


#From:S500,Select this option if you want to add a guest network
S500,如果您想增加一个客户网络，选择该项。
#From:S496,Network Type
S496,网络类型
#From:LV2,Enable HTTPS Server
LV2,启用HTTPS服务器。
#From:logs.LW39b.email,The Email Now button is disabled because Email Notification is not enabled on <a href="../Tools/EMail.shtml" onclick="return jump_if();" shape="rect">Tools &rarr; Email</a> screen.
logs.LW39b.email,Email通知未激活导致Email Now按钮无法使用<a href="../Tools/EMail.shtml" onclick="return jump_if();" shape="rect">Tools &rarr; Email</a> screen。
#From:LV3,Use HTTPS 
LV3,使用HTTPS
#From:GW_WIRELESS_DEVICE_LINK_UP,%s%sWireless system with MAC address %m secured and linked 
GW_WIRELESS_DEVICE_LINK_UP,MAC地址%s%s为%m无线系统已加密并连。
#From:LT248,All log entries were cleared. 
LT248,已清除所有日志条目。 
#From:GW_PPPOE_EVENT_DISCOVERY_ATTEMPT,Discovering PPPoE servers for %s PPPoE Session 
GW_PPPOE_EVENT_DISCOVERY_ATTEMPT,发现%s PPPoE会话的PPPoE服务器。
#From:GW_WLAN_RADIO_1_NAME,5GHz Band 
GW_WLAN_RADIO_1_NAME,5GHz频段
#From:te.SMTPSv.Port,SMTP Server Port 
te.SMTPSv.Port,SMTP服务器端口
#From:GW_WLAN_CHANGING_PHY_MODE_TO_11NG_ONLY_INVALID,Can not change 802.11 Mode to 802.11n only, while there is an SSID with WEP security. 
GW_WLAN_CHANGING_PHY_MODE_TO_11NG_ONLY_INVALID,当具有WEP安全的SSID时，不能只将802.11模式转换为802.11n。
#From:S558,Select your Wireless Network 
S558,选择您的无线网络。
#From:KRL8,Select the Radio you Want to Configure 
KRL8,选择您想配置的单选框。
#From:LY30,The selection helps you to define the Guest Zone scale. 
LY30,该选择帮助您界定客户区容量。
#From:GW_WEB_SERVER_PUBLIC_PORT_CAN_NOT_MATCH_HTTPS_ADMIN_PORT,Virtual server '%s' can not use the router's HTTPS WAN administration port, %u 
GW_WEB_SERVER_PUBLIC_PORT_CAN_NOT_MATCH_HTTPS_ADMIN_PORT,虚拟服务器‘%s’不能使用该路由器的 HTTPS WAN 管理端口，%u。
#From:GW_WIFISC_DISABLED_AUTOMATICALLY,Wi-Fi protected setup disabled because security of SSID '%s' is set to WPA-Enterprise. 
GW_WIFISC_DISABLED_AUTOMATICALLY,Wi-Fi保护设置无效，因为 SSID‘%s’的安全设置是用于设置 WPA-Enterprise的。
#From:GW_PPPOE_EVENT_OFFER,Offer received for %s PPPoE Session, service offered is %s from %s (%m) 
GW_PPPOE_EVENT_OFFER,为%s PPPoE会话接收到的数据，所提供的服务是从%s到%s(%m)。
#From:GW_WLAN_RADIO_0_NAME,2.4GHz Band 
GW_WLAN_RADIO_0_NAME,2.4GHz频段
#From:GW_PPPOE_EVENT_DISCOVERY_REQUEST_ERROR,%s PPPoE session protocol fault. Connection attempt failed. 
GW_PPPOE_EVENT_DISCOVERY_REQUEST_ERROR,%s PPPoE会话协议故障。尝试连接失败。
#From:GW_WAN_PPPOE_SESSION_NAME_CONFLICT,PPPoE session name %s conflicts with other session name 
GW_WAN_PPPOE_SESSION_NAME_CONFLICT,PPPoE会话名称%s与其他会话名称有冲突。
#From:S525,Problem in receiving logs! Memory is too low to display logs or there is a problem with the connection. 
