be one that works better with unicast responses. In this case, turn the unicasting option on, and observe whether the router can obtain an IP address. In this mode, the router accepts unicast responses from the DHCP server instead of broadcast responses. 
help261a,This option is normally turned off, and should remain off as long as the WAN-side DHCP server correctly provides an IP address to the router. However, if the router cannot obtain an IP address from the DHCP server, the DHCP server may be one that works better with unicast responses. In this case, turn the unicasting option on, and observe whether the router can obtain an IP address. In this mode, the router accepts unicast responses from the DHCP server instead of broadcast responses. 
#From:KR111,Warnings were raised as a result of configuration changes. 
KR111,설정 변경으로 경고가 생성되었습니다. 
#From:GW_NAT_VIRTUAL_SERVER_TABLE_RECONFIGURED_WARNING,<warn>Virtual Server Table is being reconfigured because the LAN subnet has been changed.</warn> 
GW_NAT_VIRTUAL_SERVER_TABLE_RECONFIGURED_WARNING,<warn>LAN 서브넷이 변경되어 가상 서버 테이블이 재구성됩니다. </warn>
#From:hhtsc.pingt.intro,"Ping" checks whether a computer on the Internet is running and responding. 
hhtsc.pingt.intro,"Ping"으로 PC 가 동작하는지 응답하는 지등을 확인합니다. 
#From:up.tz.02,(GMT-10:00) Hawaii 
up.tz.02,(GMT-10:00) Hawaii 
#From:help5,Name the Virtual Server (for example: <code>Web Server</code>) 
help5,Name the Virtual Server (for example: <code>Web Server</code>) 
#From:YM1,Reboot needed 
YM1,리부팅이 필요합니다. 
#From:help767s,Support Menu 
help767s,Support Menu 
#From:bws.WKL,WEP Key Length 
bws.WKL,WEP Key 길이
#From:gw.gm.45,Splinter Cell: Pandora Tomorrow 
gw.gm.45,Splinter Cell: Pandora Tomorrow 
#From:wwa.wanmode.pppoe,Username / Password Connection (PPPoE) 
wwa.wanmode.pppoe,사용자명 / 비밀번호 연결 (PPPoE)
#From:LY5,PIN Settings 
LY5,PIN 설정
#From:KR102,Save Settings Succeeded 
KR102,설정을 성공적으로 저장하였습니다. 
#From:help462,Collision 
help462,Collision 
#From:GW_QOS_RULES_LOCAL_IP_START_SUBNET,'%s': Local IP start '%v' is not in the LAN subnet 
GW_QOS_RULES_LOCAL_IP_START_SUBNET,%s': 로컬 시작 IP '%v' 가 LAN 서브넷에 없습니다. 
#From:GW_WAN_PPTP_IP_ADDRESS_INVALID,Invalid PPTP IP address: %v 
GW_WAN_PPTP_IP_ADDRESS_INVALID,PPTP IP 주소: %v 가 잘못되었습니다. 
#From:.aa.bsecure.alcohol,Alcohol 
.aa.bsecure.alcohol,Alcohol 
#From:haf.dmz.60,A host needs to support several applications that might use overlapping ingress ports such that two port forwarding rules cannot be used because they would potentially be in conflict. 
haf.dmz.60,한 PC에서 몇 가지 응용프로그램을 사용하기 위해 수신 포트를 중첩해서 사용할 수도 있는데, 잠재적으로 충돌이 일어 날 수 있으므로 두 개의 포트 포워딩 규칙을 사용할 수 없습니다.
#From:YM14,Port Filter rule names cannot be duplicated. 
YM14,포트 필터 규칙 이름을 중복해서 사용할 수 없습니다. 
#From:GW_WLAN_11B_DYNAMIC_TURBO_INVALID,Dynamic Turbo mode is not allowed with 802.11b. 
GW_WLAN_11B_DYNAMIC_TURBO_INVALID,Dynamic Turbo mode는 802.11b 에서 사용되지 않습니다.  
#From:te.intro.Em,The Email feature can be used to send the system log files, router alert messages, and firmware update notification to your email address. 
te.intro.Em,이메일 기능으로 시스템 로그 파일, 공유기 경고 메시지, 펌웨어 업데이트 공지 등을 관리자 이메일 주소로 전송합니다. 
#From:help732,VPN: A secure tunnel over the Internet to connect remote offices or users to their company's network 
help732,VPN: A secure tunnel over the Internet to connect remote offices or users to their company's network 
#From:wwl.text.none,Select this option if you do not want to activate any security features 
wwl.text.none,보안 기능을 활성화 하지 않을 경우, 이 옵션을 선택하십시오. 
#From:help895,Enter the username or key provided by your service provider. If the Dynamic DNS provider supplies only a key, enter that key in all three fields. 
help895,Enter the username or key provided by your service provider. If the Dynamic DNS provider supplies only a key, enter that key in all three fields. 
#From:GW_UPNP_IGD_PORTMAP_EXPIRE,UPnP expired entry %v <-> %v:%d <-> %v%d %s '%s' 
GW_UPNP_IGD_PORTMAP_EXPIRE,UPnP 엔트리 %v <-> %v:%d <-> %v%d %s '%s' 가 만료되었습니다. 
#From:help269,Typically PPPoE connections are not always on. The D-Link router allows you to set the reconnection mode. The settings are: 
help269,Typically PPPoE connections are not always on. The D-Link router allows you to set the reconnection mode. The settings are: 
#From:bwn.IF,WAN Ping <a href="Inbound_Filter.shtml" onclick="return jump_if();">Inbound Filter</a> 
bwn.IF,WAN Ping <a href="Inbound_Filter.shtml" onclick="return jump_if();">Inbound Filter</a>
#From:help592,Kbyte 
help592,Kbyte 
#From:1044a,Note, however, if the AP's settings specify "DHCP (Dynamic)" Address, and the router's DHCP server assigns a domain name to the AP, that domain name will override any name you enter here. 
1044a,AP를 "DHCP(동적)" 주소로 설정한 경우, 공유기의 DHCP 서버가 AP에 도메인 이름을 할당하고 그 도메인 이름은 여기에 입력한 모든 이름보다 우선합니다. 
#From:GW_WAN_RECONNECT_ON_ACTIVE,Attempting to re-connect on-demand WAN connection 
GW_WAN_RECONNECT_ON_ACTIVE,on-demand WAN 연결을 다시 하도록 시도 
#From:wprn.tt6,Attempt to fix the problem with the printer, then click <em>Refresh</em> to update printer status. 
wprn.tt6,프린터 문제를 해결하려면 <em>Refresh</em> 눌러 프린터 상태를 업데이트하십시오. 
#From:help455,A device that allows you to connect a computer up to a coaxial cable and receive Internet access from your Cable provider 
help455,A device that allows you to connect a computer up to a coaxial cable and receive Internet access from your Cable provider 
#From:aa.Machine,Machine 
aa.Machine,장비
#From:help685,The fifth layer of the OSI model which coordinates the connection and communication between applications on both ends 
help685,The fifth layer of the OSI model which coordinates the connection and communication between applications on both ends 
#From:.Wed,Wed 
.Wed,Wed 
#From:help107,One bits in the mask specify which bits of the IP address must match. 
help107,One bits in the mask specify which bits of the IP address must match. 
#From:aw.erpe.h2,This option is available only when <span class="option">802.11 Mode</span> is set to <span class="option">802.11ng only</span>. 
aw.erpe.h2,이 옵션은 <span class="option">802.11 Mode</span> 를  <span class="option">802.11ng only</span> 로 설정한 경우에만 사용할 수 있습니다. 
#From:YM21,Invalid Destination Port Start for Port Filter 
YM21,잘못된 포터 필터의 목적지 시작 포트 
#From:tt.time.20,7 pm 
tt.time.20,7 pm 
#From:aa.FPR.c3,Dest IP<br />Start 
aa.FPR.c3,Dest IP<br />Start
#From:help68,Enter the TCP ports to open (for example <code>6159-6180, 99</code>). 
help68,Enter the TCP ports to open (for example <code>6159-6180, 99</code>). 
#From:te.Acct,Account Name 
te.Acct,계정
#From:help150,It is most useful to prevent unauthorized wireless devices from connecting to your network. 
help150,It is most useful to prevent unauthorized wireless devices from connecting to your network. 
#From:YM147,The priority of the message flow is entered here. Four priorities are defined: 
YM147,메시지 흐름의 우선순위를 여기에 입력하십시오. 네가지 우선순위가 지정됩니다: 
#From:help146,Many web sites construct pages with images and content from other web sites. Access will be forbidden if you do not enable all the web sites used to construct a page. For example, to access <code>my.yahoo.com</code>, you need to enable access to <code>yahoo.com</code>, <code>yimg.com</code>, and <code>doubleclick.net</code>. 
help146,Many web sites construct pages with images and content from other web sites. Access will be forbidden if you do not enable all the web sites used to construct a page. For example, to access <code>my.yahoo.com</code>, you need to enable access to <code>yahoo.com</code>, <code>yimg.com</code>, and <code>doubleclick.net</code>. 
#From:IPSMTPCLIENT_MSG_SENT,SMTP client succeeded sending email 
IPSMTPCLIENT_MSG_SENT,SMTP 클라이언트가 성공적으로 이메일을 전송하였습니다. 
#From:gw.gm.38,Quake 3 
gw.gm.38,Quake 3 
#From:LW61,This Wizard helps you add wireless devices to the wireless network. 
LW61,마법사를 사용하여 무선 네트워크에 무선 장비를 추가하실 수 있습니다. 
#From:tt.time.2,1 am 
tt.time.2,1 am 
#From:help384,This option works with a RADIUS Server to authenticate wireless clients. Wireless clients should have established the necessary credentials before attempting to authenticate to the Server through this Gateway. Furthermore, it may be necessary to configure the RADIUS Server to allow this Gateway to authenticate users. 
help384,This option works with a RADIUS Server to authenticate wireless clients. Wireless clients should have established the necessary credentials before attempting to authenticate to the Server through this Gateway. Furthermore, it may be necessary to configure the RADIUS Server to allow this Gateway to authenticate users. 
#From:GW_WAN_L2TP_USERNAME_INVALID,A L2TP user name MUST be specified 
GW_WAN_L2TP_USERNAME_INVALID,L2TP 서버 이름을 반드시 명시해 주십시오. 
#From:LT120z,Invalid Secondary WINS IP 
LT120z,잘못된 2차 WINS IP 
#From:at.AUS,Automatic Uplink Speed 
at.AUS,자동 업링크 속도
#From:hhts.del,Click the <strong>Delete</strong> icon to permanently delete a schedule. 
hhts.del,<strong>Delete</strong> 버튼을 눌러 스케쥴을 완전히 삭제하십시오. 
#From:help818,The preference given to outbound packets of this conversation by the QoS Engine logic. Smaller numbers represent higher priority. 
help818,The preference given to outbound packets of this conversation by the QoS Engine logic. Smaller numbers represent higher priority. 
#From:KR97,WPA/WPA2 
KR97,WPA/WPA2 
#From:GW_WAN_L2TP_SUBNET_INVALID,Invalid L2TP subnet mask %v 
GW_WAN_L2TP_SUBNET_INVALID,잘못된 L2TP 서브넷 마스크 %v 
#From:help.ts.ss,Save Settings To Local Hard Drive 
help.ts.ss,로컬 하드 드라이버에 설정 저장 
#From:.aa.bsecure.automobile,Automobile 
.aa.bsecure.automobile,Automobile 
#From:help886,Firmware upgrade cannot be performed from a wireless device. To perform an upgrade, ensure that you are using a PC that is connected to the router by wire. 
help886,Firmware upgrade cannot be performed from a wireless device. To perform an upgrade, ensure that you are using a PC that is connected to the router by wire. 
#From:help655,Point-to-Point Protocol is used for two computers to communicate with each over a serial interface, like a phone line 
help655,Point-to-Point Protocol is used for two computers to communicate with each over a serial interface, like a phone line 
#From:help439,A data frame by which one of the stations in a Wi-Fi network periodically broadcasts network control data to other wireless stations. 
help439,A data frame by which one of the stations in a Wi-Fi network periodically broadcasts network control data to other wireless stations. 
#From:LW13,Add Wireless Device with WPS 
LW13,WPS 무선 장비 추가 
#From:sch.time,Time Frame 
sch.time,시간 대역 
#From:bws.intro.WlsSec,To protect your privacy you can configure wireless security features. This device supports three wireless security modes, including WEP, WPA-Personal, and WPA-Enterprise. WEP is the original wireless encryption standard. WPA provides a higher level of security. WPA-Personal does not require an authentication server. The WPA-Enterprise option requires an external RADIUS server. 
bws.intro.WlsSec,무선 보안의 세가지 무선 모드(WEP, WPA-Personal, WPA-Enterprise)를 지원합니다. WEP는 초기의 무선 암호화 표준이고, WPA는 WEP 보다 더 강력한 암호화를 지원합니다. WPA-Personal은 인증 서버가 필요 없지만, WPA-Enterprise는 외장 RADIUS 서버를 꼭 필요 합니다. 
#From:.aa.wiz.s2.msg,Choose a unique name for your policy. 
.aa.wiz.s2.msg,구분할 수 있는 정책 이름을 선택하십시오. 
#From:help52,Select the protocol used by the Internet traffic coming back into the router through the opened port range (for example <code>Both</code>). 
help52,Select the protocol used by the Internet traffic coming back into the router through the opened port range (for example <code>Both</code>). 
#From:wps.KR46,seconds ... 
wps.KR46,초 …
#From:wwz.wwl.intro.s3.1,Give your network a name, using up to 32 characters. 
wwz.wwl.intro.s3.1,최대 32자까지 네트워크 이름을 부여하십시오. 
#From:GW_WAN_PPPOE_PASSWORD_INVALID,A PPPoE password MUST be specified 
GW_WAN_PPPOE_PASSWORD_INVALID,PPPoE 비밀번호를 반드시 지정하십시오. 
#From:help211,Before you can use the router's WCN Wizard, you must first execute the Wireless Network Setup Wizard on your PC. If you have not already done so, go to the Windows Control Panel and select Wireless Network Setup Wizard. When the Wireless Network Setup Wizard gives you the choice to "Use a USB flash drive" or "Set up a network manually", choose the latter. (In fact, you will not have to do the set-up manually; it will be done with the WCN ActiveX Control.) 
help211,Before you can use the router's WCN Wizard, you must first execute the Wireless Network Setup Wizard on your PC. If you have not already done so, go to the Windows Control Panel and select Wireless Network Setup Wizard. When the Wireless Network Setup Wizard gives you the choice to "Use a USB flash drive" or "Set up a network manually", choose the latter. (In fact, you will not have to do the set-up manually; it will be done with the WCN ActiveX Control.) 
#From:td.intro.DDNS,The DDNS feature allows you to host a server (Web, FTP, Game Server, etc...) using a domain name that you have purchased (www.whateveryournameis.com) with your dynamically assigned IP address. Most broadband Internet Service Providers assign dynamic (changing) IP addresses. Using a DDNS service provider, your friends can enter your host name to connect to your game server no matter what your IP address is. 
td.intro.DDNS,DDNS 기능으로 구매한 도메인 이름(www.whateveryournameis.com)을 사용하여 유동 IP 주소로 서버(WEB, FTP, 게임서버 등) 호스팅이 가능합니다. 대부분의 인터넷 서비스 공급업체(ISP)는 유동 IP 주소를 사용합니다. DDNS 서비스 공급업체를 사용하여, 실제 서버가 가지고 있는 IP 주소와 상관 없이 등록한 호스트 이름을 입력하여 내부 서버에 접속할 수 있습니다.
#From:gw.gm.19,Ghost Recon 
gw.gm.19,Ghost Recon 
#From:up.tz.53,(GMT+07:00) Bangkok, Hanoi, Jakarta 
up.tz.53,(GMT+07:00) Bangkok, Hanoi, Jakarta 
#From:help845,DST Start and DST End 
help845,DST Start and DST End 
#From:help416,Used to transmit and receive RF signals. 
help416,Used to transmit and receive RF signals. 
#From:LS202,Invalid Subnet Mask 
LS202,서브넷 마스크가 잘못되었습니다. 
#From:up.tz.51,(GMT+06:00) Sri Jayawardenepura 
up.tz.51,(GMT+06:00) Sri Jayawardenepura 
#From:help72,Select a schedule for the times when this rule is in effect. If you do not see the schedule you need in the list of schedules, go to the <a href="../Tools/Schedules.shtml"> Tools&nbsp;&rarr;&nbsp;Schedules</a> screen and create a new schedule. 
help72,Select a schedule for the times when this rule is in effect. If you do not see the schedule you need in the list of schedules, go to the <a href="../Tools/Schedules.shtml"> Tools&rarr;Schedules</a> screen and create a new schedule. 
#From:tsc.end_time,End Time 
tsc.end_time,종료 시간 
#From:wprn.s3d,Alternatively, you can direct the setup executable to a folder on your computer containing a printer driver you have downloaded from the printer manufacturer's web site. 
wprn.s3d,대체방법으로, 프린터 제조업체 웹사이트에서 다운로드 받은 드라이버 실행파일을 PC에서 직접 실행할 수 있습니다. 
#From:IPPPPCHAP_AUTH_FAIL,CHAP authentication failed - please check login details. 
IPPPPCHAP_AUTH_FAIL,CHAP 인증 실패 - 로그인 상세 정보를 확인하십시오. 
#From:KR109,Log Entries 
KR109,로그 엔트리
#From:gw.gm.52,Tiberian Sun 
gw.gm.52,Tiberian Sun 
#From:KR34,This wizard will guide you through a step-by-step process to add your wireless device to your wireless network. 
KR34,무선 네트워크에 무선 장비 추가를 위해 단계별로 마법사를 따라 하십시오. 
#From:help726,Uniform Resource Locator is a unique address for files accessible on the Internet 
help726,Uniform Resource Locator is a unique address for files accessible on the Internet 
#From:.sdi.s6,Unknown 
.sdi.s6,Unknown 
#From:.name,Name 
.name,이름
#From:help66,Enter the local network IP address of the system hosting the server, for example <code>192.168.0.50</code>. 
help66,Enter the local network IP address of the system hosting the server, for example <code>192.168.0.50</code>. 
#From:IPFTPALG_REJECTED_PACKET,FTP ALG rejected packet from %v:%u to %v:%u 
IPFTPALG_REJECTED_PACKET,FTP ALG가 %v:%u 에서 %v:%u 로의 패킷을 거부하였습니다. 
#From:help692,SNMP 
help692,SNMP 
#From:fb.p.1,Access to this Web site is not allowed from this computer. 
fb.p.1,PC에서 웹사이트 접속이 거부되었습니다. 
#From:.contype,Connection Type 
.contype,연결 유형 
#From:help829,The port that you will use to address the management interface from the Internet. For example, if you specify port 1080 here, then, to access the router from the Internet, you would use a URL of the form: <code>http://my.domain.com:1080/</code>. 
help829,The port that you will use to address the management interface from the Internet. For example, if you specify port 1080 here, then, to access the router from the Internet, you would use a URL of the form: <code>http://my.domain.com:1080/</code>. 
#From:.specappsr,Application Rules 
.specappsr,응용프로그램 규칙
#From:.wepkey3,WEP Key 3 
.wepkey3,WEP Key 3 
#From:help353,The Invisible option allows you to hide your wireless network. When this option is set to Visible, your wireless network name is broadcast to anyone within the range of your signal. If you're not using encryption then they could connect to your network. When Invisible mode is enabled, you must enter the Wireless Network Name (SSID) on the client manually to connect to the network. 
help353,The Invisible option allows you to hide your wireless network. When this option is set to Visible, your wireless network name is broadcast to anyone within the range of your signal. If you're not using encryption then they could connect to your network. When Invisible mode is enabled, you must enter the Wireless Network Name (SSID) on the client manually to connect to the network. 
#From:at.RePortR,Remote Port Range 
at.RePortR,원격지 포트 범위 
#From:.vs.other,Other 
.vs.other,기타
#From:GW_SMTP_SERVER_ADDRESS_INVALID,The given server address (%s) is invalid 
GW_SMTP_SERVER_ADDRESS_INVALID,설정한 서버 IP 주소 (%s) 가 잘못되었습니다. 
#From:GW_WAN_L2TP_GATEWAY_IP_ADDRESS_INVALID,Invalid L2TP gateway IP address: %v 
GW_WAN_L2TP_GATEWAY_IP_ADDRESS_INVALID,L2TP 게이트웨이 IP 주소: %v 가 잘못되었습니다. 
#From:gw.gm.23,Halo: Combat Evolved 
gw.gm.23,Halo: Combat Evolved 
#From:help325,Always Broadcast 
help325,Always Broadcast 
#From:LW58,Shows the current value of the router's PIN. 
LW58,현재 공유기의 유효한 PIN을 보여 줍니다. 
#From:LW22usekey,Key In Use 
LW22usekey,사용중인 Key
#From:help550,Host 
help550,Host 
#From:bwn.RM,Reconnect Mode 
bwn.RM,재연결 모드
#From:sl.LogOps,Log Options 
sl.LogOps,로그 옵션
#From:help772,All of your Internet and network connection details are displayed on the Device Info page. The firmware version is also displayed here. 
help772,All of your Internet and network connection details are displayed on the Device Info page. The firmware version is also displayed here. 
#From:sl.LogDet,Log Details 
sl.LogDet,로그 상세정보
#From:.aa.method,Method 
.aa.method,방법
#From:help788,This is a relative measure of signal quality. The value is expressed as a percentage of theoretical best quality. Signal quality can be reduced by distance, by interference from other radio-frequency sources (such as cordless telephones or neighboring wireless networks), and by obstacles between the router and the wireless device. 
help788,This is a relative measure of signal quality. The value is expressed as a percentage of theoretical best quality. Signal quality can be reduced by distance, by interference from other radio-frequency sources (such as cordless telephones or neighboring wireless networks), and by obstacles between the router and the wireless device. 
#From:GW_WLAN_11B_STATIC_TURBO_INVALID,Static Turbo mode is not allowed with 802.11b. 
GW_WLAN_11B_STATIC_TURBO_INVALID,Static Turbo mode 는 802.11b 에서 사용할 수 없습니다. 
#From:.continue,Continue 
.continue,계속
#From:YM67,invalid destination ending IP Address. 
YM67,목적지 마지막 IP 주소가 잘못되었습니다. 
#From:GW_WIFISC_CFG_CHANGED_WARNING,<warn>Changing wireless security settings may cause Wi-Fi protected Setup to not function as expected.</warn> 
GW_WIFISC_CFG_CHANGED_WARNING,<warn>무선 보안 설정 변경으로 인해 Wi-Fi protected 설정이 제대로 동작하지 않을 수도 있습니다. </warn>
#From:help669,Retransmits the signal of an Access Point in order to extend it's coverage 
help669,Retransmits the signal of an Access Point in order to extend it's coverage 
#From:ZM10,Restart during DNS query 
ZM10,DNS 쿼리 중에 다시 시작합니다. 
#From:help349,The wireless section is used to configure the wireless settings for your D-Link router. Note that changes made in this section may also need to be duplicated on wireless clients that you want to connect to your wireless network. 
help349,The wireless section is used to configure the wireless settings for your D-Link router. Note that changes made in this section may also need to be duplicated on wireless clients that you want to connect to your wireless network. 
#From:help804,The Statistics page displays all of the LAN, WAN, and Wireless packet transmit and receive statistics. 
help804,The Statistics page displays all of the LAN, WAN, and Wireless packet transmit and receive statistics. 
#From:GW_WLAN_11A_CHANNEL_INVALID,Can not use 802.11b/g channel when the 802.11 mode is 802.11a. 
GW_WLAN_11A_CHANNEL_INVALID,802.11a 모드일 경우 802.11b/g 채널을 사용할 수 없습니다. 
#From:at.title.SERules,QoS Engine Rules 
at.title.SERules,QoS 엔진 규칙
#From:.devinfo,Device Info 
.devinfo,장비 정보
#From:.yes,Yes 
.yes,예
#From:YM176,The remote admin port should be in the range of 1 to 65535. 
YM176,원격 관리 포트는 1 ~ 65535 입니다. 
#From:KR81,NetBIOS allow LAN hosts to discover all other computers within the network, e.g. within Network Neighbourhood. 
KR81,NetBIOS 프로토콜로 LAN 호스트는 같은 네트워크의 다른 PC 들을 검색할 수 있습니다. (PC의 내 네트워크 환경) 
#From:help699,SSID 
help699,SSID 
#From:GW_NAT_TCP_PORT,TCP Port 
GW_NAT_TCP_PORT,TCP 포트
#From:YM155,The rule applies to a flow of messages for which host 2's port number is within the range set here. 
YM155,여기에서 설정한 범위안의 있는 호스트 2의 포트 번호 메시지 흐름에 대한 규칙을 적용합니다. 
#From:up.tz.62,(GMT+09:00) Yakutsk 
up.tz.62,(GMT+09:00) Yakutsk 
#From:help365,This mode is backwards compatible with non-Turbo (legacy) devices. This mode should be enabled when some devices on the wireless network are not Turbo enabled but support other Super G features mentioned above. 
help365,This mode is backwards compatible with non-Turbo (legacy) devices. This mode should be enabled when some devices on the wireless network are not Turbo enabled but support other Super G features mentioned above. 
#From:bd.NETBIOS_SCOPE,NetBIOS Scope 
bd.NETBIOS_SCOPE,NetBIOS 범위
#From:KR28,Session Aborted 
KR28,세션이 중단되었습니다. 
#From:.webfilter,Web Filter 
.webfilter,웹 필터 
#From:help192,In this section you can add entries to the Schedule Rules List below or edit existing entries. 
help192,In this section you can add entries to the Schedule Rules List below or edit existing entries. 
#From:af.ED,Enable DMZ 
af.ED,DMZ 설정 
#From:YM33,Invalid Aggregation Num Packets 
YM33,애그리게이션 Num 패킷이 잘못되었습니다. 
#From:gw.gm.31,Need for Speed 
gw.gm.31,속도 필요
#From:help271,A connection to the Internet is always maintained. 
help271,A connection to the Internet is always maintained. 
#From:help33,Allows multiple machines on the LAN to connect to their corporate networks using PPTP protocol. 
help33,Allows multiple machines on the LAN to connect to their corporate networks using PPTP protocol. 
#From:htsc.pingt.p,Start pinging the specified host. 
htsc.pingt.p,지정된 호스트로 핑 시작 
#From:help714,The amount of data that can be transferred in a given time period 
help714,The amount of data that can be transferred in a given time period 
#From:hhpt.sch,Select a schedule for when the service will be enabled. If you do not see the schedule you need in the list of schedules, go to the <a href="../Tools/Schedules.shtml" onclick="return jump_if();">Tools &rarr; Schedules</a> screen and create a new schedule. 
hhpt.sch,서비스에 해당하는 스케쥴을 선택하십시오. 스케쥴 리스트에 필요한 스케쥴이 없는 경우, <a href="../Tools/Schedules.shtml" onclick="return jump_if();">도구 &rarr; 스케줄</a> 스크린에서 새로운 스케쥴을 생성하십시오.
#From:YM76,Automatic 
YM76,자동
#From:wprn.tt2,Enable raw TCP port printing from the <em>Print ServerÂ </em> page under the <em>Tools</em> submenu. 
wprn.tt2,<em>Tools</em> 메뉴 아래의 <em>Print ServerÂ </em> 페이지에서 raw TCP 포트 프린팅을 설정하십시오.
#From:wprn.cps,Check Printer Status 
wprn.cps,프린터 상태 확인
#From:up.tz.45,(GMT+05:00) Ekaterinburg 
up.tz.45,(GMT+05:00) Ekaterinburg 
#From:sl.alert.2,This log will be sent to email address 
sl.alert.2,로그가 이메일 주소로 전송되었습니다. 
#From:help84,By default, the router automatically determines whether the underlying connection is an xDSL/Frame-relay network or some other connection type (such as cable modem or Ethernet), and it displays the result as <span class="option">Detected xDSL or Frame Relay Network</span>. If you have an unusual network connection in which you are actually connected via xDSL but for which you configure either "Static" or "DHCP" in the WAN settings, setting this option to <span class="option"> xDSL or Other Frame Relay Network</span> ensures that the router will recognize that it needs to shape traffic slightly differently in order to give the best performance. Choosing <span class="option">xDSL or Other Frame Relay Network</span> causes the measured uplink speed to be reported slightly lower than before on such connections, but gives much better results. 
help84,By default, the router automatically determines whether the underlying connection is an xDSL/Frame-relay network or some other connection type (such as cable modem or Ethernet), and it displays the result as <span class="option">Detected xDSL or Frame Relay Network</span>. If you have an unusual network connection in which you are actually connected via xDSL but for which you configure either "Static" or "DHCP" in the WAN settings, setting this option to <span class="option"> xDSL or Other Frame Relay Network</span> ensures that the router will recognize that it needs to shape traffic slightly differently in order to give the best performance. Choosing <span class="option">xDSL or Other Frame Relay Network</span> causes the measured uplink speed to be reported slightly lower than before on such connections, but gives much better results. 
#From:GW_FW_NOTIFY_FIRMWARE_AVAIL,Latest firmware version %d.%02d is available 
GW_FW_NOTIFY_FIRMWARE_AVAIL,최신 펌웨어 버전 %d.%02d 을 사용할 수 있습니다. 
#From:ss.RXPD,RX Packets Dropped 
ss.RXPD,RX 패킷이 폐기되었습니다. 
#From:WIFISC_AP_SETUP_UNLOCKED,Unlock AP setup 
WIFISC_AP_SETUP_UNLOCKED,AP 설정 잠김 해제
#From:GW_NAT_VS_PUBLIC_PORT_CAN_NOT_MATCH_HTTPS_ADMIN_PORT,Virtual server '%s' can not use the router's HTTPS WAN administration port, %u 
GW_NAT_VS_PUBLIC_PORT_CAN_NOT_MATCH_HTTPS_ADMIN_PORT,가상 서버 '%s' 는 공유기의 HTTPS WAN 관리 포트, %u 를 사용할 수 없습니다. 
#From:LS313,Release 
LS313,해제 
#From:IPPORTTRIGGERALG_TCP_PACKET_ALLOC_FAILURE,Port trigger ALG failed to allocate session for TCP packet from %v:%u to %v:%u 
IPPORTTRIGGERALG_TCP_PACKET_ALLOC_FAILURE,포트 트리거 ALG가 %v:%u 에서 %v:%u 로의 TCP 패킷 세션 할당에 실패하였습니다.  
#From:anet.wp.2,Auto 10/100/1000Mbps 
anet.wp.2,자동 10/100/1000Mbps
#From:wwa.note.hostname,Note: You may also need to provide a Host Name. If you do not have or know this information, please contact your ISP. 
wwa.note.hostname,주의: 호스트 이름에 대한 정보가 없으면 가입하신 서비스 공급업체(ISP)에서 확인하십시오.
#From:help504,Digital Subscriber Line. High bandwidth Internet connection over telephone lines 
help504,Digital Subscriber Line. High bandwidth Internet connection over telephone lines 
#From:bwz.WCNWz,Microsoft Windows Connect Now Wizard 
bwz.WCNWz,Microsoft Windows Connect Now Wizard
#From:ai.Action,Action 
ai.Action,동작
#From:RUNTIME_CONFIG_RESET_CONFIG_TO_FACTORY_DEFAULTS,Reset configuration to factory defaults 
RUNTIME_CONFIG_RESET_CONFIG_TO_FACTORY_DEFAULTS,공장 초기값으로 설정 복구
#From:sps.nopr,No printer detected 
sps.nopr,프린터가 검색되지 않았습니다. 
#From:.Fri,Fri 
.Fri,Fri 
#From:gw.hours,Hours 
gw.hours,시간  
#From:tps.lpd,LPD/LPR Printing 
tps.lpd,LPD/LPR 프린팅
#From:tf.FWUg,Firmware Upgrade 
tf.FWUg,펌웨어 업그레이드
#From:tss.RestAll,Restore all settings to the factory defaults. 
tss.RestAll,공장 초기 값으로 모든 설정 복구 
#From:gw.gm.4,Battlefield 1942 
gw.gm.4,Battlefield 1942 
#From:anet.wp.0,10Mbps 
anet.wp.0,10Mbps 
#From:help469,Uses a randomly selected 56-bit key that must be known by both the sender and the receiver when information is exchanged 
help469,Uses a randomly selected 56-bit key that must be known by both the sender and the receiver when information is exchanged 
#From:help373,Both of these options select some variant of Wi-Fi Protected Access (WPA) -- security standards published by the Wi-Fi Alliance. The <span class="option">WPA Mode</span> further refines the variant that the router should employ. 
help373,Both of these options select some variant of Wi-Fi Protected Access (WPA) -- security standards published by the Wi-Fi Alliance. The <span class="option">WPA Mode</span> further refines the variant that the router should employ. 
#From:ZM9,DNS Lookup Login Server 
ZM9,DNS Lookup 로그인 서버
#From:tt.dsoffs,Daylight Saving Offset 
tt.dsoffs,일광 절약 시간 오프셋 
#From:help629,A card installed in a computer or built onto the motherboard that allows the computer to connect to a network 
help629,A card installed in a computer or built onto the motherboard that allows the computer to connect to a network 
#From:wwz.auto.assign.key,Automatically assign a network key (Recommended) 
wwz.auto.assign.key,자동으로 네트워크 키 할당(권장) 
#From:wwl.s3.note.1,For information on which security features your wireless adapters support, please refer to the adapters' documentation. 
wwl.s3.note.1,무선 랜카드 정보를 확인하시려면 랜카드 설명서를 참고하십시오. 
#From:gw.gm.15,Doom 3 
gw.gm.15,Doom 3 
#From:hhts.save,Click <strong>Save</strong> to add a completed schedule to the list below. 
hhts.save,<strong>Save</strong> 버튼을 눌러 아래 리스트에 스케쥴을 완성하십시오. 
#From:GW_PURE_SETWANSETTINGS,HNAP SetDeviceSettings set wan mode to %S, %v/%v/%v 
GW_PURE_SETWANSETTINGS,HNAP SetDeviceSettings wan %S, %v/%v/%v 설정 
#From:at.Auto,Auto-detect 
at.Auto,자동 감지 
#From:help597,LED 
help597,LED 
#From:GW_DHCP_SERVER_RESERVED_MAC_UNIQUENESS_INVALID,Reserved IP address for this MAC address(%m) is already set. 
GW_DHCP_SERVER_RESERVED_MAC_UNIQUENESS_INVALID,이 MAC 주소 (%m)의 보유 IP 주소는 이미 사용중입니다. 
#From:help194,Place a checkmark in the boxes for the desired days or select the All Week radio button to select all seven days of the week. 
help194,Place a checkmark in the boxes for the desired days or select the All Week radio button to select all seven days of the week. 
#From:help746,A utility that allows you to view content and interact with all of the information on the World Wide Web 
help746,A utility that allows you to view content and interact with all of the information on the World Wide Web 
#From:LW7,PIN Settings 
LW7,PIN 설정
#From:aa.AT,Address Type 
aa.AT,주소 종류
#From:help53,Select a schedule for when this rule is in effect. If you do not see the schedule you need in the list of schedules, go to the <a href="../Tools/Schedules.shtml"> Tools&nbsp;&rarr;&nbsp;Schedules</a> screen and create a new schedule. 
help53,Select a schedule for when this rule is in effect. If you do not see the schedule you need in the list of schedules, go to the <a href="../Tools/Schedules.shtml"> Tools&rarr;Schedules</a> screen and create a new schedule. 
#From:YM87,For most applications, the priority classifiers ensure the right priorities, and specific WISH Rules are not required. 
YM87,대부분의 응용프로그램에서 우선 순위 분류는 우선 순위가 적절한지를 확인해 주고, 상세 WISH 규칙이 요구되지 않습니다. 
#From:GW_NAT_WAN_PING_FILTER_INVALID,The WAN Ping filter name %s does not exist 
GW_NAT_WAN_PING_FILTER_INVALID,WAN Ping 필터 이름 %s 이 존재하지 않습니다.
#From:gw.gm.71,Ubi.com 
gw.gm.71,Ubi.com 
#From:BIGPOND_FAILED,BigPond failed, see log for details 
BIGPOND_FAILED,BigPond 실패,  자세한 사항을 로그에서 확인하십시오. 
#From:aa.wiz.s1.msg3,Step 3 - Select the machine to which this policy applies 
aa.wiz.s1.msg3,Step 3 - 정책을 적용할 장비 선택 
#From:help835,If your PC's operating system is Windows XP Service Pack 2 (SP2) or later and you are using Windows Internet Explorer (IE) as your browser, you can use this option to save key parts of the router's current wireless security settings to your PC with Windows Connect Now (WCN) technology. The settings will then be available to propagate to other wireless devices. 
help835,If your PC's operating system is Windows XP Service Pack 2 (SP2) or later and you are using Windows Internet Explorer (IE) as your browser, you can use this option to save key parts of the router's current wireless security settings to your PC with Windows Connect Now (WCN) technology. The settings will then be available to propagate to other wireless devices. 
#From:at.lowpriority,(1..255) 
at.lowpriority,(1..255) 
#From:help898,The time between periodic updates to the Dynamic DNS, if your dynamic IP address has not changed. The timeout period is entered in hours. 
help898,The time between periodic updates to the Dynamic DNS, if your dynamic IP address has not changed. The timeout period is entered in hours. 
#From:bwn.PPTPSIPA,PPTP Server IP Address 
bwn.PPTPSIPA,PPTP 서버 IP 주소
#From:YM49,A name is required for rule number 
YM49,규칙 번호의 이름이 필요합니다. 
#From:help749,Wireless Fidelity 
help749,Wireless Fidelity 
#From:.routing,Routing 
.routing,라우팅
#From:hham.intro,Create a list of MAC addresses that you would either like to allow or deny access to your network. 
hham.intro,네트워크에 허용 또는 거부할 MAC 주소 리스트를 생성하십시오. 
#From:GW_INET_ACCESS_POLICY_TOO_MANY_IP_INVALID,You cannot add new IP address %v. You can only reuse IP addresses from other policies. 
GW_INET_ACCESS_POLICY_TOO_MANY_IP_INVALID,새로운 IP 주소 %v 를 추가할 수 없습니다. 다른 정책의 IP 주소를 다시 사용하는 것만 가능합니다. 
#From:YM112,Invalid L2TP server IP address 
YM112,잘못된 L2TP 서버 IP 주소
#From:help175,Saves the new or edited Inbound Filter Rule in the following list. 
help175,Saves the new or edited Inbound Filter Rule in the following list. 
#From:help471,The second layer of the OSI model. Controls the movement of data on the physical link of a network 
help471,The second layer of the OSI model. Controls the movement of data on the physical link of a network 
#From:ai.intro.1,The Inbound Filter option is an advanced method of controlling data received from the Internet. With this feature you can configure inbound data filtering rules that control data based on an IP address range. 
ai.intro.1,수신 필터 옵션은 인터넷에서 수신되는 데이터를 제어하는 수단입니다. 이 기능으로, IP 주소 범위에 따른 데이터를 제어하는 수신 데이터 필터링 규칙을 설정할 수 있습니다.
#From:KR90,H-Node, this indicates a Hybrid-State of operation. First WINS servers are tried, if any, followed by local network broadcast. This is generally the preferred mode if you have configured WINS servers. 
KR90,H-Node는 Hybrid-State 동작을 나타냅니다. 1차 윈즈 서버가 시도에 따라 로컬 네트워크 브로드캐스트가 뒤따릅니다. 윈즈 서버가 구성되어 있는 경우, 일반적으로 이 모드를 사용하는 것이 좋습니다.
#From:up.tz.69,(GMT+10:00) Vladivostok 
up.tz.69,(GMT+10:00) Vladivostok 
#From:wwa.title.s2,Step 2: Select your Time Zone 
wwa.title.s2,Step 2: 시간대역 선택 
#From:help838,Note that WCN only saves a few of the wireless security settings. When you use WCN to propagate settings to other wireless devices, you may have to make additional settings manually on those devices. 
help838,Note that WCN only saves a few of the wireless security settings. When you use WCN to propagate settings to other wireless devices, you may have to make additional settings manually on those devices. 
#From:GW_PURE_SETACCESSPOINTMODE,HNAP SetAccessPointMode %s returns %s, %s 
GW_PURE_SETACCESSPOINTMODE,HNAP SetAccessPointMode %s returns %s, %s
#From:tss.intro2,The current system settings can be saved as a file onto the local hard drive. The saved file or any other saved setting file created by device can be uploaded into the unit. 
tss.intro2,현재 시스템 설정을 로컬 하드 드라이버에 파일로 저장할 수 있습니다. 저장된 파일이나 장비에서 생성된 설정은 장비에 업로드 할 수 있습니다. 
#From:help736,Sending voice information over the Internet as opposed to the PSTN 
help736,Sending voice information over the Internet as opposed to the PSTN 
#From:up.tz.19,(GMT-03:00) Buenos Aires, Georgetown 
up.tz.19,(GMT-03:00) Buenos Aires, Georgetown 
#From:help354,If you select this option, the router automatically finds the channel with least interference and uses that channel for wireless networking. If you disable this option, the router uses the channel that you specify with the following <span class="option">Wireless Channel</span> option. 
help354,If you select this option, the router automatically finds the channel with least interference and uses that channel for wireless networking. If you disable this option, the router uses the channel that you specify with the following <span class="option">Wireless Channel</span> option. 
#From:help596,The amount of time that it takes a packet to get from the one point to another on a network. Also referred to as delay 
help596,The amount of time that it takes a packet to get from the one point to another on a network. Also referred to as delay 
#From:help872,If you selected the On Schedule option, select one of the defined schedule rules. If you do not see the schedule you need in the list of schedules, go to the <a href="../Tools/Schedules.shtml">Tools &rarr; Schedules</a> screen and create a new schedule. 
help872,If you selected the On Schedule option, select one of the defined schedule rules. If you do not see the schedule you need in the list of schedules, go to the <a href="../Tools/Schedules.shtml">Tools &rarr; Schedules</a> screen and create a new schedule. 
#From:ta.alert.5,You must enter the name of a configuration file first. 
ta.alert.5,먼저 설정 파일 이름을 입력해야 합니다. 
#From:bd.DAB,Always broadcast 
bd.DAB,항상 브로드캐스트
#From:.WPAenterprise,WPA-Enterprise 
.WPAenterprise,WPA-Enterprise 
#From:at.ETS,Enable Traffic Shaping 
at.ETS,트래픽 세이핑 설정
#From:KR73,If WAN Port Mode is set to "Bridge Mode", the following choices are displayed in place of the above choices, because the device is functioning as a bridge in a network that contains another router. 
KR73,WAN 포트 모드를 "Bridge Mode"로 설정 하면,  선택 내용들이 볼 수 있습니다. 이것은 장비가 다른 공유기에 연결되어 있는 네트워크과 브리지 모드로 동작하기 때문입니다.  
#From:up.tz.34,(GMT+02:00) Harare, Pretoria 
up.tz.34,(GMT+02:00) Harare, Pretoria 
#From:sps.pr,Printer 
sps.pr,프린터
#From:.r.alert5,Invalid Metric for route 
.r.alert5,잘못된 루트의 메트릭 값
#From:help706,Transmission Control Protocol 
help706,Transmission Control Protocol 
#From:.psk,Pre-Shared Key 
.psk,Pre-Shared Key 
#From:GW_NAT_WAN_PING_FILTER_WARNING,<warn>The WAN Ping filter name %s no longer exists, WAN PING will be disabled.</warn> 
GW_NAT_WAN_PING_FILTER_WARNING,<warn>The WAN Ping filter name %s 이 더 이상 존재 하지 않음, WAN PING 이 비활성화됩니다.</warn>
#From:.dyndns,Dynamic DNS 
.dyndns,Dynamic DNS 
#From:YM53,Invalid local end IP Address. 
YM53,잘못된 로컬 IP의 마지막 주소
#From:.deny,Deny 
.deny,거부
#From:help664,Reboot 
help664,Reboot 
#From:help276,Maximum Idle Time: 
help276,Maximum Idle Time: 
#From:help215,Note that WCN only sets a few of the wireless options. You will still need to go to the <a href="../Basic/Wireless.shtml">Wireless Settings</a> page to set other wireless options such as Super G Mode and transmission rate. 
help215,Note that WCN only sets a few of the wireless options. You will still need to go to the <a href="../Basic/Wireless.shtml">Wireless Settings</a> page to set other wireless options such as Super G Mode and transmission rate. 
#From:.to,to 
.to,to 
#From:aa.AT.0,IP 
aa.AT.0,IP 
#From:tt.Dec,Dec 
tt.Dec,Dec 
#From:YM140,WISH is short for Wireless Intelligent Stream Handling, a technology developed to enhance your experience of using a wireless network by prioritizing the traffic of different applications. 
YM140,WISH는 무선 지능 스트림 처리(Wireless Intelligent Stream Handling)의 약자로 여러 응용프로그램의 트래픽 우선 순위를 지정하여 무선 네트워크 데이터 처리를 향상 시키도록 개발한 기술입니다.
#From:GW_DHCPSERVER_REJECTED,The DHCP server address %v was rejected by the network device. If you have more than one DHCP server on your network this may cause IP address conflicts. 
GW_DHCPSERVER_REJECTED,네트워크 장비가 DHCP 서버 주소 %v 를 거부하였습니다. 네트워크 상에 IP 충돌을 발생시키는 DHCP 서버가 더 있는지를 확인하십시오. 
#From:up.tz.72,(GMT+12:00) Fiji, Kamchatka, Marshall Is. 
up.tz.72,(GMT+12:00) Fiji, Kamchatka, Marshall Is. 
#From:help879,Click the <span class="button_ref">Browse</span> button to locate the D-Link upgrade file on your computer. 
help879,Click the <span class="button_ref">Browse</span> button to locate the D-Link upgrade file on your computer. 
#From:GW_INET_ACCESS_POLICY_START_OTHERS,Policy %s started; Internet access for all non-specified systems changed to: %s 
GW_INET_ACCESS_POLICY_START_OTHERS,정책 %s 시작; 확인 되지 않은 모든 시스템의 인터넷 접속 변경 : %s
#From:help702,A feature of a firewall that monitors outgoing and incoming traffic to make sure that only valid responses to outgoing requests are allowed to pass though the firewall 
help702,A feature of a firewall that monitors outgoing and incoming traffic to make sure that only valid responses to outgoing requests are allowed to pass though the firewall 
#From:tsc.pingt.msg11,No response from host, retrying... 
tsc.pingt.msg11,호스트에서 응답이 없습니다, 다시 시도… 
#From:up.ae.de.1,Are you sure you want to delete this entry? 
up.ae.de.1,이 엔트리를 삭제하시겠습니까?
#From:help781,This area of the screen continually updates to show all DHCP enabled computers and devices connected to the LAN side of your router. The detection "range" is limited to the address range as configured in DHCP Server. Computers that have an address outside of this range will not show. If the DHCP Client (i.e. a computer configured to "Automatically obtain an address") supplies a Host Name then that will also be shown. Any computer or device that has a static IP address that lies within the detection "range" may show, however its host name will not. 
help781,This area of the screen continually updates to show all DHCP enabled computers and devices connected to the LAN side of your router. The detection "range" is limited to the address range as configured in DHCP Server. Computers that have an address outside of this range will not show. If the DHCP Client (i.e. a computer configured to "Automatically obtain an address") supplies a Host Name then that will also be shown. Any computer or device that has a static IP address that lies within the detection "range" may show, however its host name will not. 
#From:help161.2,Enter the MAC address of the desired. 
help161.2,Enter the MAC address of the desired. 
#From:tt.time.19,6 pm 
tt.time.19,6 pm 
#From:YM142,Allows the router to recognize HTTP transfers for many common audio and video streams and prioritize them above other traffic. Such streams are frequently used by digital media players. 
YM142,공유기는 HTTP가 일반적인 오디오, 비디오 스트림을 전송하는것을 허용합니다. 이 트래픽들은 다른 트래픽에 우선합니다. 이런 스트림이 디지털 미디어 플레이어를 사용하는데 쓰이는 스트림입니다.
#From:GW_DYNDNS_PASSWORD_INVALID,password must be specified 
GW_DYNDNS_PASSWORD_INVALID,비밀번호를 반드시 지정하시기 바랍니다. 
#From:YM152,The rule applies to a flow of messages for which one computer's IP address falls within the range set here. 
YM152,이 규칙은 여기에서 설정한 범위 안에 해당하는 PC의 IP 주소에 대한 메시지 흐름에 적용됩니다. 
#From:am.intro,Configure MAC Filtering below: 
am.intro,MAC 필터링 설정: 
#From:help811,The number of transmission failures that cause loss of a packet. 
help811,The number of transmission failures that cause loss of a packet. 
#From:LT119a,Invalid DHCP Server End IP Range 
LT119a,DHCP 서버의 마지막 IP 주소가 잘못되었습니다. 
#From:LW36,If you are having trouble accessing the Internet through the router, double check any settings you have entered on this page and verify them with your ISP if needed. 
LW36,공유기를 통해 인터넷 접속에 문제가 있는 경우, 이 페이지에서 설정한 값을 다시 한번 더 확인하시고, 필요한 경우 가입하신 ISP와도 확인하십시오.
#From:aw.TP.1,Medium 
aw.TP.1,중간 
#From:up.tz.24,(GMT) Casablanca, Monrovia 
up.tz.24,(GMT) Casablanca, Monrovia 
#From:help756,WISP 
help756,WISP 
#From:sw.intro,Use this option to view the wireless clients that are connected to your wireless router. 
sw.intro,이 옵션을 사용하여 무선 공유기에 연결되어 있는 무선 클라이언트를 확인할 수 있습니다. 
#From:help377,The encryption algorithm used to secure the data communication. TKIP (Temporal Key Integrity Protocol) provides per-packet key generation and is based on WEP. AES (Advanced Encryption Standard) is a very secure block based encryption. With the "TKIP and AES" option, the router negotiates the cipher type with the client, and uses AES when available. 
help377,The encryption algorithm used to secure the data communication. TKIP (Temporal Key Integrity Protocol) provides per-packet key generation and is based on WEP. AES (Advanced Encryption Standard) is a very secure block based encryption. With the "TKIP and AES" option, the router negotiates the cipher type with the client, and uses AES when available. 
#From:GW_NAT_PORT_TRIGGER_PORT_RANGE_INVALID,%s '%s' is invalid. 
GW_NAT_PORT_TRIGGER_PORT_RANGE_INVALID,%s '%s' 가 잘못되었습니다. 
#From:tps.lpd1,The LPD/LPR printing protocol uses a fixed IP address and queue name to communicate with your printer. 
tps.lpd1,LPD/LPR 프린팅 프로토콜은 프린터와 통신하기 위해서 고정 IP 주소와 큐를 사용합니다. 
#From:help257,and 
help257,and 
#From:help785,The transmission standard being used by the client. Values are 11a, 11b, 11g, or 11n for 802.11a, 802.11b, 802.11g, or 802.11n respectively. 
help785,The transmission standard being used by the client. Values are 11a, 11b, 11g, or 11n for 802.11a, 802.11b, 802.11g, or 802.11n respectively. 
#From:YM121,Invalid WEP Keys 
YM121,잘못된 WEP Keys
#From:.upgintro,The router will now be reprogrammed using the uploaded firmware file. Please wait <span id="timeleft"></span>&nbsp;seconds for this process to complete, after which you may access these web pages again. Pressing reload or back on your browser may cause this operation to fail. 
.upgintro,펌웨어 파일을 업로드하여 공유기를 재 시작 합니다.  프로세스가 끝날 때까지 <span id="timeleft"></span>&nbsp; 초 기다려 주십시오. 그 다음, 웹 페이지에 다시 접속하실 수 있습니다. 재시작(reload) 버튼이나 웹 브라우저를 종료하시거나의 뒤로 돌아가기 버튼을 누르면, 이 프로세스가 실패하는 원인이 될 수 있습니다.
#From:help819.8,Closed -- The connection is no longer active but the session is being tracked in case there are any retransmitted packets still pending. 
help819.8,Closed -- The connection is no longer active but the session is being tracked in case there are any retransmitted packets still pending. 
#From:bws.secs,(seconds) 
bws.secs,(초)
#From:PORT_FORWARDING,Port Forwarding 
PORT_FORWARDING,포트 포워딩
#From:help573,Internet Protocol 
help573,Internet Protocol 
#From:YM29,Invalid Fragmentation Threshold 
YM29,잘못된 프래그멘테이션 값
#From:help601,A group of computers in a building that usually access files from a server 
help601,A group of computers in a building that usually access files from a server 
#From:YM159,The WISH Sessions page displays full details of active local wireless sessions through your router when WISH has been enabled. A WISH session is a conversation between a program or application on a wirelessly connected LAN-side computer and another computer, however connected. 
YM159,WISH가 설정된 경우 공유기를 통과하는 액티브 로컬 무선 세션의 상세정보를 WISH 세션 페이지에서 확인할 수 있습니다. WISH 세션은 LAN 쪽 PC와 다른 쪽 PC가 무선으로 연결 되어 있는 경우 프로그램이나 응용프로그램간에 통신합니다.
#From:tt.Hour,Hour 
tt.Hour,시
#From:bwn.Mode.DHCP,Dynamic IP (DHCP) 
bwn.Mode.DHCP,유동 IP (DHCP)
#From:help290a,Enter the IP addresses of the DNS Servers. Leave the field for the secondary server empty if not used. 
help290a,Enter the IP addresses of the DNS Servers. Leave the field for the secondary server empty if not used. 
#From:YM120,Invalid Port Number. 
YM120,잘못된 포트 번호
#From:BIGPOND_LOGGING_OUT,BigPond logging out 
BIGPOND_LOGGING_OUT,BigPond 로그 아웃 
#From:wwl.BETTER,BETTER 
wwl.BETTER,BETTER 
#From:af.intro.1,The DMZ (Demilitarized Zone) option lets you set a single computer on your network outside of the router. If you have a computer that cannot run Internet applications successfully from behind the router, then you can place the computer into the DMZ for unrestricted Internet access. 
af.intro.1,DMZ(Demilitarized Zone)기능으로 PC를 공유기의 외부에 두는 것처럼 설정할 수 있습니다. 공유기 밑에서 제대로 동작하지 않는 응용프로그램이 있는 경우, 인터넷 접속을 제한을 받진 않는 DMZ 구간에 PC를 두십시오.
#From:.dns1,Primary DNS Server 
.dns1,1차 DNS 서버
#From:hhan.mc,If you are having trouble receiving multicast streams from the Internet, make sure the Multicast Streams option is enabled. 
hhan.mc,인터넷에서 멀티캐스트 스트림 수신에 문제가 있는 경우, 멀티캐스트 스트림 옵션이 설정되어 있는지 확인하십시오. 
#From:LW55,Enable the Wi-Fi Protected Setup feature. 
LW55,Wi-Fi Protected 설정 기능 활성화
#From:.tools,Tools 
.tools,도구
#From:.sdi.s2,Disconnected 
.sdi.s2,연결이 끊어졌습니다. 
#From:sps.usbport,USB Port 
sps.usbport,USB 포트
#From:GW_SCHED_ALLOC_FAILED,System error occured when allocating schedule %s 
GW_SCHED_ALLOC_FAILED,스케쥴 %s 할당시 시스템 에러가 발생하였습니다. 
#From:help179,Prevent all WAN users from accessing the related capability. (LAN users are not affected by Inbound Filter Rules.) 
help179,Prevent all WAN users from accessing the related capability. (LAN users are not affected by Inbound Filter Rules.) 
#From:tt.dsen2,Enable Daylight Saving 
tt.dsen2,일광 절약 시간 설정 
#From:.allow,Allow 
.allow,허용
#From:tt.Oct,Oct 
tt.Oct,Oct 
#From:help798,Select the level of events that you want to view. 
help798,Select the level of events that you want to view. 
#From:anet.wan.phyrate,WAN Port Speed 
anet.wan.phyrate,WAN 포트 속도
#From:.note,Note 
.note,주의
#From:YM106,Invalid PPTP subnet mask 
YM106,잘못된 PPTP 서브넷 마스크
#From:.aa.bsecure.block.unrated,Block Unrated Sites 
.aa.bsecure.block.unrated,Block Unrated Sites
#From:GW_WAN_BIGPOND_USERNAME_INVALID,A Big Pond user name MUST be specified 
GW_WAN_BIGPOND_USERNAME_INVALID,Big Pond 사용자 명을 반드시 지정하십시오.
#From:KR76,For example, 192.168.0.101. 
KR76,예: 192.168.0.101.
#From:aa.FPR.c6,Dest<br />Port<br />Start 
aa.FPR.c6,Dest<br />Port<br />Start 
#From:help69,UDP Ports To Open 
help69,UDP Ports To Open 
#From:GW_DHCPSERVER_EXHAUSTED,The DHCP server can offer no more IP addresses because all available addresses are in use. Increase the number of available IP addresses on the DHCP server configuration. 
GW_DHCPSERVER_EXHAUSTED,IP 주소 들이 모두 사용중이어서 DHCP 서버가 IP 주소를 더 이상 제공할 수 없습니다. DHCP 서버 설정에서 사용가능한 IP 주소를 늘려 주십시오. 
#From:GW_WAN_L2TP_SERVER_IP_ADDRESS_INVALID,Invalid L2TP server IP address: %v 
GW_WAN_L2TP_SERVER_IP_ADDRESS_INVALID,잘못된 L2TP 서버 IP 주소 : %v
#From:wwl.alert.pv5.2,WEP password must be exactly 13 alphanumeric characters. 
wwl.alert.pv5.2,WEP 비밀번호는 정확히 13 자리 영, 숫자입니다. 
#From:bd.DLT,DHCP Lease Time 
bd.DLT,DHCP 대여 기간
#From:GW_ROUTES_SUBNET_INVALID,Route subnet %v is invalid 
GW_ROUTES_SUBNET_INVALID,루트 서브넷 %v 이 잘못되었습니다. 
#From:wwa.title.wel,Welcome to the D-Link Internet Connection Setup Wizard 
wwa.title.wel,디링크 인터넷 연결 설정 마법사에 오신것을 환영합니다. 
#From:GW_LAN_INTERFACE_UP,LAN interface is up 
GW_LAN_INTERFACE_UP,LAN 인터페이스가 연결되었습니다. 
#From:ai.title.IFRL,Inbound Filter Rules List 
ai.title.IFRL,수신 필터 규칙 리스트 
#From:.aa.bsecure.drugs,Drugs 
.aa.bsecure.drugs,Drugs 
#From:.logs,Logs 
.logs,로그
#From:GW_LOG_EMAIL_ON_USER_REQUEST,Sending log email after administrator request 
GW_LOG_EMAIL_ON_USER_REQUEST,관리자 요청으로 로그 이메일 전송 
#From:am.FM.2,Turn MAC Filtering OFF 
am.FM.2,MAC 필터링 비활성화  
#From:help21,The port that will be accessed from the Internet. 
help21,The port that will be accessed from the Internet. 
#From:bwl.Mode,802.11 Mode 
bwl.Mode,802.11 Mode 
#From:LW1,IP address cannot be the same as LAN IP address of the router. 
LW1,IP 주소가 공유기의 LAN IP 주소와 같아서는 안됩니다. 
#From:bwn.AM,Address Mode 
bwn.AM,주소 모드
#From:bwn.BPS,BigPond Server 
bwn.BPS,BigPond 서버
#From:.ispinfo,Enter the information provided by your Internet Service Provider (ISP). 
.ispinfo,가입하신 인터넷 서비스 공급업체(ISP)에서 제공한 정보를 입력하십시오. 
#From:GW_DHCPSERVER_EXPIRED,A network computer never renewed its 'lease' of %v and has lost its right to use that address. If the device continues to use that address it may cause IP address conflicts. 
GW_DHCPSERVER_EXPIRED,PC의 'lease' %v 를 오랫동안 갱신되지 않아 해당 IP 주소를 사용할 수 없습니다. 해당 PC에서 계속 그 IP 주소를 사용하면, IP 충돌이 발생할 수 도 있습니다. 
#From:.rate,Rate 
.rate,속도
#From:help321,Your D-Link router, by default, has a static IP address of 192.168.0.1. This means that addresses 192.168.0.2 to 192.168.0.254 can be made available for allocation by the DHCP Server. 
help321,Your D-Link router, by default, has a static IP address of 192.168.0.1. This means that addresses 192.168.0.2 to 192.168.0.254 can be made available for allocation by the DHCP Server. 
#From:up.tz.06,(GMT-07:00) Mountain Time (US/Canada) 
up.tz.06,(GMT-07:00) Mountain Time (US/Canada) 
#From:GW_INET_ACL_IP_ADDRESS_IN_LAN_SUBNET_INVALID,IP address %v should be within LAN subnet (%v). 
GW_INET_ACL_IP_ADDRESS_IN_LAN_SUBNET_INVALID,IP 주소 %v 는 반드시 LAN 서브넷 (%v) 안에 있어야 합니다. 
#From:.bsecure.parental.serv,Sentinel Parental Controls Service 
.bsecure.parental.serv,자녀 보호 서비스 
#From:.success,Success 
.success,성공
#From:wwa.set.l2tp.title,Set Username and Password Connection (L2TP) 
wwa.set.l2tp.title,사용자명과 비밀번호 연결 설정(L2TP)
#From:bd.NETBIOS_REG_TYPE_B,Broadcast only (use when no WINS servers configured) 
bd.NETBIOS_REG_TYPE_B,브로드캐스트 전용(WINS 서버가 설정되지 않은 경우) 
#From:wwz.wwl.title.s3,Step 1: Welcome TO THE D-LINK WIRELESS SECURITY SETUP WIZARD 
wwz.wwl.title.s3,Step 1: 디링크 무선 보안 설정 마법사에 오신 것을 환영합니다. 
#From:.aa.bsecure.financial,Financial 
.aa.bsecure.financial,Financial 
#From:help342,Mac OS X 
help342,Mac OS X 
#From:YM135,The NAT forwards incoming connection requests to a LAN-side host only when they come from the same IP address with which a connection was established. This allows the remote application to send data back through a port different from the one used when the outgoing session was created. 
YM135,NAT는 연결이 이루어진 것과 같은 IP 주소에서 오는 통신에만 수신 연결 요청을 LAN 쪽 호스트로 전달합니다. 이 기능으로 원격지 응용프로그램이 송신 세션이 생성되었을 때 사용되었던 포트와는 다른 포트를 통해 데이터를 다시 돌려 보낼 수 있습니다.
#From:wprn.s2b,After clicking <em>Next</em>, you will be asked for permission to download an executable file. Please click <em>Run/Open</em> to allow the executable to run on your computer. If a second window appears prompting you to verify the publisher, please click <em>Run</em> again. 
wprn.s2b,<em>Next</em> 버튼을 누르면, 실행 파일을 다운 받을지를 물어봅니다. <em>Run/Open</em> 을 누르면, PC에서 실행할 수 있습니다. 퍼블리서를 확인하는 두 번째 창이 나타나면, <em>Run</em> 를 한번 더 누르십시오.
#From:help265,Select this option if your ISP requires you to use a PPPoE (Point to Point Protocol over Ethernet) connection. DSL providers typically use this option. This method of connection requires you to enter a <span class="option">Username</span> and <span class="option">Password</span> (provided by your Internet Service Provider) to gain access to the Internet. 
help265,Select this option if your ISP requires you to use a PPPoE (Point to Point Protocol over Ethernet) connection. DSL providers typically use this option. This method of connection requires you to enter a <span class="option">Username</span> and <span class="option">Password</span> (provided by your Internet Service Provider) to gain access to the Internet. 
#From:LT119,Invalid DHCP Server Start IP Range 
LT119,DHCP 서버 IP 시작 범위가 잘못되었습니다. 
#From:tsc.pingt.msg101,Pings received: 
tsc.pingt.msg101,핑 수신:
#From:.vs.public,Public 
.vs.public,공인
#From:GW_SMTP_EMAIL_RESOLVED_DNS,SMTP (Email) server %s is at IP address %v 
GW_SMTP_EMAIL_RESOLVED_DNS,SMTP (Email) 서버 %s 는 IP 주소 %v 에 있습니다. 
#From:bws.RSP,RADIUS server Port 
bws.RSP,RADIUS 서버 포트
#From:help684,Session layer 
help684,세션 계층
#From:KR93,B-Node, this indicates to use local network broadcast ONLY. This setting is useful where there are no WINS servers available, however, it is preferred you try M-Node operation first. 
KR93,B-Node는 로컬 네트워크에서 브로드캐스트 ONLY 로만 사용하는 것을 나타냅니다. 이 설정은 WINS 서버를 사용할 수 있는 경우 유용합니다. 그러나, M-Node를 먼저 동작시키는 것이 더 좋습니다.
#From:PPPOE_EVENT_CONNECT,Trying to establish a PPPoE connection 
PPPOE_EVENT_CONNECT,PPPoE 연결 완료 시도 
#From:GW_SECURE_REMOTE_ADMINSTRATION,Gateway remote administration enabled on port: %u 
GW_SECURE_REMOTE_ADMINSTRATION,게이트웨이 원격 관리가 포트에 설정 되었습니다. : %u
#From:.aa.bsecure.employment,Employment 
.aa.bsecure.employment,Employment 
#From:tt.auto,Automatic Time Configuration 
tt.auto,시간 자동 설정 
#From:help678,RSA 
help678,RSA 
#From:YM160,The IP address and, where appropriate, port number of the computer that originated a network connection. 
YM160,네트워크 연결을 시작한 PC의 IP 주소와 포트 번호 
#From:LS423,Assigned IP 
LS423,IP 할당
#From:PPTP_EVENT_LOW_RESOURCES_TO_QUEUE,The PPTP subsystem is low on resources. Connectivity may be affected. 
PPTP_EVENT_LOW_RESOURCES_TO_QUEUE,PPTP 서브시스템 자원이 낮습니다. 연결에 영향을 받을 수 있습니다. 
#From:GW_WAN_L2TP_GATEWAY_IN_SUBNET_INVALID,L2TP Gateway IP address %v must be within the WAN subnet. 
GW_WAN_L2TP_GATEWAY_IN_SUBNET_INVALID,L2TP 게이트웨이 IP 주소 %v 는 반드시 WAN 서브넷에 있어야 합니다. 
#From:IPL2TP_TUNNEL_UNEXPECTED_MESSAGE,L2TP local tunnel 0x%04X received unexpected control message (ignored) 
IPL2TP_TUNNEL_UNEXPECTED_MESSAGE,L2TP 로컬 터널 0x%04X이 예상밖의 제어 메시지를 수신했습니다.(무시)
#From:GW_WISH_RULES_HOST1_IP,'%s': Host 1 IP start, %v, must be less than host 1 IP end, %v 
GW_WISH_RULES_HOST1_IP,%s': 호스트 1 시작 주소, %v 는 반드시 호스트 1 IP 마지막 주소 %v 보다 적어야 합니다. 
#From:gw.gm.34,Neverwinter Nights 
gw.gm.34,Neverwinter Nights 
#From:tt.week.5,5th 
tt.week.5,5th 
#From:help760,Wi-Fi Protected Access. A Wi-Fi security enhancement that provides improved data encryption, relative to WEP. 
help760,Wi-Fi Protected Access. A Wi-Fi security enhancement that provides improved data encryption, relative to WEP. 
#From:wwl.intro.end,Below is a detailed summary of your wireless security settings. Please print this page out, or write the information on a piece of paper, so you can configure the correct settings on your wireless client adapters. 
wwl.intro.end,아래는 무선 보안 설정의 상세 내용을 요약한 것입니다. 이 페이지를 인쇄하거나 기록하여 PC의 무선 랜카드에 정확한 정보를 설정하십시오. 
#From:aa.Policy.Table,Policy Table 
aa.Policy.Table,정책 테이블
#From:tt.TimeConf,Time Configuration 
tt.TimeConf,시간 설정
#From:wprn.intro2,The wizard will guide you through the following steps. Click <em>Next</em> to begin. 
wprn.intro2,마법사가 설정 단계를 안내할 것입니다. <em>Next</em> 버튼을 눌러 시작하시기 바랍니다. 
#From:.none,None 
.none,None 
#From:.vs.private,Private 
.vs.private,사설
#From:KR86,This setting has no effect if the 'Learn NetBIOS information from WAN' is activated. 
KR86,WAN에서 NetBIOS 정보 가져오기' 가 활성화 되어 있으면 이 설정은 효과가 없습니다. 
#From:bd.NETBIOS_SEC_WINS,Secondary WINS IP Address 
bd.NETBIOS_SEC_WINS,2차 WINS IP 주소
#From:help524,A device that protects resources of the Local Area Network from unauthorized users outside of the local network 
help524,A device that protects resources of the Local Area Network from unauthorized users outside of the local network 
#From:help536,Gigabit Ethernet 
help536,Gigabit Ethernet 
#From:GW_INET_ACL_START_IP_ADDRESS_INVALID,Start IP address must be less than end IP address: %v-%v. 
GW_INET_ACL_START_IP_ADDRESS_INVALID,시작 IP 주소는 반드시 마지막 IP 주소보다 적어야 합니다. : %v-%v
#From:auth,Authentication 
auth,인증
#From:.aa.wiz.s3.title,Step 2: Select Schedule 
.aa.wiz.s3.title,Step 2: 스케쥴 선택
#From:help392,A pass-phrase that must match with the authentication server. 
help392,A pass-phrase that must match with the authentication server. 
#From:GW_LOG_EMAIL_ON_SCHEDULE,Sending log email on schedule 
GW_LOG_EMAIL_ON_SCHEDULE,스케쥴에 맞게 로그 이메일 전송 
#From:help499,Domain name 
help499,Domain name
#From:KR24,Cannot stop the process 
KR24,프로세스를 중단할 수 없습니다. 
#From:help562,Internet Group Management Protocol is used to make sure that computers can report their multicast group membership to adjacent routers 
help562,Internet Group Management Protocol is used to make sure that computers can report their multicast group membership to adjacent routers 
#From:wwa.intro.s2,Select the appropriate time zone for your location. This information is required to configure the time-based options for the router. 
wwa.intro.s2,계신 곳의 적절한 표준 시간대를 선택하십시오. 이 정보는 공유기의 시간 기반 옵션들을 설정할 때 꼭 필요합니다. 
#From:KR17,5GHz 
KR17,5GHz 
#From:.PPTPgw,PPTP Gateway IP Address 
.PPTPgw,PPTP 게이트웨이 IP 주소
#From:YM84,Host 2 IP Range 
YM84,호스트 2 IP 범위
#From:IPMMSALG_REJECTED_PACKET,MMS ALG rejected packet from %v:%u to %v:%u 
IPMMSALG_REJECTED_PACKET,MMS ALG 가 %v:%u 에서 %v:%u 로의 패킷을 거부하였습니다. 
#From:.wirelesst,Wireless Settings 
.wirelesst,무선 설정
#From:int.intro,There are two ways to set up your Internet connection: you can use the Web-based Internet Connection Setup Wizard, or you can manually configure the connection. 
int.intro,인터넷 연결을 설정하는 방법에는 두 가지가 있습니다: 웹기반 인터넷 연결 설정 마법사를 사용하시거나 직접 연결을 설정할 수 있습니다. 
#From:help741,WCN 
help741,WCN 
#From:help541,A standard that provides consistency of voice and video transmissions and compatibility for videoconferencing devices 
help541,A standard that provides consistency of voice and video transmissions and compatibility for videoconferencing devices 
#From:GW_LAN_ACCESS_DENIED,Access denied to LAN system with MAC address %m 
GW_LAN_ACCESS_DENIED,MAC 주소가 %m 인 LAN 시스템의 접속이 거부되었습니다. 
#From:GW_NAT_REJECTED_SPOOFED_PACKET,Blocked packet from %v to %v that was received from the wrong network interface (IP address spoofing) 
GW_NAT_REJECTED_SPOOFED_PACKET,잘못된 네트워크 인터페이스(IP address spoofing)로 수신된 %v 에서 %v 로의 패킷이 차단되었습니다. 
#From:help717,User Datagram Protocol 
help717,User Datagram Protocol 
#From:help88,A QoS Engine Rule identifies a specific message flow and assigns a priority to that flow. 
help88,QoS 엔진 규칙이 상세 메시지 flow를 확인하고 해당 flow에 대해 우선 순위를 할당합니다. 
#From:LW50,Enabling this option (the default setting) enables single VPN connections to a remote host. (But, for multiple VPN connections, the appropriate VPN ALG must be used.) Disabling this option, however, only disables VPN if the appropriate VPN ALG is also disabled. 
LW50,이 옵션(기본 설정) 활성화하여 원격지 호스트에 단일 VPN 연결을 할 수 있습니다. (그러나, 여러개의 VPN 연결은 반드시 VPN ALG를 사용해야 합니다.) 이 옵션을 비활성화하면, VPN ALG 또한 비활성화 된 경우에만 VPN을 비활성화 시킬 수 있습니다.
#From:PPTP_ALG_GRE_BLOCKED_INGRESS,Blocked incoming GRE packet from %v to %v 
PPTP_ALG_GRE_BLOCKED_INGRESS,%v 에서 %v 로의 수신 GRE 패킷 차단
#From:gw.gm.26,Jedi Knight II: Jedi Outcast 
gw.gm.26,Jedi Knight II: Jedi Outcast 
#From:up.tz.30,(GMT+01:00) West Central Africa 
up.tz.30,(GMT+01:00) West Central Africa 
#From:YM103,Invalid PPPoE IP address 
YM103,PPPoE IP 주소가 잘못되었습니다. 
#From:help361,Performance enhancing features such as Packet Bursting, FastFrames, and Compression. 
help361,Performance enhancing features such as Packet Bursting, FastFrames, and Compression. 
#From:.sched,Schedule 
.sched,스케쥴
#From:gw.gm.49,Starcraft 
gw.gm.49,Starcraft 
#From:IPFAT_MOUNT_FAILED,Failed to mount FAT device 
IPFAT_MOUNT_FAILED,FAT 장치 마운트에 실패하였습니다. 
#From:help883,Here are displayed the version numbers of the firmware currently installed in your router and the most recent upgrade that is available. 
help883,Here are displayed the version numbers of the firmware currently installed in your router and the most recent upgrade that is available. 
#From:gw.gm.75,KALI 
gw.gm.75,KALI 
#From:help604,Layer 2 Tunneling Protocol 
help604,Layer 2 Tunneling Protocol 
#From:ta.alert.6,Please wait, uploading configuration file 
ta.alert.6,설정 파일을 업로드 하는 동안 잠시만 기다려 주십시오. 
#From:LW4,Wi-Fi Protected Setup 
LW4,Wi-Fi Protected 설정
#From:GW_INET_ACCESS_POLICY_START_IP,Policy %s started; Internet access for IP address %v changed to: %s 
GW_INET_ACCESS_POLICY_START_IP,정책 %s 시작; IP 주소 %v 의 인터넷 접속이 변경되었습니다.: %s
#From:tt.time.23,10 pm 
tt.time.23,10 pm 
#From:help841a,Displays the time currently maintained by the router. If this is not correct, use the following options to configure the time correctly. 
help841a,Displays the time currently maintained by the router. If this is not correct, use the following options to configure the time correctly. 
#From:ag.title.4,Port Forwarding Rules 
ag.title.4,포트 포워딩 규칙 
#From:aa.alert.13,Please select a filter. 
aa.alert.13,필터를 선택해 주십시오. 
#From:help718,Unicast 
help718,Unicast 
#From:help551,Computer on a network 
help551,Computer on a network 
#From:gw.gm.68,WinMX 
gw.gm.68,WinMX 
#From:help890,When this option is enabled, an email will be sent to the email address configured in the email section whenever new firmware is available. You must have Email Notification enabled from the <a href="../Tools/EMail.shtml">Tools &rarr; Email&nbsp;Settings</a> page. 
help890,이 옵션을 설정하는 경우, 새로운 펌웨어가 나올 때마다 설정된 이메일 주소로 이메일을 전송할 것입니다. <a href="../Tools/EMail.shtml">Tools &rarr; EmailSettings</a> 페이지에서 이메일 알림 옵션을 설정해 주시기 바랍니다.
#From:help577,Internet Service Provider 
help577,Internet Service Provider 
#From:help260,Host Name: 
help260,Host Name: 
#From:help819.4,FIN Wait -- The client system has requested that the connection be stopped. 
help819.4,FIN Wait -- The client system has requested that the connection be stopped. 
#From:help357,If all of the wireless devices you want to connect with this router can connect in the same transmission mode, you can improve performance slightly by choosing the appropriate "Only" mode. If you have some devices that use a different transmission mode, choose the appropriate "Mixed" mode. 
help357,If all of the wireless devices you want to connect with this router can connect in the same transmission mode, you can improve performance slightly by choosing the appropriate "Only" mode. If you have some devices that use a different transmission mode, choose the appropriate "Mixed" mode. 
#From:GW_WLAN_11A_STATIC_TURBO_INVALID,For 11a Static Turbo mode, channel should be set to one of 42,50,58,152, or 160. 
GW_WLAN_11A_STATIC_TURBO_INVALID,11a Static Turbo 모드에서 채널은 반드시 다음중 한 채널을 선택하셔야 합니다. (42,50,58,152,160)
#From:.TCP,TCP 
.TCP,TCP 
#From:help515,Converting data into cyphertext so that it cannot be easily read 
help515,Converting data into cyphertext so that it cannot be easily read 
#From:anet.msg.upnp,Universal Plug and Play (UPnP) supports peer-to-peer Plug and Play functionality for network devices. 
anet.msg.upnp,UPnP(Universal Plug and Play)는 네트워크 장치의 PC 대 PC 플러그 앤 플레이를 지원합니다. 
#From:tt.alert.1only,Please select one of Automatic or Manual Time setting. Not both 
tt.alert.1only,자동 시간 설정 또는 직접 시간 설정 중 한 가지를 선택해 주십시오. (둘 다는 선택할 수 없음) 
#From:help776,Clicking the <span class="button_ref">DHCP Release</span> button unassigns the router's IP address. The router will not respond to IP messages from the WAN side until you click the <span class="button_ref">DHCP Renew</span> button or power-up the router again. Clicking the <span class="button_ref">DHCP Renew</span> button causes the router to request a new IP address from the ISP's server. 
help776,Clicking the <span class="button_ref">DHCP Release</span> button unassigns the router's IP address. The router will not respond to IP messages from the WAN side until you click the <span class="button_ref">DHCP Renew</span> button or power-up the router again. Clicking the <span class="button_ref">DHCP Renew</span> button causes the router to request a new IP address from the ISP's server. 
#From:help358,Super G Mode 
help358,Super G Mode 
#From:help32,Here you can enable or disable ALGs. Some protocols and applications require special handling of the IP payload to make them work with network address translation (NAT). Each ALG provides special handling for a specific protocol or application. A number of ALGs for common applications are enabled by default. 
help32,Here you can enable or disable ALGs. Some protocols and applications require special handling of the IP payload to make them work with network address translation (NAT). Each ALG provides special handling for a specific protocol or application. A number of ALGs for common applications are enabled by default. 
#From:gw.gm.3,Asheron's Call 
gw.gm.3,Asheron's Call 
#From:YM6,You do not have permissions to perform the specified action. 
YM6,권한이 없습니다. 
#From:YM58,Priority must be a number between 1 and 255 inclusive. 
YM58,우선 순위는 1~255 입니다. 
#From:.aa.bsecure.categ.select,Categories Selection 
.aa.bsecure.categ.select,카테고리 선택
#From:help823,The number of seconds of idle time until the router considers the session terminated. 
help823,The number of seconds of idle time until the router considers the session terminated. 
#From:.aa.bsecure.age.youth,Youth (13-17) 
.aa.bsecure.age.youth,청소년 (13-17)
#From:.L2TPip,L2TP IP Address 
.L2TPip,L2TP IP 주소
#From:.reboot,Reboot the Device 
.reboot,시스템 재부팅 
#From:wps.p3.1,There are two ways to add wireless device to your wireless network: 
wps.p3.1,무선 네트워크에 무선 장치를 추가하는 방법에는 두 가지가 있습니다. 
#From:LW17,Click <strong>Add Wireless Device Wizard</strong> to use Wi-Fi Protected Setup to add wireless devices to the wireless network. 
LW17,Wi-Fi Protected 설정을 사용하기 위해서는 <strong>WPS 무선 장비 추가</strong> 를 눌러 무선 장치를 추가하십시오. 
#From:help674,RJ-45 
help674,RJ-45 
#From:wprn.intro5,Step 3: Insert the printer driver CD if requested 
wprn.intro5,Step 3: 요청이 있으면, 프린터 드라이버 CD를 삽입하십시오. 
#From:YM18,Invalid Destination IP End address for Port Filter 
YM18,포트 필터의 목적지 IP 마지막 주소가 잘못되었습니다. 
#From:.bsecure.security.serv,Sentinel Security Services 
.bsecure.security.serv,Sentinel 보안 서비스 
#From:help814,The IP address and, where appropriate, port number of the local application. 
help814,The IP address and, where appropriate, port number of the local application. 
#From:help621,Sending data from one device to many devices on a network 
help621,Sending data from one device to many devices on a network 
#From:help412,AES. Government encryption standard 
help412,AES. Government encryption standard 
#From:LT210,WPA2-PSK/AES (also known as WPA2 Personal) 
LT210,WPA2-PSK/AES (also known as WPA2 Personal)
#From:GW_WAN_IDLE_TIME_INVALID,Invalid Idle Time (the permitted range is %u to %u) 
GW_WAN_IDLE_TIME_INVALID,휴지(Idle) 시간이 잘못되었습니다. 허용된 범위는 %u 에서 %u 입니다. 
#From:YM186,Multicast Group Address 
YM186,멀티캐스트 그룹 주소 
#From:tsc.pingt.msg8,received in 
tsc.pingt.msg8,수신
#From:help286,Typically L2TP connections are not always on. The D-Link router allows you to set the reconnection mode. The settings are: 
help286,Typically L2TP connections are not always on. The D-Link router allows you to set the reconnection mode. The settings are: 
#From:gw.gm.56,Unreal Tournament 
gw.gm.56,Unreal Tournament
#From:tf.intro.FWU,The Firmware Upgrade section can be used to update to the latest firmware code to improve functionality and performance. 
tf.intro.FWU,펌웨어 업그레이드 설정 섹션에서 성능과 기능을 향상시킨 가장 최신 펨웨어를 업데이트 할 수 있습니다. 
#From:up.tz.57,(GMT+08:00) Kuala Lumpur, Singapore 
up.tz.57,(GMT+08:00) Kuala Lumpur, Singapore 
#From:.aa.bsecure.sports,Sports 
.aa.bsecure.sports,Sports 
#From:GW_FW_NOTIFY_RESOLVED_DNS,Firmware upgrade server %s is at IP address %v 
GW_FW_NOTIFY_RESOLVED_DNS,펌웨어 업그레이드 서버 %s 는 IP 주소 %v 에 있습니다. 
#From:up.tz.00,(GMT-12:00) Eniwetok, Kwajalein 
up.tz.00,(GMT-12:00) Eniwetok, Kwajalein 
#From:af.EFT.2,Port And Address Restricted 
af.EFT.2,제한된 포트와 주소 
#From:hhts.intro,Schedules are used with a number of other features to define when those features are in effect. 
hhts.intro,스케쥴은 그 기능들이 동작하도록 지정된 경우 여러 다른 기능들과 함께 사용됩니다. 
#From:help713,Throughput 
help713,Throughput 
#From:help283,Time interval the machine can be idle before the PPTP connection is disconnected. The Maximum Idle Time value is only used for the "On demand" and "Manual" reconnect modes. 
help283,Time interval the machine can be idle before the PPTP connection is disconnected. The Maximum Idle Time value is only used for the "On demand" and "Manual" reconnect modes. 
#From:GW_QOS_RULES_NAME_ALREADY_USED,Name '%s' is already used. 
GW_QOS_RULES_NAME_ALREADY_USED,이름 '%s' 이 이미 사용중입니다. 
#From:bwz.intro.WCNWz,The following wizard uses Microsoft's Windows Connect Now technology to automatically configure the wireless settings on your Router. Make sure that you have sucessfully run Microsoft's Network Wireless Configuarion Wizard on your computer before using this feature. 
bwz.intro.WCNWz,다음 마법사는 마이크로소프트의 윈도우즈 커넥트 나우(Windows Connect Now) 기술을 사용하여 공유기의 무선을 자동으로 설정할 수 있습니다. 이 기능을 사용하기 전에 PC 상에 마이크로소프트사의 네트워크 무선 설정 마법사가 제대로 동작하는 지 먼저 확인하십시오.
#From:.auth,Authentication 
.auth,인증
#From:NET_RTC_SYNCHRONIZATION_FAILED_AFTER_RETRIES,Time synchronization failed after retries ... giving up 
NET_RTC_SYNCHRONIZATION_FAILED_AFTER_RETRIES,재시도 후 시간 동기화에 실패하였습니다… 중단 
#From:IPL2TP_TUNNEL_DISCONNECTING,L2TP local tunnel 0x%04X is disconnecting 
IPL2TP_TUNNEL_DISCONNECTING,L2TP 로컬 터널 0x%04X 이 끊어집니다. 
#From:GW_DHCP_SERVER_POOL_TO_IN_SUBNET_INVALID,DHCP server pool TO %v is not in LAN subnet %v. 
GW_DHCP_SERVER_POOL_TO_IN_SUBNET_INVALID,DHCP 서버 풀 TO %v 이 LAN 서브넷 %v 에 없습니다. 
#From:tsc.SchRuLs,Schedule Rules List 
tsc.SchRuLs,스케쥴 규칙 리스트 
#From:GW_NAT_H323_ALG_ACTIVATED_WARNING,<warn>The H.323 has been automatically enabled because a virtual server entry you created requires it.</warn> 
GW_NAT_H323_ALG_ACTIVATED_WARNING,<warn> 생성한 가상 서버 엔트리의 필요에 따라 H.323이 성공적으로 설정되었습니다.</warn>
#From:sd.FWV,Firmware Version 
sd.FWV,펌웨어 버전
#From:help188.wmm,Enabling WMM can help control latency and jitter when transmitting multimedia content over a wireless connection. 
help188.wmm,Enabling WMM can help control latency and jitter when transmitting multimedia content over a wireless connection. 
#From:help687,Used for sending and receiving email 
help687,Used for sending and receiving email 
#From:KR4,WLAN Partition 
KR4,WLAN 분리
#From:help567,Infrastructure 
help567,Infrastructure 
#From:help396,Optional Backup RADIUS Server 
help396,Optional Backup RADIUS Server 
#From:ta.SavConf,Save Configuration 
ta.SavConf,설정 저장
#From:LT120y,Invalid Primary WINS IP 
LT120y,1차 WINS IP 가 잘못되었습니다. 
#From:KR103,The Wi-Fi Protected Setup Network Settings have been saved successfully. 
KR103,Wi-Fi Protected 설정이 성공적으로 저장되었습니다. 
#From:YM44,Calista IP phone 
YM44,Calista IP phone 
#From:help618,Microsoft Point-to-Point Encryption is used to secure data transmissions over PPTP connections 
help618,Microsoft Point-to-Point Encryption is used to secure data transmissions over PPTP connections 
#From:LW47,If you consider yourself an advanced user and have configured a wireless router before, click <strong>Manual Wireless Network Setup</strong> to input all the settings manually. 
LW47,공유기를 전에 설정해 보셨거나 고급 사용자라고 생각하시면, <strong>무선 네트워크 직접 설정</strong> 를 눌러 모든 설정으로 직접 입력하시기 바랍니다.
#From:help876,This option restores all configuration settings back to the settings that were in effect at the time the router was shipped from the factory. Any settings that have not been saved will be lost. If you want to save your router configuration settings, use the Save Settings option above. 
help876,This option restores all configuration settings back to the settings that were in effect at the time the router was shipped from the factory. Any settings that have not been saved will be lost. If you want to save your router configuration settings, use the Save Settings option above. 
#From:help380,This option uses Wi-Fi Protected Access with a Pre-Shared Key (PSK). 
help380,This option uses Wi-Fi Protected Access with a Pre-Shared Key (PSK). 
#From:wwa.sdns,Secondary DNS Address 
wwa.sdns,2차 DNS 주소
#From:help441,The amount of bits that pass in given amount of time 
help441,The amount of bits that pass in given amount of time 
#From:GW_XML_CONFIG_GET_FAILED,Failed to export configuration file #%u 
GW_XML_CONFIG_GET_FAILED,설정 파일 #%u 내 보내기에 실패하였습니다. 
#From:.netfilt,Network Filter 
.netfilt,네트워크 필터 
#From:help466,Data 
help466,Data 
#From:li.Login,Login 
li.Login,로그인
#From:gw.days,Days 
gw.days,Days 
#From:WAN_ALREADY_CONNECTED,WAN is already connected 
WAN_ALREADY_CONNECTED,WAN 이 이미 연결되었습니다. 
#From:WIFISC_AP_SET_APSETTINGS_COMPLETE,SetAPSettings by (%s) complete 
WIFISC_AP_SET_APSETTINGS_COMPLETE,(%s)로 SetAPSettings 설정이 완료되었습니다.
#From:gw.vs.5,SMTP 
gw.vs.5,SMTP 
#From:bws.WPAM.3,WPA2 Only 
bws.WPAM.3,WPA2 Only 
#From:sps.protdis,This printing protocol is currently disabled. You can enable it <a href="../Tools/PS.shtml" onclick="return jump_if();">here</a>. 
sps.protdis,프린팅 프로토콜이 현재 비활성화 되어 있습니다. <a href="../Tools/PS.shtml" onclick="return jump_if();">here</a> 에서 활성화할 수 있습니다. 
#From:help488,Demilitarized zone 
help488,Demilitarized zone 
#From:wwl.WKL,Wep Key Length 
wwl.WKL,Wep Key 길이 
#From:td.PWK,Password or Key 
td.PWK,비밀 번호 또는 키(Key)
#From:tool.admin.vsname,Virtual Server Item 
tool.admin.vsname,가상 서버 종류 
#From:up.tz.50,(GMT+06:00) Astana, Dhaka 
up.tz.50,(GMT+06:00) Astana, Dhaka 
#From:YM168,Communication with the router failed 
YM168,공유기와의 통신에 실패하였습니다. 
#From:tsc.StrTime,Start Time 
tsc.StrTime,시작 시간 
#From:tsc.pingt.msg104,Shortest ping time (in milliseconds): 
tsc.pingt.msg104,가장 짧은 핑 시간 (밀리세컨드):
#From:help591,Kilobits per second 
help591,Kilobits per second 
#From:wprn.iderr,Printer Device ID Error 
wprn.iderr,프린터 장치 ID 에러 
#From:wps.KR42,Select this option will display the current wireless settings for you to configure the wireless device manually 
wps.KR42,무선 장치를 직접 설정할 수 있도록 현재 무선 설정을 이 옵션에서 확인할 수 있습니다. 
#From:td.Timeout,Timeout 
td.Timeout,타임아웃
#From:help402,AP. Device that allows wireless clients to connect to it and access the network 
help402,AP. Device that allows wireless clients to connect to it and access the network 
#From:.aa.apply.web.filter,Apply Web Filter 
.aa.apply.web.filter,웹필터 적용
#From:help661,Quality of Service 
help661,Quality of Service 
#From:resetUnconfiged,Reset to Unconfigured 
resetUnconfiged,설정하지 않은 상태로 리셋
#From:GW_NAT_NAME_USED_INVALID,Name '%s' is already used. 
GW_NAT_NAME_USED_INVALID,이름 '%s' 이 이미 사용중입니다. 
#From:GW_DYNDNS_SERVER_INDEX_VALUE_INVALID,invalid server index value: %d 
GW_DYNDNS_SERVER_INDEX_VALUE_INVALID,잘못된 서버 인덱스 값: %d
#From:GAMING,Gaming 
GAMING,게임
#From:tt.time.9,8 am 
tt.time.9,8 am 
#From:help495,DMZ 
help495,DMZ 
#From:GW_WAN_INTERFACE_UP,WAN interface is up. Connection to Internet established with IP Address %v and default gateway %v 
GW_WAN_INTERFACE_UP,WAN 인터페이스가 살았습니다. IP 주소 %v 와 디폴트 게이트웨이 %v 로 인터넷 연결이 이루어졌습니다. 
#From:IPNAT_BLOCKED_INGRESS,Blocked incoming packet from %v to %v (IP protocol %u) 
IPNAT_BLOCKED_INGRESS,%v 에서 %v 로 (IP 프로토콜 %u) 수신 패킷이 차단되었습니다. 
#From:.ripaddr,Router IP Address 
.ripaddr,공유기 IP 주소
#From:help831,Select a filter that controls access as needed for this admin port. If you do not see the filter you need in the list of filters, go to the <a href="../Advanced/Inbound_Filter.shtml" onclick="return jump_if();">Advanced &rarr; Inbound&nbsp;Filter</a> screen and create a new filter. 
help831,Select a filter that controls access as needed for this admin port. If you do not see the filter you need in the list of filters, go to the <a href="../Advanced/Inbound_Filter.shtml" onclick="return jump_if();">Advanced &rarr; InboundFilter</a> screen and create a new filter. 
#From:sa.TimeOut,Time Out 
sa.TimeOut,타임아웃
#From:help587,ISP 
help587,ISP 
#From:GW_LAN_INTERFACE_DOWN,LAN interface is down 
GW_LAN_INTERFACE_DOWN,LAN 인터페이스가 다운되었습니다. 
#From:help778,Depending on whether the WAN connection is currently established, you can click either the <span class="button_ref">Connect</span> to attempt to establish the WAN connection or the <span class="button_ref">Disconnect</span> to break the WAN connection. 
help778,Depending on whether the WAN connection is currently established, you can click either the <span class="button_ref">Connect</span> to attempt to establish the WAN connection or the <span class="button_ref">Disconnect</span> to break the WAN connection. 
#From:sps.qname,Queue Name 
sps.qname,큐 이름
#From:WARN,[WARN] 
WARN,[WARN] 
#From:help658,Preamble 
help658,Preamble 
#From:.seconds,seconds 
.seconds,초
#From:LW23,Enterprise 
LW23,엔터프라이즈
#From:ADVANCED_NETWORK,Advanced Network 
ADVANCED_NETWORK,고급 네트워크 
#From:GW_LOGS_CLEARED,Log cleared by IP address %v 
GW_LOGS_CLEARED,IP 주소 %v 에 의해 로그가 삭제되었습니다. 
#From:sl.Warning,Warning 
sl.Warning,경고
#From:wps.KR51,Select this option if your wireless device supports WPS (Wi-Fi Protected Setup) 
wps.KR51,사용하고 계신 무선 장치가 WPS(Wi-Fi Protected Setup)를 지원하는 경우 이 옵션을 선택하십시오. 
#From:aa.MAC,Machine Address 
aa.MAC,장치 주소 
#From:help274,Manual: 
help274,Manual:
#From:aw.sgi.h1,Using a short (400ns) guard interval can increase throughput. However, it can also increase error rate in some installations, due to increased sensitivity to radio-frequency reflections. 
aw.sgi.h1,짧은 (400ns) 가드 인터벌 사용으로 실제 처리량(throughput)을 향상시킬 수 있습니다. 그러나 무선 주파수 반사의 민감도를 증가시켜 일부 설치 중에 에러률도 증가시킬 수 있습니다.
#From:GW_WAN_PPTP_PASSWORD_INVALID,A PPTP password MUST be specified 
GW_WAN_PPTP_PASSWORD_INVALID,PPTP 비밀번호를 반드시 지정하십시오. 
#From:IPSTACK_REJECTED_SOURCE_ROUTED_PACKET,Blocked source-routed packet from %v to %v 
IPSTACK_REJECTED_SOURCE_ROUTED_PACKET,%v 에서 %v 로 소스 라우트 된 패킷이 차단되었습니다. 
#From:help722,Upgrade 
help722,Upgrade 
#From:help834,Use this option to restore previously saved router configuration settings. 
help834,Use this option to restore previously saved router configuration settings. 
#From:LW59,Restore the default PIN of the router. 
LW59,공유기의 디폴트 PIN 을 복구하였습니다. 
#From:wwa.pdns,Primary DNS Address 
wwa.pdns,1차 DNS 주소
#From:YM126,If you have enabled Wireless Security, make sure you write down the Key or Passphrase that you have configured. You will need to enter this information on any wireless device that you connect to your wireless network. 
YM126,무선 보안을 설정한 경우 설정한 키(Key) 또는 비밀번호(Passphrase)를 적어 두십시오. 무선 네트워크에 연결되는 모든 무선 장치에 이 정보를 입력해야 할 것입니다.
#From:.Sun,Sun 
.Sun,Sun 
#From:bd.title.clients,Number of Dynamic DHCP Clients 
bd.title.clients,동적 DHCP 클라이언트 수 
#From:wwz.auto.assign.key2,To prevent outsiders from accessing your network, the router will automatically assign a security (also called WEP or WPA key) to your network. 
wwz.auto.assign.key2,네트워크에 접속하는 외부 침입자를 방지하기 위해, 공유기는 WEP 또는 WPA 키를 자동으로 할당할 것입니다. 
#From:sw.title.list,Number Of Wireless Clients 
sw.title.list,무선 클라이언트 수
#From:up.tz.15,(GMT-04:00) Caracas, La Paz 
up.tz.15,(GMT-04:00) Caracas, La Paz 
#From:help483,Decibels relative to one milliwatt 
help483,Decibels relative to one milliwatt 
#From:help316,Once your D-Link router is properly configured and this option is enabled, the DHCP Server will manage the IP addresses and other network configuration information for computers and other devices connected to your Local Area Network. There is no need for you to do this yourself. 
help316,Once your D-Link router is properly configured and this option is enabled, the DHCP Server will manage the IP addresses and other network configuration information for computers and other devices connected to your Local Area Network. There is no need for you to do this yourself. 
#From:IPL2TP_TUNNEL_CONNECTING,Trying to connect to L2TP server 
IPL2TP_TUNNEL_CONNECTING,L2TP 서버 연결 시도
#From:NET_RTC_SYNCHRONIZED,Time synchronized 
NET_RTC_SYNCHRONIZED,시간이 동기화되었습니다. 
#From:af.ES,Enable SPI 
af.ES,SPI 설정 
#From:up.tz.10,(GMT-06:00) Saskatchewan 
up.tz.10,(GMT-06:00) Saskatchewan 
#From:bwn.RM.1,On demand 
bwn.RM.1,On demand
#From:IPSEC_ALG_ESP_BLOCKED_INGRESS,Blocked incoming GRE packet from %v to %v 
IPSEC_ALG_ESP_BLOCKED_INGRESS,%v 에서 %v 로 수신 GRE 패킷이 차단되었습니다. 
#From:NOT_LOGGED_IN_PLEASE_REFRESH,You are not logged in, please refresh the browser 
NOT_LOGGED_IN_PLEASE_REFRESH,로그인 되어 있지 않습니다. 윈도우 브라우저를 새로 고침 하십시오. 
#From:ub.continue,continue 
ub.continue,계속
#From:td.UNK,Username or Key 
td.UNK,사용자명 또는 키 
#From:LW66,Enabled/Configured 
LW66,활성화/설정 
#From:IPPMVM_MOUNT_FAILED,Failed to mount PV%d device 
IPPMVM_MOUNT_FAILED,PV%d 장비 마운트에 실패하였습니다. 