S525,接收日志出错！内存太低以致不能显示日志或连接有误。
#From:S493,Password can only contain printable characters. 
S493,密码只包含可打印字符。
#From:KR136,You should examine these warnings, because some features may have been disabled or modified. 
KR136,请检查这些警告，有些特性可能已失效或被修改。
#From:GW_PPPOE_EVENT_DISCONNECT,Terminating %s PPPoE session ID %u 
GW_PPPOE_EVENT_DISCONNECT,终止%s PPPoE会话ID %u
#From:anet.multicast.enhanced,Enhanced IGMP Proxy 
anet.multicast.enhanced,增强的IGMP代理
#From:LY34,Use this section to enable routing between Host Zone and Guest Zone, Guest clients can not access Host clients' data without enable the function. 
LY34,使用该项启用主机区和客户区的路由，如不启用该功能，客户机程序不能访问主机客户端程序的数据。
#From:GW_WIRELESS_SHUT_DOWN,%sWireless shut down 
GW_WIRELESS_SHUT_DOWN,%s无线关闭
#From:GW_WIRELESS_RESTART,%sWireless restart 
GW_WIRELESS_RESTART,%s无线重启
#From:S528,The administration idle time should be in the range of 1 to 65535. 
S528,管理空闲时间应在1到65535之间。
#From:GW_PORT_FORWARD_TCP_PACKET_ALLOC_FAILURE,Port forwarding ALG failed to allocate session for TCP packet from %v:%u to %v:%u 
GW_PORT_FORWARD_TCP_PACKET_ALLOC_FAILURE,端口转发ALG不能为从%v:%u到%v:%u的TCP数据包分配会话。
#From:guestzone.Intro.1,Use this section to configure the guest zone settings of your router. The guest zone provide a separate network zone for guest to access Internet. 
guestzone.Intro.1,使用该项配置您的路由器客户区设置。客户区为访问Internet的客户提供了单独的网络区。
#From:GW_NAT_VIRTUAL_SERVER_PUBLIC_PORT_CAN_NOT_MATCH_HTTPS_ADMIN_PORT,Virtual server '%s' can not use the router's HTTPS WAN administration port, %u 
GW_NAT_VIRTUAL_SERVER_PUBLIC_PORT_CAN_NOT_MATCH_HTTPS_ADMIN_PORT,虚拟服务器‘%s’不能使用路由器的HTTPS WAN管理端口,%u。
#From:S473,Enable Routing Between Zones 
S473,在区之间启用路由。
#From:te.SMTPSv.Port.alert,Port should be in range (1..65535) 
te.SMTPSv.Port.alert,端口应在(1..65535)范围内。
#From:GW_WIRELESS_DEVICE_START_FAILED,%sFailed to start wireless 
GW_WIRELESS_DEVICE_START_FAILED,%s启动无线失败。
#From:GW_PORT_FORWARD_UDP_PACKET_ALLOC_FAILURE,Port forwarding ALG failed to allocate session for UDP packet from %v:%u to %v:%u 
GW_PORT_FORWARD_UDP_PACKET_ALLOC_FAILURE,端口转发ALG不能为从%v:%u到%v:%u的UDP数据包分配会话。
#From:GW_WIRELESS_DEVICE_DISCONNECT_ALL,%sDisconnect all stations 
GW_WIRELESS_DEVICE_DISCONNECT_ALL,%s与所有工作站断开连接。
#From:GW_PPPOE_EVENT_OFFER_REQUEST,Issuing request for offer for %s PPPoE Session 
GW_PPPOE_EVENT_OFFER_REQUEST,为获得%s PPPoE会话数据发送请求。
#From:GW_ROUTES_ROUTERS_IP_ADDRESS_INVALID,Router IP %v must be a valid host address 
GW_ROUTES_ROUTERS_IP_ADDRESS_INVALID,路由器IP %v必须为有效主机地址。
#From:GW_PORT_TRIGGER_UDP_PACKET_ALLOC_FAILURE,Port trigger ALG failed to allocate session for UDP packet from %v:%u to %v:%u 
GW_PORT_TRIGGER_UDP_PACKET_ALLOC_FAILURE,触发器端口ALG为从%v:%u到%v:%u的UDP数据包分配会话。
#From:GW_WLAN_SETTING_SSID_SECURITY_TO_WEP_INVALID,Can not set WEP security for an SSID, while 802.11 Mode is 802.11n only. 