#From:.r.alert4,Invalid Interface for route 
.r.alert4,라우팅 인터페이스가 잘못되었습니다. 
#From:gw.gm.42,Rise of Nations 
gw.gm.42,Rise of Nations 
#From:1066,The LAN address that you want to reserve. 
1066,보유하고 싶은 LAN 주소 
#From:tsc.AllWk,All Week 
tsc.AllWk,1 주 내내
#From:.cantapplysettings,Insufficient Permissions 
.cantapplysettings,권한 부족 
#From:LY10,Add Wireless Station 
LY10,무선 스테이션 추가 
#From:.virtserv,Virtual Server 
.virtserv,가상 서버
#From:help2,The Virtual Server option gives Internet users access to services on your LAN. This feature is useful for hosting online services such as FTP, Web, or game servers. For each Virtual Server, you define a public port on your router for redirection to an internal LAN IP Address and LAN port. 
help2,The Virtual Server option gives Internet users access to services on your LAN. This feature is useful for hosting online services such as FTP, Web, or game servers. For each Virtual Server, you define a public port on your router for redirection to an internal LAN IP Address and LAN port. 
#From:help869,Select this option if you want logs to be sent by email when the log is full. 
help869,Select this option if you want logs to be sent by email when the log is full. 
#From:GW_DHCP_SERVER_POOL_FROM_INVALID,The DHCP server start address %v is not valid in the LAN subnet %v. 
GW_DHCP_SERVER_POOL_FROM_INVALID,DHCP 서버 시작 주소 %v 가 유효한 %v 서브넷에 없습니다. 
#From:WIFISC_AP_SETUP_LOCKED,Lock AP setup 
WIFISC_AP_SETUP_LOCKED,AP 설정 잠금 
#From:help670,RIP 
help670,RIP 
#From:YM91,Do you want to abandon changes you made to the current entry? 
YM91,지금 하신 수정사항을 취소하시겠습니까?
#From:IPPPPLCP_SET_LOCAL_OPTIONS,LCP sets local options: ACCM: %lx, ACFC: %u, PFC: %u, MRU: %u 
IPPPPLCP_SET_LOCAL_OPTIONS,LCP 로컬 옵션 설정 :  ACCM: %lx, ACFC: %u, PFC: %u, MRU: %u
#From:WIFISC_AP_SET_SELECTED_REGISTRAR_FAIL,Set Selected Registrar failed, reason (%s), err_code (%u) 
WIFISC_AP_SET_SELECTED_REGISTRAR_FAIL,선택한 Registrar 설정 실패, 원인(%s), err_code (%u)
#From:help750,Wi-Fi Protected Access 
help750,Wi-Fi Protected Access 
#From:ts.rd,Reboot The Device 
ts.rd,시스템 재부팅 
#From:help452,Browser 
help452,Browser 
#From:IPSEC_ALG_REJECTED_PACKET,IPSec ALG rejected packet from %v:%u to %v:%u 
IPSEC_ALG_REJECTED_PACKET,IPSec ALG가 %v:%u 에서 %v:%u 로의 패킷을 거부하였습니다. 
#From:tsc.pingt.msg3,Please wait, resolving 
tsc.pingt.msg3,잠시만 기다려 주십시오. 
#From:help39,Allows H.323 (specifically Microsoft Netmeeting) clients to communicate across NAT. Note that if you want your buddies to call you, you should also set up a virtual server for NetMeeting. Refer to the <a href="../Advanced/Virtual_Server.shtml"> Advanced &rarr; Virtual Server</a> page for information on how to set up a virtual server. 
help39,Allows H.323 (specifically Microsoft Netmeeting) clients to communicate across NAT. Note that if you want your buddies to call you, you should also set up a virtual server for NetMeeting. Refer to the <a href="../Advanced/Virtual_Server.shtml"> Advanced &rarr; Virtual Server</a> page for information on how to set up a virtual server. 
#From:GW_WIRELESS_DEVICE_DISCONNECTED,Wireless system with MAC address %m disconnected for reason: %s 
GW_WIRELESS_DEVICE_DISCONNECTED,MAC 주소가 %m인 무선 시스템이 원인: %s 으로 연결이 끊겼습니다. 
#From:help333,To input the MAC address of your system, enter it in manually or connect to the D-Link router's Web-Management interface from the system and click the <span class="button_ref">Copy Your PC's MAC Address</span> button. 
help333,To input the MAC address of your system, enter it in manually or connect to the D-Link router's Web-Management interface from the system and click the <span class="button_ref">Copy Your PC's MAC Address</span> button. 
#From:sd.WRadio,Wireless Radio 
sd.WRadio,Wireless Radio 
#From:ALLOWED_WEB_SITES,Allowed, Web Sites - %s%s, Ports - %s 
ALLOWED_WEB_SITES,허용, 웹사이트 - %s%s, 포트 - %s
#From:WCN_LOG_ABORT,WCN configuration aborted due to %s 
WCN_LOG_ABORT,%s 로 인해 WCN 설정이 중단되었습니다. 
#From:gw.sa.1,BitTorrent 
gw.sa.1,BitTorrent 
#From:LS3,Nothing has changed, save anyway? 
LS3,변경된 설정이 전혀 없습니다. 그래도 저장하시겠습니까? 
#From:help696,Stateful Packet Inspection 
help696,Stateful Packet Inspection 
#From:.UDP,UDP 
.UDP,UDP 
#From:help166,Putting a computer in the DMZ may expose that computer to a variety of security risks. Use of this option is only recommended as a last resort. 
help166,Putting a computer in the DMZ may expose that computer to a variety of security risks. Use of this option is only recommended as a last resort. 
#From:help117,The Access Control section allows you to control access in and out of devices on your network. Use this feature as Parental Controls to only grant access to approved sites, limit web access based on time or dates, and/or block access from applications such as peer-to-peer utilities or games. 
help117,The Access Control section allows you to control access in and out of devices on your network. Use this feature as Parental Controls to only grant access to approved sites, limit web access based on time or dates, and/or block access from applications such as peer-to-peer utilities or games. 
#From:GW_NAT_UNKNOWN,Unknown 
GW_NAT_UNKNOWN,Unknown 
#From:help795,The router automatically logs (records) events of possible interest in its internal memory. If there is not enough internal memory for all events, logs of older events are deleted, but logs of the latest events are retained. The Logs option allows you to view the router logs. You can define what types of events you want to view and the level of events to view. This router also has internal Syslog Server support so you can send the log files to a computer on your network that is running a Syslog utility. 
help795,The router automatically logs (records) events of possible interest in its internal memory. If there is not enough internal memory for all events, logs of older events are deleted, but logs of the latest events are retained. The Logs option allows you to view the router logs. You can define what types of events you want to view and the level of events to view. This router also has internal Syslog Server support so you can send the log files to a computer on your network that is running a Syslog utility. 
#From:bwn.L2TPICT,L2TP Internet Connection Type 
bwn.L2TPICT,L2TP 인터넷 연결 유형
#From:up.tz.73,(GMT+13:00) Nuku'alofa, Tonga 
up.tz.73,(GMT+13:00) Nuku'alofa, Tonga 
#From:GW_WLAN_11A_DYNAMIC_TURBO_INVALID,For 11a Dynamic Turbo mode, channel should be set to one of 40,48,56,153, or 161. 
GW_WLAN_11A_DYNAMIC_TURBO_INVALID,11a Dynamic Turbo mode 에서는 반드시 다음 채널만 설정하십시오.(40,48,56,153,161)
#From:.no,No 
.no,No 
#From:YM163,Note that, even when NTP Server is enabled, you must still choose a time zone and set the daylight saving parameters. 
YM163,NTP 서버가 설정된 경우라도 시간대를 선택해서 일광 절약 시간 변수를 설정하는 것에 주의하십시오. 
#From:up.tz.63,(GMT+09:30) Adelaide 
up.tz.63,(GMT+09:30) Adelaide 
#From:tf.FWF1,You must enter the name of a firmware file first. 
tf.FWF1,먼저 펌웨어 이름을 입력해 주십시오. 
#From:TA16,To use this feature, you must first have a Dynamic DNS account from one of the providers in the drop down menu. 
TA16,이 기능을 사용하기 위해서는 반드시 드랍다운 메뉴에 있는 서비스 공급업체 중 한 회사의 DDNS 계정이 있어야 합니다. 
#From:YM181,To use this feature, you must first have a Dynamic DNS account from one of the providers in the drop down menu. 
YM181,이 기능을 사용하기 위해서는 반드시 드랍다운 메뉴에 있는 서비스 공급업체 중 한 회사의 DDNS 계정이 있어야 합니다.
#From:.cantapplysettings.1,Insufficient Permission 
.cantapplysettings.1,권한 부족 
#From:up.tz.65,(GMT+10:00) Brisbane 
up.tz.65,(GMT+10:00) Brisbane 
#From:.priority,Priority 
.priority,우선순위
#From:WAN_ALREADY_DISCONNECTED,WAN is already disconnected 
WAN_ALREADY_DISCONNECTED,WAN 연결이 이미 끊겼습니다. 
#From:up.jt.1,There is unsaved data on this page. Do you want to abandon it? 
up.jt.1,이 페이지에 저장되지 않는 데이터가 있습니다. 그 데이터를 버리시겠습니까? 
#From:GW_INET_ACCESS_INITIAL_OTHERS,Internet access for all non-specified systems set to: %s 
GW_INET_ACCESS_INITIAL_OTHERS,지정되지 않는 모든 시스템의 인터넷 접속 설정 : %s
#From:hhai.ip,The starting and ending IP addresses are WAN-side address. 
hhai.ip,시작 주소와 마지막 주소가 WAN 쪽 주소입니다. 
#From:bd.NETBIOS_PRI_WINS,Primary WINS IP Address 
bd.NETBIOS_PRI_WINS,1차 WINS IP 주소
#From:help141.a,The Web sites listed here are used when the Web Filter option is enabled in <a href="../Advanced/Access_Control.shtml">Advanced &rarr; Access&nbsp;Control</a>. 
help141.a,The Web sites listed here are used when the Web Filter option is enabled in <a href="../Advanced/Access_Control.shtml">Advanced &rarr; AccessControl</a>. 
#From:wwl.DWKL,Default WEP Key to Use 
wwl.DWKL,사용가능한 기본 WEP Key
#From:as.intro.SA,This option is used to open single or multiple ports on your router when the router senses data sent to the Internet on a "trigger" port or port range. Special Applications rules apply to all computers on your internal network. 
as.intro.SA,이 옵션은 "트리거" 포트 또는 포트 범위에서 인터넷으로 데이터를 전송할 때, 공유기에서 단일 또는 복수개의 포트를 여는데 사용됩니다. 스페셜 응용프로그램 규칙이 내부 네트워크의 모든 PC에 적용됩니다.
#From:anet.wan.ping.1,Pinging public WAN IP addresses is a common method used by hackers to test whether your WAN IP address is valid. 
anet.wan.ping.1,공인 WAN IP 주소로 핑을 하는 것은 공유기의 WAN 주소가 유효한지 아닌지를 확인하기 위해 해커들이 사용하는 일반적인 방법입니다. 
#From:up.tz.44,(GMT+04:30) Kabul 
up.tz.44,(GMT+04:30) Kabul 
#From:help27,You might have trouble accessing a virtual server using its public identity (WAN-side IP-address of the gateway or its dynamic DNS name) from a machine on the LAN. Your requests may not be looped back or you may be redirected to the "Forbidden" page. 
help27,You might have trouble accessing a virtual server using its public identity (WAN-side IP-address of the gateway or its dynamic DNS name) from a machine on the LAN. Your requests may not be looped back or you may be redirected to the "Forbidden" page. 
#From:.aa.bsecure.obscene,Obscene 
.aa.bsecure.obscene,Obscene 
#From:as.IPSec,IPSec (VPN) 
as.IPSec,IPSec (VPN) 
#From:YM130,Invalid Server IP Address 
YM130,잘못된 서버 IP 주소 
#From:.admin,Admin 
.admin,관리자
#From:BLOCKED,Blocked 
BLOCKED,차단
#From:gw.gm.65,eDonkey 
gw.gm.65,eDonkey 
#From:wwa.msg.bigpond,BigPond Cable (Australia) 
wwa.msg.bigpond,BigPond Cable (Australia) 
#From:tsl.EnLog,Enable Logging To Syslog Server
tsl.EnLog,시스템 로그 서버로 로깅 설정
#From:help668,Repeater 
help668,Repeater 
#From:KR99,Select Dynamic DNS Server 
KR99,DDNS 서버를 선택하십시오. 
#From:help819.5,Close Wait -- the server system has requested that the connection be stopped. 
help819.5,Close Wait -- the server system has requested that the connection be stopped. 
#From:aw.TP.2,Low 
aw.TP.2,낮음 
#From:help433,The maximum amount of bytes or bits per second that can be transmitted to and from a network device 
help433,The maximum amount of bytes or bits per second that can be transmitted to and from a network device 
#From:bwsAT.,Authentication Timeout 
bwsAT.,인증 타임아웃
#From:GW_DHCP_SERVER_PRIMARY_AND_SECONDARY_WINS_IP_INVALID,Primary WINS IP address must be specified if secondary is also specified. 
GW_DHCP_SERVER_PRIMARY_AND_SECONDARY_WINS_IP_INVALID,1차 WINS IP 주소와 2차 WINS IP 주소를 반드시 지정해 주십시오. 
#From:GW_FIREWALL_NO_IP_RANGE_INVALID,Enable at least one Source IP Range for '%s' 
GW_FIREWALL_NO_IP_RANGE_INVALID,%s' 의 출발지 IP 주소 범위를 적어도 한 개 설정하십시오. 
#From:GW_NAT_VS_PROTOCOL_INVALID,Virtual server '%s' protocol number, %d, must be 0 or between 3 and 255. 
GW_NAT_VS_PROTOCOL_INVALID,가상 서버 '%s' 프로토콜 번호, %d 는  0 또는 3 ~ 255 입니다. 
#From:KR52,Select this option if you want to setup your network manually 
KR52,무선 네트워크를 직접 설정하시려면 이 옵션을 선택하십시오. 
#From:.setupdone,Setup Complete! 
.setupdone,설정 완료!
#From:KR33,Welcome to the Add Wireless Device Wizard 
KR33,무선 장치 추가 마법사에 오신 것을 환영합니다. 
#From:li.intro,Log in to the router 
li.intro,공유기에 로그인 하십시오. 
#From:ZM23,You must be logged in as 'admin' to perform this action. 
ZM23,이 설정을 하기 위해서는 반드시 '관리자' 으로 로그인 하시기 바랍니다. 
#From:LW40,This wizard is designed to assist you in connecting your wireless device to your router. It will guide you through step-by-step instructions on how to get your wireless device connected. Click the button below to begin. 
LW40,이 마법사는 공유기에 무선 장치를 연결할 수 있도록 도와 줍니다. 무선 장치를 공유기에 연결하는 방법을 단계별로 하나씩 안내해 드릴것입니다. 아래 버튼을 눌러 시작하십시오.
#From:af.intro.x,The Firewall Settings allow you to set a single computer on your network outside of the router. 
af.intro.x,방화벽 기능으로 공유기 PC 한 대를 공유기 외부 네트워크에 두는 것처럼 설정할 수 있습니다. 
#From:LY4,Lock Wireless Security Settings 
LY4,무선 보안 설정 잠금
#From:IPSMTPCLIENT_MSG_FAILED,SMTP client failed to send email 
IPSMTPCLIENT_MSG_FAILED,SMTP 클라이언트가 이메일 전송에 실패하였습니다. 
#From:LW34,If you consider yourself an advanced user and have configured a router before, click <strong>Manual Internet Connection Setup</strong> to input all the settings manually. 
LW34,공유기를 전에 설정해 보셨거나 고급 사용자라고 생각하시면, <strong>인터넷 연결  직접 설정</strong> 을 눌러 모든 설정을 직접 입력하시기 바랍니다. 
#From:YM25,Are you sure you want to delete 
YM25,정말로 삭제하시겠습니까? 
#From:bwz.note.ConWz,Before launching these wizards, please make sure you have followed all steps outlined in the Quick Installation Guide included in the package. 
bwz.note.ConWz,이 마법사들을 실행하기 전에, 제품 박스안에 들어있는 설치 매뉴얼에서 강조한 모든 단계를 따라했는지 확인하시기 바랍니다. 
#From:YM15,Invalid Destination IP Start address for Port Filter 
YM15,잘못된 포트 필터 IP 목적지 시작 주소 
#From:bwl.SGM,Super&nbsp;G&trade;&nbsp;Mode 
bwl.SGM,Super&trade;GMode 
#From:gw.gm.64,Gnutella 
gw.gm.64,Gnutella 
#From:help268,Reconnect Mode: 
help268,Reconnect Mode: 
#From:help170,Add/Update Inbound Filter Rule 
help170,Add/Update Inbound Filter Rule 
#From:tps.intro4,To use the shared printer from this computer, launch the Printer Wizard from the <a href="../Basic/Wizard.shtml" onclick="return jump_if();"> <i>WizardÂ </i> page</a>. 
tps.intro4,컴퓨터에서 공유 프린터를 사용하기 위해서, <a href="../Basic/Wizard.shtml" onclick="return jump_if();"> <i>WizardÂ </i> page</a> 의 프린터 마법사를 실행하십시오. 
#From:help681,A computer on a network that provides services and resources to other computers on the network 
help681,A computer on a network that provides services and resources to other computers on the network 
#From:NONE_BLOCKED,None Blocked 
NONE_BLOCKED,차단되지 않았습니다. 
#From:tt.May,May 
tt.May,May 
#From:bwn.BPICT,Big Pond Internet Connection Type 
bwn.BPICT,Big Pond 인터넷 연결 종류 
#From:GW_WLAN_80211X_RADIUS_INVALID,Radius server address is not valid. 
GW_WLAN_80211X_RADIUS_INVALID,Radius 서버 주소가 잘못되었습니다. 
#From:tt.time.15,2 pm 
tt.time.15,2 pm 
#From:wprn.tt7,OR, click <em>Next</em> to continue anyway and later choose <em>No</em> when asked if you'd like to print a test page. 
wprn.tt7,OR, <em>Next</em> 버튼을 눌러 계속 진행하고 인쇄 테스트 페이지를 할 것인지 물으면 <em>No</em> 를 누르십시오.  
#From:GW_WISH_RULES_PROTOCOL,'%s': Protocol, %u, needs to be between 0 and 257 
GW_WISH_RULES_PROTOCOL,%s': 프로토콜, %u, 0 ~ 257이어야 합니다. 
#From:.Tue,Tue 
.Tue,Tue 
#From:GW_DHCPSERVER_START,Starting DHCP server 
GW_DHCPSERVER_START,DHCP 서버 시작 
#From:ss.clear_stats,Clear Statistics 
ss.clear_stats,통계 정보 삭제 
#From:help632,Network Time Protocol 
help632,Network Time Protocol
#From:LS316,Login 
LS316,로그인
#From:ZM15,User has logged out 
ZM15,사용자가 로그 아웃되었습니다. 
#From:help409,ADSL 
help409,ADSL 
#From:help197,The end time is entered in the same format as the start time. The hour in the first box and the minutes in the second box. The end time is used for most other rules, but is not normally used for email events. 
help197,The end time is entered in the same format as the start time. The hour in the first box and the minutes in the second box. The end time is used for most other rules, but is not normally used for email events. 
#From:help765,802.11 
help765,802.11 
#From:GW_WAN_DISCONNECT_ON_INACTIVE,WAN connection inactive too long so attempting to disconnect 
GW_WAN_DISCONNECT_ON_INACTIVE,WAN 연결 비활성 상태가 너무 오래 되어 연결을 끊습니다. 
#From:DHCP_CLIENT_RELEASED_LEASE,The DHCP address %v is released by the user 
DHCP_CLIENT_RELEASED_LEASE,DHCP 주소 %v 가 사용자에게 할당되었습니다. 
#From:ai.intro.3,Filter rules can be used with Virtual Server, Port Forwarding, or Remote Administration features. 
ai.intro.3,필터 규칙은 가상 서버, 포트 포워딩, 원격 관리 기능과 할께 사용할 수 있습니다. 
#From:wwa.set.sipa.title,Set Static IP Address Connection 
wwa.set.sipa.title,고정 IP 주소 연결 설정 
#From:help887,Some firmware upgrades reset the configuration options to the factory defaults. Before performing an upgrade, be sure to save the current configuration from the <a href="../Tools/System.shtml">Tools &rarr; System</a> screen. 
help887,Some firmware upgrades reset the configuration options to the factory defaults. Before performing an upgrade, be sure to save the current configuration from the <a href="../Tools/System.shtml">Tools &rarr; System</a> screen. 
#From:help421,Application layer 
help421,Application layer 
#From:GW_DHCP_SERVER_RESERVATION_DISABLED_IN_CONFLICT_WARNING,<warn>A DHCP Reservation has been disabled because it conflicts with the routers own LAN IP.</warn> 
GW_DHCP_SERVER_RESERVATION_DISABLED_IN_CONFLICT_WARNING,<warn>공유기 LAN IP 주소와의 충돌로 인해 DHCP 서버 IP 보유(reservation) 기능이 비활성화 되었습니다.</warn>
#From:GW_DYNDNS_HOST_NAME_INVALID,host must be specified 
GW_DYNDNS_HOST_NAME_INVALID,호스트는 반드시 지정되어야 합니다. 
#From:help725,URL 
help725,URL 
#From:LW42,Manual Wireless Network Setup 
LW42,수동 무선 네트워크 설정 
#From:GW_WAN_PPTP_GATEWAY_IP_ADDRESS_INVALID,Invalid PPTP gateway IP address: %v 
GW_WAN_PPTP_GATEWAY_IP_ADDRESS_INVALID,잘못된 PPTP 게이트웨 IP 주소 : %v
#From:up.tz.71,(GMT+12:00) Auckland, Wellington 
up.tz.71,(GMT+12:00) Auckland, Wellington 
#From:hhaf.alg,ALGs provide special handling of the IP payload for some protocols and applications to make them work with network address translation (NAT). If you are having trouble using any of these applications, try both enabling and disabling the corresponding ALG. 
hhaf.alg,ALG는 일부 프로토콜과 응용프로그램의 IP 페이로드를 특별히 처리하여 NAT와 동작할 수 있도록 해 줍니다. 응용프로그램을 사용하는 데 문제가 있는 경우, ALG를 설정하거나 또는 설정을 풀어 보시기 바랍니다.
#From:rs.intro.4,The restored configuration file has been uploaded successfully. 
rs.intro.4,선택하신 설정 파일로 업데이트가 성공적으로 완료 되었습니다. 
#From:GW_QOS_RULES_REMOTE_IP_END_SUBNET,'%s': Remote IP end '%v' is in the LAN subnet 
GW_QOS_RULES_REMOTE_IP_END_SUBNET,%s': 원격지 마지막 주소 '%v' 가 LAN 네트워크와 같은 네트워크에 있습니다 
#From:.NA,N/A 
.NA,N/A 
#From:help843,Check this option if your location observes daylight saving time. 
help843,Check this option if your location observes daylight saving time. 
#From:help660,QoS 
help660,QoS 
#From:hhav.r_gateway,The gateway IP address is the IP address of the router, if any, used to reach the specified destination. 
hhav.r_gateway,공유기 IP 주소는 지정된 목적지로 가기 위한 게이트웨이 주소로 사용됩니다. 
#From:INFO,[INFO] 
INFO,[INFO] 
#From:wprn.tt11,Verify that a printer is attached to the router's USB port. 
wprn.tt11,공유기의 USB 포트에 연결되어 있는 프린터를 확인하십시오. 
#From:.tstats,Traffic Statistics 
.tstats,트래픽 통계
#From:help112,Metric: 
help112,Metric: 
#From:help38,Allows FTP clients and servers to transfer data across NAT. Refer to the <a href="../Advanced/Virtual_Server.shtml">Advanced&nbsp;&rarr;&nbsp;Virtual&nbsp;Server</a> page if you want to host an FTP server. 
help38,Allows FTP clients and servers to transfer data across NAT. Refer to the <a href="../Advanced/Virtual_Server.shtml">Advanced&rarr;VirtualServer</a> page if you want to host an FTP server. 
#From:IPPPPLCP_SET_REMOTE_OPTIONS,LCP sets remote options: ACCM: %lx, ACFC: %u, PFC: %u, MRU: %u 
IPPPPLCP_SET_REMOTE_OPTIONS,LCP가 원격지 옵션을 설정합니다. : ACCM: %lx, ACFC: %u, PFC: %u, MRU: %u
#From:tf.msg.FWUgReset,Some firmware upgrades reset the configuration options to the factory defaults. Before performing an upgrade, be sure to save the current configuration from the <a href="../Tools/System.shtml" onclick="return jump_if();"> Tools &rarr; System</a> screen. 
tf.msg.FWUgReset,일부 펌웨어 업그레이드로 설정이 공장 초기화로 리셋합니다. 업그레이드를 하기 전에 <a href="../Tools/System.shtml" onclick="return jump_if();"> 도구 &rarr; 시스템</a> 에서 현재 설정을 꼭 저장하십시오. 
#From:bd.NETBIOS_WAN,Learn NetBIOS information from WAN 
bd.NETBIOS_WAN,WAN 에서 NetBIOS 정보 가져오기
#From:tt.Mar,Mar 
tt.Mar,Mar 
#From:up.tz.28,(GMT+01:00) Brussels, Copenhagen, Madrid, Paris 
up.tz.28,(GMT+01:00) Brussels, Copenhagen, Madrid, Paris 
#From:help576,IPsec provides security at the packet processing layer of network communication 
help576,IPsec provides security at the packet processing layer of network communication 
#From:aw.igslot,Force Short Slot for 11N Clients 
aw.igslot,11N 사용자용 Short Slot 강제 설정
#From:ZM2,(default if not matched by anything else) 
ZM2,(맞는 정보가 없으면 디폴트입니다.)
#From:LT7,You do not have permission to perform the specified action. 
LT7,이 설정을 할 권한이 없습니다. 
#From:WIFISC_AP_SET_SELECTED_REGISTRAR,Set Selected Registrar 
WIFISC_AP_SET_SELECTED_REGISTRAR,선택된 Registrar 설정
#From:help214,When the necessary preparations are complete, the WCN technology will propagate the wireless network settings from your PC to the router. Then you will have to reboot the router for the settings to take effect. 
help214,When the necessary preparations are complete, the WCN technology will propagate the wireless network settings from your PC to the router. Then you will have to reboot the router for the settings to take effect. 
#From:at.Both,Both 
at.Both,Both 
#From:ZM22,Day of Week 
ZM22,요일
#From:help.ts.rfd,Restore To Factory Default Settings 
help.ts.rfd,공장 초기 설정으로 복구
#From:.aa.allow.all,Log Web Access Only 
.aa.allow.all,웹 접속 로그만
#From:wwl.title.wel,Welcome to the Wireless Security Setup Wizard 
wwl.title.wel,무선 보안 설정 마법사에 오신 것을 환영합니다.
#From:LW44,If you would like to configure the wireless settings of your new D-Link Systems Router manually, then click on the Manual Wireless Network Setup button below. 
LW44,공유기의 무선 설정을 직접 할 경우, 아래에 있는 수동 무선 네트워크 설정 버튼을 누르십시오.
#From:help209,If your PC's operating system is Windows XP Service Pack 2 (SP2) or later and you are using Windows Internet Explorer (IE) as your browser, you can use Windows Connect Now (WCN) technology to help configure the router's wireless security settings. 
help209,If your PC's operating system is Windows XP Service Pack 2 (SP2) or later and you are using Windows Internet Explorer (IE) as your browser, you can use Windows Connect Now (WCN) technology to help configure the router's wireless security settings. 
#From:YM70,destination starting port should be between 0 and 65535 inclusive. 
YM70,목적지 시작 포트는 0 ~ 65535입니다. (65535 포함)
#From:GW_UPNP_IGD_PORTMAP_VS_CHANGE,UPnP changed VS entry %v <-> %v:%d <-> %v:%d %s to %s 
GW_UPNP_IGD_PORTMAP_VS_CHANGE,UPnP VS 엔트리 %v <-> %v:%d <-> %v:%d %s 를 %s 로 변경합니다. 
#From:wwa.wanmode.l2tp,Username / Password Connection (L2TP) 
wwa.wanmode.l2tp,사용자명/비밀번호 연결(L2TP)
#From:.dmzh,DMZ Host 
.dmzh,DMZ 호스트
#From:GW_TIME_RESOLVED_DNS,Time server %s is at IP address %v 
GW_TIME_RESOLVED_DNS,타임서버 %s 는 IP 주소 %v 에 있습니다. 
#From:bws.EAPx,EAP (802.1x) 
bws.EAPx,EAP (802.1x) 
#From:aa.PolName,Policy Name 
aa.PolName,정책명
#From:help751,An updated version of security for wireless networks that provides authentication as well as encryption 
help751,An updated version of security for wireless networks that provides authentication as well as encryption 
#From:help735,Voice over IP 
help735,Voice over IP 
#From:help143s,The Web Filter section is one of two means by which you can specify the web sites you want to allow. You also have the alternative of using the Sentinel Parental Controls Service, which allows you to specify broad categories of web sites and saves you the trouble of entering specific web site URLs. For more information about the Sentinel service, refer to <a href="../Tools/Sentinel.shtml">Tools&nbsp;&rarr;&nbsp;Sentinel</a>. 
help143s,The Web Filter section is one of two means by which you can specify the web sites you want to allow. You also have the alternative of using the Sentinel Parental Controls Service, which allows you to specify broad categories of web sites and saves you the trouble of entering specific web site URLs. For more information about the Sentinel service, refer to <a href="../Tools/Sentinel.shtml">Tools&rarr;Sentinel</a>. 
#From:help363,This mode is not backwards compatible with non-Turbo (legacy) devices. This mode should only be enabled when all devices on the wireless network are Static Turbo enabled. 
help363,This mode is not backwards compatible with non-Turbo (legacy) devices. This mode should only be enabled when all devices on the wireless network are Static Turbo enabled. 
#From:.aa.bsecure.web_newsgroup,Web Newsgroup 
.aa.bsecure.web_newsgroup,웹 뉴스그룹
#From:wwa.set.sipa.msg,To set up this connection you will need to have a complete list of IP information provided by your Internet Service Provider. If you have a Static IP connection and do not have this information, please contact your ISP. 
wwa.set.sipa.msg,인터넷에 연결하기 위해서는 가입하신 인터넷 서비스 공급자(ISP)에서 제공하는 IP 정보 리스트가 필요합니다. 고정 IP를 가지고 있으면서 연결이 이루어지지 않는 경우에는 가입하신 ISP에 확인하시기 바랍니다. 
#From:USB_LOG_STORAGE_NOT_FOUND,No WCN compatible USB mass storage interface was found 
USB_LOG_STORAGE_NOT_FOUND,WCN 호환 USB 대량 스토리지 인터페이스를 찾을 수 없습니다. 
#From:.aa.wiz.s2.title,Step 1: Choose Policy Name 
.aa.wiz.s2.title,Step 1: 정책명을 선택하십시오.
#From:GW_INIT_DONE,Device initialized 
GW_INIT_DONE,장비가 초기화되었습니다. 
#From:carriertype.ct.0,Dynamic IP 
carriertype.ct.0,유동 IP
#From:help305,These are the settings of the LAN (Local Area Network) interface for the router. The router's local network (LAN) settings are configured based on the IP Address and Subnet Mask assigned in this section. The IP address is also used to access this Web-based management interface. 
help305,These are the settings of the LAN (Local Area Network) interface for the router. The router's local network (LAN) settings are configured based on the IP Address and Subnet Mask assigned in this section. The IP address is also used to access this Web-based management interface. 
#From:tps.raw,Raw TCP Port Printing 
tps.raw,Raw TCP 포트 프린팅
#From:av.PubP,Public Port 
av.PubP,공인 포트
#From:help164,SPI ("stateful packet inspection" also known as "dynamic packet filtering") helps to prevent cyberattacks by tracking more state per session. It validates that the traffic passing through that session conforms to the protocol. 
help164,SPI ("stateful packet inspection" also known as "dynamic packet filtering") helps to prevent cyberattacks by tracking more state per session. It validates that the traffic passing through that session conforms to the protocol. 
#From:help374,WPA Mode: 
help374,WPA Mode: 
#From:PPTP_EVENT_TUNNEL_CLEAR_DOWN_REQUEST,PPTP received a tunnel clear down request from the application, the tunnel will now be closed. 
PPTP_EVENT_TUNNEL_CLEAR_DOWN_REQUEST,PPTP가 터널 종료 요청을 받았습니다. 터널을 종료합니다. 
#From:help401,Access Point 
help401,Access Point
#From:IPL2TP_SESSION_CLEAR_DOWN_REQUEST,L2TP local session 0x%04X terminating 
IPL2TP_SESSION_CLEAR_DOWN_REQUEST,L2TP 로컬 세션 0x%04X 종료
#From:YM128,Invalid Primary DNS Address 
YM128,1차 DNS 주소가 잘못 되었습니다. 
#From:GW_NAT_PORT_TRIGGER_PORT_RANGE_EMPTY_INVALID,%s of '%s' can not be empty. 
GW_NAT_PORT_TRIGGER_PORT_RANGE_EMPTY_INVALID,%s' 의 %s 를 공백으로 두지 마십시오. 
#From:aa.ACR.c2,Policy 
aa.ACR.c2,정책
#From:hhav.filt,Select a filter that restricts the Internet hosts that can access this virtual server to hosts that you trust. If you do not see the filter you need in the list of filters, go to the <a href="../Advanced/Inbound_Filter.shtml" onclick="return jump_if();"> Advanced &rarr; Inbound&nbsp;Filter</a> screen and create a new filter. 
hhav.filt,등록한 클라이언트만 가상서버(virtual server)에 접속할 수 있도록 외부에 있는 클라이언트를 제한하는 필터를 선택하십시오. 필터 리스트에 필요한 필터가 없으면, <a href="../Advanced/Inbound_Filter.shtml" onclick="return jump_if();"> 고급 -> 수신필터</a> 로 가서 새 필터를 생성하십시오.
#From:help29,The requests from the LAN machine will not be looped back if Internet access is blocked at the time of access. To work around this problem, access the LAN machine using its LAN-side identity. 
help29,The requests from the LAN machine will not be looped back if Internet access is blocked at the time of access. To work around this problem, access the LAN machine using its LAN-side identity. 
#From:up.tz.01,(GMT-11:00) Midway Island, Samoa 
up.tz.01,(GMT-11:00) Midway Island, Samoa 
#From:.app,Application 
.app,응용프로그램
#From:bln.alert.1,Invalid LAN subnet mask. 
bln.alert.1,LAN 서브넷 마스크가 잘못되었습니다.
#From:GW_WAN_RATE_ESTIMATOR_STARTED_ON_WAN,Estimating speed of WAN interface 
GW_WAN_RATE_ESTIMATOR_STARTED_ON_WAN,WAN 속도 측정
#From:sl.FWandSec,Firewall &amp; Security 
sl.FWandSec,Firewall &amp; Security 
#From:hhan.ping,For added security, it is recommended that you disable the WAN Ping Respond option. Ping is often used by malicious Internet users to locate active networks or PCs. 
hhan.ping,보안 강화를 위해, WAN Ping 응답 옵션 비활성화를 권장합니다. Ping이 때때로 악의적인 인터넷 사용자에 의해 네트워크나 PC 등의 위치를 파악하는데 사용되기도 하기 때문입니다. 
#From:sa.NAT,NAT 
sa.NAT,NAT 
#From:hhta.en,Enabling Remote Management, allows you or others to change the router configuration from a computer on the Internet. 
hhta.en,원격 관리 설정으로 외부 네트워크상에 있는 PC에서 공유기 설정을 변경할 수 있습니다. 
#From:YM177,passwords do not match, please re-enter 
YM177,비밀 번호가 맞지 않습니다. 다시 입력해 주십시오.
#From:GW_SMTP_EMAIL_FAILED_DNS,Unable to find DNS record for SMTP (Email) server %s 
GW_SMTP_EMAIL_FAILED_DNS,SMTP (Email) 서버 %s 용 DNS 레코드를 찾을 수 없습니다. 
#From:YM82,Host 1 IP Range 
YM82,Host 1 IP 범위
#From:YM119,Invalid Authentication Timeout. 
YM119,인증 타임 아웃이 잘못되었습니다. 
#From:help810,The number of packets that were dropped due to Ethernet collisions (two or more devices attempting to use an Ethernet circuit at the same time). 
help810,The number of packets that were dropped due to Ethernet collisions (two or more devices attempting to use an Ethernet circuit at the same time). 
#From:YM161,The IP address and, where appropriate, port number of the computer to which a network connection has been made. 
YM161,PC의 IP 주소와 적절한 포트로 네트워크 연결이 이루어졌습니다. 
#From:.WOL,Wake-On-LAN 
.WOL,Wake-On-LAN 
#From:GW_DHCP_SERVER_POOL_SIZE_INVALID,DHCP server pool size is too big (must be no more than 256 addresses). 
GW_DHCP_SERVER_POOL_SIZE_INVALID,DHCP 서버 범위(pool) 크기 제한을 넘었습니다.(256개의 주소 이하여야 합니다.)
#From:help272,On demand: 
help272,On demand: 
#From:help819.1,None -- This entry is used as a placeholder for a future connection that may occur. 
help819.1,None -- This entry is used as a placeholder for a future connection that may occur. 
#From:up.tz.14,(GMT-04:00) Atlantic Time (Canada) 
up.tz.14,(GMT-04:00) Atlantic Time (Canada) 
#From:.sdi.s4b,Established 
.sdi.s4b,연결되었습니다. 
#From:ZM8,DNS Lookup Authentication Server 
ZM8,DNS Lookup 인증 서버
#From:gw.vs.6,POP3 
gw.vs.6,POP3 
#From:gw.gm.51,Star Trek: Elite Force II 
gw.gm.51,Star Trek: Elite Force II 
#From:td.SvAd,Server Address 
td.SvAd,서버 주소
#From:YM129,Invalid Secondary DNS Address 
YM129,2차 DNS 주소가 잘못되었습니다.
#From:hhag.40,You can enter ports in various formats: 
hhag.40,포트를 여러 가지 방식으로 입력할 수 있습니다. :
#From:help169,Inbound Filters can be used for limiting access to a server on your network to a system or group of systems. Filter rules can be used with Virtual Server, Gaming, or Remote Administration features. Each filter can be used for several functions; for example a "Game Clan" filter might allow all of the members of a particular gaming group to play several different games for which gaming entries have been created. At the same time an "Admin" filter might only allows systems from your office network to access the WAN admin pages and an FTP server you use at home. If you add an IP address to a filter, the change is effected in all of the places where the filter is used. 
help169,Inbound Filters can be used for limiting access to a server on your network to a system or group of systems. Filter rules can be used with Virtual Server, Gaming, or Remote Administration features. Each filter can be used for several functions; for example a "Game Clan" filter might allow all of the members of a particular gaming group to play several different games for which gaming entries have been created. At the same time an "Admin" filter might only allows systems from your office network to access the WAN admin pages and an FTP server you use at home. If you add an IP address to a filter, the change is effected in all of the places where the filter is used. 
#From:help370,64-bit ASCII keys are up to 5 characters in length (DMODE is a valid string of 5 characters for 64-bit encryption.) 
help370,64-bit ASCII keys are up to 5 characters in length (DMODE is a valid string of 5 characters for 64-bit encryption.) 
#From:LY29,Locking the wireless security settings prevents the settings from being changed by any new external registrar using its PIN. Devices can still be added to the wireless network using Wi-Fi Protected Setup. It is still possible to change wireless network settings with <a href="../Basic/Wireless.shtml" shape="rect">Manual Wireless Network Setup</a>, <a href="../Basic/Wizard_WLAN.shtml" shape="rect">Wireless Network Setup Wizard</a>, or an existing external WLAN Manager Registrar. 
LY29,무선 보안 설정을 잠금 상태로 만들면 PIN 을 사용하여 다른 외부 registrar에 의해 설정이 수정 되는 것을 방지할 수 있습니다. 무선 장비들은 Wi-Fi Protected 설정을 사용해서도 연결할 수 있습니다. <a href="../Basic/Wireless.shtml" shape="rect">Manual Wireless Network Setup</a>, <a href="../Basic/Wizard_WLAN.shtml" shape="rect">Wireless Network Setup Wizard</a>, 현재 외부에 있는 WLAN Manager Registrar 설정으로 무선 네트워크를 설정할 수 있습니다. 
#From:help324,The amount of time that a computer may have an IP address before it is required to renew the lease. The lease functions just as a lease on an apartment would. The initial lease designates the amount of time before the lease expires. If the tenant wishes to retain the address when the lease is expired then a new lease is established. If the lease expires and the address is no longer needed than another tenant may use the address. 
help324,The amount of time that a computer may have an IP address before it is required to renew the lease. The lease functions just as a lease on an apartment would. The initial lease designates the amount of time before the lease expires. If the tenant wishes to retain the address when the lease is expired then a new lease is established. If the lease expires and the address is no longer needed than another tenant may use the address. 
#From:htsc.intro,"Ping" is an Internet utility function that sends a series of short messages to a target computer and reports the results. You can use it to test whether a computer is running, and to get an idea of the quality of the connection to that computer, based on the speed of the responses. 
htsc.intro,"Ping"은 목적지 PC에 연속된 메시지를 전송하고 그 결과를 받아서 연결 상태를 확인합니다. PC가 동작하고 있는지, Ping 응답 속도에 따라 커넥션의 질(Quality)을 확인할 수 있습니다. 
#From:GW_PURE_ADDPORTMAPPING_CONFLICT,HNAP AddPortMapping '%s' %v:%d<->%v:%d %S conflict with %dth virtual server entry '%s' %v:%d<->%v:%d %S 
GW_PURE_ADDPORTMAPPING_CONFLICT,HNAP AddPortMapping '%s' %v:%d<->%v:%d %S 가 %dth virtual server entry '%s' %v:%d<->%v:%d %S 와 충돌합니다. 
#From:KR4.ww,WLAN Partition 
KR4.ww,WLAN 분리
#From:GW_XML_CONFIG_WRITE_WARN,Warning while writing configuration file: %s 
GW_XML_CONFIG_WRITE_WARN,설정 파일 저장 중 주의하십시오.: %s
#From:GW_FIREWALL_NAME_INVALID,Name '%s' is already used 
GW_FIREWALL_NAME_INVALID,이름 '%s' 은 이미 있습니다. 
#From:GW_PURE_SETROUTERLANSETTINGS,HNAP SetRouterLanSettings set RouterIPAddress %v, RouterSubnetMask %v, DHCPServerEnabled %s 
GW_PURE_SETROUTERLANSETTINGS,HNAP SetRouterLanSettings 이 RouterIPAddress %v, RouterSubnetMask %v, DHCPServerEnabled %s 을 설정합니다. 
#From:help317,The computers (and other devices) connected to your LAN also need to have their TCP/IP configuration set to "DHCP" or "Obtain an IP address automatically". 
help317,The computers (and other devices) connected to your LAN also need to have their TCP/IP configuration set to "DHCP" or "Obtain an IP address automatically". 
#From:anet.multicast,Multicast Streams 
anet.multicast,멀티캐스트 스트림
#From:GW_WISH_RULES_HOST2_IP,'%s': Host 2 IP start, %v, must be less than host 2 IP end, %v 
GW_WISH_RULES_HOST2_IP,%s': Host 2  시작 IP, %v 는 반드시 host 2 의 마지막 IP, %v 보다 적어야 합니다. 
#From:help491,Digital certificate: 
help491,Digital certificate: 
#From:help819.7,Last ACK -- Waiting for a short time while a connection that was in Close Wait is fully closed. 
help819.7,Last ACK -- Waiting for a short time while a connection that was in Close Wait is fully closed. 
#From:IPL2TP_SHUTDOWN_COMPLETE,L2TP local tunnel 0x%04X RTE module has shut down. 
IPL2TP_SHUTDOWN_COMPLETE,L2TP 로컬 터널 0x%04X RTE 모듈이 중단되었습니다. 
#From:.aa.wiz.s1.title,Add New Policy 
.aa.wiz.s1.title,새 정책 추가 
#From:GW_PURE_SETWLANSECURITY,HNAP SetWLanSecurity set Enabled %s, Type %s 
GW_PURE_SETWLANSECURITY,HNAP SetWLanSecurity 이 %s 활성화, 유형 %s 을 설정하였습니다. 
#From:help809,The number of packets that were dropped while being received, due to errors, collisions, or router resource limitations. 
help809,The number of packets that were dropped while being received, due to errors, collisions, or router resource limitations. 
#From:help9,Select the Protocol (for example <code>TCP</code>). 
help9,Select the Protocol (for example <code>TCP</code>). 
#From:sl.alert.1,Are you sure you want to clear all log entries? 
sl.alert.1,로그를 모두 제거하시겠습니까?
#From:GW_LAN_CARRIER_DETECTED,LAN Ethernet Carrier Detected 
GW_LAN_CARRIER_DETECTED,LAN 이더넷 캐리어가 감지되었습니다. 
#From:TA2,Product Page 
TA2,Product Page
#From:LS314,Connect 
LS314,연결
#From:.vs.traffictype,Traffic Type 
.vs.traffictype,트래픽 종류
#From:as.TPRange.b,Trigger Port 
as.TPRange.b,트리거 포트
#From:tt.week.1,1st 
tt.week.1,1st 
#From:up.jt.3,If so, press Ok. 
up.jt.3,원하시면, 확인을 누르십시오.
#From:help448,Broadband 
help448,Broadband 
#From:GW_DYNDNS_TIMEOUT_TOO_BIG_INVALID,The timeout value cannot be greater than 8760. 
GW_DYNDNS_TIMEOUT_TOO_BIG_INVALID,타임 아웃 값은 8760를 넘을 수 없습니다. 
#From:.clear,Clear 
.clear,삭제
#From:KR51,Select this option if your wireless device supports Wi-Fi Protected Setup 
KR51,Wi-Fi Protected 설정을 지원하는 무선 장비가 있으면 이 옵션을 선택하십시오. 
#From:GW_WAN_PPTP_GATEWAY_IN_SUBNET_INVALID,PPTP Gateway IP address %v must be within the WAN subnet. 
GW_WAN_PPTP_GATEWAY_IN_SUBNET_INVALID,PPTP 게이트웨이 IP 주소 %v 는 반드시 WAN 서브넷에  있어야 합니다. 
#From:help837,Click the <span class="button_ref">Save to Windows Connect Now</span> button, and the WCN technology will capture the wireless network settings from your router and save them on your PC. 
help837,Click the <span class="button_ref">Save to Windows Connect Now</span> button, and the WCN technology will capture the wireless network settings from your router and save them on your PC.
#From:PPPOE_EVENT_DISCONNECT,Terminating PPPoE session 0x%04X 
PPPOE_EVENT_DISCONNECT,PPPoE 세션 0x%04X 종료 
#From:.sdi.staticip,Static IP 
.sdi.staticip,고정 IP
#From:KR49,Please Select Configuration Method to set up your Wireless Network 
KR49,설정 방법(Configuration Method)을 선택하여 무선 네트워크를 설정하십시오. 
#From:help566,Internet Key Exchange is used to ensure security for VPN connections 
help566,Internet Key Exchange is used to ensure security for VPN connections 
#From:help398,Help Glossary 
help398,Help Glossary 
#From:.open,Open 
.open,오픈
#From:.aa.bsecure.news,News 
.aa.bsecure.news,뉴스
#From:YM34,Update 
YM34,업데이트
#From:wwa.msg.set.dhcp,To set up this connection, please make sure that you are connected to the D-Link Router with the PC that was originally connected to your broadband connection. If you are, then click the Clone MAC button to copy your computer's MAC Address to the D-Link Router. 
wwa.msg.set.dhcp,처음에 인터넷에 연결하였던 PC가 공유기에 연결되었는지를 확인하시기 바랍니다. 맞으면, MAC 복사 버튼을 눌러 PC의 MAC 주소를 공유기에 복사하십시오. 
#From:hhts.name,Give each schedule a name that is meaningful to you. For example, a schedule for Monday through Friday from 3:00pm to 9:00pm, might be called "After School". 
hhts.name,각 스케쥴에 이름을 부여하십시오. 예, 월요일에서 금요일, 오후 3시에서 9시까지를 "방과후" 로 설정. 
#From:help825,Enter a password for the user "user", who will have read-only access to the Web-based management interface. 
help825,Enter a password for the user "user", who will have read-only access to the Web-based management interface. 
#From:WAN,WAN 
WAN,WAN 
#From:help586,Internetwork Packet Exchange is a networking protocol developed by Novel to enable their Netware clients and servers to communicate 
help586,Internetwork Packet Exchange is a networking protocol developed by Novel to enable their Netware clients and servers to communicate 
#From:hham.add,Computers that have obtained an IP address from the router's DHCP server will be in the DHCP Client List. Select a device from the drop down menu, then click the arrow to add that device's MAC address to the list. 
hham.add,공유기의 DHCP 서버에서 IP주소를 받은 PC는 DHCP 클라이언트 리스트에 나타납니다. 드랍다운 메뉴에서 장비를 선택한 후 화살표를 눌러 장비의 MAC 주소를 리스트에 추가하십시오. 
#From:.advwls,Advanced Wireless 
.advwls,고급 무선
#From:ss.WANStats,WAN Statistics 
ss.WANStats,WAN 통계
#From:GW_DHCP_SERVER_RESERVATION_DISABLED_OUT_OF_POOL_WARNING,<warn>DHCP Reservation %v has been disabled because the DHCP pool is too small.</warn> 
GW_DHCP_SERVER_RESERVATION_DISABLED_OUT_OF_POOL_WARNING,<warn>DHCP Reservation %v 이 DHCP pool 이 너무 적어서 비활성화 되었습니다. </warn>
#From:GW_MAC_FILTER_ALL_LOCKED_OUT_INVALID,MAC Filter settings will lockout all machines. This is not allowed. 
GW_MAC_FILTER_ALL_LOCKED_OUT_INVALID,MAC 필터를 설정하면 모든 장비를 잠금 상태로 만듭니다. 이것은 허용되지 않습니다. 
#From:.wepkey4,WEP Key 4 
.wepkey4,WEP Key 4 
#From:GW_WAN_CONNECT_ON_ACTIVE,Attempting to start WAN connection on-demand 
GW_WAN_CONNECT_ON_ACTIVE,on-demand WAN 연결 시도 
#From:YM98,optional 
YM98,선택가능
#From:aa.sched.conf.1,You must abandon all your changes in order to define a new schedule. 
aa.sched.conf.1,새로운 스케쥴을 지정하기 위해서는 모든 수정사항을  버리시기 바랍니다. 
#From:GW_INET_ACCESS_POLICY_END_OTHERS,Policy %s stopped; Internet access for all non-specified systems changed to: %s 
GW_INET_ACCESS_POLICY_END_OTHERS,정책 %s 이 중단되었습니다.: 지정 되지 않은 모든 시스템의 인터넷 연결이 변경되었습니다. : %s
#From:bd.title.list,DHCP Reservations List 
bd.title.list,DHCP 주소 보유 리스트
#From:.aa.bsecure.search_engine,Search Engine 
.aa.bsecure.search_engine,검색 엔진
#From:.aa.logging,Web Access Logging 
.aa.logging,웹 접속 로깅
#From:.username,User Name 
.username,사용자명
#From:KR47,WPA Only" 
KR47,WPA Only"
#From:help710,A TCP/IP protocol for transmitting streams of printer data. 
help710,A TCP/IP protocol for transmitting streams of printer data. 
#From:bws.msg.WEP.3,If you choose the WEP security option this device will <strong>ONLY</strong> operate in <strong>Legacy Wireless mode (802.11B/G)</strong>. This means you will <strong>NOT</strong> get 11N performance due to the fact that WEP is not supported by Draft 11N specification. 
bws.msg.WEP.3,WEP 보안 옵션을 선택하면 WEP 보안 옵션을 선택하면 802.11B/G(11M/54M) 모드로만 동작합니다. Draft 11N 스펙은 WEP를 지원하기 않기 때문에 Draft 11N 속도가 지원되지 않습니다.
#From:.enable,Enable 
.enable,설정
#From:GW_SMTP_LAN_ADDRESS_CONFLICT_WARNING,<warn>Email server address conflicts with router LAN address - email will be disabled.</warn> 
GW_SMTP_LAN_ADDRESS_CONFLICT_WARNING,<warn>이메일 서버가 공유기의 LAN 주소와 충돌합니다. - 이메일이 비활성화 됩니다.</warn>
#From:GW_LAN_IP_MODE_INVALID,LAN IP mode is invalid 
GW_LAN_IP_MODE_INVALID,LAN IP 모드가 잘못되었습니다.
#From:GW_TIME_FAILED_DNS,Unable to find DNS record for time server %s 
GW_TIME_FAILED_DNS,타임서버 %s 용 DNS 레코드를 찾을 수 없습니다. 
#From:GW_WAN_BIGPOND_SERVER_NOTSTD15,The specified Big Pond server is not a proper domain name or IP address. 
GW_WAN_BIGPOND_SERVER_NOTSTD15,지정된 Big Pond 서버의 도메인명과 IP 주소가 적절하지 않습니다. 
#From:ZM18,Once your router is configured the way you want it, you can save the configuration settings to a configuration file. 
ZM18,공유기 설정이 제대로 되었으면, 바로 설정 값을 설정 파일에 저장할 수 있습니다. 
#From:wprn.tt1,Refer to the documentation that came with your router for printer setup instructions specific to your operating system. 
wprn.tt1,사용하고 계신 운영체제(OS)에 맞는 프린터 설정을 위해 공유기 박스에 들어 있는 문서를 참조하십시오. 
#From:tt.time.22,9 pm 
tt.time.22,9 pm 
#From:help256,IP address 
help256,IP address 
#From:GW_INET_ACCESS_INITIAL_IP_FAIL,Internet access policy for IP address %v cannot be set 
GW_INET_ACCESS_INITIAL_IP_FAIL,IP 주소 %v 의 인터넷 접속 정책을 설정 할 수 없습니다. 
#From:.aa.details,Details 
.aa.details,상세 정보
#From:GW_WLAN_FRAGMENT_THRESHOLD_INVALID,Fragmentation threshold should be between 256 and 2346. 
GW_WLAN_FRAGMENT_THRESHOLD_INVALID,프레그멘테이션 설정 값은 256 ~ 2346  입니다. 
#From:help36,Allows applications that use Real Time Streaming Protocol to receive streaming media from the internet. QuickTime and Real Player are some of the common applications using this protocol. 
help36,Allows applications that use Real Time Streaming Protocol to receive streaming media from the internet. QuickTime and Real Player are some of the common applications using this protocol. 
#From:help817,The port number of the LAN-side application as viewed by the WAN-side application. 
help817,The port number of the LAN-side application as viewed by the WAN-side application. 
#From:bwn.Mode.PPPoE,PPPoE (Username / Password) 
bwn.Mode.PPPoE,PPPoE (사용자명 / 비밀번호)
#From:help686,Simple Mail Transfer Protocol 
help686,Simple Mail Transfer Protocol 
#From:.allowall,Allow All 
.allowall,모두 허용
#From:GW_LAN_DOMAIN_NAME_INVALID,Domain name given is invalid 
GW_LAN_DOMAIN_NAME_INVALID,설정한 도메인명이 잘못되었습니다. 
#From:awf.clearlist,Clear the list below... 
awf.clearlist,리스트 모두 삭제
#From:help547,Characters 0-9 and A-F 
help547,Characters 0-9 and A-F 
#From:.wifisc.overlap,Session Overlap Detected 
.wifisc.overlap,세션 중첩이 감지되었습니다. 
#From:sc.intro.rb3,The router must be rebooted before settings saved on a previous page will take effect. You can reboot the router now using the 'Reboot' button below, or press the 'Continue' button and make other changes. 
sc.intro.rb3,이전 페이지에서 저장한 설정이 유효하기 위해서는 공유기를 반드시 다시 시작(reboot)해 주셔야 합니다. 아래에 있는 '재시작' 버튼을 누르거나 또는 '연결' 버튼을 눌러 장비를 다시 시작하고 다른 사항을 수정할 수 있습니다.
#From:LW62,The wizard will either display the wireless network settings to guide you through manual configuration, prompt you to enter the PIN for the device, or ask you to press the configuration button on the device. If the device supports Wi-Fi Protected Setup and has a configuration button, you can add it to the network by pressing the configuration button on the device and then the on the router within 60 seconds. The status LED on the router will flash three times if the device has been successfully added to the network. 
LW62,설정 마법사를 사용하여 무선 네트워크를 직접 설정할 수 있도록 안내해 드립니다. 장비가 Wi-Fi Protected 설정을 지원하고 설정 버튼이 있는 경우에 장비에 있는 설정 버튼을 눌러 네트워크에 추가할 수 있습니다.  장비가 성공적으로 네트워크에 추가되면 공유기의 LED 상태창이 3번 깜빡거립니다. 
#From:KR23,Process stopped. You can click on the Cancel button below to return to the beginning of the wizard page and restart the process 
KR23,프로세스가 중단되엇습니다. 아래에 있는 취소 버튼을 눌러 마법사 페이지로 돌아가신 후 해당 프로세스를 다시 시작하십시오.
#From:help67,TCP Ports To Open 
help67,TCP Ports To Open 
#From:help537,Transmission technology that provides a data rate of 1 billion bits per second 
help537,Transmission technology that provides a data rate of 1 billion bits per second 
#From:.aa.bsecure.pornography,Pornography 
.aa.bsecure.pornography,성인사이트
#From:gw.gm.37,Quake 2 
gw.gm.37,Quake 2 
#From:up.ae.wic.3,Otherwise press 'Cancel'. 
up.ae.wic.3,해당 되지 않으면 '취소' 버튼을 누르십시오. 
#From:wwa.title.s1,Step 1: Set your Password 
wwa.title.s1,Step 1: 비밀번호 설정
#From:tt.CopyTime,Copy Your Computer's Time Settings 
tt.CopyTime,PC 의 시간 설정 복사 
#From:tps.drname,Driver Name 
tps.drname,드라이버 명
#From:GW_NAT_NAME_INVALID,Name can not be empty string. 
GW_NAT_NAME_INVALID,드라이버명을 공백으로 두어서는 안됩니다. 
#From:bwl.NSS,Number of Spatial Streams 
bwl.NSS,Spatial Stream 수
#From:IPL2TP_SEQUENCING_ACTIVATED,L2TP session server started sending sequencing numbers for local session 0x%04X 
IPL2TP_SEQUENCING_ACTIVATED,L2TP 세션 서버가 로컬 세션 0x%04X 를 위한 연속된 수 전송을 시작하였습니다. 
#From:bd.Reserve,Reserve 
bd.Reserve,보유(Reserve)
#From:IPMSNMESSENGERALG_REJECTED_PACKET,MSN Messenger ALG rejected packet from %v:%u to %v:%u 
IPMSNMESSENGERALG_REJECTED_PACKET,MSN 메신저 ALG가 %v:%u 에서 %v:%u 로의 패킷을 거부하였습니다. 
#From:help782,The wireless section allows you to view the wireless clients that are connected to your wireless router. 
help782,The wireless section allows you to view the wireless clients that are connected to your wireless router. 
#From:YM108,Invalid PPTP server IP address 
YM108,PPTP 서버의 IP 주소가 잘못되었습니다. 
#From:gw.gm.16,Dungeon Siege 
gw.gm.16,Dungeon Siege 
#From:IPPORTFORWARDALG_UDP_PACKET_ALLOC_FAILURE,Port forwarding ALG failed to allocate session for UDP packet from %v:%u to %v:%u 
IPPORTFORWARDALG_UDP_PACKET_ALLOC_FAILURE,포트 포워딩 ALG가 %v:%u 에서 %v:%u 로의 UDP 패킷 세션 할당에 실패하였습니다. 
#From:wprn.mod,Model 
wprn.mod,Model 
#From:YM19,Destination IP End address should not be in LAN subnet 
YM19,목적지 마지막 IP 주소는 LAN 서브넷에 있어서는 안됩니다. 
#From:help119,Note: 
help119,주의: 
#From:WIFISC_AP_PROXY_PROCESS_COMPLETE,STA with MAC (%m) registered in 
WIFISC_AP_PROXY_PROCESS_COMPLETE,주소가 MAC (%m) 인 단말장치가 등록되었습니다. 
#From:gw.gm.46,Silent Hunter II 
gw.gm.46,Silent Hunter II 
#From:am.FM.3,Turn MAC Filtering ON and ALLOW computers listed to access the network 
am.FM.3,MAC 필터링 ALLOW 옵션으로 PC들의 네트워크 접속 허용
#From:sps.lpd1,Use this information to configure your computer for LPD/LPR printing. 
sps.lpd1,LPD/LPR 인쇄 설정을 위해 정보를 사용하십시오. 
#From:tss.SysSt,System Settings 
tss.SysSt,시스템 설정
#From:ta.ResConf,Restore Configuration from File 
ta.ResConf,파일에서 설정 복구
#From:WCN_LOG_SAVE,Updated flash to wireless configuration 
WCN_LOG_SAVE,무선 설정이 플래쉬 메모리에 업데이트 되었습니다. 
#From:help823.11,UDP connections. 
help823.11,UDP connections.
#From:as.FPrt,Firewall Traffic Type 
as.FPrt,방화벽 트래픽 종류
#From:tsc.EvDay,Every Day 
tsc.EvDay,매일
#From:ham.del,Click the <span class="button_ref">Clear</span> button to remove the MAC address from the MAC Filtering list. 
ham.del,<span class="button_ref">Clear</span> 버튼을 눌러 MAC 필터링 리스트에서 MAC 주소를 삭제하십시오.  
#From:.PPPoE,PPPoE 
.PPPoE,PPPoE 
#From:wwa.intro.online1,It appears that you have already successfully connected your new router to the Internet. 
wwa.intro.online1,새로운 공유기로 인터넷에 성공적으로 연결되었습니다. 
#From:tt.dstend,DST End
tt.dstend,DST 마침
#From:GW_NAT_ENTRY_DUPLICATED_INVALID,Record '%s' is duplicate of '%s'. 
GW_NAT_ENTRY_DUPLICATED_INVALID,레코드 '%s' 와 '%s' 가 중복입니다. 
#From:tsc.SchRu,Schedule Rule 
tsc.SchRu,스케쥴 규칙
#From:aa.alert.9,The Policy Name cannot be blank. 
aa.alert.9,정책 명을 공백으로 두지 마십시오. 
#From:help654,PPP 
help654,PPP 
#From:GW_AUTH_FAILED,Failed configuration authentication attempt by IP address %v 
GW_AUTH_FAILED,IP 주소 %v 가 시도한 설정 인증시도가 실패하였습니다. 
#From:.scheds,Schedules 
.scheds,스케쥴
#From:GW_NAT_PORT_FORWARD_CONFLICT_INVALID,'%s' [%s:%s] conflicts with '%s'[%s:%s] on different IP Addresses. 
GW_NAT_PORT_FORWARD_CONFLICT_INVALID,다른 IP 주소 상에서 '%s' [%s:%s] 와 '%s'[%s:%s] 이 충돌합니다. 
#From:LW27,If you would like to utilize our easy to use Web-based Wizards to assist you in connecting your new D-Link Systems Router to the Internet, click on the button below. 
LW27,사용하기 쉬운 웹기반 마법사를 사용하시려면 아래 버튼을 누르십시오. 
#From:up.tz.56,(GMT+08:00) Irkutsk, Ulaan Bataar 
up.tz.56,(GMT+08:00) Irkutsk, Ulaan Bataar 
#From:YM38,Are you sure you want to update 
YM38,업데이트 하시겠습니까?
#From:YM185,NTP Server is not configured. 
YM185,NTP 서버가 설정 되지 않았습니다. 
#From:help708,Transmission Control Protocol/Internet Protocol 
help708,Transmission Control Protocol/Internet Protocol 
#From:LY2,Wi-Fi Protected Setup 
LY2,Wi-Fi Protected 설정
#From:.dns2,Secondary DNS Server 
.dns2,2차 DNS 서버
#From:tsc.pingt.msg2,You must enter a host name or IP address. 
tsc.pingt.msg2,호스트 명 또는 IP 주소를 입력하셔야 합니다. 
#From:KR30,PIN (2nd half) Mismatch Detected 
KR30,PIN (2nd half) 이 맞지 않습니다. 
#From:tps.apc1,These settings are automatically configured and should be modified only by advanced users. 
tps.apc1,이 설정들은 자동으로 구성되었고 관리자 계정만이 수정할 수 있습니다. 
#From:help287,Time interval the machine can be idle before the L2TP connection is disconnected. The Maximum Idle Time value is used for the "On demand" and "Manual" reconnect modes. 
help287,Time interval the machine can be idle before the L2TP connection is disconnected. The Maximum Idle Time value is used for the "On demand" and "Manual" reconnect modes. 
#From:up.tz.48,(GMT+05:45) Kathmandu 
up.tz.48,(GMT+05:45) Kathmandu 
#From:.password_admin,Admin Password 
.password_admin,관리자 비밀번호 
#From:bd.intro.,Use this section to configure the built-in DHCP Server to assign IP addresses to the computers on your network. 
bd.intro.,내장된 DHCP 서버를 설정하여 네트워크에 연결되어 있는 PC 들에게 IP 주소를 할당할 수 있습니다. 
#From:help387,RADIUS Server IP Address: 
help387,RADIUS Server IP Address: 
#From:KR31,Session Over 
KR31,세션 종료
#From:GW_AUTH_SUCCEEDED,Allowed configuration authentication by IP address %v 
GW_AUTH_SUCCEEDED,IP 주소 %v 에 의한 설정 인증이 허용 되었습니다. 
#From:.init_fail,Init failed 
.init_fail,초기화 실패 
#From:.bsecure.parental.blurb,The Parental Controls service is a simple yet effective way to limit access to offensive, illegal or hateful web sites. This service covers all PC's or Apple Computers behind your router and is always automatically updated in real time. (No need for you to download or manually input sites.) This service is fast and will not slow down your network. 
.bsecure.parental.blurb,자녀 보호 서비스는 단순하지만 효과적인 방법으로 공격적이고 불법적이거나 혐오스러운 웹 사이트를 제한합니다. 이 서비스는 공유기에 연결 되어 있는 모든 종류의 PC나 애플 컴퓨터에서 실시간으로 자동 업데이트가 이루어집니다.(다운로드 받거나 직접 사이트를 입력할 필요 없음.) 이 서비스는 아주 신속해서 네트워크 속도에 영햐을 주지 않습니다. 
#From:IPPPPCHAP_AUTH_SENT,CHAP Authentication details sent to peer. 
IPPPPCHAP_AUTH_SENT,상세 CHAP 인증이 peer 로 전송되었습니다. 
#From:help424,American Standard Code for Information Interchange. This system of characters is most commonly used for text files 
help424,American Standard Code for Information Interchange. This system of characters is most commonly used for text files 
#From:.aa.wiz.s1.msg,This wizard will guide you through the following steps to add a new policy for Access Control. 
.aa.wiz.s1.msg,마법사를 사용하여 새로운 액세스 제어 정책을 추가하십시오.
#From:YM68,source starting port should be between 0 and 65535 inclusive. 
YM68,출발지 시작 포트는 0 ~ 65535 입니다.(65535 포함)
#From:sd.macaddr,MAC Address 
sd.macaddr,MAC 주소
#From:help807,The number of packets received by the router. 
help807,The number of packets received by the router. 
#From:up.tz.61,(GMT+09:00) Seoul 
up.tz.61,(GMT+09:00) Seoul 
#From:KR12,WAN Port Mode 
KR12,WAN 포트 종류
#From:.L2TPgw,L2TP Gateway IP Address 
.L2TPgw,L2TP 게이트웨이 IP 주소
#From:help366,A method of encrypting data for wireless communication intended to provide the same level of privacy as a wired network. WEP is not as secure as WPA encryption. To gain access to a WEP network, you must know the key. The key is a string of characters that you create. When using WEP, you must determine the level of encryption. The type of encryption determines the key length. 128-bit encryption requires a longer key than 64-bit encryption. Keys are defined by entering in a string in HEX (hexadecimal - using characters 0-9, A-F) or ASCII (American Standard Code for Information Interchange - alphanumeric characters) format. ASCII format is provided so you can enter a string that is easier to remember. The ASCII string is converted to HEX for use over the network. Four keys can be defined so that you can change keys easily. A default key is selected for use on the network. 
help366,A method of encrypting data for wireless communication intended to provide the same level of privacy as a wired network. WEP is not as secure as WPA encryption. To gain access to a WEP network, you must know the key. The key is a string of characters that you create. When using WEP, you must determine the level of encryption. The type of encryption determines the key length. 128-bit encryption requires a longer key than 64-bit encryption. Keys are defined by entering in a string in HEX (hexadecimal - using characters 0-9, A-F) or ASCII (American Standard Code for Information Interchange - alphanumeric characters) format. ASCII format is provided so you can enter a string that is easier to remember. The ASCII string is converted to HEX for use over the network. Four keys can be defined so that you can change keys easily. A default key is selected for use on the network. 
#From:help395,Advanced: 
help395,Advanced: 
#From:help880,Once you have found the file to be used, click the <span class="button_ref">Upload</span> button below to start the firmware upgrade process. This can take a minute or more. 
help880,Once you have found the file to be used, click the <span class="button_ref">Upload</span> button below to start the firmware upgrade process. This can take a minute or more. 
#From:WIFISC_AP_REGISTRATION_COMPLETE,AP registered to Registrar (%s) through %s 
WIFISC_AP_REGISTRATION_COMPLETE,AP 가 %s 를 통하여 Registrar (%s) 에 등록되었습니다. 
#From:aw.TPC,TPC Max Gain 
aw.TPC,TPC 최대 이득
#From:gw.gm.29,Medal of Honor: Games 
gw.gm.29,Medal of Honor: 게임
#From:help95,The rule applies to a flow of messages whose WAN-side IP address falls within the range set here. 
help95,The rule applies to a flow of messages whose WAN-side IP address falls within the range set here. 
#From:aw.WDSMAC,WDS AP MAC Address 
aw.WDSMAC,WDS AP MAC 주소
#From:aw.BP,Beacon Period 
aw.BP,비컨(beacon) 주기
#From:YM62,Remote end port should be between 0 and 65535 inclusive. 
YM62,원격지 마지막 포트는  0 ~ 65535입니다.(65535 포함) 
#From:aw.erpe.h,Extra protection for neighboring 11b wireless networks. Turn this option off to reduce the adverse effect of legacy wireless networks on 802.11ng performance. 
aw.erpe.h,주위의 무선 네트워크 보호를 위해 이 옵션을 비활성화하여 802.11ng 성능에 나쁜 영향을 주는 요소를 줄이십시오. 
#From:GW_WAN_SERVICES_STOPPED,Stopping WAN Services 
GW_WAN_SERVICES_STOPPED,WAN 서비스 중지 
#From:GW_WAN_RECONNECT_MODE_INVALID,Invalid reconnect mode 
GW_WAN_RECONNECT_MODE_INVALID,다시 연결 시도한 모드가 잘못되었습니다. 
#From:gw.gm.79,TeamSpeak 
gw.gm.79,TeamSpeak 
#From:WIFISC_AP_DEL_APSETTINGS_COMPLETE,DelAPSettings by (%s) complete 
WIFISC_AP_DEL_APSETTINGS_COMPLETE,(%s) 에 의한 DelAPSettings  설정 완료
#From:ss.intro.user,Only Administrator can clear the statistics. The Clear Statistics button is disabled as you are not currently logged in as Administrator. 
ss.intro.user,관리자만이 통계 값들을 지울 수 있습니다.  현재 관리자로 로긴하지 않았으면, Clear Statics 버튼이 비활성화 되어 있습니다. 
#From:LW33,If you are new to networking and have never configured a router before, click on <strong>Internet Connection Setup Wizard</strong> and the router will guide you through a few simple steps to get your network up and running. 
LW33,공유기를 처음 설정해 보시는 분이거나, 네트워크에 익숙하지 않으면, 설치 전에  <strong>인터넷 연결 설정 마법사</strong> 로 쉽게 설치하실 수 있습니다. 
#From:KR27,Succeeded. To add another device click on the Cancel button below or click on the Wireless Status button to check wireless status. 
KR27,성공.  아래에 있는 취소 버튼을 눌러 다른 장비를 추가하거나 무선 상태 버튼을 눌러 무선 상태를 확인합니다. 
#From:YM138,Controls endpoint filtering for packets of the UDP protocol. 
YM138,UDP 프로토콜 패킷의 엔드포인트 필터링 제어 
#From:ta.RAIF,Remote Admin <a href="../Advanced/Inbound_Filter.shtml" onclick="return jump_if();">Inbound Filter</a> 
ta.RAIF,원격 관리 <a href="../Advanced/Inbound_Filter.shtml" onclick="return jump_if();">Inbound Filter</a>
#From:help850,Select a Network Time Server for synchronization. You can type in the address of a time server or select one from the list. If you have trouble using one server, select another. 
help850,Select a Network Time Server for synchronization. You can type in the address of a time server or select one from the list. If you have trouble using one server, select another. 
#From:help505,Duplex 
help505,Duplex 
#From:help4,You are hosting a Web Server on a PC that has LAN IP Address of 192.168.0.50 and your ISP is blocking Port 80. 
help4,You are hosting a Web Server on a PC that has LAN IP Address of 192.168.0.50 and your ISP is blocking Port 80. 
#From:up.tz.18,(GMT-03:00) Brazilia 
up.tz.18,(GMT-03:00) Brazilia 
#From:help168a,When you use the Virtual Server, Port Forwarding, or Remote Administration features to open specific ports to traffic from the Internet, you could be increasing the exposure of your LAN to cyberattacks from the Internet. 
help168a,When you use the Virtual Server, Port Forwarding, or Remote Administration features to open specific ports to traffic from the Internet, you could be increasing the exposure of your LAN to cyberattacks from the Internet. 
#From:help583,A 32-bit number, when talking about Internet Protocol Version 4, that identifies each computer that transmits data on the Internet or on an Intranet 
help583,A 32-bit number, when talking about Internet Protocol Version 4, that identifies each computer that transmits data on the Internet or on an Intranet 
#From:PPTP_ALG_REJECTED_PACKET,PPTP ALG rejected packet from %v:%u to %v:%u 
PPTP_ALG_REJECTED_PACKET,PPTP ALG가 %v:%u 에서 %v:%u 로의 패킷을 거부하였습니다. 
#From:te.SMTPSv,SMTP Server Address 
te.SMTPSv,SMTP 서버 주소
#From:help334,A MAC address is usually located on a sticker on the bottom of a network device. The MAC address is comprised of twelve digits. Each pair of hexadecimal digits are usually separated by dashes or colons such as 00-0D-88-11-22-33 or 00:0D:88:11:22:33. If your network device is a computer and the network card is already located inside the computer, you can connect to the D-Link router from the computer and click the <span class="button_ref">Copy Your PC's MAC Address</span> button to enter the MAC address. 
help334,A MAC address is usually located on a sticker on the bottom of a network device. The MAC address is comprised of twelve digits. Each pair of hexadecimal digits are usually separated by dashes or colons such as 00-0D-88-11-22-33 or 00:0D:88:11:22:33. If your network device is a computer and the network card is already located inside the computer, you can connect to the D-Link router from the computer and click the <span class="button_ref">Copy Your PC's MAC Address</span> button to enter the MAC address. 
#From:IPL2TP_LOW_RESOURCES,L2TP local tunnel 0x%04X RTE module is low on resources. 
IPL2TP_LOW_RESOURCES,L2TP 로컬 터널 0x%04X RTE 모듈 리소스가 낮습니다. 
#From:gw.gm.84,Battlefield 2 
gw.gm.84,Battlefield 2 
#From:hhac.add,Click <strong>Add Policy</strong> to start the processes of creating a rule. You can cancel the process at any time. When you are finished creating a rule it will be added to the <strong>Policy Table</strong> below. 
hhac.add,<strong>Add Policy</strong> 눌러 새로운 규칙을 생성하십시오. 진행중 언제라도 프로세스를 삭제할 수 있습니다. 규칙 생성이 끝나면,  아래의 <strong>Policy Table</strong>에 추가 될 것입니다. 
#From:as.RTSP,RTSP 
as.RTSP,RTSP 
#From:anet.wp.auto2,Auto 10/100Mbps 
anet.wp.auto2,10/100Mbps 자동
#From:.authsecmodel,Authentication &amp; Security 
.authsecmodel,인증 &amp; 보안
#From:bwn.MTU,MTU 
bwn.MTU,MTU 
#From:gw.gm.72,Steam 
gw.gm.72,Steam 
#From:.WAN,WAN 
.WAN,WAN 
#From:help10,Ensure the schedule is set to <code>Always</code> 
help10,Ensure the schedule is set to <code>Always</code> 
#From:help430,Backward Compatible 
help430,Backward Compatible 
#From:help484,Decrypt 
help484,Decrypt 
#From:GW_NAT_VS_PORT_CONFLICT_INVALID,'%s' [%s:%d]->%v/%d conflicts with '%s' [%s:%d]->%v:%d. 
GW_NAT_VS_PORT_CONFLICT_INVALID,%s' [%s:%d]->%v/%d 와 '%s' [%s:%d]->%v:%d 충돌합니다. 
#From:gw.gm.8,Command and Conquer Generals 
gw.gm.8,Command and Conquer Generals 
#From:.WPA,WPA 
.WPA,WPA 
#From:help454,Cable modem 
help454,Cable modem 
#From:help897,Re-type the password or key provided by your service provider. If the Dynamic DNS provider supplies only a key, enter that key in all three fields. 
help897,Re-type the password or key provided by your service provider. If the Dynamic DNS provider supplies only a key, enter that key in all three fields. 
#From:help180,This setting should remain at its default value of 2346 bytes. 
help180,This setting should remain at its default value of 2346 bytes. 
#From:tsc.pingt.msg7,Response from 
tsc.pingt.msg7,로부터의 응답
#From:bd.NETBIOS_WINS.1,Primary WINS Server IP address 
bd.NETBIOS_WINS.1,1차 WINS 서버 IP 주소
#From:tt.Jan,Jan 
tt.Jan,Jan 
#From:.aa.wiz.s6.title,Step 5: Sentinel Categories
.aa.wiz.s6.title,Step 5: 보호(Sentinel) 카테고리
#From:gw.gm.5,Battlefield: Vietnam 
gw.gm.5,Battlefield: Vietnam 
#From:.adwwls,Advanced Wireless 
.adwwls,고급 무선설정 
#From:tsc.pingt.msg100,Pings sent: 
tsc.pingt.msg100,Ping 전송 :
#From:gw.gm.55,Unreal 
gw.gm.55,Unreal 
#From:wwa.intro.s1,By default, your new D-Link Router does not have a password configured for administrator access to the Web-based configuration pages. To secure your new networking device, please set and verify a password below: 
wwa.intro.s1,디폴트로는 웹기반 설정을 위한  관리자용 비밀 번호가 설정되어 있지 않습니다. 보안을 위해 아래에 비밀번호를 설정하고 확인하십시오.   
#From:help556,Hub 
help556,Hub 
#From:YM77,WISH Rules 
YM77,WISH 규칙
#From:YM48,QoS Engine 
YM48,QoS 엔진
#From:anet.wan.ping,WAN Ping 
anet.wan.ping,WAN Ping
#From:bws.RMAA,MAC Address Authentication 
bws.RMAA,MAC 주소 인증
#From:aa.wiz.s1.msg2,Step 2 - Select a schedule 
aa.wiz.s1.msg2,Step 2 - 스케쥴 선택
#From:help470,Data-Link layer 
help470,Data-Link layer 
#From:YM89,Invalid Reservation IP Address 
YM89,DHCP 보유 IP 주소가 잘못 되었습니다. 
#From:tt.time.7,6 am 
tt.time.7,6 am 
#From:help822a,Initiated from WAN to LAN. 
help822a,Initiated from WAN to LAN. 
#From:gw.gm.1,America's Army 
gw.gm.1,America's Army 
#From:GW_WLAN_WPA_PSK_HEX_STRING_INVALID,Pre-Shared Key should be all HEX chars if length is 64. 
GW_WLAN_WPA_PSK_HEX_STRING_INVALID,Pre-Shared Key 길이가 64 자리 이면 모두 HEX 로 설정하십시오. 
#From:KR110,Message 
KR110,메시지
#From:up.tz.37,(GMT+03:00) Baghdad 
up.tz.37,(GMT+03:00) Baghdad 
#From:bws.SM,Security Mode 
bws.SM,보안 모드
#From:GW_WAN_WAN_IP_ADDRESS_INVALID,Invalid WAN IP address: %v 
GW_WAN_WAN_IP_ADDRESS_INVALID,WAN IP 주소: %v 가 잘못되었습니다. 
#From:LS4,Do you want to abandon all changes you made to this page? 
LS4,이 페이지에서 하신 설정을 모두 지우시겠습니까? 
#From:help689,Governs the management and monitoring of network devices 
help689,Governs the management and monitoring of network devices 
#From:help464,Cookie 
help464,Cookie 
#From:help461,A program or user that requests data from a server 
help461,A program or user that requests data from a server 
#From:KR98,The specified Dynamic DNS Service Provider is not supported. 
KR98,지정한 Dynamic DNS 서비스 공급자는 지원되지 않습니다. 
#From:YM148,Background (least urgent). 
YM148,Background (least urgent). 
#From:up.tz.68,(GMT+10:00) Hobart 
up.tz.68,(GMT+10:00) Hobart 
#From:bws.WPAM.2,Auto (WPA or WPA2) 
bws.WPAM.2,자동 (WPA or WPA2)
#From:wwl.s4.intro.za3,- Exactly 64 characters using 0-9 and A-F 
wwl.s4.intro.za3,0-9 와 A-F 를 사용하여 정확하게 64 문자 사용
#From:GW_PURE_SETDEVICESETTINGS,HNAP SetDeviceSettings changed DeviceName to '%s' 
GW_PURE_SETDEVICESETTINGS,HNAP SetDeviceSettings 를 DeviceName '%s' 로 수정하였습니다. 
#From:bwl.EW,Enable Wireless 
bwl.EW,무선 활성화
#From:wprn.foo1,The Printer Setup Wizard requires the raw TCP port printing protocol. This protocol is currently disabled on your router. 
wprn.foo1,프린터 설정 마법사는 raw TCP 포트 프린팅 프로토콜이 반드시 필요합니다. 현재 공유기에는 이 프로토콜이 비활성화되어 있습니다. 
#From:help355,A wireless network uses specific channels in the wireless spectrum to handle communication between clients. Some channels in your area may have interference from other electronic devices. Choose the clearest channel to help optimize the performance and coverage of your wireless network. 
help355,A wireless network uses specific channels in the wireless spectrum to handle communication between clients. Some channels in your area may have interference from other electronic devices. Choose the clearest channel to help optimize the performance and coverage of your wireless network. 
#From:help877a,If you would like to be notified when new firmware is released, place a checkmark in the box next to <span class="option">Email Notification of Newer Firmware Version</span>. 
help877a,If you would like to be notified when new firmware is released, place a checkmark in the box next to <span class="option">Email Notification of Newer Firmware Version</span>. 
#From:KR56,Add/Update 
KR56,추가/업데이트
#From:.rssi,Signal 
.rssi,신호
#From:aa.ACR.c6,Logged 
aa.ACR.c6,웹 접근 로깅 
#From:bws.2RSSS,Second RADIUS server Shared Secret 
bws.2RSSS,2차 RADIUS 서버 Shared Secret
#From:help391,RADIUS Server Shared Secret: 
help391,RADIUS Server Shared Secret: 
#From:help635,NTP 
help635,NTP 
#From:LS424,Hostname 
LS424,호스트명 
#From:help715,Traceroute 
help715,트레이스루트
#From:.PM,PM 
.PM,PM 
#From:help622,Network Address Translation allows many private IP addresses to connect to the Internet, or another network, through one IP address 
help622,Network Address Translation allows many private IP addresses to connect to the Internet, or another network, through one IP address 
#From:wwl.intro.wel,This wizard will guide you through a step-by-step process to set up your wireless network and make it secure. 
wwl.intro.wel,마법사를 사용하여 단계별 프로세스로 무선 네트워크와 무선 보안을 설정합니다. 
#From:help174,Define the ranges of Internet addresses this rule applies to. For a single IP address, enter the same address in both the <span class="option">Start</span> and <span class="option">End</span> boxes. Up to eight ranges can be entered. The <span class="option">Enable</span> checkbox allows you to turn on or off specific entries in the list of ranges. 
help174,Define the ranges of Internet addresses this rule applies to. For a single IP address, enter the same address in both the <span class="option">Start</span> and <span class="option">End</span> boxes. Up to eight ranges can be entered. The <span class="option">Enable</span> checkbox allows you to turn on or off specific entries in the list of ranges. 
#From:GW_DHCPSERVER_DECLINED,The DHCP server address %v was declined by the network device - check your network for IP Address conflicts. 
GW_DHCPSERVER_DECLINED,네트워크 장비에 의해 DHCP 서버 주소 %v 가 거부 되었습니다. - 네트워크 상에 IP 주소 충돌을 확인하십시오. 
#From:PPPOE_EVENT_DISCOVERY_TIMEOUT,PPPoE timed out waiting for connection. Connection attempt failed. 
PPPOE_EVENT_DISCOVERY_TIMEOUT,PPPoE 연결이 타임아웃 되었습니다.  연결 시도에 실패하였습니다. 
#From:WCN_LOG_NO_WSETTING,Device %s, wsetting.wfc: file not found 
WCN_LOG_NO_WSETTING,장비 %s, wsetting.wfc: 파일이 없습니다. 
#From:help731,Virtual Private Network 
help731,Virtual Private Network 
#From:GW_SCHEDULES_DAY_INVALID,No day is selected 
GW_SCHEDULES_DAY_INVALID,요일이 선택되지 않았습니다. 
#From:GW_NAT_UDP,UDP 
GW_NAT_UDP,UDP 
#From:haar.p,Parameters for an Application Rule 
haar.p,응용프로그램 규칙 변수 
#From:anet.wan.ping.2,If you leave this option unchecked, you are causing the router to ignore <code>ping</code> commands for the public WAN IP address of the router. 
anet.wan.ping.2,이 옵션을 체크하지 않으면, 공유기 WAN 쪽의 공인 IP 주소로 <code>ping</code> 명령에 응답하지 않습니다. 
#From:help878,To upgrade the firmware, follow these steps: 
help878,To upgrade the firmware, follow these steps: 
#From:IPSMTPCLIENT_CANNOT_CREATE_CONNECTION,Unable to create connection to email server 
IPSMTPCLIENT_CANNOT_CREATE_CONNECTION,이메일 서버로 연결할 수 없습니다. 
#From:LOGGED,, Logged 
LOGGED,, Logged 
#From:help408,ARP. Used to map MAC addresses to IP addresses so that conversions can be made in both directions. 
help408,ARP. Used to map MAC addresses to IP addresses so that conversions can be made in both directions. 
#From:bwn.RM.2,Manual 
bwn.RM.2,수동 
#From:tf.ClickDL,Click here to access firmware online. 
tf.ClickDL,온라인에서 펌웨어에 접속하려면 여기를 누르십시오. 
#From:.aa.check.all,Check All 
.aa.check.all,모두 체크
#From:bws.RSSs,RADIUS server Shared Secret 
bws.RSSs,RADIUS server Shared Secret
#From:up.tz.43,(GMT+04:00) Baku, Tbilisi, Yerevan 
up.tz.43,(GMT+04:00) Baku, Tbilisi, Yerevan 
#From:YM94,Do you want to abandon changes you made to the reservation entry? 
YM94,DHCP 보유 엔트리에서 만든 설정을 모두 취소하시겠습니까? 
#From:IPRTSPALG_REJECTED_PACKET,RTSP ALG rejected packet from %v:%u to %v:%u 
IPRTSPALG_REJECTED_PACKET,RTSP ALG가 %v:%u 에서 %v:%u 로의 패킷을 거부하였습니다. 
#From:help1,Advanced Help 
help1,Advanced Help 
#From:help688,Simple Network Management Protocol 
help688,Simple Network Management Protocol 
#From:gw.gm.73,MSN Game Zone 
gw.gm.73,MSN 게임 존
#From:hhtsn.intro,Clicking any of these links or buttons will take you to another web site for further information. 
hhtsn.intro,어떤 링크나 버튼을 클릭하여도 다른 웹사이트로 이동하여 더 자세한 정보를 확인할 수 있습니다. 
#From:tsc.pingr,Ping Result 
tsc.pingr,Ping 결과
#From:at.UpSp,Manual Uplink Speed 
at.UpSp,수동 업링크 속도
#From:help165,DMZ means "Demilitarized Zone." If an application has trouble working from behind the router, you can expose one computer to the Internet and run the application on that computer. 
help165,DMZ means "Demilitarized Zone." If an application has trouble working from behind the router, you can expose one computer to the Internet and run the application on that computer. 
#From:help465,Information that is stored on the hard drive of your computer that holds your preferences to the site that gave your computer the cookie 
help465,Information that is stored on the hard drive of your computer that holds your preferences to the site that gave your computer the cookie 
#From:LS312,Renew 
LS312,갱신
#From:help703,Subnet mask 
help703,서브넷 마스크
#From:help697,SSH 
help697,SSH 
#From:aa.wiz.s1.msg6,Step 6 - Configure Web Access Logging 
aa.wiz.s1.msg6,Step 6 - 웹 액세스 로깅 설정
#From:.PPTPip,PPTP IP Address 
.PPTPip,PPTP IP 주소
#From:help799,Click this button after changing Log Options to make them effective and permanent. 
help799,Click this button after changing Log Options to make them effective and permanent. 
#From:help185,A DTIM is a countdown informing clients of the next window for listening to broadcast and multicast messages. When the wireless router has buffered broadcast or multicast messages for associated clients, it sends the next DTIM with a DTIM Interval value. Wireless clients detect the beacons and awaken to receive the broadcast and multicast messages. The default value is 1. Valid settings are between 1 and 255. 
help185,A DTIM is a countdown informing clients of the next window for listening to broadcast and multicast messages. When the wireless router has buffered broadcast or multicast messages for associated clients, it sends the next DTIM with a DTIM Interval value. Wireless clients detect the beacons and awaken to receive the broadcast and multicast messages. The default value is 1. Valid settings are between 1 and 255. 
#From:up.tz.17,(GMT-03:30) Newfoundland 
up.tz.17,(GMT-03:30) Newfoundland 
#From:sd.intro,All of your Internet and network connection details are displayed on this page. The firmware version is also displayed here. 
sd.intro,인터넷과 네트워크 설정 상세 정보를 이 페이지에서 확인할 수 있습니다. 펌웨어 버전 또한 여기에서 확인할 수 있습니다.
#From:tf.Upload,Upload 
tf.Upload,업로드
#From:help605,MAC address 
help605,MAC address 
#From:KR2,Invalid IP address 
KR2,IP 주소가 잘못되었습니다. 
#From:.vs.proto,Protocol 
.vs.proto,프로토콜
#From:tt.Second,Second 
tt.Second,초
#From:help549,The action of data packets being transmitted from one router to another 
help549,The action of data packets being transmitted from one router to another 
#From:at.Prot.-1,Other 
at.Prot.-1,기타
#From:help506,Sending and Receiving data transmissions at the sane time 
help506,Sending and Receiving data transmissions at the sane time 
#From:wps.lost,This will cause all wireless settings to be lost. 
wps.lost,이 설정으로 인해 무선 설정을 잃게 됩니다.
#From:help26,Note: 
help26,주의: 
#From:up.tz.35,(GMT+02:00) Helsinki, Riga, Tallinn 
up.tz.35,(GMT+02:00) Helsinki, Riga, Tallinn 
#From:GW_SMTP_TO_ADDRESS_INVALID,The given TO address (%s) is invalid 
GW_SMTP_TO_ADDRESS_INVALID,설정한 TO 주소 (%s)가 맞지 않습니다. 
#From:WIFISC_AP_REGISTRATION_FAIL,AP failed to registere to Registrar (%s) through %s, reason (%s), err code (%u) 
WIFISC_AP_REGISTRATION_FAIL,AP가 %s 를 통해 Registrar (%s) 등록에 실패하였습니다. 원인 (%s), 에러 코드 (%u) 
#From:help642,A sequence of characters that is used to authenticate requests to resources on a network 
help642,A sequence of characters that is used to authenticate requests to resources on a network 
#From:bwn.intro.ICS,Use this section to configure your Internet Connection type. There are several connection types to choose from: Static IP, DHCP, PPPoE, PPTP, L2TP, and BigPond. If you are unsure of your connection method, please contact your Internet Service Provider. 
bwn.intro.ICS,인터넷 연결 유형을 설정합니다. 선택할 수 있는 연결 종류가 여러 가지입니다. (Static IP, DHCP, PPPoE, PPTP and L2TP) 연결 종류가  확실하지 않으면, 가입하신 인터넷 서비스 사업자(ISP)에 확인하십시오. 
#From:help81,When enabled, this option causes the router to automatically measure the useful uplink bandwidth each time the WAN interface is re-established (after a reboot, for example). 
help81,When enabled, this option causes the router to automatically measure the useful uplink bandwidth each time the WAN interface is re-established (after a reboot, for example). 
#From:help833,This option allows you to save the router's configuration to a file on your computer. Be sure to save the configuration before performing a firmware upgrade. 
help833,This option allows you to save the router's configuration to a file on your computer. Be sure to save the configuration before performing a firmware upgrade. 
#From:tps.intro3,Your D-Link Router includes an integrated print server that allows a printer to be shared between multiple computers on your network. From this page you can select which printing protocols to enable. 
tps.intro3,내부 네트워크 상에 여러 대의 PC 간에 프린터를 공유해서 사용할 수 있도록 통합 프린터 서버를 설정할 수 있습니다. 이 페이지에서 사용할 프린팅 프로토콜을 선택할 수 있습니다. 
#From:tps.intro5,To use the shared printer from this computer, follow the setup instructions found in <a href="../Help/Basic.shtml#PS" onclick="return jump_if();" style="white-space: nowrap;">Help -> Home -> Printer Wizard</a>. 
tps.intro5,PC에서 프린터를 공유하려면, <a href="../Help/Basic.shtml#PS" onclick="return jump_if();" style="white-space: nowrap;">Help &rarr; Home &rarr; Printer Wizard 에 있는 설정 안내를 따라하십시오. 
#From:help428,Automatic Private IP Addressing 
help428,Automatic Private IP Addressing 
#From:GW_WISH_RULES_NAME_ALREADY_USED,Name '%s' is already used. 
GW_WISH_RULES_NAME_ALREADY_USED,이름 '%s'이 이미 사용중입니다. 
#From:LW48,When a LAN application that uses a protocol other than UDP, TCP, or ICMP initiates a session to the Internet, the router's NAT can track such a session, even though it does not recognize the protocol. This feature is useful because it enables certain applications (most importantly a single VPN connection to a remote host) without the need for an ALG. 
LW48,UDP, TCP, ICMP 와는 다른 프로토콜을 사용하는 LAN 응용프로그램이 인터넷상으로 세션을 시작할 때, 공유기의 NAT 는 그 세션을 트랙합니다. 해당 프로토콜을 알지 못하는 경우라도 트랙 할 수 있습니다. 이 기능은 ALG 필요 없이 특정 응용프로그램 활성시 유용합니다.(대부분의 경우 원격지 호스트에 단일 VPN 연결 시) 
#From:ss.Sent,Sent 
ss.Sent,전송하였습니다. 
#From:YM54,Invalid remote start IP Address. 
YM54,원격지 시작 IP 주소가 잘못되었습니다. 
#From:help378,Group Key Update Interval: 
help378,Group Key Update Interval: 
#From:help682,Session key 
help682,Session key 
#From:LW9,Current PIN 
LW9,현재 PIN
#From:gw.gm.80,Tribes of Vengeance 
gw.gm.80,Tribes of Vengeance 
#From:.uploadgood,Upload Succeeded 
.uploadgood,업로드가 성공하였습니다. 
#From:LW41,This wizard is designed to assist you in your wireless network setup. It will guide you through step-by-step instructions on how to set up your wireless network and how to make it secure. 
LW41,무선 네트워크 설정을 도울 수 있도록 마법사를 만들었습니다. 마법사가 무선 네트워크를 단계별로 설정하는 방법과 보안을 설정하는 방법을 안내할 것입니다. 
#From:wps.p3.2,-PIN (Personal Identification Number) 
wps.p3.2,-PIN (Personal Identification Number) 
#From:ub.intro.1,The uploaded firmware file may not be correct. You may have uploaded a file that is not intended for this device, or the uploaded file may be corrupted. 
ub.intro.1,업로드한 펌웨어 파일이 잘못되었습니다.  업로드한 파일이 이 장비의 파일이 아니거나 파일이 손상되었을 수 있습니다. 
#From:wprn.s3c,The setup executable will search for a compatible printer driver on your computer. If one cannot be found, you will be prompted to insert the driver CD that shipped with the printer. 
wprn.s3c,PC에서 호환 가능한 프린터 드라이버를 검색합니다. 드라이버가 검색되지 않으면, 프린터와 같이 들어 있는 드라이버 CD를 삽입하도록 팝업 창이 뜰 것입니다. 
#From:haf.dmz.20,The router provides only limited firewall protection for the DMZ host. The router does not forward a TCP packet that does not match an active DMZ session, unless it is a connection establishment packet (SYN). Except for this limited protection, the DMZ host is effectively "outside the firewall". Anyone considering using a DMZ host should also consider running a firewall on that DMZ host system to provide additional protection. 
haf.dmz.20,공유기는 DMZ 보호를 위해 제한적인 방화벽 기능을 제공합니다. 공유기는 연결 확인 패킷(SYN)이 아니면 액티브 DMZ 세션과 맞지 않는 TCP 패킷은 전송하지 않습니다. 제한된 보호 기능외에 DMZ 호스트는 실제적으로  "방화벽 외부" 에 있습니다. DMZ 사용을 고려한다면 추가적인 보호를 제공하기 위해 DMZ 시스템 상에서 방화벽을 두는 것도 고려하시기 바랍니다. 
#From:help277,Time interval the machine can be idle before the PPPoE connection is disconnected. The Maximum Idle Time value is only used for the "On demand" and "Manual" reconnect modes. 
help277,Time interval the machine can be idle before the PPPoE connection is disconnected. The Maximum Idle Time value is only used for the "On demand" and "Manual" reconnect modes. 
#From:help343,Go to the Apple Menu, select System Preferences, select Network, and select the Ethernet Adapter connecting to the D-Link router. Select the Ethernet button and the Ethernet ID will be listed. This is the same as the MAC address. 
help343,Go to the Apple Menu, select System Preferences, select Network, and select the Ethernet Adapter connecting to the D-Link router. Select the Ethernet button and the Ethernet ID will be listed. This is the same as the MAC address. 
#From:ss.Received,Received 
ss.Received,수신되었습니다. 
#From:help263,Check this option to connect to the internet through Telstra BigPond Cable Broadband in Australia. Telstra BigPond provides the values for 
help263,Check this option to connect to the internet through Telstra BigPond Cable Broadband in Australia. Telstra BigPond provides the values for 
#From:YM124,Enable Auto Channel Scan so that the router can select the best possible channel for your wireless network to operate on. 