GW_WLAN_SETTING_SSID_SECURITY_TO_WEP_INVALID,当802.11模式仅为802.11n时，不能为SSID设置WEP安全。
#From:GW_WEB_SERVER_PUBLIC_PORT_CAN_NOT_MATCH_HTTP_ADMIN_PORT,Virtual server '%s' can not use the router's HTTP WAN administration port, %u 
GW_WEB_SERVER_PUBLIC_PORT_CAN_NOT_MATCH_HTTP_ADMIN_PORT,虚拟服务器‘%s’不能使用该路由器的HTTP WAN管理端口，%u。
#From:GW_WLAN_STATION_TIMEOUT,Timeout, station left 
GW_WLAN_STATION_TIMEOUT,超时，断开工作站。
#From:GW_NAT_VIRTUAL_SERVER_IP_ADDRESS_CAN_NOT_MATCH_ROUTER,Virtual server '%s' can not use the router's IP address, %v. 
GW_NAT_VIRTUAL_SERVER_IP_ADDRESS_CAN_NOT_MATCH_ROUTER,虚拟服务器‘%s’不能使用路由器的IP地址，%v。
#From:GW_NAT_VIRTUAL_SERVER_PROTO_CONFLICT_INVALID,'%s' [protocol:%u]->%v conflicts with '%s' [protocol:%u]->%v. 
GW_NAT_VIRTUAL_SERVER_PROTO_CONFLICT_INVALID,‘%s’[protocol:%u]->%v与‘%s’[protocol:%u]->%v有冲突。
#From:LY28,Specifies whether the Guest Zone will be enabled or disabled. 
LY28,定义，无论客户区启用或禁用。
#From:GW_PPPOE_EVENT_CONNECT,Trying to establish %s PPPoE connection 
GW_PPPOE_EVENT_CONNECT,试图建立%s PPPoE连接。
#From:GW_NAT_TRIGGER_PORT,Trigger Ports 
GW_NAT_TRIGGER_PORT,触发器端口
#From:KR971,Operating frequency band. Choose 2.4GHz for visibility to legacy devices and for longer range. Choose 5GHz for least interference; interference can hurt performance. 
KR971,工作频段。选择240Hz兼容传统设备并达到更远传输距离。选择50Hz达到低干扰；干扰会降低性能。
#From:wwz.auto.assign.key3,Automatically assign a network key for both 2.4GHz and 5GHz band (Recommended) 
wwz.auto.assign.key3,自动为2.4GHz和5GHz频段分配一个网络密钥（推荐）。
#From:LY292,Provide a name for Guest Zone wireless network.
LY292,为客户区无线网络提供一个名称。
#From:LY293,Securing your wireless network is important as it is used to protect the integrity of the information being transmitted over your wireless network. The router is capable of 4 types of wireless security; WEP, WPA only, WPA2 only, and WPA/WPA2 (auto-detect).
LY293,确保您的无线网络安全十分重要，它用于保护无线网络上传输信息的完整性。路由器可用于四种无线安全，即WEP, 仅WPA, 仅WPA2和 WPA/WPA2 (自动检测)。
#From:bws.msg.WEP.4,If you choose the WEP security option this device                                         will <strong>ONLY</strong> operate in <strong>Legacy Wireless mode (802.11B/G)</strong>.                                         This means you will <strong>NOT</strong> get 11N performance due to the fact that WEP                                         is not supported by the Draft 11N specification.
bws.msg.WEP.4,如果您选择WEP安全选项，该设备将<strong>只工作在<strong>传统无线模式下(802.11B/G)</strong>。由于WEP不被11N草案规格所支持，这意味着您将<strong>不能<strong>获得11N性能。
#From:GW_ROUTES_ON_LINK_DATALINK_CHECK_INVALID,The route for %v on interface %s may not be created - only routes via gateways may be created on this interface 
GW_ROUTES_ON_LINK_DATALINK_CHECK_INVALID,在%v端口上无法为%s建立路由 — 该端口上只能建立通过网关的路由。
#From:wwa.dnsset,DNS settings
wwa.dnsset,DNS 设置
#From:wireless.gu,This wizard is designed to assist you in connecting your guest wireless device to your wireless router. It will guide you through step-by-step instructions on how to get your guest wireless device connected. Click the button below to begin.