YM124,공유기가 가장 좋은 채널을 선택할 수 있도록 공유기의 무선 네트워크를 자동 채널 스캔으로 설정하십시오. 
#From:help41,This feature enables forwarding of "magic packets" (that is, specially formatted wake-up packets) from the WAN to a LAN computer or other device that is "Wake on LAN" (WOL) capable. The WOL device must be defined as such on the <a href="../Advanced/Virtual_Server.shtml"> Advanced &rarr; Virtual Server</a> page. The LAN IP address for the virtual server is typically set to the broadcast address 192.168.0.255. The computer on the LAN whose MAC address is contained in the magic packet will be awakened. 
help41,This feature enables forwarding of "magic packets" (that is, specially formatted wake-up packets) from the WAN to a LAN computer or other device that is "Wake on LAN" (WOL) capable. The WOL device must be defined as such on the <a href="../Advanced/Virtual_Server.shtml"> Advanced &rarr; Virtual Server</a> page. The LAN IP address for the virtual server is typically set to the broadcast address 192.168.0.255. The computer on the LAN whose MAC address is contained in the magic packet will be awakened. 
#From:.bsecure.free.trial,FREE 30 Day Trial 
.bsecure.free.trial,30일 무료 버전
#From:tf.FUNO,Firmware Upgrade Notification Options 
tf.FUNO,펌웨어 업그레이드 알림 옵션 
#From:help492,An electronic method of providing credentials to a server in order to have access to it or a network 
help492,An electronic method of providing credentials to a server in order to have access to it or a network 
#From:aw.sgi,Short GI 
aw.sgi,Short GI 
#From:help386,Amount of time before a client will be required to re-authenticate. 
help386,Amount of time before a client will be required to re-authenticate. 
#From:help254.ict,There are several connection types to choose from: Static IP, DHCP, PPPoE, PPTP, L2TP, and BigPond. If you are unsure of your connection method, please contact your Internet Service Provider. Note: If using the PPPoE option, you will need to ensure that any PPPoE client software on your computers is removed or disabled. 
help254.ict,There are several connection types to choose from: Static IP, DHCP, PPPoE, PPTP and L2TP. If you are unsure of your connection method, please contact your Internet Service Provider. Note: If using the PPPoE option, you will need to ensure that any PPPoE client software on your computers is removed or disabled. 
#From:.aa.wiz.s5.msg1,Select the method for filtering. 
.aa.wiz.s5.msg1,필터링 방법을 선택하십시오. 
#From:td.VPWK,Verify Password or Key 
td.VPWK,비밀번호 또는 키 재입력
#From:GW_WLAN_RTS_THRESHOLD_INVALID,RTS threshold should be between 0 and 2347. 
GW_WLAN_RTS_THRESHOLD_INVALID,RTS 값은 0 ~ 2347 입니다. 
#From:help526,Fragmentation 
help526,Fragmentation 
#From:gw.gm.33,Need for Speed 3 
gw.gm.33,Speed 3 필요
#From:VIRTUAL_SERVERS,Virtual Server 
VIRTUAL_SERVERS,가상 서버
#From:GW_WAN_L2TP_PASSWORD_INVALID,A L2TP password MUST be specified 
GW_WAN_L2TP_PASSWORD_INVALID,L2TP 비밀번호를 반드시 지정해 주십시오. 
#From:gw.gm.0,Age of Empires 
gw.gm.0,Age of Empires 
#From:help631,The third layer of the OSI model which handles the routing of traffic on a network 
help631,The third layer of the OSI model which handles the routing of traffic on a network 
#From:.macfilt,MAC Address Filter 
.macfilt,MAC 주소 필터
#From:help606,A unique hardware ID assigned to every Ethernet adapter by the manufacturer. 
help606,A unique hardware ID assigned to every Ethernet adapter by the manufacturer. 
#From:YM12,Some configuration changes have an effect upon other system settings. Those changes may impact in a negative way, raising warnings that need to be communicated to you. A warning may indicate a feature has been modified, or even disabled, to match the new operating conditions. 
YM12,일부 설정 변경이 다른 시스템 설정에 영향을 줍니다. 이런 수정 사항이 통신에 나쁜 영향을 주어 경고를 발생시킬 수도 있습니다. 경고는 수정된 기능이나 비활성화된 기능등을 나타내어 새로운 동작 환경에 맞도록 해 줍니다. 
#From:bd.DAB.note,(compatibility for some DHCP Clients) 
bd.DAB.note,(일부 DHCP 클라이언트와의 호환성)
#From:ZM14,User is logging out 
ZM14,사용자가 로그 아웃하였습니다. 
#From:help796,Select the kinds of events that you want to view. 
help796,Select the kinds of events that you want to view. 
#From:help665,To restart a computer and reload it's operating software or firmware from nonvolatile storage. 
help665,To restart a computer and reload it's operating software or firmware from nonvolatile storage. 
#From:tf.really?.FWF,Do you really want to reprogram the device using the firmware file 
tf.really?.FWF,사용되고 있는 펌웨어 파일을 다시 만드시겠습니까?
#From:YM28,Invalid RTS Threshold 
YM28,RTS 값이 잘못되었습니다. 
#From:tt.time.16,3 pm 
tt.time.16,3 pm 
#From:up.tz.05,(GMT-07:00) Arizona 
up.tz.05,(GMT-07:00) Arizona 
#From:help861,This email address will appear as the sender when you receive a log file or firmware upgrade notification via email. 
help861,This email address will appear as the sender when you receive a log file or firmware upgrade notification via email. 
#From:help19,Select the protocol used by the service. 
help19,Select the protocol used by the service. 
#From:YM184,The schedule is not valid. 
YM184,스케쥴이 잘못되었습니다. 
#From:int.intro.WCNWz7,If you would like to utilize our easy to use Web-based Wizards to assist you in configuring the Microsoft's Windows Connect Now technology, click on the Setup Wizard button below. 
int.intro.WCNWz7,웹기반 마법사를 사용하여 쉽게 마이크로 소프트의 Windows Connect Now을 설정할 수 있습니다. 아래의 설정 마법사 버튼을 누르십시오. 
#From:bwn.DWM,DHCP WAN Mode 
bwn.DWM,DHCP WAN Mode 
#From:.ICMP,ICMP 
.ICMP,ICMP 
#From:help148,The section lists the currently allowed web sites. 
help148,The section lists the currently allowed web sites. 
#From:bws.Auth.2,Shared Key 
bws.Auth.2,Shared Key 
#From:rs.intro.1,The restored configuration file is not correct. You may have restored a file that is not intended for this device, or the restored file may be corrupted. 
rs.intro.1,복구한 설정 파일이 잘못되었습니다. 설정 파일이 장비에 맞지 않거나 손상되었을 수 있습니다. 
#From:help92,The protocol used by the messages. 
help92,The protocol used by the messages. 
#From:GW_NAT_BOTH,Both 
GW_NAT_BOTH,Both 
#From:hhav.sch,Select a schedule for when the virtual server will be enabled. If you do not see the schedule you need in the list of schedules, go to the <a href="../Tools/Schedules.shtml" onclick="return jump_if();">Tools &rarr; Schedules</a> screen and create a new schedule. 
hhav.sch, 가상 서버를 설정할 때 이 스케쥴을 선택하십시오. 스케쥴 리스트에 필요한 스케쥴이 없으면, <a href="../Tools/Schedules.shtml" onclick="return jump_if();">도구 &rarr; 스케줄</a> 로 가서 새로운 스케쥴을 만드십시오.  
#From:rs.success,Restore Success 
rs.success,복구 성공 
#From:help868,Email Log When Full or on Schedule 
help868,Email Log When Full or on Schedule 
#From:gw.gm.22,Half Life 
gw.gm.22,Half Life 
#From:up.tz.29b,(GMT+01:00) Budapest, Vienna, Prague, Warsaw 
up.tz.29b,(GMT+01:00) Budapest, Vienna, Prague, Warsaw 
#From:day,Day 
day,Day 
#From:GW_DHCP_SERVER_DISABLED_WARNING,<warn>DHCP Server is being disabled because the LAN subnet is not suitable</warn> 
GW_DHCP_SERVER_DISABLED_WARNING,<warn>LAN 서브넷이 맞지 않아 DHCP 서버가 비활성화 되었습니다. </warn>
#From:YM173,Password and Verify Password do not match. Please reconfirm admin password. 
YM173,비밀번호와 확인한 비밀번호가 맞지 않습니다. 관리자 비밀번호를 다시 확인해 주십시오. 
#From:GW_INET_ACCESS_POLICY_MAC_INVALID,Invalid MAC address %m. 
GW_INET_ACCESS_POLICY_MAC_INVALID,MAC 주소 %m 가 잘못되었습니다. 
#From:.password,Password 
.password,비밀번호
#From:LW2,Wi-Fi Protected Setup 
LW2,Wi-Fi Protected 설정
#From:RATE_ESTIMATOR_RESOURCE_ERROR,Rate estimation aborted as low on resources 
RATE_ESTIMATOR_RESOURCE_ERROR,속도 측정이 리소스 부족으로 중단되었습니다. 
#From:KR75,Assign any unused IP address in the range of IP addresses available for the LAN. 
KR75,LAN 에서 사용가능한 IP 주소 중에서 사용되지 않은 IP 주소를 할당하십시오.
#From:tt.time.6,5 am 
tt.time.6,5 am 
#From:help721,A standard that allows network devices to discover each other and configure themselves to be a part of the network 
help721,A standard that allows network devices to discover each other and configure themselves to be a part of the network 
#From:501.12,Click this button to start creating a new access control policy. 
501.12,버튼을 눌러 새로운 접근 제어 정책을 생성하십시오. 
#From:GW_XML_CONFIG_WRITE_FAILED,Failed to write configuration file: %s 
GW_XML_CONFIG_WRITE_FAILED,설정 파일 저장에 실패하였습니다. : %s
#From:help102,Enable: 
help102,Enable: 
#From:GW_WISH_RULES_NAME_USED_INVALID,Name '%s' is already used. 
GW_WISH_RULES_NAME_USED_INVALID,이름 '%s' 이 이미 사용중입니다. 
#From:GW_ROUTES_ROUTE_GATEWAY_NOT_IN_SUBNET_WARNING,<warn>Route gateway IP %v is not in interface subnet (%v/%v) and will be disabled.</warn> 
GW_ROUTES_ROUTE_GATEWAY_NOT_IN_SUBNET_WARNING,<warn>게이트웨이 IP %v 가 인터페이스 서브넷 (%v/%v)에 없고 비활성화 됩니다.</warn>
#From:ts.rfd,Restore To Factory Default 
ts.rfd,공장 초기화 값으로 복구 
#From:GW_DHCP_SERVER_POOL_SIZE_IN_SUBNET_INVALID,The DHCP server pool size is too big to fit in LAN subnet %v. 
GW_DHCP_SERVER_POOL_SIZE_IN_SUBNET_INVALID,DHCP 서버 풀 범위가 LAN 서브넷 %v 범위를 넘었습니다. 
#From:hhac.en,Check <strong>Enable Access Control</strong> if you want to enforce rules that limit Internet access from specific LAN computers. 
hhac.en,LAN에 있는 특정 PC에서의 인터넷 접속을 제한하고자 하면 <strong>접근 제어 설정</strong>를 확인하십시오. 
#From:int.LWlsWz,Manual Configure 
int.LWlsWz,수동 설정
#From:aw.AS,Aggregation Max Size 
aw.AS,최대 통합 크기  
#From:help33b,When the PPTP ALG is enabled, LAN computers can establish PPTP VPN connections either with the same or with different VPN servers. When the PPTP ALG is disabled, the router allows VPN operation in a restricted way. LAN computers are typically able to establish VPN tunnels to different VPN Internet servers but not to the same server. The advantage of disabling the PPTP ALG is to increase VPN performance. Enabling the PPTP ALG also allows incoming VPN connections to a LAN side VPN server (refer to <a href="../Advanced/Virtual_Server.shtml">Advanced &rarr; Virtual&nbsp;Server</a>). 
help33b,When the PPTP ALG is enabled, LAN computers can establish PPTP VPN connections either with the same or with different VPN servers. When the PPTP ALG is disabled, the router allows VPN operation in a restricted way. LAN computers are typically able to establish VPN tunnels to different VPN Internet servers but not to the same server. The advantage of disabling the PPTP ALG is to increase VPN performance. Enabling the PPTP ALG also allows incoming VPN connections to a LAN side VPN server (refer to <a href="../Advanced/Virtual_Server.shtml">Advanced &rarr; VirtualServer</a>). 
#From:YM171,This is a list of all active conversations involving wireless clients in the local network. 
YM171,로컬 네트워크의 모든 무선 클라이언트를 포함하는 액티브 통신 리스트입니다.
#From:at.STR,Select Transmission Rate 
at.STR,전송 속도 선택
#From:gw.vs.2,HTTPS 
gw.vs.2,HTTPS 
#From:ts.ls,Load From Local Hard Drive 
ts.ls,로컬 드라이브에서 불러오기
#From:tt.Aug,Aug 
tt.Aug,Aug 
#From:GW_DHCP_SERVER_RESERVED_IP_NOT_LAN_IP_INVALID,Reserved IP %v conflicts with configured LAN IP Address 
GW_DHCP_SERVER_RESERVED_IP_NOT_LAN_IP_INVALID,보유중인 IP %v가 설정된 LAN IP 주소와 충돌합니다. 
#From:am.FM.4,Turn MAC Filtering ON and DENY computers listed to access the network 
am.FM.4,MAC 필터링 DENY 옵션으로 PC들의 네트워크 접속 차단   
#From:aa.wiz.s1.msg5,Step 5 - Select filters 
aa.wiz.s1.msg5,Step 5 - 필터 선택
#From:ACCESS_CONTROL,Access Control 
ACCESS_CONTROL,접근 제어
#From:GW_NAT_VS_PUBLIC_PORT_CAN_NOT_MATCH_HTTP_ADMIN_PORT,Virtual server '%s' can not use the router's HTTP WAN administration port, %u 
GW_NAT_VS_PUBLIC_PORT_CAN_NOT_MATCH_HTTP_ADMIN_PORT,가상 서버 '%s' 는 공유기의 HTTP WAN 관리 포트 %u를 사용할 수 없습니다. 
#From:GW_DYNDNS_HERROR,Error updating dynamic DNS entry: %s. Please check configuration. Disabling DynDNS 
GW_DYNDNS_HERROR,다이나믹 DNS 엔트리: %s 에러 업데이트. 설정을 확인하십시오. DynDNS 비활성화.  
#From:hhav.r_netmask,The netmask field identifies the portion of the destination IP in use. 
hhav.r_netmask,사용중인 목적지 IP 주소의 넷마스크 부분을 확인합니다. 
#From:vs.vslist,VIRTUAL SERVERS LIST 
vs.vslist,가상 서버 리스트
#From:help729,UTP 
help729,UTP 
#From:sps.ports,Ports to Open 
sps.ports,오픈 포트 
#From:YM137,Note that some of these options can interact with other port restrictions. Endpoint Independent Filtering takes priority over inbound filters or schedules, so it is possible for an incoming session request related to an outgoing session to enter through a port in spite of an active inbound filter on that port. However, packets will be rejected as expected when sent to blocked ports (whether blocked by schedule or by inbound filter) for which there are no active sessions. Port and Address Restricted Filtering ensures that inbound filters and schedules work precisely, but prevents some level of connectivity, and therefore might require the use of port triggers, virtual servers, or port forwarding to open the ports needed by the application. Address Restricted Filtering gives a compromise position, which avoids problems when communicating with certain other types of NAT router (symmetric NATs in particular) but leaves inbound filters and scheduled access working as expected. 
YM137,이 옵션중의 일부는 다른 포트 제한과 같이 동작할 수 있습니다. 엔드포인트 독립 필터링(Endpoint Independent Filtering)이 수신 필터나 스케쥴에 우선합니다. 따라서, 해당 포트상의 액티브 수신 필터에도 불구하고 포트를 통해 들어가는 송신 세션과 관련된 수신 세션 요청이 가능합니다. 그러나, 예상대로 액티브 세션이 없는 차단된 포트(스케쥴에 의해 차단되었든지, 수신 필터로 차단되었든지) 로 패킷이 전송될 때 해당 패킷들은 차단 될 것입니다. 포트와 주소 제한 필터링(Address Restricted Filtering)을 사용하여 수신 필터와 스케쥴이 정확하게 동작할 수 있도록 해 줍니다. 그러나, 일부 연결을 제한 할 수 있어 응용프로그램에서 필요한 포트를 열기 위해 포트 트리거, 가상 서버, 포트 포워딩 사용이 필요할 수도 있습니다. 주소 제한 필터링은 공유기의 특정 NAT 종류(특히, symmetric NAT)와 통신 문제를 피할 수 있게 해주지만, 수신 필터와 스케쥴 접근은 예상대로 동작하도록 그냥 둡니다.
#From:help757,Wireless Internet Service Provider 
help757,Wireless Internet Service Provider 
#From:help851,If you do not have the NTP Server option in effect, you can either manually set the time for your router here, or you can click the <span class="button_ref">Copy Your Computer's Time Settings</span> button to copy the time from the computer you are using. (Make sure that computer's time is set correctly.) 
help851,If you do not have the NTP Server option in effect, you can either manually set the time for your router here, or you can click the <span class="button_ref">Copy Your Computer's Time Settings</span> button to copy the time from the computer you are using. (Make sure that computer's time is set correctly.) 
#From:hhag.20,You can select a computer from the list of DHCP clients in the <strong>Computer Name</strong> drop down menu, or you can manually enter the IP address of the LAN computer to which you would like to open the specified port. 
hhag.20,<strong>컴퓨터 이름</strong> 드랍 다운 메뉴의 DHCP 클라이언트 리스트에서 PC에서 선택하거나, 지정된 포트를 열기 위해 LAN 컴퓨터의 IP 주소를 직접 입력할 수 있습니다. 
#From:YM74,Priority Classifiers 
YM74,우선 순위 분류
#From:GW_SYSLOG_ADDRESS_IN_SUBNET_INVALID,Syslog server IP address %v is not in the lan subnet. 
GW_SYSLOG_ADDRESS_IN_SUBNET_INVALID,시스템 로그 서버 IP 주소 %v가 LAN 서브넷에 없습니다. 
#From:aa.alert.7,This Machine rule is already used. 
aa.alert.7,장비 규칙이 이미 사용중입니다. 
#From:YM86,Enable this option if you want to allow WISH to prioritize wireless traffic. 
YM86,WISH를 허용하여 무선 순위 트래픽에 우선 순위를 주고 싶은 경우 이 옵션을 활성화하십시오. 
#From:af.DI,DMZ IP Address 
af.DI,DMZ IP 주소 
#From:tsc.pingt_mesg,Ping Test sends "ping" packets to test a computer on the Internet. 
tsc.pingt_mesg,핑 테스트는 인터넷상에 있는 PC를 테스트하기 위해 "ping" 패킷을 보냅니다. 
#From:help595,Latency 
help595,Latency 
#From:sl.VLevs,View Levels 
sl.VLevs,뷰 레벨
#From:tsc.EndTime,End Time 
tsc.EndTime,종료 시간
#From:GW_MAC_FILTER_MAC_UNIQUENESS_INVALID,MAC address is already used: %m 
GW_MAC_FILTER_MAC_UNIQUENESS_INVALID,MAC 주소가 이미 사용중입니다.: %m
#From:help151,A MAC address is a unique ID assigned by the manufacturer of the network adapter. 
help151,A MAC address is a unique ID assigned by the manufacturer of the network adapter. 
#From:GW_MAC_FILTER_NULL_MAC_INVALID,MAC address filter can't be NULL address: %m 
GW_MAC_FILTER_NULL_MAC_INVALID,MAC 주소 필터의 MAC 주소를 반드시 입력해 주십시오: %m
#From:hhta.pt,Choose a port to open for remote management. 
hhta.pt,원격 관리를 위해 사용할 포트를 선택하십시오. 
#From:aw.32,32 Kbytes 
aw.32,32 Kbytes 
#From:GW_INET_ACCESS_DROP_ACCESS_CONTROL,Internet access control dropped packet from %v:%u to %v:%u (protocol %u) 
GW_INET_ACCESS_DROP_ACCESS_CONTROL,인터넷 액세스 제어에 의해 %v:%u 에서 %v:%u 로 (protocol %u) 패킷이 차단되었습니다. 
#From:GW_WAN_LAN_SUBNET_CONFLICT_INVALID,WAN subnet conflicts with LAN subnet 
GW_WAN_LAN_SUBNET_CONFLICT_INVALID,WAN 서브넷이 LAN 서브넷과 충돌됩니다. 
#From:help671,Routing Information Protocol is used to synchronize the routing table of all the routers on a network 
help671,Routing Information Protocol is used to synchronize the routing table of all the routers on a network 
#From:ebwl.AChan,Enable Auto Channel Scan 
ebwl.AChan,자동 채널 스캔 설정
#From:help747,Wired Equivalent Privacy is security for wireless networks that is supposed to be comparable to that of a wired network 
help747,Wired Equivalent Privacy is security for wireless networks that is supposed to be comparable to that of a wired network 
#From:LW67,Enabled/Not Configured 
LW67,활성화/설정 되지 않음
#From:WIFISC_AP_DEL_APSETTINGS_FAIL,DelAPSettings by (%s) failed, reason (%s), err_code (%u) 
WIFISC_AP_DEL_APSETTINGS_FAIL,DelAPSettings by (%s) failed, reason (%s), err_code (%u) 
#From:bd.CName,Computer Name 
bd.CName,컴퓨터 이름 
#From:KR85,WINS Servers store information regarding network hosts, allowing hosts to 'register' themselves as well as discover other available hosts, e.g. for use in Network Neighbourhood. 
KR85,WINS 서버는 클라이언트를 'register'에 허용하는 것과 내 네트워크 환경등에서 다른 클라이언트를 검색한 클라이언트 정보를 저장합니다.
#From:help707,TCP/IP 
help707,TCP/IP 
#From:help305rt,It is recommended that you use the default settings if you do not have an existing network. 
help305rt,It is recommended that you use the default settings if you do not have an existing network. 
#From:li.alert.3,Invalid password, please try again. 
li.alert.3,비밀번호가 맞지 않습니다. 다시 시도하십시오. 
#From:GW_DYNDNS_UPDATE_TO,Updating dynamic DNS entry due to timeout 
GW_DYNDNS_UPDATE_TO,타임아웃으로 인한 DDNS 엔트리  업데이트 
#From:tt.week.4,4th 
tt.week.4,4th 
#From:help451,Transmitting data in all directions at once 
help451,Transmitting data in all directions at once 
#From:tt.Day,Day 
tt.Day,일 
#From:YM115,Invalid MTU Size 
YM115,MTU 크기가 잘못되었습니다. 
#From:GW_LAN_CARRIER_LOST,LAN Ethernet Carrier Lost 
GW_LAN_CARRIER_LOST,LAN 이더넷 신호가 손실되었습니다. 
#From:hhai.action,Each rule can either <strong>Allow</strong> or <strong>Deny</strong> access from the WAN. 
hhai.action,각각의 규칙에서 WAN 으로부터의 접속을 <strong>허용</strong> 또는 <strong>거부</strong> 할 수 있습니다.
#From:YM83,Host 1 Port Range 
YM83,호스트 1 포트 범위
#From:help121,The Policy Wizard guides you through the steps of defining each access control policy. A policy is the "Who, What, When, and How" of access control -- whose computer will be affected by the control, what internet addresses are controlled, when will the control be in effect, and how is the control implemented. You can define multiple policies. The Policy Wizard starts when you click the button below and also when you edit an existing policy. 
help121,The Policy Wizard guides you through the steps of defining each access control policy. A policy is the "Who, What, When, and How" of access control -- whose computer will be affected by the control, what internet addresses are controlled, when will the control be in effect, and how is the control implemented. You can define multiple policies. The Policy Wizard starts when you click the button below and also when you edit an existing policy. 
#From:bwl.Intro.1,Use this section to configure the wireless settings for your D-Link Router. Please note that changes made on this section may also need to be duplicated on your Wireless Client. 
bwl.Intro.1,여기에서 공유기의 무선 설정을 할 수 있습니다. 여기에서 수정한 사항은 무선 클라이언트에서도 동일하게 해 주셔야 합니다. 
#From:wwl.128bits,128 bits 
wwl.128bits,128 bits 
#From:wwl.intro.s1,Your wireless network needs a name so it can be easily recognized by wireless clients. For security purposes, it is highly recommended to change the pre-configured network name. 
wwl.intro.s1,무선 네트워크에서는 무선 클라이언트가 쉽게 확인할 수 있는 이름이 필요합니다.  보안을 위해, 디폴트로 설정되어 있는 네트워크 이름을 변경하실 것을 권장합니다.
#From:LW51,When an excessive number of wireless packet collisions are occurring, wireless performance can be improved by using the RTS/CTS (Request to Send/Clear to Send) handshake protocol. 
LW51,무선 패킷 충돌 수가 너무 많이 발생하는 경우, RTS/CTS(Request to Send/Clear to Send) 프로토콜을 사용하여 무선 성능을 향상시킬 수 있습니다.
#From:YM178,You must enter a numeric value between 0 and 8760 inclusive. 
YM178,숫자  0 ~ 8760 (8706 포함) 을 반드시 입력하십시오. 
#From:.aa.bsecure.cults,Cults
.aa.bsecure.cults,Cults
#From:wwa.msg.set.pppoe,To set up this connection you will need to have a Username and Password from your Internet Service Provider. If you do not have this information, please contact your ISP. 
wwa.msg.set.pppoe,인터넷에 연결하기 위해서는 가입하신 인터넷 사업자(ISP)에서 받은 사용자명과 비밀번호가 필요합니다. 사용자명과 비밀번호를 모르시면 ISP에 확인하십시오.  
#From:YM5,Forbidden 
YM5,금지
#From:tps.enraw,Enable Raw Port Printing 
tps.enraw,Raw 포트 프린팅 설정
#From:.bsecure.security.blurb,Security Services are a great way to protect all your PC's with a unified suite of services that are managed from any web browser. Includes Anti-Virus, Firewall, Intrusion Detection, Content Filtering, Spam Killer and Pop-up blocker. Any or all services can be selected at one low price. 
.bsecure.security.blurb,보안 서비스는 어떤 웹브라우저에서도 관리가 되도록 하는 통합 서비스로 PC를 보호할 수 있습니다. 안티 바이러스, 방화벽, 침입 탐지, 콘텐츠 필터링, 스팸 킬러, 팝업 차단기 등을 포함합니다. 이런 모든 서비스는 낮은 가격으로 선택할 수 있습니다.
#From:ZM17,Firmware updates are released periodically to improve the functionality of your router and to add features. If you run into a problem with a specific feature of the router, check if updated firmware is available for your router. 
ZM17,공유기 기능 향상이나 기능 추가를 위해 주기적으로 펌웨어를 업데이트합니다. 공유기의 특정 기능에 문제가 있을 경우, 업데이트 할 펌웨어가 있는 지를 확인하십시오.
#From:bd.DHCP,DHCP Client List 
bd.DHCP,DHCP 클라이언트 리스트
#From:help865,Enter your account for sending email. 
help865,Enter your account for sending email. 
#From:help501,Download 
help501,Download 
#From:wwl.s4.intro.z1,The WEP ( Wired Equivalent Privacy) key must meet one of following guildelines: 
wwl.s4.intro.z1,WEP 키는 다음과 같은 기준에 맞아야 합니다. 
#From:LW14,<strong>Enable</strong> if other wireless devices you wish to include in the local network support Wi-Fi Protected Setup. 
LW14,Wi-Fi Protected 설정을 지원하는 로컬 네트워크에서 다른 무선 장비들을 포함시키려면  <strong>설정에 체크</strong> 하십시오. 
#From:help280,The ISP provides this parameter, if necessary. The value may be the same as the Gateway IP Address. 
help280,The ISP provides this parameter, if necessary. The value may be the same as the Gateway IP Address. 
#From:help775,DHCP Connection 
help775,DHCP Connection 
#From:GW_BIGPOND_INIT,BigPond enabled 
GW_BIGPOND_INIT,BigPond 설정
#From:.connect,Connect 
.connect,연결
#From:ta.wcn.bv,Save to Windows Connect Now 
ta.wcn.bv,Windows Connect Now 에 저장 
#From:.always,Always 
.always,Always
#From:.minutes,(minutes) 
.minutes,(분)
#From:GW_NAT_VS_IP_ADDRESS_CAN_NOT_MATCH_ROUTER,Virtual server '%s' can not use the router's IP address, %v. 
GW_NAT_VS_IP_ADDRESS_CAN_NOT_MATCH_ROUTER,가상 서버 '%s' 에서 공유기의 IP 주소 %v를 사용할 수 없습니다. 
#From:as.IPR.b,Firewall Port 
as.IPR.b,방화벽 포트
#From:GW_SCHEDULES_IN_USE_INVALID,Schedule '%s' can't be deleted or renamed because it is used. 
GW_SCHEDULES_IN_USE_INVALID,사용중이므로 스케쥴 '%s' 를 삭제하거나 이름을 바꿀 수 없습니다. 
#From:wepkey3,WEP Key 3 
wepkey3,WEP Key 3 
#From:gw.gm.67,eMule 
gw.gm.67,eMule 
#From:help514,Electronic Mail is a computer-stored message that is transmitted over the Internet 
help514,Electronic Mail is a computer-stored message that is transmitted over the Internet 
#From:GW_INET_ACCESS_DROP_BAD_PKT,Internet access control dropped bad packet from %v to %v (protocol %u) 
GW_INET_ACCESS_DROP_BAD_PKT,인터넷 접속 제어에 의해 %v 에서 %v (protocol %u) 로 불량 패킷을 폐기하였습니다. 
#From:gw.gm.12,Dark Reign 2 
gw.gm.12,Dark Reign 2 
#From:help846,Select the starting and ending times for the change to and from daylight saving time. For example, suppose for DST Start you select Month="Oct", Week="3rd", Day="Sun" and Time="2am". This is the same as saying: "Daylight saving starts on the third Sunday of October at 2:00 AM." 
help846,Select the starting and ending times for the change to and from daylight saving time. For example, suppose for DST Start you select Month="Oct", Week="3rd", Day="Sun" and Time="2am". This is the same as saying: "Daylight saving starts on the third Sunday of October at 2:00 AM." 
#From:gw.gm.25,Hexen II 
gw.gm.25,Hexen II 
#From:YM43,AIM Talk 
YM43,AIM Talk 
#From:YM45,ICQ 
YM45,ICQ 
#From:GW_SMTP_USERNAME_INVALID,User name is invalid 
GW_SMTP_USERNAME_INVALID,사용자 이름이 잘못되었습니다. 
#From:wps.KR37,Please select one of following configuration methods and click next to continue. 
wps.KR37,아래의 설정 방법 중 한 가지를 선택하고 다음 버튼을 눌러 계속 하십시오. 
#From:help362,Super G with Static Turbo 
help362,Super G with Static Turbo 
#From:tf.intro.FWChA,If you would like to be notified when new firmware is released, place a checkmark in the box next to Email Notification of Newer Firmware Version. 
tf.intro.FWChA,새로운 펌웨어 버전 이메일 알림 기능에 체크  표시를 하여 새로운 펌웨어가 나왔을 때 알림 서비스를 받을 수 있습니다.
#From:gw.gm.76,Gamespy Arcade 
gw.gm.76,Gamespy Arcade 
#From:help512,Extensible Authentication Protocol 
help512,Extensible Authentication Protocol 
#From:GW_LOGS_VIEWED,Log viewed by IP address %v 
GW_LOGS_VIEWED,IP 주소 %v 에서 로그 보기 
#From:hhsa.intro,This is a list of all active conversations between WAN computers and LAN computers. 
hhsa.intro,WAN 쪽 PC와 LAN 쪽 PC 간의 액티브 통신 리스트입니다. 
#From:bws.msg.EAP,When WPA enterprise is enabled, the router uses EAP (802.1x) to authenticate clients via a remote RADIUS server. 
bws.msg.EAP,WPA 엔터프라이즈 설정시, 원격 RADIUS 서버를 통해 클라이언트 인증을 위해 EAP(802.1x)를 사용합니다. 
#From:.remotedesktop,REMOTE DESKTOP 
.remotedesktop,원격 데스크탑 
#From:GW_PURE_DELETEPORTMAPPING_MODIFY,HNAP DeletePortMapping %s:%d modified %dth virtual server entry '%s' %v:%d<->%v:%d %S to %S 
GW_PURE_DELETEPORTMAPPING_MODIFY,HNAP DeletePortMapping %s:%d 가 %dth 가상 서버 엔트리 '%s' %v:%d<->%v:%d %S 를 %S 로 수정합니다.
#From:KR29,PIN (1st half) Mismatch Detected 
KR29,PIN (1st half) 이 맞지 않습니다. 
#From:help359,Super G Turbo Modes must use channel 6 for communication. For Super G with Static Turbo, <span class="option">802.11 Mode</span> must be set to 802.11g. For proper operation, RTS threshold and Fragmentation Threshold on the <a href="../Advanced/Advanced_Wireless.shtml">Advanced &rarr; Advanced Wireless</a> screen should both be set to their default values. 
help359,Super G Turbo Modes must use channel 6 for communication. For Super G with Static Turbo, <span class="option">802.11 Mode</span> must be set to 802.11g. For proper operation, RTS threshold and Fragmentation Threshold on the <a href="../Advanced/Advanced_Wireless.shtml">Advanced &rarr; Advanced Wireless</a> screen should both be set to their default values. 
#From:KR84,Configure the IP address of the preferred WINS server. 
KR84,선호 하는 WIN 서버 IP 주소를 설정하십시오. 
#From:help675,The most commonly used connection method for Ethernet 
help675,The most commonly used connection method for Ethernet 
#From:wprn.s2c,After clicking <em>Next</em>, you will be asked for permission to download an executable file. Please click 'OK' to download the the file.<br/><br/>To launch the executable, you may need to open the file-download folder using a file browser and double-click on the icon labeled <em>Printer_Setup.exe</em>. 
wprn.s2c,<em>다음</em> 버튼을 누른 후, 실행 파일을 다운로드할 수 있는 권한을 요청받습니다. 'OK' 버튼을 눌러 파일을 다운로드하십시오. <br/><br/>파일 브라우저를 사용하여 파일 다운로드 폴더를 열고 <em>Printer_Setup.exe</em> 를 더블 클릭하여 실행하십시오.
#From:help856,This section allows you to archive your log files to a Syslog Server. 
help856,This section allows you to archive your log files to a Syslog Server. 
#From:sa.Dir,Dir 
sa.Dir,Dir 
#From:.bln.title.IGMPMemberships,IGMP Multicast memberships 
.bln.title.IGMPMemberships,IGMP 멀티캐스트 멤버십
#From:YM30,DTIM should be between 1 and 255. 
YM30,DTIM은 1~ 255 입니다. 
#From:at.LoPortR,Local Port Range 
at.LoPortR,로컬 포트 범위
#From:GW_DHCP_SERVER_POOL_FROM_IN_SUBNET_INVALID,DHCP server pool FROM %v is not in LAN subnet %v. 
GW_DHCP_SERVER_POOL_FROM_IN_SUBNET_INVALID,DHCP 서버 풀의 FROM %v 이 LAN 서브넷 %v에 없습니다. 
#From:help399,Access Control List 
help399,Access Control List 
#From:help626,Network Basic Input/Output System 
help626,Network Basic Input/Output System 
#From:bwn.Mode.L2TP,L2TP (Username / Password) 
bwn.Mode.L2TP,L2TP (사용자명 / 비밀번호)
#From:.Thu,Thu 
.Thu,Thu 
#From:.ping,Ping 
.ping,Ping 
#From:GW_MAC_FILTER_MULTICAST_MAC_INVALID,MAC address filter can't be multicast address format: %m 
GW_MAC_FILTER_MULTICAST_MAC_INVALID,MAC 주소 필터가 멀티캐스트 주소 형식: %m 이 될 수 없습니다. 
#From:help184,Beacons are packets sent by a wireless router to synchronize wireless devices. Specify a Beacon Period value between 20 and 1000. The default value is set to 100 milliseconds. 
help184,Beacons are packets sent by a wireless router to synchronize wireless devices. Specify a Beacon Period value between 20 and 1000. The default value is set to 100 milliseconds. 
#From:GW_SMTP_INIT_FAILED_WARNING,<warn>Initialisation of email failed</warn> 
GW_SMTP_INIT_FAILED_WARNING,<warn>이메일 초기화에 실패하였습니다.</warn>
#From:GW_DHCPSERVER_STOP,DHCP server stopped 
GW_DHCPSERVER_STOP,DHCP 서버가 중단되었습니다. 
#From:.worksbest,Select the option that works best for your installation. 
.worksbest,설치에 가장 적합한 옵션을 선택하십시오.
#From:help350,To protect your privacy, use the wireless security mode to configure the wireless security features. This device supports three wireless security modes including: WEP, WPA-Personal, and WPA-Enterprise. WEP is the original wireless encryption standard. WPA provides a higher level of security. WPA-Personal does not require an authentication server. The WPA-Enterprise option does require a RADIUS authentication server. 
help350,To protect your privacy, use the wireless security mode to configure the wireless security features. This device supports three wireless security modes including: WEP, WPA-Personal, and WPA-Enterprise. WEP is the original wireless encryption standard. WPA provides a higher level of security. WPA-Personal does not require an authentication server. The WPA-Enterprise option does require a RADIUS authentication server. 
#From:.unavailable,unavailable 
.unavailable,사용할 수 없음.
#From:IPFAT_INCOMPATIBLE_FILESYS,Detected file system is not compatible (FAT32,FAT16,FAT12) 
IPFAT_INCOMPATIBLE_FILESYS,검색된 파일 시스템이 호환되지 않습니다. (FAT32,FAT16,FAT12)
#From:help320,It is possible for a computer or device that is manually configured to have an address that does reside within this range. In this case the address should be reserved (see <a href="#Static_DHCP">DHCP Reservation</a> below), so that the DHCP Server knows that this specific address can only be used by a specific computer or device. 
help320,It is possible for a computer or device that is manually configured to have an address that does reside within this range. In this case the address should be reserved (see <a href="#Static_DHCP">DHCP Reservation</a> below), so that the DHCP Server knows that this specific address can only be used by a specific computer or device. 
#From:GW_NAT_DMZ_NOT_ALLOWED_INVALID,DMZ address %v is not allowed. 
GW_NAT_DMZ_NOT_ALLOWED_INVALID,DMZ 주소 %v 가 허용되지 않습니다. 
#From:help813,The Internet Sessions page displays full details of active Internet sessions through your router. An Internet session is a conversation between a program or application on a LAN-side computer and a program or application on a WAN-side computer. 
help813,The Internet Sessions page displays full details of active Internet sessions through your router. An Internet session is a conversation between a program or application on a LAN-side computer and a program or application on a WAN-side computer. 
#From:YM143,When enabled, this option causes the router to automatically attempt to prioritize traffic streams that it doesn't otherwise recognize, based on the behavior that the streams exhibit. This acts to deprioritize streams that exhibit bulk transfer characteristics, such as file transfers, while leaving interactive traffic, such as gaming or VoIP, running at a normal priority. 
YM143,이 옵션을 활성화하면, 스트림을 표시하는 방식에 따라 확인하지 않는 트래픽 스트림에 공유기가 자동으로 우선권을 부여할 수 있습니다. 예를 들어, 파일 전송과 같은 용량을 많이 전송하는 벌크 트래픽은 우선 순위를 낮게하고 게임, VoIP 등에는 우선 순위를 높게 줄 수 있습니다.
#From:GW_XML_CONFIG_SET_FAILED,Failed to import configuration file #%u 
GW_XML_CONFIG_SET_FAILED,설정 파일 #%u 불러오기에 실패하였습니다. 
#From:GW_NAT_PORT_DUP_INVALID,%s '%s' of '%s' should not contain duplicated numbers. 
GW_NAT_PORT_DUP_INVALID,%s '%s' 의 '%s' 는 중복된 수가 포함되어서는 안됩니다. 
#From:help415,Antenna 
help415,Antenna 
#From:up.tz.04,(GMT-08:00) Pacific Time (US/Canada), Tijuana 
up.tz.04,(GMT-08:00) Pacific Time (US/Canada), Tijuana 
#From:sl.ApplySt,Apply Log Settings Now 
sl.ApplySt,Log Settings Now 적용 
#From:KR35,Step 1: Select Configuration Method for your Wireless Network 
KR35,Step 1: 무선 네트워크 설정 방법을 선택하십시오.
#From:GW_WAN_BIGPOND_PASSWORD_INVALID,A Big Pond password MUST be specified 
GW_WAN_BIGPOND_PASSWORD_INVALID,Big Pond 비밀번호를 반드시 지정하시기 바랍니다. 
#From:IPPPPCHAP_CHALLENGE_RECVD,CHAP authentication challenge received from peer. 
IPPPPCHAP_CHALLENGE_RECVD,Peer 에서 CHAP 인증 챌린저를 수신하였습니다. 
#From:YM57,Protocol must be specified. 
YM57,프로토콜을 반드시 지정하십시오. 
#From:help141,This section is where you add the Web sites to be used for Access Control. 
help141,This section is where you add the Web sites to be used for Access Control. 
#From:bd.Revoke,Revoke 
bd.Revoke,무효 
#From:help893,Select a dynamic DNS service provider from the pull-down list, or you may enter a dynamic DNS service provider manually. 
help893,Select a dynamic DNS service provider from the pull-down list, or you may enter a dynamic DNS service provider manually. 
#From:help533,A device that connects your network to another, like the internet 
help533,A device that connects your network to another, like the internet 
#From:.conuptime,Connection Up Time 
.conuptime,연결 시간
#From:wprn.intro3,Step 1: Detect the printer 
wprn.intro3,Step 1: 프린터가 검색되었습니다. 
#From:KR104,The router must be rebooted before the new settings will take effect. You can reboot now, or you can continue to make other changes and reboot later. 
KR104,새로운 설정을 적용하기 위해서는 반드시 공유기를 재시작하십시오. 바로 재시작하거나, 다른 것을 수정하고 나중에 재시작하셔도 됩니다. 
#From:wprn.tt4,Verify that the printer is turned on. 
wprn.tt4,프린터가 켜져 있는지 확인하십시오. 
#From:IPSMTPCLIENT_MSG_WRONG_SENDER_ADDR_FORMAT,sender email address is in wrong format 
IPSMTPCLIENT_MSG_WRONG_SENDER_ADDR_FORMAT,송신 이메일 주소의 형식이 잘못되었습니다. 
#From:help383,Wireless Networking technology enables ubiquitous communication 
help383,Wireless Networking technology enables ubiquitous communication 
#From:tsc.pingt.msg6,No response to ping from router, will retry. 
tsc.pingt.msg6,공유기에서 Ping 응답이 없습니다. 다시 시도하십시오. 
#From:LS317,Logout 
LS317,로그아웃
#From:help821a,Initiated from LAN to WAN. 
help821a,Initiated from LAN to WAN. 
#From:help572,A World Wide Web browser created and provided by Microsoft 
help572,A World Wide Web browser created and provided by Microsoft 
#From:PPPOE_EVENT_SESSION_OFFER_RECVD,PPPoE received session offer 
PPPOE_EVENT_SESSION_OFFER_RECVD,PPPoE 세션을 수신하였습니다. 
#From:YM102,The entered passwords do not match 
YM102,입력하신 비밀번호가 맞지 않습니다. 
#From:gw.gm.30,Myth 
gw.gm.30,Myth 
#From:bi.man,If you consider yourself an advanced user and have configured a router before, click <span class="button_ref">Manual Configure</span> to input all the settings manually. 
bi.man,공유기 설정에 익숙하시면 <span class="button_ref">Manual Configure</span> 를 눌러 설정을 직접하셔도 됩니다.
#From:help188,When WDS is enabled, this access point functions as a wireless repeater and is able to wirelessly communicate with other APs via WDS links. Note that WDS is incompatible with WPA -- both features cannot be used at the same time. A WDS link is bidirectional; so this AP must know the MAC Address (creates the WDS link) of the other AP, and the other AP must have a WDS link back to this AP. 
help188,When WDS is enabled, this access point functions as a wireless repeater and is able to wirelessly communicate with other APs via WDS links. Note that WDS is incompatible with WPA -- both features cannot be used at the same time. A WDS link is bidirectional; so this AP must know the MAC Address (creates the WDS link) of the other AP, and the other AP must have a WDS link back to this AP. 
#From:help557,A networking device that connects multiple devices together 
help557,A networking device that connects multiple devices together 
#From:.logsyslog.alert1,IP address is not valid 
.logsyslog.alert1,IP 주소가 잘못되었습니다. 
#From:help803,Select this option to save the router log to a file on your computer. 
help803,Select this option to save the router log to a file on your computer. 
#From:KR3,Invalid MAC address 
KR3,MAC 주소가 잘못되었습니다. 
#From:.aa.bsecure.hate,Hate 
.aa.bsecure.hate,Hate 
#From:GW_WLAN_11BG_CHANNEL_INVALID,Can not use 802.11a channel when the 802.11 mode is 802.11b/g. 
GW_WLAN_11BG_CHANNEL_INVALID,802.11 b/g 모드인 경우는 802.11a 채널을 사용할 수 없습니다.  
#From:help60,Mixed (1020-5000, 689) 
help60,혼합 포트(1020-5000, 689) 
#From:help468,Data Encryption Standard 
help468,Data Encryption Standard 
#From:RATE_ESTIMATOR_RATE_COMPLETED,Rate estimation completed 
RATE_ESTIMATOR_RATE_COMPLETED,속도 측정이 완료되었습니다. 
#From:wwl.alert.pv5.3,WEP key must be exactly 26 hexadecimal digits (0-9 or A-F). 
wwl.alert.pv5.3,WEP 키는 반드시 26자의  헥사값 (0-9 or A-F) 을 입력하십시오.
#From:ta.RAP,Remote Admin Port 
ta.RAP,원격 관리 포트 
#From:aw.aggr,Aggregation Limit 
aw.aggr,애그리게이션 제한
#From:help877,To check for the latest firmware, click the <span class="button_ref">Check Online Now</span> button. 
help877,To check for the latest firmware, click the <span class="button_ref">Check Online Now</span> button. 
#From:bwn.Mode.BigPond,BigPond (Australia) 
bwn.Mode.BigPond,BigPond (Australia) 
#From:.wifisc.addstart,Started 
.wifisc.addstart,시작
#From:tt.dststart,DST Start 
tt.dststart,DST 시작
#From:wprn.cps2,The current printer status will result in the test page failing to print later in the setup process.
wprn.cps2,현재 프린터 상태로 인해 설정 중에 테스트 페이지가 인쇄가 실패할 것입니다.
#From:help111,Specifies the interface -- WAN -- that the IP packet must use to transit out of the router, when this route is used. 
help111,Specifies the interface -- WAN -- that the IP packet must use to transit out of the router, when this route is used. 
#From:GW_QOS_RULES_REMOTE_IP_START_SUBNET,'%s': Remote IP start '%v' is in the LAN subnet 
GW_QOS_RULES_REMOTE_IP_START_SUBNET,%s': Remote IP start '%v'이 LAN 서브넷에 있습니다. 
#From:help164.1,When the protocol is TCP, SPI checks that packet sequence numbers are within the valid range for the session, discarding those packets that do not have valid sequence numbers. 
help164.1,When the protocol is TCP, SPI checks that packet sequence numbers are within the valid range for the session, discarding those packets that do not have valid sequence numbers. 
#From:help724,To send a request from one computer to another and have a file transmitted from the requesting computer to the other 
help724,To send a request from one computer to another and have a file transmitted from the requesting computer to the other 
#From:YM22,Invalid Destination Port End for Port Filter 
YM22,포트 필터의 목적지 마지막 포트가 잘못되었습니다. 
#From:up.tz.27,(GMT+01:00) Belgrade, Brastislava, Ljubljana 
up.tz.27,(GMT+01:00) Belgrade, Brastislava, Ljubljana 
#From:GW_WLAN_WDS_MAC_ADDR_INVALID,Can not use a multicast MAC address in WDS. 
GW_WLAN_WDS_MAC_ADDR_INVALID,WDS 에서는 멀티캐스트 MAC 주소를 사용할 수 없습니다. 
#From:LW10,Reset PIN to Default 
LW10,PIN을 디폴트로 리셋하십시오. 
#From:LT291,This area of the screen reflects configuration settings from the <a href="../Basic/Wireless.shtml">Setup &rarr; Wireless Settings</a> page. The <span class="option">MAC Address</span> is the factory-assigned identifier of the wireless card. 
LT291,<a href="../Basic/Wireless.shtml">Setup &rarr; Wireless Settings</a> 페이지에서 설정한 설정 값이 반영됩니다. <span class="option">MAC Address</span> 는 무선 카드 제조사에서 할당한 주소입니다.
#From:YM156,This section is where you define WISH Rules. 
YM156,여기에서 WISH 규칙을 정의할 수 있습니다. 
#From:.aa.bsecure.age.ado,Adolescent (9-12) 
.aa.bsecure.age.ado,청소년(9-12)
#From:help648,A utility program that verifies that a given Internet address exists and can receive messages. The utility sends a control packet to the given address and waits for a response. 
help648,A utility program that verifies that a given Internet address exists and can receive messages. The utility sends a control packet to the given address and waits for a response. 
#From:wwl.text.good,Select this option if your wireless adapters DO NOT SUPPORT WPA 
wwl.text.good,무선 랜카드가 WPA를 지원하지 않는 경우 이 옵션을 선택하십시오. 
#From:wt.title,Please wait 
wt.title,기다리십시오. 