wireless.gu,该向导用于帮助您将客户无线装置连接到您的无线路由器。它将分步骤指导您如何将连接客户无线装置。点击以下按钮开始。
#From:add.gu.wps,Add Guest Wireless with WPS
add.gu.wps,用WPS增加无线客户。
#From:wwl.band,Wireless Band
wwl.band,无线频段
#From:.band,Band
.band,频段
#From:wwa.5G.nname,Manually set 5GHz band Network Name
wwa.5G.nname,手动设置5GHz频段网络名称。
#From:.guestzone,GUEST ZONE
.guestzone,客户区
#From:guestzone.title.1,Guest Zone Selection
guestzone.title.1,客户区选择
#From:guestzone.enable,Enable Guest Zone
guestzone.enable,启用客户区
#From:guestzone.inclw,Include Wireless
guestzone.inclw,包括无线
#From:guest,Guest
guest,客户
#From:lower.wnt,lower than wireless network
lower.wnt,低于无线网络
#From:equal.wnt,equal to wireless network
equal.wnt,等于无线网络
#From:.lowest,lowest
.lowest,最低
#From:ssid.lst,SSID List
ssid.lst,SSID 目录
#From:dlink.help150,Guest clients can reach to the internet along guest SSIDs
dlink.help150,客户端程序可以通过客户SSIDs连接到internet。
#From:mult.ssid,Multiple SSID
mult.ssid,多个SSID
#From:dlink.help155,You may assign more than one SSID to each radio card.
dlink.help155,您可以为每个无线网卡分配多个SSID。
#From:add.ed.ssid,Add/Edit SSID
add.ed.ssid,增加/编辑SSID
#From:dlink.help156,Enable or disable this SSID. When enabled, the following parameters are in effect.
dlink.help156,启用或禁用SSID。启用时，以下参数有效。
#From:dlink.help157,This is the network to which the SSID belongs; SSID clients that belong to the same network can transmit data over this subnet.
dlink.help157,这是SSID所属的网络；属于相同网络的SSID用户能在该子网上传输数据。
#From:wpin.filter,WAN Ping Inbound Filter
wpin.filter,WAN ping入站过滤器
#From:dlink.help151,Select a filter that controls which WAN computers can use the ping feature. If you do not see the filter you need in the list of filters, go to the  Advanced → Inbound Filter screen and create a new filter.
dlink.help151,选择一个过滤器来控制WAN上的计算机是否能使用ping特性。如果不能在过滤器列表中查看到该过滤器，选择高级→ 入站分离器界面，创建新的过滤器。



#From:tps.raw1,The raw TCP port printing protocol uses a fixed IP address and TCP port to communicate with your printer. 
tps.raw1,原始数据TCP端口打印协议采用固定IP地址和TCP端口与您的打印机进行通信。
#From:up.tz.52,(GMT+06:30) Rangoon 
up.tz.52,(GMT+06:30) 仰光
#From:.r.alert.new1,Destination IP address are same 
.r.alert.new1,目的IP地址相同
#From:te.EmSt,Email Settings 
te.EmSt,Email设置
#From:tt.Nov,Nov 
tt.Nov,十一月
#From:IPNAT_BLOCKED_EGRESS,Blocked outgoing packet from %v to %v (IP protocol %u) 
IPNAT_BLOCKED_EGRESS,被阻塞的外传数据包从%v到%v (IP协议%u)
#From:bws.WSMode,Wireless Security Mode 
bws.WSMode,无线安全模式
#From:tsc.pingt.msg102,Pings lost: 
tsc.pingt.msg102,Ping丢失
#From:help65,Give the rule a name that is meaningful to you, for example <code>Game Server</code>. You can also select from a list of popular games, and many of the remaining configuration values will be filled in accordingly. However, you should check whether the port values have changed since this list was created, and you must fill in the IP address field. 