#From:sl.emailLog,Email Now 
sl.emailLog,Email Now 
#From:GW_QOS_RULES_PRIORITY_RANGE,'%s': Priority, %d, needs to be between 1 and 255 
GW_QOS_RULES_PRIORITY_RANGE,%s': 우선순위 %d 는 1~255 입니다. 
#From:bwl.title.1,Wireless Network Settings 
bwl.title.1,무선 네트워크 설정
#From:YM134,Once a LAN-side application has created a connection through a specific port, the NAT will forward any incoming connection requests with the same port to the LAN-side application regardless of their origin. This is the least restrictive option, giving the best connectivity and allowing some applications (P2P applications in particular) to behave almost as if they are directly connected to the Internet. 
YM134,LAN 쪽 응용프로그램이 특정 포트를 통해 연결이 이루어지면 바로,   패킷 출발지에 상관 없이 NAT가 LAN 쪽 응용프로그램과 같은 포트로 모든 수신 연결 요청을 포워드합니다. 이것은 최소 제한 옵션으로, 일부 응용프로그램(특히 P2P 응용프로그램) 을 허용해서 최고의 연결성을 제공하여 인터넷에 직접 연결되어 있는 것처럼 동작합니다. 
#From:.aa.bsecure.web_mail,Web Mail 
.aa.bsecure.web_mail,웹메일
#From:bwn.BPP,BigPond Password 
bwn.BPP,BigPond 비밀번호
#From:help74,With the above example values filled in and this Port Forwarding Rule enabled, all TCP and UDP traffic on ports 6159 through 6180 and port 99 is passed through the router and redirected to the Internal Private IP Address of your Game Server at 192.168.0.50. 
help74,With the above example values filled in and this Port Forwarding Rule enabled, all TCP and UDP traffic on ports 6159 through 6180 and port 99 is passed through the router and redirected to the Internal Private IP Address of your Game Server at 192.168.0.50. 
#From:help188b,Make sure the APs are configured with same channel number. 
help188b,Make sure the APs are configured with same channel number. 
#From:sl.reload,Refresh 
sl.reload,갱신
#From:wwl.title.s1,Step 1: Name your Wireless Network 
wwl.title.s1,Step 1: 무선 네트워크에 이름을 부여하십시오. 
#From:IPDRIVE_MOUNT_FAILED,Failed to mount drive device 
IPDRIVE_MOUNT_FAILED,드라이버 마운트에 실패하였습니다. 
#From:int.ConWz,Internet Connection Setup Wizard 
int.ConWz,인터넷 연결 설정 마법사 
#From:at.title.Traff,WAN Traffic Shaping 
at.title.Traff,WAN 트래픽 세이핑
#From:help178,Permit any WAN user to access the related capability. 
help178,Permit any WAN user to access the related capability. 
#From:help189,Specifies one-half of the WDS link. The other AP must also have the MAC address of this AP to create the WDS link back to this AP. 
help189,Specifies one-half of the WDS link. The other AP must also have the MAC address of this AP to create the WDS link back to this AP. 
#From:GW_WIRELESS_SWITCH_CHANNEL,Wireless radar detected, switch to channel %d 
GW_WIRELESS_SWITCH_CHANNEL,무선이 검색 되어 %d 을 변경합니다. 
#From:help657,Point-to-Point Tunneling Protocol is used for creating VPN tunnels over the Internet between two networks 
help657,Point-to-Point Tunneling Protocol is used for creating VPN tunnels over the Internet between two networks 
#From:help329,The <code>Revoke</code> option is available for the situation in which the lease table becomes full or nearly full, you need to recover space in the table for new entries, and you know that some of the currently allocated leases are no longer needed. Clicking <code>Revoke</code> cancels the lease for a specific LAN device and frees an entry in the lease table. Do this only if the device no longer needs the leased IP address, because, for example, it has been removed from the network. 
help329,The <code>Revoke</code> option is available for the situation in which the lease table becomes full or nearly full, you need to recover space in the table for new entries, and you know that some of the currently allocated leases are no longer needed. Clicking <code>Revoke</code> cancels the lease for a specific LAN device and frees an entry in the lease table. Do this only if the device no longer needs the leased IP address, because, for example, it has been removed from the network. 
#From:IPL2TP_TUNNEL_DISCONNECTED,L2TP local tunnel 0x%04X has been disconnected 
IPL2TP_TUNNEL_DISCONNECTED,L2TP 로컬 터널 0x%04X 이 끊어졌습니다. 
#From:help830,Remote Admin Inbound Filter 
help830,Remote Admin Inbound Filter 
#From:help294,The Maximum Transmission Unit (MTU) is a parameter that determines the largest packet size (in bytes) that the router will send to the WAN. If LAN devices send larger packets, the router will break them into smaller packets. Ideally, you should set this to match the MTU of the connection to your ISP. Typical values are 1500 bytes for an Ethernet connection and 1492 bytes for a PPPoE connection. If the router's MTU is set too high, packets will be fragmented downstream. If the router's MTU is set too low, the router will fragment packets unnecessarily and in extreme cases may be unable to establish some connections. In either case, network performance can suffer. 
help294,The Maximum Transmission Unit (MTU) is a parameter that determines the largest packet size (in bytes) that the router will send to the WAN. If LAN devices send larger packets, the router will break them into smaller packets. Ideally, you should set this to match the MTU of the connection to your ISP. Typical values are 1500 bytes for an Ethernet connection and 1492 bytes for a PPPoE connection. If the router's MTU is set too high, packets will be fragmented downstream. If the router's MTU is set too low, the router will fragment packets unnecessarily and in extreme cases may be unable to establish some connections. In either case, network performance can suffer. 
#From:up.tz.21,(GMT-02:00) Mid-Atlantic 
up.tz.21,(GMT-02:00) Mid-Atlantic 
#From:help482,dBm 
help482,dBm 
#From:GW_WAN_BIGPOND_SERVER_INVALID,A Big Pond server MUST be specified 
GW_WAN_BIGPOND_SERVER_INVALID,Big Pond 서버를 반드시 명시하십시오. 
#From:GW_XML_CONFIG_SET_PARSE,Configuration file parse error around line %u char %u 
GW_XML_CONFIG_SET_PARSE,설정 파일이 라인 %u char %u 주변의 에러를 검색합니다. 
#From:help679,Algorithm used for encryption and authentication 
help679,Algorithm used for encryption and authentication 
#From:YM125,Enabling Hidden Mode is another way to secure your network. With this option enabled, no wireless clients will be able to see your wireless network when they scan to see what's available. For your wireless devices to connect to your router, you will need to manually enter the Wireless Network Name on each device. 
YM125,무선 네트워크 이름(SSID) 숨김(Hidden Mode) 설정으로 무선 네트워크에 보안을 제공합니다. 이 옵션을 설정하면, 무선 네트워크 클라이언트가 SSID 검색으로 찾는 것을 방지할 수 있습니다. 공유기에 연결하기 위해서 무선 클라이언트에서 직접 무선 네트워크 이름을 설정하시기 바랍니다. 
#From:GW_BIGPOND_SUCCESS,BigPond logged in, state=%d, server response=%s 
GW_BIGPOND_SUCCESS,BigPond logged in, state=%d, server response=%s 
#From:.denyall,Deny All 
.denyall,모두 거부
#From:at.AC,Automatic Classification 
at.AC,자동 분류
#From:bwl.VS,Visibility Status 
bwl.VS,무선 네트워크 이름 숨김
#From:help327,In this section you can see what LAN devices are currently leasing IP addresses. 
help327,In this section you can see what LAN devices are currently leasing IP addresses. 
#From:td.,(hours) 
td.,(시간)
#From:wprn.s2a,To complete the setup process, the wizard will now launch an executable file on your computer. 
wprn.s2a,설정 완료를 위해, 마법사가 실행 파일을 시작합니다. 
#From:LT290wifisc,This area of the screen reflects configuration settings from the <a href="../Basic/Wireless.shtml">Setup &rarr; Wireless Settings</a> page, the <a href="../Advanced/WISH.shtml">Advanced &rarr; WISH</a> page and the <a href="../Advanced/Protected_Setup.shtml">Advanced &rarr; Wi-Fi Protected Setup</a> page. The <span class="option">MAC Address</span> is the factory-assigned identifier of the wireless card. 
LT290wifisc,<a href="../Basic/Wireless.shtml">Setup &rarr; Wireless Settings</a> 와 <a href="../Advanced/WISH.shtml">Advanced &rarr; WISH</a> page and the <a href="../Advanced/Protected_Setup.shtml">Advanced &rarr; Wi-Fi Protected Setup</a> 페이지에서 설정한 내용이 여기에 반영됩니다.  <span class="option">MAC Address</span> 는 제조사에서 할당한 무선 카드의 MAC 주소입니다. 
#From:GW_FIREWALL_RULE_NAME_INVALID,Rule name can not be empty string 
GW_FIREWALL_RULE_NAME_INVALID,방화벽 정책 명이 공백이어서는 안됩니다. 
#From:PPTP_EVENT_TUNNEL_WINDOW_TIMEOUT,The remote PPTP access concentrator is slow to respond. There may be connectivity problems. 
PPTP_EVENT_TUNNEL_WINDOW_TIMEOUT,원격지 PPTP 접속 집선 장치의 응답이 느립니다.  연결에 문제가 있을 수도 있습니다. 
#From:aw.TP,Transmit Power 
aw.TP,출력 파워
#From:GW_NAT_SCHEDULE,Schedule 
GW_NAT_SCHEDULE,스케쥴
#From:help109,Specifies the next hop to be taken if this route is used. A gateway of 0.0.0.0 implies there is no next hop, and the IP address matched is directly connected to the router on the interface specified: WAN. 
help109,Specifies the next hop to be taken if this route is used. A gateway of 0.0.0.0 implies there is no next hop, and the IP address matched is directly connected to the router on the interface specified: WAN. 
#From:GW_LAN_RIP_MODE_INVALID,RIP mode is invalid. 
GW_LAN_RIP_MODE_INVALID,RIP 모드가 잘못되었습니다. 
#From:bwn.SIAICT,Static IP Address Internet Connection Type 
bwn.SIAICT,고정 IP 주소 인터넷 연결 종류
#From:LW52,The wireless transmitter will begin to send RTS frames (and wait for CTS) when data frame size in bytes is greater than the RTS Threshold. 
LW52,데이터 프레임 크기가 RTS 값 보다 클 경우, 무선 송신 장치가 RTS 프레임을 보내기 시작하고 CTS 프레임을 기다립니다. 
#From:help57,Multiple connections are required by some applications, such as internet games, video conferencing, Internet telephony, and others. These applications have difficulties working through NAT (Network Address Translation). This section is used to open multiple ports or a range of ports in your router and redirect data through those ports to a single PC on your network. You can enter ports in various formats: 
help57,Multiple connections are required by some applications, such as internet games, video conferencing, Internet telephony, and others. These applications have difficulties working through NAT (Network Address Translation). This section is used to open multiple ports or a range of ports in your router and redirect data through those ports to a single PC on your network. You can enter ports in various formats: 
#From:bd.EDSv,Enable DHCP Server 
bd.EDSv,DHCP 서버 설정
#From:.sdi.s5,Disconnecting (please wait...) 
.sdi.s5,연결이 끊어집니다.(기다려 주세요…) 
#From:tt.time.3,2 am 
tt.time.3,2 am 
#From:wprn.man,Manufacturer 
wprn.man,제조사
#From:.aa.bsecure.popups,Pop-ups 
.aa.bsecure.popups,팝업
#From:bwn.note.clientSW,If using the PPPoE option, you will need to remove or disable any PPPoE client software on your computers. 
bwn.note.clientSW,PPPoE 옵션을 사용하시면, PC 에서 PPPoE 클라이언트 소프트웨어 프로그램을 삭제하시기 바랍니다.     
#From:up.tz.20,(GMT-03:00) Greenland 
up.tz.20,(GMT-03:00) Greenland 
#From:GW_WLAN_WPA_WPA2_TKIP_INVALID,WPA2 only mode doesn't support TKIP. 
GW_WLAN_WPA_WPA2_TKIP_INVALID,WPA2 only 모드는 TKIP를 지원하지 않습니다. 
#From:KR16,2.4GHz 
KR16,2.4GHz 
#From:RIP_LOW_RESOURCES,RIP has rejected route %v from peer router %v due to low system resources 
RIP_LOW_RESOURCES,시스템 리소스가 낮아서  %v from peer router %v 루트를 거부하였습니다.
#From:help266,Service Name: 
help266,Service Name: 
#From:.vs.title,Virtual Server 
.vs.title,가상 서버
#From:help155.2,When "OFF" is selected, MAC addresses are not used to control network access. When "ALLOW" is selected, only computers with MAC addresses listed in the MAC Address List are granted network access. When "DENY" is selected, any computer with a MAC address listed in the MAC Address List is refused access to the network. 
help155.2,When "OFF" is selected, MAC addresses are not used to control network access. When "ALLOW" is selected, only computers with MAC addresses listed in the MAC Address List are granted network access. When "DENY" is selected, any computer with a MAC address listed in the MAC Address List is refused access to the network. 
#From:GW_WAN_PPPOE_USERNAME_INVALID,A PPPoE user name MUST be specified 
GW_WAN_PPPOE_USERNAME_INVALID,PPPoE 사용자 명을 반드시 지정하십시오. 
#From:CONNECTED,Connected 
CONNECTED,연결되었습니다. 
#From:help265.5,If your ISP has assigned a fixed IP address, select this option. The ISP provides the values for the following fields: 
help265.5,If your ISP has assigned a fixed IP address, select this option. The ISP provides the values for the following fields: 
#From:GW_WAN_PPTP_SUBNET_INVALID,Invalid PPTP subnet mask %v 
GW_WAN_PPTP_SUBNET_INVALID,PPTP 서브넷 마스크 %v 가 잘못되었습니다. 
#From:GW_DHCP_SERVER_NETBIOS_SCOPE_INVALID,NetBIOS Scope is not in a valid form 
GW_DHCP_SERVER_NETBIOS_SCOPE_INVALID,NetBIOS 범위(scope)의 형식이 잘못되었습니다. 
#From:KR94,Static IP mode is always on, so no action buttons are avaliable. 
KR94,고정 IP 모드는 항상 설정 상태입니다. 따라서 설정 버튼이 따로 없습니다. 
#From:tsc.Days,Day(s) 
tsc.Days,Day(s) 
#From:YM63,WISH 
YM63,WISH 
#From:help108,Gateway: 
help108,Gateway: 
#From:help431,The ability for new devices to communicate and interact with older legacy devices to guarantee interoperability 
help431,The ability for new devices to communicate and interact with older legacy devices to guarantee interoperability 
#From:up.tz.13,(GMT-05:00) Indiana (East) 
up.tz.13,(GMT-05:00) Indiana (East) 
#From:sd.General,General 
sd.General,일반
#From:GW_SCHEDULES_DUPLICATED_INVALID,This schedule is already used in '%s' 
GW_SCHEDULES_DUPLICATED_INVALID,스케쥴이 '%s' 에서 이미 사용중입니다. 
#From:hhan.upnp,UPnP helps other UPnP LAN hosts interoperate with the router. Leave the UPnP option enabled as long as the LAN has other UPnP applications. 
hhan.upnp,UPnP는 공유기와 다른 UPnP LAN 클라이언트와 통신하도록 도와 줍니다. LAN 상에 다른 UPnP 응용프로그램이 있으면 UPnP 옵션을 설정 상태로 두십시오. 
#From:help35,Check with the system administrator of your corporate network whether your VPN client supports NAT traversal. 
help35,Check with the system administrator of your corporate network whether your VPN client supports NAT traversal. 
#From:help18,The IP address of the system on your internal network that will provide the virtual service, for example <code>192.168.0.50</code>. 
help18,The IP address of the system on your internal network that will provide the virtual service, for example <code>192.168.0.50</code>. 
#From:bwz.psw,Printer Setup Wizard 
bwz.psw,프린터 설정 마법사
#From:tt.DaT,Date And Time 
tt.DaT,날짜와 시간
#From:help190,Schedules can be created for use with enforcing rules. For example, if you want to restrict web access to Mon-Fri from 3pm to 8pm, you could create a schedule selecting Mon, Tue, Wed, Thu, and Fri and enter a Start Time of 3pm and End Time of 8pm. 
help190,Schedules can be created for use with enforcing rules. For example, if you want to restrict web access to Mon-Fri from 3pm to 8pm, you could create a schedule selecting Mon, Tue, Wed, Thu, and Fri and enter a Start Time of 3pm and End Time of 8pm. 
#From:bws.WPAM.1,WPA Only 
bws.WPAM.1,WPA Only 
#From:KR11,Public port should be in range (1..65535) for virtual server 
KR11,가상 서버용 공인 포트 범위는 1 ~  65535 입니다. 
#From:help819.2,SYN Sent -- One of the systems is attempting to start a connection. 
help819.2,SYN Sent -- One of the systems is attempting to start a connection. 
#From:LW45,If you already have a wireless network setup with Wi-Fi Protected Setup, click on <strong>Add Wireless Device Wizard</strong> to add new device to your wireless network. 
LW45,Wi-Fi Protected 설정으로 설정한 무선 네트워크가 이미 있으면, <strong>WPS 무선장비 추가</strong>  버튼을 눌러 무선 네트워크에 새 장비를 추가하십시오.
#From:help560,Institute of Electrical and Electronics Engineers 
help560,Institute of Electrical and Electronics Engineers 
#From:bwn.MIT,Maximum Idle Time 
bwn.MIT,최대 휴지(idle) 시간
#From:hhai.name,Give each rule a <strong>Name</strong> that is meaningful to you. 
hhai.name,각 규칙에 의미 있는 <strong>이름</strong> 을 부여하십시오. 
#From:te..title.EmLog,Email log when FULL or on Schedule 
te..title.EmLog,FULL 또는 스케쥴에 맞는 경우 이메일 로그 
#From:help742,Windows Connect Now. A Microsoft method for configuring and bootstrapping wireless networking hardware (access points) and wireless clients, including PCs and other devices. 
help742,Windows Connect Now. A Microsoft method for configuring and bootstrapping wireless networking hardware (access points) and wireless clients, including PCs and other devices. 
#From:up.tz.47,(GMT+05:30) Calcutta, Chennai, Mumbai, New Delhi 
up.tz.47,(GMT+05:30) Calcutta, Chennai, Mumbai, New Delhi 
#From:KR6,Remote IP End 
KR6,원격지 마지막 IP 주소
#From:GW_DHCP_SERVER_NETBIOS_TYPE_INVALID,Invalid NetBIOS registration type 
GW_DHCP_SERVER_NETBIOS_TYPE_INVALID,NetBIOS 등록 종류가 잘못되었습니다. 
#From:help449,A wide band of frequencies available for transmitting data 
help449,A wide band of frequencies available for transmitting data 
#From:IPSMTPCLIENT_DIALOG_FAILED,SMTP failed during sender/recipient dialog 
IPSMTPCLIENT_DIALOG_FAILED,송/수신 중에 SMTP가 실패하였습니다. 
#From:hham.del,Click the <strong>Clear</strong> button to remove the MAC address from the MAC Filtering list. 
hham.del,<strong>삭제</strong> 버튼을 눌러 MAC 필터링 리스트에서 MAC 주소를 삭제하십시오. 
#From:.aa.bsecure.games,Games 
.aa.bsecure.games,게임
#From:wwa.msg.ispnot,If your Internet Service Provider was not listed or you don't know who it is, please select the Internet connection type below: 
wwa.msg.ispnot,가입하신 인터넷 서비스 공급자(ISP) 가 리스트에 없거나 ISP가 어디인지를 모르시면, 아래에 있는 인터넷 연결 유형을 선택하십시오. 
#From:help808,The number of packets that were dropped while being sent, due to errors, collisions, or router resource limitations. 
help808,The number of packets that were dropped while being sent, due to errors, collisions, or router resource limitations. 
#From:PPTP_EVENT_TUNNEL_ESTABLISH_REQUEST,Attempting to establish a PPTP connection. 
PPTP_EVENT_TUNNEL_ESTABLISH_REQUEST,PPTP 연결 시도 
#From:help37,Supports use on LAN computers of Microsoft Windows Messenger (the Internet messaging client that ships with Microsoft Windows) and MSN Messenger. The SIP ALG must also be enabled when the Windows Messenger ALG is enabled. 
help37,Supports use on LAN computers of Microsoft Windows Messenger (the Internet messaging client that ships with Microsoft Windows) and MSN Messenger. The SIP ALG must also be enabled when the Windows Messenger ALG is enabled. 
#From:WCN_LOG_REBOOT,Reboot requested for WCN 
WCN_LOG_REBOOT,WCN 재시작 요청 
#From:YM104,Invalid Idle Time 
YM104,휴지(Idle) 타임이 잘못되었습니다. 
#From:.aa.bsecure.tickets,Tickets 
.aa.bsecure.tickets,티켓
#From:PPTP_EVENT_TUNNEL_CONNECT_FAIL,PPTP connection attempt failed. Check remote PPTP server details. 
PPTP_EVENT_TUNNEL_CONNECT_FAIL,PPTP 연결 시도가 실패하였습니다. 원격지 PPTP 서버를 자세히 확인하십시오. 
#From:bwl.CWM,Channel Width 
bwl.CWM,채널 간격
#From:up.tz.12,(GMT-05:00) Eastern Time (US/Canada) 
up.tz.12,(GMT-05:00) Eastern Time (US/Canada) 
#From:help565,IKE 
help565,IKE 
#From:ta.EUPNP,Enable UPnP 
ta.EUPNP,UPnP 설정
#From:.cancel,Cancel 
.cancel,취소
#From:help473,Organizes information so that it can be managed updated, as well as easily accessed by users or applications. 
help473,Organizes information so that it can be managed updated, as well as easily accessed by users or applications. 
#From:bln.EnDNSRelay,Enable DNS Relay 
bln.EnDNSRelay,DNS 릴레이 설정
#From:up.tz.38,(GMT+03:00) Kuwait, Riyadh 
up.tz.38,(GMT+03:00) Kuwait, Riyadh 
#From:aw.DI,DTIM Interval 
aw.DI,DTIM 주기
#From:up.tz.31,(GMT+02:00) Athens, Istanbul, Minsk 
up.tz.31,(GMT+02:00) Athens, Istanbul, Minsk 
#From:bd.NETBIOS_REG_TYPE_M,Mixed-mode (Broadcast then Point-to-Point) 
bd.NETBIOS_REG_TYPE_M,혼합 모드 (Broadcast then Point-to-Point)
#From:help189a,Enter a MAC address for each of the other APs that you want to connect with WDS. 
help189a,Enter a MAC address for each of the other APs that you want to connect with WDS. 
#From:GW_UPNP_IGD_PORTMAP_DEL,UPnP deleted entry %v <-> %v:%d %s 
GW_UPNP_IGD_PORTMAP_DEL,UPnP가  %v <-> %v:%d %s 를 삭제하였습니다. 
#From:hhai.delete,Click the <strong>Delete</strong> icon in the Rules List to permanently remove a rule. 
hhai.delete,<strong>Delete</strong> 아이콘을 눌러 정책 리스트(Rules List)에 있는 규칙을 완전히 삭제하십시오. 
#From:YM111,Invalid L2TP gateway IP address 
YM111,L2TP 게이트웨이 IP 주소가 잘못되었습니다. 
#From:GW_WAN_RECONNECT_ALWAYS_ON,Attempting to re-connect always-on WAN connection 
GW_WAN_RECONNECT_ALWAYS_ON,항상(always-on) WAN 연결 재시도 
#From:av.intro.vs,The Virtual Server option allows you to define a single public port on your router for redirection to an internal LAN IP Address and Private LAN port if required. This feature is useful for hosting online services such as FTP or Web Servers. 
av.intro.vs,가상 서버 옵션으로 공유기에 내부 IP 주소와 사설 LAN 포트로 한개의 공인 포트를 중계(redirection) 하도록 설정 할 수 있습니다. FTP 또는 웹서버와 같은 온라인 서비스를 호스팅하는 경우에 유용한 기능입니다.
#From:LS315,Disconnect 
LS315,연결이 끊겼습니다. 
#From:INGRESS,In 
INGRESS,In 
#From:wwl.WSP,Wireless Security Password 
wwl.WSP,무선 보안 비밀번호
#From:GW_WLAN_WPA_PSK_LEN_INVALID,Incorrect key length, should be 8 to 63 characters long. 
GW_WLAN_WPA_PSK_LEN_INVALID,키(key) 길이가 잘못 되었습니다. 키 길이는 반드시 8 ~ 63 문자로 해 주십시오. 
#From:LW24,Personal 
LW24,Personal 
#From:RESTRICTED,Restricted 
RESTRICTED,Restricted 
#From:help599,Legacy 
help599,Legacy 
#From:bwn.msg.DHCPDesc,Use this Internet connection type if your Internet Service Provider (ISP) didn't provide you with IP Address information and/or a username and password. 
bwn.msg.DHCPDesc,인터넷 서비스 제공업체(ISP) 에서 IP 주소 정보 또는 사용자명과 비밀번호를 받지 못한 경우, 이 인터넷 연결 유형을 사용하십시오. 
#From:YM167,Getting active session list. Please wait 
YM167,액티브 세션 리스트를 받고 있습니다. 잠시만 기다려 주십시오. 
#From:help828,Enabling Remote Management allows you to manage the router from anywhere on the Internet. Disabling Remote Management allows you to manage the router only from computers on your LAN. 
help828,Enabling Remote Management allows you to manage the router from anywhere on the Internet. Disabling Remote Management allows you to manage the router only from computers on your LAN. 
#From:help371,128-bit ASCII keys are up to 13 characters in length (2002HALOSWIN1 is a valid string of 13 characters for 128-bit encryption.) 
help371,128-bit ASCII keys are up to 13 characters in length (2002HALOSWIN1 is a valid string of 13 characters for 128-bit encryption.) 
#From:help390,The port number used to connect to the authentication server. 
help390,The port number used to connect to the authentication server. 
#From:.aa.bsecure.anarchy,Anarchy 
.aa.bsecure.anarchy,Anarchy 
#From:YM4,Reboot Later 
YM4,나중에 재시작하십시오.
#From:.aa.bsecure.criminal_skills,Criminal Skills 
.aa.bsecure.criminal_skills,Criminal Skills 
#From:YM188,Warnings have been raised as a result of configuration changes.\nThe system is unable to generate a list of those warnings right now, but will retry. 
YM188,설정 변경의 결과로 경고 메시지를 받았습니다. \n 지금 경고 메시지 리스트를 생성할 수 없습니다. 다시 시도해 주십시오.
#From:help867,Re-type the password associated with the account. 
help867,Re-type the password associated with the account. 
#From:YM133,The NAT Endpoint Filtering options control how the router's NAT manages incoming connection requests to ports that are already being used. 
YM133,NAT 엔드포인트 필터링 옵션으로 공유기의 NAT 기능이 이미 사용중인 포트로 수신 연결 요청 하는 방법을 제어할 수 있습니다.
#From:GW_WAN_CONNECT_ALWAYS_ON,Attempting to start always-on WAN connection 
GW_WAN_CONNECT_ALWAYS_ON,항상 WAN 연결 시작 시도 
#From:IPRTSPALG_REJECTED_ODD_RTP_PACKET,RTSP ALG rejected packet from %v:%u to %v:%u with odd RTP port %u 
IPRTSPALG_REJECTED_ODD_RTP_PACKET,RTSP ALG가 %v:%u 에서 %v:%u로의 비정상 RTP 포트 %u를 차단하였습니다.  
#From:YM59,Local start port should be between 0 and 65535 inclusive. 
YM59,로컬 시작 포트는 0 ~ 65535(포함) 입니다. 
#From:help60f,Port Forwarding Fields 
help60f,Port Forwarding Fields 
#From:help585,IPX 
help585,IPX 
#From:.aa.bsecure.manually,Manually 
.aa.bsecure.manually,수동으로
#From:gw.gm.10,Counter Strike 
gw.gm.10,Counter Strike 
#From:bwn.min,(minutes, 0=infinite) 
bwn.min,(minutes, 0=infinite) 
#From:.sdi.s4,Established: Rate Estimating 
.sdi.s4,연결: 속도 측정
#From:help530,Sending and Receiving data at the same time 
help530,Sending and Receiving data at the same time 
#From:tt.Month,Month 
tt.Month,월
#From:YM169,Email address is not configured. 
YM169,이메일 주소가 설정되지 않았습니다. 
#From:help623,NetBEUI 
help623,NetBEUI 
#From:wwz.wpa.support,Use WPA encryption instead of WEP(WPA is stronger than WEP and all D-Link wireless client adapters support WPA) 
wwz.wpa.support,WEP 대신 WPA 암호를 사용하십시오.(WPA는 WEP 보다 더 강력한 암호화 방식이고 모든 D-Link 무선 카드들이 WPA를 지원합니다.)
#From:tf.CFWD,Current Firmware Date 
tf.CFWD,현재 펌웨어 일자
#From:YM97,Use this section to configure the internal network settings of your router. The IP Address that is configured here is the IP Address that you use to access the Web-based management interface. If you change the IP Address here, you may need to adjust your PC's network settings to access the network again. 
YM97,공유기의 내부 네트워크를 설정하십시오. 설정하신 IP 주소는 웹 관리 인터페이스로 접속하는데 사용됩니다. 여기에서 IP 주소를 변경하시면, 네트워크에 다시 접속하기 위해서 PC의 네트워크 설정을 변경하신 네트워크 주소에 맞추어 주시기 바랍니다. 
#From:.advnetwork,Advanced Network 
.advnetwork,고급 네트워크
#From:at.ESE,Enable QoS Engine 
at.ESE,QoS 엔진 설정
#From:bwn.PPPOEICT,PPPOE Internet Connection Type 
bwn.PPPOEICT,PPPoE 인터넷 연결 유형
#From:help844,Select the time offset, if your location observes daylight saving time. 
help844,Select the time offset, if your location observes daylight saving time. 
#From:help389,RADIUS Server Port: 
help389,RADIUS Server Port: 
#From:tt.time.17,4 pm 
tt.time.17,4 pm 
#From:help284,L2TP (Layer Two Tunneling Protocol) uses a virtual private network to connect to your ISP. This method of connection requires you to enter a <span class="option">Username</span> and <span class="option">Password</span> (provided by your Internet Service Provider) to gain access to the Internet. 
help284,L2TP (Layer Two Tunneling Protocol) uses a virtual private network to connect to your ISP. This method of connection requires you to enter a <span class="option">Username</span> and <span class="option">Password</span> (provided by your Internet Service Provider) to gain access to the Internet. 
#From:GW_WIRELESS_DEVICE_ASSOCIATED,Wireless system with MAC address %m associated 
GW_WIRELESS_DEVICE_ASSOCIATED,MAC 주소가 %m 인 무선 시스템이 연결되었습니다.  
#From:bws.2RMAA,Second MAC Address Authentication 
bws.2RMAA,2차 MAC 주소 인증 
#From:as.SIP,SIP 
as.SIP,SIP 
#From:help704,Syslog 
help704,Syslog 
#From:help758,WLAN 
help758,WLAN 
#From:up.tz.25,(GMT) Greenwich Time: Dublin, Edinburgh, Lisbon, London 
up.tz.25,(GMT) Greenwich Time: Dublin, Edinburgh, Lisbon, London 
#From:help634,NIC 
help634,NIC 
#From:help55,With the above example application rule enabled, the router will open up a range of ports from 6000-6200 for incoming traffic from the Internet, whenever any computer on the internal network opens up an application that sends data to the Internet using a port in the range of 6500-6700. 
help55,With the above example application rule enabled, the router will open up a range of ports from 6000-6200 for incoming traffic from the Internet, whenever any computer on the internal network opens up an application that sends data to the Internet using a port in the range of 6500-6700. 
#From:GW_WLAN_LINK_UP,Wireless Link is up 
GW_WLAN_LINK_UP,무선 링크가 연결되었습니다. 
#From:.aa.bsecure.age.child,Child (0-8) 
.aa.bsecure.age.child,어린이 (0-8)
#From:help752,The larger network that your LAN is connected to, which may be the Internet itself, or a regional or corporate network 
help752,The larger network that your LAN is connected to, which may be the Internet itself, or a regional or corporate network 
#From:td.EnDDNS,Enable Dynamic DNS 
td.EnDDNS,Dynamic DNS 설정
#From:help375,WPA is the older standard; select this option if the clients that will be used with the router only support the older standard. WPA2 is the newer implementation of the stronger IEEE 802.11i security standard. With the "WPA2" option, the router tries WPA2 first, but falls back to WPA if the client only supports WPA. With the "WPA2 Only" option, the router associates only with clients that also support WPA2 security. 
help375,WPA is the older standard; select this option if the clients that will be used with the router only support the older standard. WPA2 is the newer implementation of the stronger IEEE 802.11i security standard. With the "WPA2" option, the router tries WPA2 first, but falls back to WPA if the client only supports WPA. With the "WPA2 Only" option, the router associates only with clients that also support WPA2 security. 
#From:help575,Internet Protocol Security 
help575,Internet Protocol Security 
#From:ai.title.IFR,Inbound Filter Rule 
ai.title.IFR,수신 필터 규칙
#From:GW_WEB_FILTER_WEBSITE_INVALID_INVALID,This web site address '%s' is invalid. 
GW_WEB_FILTER_WEBSITE_INVALID_INVALID,웹사이트 주소 '%s' 가 유효하지 않습니다. 
#From:ZM21,Week 
ZM21,주
#From:.PPTP,PPTP 
.PPTP,PPTP 
#From:.both,Both 
.both,Both 
#From:YM157,Internet Sessions 
YM157,인터넷 세션
#From:up.tz.40,(GMT+03:00) Nairobi 
up.tz.40,(GMT+03:00) Nairobi 
#From:wprn.tt8,Unplug and reinsert the printer's USB cable. 
wprn.tt8,프린터의 USB 케이블을 빼서 다시 꽂으십시오. 
#From:help213,The WCN ActiveX Control provides the WCN link between your PC and the router via the browser that communicates wireless configuration data without a USB flash drive. The browser will attempt to download the WCN ActiveX Control, if it is not already available on your PC. For this action to succeed, you must already have a WAN connection, and the browser's internet security setting must be Medium or lower (select Tools &rarr; Internet Options &rarr; Security &rarr; Custom Level &rarr; Medium). 
help213,The WCN ActiveX Control provides the WCN link between your PC and the router via the browser that communicates wireless configuration data without a USB flash drive. The browser will attempt to download the WCN ActiveX Control, if it is not already available on your PC. For this action to succeed, you must already have a WAN connection, and the browser's internet security setting must be Medium or lower (select Tools &rarr; Internet Options &rarr; Security &rarr; Custom Level &rarr; Medium). 
#From:tps.dsr,Disable Soft Reset 
tps.dsr,소프트 리셋을 비활성화하십시오. 
#From:YM24,Are you sure you want to enable/disable 
YM24,활성화 또는 비활성화 하시겠습니까? 
#From:.aa.other.machines,Other Machines 
.aa.other.machines,다른 장비
#From:WIFISC_AP_PEER_CFG_ERR,Peer configuration error %u 
WIFISC_AP_PEER_CFG_ERR,피어(peer) 구성 에러 %u 
#From:MISC,Miscellaneous 
MISC,기타
#From:help450,Broadcast 
help450,Broadcast 
#From:help875,This restarts the router. Useful for restarting when you are not near the device. 
help875,This restarts the router. Useful for restarting when you are not near the device. 
#From:aa.alert.10,Please enter one machine. 
aa.alert.10,장비를 입력하십시오. 
#From:LW43,If your wireless network is already set up with Wi-Fi Protected Setup, manual confguration of the wireless network will destroy the existing wireless network. 
LW43,무선 네트워크에 이미 Wi-Fi Protected 설정이 구성되어 있으면, 무선 네트워크의 수동 설정으로 현재 설정되어 있는 무선 네트워크가 없어집니다.
#From:awsf.p,Website Filter Parameters 
awsf.p,웹사이트 필터 변수
#From:wwl.s4.intro.z2,- Exactly 5 or 13 characters 
wwl.s4.intro.z2,5자 또는 13자의 상용문자
#From:help99.s,This section is where you define QoS Engine Rules. 
help99.s,This section is where you define QoS Engine Rules. 
#From:tf.msg.Upping,Note: Now uploading. The upload may take up to 1 minute. 
tf.msg.Upping,주의 : 현재 업로드중입니다. 업로드하는데 1 분 정도 걸립니다. 
#From:help645,Physical layer 
help645,물리 계층
#From:YM90,Invalid Reservation MAC address 
YM90,보유 MAC 주소가 잘못되었습니다. 
#From:wwa.set.l2tp.msg,To set up this connection you will need to have a Username and Password from your Internet Service Provider. You also need L2TP IP adress. If you do not have this information, please contact your ISP. 
wwa.set.l2tp.msg,인터넷 연결을 하기 위해서는 가입하신 인터넷 서비스 제공업체(ISP)의 사용자명과 비밀번호와 L2TP IP 주소가 필요합니다. 이 정보가 없는 경우, 가입하신 ISP에서 확인하십시오. 
#From:up.tz.42,(GMT+04:00) Abu Dhabi, Muscat 
up.tz.42,(GMT+04:00) Abu Dhabi, Muscat 
#From:.error,Error 
.error,에러
#From:bws.CT.3,TKIP and AES 
bws.CT.3,TKIP and AES 
#From:aa.FPR.c4,Dest IP<br />End 
aa.FPR.c4,Dest IP<br />End
#From:help371.n,Note that, if you enter fewer characters in the WEP key than required, the remainder of the key is automatically padded with zeros. 
help371.n,Note that, if you enter fewer characters in the WEP key than required, the remainder of the key is automatically padded with zeros. 
#From:GW_DHCP_SERVER_RESERVATION_RECONFIG_WARNING,<warn>A DHCP Reservation %v has been reconfigured to %v, please check this meets your network requirements.</warn> 
GW_DHCP_SERVER_RESERVATION_RECONFIG_WARNING,<warn>A DHCP Reservation %v 이 %v 로 설정되었습니다. 구성에필요한 사항들에 맞는지 확인하시기 바랍니다. </warn>
#From:help75a,Enable or disable defined rules with the checkboxes at the left. 
help75a,Enable or disable defined rules with the checkboxes at the left. 
#From:.r.alert3,Invalid Gateway for route 
.r.alert3,게이트웨이 경로가 잘못되었습니다. 
#From:network.dhcp.ip.in.server,Invalid LAN IP Address, ip address in DHCP Server range 
network.dhcp.ip.in.server,DHCP 서버 범위에 있는 LAN IP 주소가 잘못되었습니다. 
#From:tf.msg.wired,To upgrade the firmware, your PC must have a wired connection to the router. Enter the name of the firmware upgrade file, and click on the Upload button. 
tf.msg.wired,펌웨어 업데이트를 위해서는 PC를 공유기에 반드시 유선으로 연결하십시오.찾아보기 버튼을 눌러 펌웨어 파일을 선택하신 뒤, 확인을 클릭 후 업로드 버튼을 클릭하십시오. 
#From:tsc.pingt.msg1,Enter a host name or IP address above and click 'Ping' 
tsc.pingt.msg1,호스트 명 또는 IP 주소를 입력한 다음 'Ping'을 누르십시오. 
#From:wwa.title.set.pppoe,Set Username and Password Connection (PPPoE) 
wwa.title.set.pppoe,사용자 명과 비밀번호 연결 설정(PPPoE)
#From:bwl.CWM.h2,The other options are available for special circumstances. 
bwl.CWM.h2,특별한 상황에 맞는 다른 옵션들이 있습니다. 
#From:help884,Check Online 
help884,Check Online 
#From:GW_LAN_RIP_METRIC_INVALID,RIP metric is invalid. 
GW_LAN_RIP_METRIC_INVALID,RIP 메트릭이 잘못되었습니다. 
#From:rb.Rebooting,Rebooting 
rb.Rebooting,재시작
#From:help819.6,Time Wait -- Waiting for a short time while a connection that was in FIN Wait is fully closed. 
help819.6,Time Wait -- Waiting for a short time while a connection that was in FIN Wait is fully closed. 
#From:GW_LOG_EMAIL_FAILED,Failure sending log email - try again in %d minutes 
GW_LOG_EMAIL_FAILED,로그 메일 송신 실패 - %d 분 후에 다시 시도하십시오. 
#From:tt.time.10,9 am 
tt.time.10,9 am 
#From:help199,This section shows the currently defined Schedule Rules. A Schedule Rule can be changed by clicking the Edit icon, or deleted by clicking the Delete icon. When you click the Edit icon, the item is highlighted, and the "Edit Schedule Rule" section is activated for editing. 
help199,This section shows the currently defined Schedule Rules. A Schedule Rule can be changed by clicking the Edit icon, or deleted by clicking the Delete icon. When you click the Edit icon, the item is highlighted, and the "Edit Schedule Rule" section is activated for editing. 
#From:help259,A method of connection where the ISP assigns your IP address when your router requests one from the ISP's server. Some ISP's require you to make some settings on your side before your router can connect to the Internet. 
help259,A method of connection where the ISP assigns your IP address when your router requests one from the ISP's server. Some ISP's require you to make some settings on your side before your router can connect to the Internet. 
#From:help823.17,Established or closing TCP connections. 
help823.17,Established or closing TCP connections. 
#From:YM118,WPA Group Key Update Interval should be between 30 and 65535 seconds. 
YM118,WPA 그룹 키 업데이트 주기는 30 ~ 65535 초 사이에 설정하십시오. 
#From:YM127,Invalid Gateway Address 
YM127,게이트웨이 주소가 잘못되었습니다. 
#From:aw.WDSEn,WDS Enable 
aw.WDSEn,WDS 설정
#From:af.algconfig,Application Level Gateway (ALG) Configuration 
af.algconfig,애플리케이션 계층 게이트웨어(ALG) 설정
#From:wwa.msg.pptp,PPTP client. 
wwa.msg.pptp,PPTP 클라이언트
#From:bws.2RIPA,Second RADIUS server IP Address 
bws.2RIPA,2차 RADIUS 서버 IP 주소
#From:KR32,Received Unknown Message 
KR32,알지 못하는 메시지를 수신하였습니다. 
#From:.aa.wiz.s4.title,Step 3: Select Machine 
.aa.wiz.s4.title,Step 3: 장비 선택 
#From:wwa.note.svcn,Note: You may also need to provide a Service Name. If you do not have or know this information, please contact your ISP. 
wwa.note.svcn,주의 : 서비스 명을 입력해야 할 경우도 있습니다. 이 정보를 모르시는 경우, 가입하신 ISP에서 확인하십시오. 
#From:help85,Detected xDSL or Frame Relay Network 
help85,Detected xDSL or Frame Relay Network 
#From:sa.Local,Local 
sa.Local,로컬
#From:GW_WEB_SERVER_IDLE_TIME,Idle time cannot be zero. 
GW_WEB_SERVER_IDLE_TIME,휴지 타임(Idle time)을 0 으로 설정할 수 없습니다. 
#From:help304,If you need to change the MAC address of the router's WAN-side Ethernet interface, either type in an alternate MAC address (for example, the MAC address of the router initially connected to the ISP) or copy the MAC address of a PC. To copy the MAC address of the computer that initially connected to the ISP, connect to the D-Link router using that computer and click the <span class="button_ref">Clone Your PC's MAC Address</span> button. The WAN interface will then use the MAC address of the network adapter in your computer. 
help304,If you need to change the MAC address of the router's WAN-side Ethernet interface, either type in an alternate MAC address (for example, the MAC address of the router initially connected to the ISP) or copy the MAC address of a PC. To copy the MAC address of the computer that initially connected to the ISP, connect to the D-Link router using that computer and click the <span class="button_ref">Clone Your PC's MAC Address</span> button. The WAN interface will then use the MAC address of the network adapter in your computer. 
#From:hhaf.dmz,Enable the DMZ option only as a last resort. If you are having trouble using an application from a computer behind the router, first try opening ports associated with the application in the <a href="../Advanced/Virtual_Server.shtml" onclick="return jump_if();">Virtual Server</a> or <a href="../Advanced/Gaming.shtml" onclick="return jump_if();">Port Forwarding</a> sections. 
hhaf.dmz,DMZ 옵션은 마지막 수단으로 사용하십시오. 공유기에 연결되어 있는 PC 에서 응용프로그램 사용에 문제가 있는 경우 <a href="../Advanced/Virtual_Server.shtml" onclick="return jump_if();">가상서버</a> 또는 <a href="../Advanced/Gaming.shtml" onclick="return jump_if();">포트 포워딩</a> 에서 응용프로그램과 관련된 포트를 열어 주시기 바랍니다. 
#From:GW_WAN_WAN_GATEWAY_IN_SUBNET_INVALID,WAN Gateway IP address %v must be within the WAN subnet. 
GW_WAN_WAN_GATEWAY_IN_SUBNET_INVALID,WAN 게이트웨이 IP 주소 %v는 반드시 WAN 서브넷에 있어야 합니다.  
#From:sd.BPSt,BigPond Status 
sd.BPSt,BigPond 상태
#From:at.LoIPR,Local IP Range 
at.LoIPR,로컬 IP 범위
#From:up.tz.49,(GMT+06:00) Almaty, Novosibirsk 
up.tz.49,(GMT+06:00) Almaty, Novosibirsk 
#From:YM81,Voice (VO) 
YM81,보이스 (VO)
#From:aw.AP,Aggregation Num Packets 
aw.AP,애그리게이션 Num 패킷 
#From:gw.gm.62,World of Warcraft 
gw.gm.62,World of Warcraft 
#From:BIGPOND_LOGGED_OUT,BigPond logged out 
BIGPOND_LOGGED_OUT,BigPond 로그 아웃
#From:tf.EmNew,Email Notification of Newer Firmware Version 
tf.EmNew,새로운 펌웨어 버전 이메일 알림
#From:LT290,This area of the screen reflects configuration settings from the <a href="../Basic/Wireless.shtml">Setup &rarr; Wireless Settings</a> page and the <a href="../Advanced/WISH.shtml">Advanced &rarr; WISH</a> page. The <span class="option">MAC Address</span> is the factory-assigned identifier of the wireless card. 
LT290,<a href="../Basic/Wireless.shtml">Setup &rarr; Wireless Settings</a> 페이지와 <a href="../Advanced/WISH.shtml">Advanced &rarr; WISH</a> 페이지에서 설정한 값이 여기에 반영됩니다. <span class="option">MAC Address</span> 는 무선 랜카드 제조업체가 할당한 고유 주소입니다. 
#From:GW_INET_ACCESS_INITIAL_MAC_FAIL,Internet access policy for MAC address %m cannot be set 
GW_INET_ACCESS_INITIAL_MAC_FAIL,MAC 주소 %m의 인터넷 접속 정책을 설정할 수 없습니다. 
#From:help303,MAC Address: 
help303,MAC Address: 
#From:YM162,The priority given to packets sent wirelessly over this conversation by the WISH logic. The priorities are: 
YM162,패킷에 설정한 우선순위는 WISH 로직에 의해 패킷을 전송합니다. 우선 순위는 다음과 같습니다 : 
#From:wwa.selectisp.not,Not Listed or Don't Know 
wwa.selectisp.not,리스트에 없거나 알 수 없습니다. 
#From:GW_XML_CONFIG_SET_PARSE_MIME,Configuration file parse error (MIME) 
GW_XML_CONFIG_SET_PARSE_MIME,설정 파일 검색 에러 (MIME)
#From:help94,The rule applies to a flow of messages whose LAN-side port number is within the range set here. 
help94,The rule applies to a flow of messages whose LAN-side port number is within the range set here. 
#From:gw.gm.70,Xbox Live 
gw.gm.70,Xbox Live 
#From:IPNAT_ICMP_UNABLE_TO_HANDLE_HEADER,Dropped ICMP packet from %v to %v as unable handle packet header 
IPNAT_ICMP_UNABLE_TO_HANDLE_HEADER,패킷 헤더를 처리할 수 없어 %v 에서 %v 로의 ICMP 패킷이 폐기되었습니다. 
#From:GW_NAT_UDP_PORT,UDP Port 
GW_NAT_UDP_PORT,UDP 포트
#From:.FTP,FTP 
.FTP,FTP 
#From:.neft,NAT Endpoint Filtering 
.neft,NAT 엔드포인트 필터링
#From:help463,When do two devices on the same Ethernet network try and transmit data at the exact same time. 
help463,When do two devices on the same Ethernet network try and transmit data at the exact same time. 
#From:ta.A12n,Administration 
ta.A12n,관리
#From:gw.gm.83,D-Link DVC-1000 
gw.gm.83,D-Link DVC-1000 
#From:YM9,Succeeded 
YM9,성공하였습니다. 
#From:GW_BIGPOND_LOGOUT,BigPond logged out 
GW_BIGPOND_LOGOUT,BigPond 로그 아웃
#From:help46,An application rule is used to open single or multiple ports on your router when the router senses data sent to the Internet on a "trigger" port or port range. An application rule applies to all computers on your internal network. 
help46,An application rule is used to open single or multiple ports on your router when the router senses data sent to the Internet on a "trigger" port or port range. An application rule applies to all computers on your internal network. 
#From:hhsl.intro,Check the log frequently to detect unauthorized network usage. 
hhsl.intro,자주 로그를 확인하여 허가 받지 않은 사용자가 네트워크를 사용하는지 확인하십시오. 
#From:sa.intro,This page displays the full details of active internet sessions to your router. 
sa.intro,공유기의 액티브 인터넷 세션의 상세사항을 확인할 수 있습니다. 