help65,为规则命名很有必要，例如，<code>游戏服务器</code>。您也可以从一个大众游戏列表中选择，这样多数设置数值已经填写完毕。然而，您需要检查端口数值是否在列表创建后被更改过，并且需要填写IP地址栏。
#From:ta.upnp,UPnP 
ta.upnp,UPnP
#From:bwl.TxR,Transmission Rate 
bwl.TxR,传输速率
#From:GW_WAN_RATE_ESTIMATOR_RATE_COMPLETED,WAN interface speed measurement completed 
GW_WAN_RATE_ESTIMATOR_RATE_COMPLETED,WAN端口速度测量完毕
#From:tsc.pingt.msg106,Average ping time (in milliseconds): 
tsc.pingt.msg106,平均ping时间(单位为毫秒)：
#From:tsc.AllDay,All Day 
tsc.AllDay,全天
#From:gw.gm.53,Tiger Woods 2K4 
gw.gm.53,泰格 伍兹 2004
#From:GW_WAN_RATE_ESTIMATOR_RESOURCE_ERROR,WAN interface speed measurements not started as low on resources 
GW_WAN_RATE_ESTIMATOR_RESOURCE_ERROR,因为资源不足，WAN端口速度测量未能启动
#From:DHCP_CLIENT_LOST_LEASE,Lost lease on IP Address 
DHCP_CLIENT_LOST_LEASE,IP地址租借丢失
#From:.aa.wiz.s3.msg,Choose a schedule to apply to this policy. 
.aa.wiz.s3.msg,选择一个排程用于应用该策略。
#From:help385,Authentication Timeout: 
help385,验证超时：
#From:hhtt.intro,Good timekeeping is important for accurate logs and scheduled firewall rules. 
hhtt.intro,走时精确对正确的日志和排程防火墙规则很重要。
#From:gw.gm.20,Final Fantasy XI (PC) 
gw.gm.20,最终幻想XI（PC）
#From:help388,The IP address of the authentication server. 
help388,验证服务器的IP地址。
#From:tt.StDT,Set the Date and Time Manually 
tt.StDT,手动设置时间和日期
#From:.ok,OK 
.ok,OK
#From:.status,Status 
.status,状态
#From:.Out,Out 
.Out,退出
#From:sl.WtV,What to View 
sl.WtV,如何查看
#From:WIFISC_AP_PROXY_PROCESS_START,STA with MAC (%m) requested for WPS registration 
WIFISC_AP_PROXY_PROCESS_START,WPS注册需要带MAC的STA(%m)
#From:wprn.nopr2,The setup wizard was unable to communicate with the printer. 
wprn.nopr2,设置向导无法与打印机通信。
#From:help352,When you are browsing for available wireless networks, this is the name that will appear in the list (unless Visibility Status is set to Invisible, see below). This name is also referred to as the SSID. For security purposes, it is highly recommended to change from the pre-configured network name. 
help352,当您在浏览可用无线网络时，该名称会显示在列表中（除非可视状态设为不可视，见下文）。出于安全考虑，强烈建议您更改预设网络名。
#From:wwz.wwl.wnn,Network Name (SSID) 
wwz.wwl.wnn,网络名（SSID）
#From:.ipaddr,IP Address 
.ipaddr,IP地址
#From:GW_WLS_SCHEDULE_START,gw_wireless_schedule start 
GW_WLS_SCHEDULE_START,gw_无线_排程启动
#From:help820,The direction of initiation of the conversation: 
help820,会话初始化指南
#From:help326,If all the computers on the LAN successfully obtain their IP addresses from the router's DHCP server as expected, this option can remain disabled. However, if one of the computers on the LAN fails to obtain an IP address from the router's DHCP server, it may have an old DHCP client that incorrectly turns off the broadcast flag of DHCP packets. Enabling this option will cause the router to always broadcast its responses to all clients, thereby working around the problem, at the cost of increased broadcast traffic on the LAN. 