#From:help770,Tools Help 
help770,Tools Help 
#From:wwa.msg.set.pptp,To set up this connection you will need to have a Username and Password from your Internet Service Provider. You also need PPTP IP adress. If you do not have this information, please contact your ISP. 
wwa.msg.set.pptp,인터넷에 연결하기 위해 가입하신 인터넷 서비스 공급업체(ISP)의 사용자명과 비밀번호와 PPTP 주소가 필요합니다. 이 정보가 없는 경우, ISP에서 확인하십시오.
#From:GW_FW_NOTIFY_FAILED_DNS,Unable to find DNS record for firmware upgrade server %s 
GW_FW_NOTIFY_FAILED_DNS,펌웨어 업그레이드 서버의 %s DNS 레코드를 찾을 수 없습니다. 
#From:GW_WAN_MTU_INVALID,The MTU size is invalid (the permitted range is %u to %u) 
GW_WAN_MTU_INVALID,MTU 크기가 잘못되었습니다.(허용되는 범위는 %u ~ %u 입니다.)
#From:LW63,There are several ways to add a wireless device to your network. Access to the wireless network is controlled by a Registrar A registrar only allows devices onto the wireless network if you have entered the PIN, or pressed a special Wi-Fi Protected Setup button on the device. The router acts as a registrar for the network, although other devices may act as a registrar as well. 
LW63,네트워크에 무선 장비를 추가하는 방법에는 여러 가지가 있습니다. 무선 네트워크로의 접속은 Registrar에 의해 제어 됩니다. Registrar는 PIN을 입력한 경우나 또는 Wi-Fi Protected 설정을 한 경우에만 무선 네트워크에 장비를 허용합니다. 공유기가 registrar로 동작하고, 다른 장비들 역시 registrar 로 동작할 수 있습니다.
#From:gw.gm.40,Rainbow Six: Raven Shield 
gw.gm.40,Rainbow Six: Raven Shield 
#From:WIFISC_IR_REGISTRATION_SUCCESS,Successfully added station %s (%m) 
WIFISC_IR_REGISTRATION_SUCCESS,장치 %s (%m) 가 성공적으로 추가 되었습니다. 
#From:help105,The IP address of packets that will take this route. 
help105,The IP address of packets that will take this route. 
#From:GW_DHCPSERVER_RELEASED,The DHCP server address %v was released by the network device - the network device no longer wants to use it. 
GW_DHCPSERVER_RELEASED,네트워크 장비에서 DHCP 서버 주소 %v 가 갱신되었습니다. - 네트워크 장비에서 더 이상 해당 IP 주소를 사용할 필요가 없습니다. 
#From:help407,Address Resolution Protocol 
help407,Address Resolution Protocol
#From:bln.IGMP.title.h,The router uses the IGMP protocol to support efficient multicasting -- transmission of identical content, such as multimedia, from a source to a number of recipients. 
bln.IGMP.title.h,IGMP 프로토콜을 사용하여 효과적인 멀티캐스팅(멀티미디어와 같이 동일한 콘텐츠를 여러 수신 장비들에 전송)을 지원합니다.
#From:hhaw.11d,Use <strong>802.11d</strong> only for countries where it is required. 
hhaw.11d,국가별 요구에 맞추어 <strong>802.11d</strong> 단독 모드를 사용하십시오. 
#From:up.jt.2,If not, press Cancel and then click Save Settings. 
up.jt.2,취소를 누르고 난 후 설정을 저장하십시오. 
#From:GW_INET_ACCESS_POLICY_START_MAC,Policy %s started; Internet access for MAC address %s changed to: %s 
GW_INET_ACCESS_POLICY_START_MAC,정책 %s 을 시작합니다; MAC 주소 %s 의 인터넷 접속이 %s 로 변경되었습니다. 
#From:help453,A program that allows you to access resources on the web and provides them to you graphically 
help453,A program that allows you to access resources on the web and provides them to you graphically 
#From:LW32,Launch Printer Setup Wizard 
LW32,프린터 설정 마법사를 시작합니다. 
#From:wwa.msg.pppoe,Choose this option if your Internet connection requires a username and password to get online. Most DSL modems use this type of connection. 
wwa.msg.pppoe,인터넷에 연결하기 위해서는 사용자명과 비밀번호가 필요합니다. 대부분의 DSL 모뎀이 이 유형을 사용합니다.  
#From:help323,Suppose you configure the DHCP Server to manage addresses From 192.168.0.100 To 192.168.0.199. This means that 192.168.0.3 to 192.168.0.99 and 192.168.0.200 to 192.168.0.254 are NOT managed by the DHCP Server. Computers or devices that use addresses from these ranges are to be manually configured. Suppose you have a web server computer that has a manually configured address of 192.168.0.100. Because this falls within the "managed range" be sure to create a reservation for this address and match it to the relevant computer (see <a href="#Static_DHCP">Static DHCP Client</a> below). 
help323,Suppose you configure the DHCP Server to manage addresses From 192.168.0.100 To 192.168.0.199. This means that 192.168.0.3 to 192.168.0.99 and 192.168.0.200 to 192.168.0.254 are NOT managed by the DHCP Server. Computers or devices that use addresses from these ranges are to be manually configured. Suppose you have a web server computer that has a manually configured address of 192.168.0.100. Because this falls within the "managed range" be sure to create a reservation for this address and match it to the relevant computer (see <a href="#Static_DHCP">Static DHCP Client</a> below). 
#From:WIFISC_AP_SET_APSETTINGS_FAIL,SetAPSettings by (%s) failed, reason (%s), err_code (%u) 
WIFISC_AP_SET_APSETTINGS_FAIL,SetAPSettings by (%s) failed, reason (%s), err_code (%u) 
#From:up.rb.2,Rebooting will disconnect any active internet sessions. 
up.rb.2,다시 시작하면 연결되어 있는 모든 인터넷 세션이 끊어집니다. 
#From:ta.intro1,The 'admin' and 'user' accounts can access the management interface. The admin has read/write access and can change passwords, while the user has read-only access. 
ta.intro1,'관리자' 과 '사용자' 계정으로 관리 인터페이스에 접속할 수 있습니다. '관리자' 은 읽기/쓰기 권한이 있으며 비밀번호를 변경할 수 있습니다. '사용자' 는 읽기 권한만 있습니다.

#From:help561,IGMP 
help561,IGMP 
#From:KR8,Invalid IP address for route 
KR8,루트 IP 주소가 잘못되었습니다. 
#From:help442,Bit/sec 
help442,Bit/sec 
#From:tt.week.3,3rd 
tt.week.3,3rd 
#From:hhav.r_name,The name field allows you to specify a name for identification of this route, e.g. 'Network 2' 
hhav.r_name,이름 항목에서 경로 확인을 할 수 있습니다.(예: Network2) 
#From:help23,Select a schedule for when the service will be enabled. If you do not see the schedule you need in the list of schedules, go to the <a href="../Tools/Schedules.shtml"> Tools &rarr; Schedules</a> screen and create a new schedule. 
help23,Select a schedule for when the service will be enabled. If you do not see the schedule you need in the list of schedules, go to the <a href="../Tools/Schedules.shtml"> 도구 &rarr; 스케줄</a> screen and create a new schedule. 
#From:.dhcpsrv,DHCP Server 
.dhcpsrv,DHCP 서버
#From:help762,A generic term for the family of digital subscriber line (DSL) technologies, such as ADSL, HDSL, RADSL, and SDSL. 
help762,A generic term for the family of digital subscriber line (DSL) technologies, such as ADSL, HDSL, RADSL, and SDSL. 
#From:.enabled,Enabled 
.enabled,설정
#From:bd.NETBIOS_REG_TYPE_H,Hybrid (Point-to-Point then Broadcast) 
bd.NETBIOS_REG_TYPE_H,Hybrid (Point-to-Point then Broadcast) 
#From:KR55,While not a perfect mapping, the following loose correspondences between the "cone" classification and the "endpoint filtering" modes can be drawn: if this router is configured for endpoint independent filtering, it implements full cone behavior; address restricted filtering implements restricted cone behavior; and port and address restricted filtering implements port restricted cone behavior. 
KR55,완전하게 맞는 매핑이 없는 경우, 아래의 "cone" 분류와 "endpoint filtering" 해당하는 모드를 사용하십시오.    공유기에 엔드포인트 개별 필터링이 설정되면, full cone으로 동작합니다. 주소 제한 필터링(restricted filtering)은 restricted cone을 구현합니다. 포트 및 주소 restricted 필터링은 port restricted cone으로 동작합니다.
#From:GW_INET_ACCESS_RESTRICTED,One or more Internet access policies are in effect. Internet access will be restricted according to these policies 
GW_INET_ACCESS_RESTRICTED,한 개 이상의 인터넷 정책이 효력이 있습니다.  이런 정책에 따라 인터넷 접속이 제한 됩니다. 
#From:gw.gm.69,WON Servers 
gw.gm.69,WON 서버
#From:aa.ACR.c5,Filtering 
aa.ACR.c5,필터링
#From:help331,This option lets you reserve IP addresses, and assign the same IP address to the network device with the specified MAC address any time it requests an IP address. This is almost the same as when a device has a static IP address except that the device must still request an IP address from the D-Link router. The D-Link router will provide the device the same IP address every time. DHCP Reservations are helpful for server computers on the local network that are hosting applications such as Web and FTP. Servers on your network should either use a static IP address or use this option. 
help331,This option lets you reserve IP addresses, and assign the same IP address to the network device with the specified MAC address any time it requests an IP address. This is almost the same as when a device has a static IP address except that the device must still request an IP address from the D-Link router. The D-Link router will provide the device the same IP address every time. DHCP Reservations are helpful for server computers on the local network that are hosting applications such as Web and FTP. Servers on your network should either use a static IP address or use this option. 
#From:bwz.note.WlsWz,Some changes made using this Setup Wizard may require you to change some settings on your wireless client adapters so they can still connect to the D-Link Router. 
bwz.note.WlsWz,설정 마법사로 설정을 수정하시는 경우 공유기와의 연결을 유지하기 위해 무선 랜카드의 설정을 일부 변경해야 할 수도 있습니다. 
#From:GW_WAN_PPPOE_LAN_SUBNET_CONFLICT_INVALID,PPPoE IP address %v conflicts with LAN subnet 
GW_WAN_PPPOE_LAN_SUBNET_CONFLICT_INVALID,PPPoE IP 주소 %v 와 LAN 서브넷이 충돌됩니다. 
#From:GW_XML_CONFIG_SET_SUCCESS,Successfully imported configuration file 
GW_XML_CONFIG_SET_SUCCESS,설정 파일 불러오기에 성공하였습니다. 
#From:help345,You can assign a name for each computer that is given a reserved IP address. This may help you keep track of which computers are assigned this way. 
help345,You can assign a name for each computer that is given a reserved IP address. This may help you keep track of which computers are assigned this way. 
#From:hhav.name,Check the <strong>Application Name</strong> drop down menu for a list of predefined server types. If you select one of the predefined server types, click the arrow button next to the drop down menu to fill out the corresponding field. 
hhav.name,이미 지정된 서버 유형 리스트는 <strong>응용프로그램 이름</strong>  드랍다운 메뉴에서 확인하십시오. 미리 지정된 서버 유형을 선택하면, 해당하는 항목을 채울 때까지 드랍다운 메뉴 옆에 있는 화살표 버튼을 누르십시오.
#From:av.PriP,Private Port 
av.PriP,사설 포트
#From:tsc.pingt.msg103,% loss 
tsc.pingt.msg103,% 손실
#From:help553,Hypertext Transfer Protocol is used to transfer files from HTTP servers (web servers) to HTTP clients (web browsers) 
help553,Hypertext Transfer Protocol is used to transfer files from HTTP servers (web servers) to HTTP clients (web browsers) 
#From:help.upnp.2,If you need to use the UPnP functionality, you can enable it here. 
help.upnp.2,If you need to use the UPnP functionality, you can enable it here. 
#From:WAN_MODE_INCORRECT,Incorrect WAN connectivity mode 
WAN_MODE_INCORRECT,WAN 연결 모드가 정확하지 않습니다. 
#From:YM60,Local end port should be between 0 and 65535 inclusive. 
YM60,로컬 마지막 포트 넘버는 0 ~ 65535(포함) 입니다. 
#From:help590,Kbps 
help590,Kbps 
#From:wwl.alert.pv5.2_5,WEP password must be exactly 5 alphanumeric characters. 
wwl.alert.pv5.2_5,WEP 비밀번호는 5자리 문자/숫자로 입력해 주십시오. 
#From:help608,Megabits per second 
help608,Megabits per second
#From:.aa.wiz.s5.title,Step 4: Select Filtering Method 
.aa.wiz.s5.title,Step 4: 필터링 방법 선택
#From:KR22.ww,Invalid PIN number. 
KR22.ww,PIN 번호가 잘못되었습니다. 
#From:.aa.wiz.s7.help,Specify rules to prohibit access to specific IP addresses and ports. 
.aa.wiz.s7.help,특정 IP 주소와 포트로의 접속을 제한하기 위한 규칙을 정의하십시오. 
#From:IPL2TP_SEQUENCING_DEACTIVATED,L2TP session server stopped sending sequencing numbers for local session 0x%04X 
IPL2TP_SEQUENCING_DEACTIVATED,L2TP 세션 서버가 로컬 세션 0x%04X 의 연속 번호 송신을 중단되었습니다. 
#From:KR100,Save Settings Failed 
KR100,설정 저장에 실패하였습니다. 
#From:tps.apc,Advanced Printer Configuration 
tps.apc,고급 프린터 설정 
#From:up.tz.09,(GMT-06:00) Mexico City 
up.tz.09,(GMT-06:00) Mexico City 
#From:tt.Jul,Jul 
tt.Jul,Jul 
#From:bws.WKL.0,64 bit (10 hex digits) 
bws.WKL.0,64 bit (10 hex digits) 
#From:GW_WAN_INTERFACE_DOWN,WAN interface is down 
GW_WAN_INTERFACE_DOWN,WAN 인터페이스가 다운되었습니다. 
#From:WCN_LOG_RESTORE,Restore wireless settings 
WCN_LOG_RESTORE,무선 설정 복구 
#From:bws.msg.WPA,Use <strong>WPA or WPA2</strong> mode to achieve a balance of strong security and best compatibility. This mode uses WPA for legacy clients while maintaining higher security with stations that are WPA2 capable. Also the strongest cipher that the client supports will be used. For best security, use <strong>WPA2 Only</strong> mode. This mode uses AES(CCMP) cipher and legacy stations are not allowed access with WPA security. For maximum compatibility, use <strong>WPA Only</strong>. This mode uses TKIP cipher. Some gaming and legacy devices work only in this mode. 
bws.msg.WPA,<strong>WPA 또는 WPA2</strong> 모드를 사용하시면 강력한 보안과 최적의 호환성을 이룰 수 있습니다. 이 모드에서 오래된 무선 클라이언트에서 사용하는 WPA를 사용하는 반면, WPA2을 인식할 수 있는 클라이언트에는 좀 더 높은 보안을 유지하는 WPA2를 사용합니다. 클라이언트가 지원하는 가장 강력한 암호화 방법이 사용됩니다. 최고의 보안을 위해, <strong>WPA2 Only</strong> 모드를 사용하십시오. 이 모드는 AES(CCMP) 암호화를 사용하는데 WPA2를 인식하지 못하는 무선 클라이언트에게는 허용되지 않습니다. 최대 호환성을 위해서는 <strong>WPA Only</strong> 를 사용하십시오. 이 모드는 TKIP 암호화 방법을 사용합니다. 일부 게임과 오래된 장비들은 이 모드에서만 동작합니다. 
#From:gw.gm.17,Everquest 
gw.gm.17,Everquest 
#From:help411,Advanced Encryption Standard 
help411,Advanced Encryption Standard 
#From:gw.vs.4,DNS 
gw.vs.4,DNS 
#From:GW_INET_ACCESS_INITIAL_IP,Internet access for IP address %v set to: %s 
GW_INET_ACCESS_INITIAL_IP,인터넷 접속을 위한 IP 주소 %v 가 %s 로 변경 되었습니다. 
#From:help546,Hexadecimal 
help546,Hexadecimal 
#From:.wizquit,Do you want to abandon all changes you made to this wizard? 
.wizquit,마법사에서 수정한 것을 모두 취소하시겠습니까? 
#From:YM109,Invalid L2TP IP address 
YM109,L2TP IP 주소가 잘못되었습니다. 
#From:tss.intro,The System Settings section allows you to reboot the device, or restore the router to the factory default settings. Restoring the unit to the factory default settings will erase all settings, including any rules that you have created. 
tss.intro,시스템 설정에서 장비를 다시 시작 하거나 공유기를 공장 초기화 값으로 복구할 수 있습니다. 장비를 공장 초기화 값으로 복구하면 생성하신 규칙을 포함해 모든 설정이 삭제됩니다. 
#From:WIFISC_AP_RESET_FAIL,Reset by %s failed, reason (%s), err_code (%u) 
WIFISC_AP_RESET_FAIL,Reset by %s failed, reason (%s), err_code (%u)
#From:af.EFT.0,Endpoint Independent 
af.EFT.0,Endpoint Independent
#From:help318,When you set <span class="option">Enable DHCP Server</span>, the following options are displayed. 
help318,When you set <span class="option">Enable DHCP Server</span>, the following options are displayed. 
#From:tsl.intro,The SysLog options allow you to send log information to a SysLog Server. 
tsl.intro,시스템 로그 옵션에서 시스템 로그 서버의 로그 정보를 전송할 수 있습니다. 
#From:tt.time.4,3 am 
tt.time.4,3 am 
#From:KR107,When this option is enabled, the router restricts the flow of outbound traffic so as not to exceed the WAN uplink bandwidth. 
KR107,이 옵션을 설정하면, 공유기가 WAN 업링크 대역폭을 초과하지 않도록 송신 트래픽 흐름을 제한합니다.  
#From:tt.time.21,8 pm 
tt.time.21,8 pm 
#From:aw.FT,Fragmentation Threshold 
aw.FT,프레그멘테이션 값
#From:IPL2TP_SESSION_CONNECTED,L2TP local session 0x%04X connected 
IPL2TP_SESSION_CONNECTED,L2TP 로컬 세션  0x%04X 이 연결되었습니다. 
#From:GW_WISH_RULES_HOST2_PORT,'%s': Host 2 port start, %u, must be less than host 2 port end, %u 
GW_WISH_RULES_HOST2_PORT,%s': Host 2 시작 포트, %u 는 반드시 host 2 마지막 포트, %u 보다 낮아야 합니다.
#From:.save,Save 
.save,저장
#From:help.ts.ls,Load Settings From Local Hard Drive 
help.ts.ls,로컬 하드 드라이버에서 설정 가져오기 
#From:at.NEst,Not Estimated 
at.NEst,측정 되지 않았습니다. 
#From:help888,Once you have a firmware update on your computer, use this option to browse for the file and then upload the information into the router. 
help888,Once you have a firmware update on your computer, use this option to browse for the file and then upload the information into the router. 
#From:help653,A logical channel endpoint in a network. A computer might have only one physical channel (its Ethernet channel) but can have multiple ports (logical channels) each identified by a number. 
help653,A logical channel endpoint in a network. A computer might have only one physical channel (its Ethernet channel) but can have multiple ports (logical channels) each identified by a number. 
#From:YM101,Invalid WAN gateway IP address 
YM101,WAN 게이트웨이 IP 주소가 잘못되었습니다. 
#From:KR50,Auto 
KR50,자동
#From:help481,Decibels relative to isotropic radiator 
help481,Decibels relative to isotropic radiator 
#From:KR105,Anti-Spoof checking 
KR105,Anti-Spoof 확인
#From:.firmware,Firmware 
.firmware,펌웨어
#From:gw.gm.43,Rogue Spear 
gw.gm.43,Rogue Spear 
#From:YM56,Protocol must be a number. 
YM56,프로토콜은 반드시 숫자입니다. 
#From:aa.WebSite.Domain,Website URL/Domain 
aa.WebSite.Domain,웹사이트 URL/ 도메인
#From:wps.messgae1_1,Please start WPS on the wireless device you are adding to your wireless network winth 
wps.messgae1_1,무선 네트워크에 추가하고 있는 무선 장비에서 WPS을 시작하십시오. 
#From:GW_QOS_RULES_MAX_TRANS,Max transmission rate should be between 8 kbps and 100 Mbps, inclusive. 
GW_QOS_RULES_MAX_TRANS,최대 전송률은 8 kbps ~ 100Mbps(포함) 사이입니다. 
#From:GW_QOS_RULES_PROTOCOL,'%s': Protocol, %d, needs to be between 0 and 257 
GW_QOS_RULES_PROTOCOL,%s': 프로토콜, %d 은 0 ~ 257 입니다. 
#From:IPL2TP_SHUTDOWN_STARTED,L2TP local tunnel 0x%04X RTE module is shutting down. 
IPL2TP_SHUTDOWN_STARTED,L2TP 로컬 터널 0x%04X RTE 모듈이 중단되고 있습니다. 
#From:ss.TXPD,TX Packets Dropped 
ss.TXPD,TX 패킷이 차단되었습니다. 
#From:up.tz.55,(GMT+08:00) Beijing, Chongqing, Hong Kong, Urumqi 
up.tz.55,(GMT+08:00) Beijing, Chongqing, Hong Kong, Urumqi 
#From:GW_WEB_SERVER_NO_ACCESS,You must have at least one of HTTP or HTTPS enabled. 
GW_WEB_SERVER_NO_ACCESS,HTTP 또는 HTTS 중 한 가지는 반드시 설정하셔야 합니다. 
#From:wwa.intro.online2,Click Next if you still want to secure the router with a password and set the time zone. 
wwa.intro.online2,공유기 보안을 위해 비밀번호와 시간 대 설정을 위해 다음 버튼을 누르십시오. 
#From:help50,Select the outbound protocol used by your application (for example <code>Both</code>). 
help50,Select the outbound protocol used by your application (for example <code>Both</code>). 
#From:help70,Enter the UDP ports to open (for example <code>6159-6180, 99</code>). 
help70,Enter the UDP ports to open (for example <code>6159-6180, 99</code>). 
#From:bd.title.SDC,DHCP Reservation 
bd.title.SDC,DHCP 보유(Reservation)
#From:wwl.enc,Encryption 
wwl.enc,암호화
#From:KR87,Configure the IP address of the backup WINS server, if any. 
KR87,2차 WINS 서버가 있는 경우 그  IP 주소를 설정하십시오. 
#From:up.tz.60,(GMT+09:00) Osaka, Sapporo, Tokyo 
up.tz.60,(GMT+09:00) Osaka, Sapporo, Tokyo 
#From:gw.gm.54,Ultima 
gw.gm.54,Ultima 
#From:GW_ADMIN_LOGOUT,Administrator logout 
GW_ADMIN_LOGOUT,관리자 로그 아웃
#From:bws.ORAD,Optional backup RADIUS server 
bws.ORAD,2차 RADIUS 서버는 옵션입니다. 
#From:gw.gm.44,Serious Sam II 
gw.gm.44,Serious Sam II 
#From:GW_WISH_RULES_DUPLICATED,'%s' is duplicate of '%s' 
GW_WISH_RULES_DUPLICATED,%s' 와 '%s' 은 중복입니다. 
#From:bwn.RPing,Enable WAN Ping Respond 
bwn.RPing,WAN Ping 응답 설정 
#From:igmp.e.h,This option must be enabled if any applications on the LAN participate in a multicast group. If you have a multimedia LAN application that is not receiving content as expected, try enabling this option. 
igmp.e.h,LAN 상의 멀티캐스트 그룹에 속하는 응용프로그램이 있으면 이 옵션을 설정하십시오. 예상 대로 컨텐트를 수신하지 못하는 멀티미디어 LAN 응용프로그램이 있는 경우, 이 옵션을 다시 설정하십시오. 
#From:.bln.title.IGMPMemberships.h,If IGMP is enabled, this area of the screen shows all multicast groups of which any LAN devices are members. 
.bln.title.IGMPMemberships.h,IGMP를 설정하면, 여기에서 멀티캐스트 그룹에 속하는 모든 멤버를 확인할 수 있습니다. 
#From:help529,Full-duplex 
help529,Full-duplex 
#From:help425,Attenuation 
help425,Attenuation 
#From:help400,ACL. This is a database of network devices that are allowed to access resources on the network. 
help400,ACL. This is a database of network devices that are allowed to access resources on the network. 
#From:help806,The number of packets sent from the router. 
help806,The number of packets sent from the router. 
#From:YM16,Destination IP Start address should not be in LAN subnet 
YM16,목적지 시작 IP 주소는 LAN 서브넷에 있어서는 안됩니다. 
#From:help49,Enter the outgoing port range used by your application (for example <code>6500-6700</code>). 
help49,Enter the outgoing port range used by your application (for example <code>6500-6700</code>). 
#From:help367,Example: 
help367,Example: 
#From:help509,Dynamic IP address 
help509,Dynamic IP address 
#From:GW_SCHEDULES_NAME_CONFLICT_INVALID,Name '%s' is already used 
GW_SCHEDULES_NAME_CONFLICT_INVALID,%s' 이미 사용중입니다. 
#From:wepkey4,WEP Key 4 
wepkey4,WEP Key 4 
#From:gw.gm.28,Links 
gw.gm.28,Links 
#From:GW_WEB_SERVER_SAME_PORT_WAN,HTTP and HTTPS cannot occupy the same WAN port. 
GW_WEB_SERVER_SAME_PORT_WAN,HTTP와 HTTPS는 같은 WAN 포트를 사용할 수 없습니다. 
#From:help337,Windows Me 
help337,Windows Me 
#From:ta.AdmSt,Administrator Settings 
ta.AdmSt,관리자 설정
#From:up.tz.08,(GMT-06:00) Central Time (US/Canada) 
up.tz.08,(GMT-06:00) Central Time (US/Canada) 
#From:.syslog,SysLog 
.syslog,시스템 로그
#From:help394,If this is selected, the user must connect from the same computer whenever logging into the wireless network. 
help394,If this is selected, the user must connect from the same computer whenever logging into the wireless network. 
#From:.aa.wiz.s7.title,Step 5: Port Filter 
.aa.wiz.s7.title,Step 5: 포트 필터
#From:YM65,invalid source ending IP Address. 
YM65,소스의 마지막 IP 주소가 잘못되었습니다. 
#From:bln.title,Network Settings 
bln.title,네트워크 설정
#From:WIFISC_AP_PROXY_PROCESS_FAIL,STA with MAC (%m) failed to register in, reason (%s), err_code (%u) 
WIFISC_AP_PROXY_PROCESS_FAIL,MAC 주소가 (%m) 인 단말장치의 등록에 실패하였습니다. 원인 (%s), err_code (%u)
#From:tt.intro.Time,The Time Configuration option allows you to configure, update, and maintain the correct time on the internal system clock. From this section you can set the time zone that you are in and set the NTP (Network Time Protocol) Server. Daylight Saving can also be configured to automatically adjust the time when needed. 
tt.intro.Time,시간 설정 옵션으로 내부 시스템 시간을 정확하게 설정, 업데이트, 관리할 수 있습니다. 여기에서 현재 계신 곳의 시간 대역과  NTP(Network Time Protocol) 서버를 설정할 수 있습니다. 필요한 경우, 일광 절약 시간도 설정하여 자동으로 조정할 수 있습니다.
#From:GW_DYNDNS_SERROR,Error updating dynamic DNS entry: %s. Will retry later 
GW_DYNDNS_SERROR,DDNS 엔트리 업데이트 에러: %s 다시 시도해 주십시오. 
#From:.DHCP,DHCP 
.DHCP,DHCP 
#From:.more,More 
.more,More 
#From:ZM12,Send/Receive login 
ZM12,송신/수신 로긴
#From:wwl.s3.note.2,Note: All D-Link wireless adapters currently support WPA. 
wwl.s3.note.2,주의: 모든 D-Link 무선 랜카드들은 현재 WPA를 지원합니다. 
#From:.aa.bsecure.banner_ad,Banner Ad 
.aa.bsecure.banner_ad,Banner Ad 
#From:help709,TCP Raw 
help709,TCP Raw 
#From:help262,Enable BigPond: 
help262,Enable BigPond: 
#From:sps.port,Port 
sps.port,포트
#From:LY23,Wireless Status 
LY23,무선 상태
#From:help88b,For most applications, automatic classification will be adequate, and specific QoS Engine Rules will not be required. 
help88b,For most applications, automatic classification will be adequate, and specific QoS Engine Rules will not be required. 
#From:help164.2,Whether SPI is enabled or not, the router always tracks TCP connection states and ensures that each TCP packet's flags are valid for the current state. 
help164.2,Whether SPI is enabled or not, the router always tracks TCP connection states and ensures that each TCP packet's flags are valid for the current state. 
#From:bwl.NSS.h1,Selecting more than one spatial stream can increase throughput, but can in some cases decrease signal quality. 
bwl.NSS.h1,한 개 이상의 연속 스트림 선택으로 실제 처리량(throughput) 을 향상 시킬 수 있습니다. 그러나 어떤 경우는 신호 질을 감소시킬 수도 있습니다. 
#From:help881,Wait for the router to reboot. This can take another minute or more. 
help881,Wait for the router to reboot. This can take another minute or more. 
#From:haf.intro.2,See also <a href="../Advanced/Virtual_Server.shtml"> Advanced &rarr; Virtual&nbsp;Server</a>, <a href="../Advanced/Gaming.shtml">Advanced &rarr; Port&nbsp;Forwarding</a>, <a href="../Advanced/Special_Applications.shtml"> Advanced &rarr; Application&nbsp;Rules</a>, and <a href="../Advanced/Network.shtml">Advanced &rarr; Network (UPnP)</a> for related options. 
haf.intro.2,<a href="../Advanced/Virtual_Server.shtml"> Advanced &rarr; Virtual&rarr;Server</a>, <a href="../Advanced/Gaming.shtml">Advanced &rarr; Port&rarr;Forwarding</a>, <a href="../Advanced/Special_Applications.shtml"> Advanced  ApplicationRules</a>, <a href="../Advanced/Network.shtml">Advanced  Network (UPnP)</a> 에서 관련 옵션을 확인하십시오. 
#From:help203,Note: Do not connect more than one USB flash drive to the router, not even with a USB hub. 
help203,Note: Do not connect more than one USB flash drive to the router, not even with a USB hub. 
#From:GW_INET_ACL_NO_MACHINE_IN_LAN_SUBNET_INVALID,There is no machine defined in policy %s. 
GW_INET_ACL_NO_MACHINE_IN_LAN_SUBNET_INVALID,정책 %s 에서 지정한 장치가 없습니다. 
#From:LW39c,Before launching these wizards, please make sure you have followed all steps outlined in the Quick Installation Guide included in the package. 
LW39c,각 마법사를 시작하기 전에,  제품 박스에 들어 있는 간단 설치 매뉴얼(QIG) 에서 강조한 단계를 모두 따라해 주시기 바랍니다. 
#From:WIFISC_AP_SET_SELECTED_REGISTRAR_COMPLETE,Set Selected Registrar complete 
WIFISC_AP_SET_SELECTED_REGISTRAR_COMPLETE,선택한 Registrar 설정이 완료되었습니다. 
#From:.destip,Destination IP 
.destip,목적지 IP
#From:help840,The Time Configuration option allows you to configure, update, and maintain the correct time on the router's internal system clock. From this section you can set the time zone that you are in and set the Time Server. Daylight saving can also be configured to automatically adjust the time when needed. 
help840,The Time Configuration option allows you to configure, update, and maintain the correct time on the router's internal system clock. From this section you can set the time zone that you are in and set the Time Server. Daylight saving can also be configured to automatically adjust the time when needed. 
#From:GW_DHCP_CLIENT_CLIENT_NAME_INVALID,Invalid DHCP Client name 
GW_DHCP_CLIENT_CLIENT_NAME_INVALID,DHCP 클라이언트 이름이 잘못되었습니다. 
#From:help802,If you provided email information with the <a href="../Tools/EMail.shtml">Tools &rarr; Email</a> screen, clicking the <span class="button_ref">Email Now</span> button sends the router log to the configured email address. 
help802,If you provided email information with the <a href="../Tools/EMail.shtml">Tools &rarr; Email</a> screen, clicking the <span class="button_ref">Email Now</span> button sends the router log to the configured email address. 
#From:tt.dsdates,Daylight Saving Dates 
tt.dsdates,일광 시간 절약 날짜 
#From:wwa.l2tp.svra,L2TP Server IP Address (may be same as gateway) 
wwa.l2tp.svra,L2TP 서버 IP 주소 (게이트웨이와 같은 주소)
#From:help34b,Note that L2TP VPN connections typically use IPSec to secure the connection. To achieve multiple VPN pass-through in this case, the IPSec ALG must be enabled. 
help34b,Note that L2TP VPN connections typically use IPSec to secure the connection. To achieve multiple VPN pass-through in this case, the IPSec ALG must be enabled. 
#From:YM166,Failed to retrieve active session list. Retrying 
YM166,액티브 세션 리스트 검색에 실패하였습니다. 다시 시도. 
#From:tt.time.11,10 am 
tt.time.11,10 am 
#From:te.EnEmN,Enable Email Notification 
te.EnEmN,이메일 알림 기능
#From:help786,The actual transmission rate of the client in megabits per second. 
help786,The actual transmission rate of the client in megabits per second. 
#From:bwn.UN,Username 
bwn.UN,사용자명
#From:WIFISC_AP_REBOOT_FAIL,Reboot by %s fail, reason (%s), err_code (%u) 
WIFISC_AP_REBOOT_FAIL,%s 실패로 재시작 되었습니다. 원인 (%s), err_code (%u)
#From:help91,The priority of the message flow is entered here -- 1 receives the highest priority (most urgent) and 255 receives the lowest priority (least urgent). 
help91,The priority of the message flow is entered here -- 1 receives the highest priority (most urgent) and 255 receives the lowest priority (least urgent). 
#From:aa.alert.8,This Policy Name is already used. 
aa.alert.8,정책 명이 이미 사용중입니다. 
#From:help720,Universal Plug and Play 
help720,Universal Plug and Play 
#From:wprn.tt5,Click <em>Refresh</em> to try again. 
wprn.tt5,<em>Refresh</em> 눌러 다시 시도하십시오. 
#From:LW39,The following Web-based wizards are designed to assist you in your wireless network setup and wireless device connection. 
LW39,다음의 웹기반 마법사는 무선 네트워크 설정과 무선 장비 연결을 도와줍니다. 
#From:YM174,Password and Verify Password do not match. Please reconfirm user password. 
YM174,비밀번호와 비밀번호 확인이 맞지 않습니다. 사용자 비밀번호을 다시 확인하여 주십시오. 
#From:YM13,A Port Filter rule name cannot be blank. 
YM13,포트 필터 규칙이 공백일 수 없습니다. 
#From:ta.ERM,Enable Remote Management 
ta.ERM,원격 관리 설정 
#From:IPPPPLCP_SET_REMOTE_AUTH,LCP sets remote auth: %04x 
IPPPPLCP_SET_REMOTE_AUTH,LCP가 원격 인증을 설정합니다 : %04x
#From:help728,Universal Serial Bus 
help728,Universal Serial Bus 
#From:IPL2TP_FATAL_TIMEOUT,L2TP local tunnel 0x%04X RTE module fatal timeout - remote server is not responding. 
IPL2TP_FATAL_TIMEOUT,L2TP 로컬 터널 0x%04X RTE 모듈 시간 만료 - 원격지 서버가 응답하지 않습니다. 
#From:hhaf.ngss,<strong>Non-UDP/TCP/ICMP LAN Sessions</strong> is normally enabled. It facilitates single VPN connections to a remote host. 
hhaf.ngss,<strong>Non-UDP/TCP/ICMP LAN Sessions</strong> 이 정상적으로 설정되었습니다. 이 설정으로 원격지 단말 장치에 단일 VPN 연결을 할 수 있습니다. 
#From:bln.title.NetSt,Network Settings 
bln.title.NetSt,네트워크 설정
#From:YM172,Your web browser is too old to use this web site. Please upgrade your browser. 
YM172,이 사이트에 접속하기에는 웹브라우저 버전이 너무 낮습니다. 웹브라우저를 업그레이드 하십시오. 
#From:av.traftype,Traffic Type 
av.traftype,트래픽 종류
#From:YM31,Invalid TPC Max Gain 
YM31,TPC 최대 이득(gain)이 잘못되었습니다. 
#From:help467,Information that has been translated into binary so that it can be processed or moved to another device 
help467,Information that has been translated into binary so that it can be processed or moved to another device 
#From:bwn.Mode.PPTP,PPTP (Username / Password) 
bwn.Mode.PPTP,PPTP (사용자명/비밀번호 )
#From:help140,This section shows the currently defined access control policies. A policy can be changed by clicking the Edit icon, or deleted by clicking the Delete icon. When you click the Edit icon, the Policy Wizard starts and guides you through the process of changing a policy. You can enable or disable specific policies in the list by clicking the "Enable" checkbox. 
help140,This section shows the currently defined access control policies. A policy can be changed by clicking the Edit icon, or deleted by clicking the Delete icon. When you click the Edit icon, the Policy Wizard starts and guides you through the process of changing a policy. You can enable or disable specific policies in the list by clicking the "Enable" checkbox. 
#From:hhsd.intro,All of your WAN and LAN connection details are displayed here. 
hhsd.intro,모든 WAN과 LAN  연결 상세 정보를 여기에서 확인할 수 있습니다.  
#From:wprn.rppd,A Required Printing Protocol Is Disabled 
wprn.rppd,필수 프린팅 프로토콜이 비활성화되었습니다. 
#From:help63,Suppose you are hosting an online game server that is running on a PC with a private IP Address of 192.168.0.50. This game requires that you open multiple ports (6159-6180, 99) on the router so Internet users can connect. 
help63,Suppose you are hosting an online game server that is running on a PC with a private IP Address of 192.168.0.50. This game requires that you open multiple ports (6159-6180, 99) on the router so Internet users can connect. 
#From:.aa.wiz.s6.msg,Select the Sentinel categories to filter. 
.aa.wiz.s6.msg,필터하실 Sentinel 범위를 선택하십시오. 
#From:GW_SMTP_PASSWORD_INVALID,Password is invalid 
GW_SMTP_PASSWORD_INVALID,비밀번호가 잘못되었습니다. 
#From:wps.messgae1_2,Please press down the Push Button (physical or virtual) on the wireless device you are adding to your wireless network within 
wps.messgae1_2,무선 장비상의 Push Button(physical or virtual)을 눌러 무선 네트워크에 장비를 추가하십시오. 
#From:ap.intro.sv,The new settings have been applied. 
ap.intro.sv,새로운 설정이 적용되었습니다. 
#From:.L2TPsubnet,L2TP Subnet Mask 
.L2TPsubnet,L2TP 서브넷 마스크
#From:GW_LOG_EMAIL_BEFORE_REBOOT,Sending log email before reboot 
GW_LOG_EMAIL_BEFORE_REBOOT,리부팅 전에 로그 이메일 전송  
#From:at.Any,Any 
at.Any,모두
#From:help288,The following options apply to all WAN modes. 
help288,The following options apply to all WAN modes. 
#From:YM85,Host 2 Port Range 
YM85,Host 2 포트 범위
#From:bws.SM.h1,Unless one of these encryption modes is selected, wireless transmissions to and from your wireless network can be easily intercepted and interpreted by unauthorized users. 
bws.SM.h1,암호화 종류중 한 가지를 선택하지 않으면, 무선 네트워크로 송/수신 트래픽이 쉽게 중간에 가로채일 수 있고, 인가 받지 못한 사용자들이 접속할 수 있습니다. 
#From:GW_SCHEDULES_NAME_INVALID,The 'Name' field can not be blank 
GW_SCHEDULES_NAME_INVALID,Name' 항목을 공백으로 두지 마십시오. 
#From:LS204,Invalid Gateway 
LS204,게이트웨이가 잘못되었습니다. 
#From:help177,In addition to the filters listed here, two predefined filters are available wherever inbound filters can be applied: 
help177,In addition to the filters listed here, two predefined filters are available wherever inbound filters can be applied: 
#From:up.tz.46,(GMT+05:00) Islamabad, Karachi, Tashkent 
up.tz.46,(GMT+05:00) Islamabad, Karachi, Tashkent 
#From:rb.wait,Please wait <span id="timeleft"></span>&nbsp;seconds. 
rb.wait,<span id="timeleft"></span>&nbsp; 초 기다려 주십시오. 
#From:help719,Communication between a single sender and receiver 
help719,Communication between a single sender and receiver 
#From:hhsl.lmail,You can also have the log mailed to you periodically. Refer to <a href="../Tools/EMail.shtml" onclick="return jump_if();">Tools &rarr; EMail</a>. 
hhsl.lmail,주기적으로 로그를 메일로 받을 수 있습니다. <a href="../Tools/EMail.shtml" onclick="return jump_if();">도구 -> 이메일 설정</a> 를 참고하십시오. 
#From:IPSTACK_REJECTED_LAND_ATTACK,Blocked packet from %v to %v (LAND Attack) 
IPSTACK_REJECTED_LAND_ATTACK,%v 에서 %v 로의 패킷이 차단되었습니다. (LAND Attack)
#From:aw.16,16 Kbytes 
aw.16,16 Kbytes 
#From:bwl.NN,Wireless Network Name 
bwl.NN,무선 네트워크 이름
#From:help594,Local Area Network 
help594,Local Area Network
#From:aw.erpe.h3,(Refer to the <a href="../Basic/Wireless.shtml"> Setup &rarr; Wireless Settings &rarr; Manual Wireless Network Setup</a> page.) 
aw.erpe.h3,( <a href="../Basic/Wireless.shtml"> Setup &rarr; Wireless Settings &rarr; Manual Wireless Network Setup</a> 페이지를 참고하십시오.)
#From:ap.intro.noreboot,Press the button below to continue configuring the router if the previous page doesn't restore in <span id="timeleft"></span>&nbsp;seconds. 
ap.intro.noreboot,<span id="timeleft"></span>초 뒤 이전 화면으로 복구되지 않을 경우, 아래 버튼을 눌러 공유기 설정을 계속하십시오. 
#From:IPL2TP_SESSION_CONNECT_FAIL,L2TP local session 0x%04X connect attempt failed 
IPL2TP_SESSION_CONNECT_FAIL,L2TP 로컬 세션 0x%04X 연결 시도가 실패하였습니다. 
#From:gw.gm.21,Final Fantasy XI (PS2) 
gw.gm.21,Final Fantasy XI (PS2) 
#From:wwl.BEST,BEST 
wwl.BEST,BEST 
#From:.support,Support 
.support,지원
#From:aa.alert.14,You cannot add new IP addresses. You can only reuse IP addresses from other policies. 
aa.alert.14,새로운 IP 주소를 추가할 수 없습니다. 다른 정책의 IP 주소를 재사용만 가능합니다. 
#From:.cablestate,Cable Status 
.cablestate,케이블 상태 
#From:help314,DHCP stands for Dynamic Host Configuration Protocol. The DHCP section is where you configure the built-in DHCP Server to assign IP addresses to the computers and other devices on your local area network (LAN). 
help314,DHCP stands for Dynamic Host Configuration Protocol. The DHCP section is where you configure the built-in DHCP Server to assign IP addresses to the computers and other devices on your local area network (LAN). 
#From:LW64,Start the wizard. 
LW64,마법사를 시작하십시오. 
#From:wps.LW13,Add Wireless Device WITH WPS (WI-FI PROTECTED SETUP) Wizard 
wps.LW13,무선 장비 WITH WPS (WI-FI PROTECTED SETUP) 마법사를 추가하십시오. 
#From:sl.Critical,Critical 
sl.Critical,중요도 높음
#From:.days,Day(s) 
.days,Day(s) 
#From:SYSTEM_LOG_INACTIVE,System LOG is inactive 
SYSTEM_LOG_INACTIVE,시스템 LOG 가 동작하지 않습니다. 
#From:sc.intro.sv,The new settings have been saved. 
sc.intro.sv,새로운 설정이 저장되었습니다. 
#From:bwn.mici,My Internet Connection is 
bwn.mici,내 인터넷 연결 
#From:at.intro,Use this section to configure D-Link's QoS Engine powered by StreamEngine&trade; Technology. The QoS Engine improves your online gaming experience by ensuring that your game traffic is prioritized over other network traffic, such as FTP or Web. 
at.intro,StreamEngine&trade; 기술이 적용되는 디링크 QoS 엔진 기능을 설정하십시오. QoS 엔진 기능으로 FTP 또는 웹 같은 네트워크 트래픽 보다 온라인 게임에 우선 순위를 부여하여 온라인 게임을 즐길 수 있습니다. 
#From:help852,If the router loses power for any reason, it cannot keep its clock running, and will not have the correct time when it is started again. To maintain correct time for schedules and logs, either you must enter the correct time after you restart the router, or you must enable the NTP Server option. 
help852,If the router loses power for any reason, it cannot keep its clock running, and will not have the correct time when it is started again. To maintain correct time for schedules and logs, either you must enter the correct time after you restart the router, or you must enable the NTP Server option. 
#From:gw.mins,Minutes 
gw.mins,분
#From:help103,Specifies whether the entry will be enabled or disabled. 
help103,Specifies whether the entry will be enabled or disabled. 
#From:YM183,- 
YM183,- 
#From:YM117,Invalid Group Key Update Interval. 
YM117,그룹 키 업데이트 주기가 잘못되었습니다. 
#From:KR54,Formerly, the terms "Full Cone", "Restricted Cone", "Port Restricted Cone" and "Symmetric" were used to refer to different variations of NATs. These terms are purposely not used here, because they do not fully describe the behavior of this router's NAT. 
KR54,"Full Cone", "Restricted Cone", "Port Restricted Cone", "Symmetric"이 라는 용어들은 NAT의 여러 가지 종류를 말합니다. 이런 용어만으로는 공유기의 NAT 동작을 충분히 설명하기 어려우므로 여기서는 상세히 설명하지 않습니다. 
#From:.In,In 
.In,In 
#From:help457,A newer version of the PC Card or PCMCIA interface. It supports a 32-bit data path, DMA, and consumes less voltage 
help457,A newer version of the PC Card or PCMCIA interface. It supports a 32-bit data path, DMA, and consumes less voltage 
#From:help870,Select this option if you want logs to be sent by email according to a schedule. 
help870,Select this option if you want logs to be sent by email according to a schedule. 
#From:av.intro.r,This Routing page allows you to specify custom routes that determine how data is moved around your network. 
av.intro.r,라우팅 설정으로 데이터가 이동하는 일반적인 경로를 설정할 수 있습니다.
#From:help797,Firewall and Security 
help797,Firewall and Security 
#From:gw.gm.74,MSN Game Zone (DX) 
gw.gm.74,MSN Game Zone (DX) 
#From:gw.gm.39,Rainbow Six 
gw.gm.39,Rainbow Six 
#From:help368,64-bit hexadecimal keys are exactly 10 characters in length. (12345678FA is a valid string of 10 characters for 64-bit encryption.) 
help368,64-bit hexadecimal keys are exactly 10 characters in length. (12345678FA is a valid string of 10 characters for 64-bit encryption.) 
#From:help666,Rendezvous 
help666,Rendezvous 
#From:wwl.alert.pv5.3_10,WEP key must be exactly 10 hexadecimal digits (0-9 or A-F). 
wwl.alert.pv5.3_10,WEP 키는 정확하게 10 자리 헥사 값을 입력하십시오.(0-9, A-F)
#From:help149,The MAC address filter section can be used to filter network access by machines based on the unique MAC addresses of their network adapter(s). 
help149,The MAC address filter section can be used to filter network access by machines based on the unique MAC addresses of their network adapter(s). 
#From:hhav.enable,Each route has a check box next to it, check this box if you want the route to be enabled. 
hhav.enable,각 경로에는 체크 박스가 있습니다.  해당 경로를 설정하고 싶으시면 그 박스에 체크하십시오. 
#From:hhpt.intro,Use this feature if you are trying to execute one of the listed network applications and it is not communicating as expected. 
hhpt.intro,열거 되어 있는 응용프로그램을 실행했는데 예상대로 동작되지 않는 경우에 이 기능을 사용하십시오. 
#From:GW_WAN_CARRIER_DETECTED,WAN interface cable has been connected 
GW_WAN_CARRIER_DETECTED,WAN 인터페이스 케이블이 연결되었습니다. 
#From:help698,Secure Shell is a command line interface that allows for secure connections to remote computers 
help698,Secure Shell is a command line interface that allows for secure connections to remote computers 
#From:bwn.BPU,BigPond User Id 
bwn.BPU,BigPond 사용자 Id
#From:help538,GUI 
help538,GUI 
#From:help195,Select this option if you want this schedule in effect all day for the selected day(s). 
help195,Select this option if you want this schedule in effect all day for the selected day(s). 
#From:GW_WAN_DNS_SERVERS_INVALID,DNS Servers must be configured. 
GW_WAN_DNS_SERVERS_INVALID,DNS 서버를 반드시 설정해 주십시오. 
#From:help823.1,The initial value of Time Out depends on the type and state of the connection. 
help823.1,The initial value of Time Out depends on the type and state of the connection. 
#From:.internetc,Internet Connection 
.internetc,인터넷 연결
#From:tsc.pingt.msg5,Resolved to 
tsc.pingt.msg5,Resolved to 
#From:help172,Enter a name for the rule that is meaningful to you. 
help172,Enter a name for the rule that is meaningful to you. 
#From:.trigger,Trigger 
.trigger,트리거
#From:help783,The Ethernet ID (MAC address) of the wireless client. 
help783,The Ethernet ID (MAC address) of the wireless client. 
#From:ub.intro.2,The Gateway will not be reprogrammed. 
ub.intro.2,게이트웨이가 수정 되었습니다. 
#From:.rs.succeeded,Restore Succeeded 
.rs.succeeded,복구 되었습니다. 
#From:GW_WAN_PPTP_USERNAME_INVALID,A PPTP user name MUST be specified 
GW_WAN_PPTP_USERNAME_INVALID,PPTP 사용자명을 반드시 입력해 주십시오. 
#From:hhta.pw,For security reasons, it is recommended that you change the password for the Admin and User accounts. Be sure to write down the new and passwords to avoid having to reset the router in case they are forgotten. 
hhta.pw,보안을 위해, 관리자와 사용자용 비밀번호를 변경하실 것을 권장합니다. 비밀번호 분실을 방지하기 위해 새로운 비밀번호를 기록해 두십시오.
#From:GW_WAN_L2TP_IP_ADDRESS_INVALID,Invalid L2TP IP address: %v 
GW_WAN_L2TP_IP_ADDRESS_INVALID,L2TP IP 주소: %v 가 잘못되었습니다. 
#From:help771,Status Help 
help771,Status Help 
#From:.aa.wiz.s8.title,Step 6: Configure Web Access Logging 
.aa.wiz.s8.title,Step 6: 웹 접속 로깅 설정
#From:help173,The rule can either Allow or Deny messages. 
help173,The rule can either Allow or Deny messages. 
#From:GW_INET_ACL_NAME_INVALID,Name can not be empty string. 
GW_INET_ACL_NAME_INVALID,이름란을 비워 두지 마십시오. 
#From:tsl.SLSIPA,Syslog Server IP Address 
tsl.SLSIPA,시스템 로그 서버 IP 주소 
#From:.aa.wiz.s7.msg,Add Port Filters Rules. 
.aa.wiz.s7.msg,포트 필터 규칙 추가 
#From:days,Days 
days,일
#From:tt.time.13,12 pm 
tt.time.13,12 pm 
#From:up.tz.67,(GMT+10:00) Guam, Port Moresby 
up.tz.67,(GMT+10:00) Guam, Port Moresby 
#From:up.tz.29,(GMT+01:00) Sarajevo, Skopje, Sofija, Vilnus, Zagreb 
up.tz.29,(GMT+01:00) Sarajevo, Skopje, Sofija, Vilnus, Zagreb 
#From:help289a,Primary DNS Server, Secondary DNS Server 
help289a,Primary DNS Server, Secondary DNS Server 
#From:BIGPOND_LOGGED_IN,BigPond logged in 
BIGPOND_LOGGED_IN,BigPond 로긴하였습니다. 
#From:help630,Network Layer 
help630,Network Layer 
#From:haf.dmz.10,When a LAN host is configured as a DMZ host, it becomes the destination for all incoming packets that do not match some other incoming session or rule. If any other ingress rule is in place, that will be used instead of sending packets to the DMZ host; so, an active session, virtual server, active port trigger, or port forwarding rule will take priority over sending a packet to the DMZ host. (The DMZ policy resembles a default port forwarding rule that forwards every port that is not specifically sent anywhere else.) 
haf.dmz.10,DMZ 호스트로 설정된 경우, 일부 다른 수신 세션 또는 수신 규칙과 맞지 않는 모든 수신 패킷의 목적지가 됩니다. 다른 수신 규칙이 있는 경우는, DMZ 호스트로 보내는 대신 그 규칙이 사용됩니다. 즉, 액티브 세션, 가상 서버, 액티브 포트 트리거, 포트 포워딩 규칙등이 패킷을 DMZ 호스트로 보내는 것보다 우선 순위가 높다는 의미입니다.(DMZ 정책은 모든 포트를 포워드하는 디폴트 포트 포워딩 규칙과 비슷합니다.)
#From:help819,State for sessions that use the TCP protocol. 
help819,State for sessions that use the TCP protocol. 
#From:sps.tcpport,TCP Port 
sps.tcpport,TCP 포트
#From:wprn.s3b,If the progress bar did not appear, the setup executable did not launch and setup is not yet complete. Refer to the Troubleshooting Tips section below. 
wprn.s3b,진행 사항이 나타나지 않으면, 설정 실행이 시작되지 않았고, 아직 완료되지 않은 것입니다. 아래에 있는 장애처리 방법을 참고하십시오.
#From:KR88,This is an advanced setting and is normally left blank. This allows the configuration of a NetBIOS 'domain' name under which network hosts operate. 
KR88,이 설정은 고급 설정으로 일반적으로 설정하지 않습니다.  동작하고 있는 네트워크 호스트 아래에서 NetBIOS 'domain' 이름을 설정할 수 있습니다.
#From:help422,7th Layer of the OSI model. Provides services to applications to ensure that they can communicate properly with other applications on a network. 
help422,7th Layer of the OSI model. Provides services to applications to ensure that they can communicate properly with other applications on a network. 
#From:.websfilter,Website Filter 
.websfilter,웹사이트 필터
#From:sd.BPSN,BigPond Server Name 
sd.BPSN,BigPond 서버명
#From:GW_WAN_PPPOE_IP_ADDRESS_INVALID,Invalid PPPoE IP address: %v 
GW_WAN_PPPOE_IP_ADDRESS_INVALID,PPPoE IP 주소: %v 가 잘못되었습니다. 
#From:.password_user,User Password 
.password_user,사용자 비밀번호
#From:GW_INET_ACCESS_POLICY_END_IP,Policy %s stopped; Internet access for IP address %v changed to: %s 
GW_INET_ACCESS_POLICY_END_IP,정책 %s 이 중단되었습니다; 인터넷 접속을 위한 IP 주소 %v 가 : %s 로 변경되었습니다. 
#From:bwn.msg.Modes,Choose the mode to be used by the router to connect to the Internet. 
bwn.msg.Modes,인터넷에 연결되어 있는 공유기에서 사용되는 모드를 선택하십시오. 
#From:up.gX.1,The IP address " + mf.dmz_address.value + " is not valid. 
up.gX.1,IP 주소 " + mf.dmz_address.value + " 가 잘못되었습니다. 
#From:.next,Next 
.next,다음 
#From:.setup,Setup 
.setup,설정
#From:KR19,For good security it should be of ample length and should not be a commonly known phrase. 
KR19,보안을 높이기 위해, 길이가 충분히 길어야 하고 일반적으로 사용되지 않는 것이어야 합니다. 
#From:htsc.pingt.s,The host is pinged repeatedly until you press this button. 
htsc.pingt.s,핑을 중단하시려면 이 버튼을 누르십시오. 
#From:EMAIL,Email 
EMAIL,이메일
#From:help493,Direct Sequence Spread Spectrum 
help493,Direct Sequence Spread Spectrum 
#From:RATE_ESTIMATOR_RATE_COMPLETED_WITH_SPEED,Rate estimation completed. Upstream speed is %u kbps 
RATE_ESTIMATOR_RATE_COMPLETED_WITH_SPEED,속도 측정이 완료되었습니다. 업로드 속도는 %u kbps 입니다. 
#From:.mode,Mode 
.mode,모드
#From:YM27,Invalid Beacon Period 
YM27,비컨(Beacon) 주기가 잘못되었습니다. 
#From:LT291wifisc,This area of the screen reflects configuration settings from the <a href="../Basic/Wireless.shtml">Setup &rarr; Wireless Settings</a> page and the <a href="../Advanced/Protected_Setup.shtml">Advanced &rarr; Wi-Fi Protected Setup</a> page. The <span class="option">MAC Address</span> is the factory-assigned identifier of the wireless card. 
LT291wifisc,<a href="../Basic/Wireless.shtml">Setup &rarr; Wireless Settings</a> 페이지와 the <a href="../Advanced/Protected_Setup.shtml">Advanced &rarr; Wi-Fi Protected Setup</a> 페이지에서 설정한 값을 여기에서 확인할 수 있습니다.  <span class="option">MAC Address</span> 주소는 제조업체에서 무선 랜카드에 부여한 고유한 ID 입니다. 
#From:tt.Feb,Feb 
tt.Feb,Feb 
#From:KR1,Port Filter name 
KR1,포트 필터 이름
#From:sps.raw1,Use this information to configure your computer for raw TCP port printing. 
sps.raw1,Raw TCP 포트 프린팅을 설정하기 위해서 이 정보를 사용하십시오. 
#From:GW_DYNDNS_SUCCESS,Successfully updated dynamic DNS entry for %s 
GW_DYNDNS_SUCCESS,%s 를 위한 DDNS 엔트리를 성공적으로 업데이트되었습니다. 
#From:GW_PURE_SETMACFILTERS2,HNAP SetMACFilters2 
GW_PURE_SETMACFILTERS2,HNAP SetMACFilters2 
#From:IPPORTFORWARDALG_TCP_PACKET_ALLOC_FAILURE,Port forwarding ALG failed to allocate session for TCP packet from %v:%u to %v:%u 
IPPORTFORWARDALG_TCP_PACKET_ALLOC_FAILURE,포트 포워딩 ALG가 %v:%u 에서 %v:%u 로의 TCP 패킷 세션 할당에 실패하였습니다.  
#From:IGMP_ROUTER_LOW_RESOURCES,IGMP router has rejected group %v due to low system resources 
IGMP_ROUTER_LOW_RESOURCES,IGMP 라우터가 낮은 시스템 리소스 때문에 그룹 %v 을 거부하였습니다. 
#From:bwl.CWM.h1,The "Auto 20/40 MHz" option is usually best. 
bwl.CWM.h1,"Auto 20/40 MHz" 옵션이 일반적으로 사용하기에 가장 좋습니다.
#From:up.tz.39,(GMT+03:00) Moscow, St. Petersburg, Volgograd 
up.tz.39,(GMT+03:00) Moscow, St. Petersburg, Volgograd 
#From:help40,Allows devices and applications using VoIP (Voice over IP) to communicate across NAT. Some VoIP applications and devices have the ability to discover NAT devices and work around them. This ALG may interfere with the operation of such devices. If you are having trouble making VoIP calls, try turning this ALG off. 
help40,Allows devices and applications using VoIP (Voice over IP) to communicate across NAT. Some VoIP applications and devices have the ability to discover NAT devices and work around them. This ALG may interfere with the operation of such devices. If you are having trouble making VoIP calls, try turning this ALG off. 
#From:YM51,Rule \' 
YM51,Rule \' 
#From:ZM13,Send/Receive heartbeat 
ZM13,송/수신 heartbeat
#From:GW_LAN_PRIMARY_DNS_INVALID,Primary DNS is invalid. 
GW_LAN_PRIMARY_DNS_INVALID,1차 DNS가 잘못되었습니다. 
#From:td.intro.DDNS.DLINK,Sign up for D-Link's Free DDNS service at 
td.intro.DDNS.DLINK,D-Link 무료 DDNS 서비스에 가입하십시오. 
#From:.pf,Port Forwarding 
.pf,포트 포워딩
#From:IPNAT_UDP_UNABLE_TO_HANDLE_HEADER,Dropped UDP packet from %v to %v as unable handle packet header 
IPNAT_UDP_UNABLE_TO_HANDLE_HEADER,패킷 헤더를 처리할 수 없어 %v 에서  %v 로의 UDP 패킷이 폐기되었습니다. 
#From:GW_WLAN_11A_DFS_TURBO_INVALID,Can not use Turbo in 11a mode. 
GW_WLAN_11A_DFS_TURBO_INVALID,11a 모드에서 Turbo를 사용할 수 없습니다. 
#From:GW_INET_ACCESS_INITIAL_MAC,Internet access for MAC address %m set to: %s 
GW_INET_ACCESS_INITIAL_MAC,인터넷 접속을 위한 MAC 주소 %m가 %s 로 설정되었습니다. 
#From:IPPPPCHAP_AUTH_SUCCESS,CHAP authentication successful. 
IPPPPCHAP_AUTH_SUCCESS,CHAP 인증 성공
#From:help187,Normally the wireless transmitter operates at 100% power. In some circumstances, however, there might be a need to isolate specific frequencies to a smaller area. By reducing the power of the radio, you can prevent transmissions from reaching beyond your corporate/home office or designated wireless area. 
help187,Normally the wireless transmitter operates at 100% power. In some circumstances, however, there might be a need to isolate specific frequencies to a smaller area. By reducing the power of the radio, you can prevent transmissions from reaching beyond your corporate/home office or designated wireless area. 
#From:.aa.block.all,Block All Access 
.aa.block.all,모든 접속 차단
#From:YM123,Changing your Wireless Network Name is the first step in securing your wireless network. Change it to a familiar name that does not contain any personal information. 
YM123,무선 네트워크 이름을 변경하는 것이 무선 네트워크 보호의 첫번째 단계입니다. 개인 정보를 제외한 것중에서 익숙한 이름으로 무선 네트워크 이름을 변경하십시오. 
#From:GW_WLAN_LINK_DOWN,Wireless Link is down 
GW_WLAN_LINK_DOWN,무선 링크가 다운되었습니다.
#From:help379,The amount of time before the group key used for broadcast and multicast data is changed. 
help379,The amount of time before the group key used for broadcast and multicast data is changed. 
#From:up.tz.70,(GMT+11:00) Magadan, Solomon Is., New Caledonia 
up.tz.70,(GMT+11:00) Magadan, Solomon Is., New Caledonia 
#From:help507,Dynamic DNS service 
help507,Dynamic DNS service 
#From:TA8,If you have devices on your network that should always have fixed IP addresses, add a <strong>DHCP Reservation </strong> for each such device. 
TA8,항상 고정 IP를 사용해야 하는 장비가 있는 경우, 각 장비에 <strong>DHCP Reservation </strong> 를 추가하십시오. 
#From:KR9,Invalid IP address for virtual server 
KR9,가상 서버의 IP 주소가 잘못되었습니다. 
#From:KR79,For example, 192.168.0.1. 
KR79,예: 192.168.0.1.
#From:GW_QOS_RULES_REMOTE_IP,'%s': Remote IP start, '%v' ,must be less than remote IP end, '%v' 
GW_QOS_RULES_REMOTE_IP,%s': 원격지 시작 IP , '%v' 는 원격지 마지막 IP , '%v' 보다 적어야 합니다. 
#From:fb.p.2,This page is not included in the router's Allowed Web Site List. 
fb.p.2,이 웹 사이트 공유기의 허용 웹 사이트 리스트에 없습니다. 
#From:.aa.bsecure.age.adult,Adult (18+) 
.aa.bsecure.age.adult,성인 (18+)
#From:ZM7,Uninitalized 
ZM7,초기화되지 않았습니다. 
#From:help571,Internet Explorer 
help571,인터넷 익스플로러
#From:sps.ps,Printer Status 
sps.ps,프린터 상태
#From:RATE_ESTIMATOR_CONVERGENCE_ERROR,Rate estimation aborted as measurements failed to converge 
RATE_ESTIMATOR_CONVERGENCE_ERROR,측정수치 통합 실패로 속도 측정이 중단되었습니다. 
#From:YM23,Destination Port Start should not be greater than Destination Port End for Port Filter 
YM23,목적지 시작 포트는 포트 필터의 목적지 마지막 주소보다 반드시 커야 합니다. 
#From:help47,You need to configure your router to allow a software application running on any computer on your network to connect to a web-based server or another user on the Internet. 
help47,You need to configure your router to allow a software application running on any computer on your network to connect to a web-based server or another user on the Internet. 
#From:tt.time.18,5 pm 
tt.time.18,5 pm 
#From:wwa.title.s4,Step 4: Save Settings and Connect 
wwa.title.s4,Step 4: 설정을 저장하고 연결하십시오. 
#From:help860,When this option is enabled, router activity logs or firmware upgrade notifications can be emailed to a designated email address, and the following parameters are displayed. 
help860,When this option is enabled, router activity logs or firmware upgrade notifications can be emailed to a designated email address, and the following parameters are displayed. 
#From:GW_PURE_REBOOT,HNAP Reboot 
GW_PURE_REBOOT,HNAP 리부팅 
#From:wwa.intro.s4,The Internet Connection Setup Wizard has completed. Click the Connect button to save your settings and reboot the router. 
wwa.intro.s4,인터넷 연결 설정 마법사가 완료되었습니다. 연결 버튼을 눌러 설정을 저장하고 공유기를 다시 시작하십시오. 
#From:help487,A predetermined value or setting that is used by a program when no user input has been entered for this value or setting 
help487,A predetermined value or setting that is used by a program when no user input has been entered for this value or setting 
#From:help267,Some ISP's may require that you enter a Service Name. Only enter a Service Name if your ISP requires one. 
help267,Some ISP's may require that you enter a Service Name. Only enter a Service Name if your ISP requires one. 
#From:IPL2TP_SESSION_ABORTED,L2TP local session 0x%04X aborted 
IPL2TP_SESSION_ABORTED,L2TP 로컬 세션 0x%04X 이 중단되었습니다. 
#From:tf.USSW,Note: Some firmware upgrades reset the router's configuration options to the factory defaults.\n Before performing an upgrade, be sure to save the current configuration from the Tools-System screen.\n Do you still want to upgrade? 
tf.USSW,주의 : 일부 펌웨어 업그레이드로 인해 공유기 설정이 공장 초기화 값으로 리셋될 수 있습니다. \n 펌웨어 업그레이드를 실행하기 전에, 도구 -> 시스템 화면에서 현재 설정을 저장하는 것을 잊지 마십시오. \n 업그레이드 하시겠습니까? 
#From:help874,This section allows you to manage the router's configuration settings, reboot the router, and restore the router to the factory default settings. Restoring the unit to the factory default settings will erase all settings, including any rules that you've created. 
help874,This section allows you to manage the router's configuration settings, reboot the router, and restore the router to the factory default settings. Restoring the unit to the factory default settings will erase all settings, including any rules that you've created. 
#From:rb.change,If you changed the IP address of the router you will need to change the IP address in your browser before accessing the configuration Web site again. 
rb.change,공유기의 IP 주소를 변경하면, 관리 웹 화면으로 다시 접속하기 전에 웹 창에 변경된 IP 주소를 입력하시기 바랍니다.
#From:help78,Enable this option for better performance and experience with online games and other interactive applications, such as VoIP. 
help78,좋은 성능과 온라인 게임, VoIP와 같은 응용프로그램을 위해 이 옵션을 설정하십시오. 
#From:YM73,Enable WISH 
YM73,WISH 설정
#From:tt.Sep,Sep 
tt.Sep,Sep 
#From:IPSEC_ALG_ESP_UNABLE_TO_HANDLE_HEADER,Dropped ESP packet from %v to %v as unable handle packet header 
IPSEC_ALG_ESP_UNABLE_TO_HANDLE_HEADER,패킷 헤더를 처리할 수 없어 %v 에서  %v 로의 ESP 패킷이 폐기되었습니다. 
#From:LS425,Expires 
LS425,기간만료
#From:wwl.WK,Wep Key 
wwl.WK,Wep Key 
#From:help624,NetBIOS Extended User Interface is a Local Area Network communication protocol. This is an updated version of NetBIOS 
help624,NetBIOS Extended User Interface is a Local Area Network communication protocol. This is an updated version of NetBIOS 
#From:bws.GKUI,Group Key Update Interval 
bws.GKUI,그룹 키 업데이트 주기
#From:hhaw.wmm,Enabling <strong>WMM</strong> can help control latency and jitter when transmitting multimedia content over a wireless connection. 
hhaw.wmm,<strong>WMM</strong> 설정으로 무선으로 멀티미디어를 전송할 때 지연과 지터를 줄일 수 있습니다.
#From:help168c,In these cases, you can use Inbound Filters to limit that exposure by specifying the IP addresses of internet hosts that you trust to access your LAN through the ports that you have opened. You might, for example, only allow access to a game server on your home LAN from the computers of friends whom you have invited to play the games on that server. 
help168c,In these cases, you can use Inbound Filters to limit that exposure by specifying the IP addresses of internet hosts that you trust to access your LAN through the ports that you have opened. You might, for example, only allow access to a game server on your home LAN from the computers of friends whom you have invited to play the games on that server. 
#From:LW11,Generate New PIN 
LW11,새로운 PIN 을 생성합니다. 
#From:GW_NAT_PPTP_ALG_ACTIVATED_WARNING,<warn>The PPTP ALG has been automatically enabled because a virtual server entry you created requires it.</warn> 
GW_NAT_PPTP_ALG_ACTIVATED_WARNING,<warn>생성한 가상 서버 엔트리 때문에 PPTP ALG가 자동으로 설정되었습니다.</warn>
#From:YM35,Are you sure you want to delete 
YM35,정말로 삭제 하시겠습니까? 
#From:tsc.sel_days,Select Day(s) 
tsc.sel_days,요일 선택
#From:BIGPOND_LOGGING_IN,BigPond logging in 
BIGPOND_LOGGING_IN,BigPond 로긴
#From:sc.intro.rb4,The router must be rebooted before the restored settings will take effect. You can reboot now, or you can continue to make other changes and reboot later. 
sc.intro.rb4,설정을 복구하기 전에 반드시 공유기를 재시작해야 설정이 적용됩니다. 지금 다시 시작할 수도 있도, 다른 사항을 변경한 후에 나중에 다시 시작하셔도 됩니다.
#From:wwa.wanmode.pptp,Username / Password Connection (PPTP) 
wwa.wanmode.pptp,사용자명 / 비밀번호 연결 (PPTP)
#From:help543,Data cannot be transmitted and received at the same time 
help543,Data cannot be transmitted and received at the same time 
#From:help816,The IP address and, where appropriate, port number of the application on the Internet. 
help816,The IP address and, where appropriate, port number of the application on the Internet. 
#From:GW_SCHEDULES_TIME_INVALID,Invalid Time for schedule name: '%s' 
GW_SCHEDULES_TIME_INVALID,스케쥴 명: '%s' 시간이 잘못되었습니다. 
#From:help700,Service Set Identifier is a name for a wireless network 
help700,Service Set Identifier is a name for a wireless network 
#From:help58,Range (50-100) 
help58,범위지정 (50-100) 
#From:GW_DHCP_SERVER_LEASE_TIME_INVALID,Lease time is invalid (must be 1 to 65535) 
GW_DHCP_SERVER_LEASE_TIME_INVALID,갱신 시간이 잘못되었습니다. (1 ~65535)
#From:help885,This option will check D-Link's support site to see if you have the latest version of the firmware available. If a newer version is available, download instructions will be displayed. 
help885,This option will check D-Link's support site to see if you have the latest version of the firmware available. If a newer version is available, download instructions will be displayed. 
#From:IPSMTPCLIENT_NO_SERVER_IP_ADDRESS,Unable to send email since server IP address could not resolved 
IPSMTPCLIENT_NO_SERVER_IP_ADDRESS,서버 IP 주소를 확인할 수 없어 이메일을 보낼 수 없습니다. 
#From:KR10,Private port should be in range (1..65535) for virtual server 
KR10,가상 서버용 사설 포트 범위는 1..65535 입니다. 
#From:ddns.connected,Connected 
ddns.connected,연결되었습니다. 
#From:GW_WEB_FILTER_HTTPS_NOT_SUPPORTED_INVALID,https is not a supported protocol. 
GW_WEB_FILTER_HTTPS_NOT_SUPPORTED_INVALID,https 지원되지 않는 프로토콜입니다. 
#From:ub.Upload_Failed,Upload Failed 
ub.Upload_Failed,업로드에 실패하였습니다. 
#From:.vs.both,Both 
.vs.both,Both 
#From:help278,PPTP (Point to Point Tunneling Protocol) uses a virtual private network to connect to your ISP. This method of connection is primarily used in Europe. This method of connection requires you to enter a <span class="option">Username</span> and <span class="option">Password</span> (provided by your Internet Service Provider) to gain access to the Internet. 
help278,PPTP (Point to Point Tunneling Protocol) uses a virtual private network to connect to your ISP. This method of connection is primarily used in Europe. This method of connection requires you to enter a <span class="option">Username</span> and <span class="option">Password</span> (provided by your Internet Service Provider) to gain access to the Internet. 
#From:help460,Client 
help460,Client 
#From:hhts.def,A System Logger (syslog) is a server that collects in one place the logs from different sources. If the LAN includes a syslog server, you can use this option to send the router's logs to that server. 
hhts.def,시스템 로그는 여러 곳에서 발생하는 로그를 한곳에 모으는 서버입니다. 시스템 로그 서버에 설치되어 있으면, 공유기 로그를 서버로 보내기 위해서 이 옵션을 사용하십시오.
#From:htsc.pingt.h,Enter either the IP address of the target computer or enter its fully qualified domain name. 
htsc.pingt.h,목적지 PC의 IP 주소 또는 유효한 도메인 명을 입력 하십시오. 
#From:help255,Used when your ISP provides you a set IP address that does not change. The IP information is manually entered in your IP configuration settings. You must enter the 
help255,Used when your ISP provides you a set IP address that does not change. The IP information is manually entered in your IP configuration settings. You must enter the 
#From:bws.2RSP,Second RADIUS server Port 
bws.2RSP,2차 RADIUS 서버 포트
#From:wwl.alert.pv5.4,The Wireless Security Password must be at least 8 characters. 
wwl.alert.pv5.4,무선 보안 비밀번호는 최소 8 문자입니다. 
#From:GW_WIFISC_LOCK_VERIFY_ERR,AP should not be locked before configuring. 
GW_WIFISC_LOCK_VERIFY_ERR,설정 하기 전에는 AP가 비활성화 되어서는 안됩니다. 
#From:LW53,Wireless frames can be divided into smaller units (fragments) to improve performance in the presence of RF interference and at the limits of RF coverage. 
LW53,RF 간섭이 있거나 RF 커버 영역에 제한이 있는 경우, 무선 프레임을 작은 단위로 나누어 성능을 향상 시킬 수 있습니다. 
#From:help7,Enter the Private Port as [80] 
help7,Enter the Private Port as [80] 
#From:bwl.VS.0,Visible 
bwl.VS.0,사용안함
#From:GW_WEB_FILTER_WEB_SITE_IS_USED_INVALID,The web site address '%s' already used. 
GW_WEB_FILTER_WEB_SITE_IS_USED_INVALID,웹 사이트 '%s' 는 이미 사용중입니다. 
#From:af.TEFT,TCP Endpoint Filtering 
af.TEFT,TCP 엔드포인트 필터링
#From:YM64,invalid source starting IP Address. 
YM64,소스 시작 IP 주소가 잘못되었습니다. 
#From:GW_PURE_DELETEPORTMAPPING_DELETE,HNAP DeletePortMapping %s:%d deleted %dth virtual server entry '%s' %v:%d<->%v:%d %S 
GW_PURE_DELETEPORTMAPPING_DELETE,HNAP DeletePortMapping %s:%d 가 %dth 가상 서버 엔트리 '%s' %v:%d<->%v:%d %S 를 삭제하였습니다. 
#From:help86,When <span class="option">Connection Type</span> is set to <span class="option"> Auto-detect</span>, the automatically detected connection type is displayed here. 
help86,When <span class="option">Connection Type</span> is set to <span class="option"> Auto-detect</span>, the automatically detected connection type is displayed here. 
#From:sd.NNSSID,Network Name (SSID) 
sd.NNSSID,네트워크 이름 (SSID)
#From:GW_ROUTES_INTERFACE_INVALID,Route interface is invalid 
GW_ROUTES_INTERFACE_INVALID,루트 인터페이스가 유효하지 않습니다. 
#From:GW_LAN_SECONDARY_DNS_INVALID,Secondary DNS is invalid. 
GW_LAN_SECONDARY_DNS_INVALID,2차 DNS가 잘못되었습니다. 
#From:bd.NETBIOS_LEARN_FROM_WAN_ENABLE,Learn NetBIOS from WAN 
bd.NETBIOS_LEARN_FROM_WAN_ENABLE,WAN NetBIOS
#From:.gateway,Gateway 
.gateway,게이트 웨이 
#From:tt.CurTime,Current Router Time 
tt.CurTime,현재 공유기 시간
#From:GW_NAT_PORT_FORWARDING_TABLE_RECONFIGURED_WARNING,<warn>Port Forwarding Table is being reconfigured because the LAN subnet has been changed.</warn> 
GW_NAT_PORT_FORWARDING_TABLE_RECONFIGURED_WARNING,<warn>LAN 서브넷이 변경되었기 때문에 포트 포워딩 테이블이 다시 구성됩니다. </warn>
#From:ub.intro.3,If the uploaded file is correct, it is possible that the device may be too busy to properly receive it right now. In this case, please try the upload again. It is also possible that you are logged in as a 'user' instead of an 'admin' - only administrators can upload new firmware. 
ub.intro.3,파일을 업로드할 경우, 공유기의 처리량이 많아 해당 파일을 수신하기에 매우 바쁠 수도 있습니다. 이 경우, 업로드를 다시 시도하시기 바랍니다. '관리자' 계정 대신에 '사용자' 계정으로 로긴할 수도 있지만, 관리자 계정으로만 새로운 펌웨어를 업로드할 수 있습니다.
#From:.AM,AM 
.AM,AM 
#From:KR15,802.11 Band 
KR15,802.11 Band 
#From:WIFISC_AP_REGISTRATION_UNEXPECTED_EVENT,AP failed to registere to Registrar (%s) through %s, unexpected (%s), at state (%s) 
WIFISC_AP_REGISTRATION_UNEXPECTED_EVENT,AP Registrar (%s) through %s, unexpected (%s), at state (%s) 등록에 실패하였습니다. 
#From:DISCONNECTED,Disconnected 
DISCONNECTED,연결이 끊어졌습니다. 
#From:up.tz.22,(GMT-01:00) Azores 
up.tz.22,(GMT-01:00) Azores 
#From:help730,Unshielded Twisted Pair 
help730,Unshielded Twisted Pair 
#From:gw.gm.47,Soldier of Fortune 
gw.gm.47,Soldier of Fortune 
#From:GW_SYSLOG_ADDRESS_NOT_IN_SUBNET_WARNING,<warn>Syslog server IP address is no longer in the LAN subnet, this may need to be reconfigured.</warn> 
GW_SYSLOG_ADDRESS_NOT_IN_SUBNET_WARNING,<warn>시스템 로그 IP 주소가 LAN 서브넷에 없습니다.  다시 설정해 주십시오. </warn>
#From:GW_DHCP_SERVER_NETBIOS_SECONDARY_WINS_INVALID,Invalid secondary WINS IP address 
GW_DHCP_SERVER_NETBIOS_SECONDARY_WINS_INVALID,2차 WINS IP 주소가 잘못되었습니다. 
#From:LW49,Note that this feature does not apply to the DMZ host (if one is enabled). The DMZ host always handles these kinds of sessions. 
LW49,이 기능은 DMZ 호스트(설정 된 경우)에는 적용되지 않음을 알려드립니다. DMZ 호스트는 항상 이런 종류의 세션을 처리합니다. 
#From:KR95,Add/Update Schedule Rule 
KR95,추가/업데이트 스케쥴 규칙 
#From:aw.8,8 Kbytes 
aw.8,8 Kbytes 
#From:YM114,Invalid secondary DNS server IP address 
YM114,2차 DNS 서버 IP 주소가 잘못되었습니다. 
#From:GW_DYNDNS_UPDATE_IP,WAN IP changed to %v, updating to dynamic DNS provider 
GW_DYNDNS_UPDATE_IP,WAN IP가 %v로 변경되었습니다. DDNS 공급업체에 업데이트합니다.  
#From:.pwsame,Please make the two passwords the same and try again 
.pwsame,두 개의 비밀번호가 같은지 확인하시고 다시 시도하십시오. 
#From:bws.CT,Cipher Type 
bws.CT,암호화 유형
#From:.aa.bsecure.rrated,R-rated 
.aa.bsecure.rrated,R 등급 
#From:as.WM,Windows/MSN Messenger 
as.WM,Windows/MSN Messenger 
#From:LW6,Lock Wireless Security Settings 
LW6,무선 보안 설정 잠금 
#From:up.tz.03,(GMT-09:00) Alaska 
up.tz.03,(GMT-09:00) Alaska 
#From:bws.msg.WEP.2,You may also enter any text string into a WEP key box, in which case it will be converted into a hexadecimal key using the ASCII values of the characters. A maximum of 5 text characters can be entered for 64 bit keys, and a maximum of 13 characters for 128 bit keys. 
bws.msg.WEP.2,WEP 키 박스안에 입력한 텍스트 문자열은 ASCII 값을 사용하여 HEX 값로 전환됩니다. 64bit 키는 일반 상용문자 5자를 입력해야 하며, 128btit 키는 일반 상용문자 13자를 입력해야 합니다. 
#From:help502,To send a request from one computer to another and have the file transmitted back to the requesting computer 
help502,To send a request from one computer to another and have the file transmitted back to the requesting computer 
#From:ta.msg.TW,Please enter the same password into both boxes, for confirmation. 
ta.msg.TW,박스안에 동일한 비밀번호를 입력하여 확인하십시오. 
#From:help774,Depending on the type of WAN connection, you can take one of the following sets of actions: 
help774,Depending on the type of WAN connection, you can take one of the following sets of actions: 
#From:wps.p3.3,-PBC (Push Button Configuration) 
wps.p3.3,PBC (Push Button Configuration)
#From:GW_QOS_RULES_LOCAL_IP,'%s': Local IP start, '%v', must be less than local IP end, '%v' 
GW_QOS_RULES_LOCAL_IP,%s': 로컬 시작 IP, '%v' 는 로컬 마지막  IP, '%v'  보다 적어야 합니다. 
#From:up.tz.36,(GMT+02:00) Jerusalem 
up.tz.36,(GMT+02:00) Jerusalem 
#From:hhac.edit,Click the <strong>Edit</strong> icon to modify an existing rule using the Policy Wizard. 
hhac.edit,<strong>수정</strong> 아이콘을 눌러 정책 마법사를 사용하여 현재 있는 규칙을 수정할 수 있습니다. 
#From:GW_INET_ACCESS_INITIAL_FAIL,Internet access control initialization failed 
GW_INET_ACCESS_INITIAL_FAIL,인터넷 접속 제어 초기화에 실패하였습니다. 
#From:.hostname,Host Name 
.hostname,호스트 이름
#From:GW_WEB_FILTER_INITIAL_FAIL,Web filter initialization failed 
GW_WEB_FILTER_INITIAL_FAIL,웹 필터 초기화에 실패하였습니다. 
#From:GW_DHCP_SERVER_POOL_FROM_TO_ORIENTATION_INVALID,Pool IP address FROM must not be bigger than TO. 
GW_DHCP_SERVER_POOL_FROM_TO_ORIENTATION_INVALID,IP 풀 주소는 FROM 이 TO 보다 항상 낮아야 합니다. 
#From:bws.CT.1,TKIP 
bws.CT.1,TKIP 
#From:te.OnSch,On Schedule 
te.OnSch,스케쥴에 맞게 
#From:help513,Email 
help513,이메일
#From:wwl.title.s4,Step 3: Set your Wireless Security Password 
wwl.title.s4,Step 3: 무선 보안 비밀번호를 설정하십시오. 
#From:help281,Reconnect Mode: 
help281,Reconnect Mode: 
#From:GW_XML_CONFIG_SET_LOCK,Configuration database lock failed #%u 
GW_XML_CONFIG_SET_LOCK,설정 데이터베이스 잠금에 실패하였습니다. #%u
#From:help690,Session Initiation Protocol. A standard protocol for initiating a user session that involves multimedia content, such as voice or chat. 
help690,Session Initiation Protocol. A standard protocol for initiating a user session that involves multimedia content, such as voice or chat. 
#From:gw.gm.77,Gamespy Tunnel 
gw.gm.77,Gamespy Tunnel 
#From:.clonemac,Clone Your PC's MAC Address 
.clonemac,PC MAC 주소 복사
#From:hhss.intro,This is a summary of the number of packets that have passed between the WAN and the LAN since the router was last initialized. 
hhss.intro,공유기가 초기화되어 WAN과 LAN 사이를 통과하는 패킷 번호를 정리한 것입니다. 
#From:at.MUS,Measured Uplink Speed 
at.MUS,업링크 속도 
#From:help892,Enable this option only if you have purchased your own domain name and registered with a dynamic DNS service provider. The following parameters are displayed when the option is enabled. 
help892,Enable this option only if you have purchased your own domain name and registered with a dynamic DNS service provider. The following parameters are displayed when the option is enabled. 
#From:hhan.wans,The WAN speed is usually detected automatically. If you are having problems connecting to the WAN, try selecting the speed manually. 
hhan.wans,일반적으로 WAN 속도는 자동으로 감지됩니다. WAN 연결에 문제가 있는 경우, 직접 속도를 선택할 수도 있습니다. 
#From:help607,Mbps 
help607,Mbps 
#From:GW_DHCP_SERVER_RESERVED_IP_UNIQUENESS_INVALID,Reserved IP %v conflicts with another reservation 
GW_DHCP_SERVER_RESERVED_IP_UNIQUENESS_INVALID,보유 IP 주소 %v 가 다른 IP 주소와 충돌합니다. 
#From:help382,The key is entered as a pass-phrase of up to 63 alphanumeric characters in ASCII (American Standard Code for Information Interchange) format at both ends of the wireless connection. It cannot be shorter than eight characters, although for proper security it needs to be of ample length and should not be a commonly known phrase. This phrase is used to generate session keys that are unique for each wireless client. 
help382,The key is entered as a pass-phrase of up to 63 alphanumeric characters in ASCII (American Standard Code for Information Interchange) format at both ends of the wireless connection. It cannot be shorter than eight characters, although for proper security it needs to be of ample length and should not be a commonly known phrase. This phrase is used to generate session keys that are unique for each wireless client. 
#From:tsc.hrmin,(hour:minute, 12 hour time) 
tsc.hrmin,(hour:minute, 12 hour time) 
#From:help82,This is the uplink speed measured when the WAN interface was last re-established. The value may be lower than that reported by your ISP as it does not include all of the network protocol overheads associated with your ISP's network. Typically, this figure will be between 87% and 91% of the stated uplink speed for xDSL connections and around 5 kbps lower for cable network connections. 
help82,This is the uplink speed measured when the WAN interface was last re-established. The value may be lower than that reported by your ISP as it does not include all of the network protocol overheads associated with your ISP's network. Typically, this figure will be between 87% and 91% of the stated uplink speed for xDSL connections and around 5 kbps lower for cable network connections. 
#From:help525,Programming that is inserted into a hardware device that tells it how to function 
help525,Programming that is inserted into a hardware device that tells it how to function 
#From:gw.gm.24,Heretic II 
gw.gm.24,Heretic II 
#From:gw.gm.13,Delta Force 
gw.gm.13,Delta Force 
#From:wepkey2,WEP Key 2 
wepkey2,WEP Key 2 
#From:LW28,Manual Internet Connection Options 
LW28,수동 인터넷 연결 옵션 
#From:help754,A company that provides a broadband Internet connection over a wireless connection 
help754,A company that provides a broadband Internet connection over a wireless connection 
#From:aw.RT,RTS Threshold 
aw.RT,RTS 값 
#From:.wepkey1,WEP Key 1 
.wepkey1,WEP Key 1 
#From:KR83,Turn this setting off to configure manually. 
KR83,직접 설정하기 위해 이 설정을 정지합니다. 
#From:help340,Windows XP 
help340,윈도우 XP
#From:sd.WLAN,Wireless LAN 
sd.WLAN,무선 LAN
#From:help30,Requests may be redirected to the "Forbidden" page if web access for the LAN machine is restricted by an Access Control Rule. Add the WAN-side identity (WAN-side IP-address of the router or its dynamic DNS name) on the <a href="../Advanced/Web_Filter.shtml"> Advanced&nbsp;&rarr;&nbsp;Web&nbsp;Filter</a> screen to work around this problem. 
help30,Requests may be redirected to the "Forbidden" page if web access for the LAN machine is restricted by an Access Control Rule. Add the WAN-side identity (WAN-side IP-address of the router or its dynamic DNS name) on the <a href="../Advanced/Web_Filter.shtml"> Advanced&rarr;WebFilter</a> screen to work around this problem. 
#From:help864,If your SMTP server requires authentication, select this option. 
help864,If your SMTP server requires authentication, select this option. 
#From:help617,MPPE 
help617,MPPE 
#From:GW_SYSLOG_ADDRESS_INVALID,Syslog server IP address is invalid. 
GW_SYSLOG_ADDRESS_INVALID,시스템 로그 서버 IP 주소가 잘못되었습니다. 
#From:YM105,Invalid PPTP IP address 
YM105,PPTP IP 주소가 잘못되었습니다. 
#From:help500,A name that is associated with an IP address 
help500,A name that is associated with an IP address 
#From:ZM5,DHCP Client 
ZM5,DHCP 클라이언트
#From:wprn.bados,Unsupported Operating System 
wprn.bados,지원되지 않는 운영체제(OS) 입니다. 
#From:help212,WCN ActiveX Control 
help212,WCN ActiveX Control 
#From:.metric,Metric 
.metric,메트릭
#From:help19x2,To specify any other protocol, select "Other" from the list, then enter the corresponding protocol number (<a href="http://www.iana.org/assignments/protocol-numbers" target="_blank"> as assigned by the IANA</a>) in the <span class="option">Protocol</span> box. 
help19x2,To specify any other protocol, select "Other" from the list, then enter the corresponding protocol number (<a href="http://www.iana.org/assignments/protocol-numbers" target="_blank"> as assigned by the IANA</a>) in the <span class="option">Protocol</span> box. 
#From:INBOUND_FILTER,Inbound Filter 
INBOUND_FILTER,수신 필터 
#From:IPNAT_UDP_BLOCKED_INGRESS,Blocked incoming UDP packet from %v:%u to %v:%u 
IPNAT_UDP_BLOCKED_INGRESS,%v:%u 에서 %v:%u 로의 수신 UDP 패킷이 차단되었습니다. 
#From:KR36,Step 2: Connect your Wireless Device 
KR36,Step 2: 무선 장비를 연결하십시오. 
#From:help351,This option turns off and on the wireless connection feature of the router. When you set this option, the following parameters are in effect. 
help351,This option turns off and on the wireless connection feature of the router. When you set this option, the following parameters are in effect. 
#From:GW_ROUTES_METRIC_INVALID,Route metric %u is invalid, must be from 1 to 16 
GW_ROUTES_METRIC_INVALID,루트 메트릭 %u 가 잘못되었습니다. 메트릭 값은 1 ~ 16 입니다. 
#From:wwz.manual.key2,Use this options if you prefer to create our own key. 
wwz.manual.key2,키를 직접 생성하고 싶으시면 이 옵션을 사용하십시오. 
#From:.PPTPsubnet,PPTP Subnet Mask 
.PPTPsubnet,PPTP 서브넷 마스크
#From:help20,The port that will be used on your internal network. 
help20,The port that will be used on your internal network. 
#From:help558,Internet Control Message Protocol 
help558,Internet Control Message Protocol 
#From:gw.gm.6,Black and White 
gw.gm.6,Black and White 
#From:help429,APIPA. An IP address that that a Windows computer will assign itself when it is configured to obtain an IP address automatically but no DHCP server is available on the network 
help429,APIPA. An IP address that that a Windows computer will assign itself when it is configured to obtain an IP address automatically but no DHCP server is available on the network 
#From:GW_WLAN_SSID_INVALID,The SSID field can not be blank. 
GW_WLAN_SSID_INVALID,SSID 항목은 반드시 입력하십시오. 
#From:LS46,Invalid IP Address 
LS46,IP 주소가 잘못되었습니다. 
#From:YM179,The timeout value cannot be less than or equal to zero. 
YM179,타임아웃 값이 0 이 될 수 없습니다. 
#From:help511,EAP 
help511,EAP 
#From:bws.WPAM,WPA Mode 
bws.WPAM,WPA Mode 
#From:KR78,The IP address of the <span>rou</span><span>ter</span> on the local area network. 
KR78,로컬 네트워크 <span>rou</span><span>ter</span> 의 IP 주소 
#From:bln.alert.2,Invalid LAN IP Address 
bln.alert.2,LAN IP 주소가 잘못되었습니다. 
#From:wwl.GOOD,GOOD 
wwl.GOOD,GOOD 
#From:.aa.bsecure.magazine,Magazine 
.aa.bsecure.magazine,잡지
#From:KR101,The device may be too busy to properly receive it right now. Please try to save the settings again. 
KR101,장비의 현재 처리량이 너무 많아서 수신한 명령을 처리하지 못할 수도 있습니다. 설정을 다시 저장해 주시기 바랍니다.  
#From:help894,Enter your host name, fully qualified; for example: <code>myhost.mydomain.net</code>. 
help894,Enter your host name, fully qualified; for example: <code>myhost.mydomain.net</code>. 
#From:gw.gm.36,Postal 2: Share the Pain 
gw.gm.36,Postal 2: Share the Pain 
#From:GW_WLAN_WPA_WPA_AES_INVALID,WPA only mode doesn't support AES. 
GW_WLAN_WPA_WPA_AES_INVALID,WPA only mode는 AES를 지원하지 않습니다. 
#From:GW_NAT_INBOUND_FILTER,Inbound Filter 
GW_NAT_INBOUND_FILTER,수신 필터
#From:help534,Gbps 
help534,Gbps 
#From:hhwf.xref,Use with <a href="../Advanced/Access_Control.shtml" onclick="return jump_if();">Advanced &rarr; Access&nbsp;Control</a>. 
hhwf.xref,<a href="../Advanced/Access_Control.shtml" onclick="return jump_if();">Advanced &rarr; AccessControl</a>를 사용하십시오. 
#From:GW_REMOTE_ADMINSTRATION,Gateway remote administration enabled on port: %u 
GW_REMOTE_ADMINSTRATION,게이트웨이 원격 관리를 포트 : %u 에 활성화하였습니다. 
#From:.subnet,Subnet Mask 
.subnet,서브넷 마스크
#From:GW_INET_ACL_POLICY_NAME_INVALID,The Policy Name cannot be blank. 
GW_INET_ACL_POLICY_NAME_INVALID,정책 명을 비워두지 마십시오. 
#From:wps.KR35,Step 1: Select Configuration Method for your Wireless Network 
wps.KR35,Step 1: 무선 네트워크 설정 방법 선택
#From:help329.rsv,The <code>Reserve</code> option converts this dynamic IP allocation into a DHCP Reservation and adds the corresponding entry to the DHCP Reservations List. 
help329.rsv,The <code>Reserve</code> option converts this dynamic IP allocation into a DHCP Reservation and adds the corresponding entry to the DHCP Reservations List. 
#From:gw.gm.58,Vietcong 
gw.gm.58,Vietcong 
#From:sa.Internet,Internet 
sa.Internet,인터넷
#From:help496,"Demilitarized Zone". A computer that logically sits in a "no-mans land" between the LAN and the WAN. The DMZ computer trades some of the protection of the router's security mechanisms for the convenience of being directly addressable from the Internet. 
help496,"Demilitarized Zone". A computer that logically sits in a "no-mans land" between the LAN and the WAN. The DMZ computer trades some of the protection of the router's security mechanisms for the convenience of being directly addressable from the Internet. 
#From:help446,Bottleneck 
help446,Bottleneck 
#From:GW_WLAN_11A_DFS_CHANNEL_INVALID,Per regulatory request, channel 52 - 140 can not be used without enable radar detection. 
GW_WLAN_11A_DFS_CHANNEL_INVALID,규제에 따라,  무선 감지(radar detection) 설정 없이는 52 - 140 채널을 사용할 수 없습니다. 
#From:help739,Allows you to power up a computer though it's Network Interface Card 
help739,Allows you to power up a computer though it's Network Interface Card 
#From:YM153,The rule applies to a flow of messages for which host 1's port number is within the range set here. 
YM153,호스트 1의 포트 메시지의 흐름에 적용하는 규칙은 여기에서 설정한 범위안에 있습니다. 
#From:GW_WAN_MODE_IS,Bringing up WAN using %s 
GW_WAN_MODE_IS,%s 를 사용하여 WAN 표시 
#From:help627,Determines what portion of an IP address designates the Network and which part designates the Host 
help627,Determines what portion of an IP address designates the Network and which part designates the Host 
#From:at.ReIPR,Remote IP Range 
at.ReIPR,원격지 IP 범위
#From:ns.intro.,Use this section to configure the internal network settings of your router and also to configure the built-in DHCP Server to assign IP addresses to the computers on your network. The IP Address that is configured here is the IP Address that you use to access the Web-based management interface. If you change the IP Address here, you may need to adjust your PC's network settings to access the network again. 
ns.intro.,공유기 내부 네트워크 설정이나 DHCP 서버를 설정하여 PC에 IP를 할당할 수 있습니다. 여기에서 설정한 IP 주소는 웹관리 인터페이스에 접속하는데 사용되는 그 IP 주소입니다. 여기에서 IP 주소 변경 후, 네트워크에 다시 접속하려면 PC의 네트워크 설정을 다시 해야 합니다.
#From:wwl.s4.intro,You have selected your security level - you will need to set a wireless security password. 
wwl.s4.intro,보안 단계를 선택하십시오. - 무선 보안 비밀번호 설정이 필요합니다. 
#From:LW15,Only "Admin" account can change security settings. 
LW15,"관리자" 계정으로만 보안 설정을 변경할 수 있습니다.  
#From:GW_WLAN_DTIM_INVALID,DTIM should be between 1 and 255. 
GW_WLAN_DTIM_INVALID,DTIM 값은 1 ~ 255 입니다. 
#From:sd.SecTyp,Security Mode 
sd.SecTyp,보안 모드
#From:IPDNSRELAYALG_REJECTED_PACKET,DNS relay ALG rejected packet from %v:%u to %v:%u 
IPDNSRELAYALG_REJECTED_PACKET,DNS 릴레이 ALG가 %v:%u 에서 %v:%u 로의 패킷을 거부하였습니다. 
#From:ss.intro,Traffic Statistics display Receive and Transmit packets passing through your router. 
ss.intro,공유기를 통과하는 송/수신 트래픽 패킷의 상세 정보가 표시됩니다. 
#From:YM144,A WISH Rule identifies a specific message flow and assigns a priority to that flow. 
YM144,WISH 규칙은 상세 메시지 흐름을 확인하고 그 흐름의 우선 순위를 할당합니다. 