help326,如果局域网中所有的计算机都从路由器的DHCP服务器中成功获取各自的IP地址，则该选项可以保持禁用。但是，如果局域网中有一台计算机从路由器的DHCP服务器上获取IP地址失败，则需要有一个错误关闭DHCP数据包的广播标记旧的DHCP客户端。启用该选项会导致路由器始终向所有客户端广播其响应结果，由此带来的结果就是增加局域网上广播流量的消耗。
#From:up.tz.54,(GMT+07:00) Krasnoyarsk 
up.tz.54,(GMT+07:00)克拉斯诺亚尔斯克
#From:help773,Note: Some browsers have limitations that make it impossible to update the WAN status display when the status changes. Some browsers require that you refresh the display to obtain updated status. Some browsers report an error condition when trying to obtain WAN status. 
help773,注意：某些浏览器设有限制，在状态发生改变时无法升级WAN状态显示。某些浏览器需要您刷新显示，以获得升级状态。某些浏览器会在尝试获取WAN状态时报错。
#From:am.MACFILT,MAC Filtering Rules 
am.MACFILT,MAC过滤规则
#From:aa.alert.7.new1,are same Machine. 
aa.alert.7.new1,为相同设备。
#From:help302,Each networking device has it's own unique MAC address defined by the hardware manufacturer. Some ISP's may check your computer's MAC address. Some ISP's record the MAC address of the network adapter in the computer or router used to initially connect to their service. The ISP will then only grant Internet access to requests from a computer or router with this particular MAC address. This router has a different MAC address than the computer or router that initially connected to the ISP. 
help302,每个网络设备都有其自身唯一的、由硬件厂商给定的MAC地址。某些ISP会检查您计算机上的MAC地址，某些ISP会记录计算机上的网卡或路由器的MAC地址，用于初始连接服务。随后ISP会根据从计算机或路有器上获取的特殊MAC地址，进行互联网接入。该路由器拥有与初始连接到ISP的计算机或路由器不同的MAC地址。
#From:aa.intro,The Access Control option allows you to control access in and out of your network. Use this feature as Access Controls to only grant access to approved sites, limit web access based on time or dates, and/or block internet access for applications like P2P utilities or games. 
aa.intro,访问控制选项允许您控制在网络上进出的访问。运用该特性来进行访问控制，可以只允许对许可的站点进行访问，以及根据时间或日期限制网络访问，或是阻塞某些应用或游戏，如P2P等对互联网的访问。
#From:help348,This shows clients that you have specified to have reserved DHCP addresses. An entry can be changed by clicking the Edit icon, or deleted by clicking the Delete icon. When you click the Edit icon, the item is highlighted, and the "Edit DHCP Reservation" section is activated for editing. 
help348,此处显示您已经制定保留DHCP地址的客户端。点击Edit图标可以对一个条目进行修改，或是通过点击Delete图标删除该条目。当您点击Edit图标时，该条目会高亮显示，然后“编辑DHCP保留项”部分可以进行编辑。
#From:gw.gm.35,PainKiller 
gw.gm.35,止疼药
#From:sl.Infrml,Informational 
sl.Infrml,信息的
#From:.wireless,Wireless 
.wireless,无线
#From:bws.RIPA,RADIUS server IP Address 
bws.RIPA,RADIUS服务器IP地址
#From:KR58.ww,Enabling WLAN Partition prevents associated wireless clients from communicating with each other. 
KR58.ww,启用WLAN分区，阻止相关的无线客户端之间的相互通信。
#From:help83,If Automatic Uplink Speed is disabled, this option allows you to set the uplink speed manually. Uplink speed is the speed at which data can be transferred from the router to your ISP. This is determined by your ISP. ISPs often specify speed as a downlink/uplink pair; for example, 1.5Mbps/284kbps. For this example, you would enter "284". Alternatively you can test your uplink speed with a service such as <a href="http://www.dslreports.com">www.dslreports.com</a>. Note however that sites such as DSL Reports, because they do not consider as many network protocol overheads, will generally note speeds slightly lower than the Measured Uplink Speed or the ISP rated speed. 
help83,如果自动上行链接速度被禁用，该选项允许您手动设置上行链接速率。上行链接速率是指数据从您的路由器传送到您的ISP的速度。该速率取决于ISP。ISP通常制定一个下行/上行速率配对。如1.5Mbps/284kbps。在该例中，您需要输入“284”。然后您可以选择测试某个服务，如<a href="http://www.dslreports.com">www.dslreports.com</a>的上行速率。但是要注意，该站点的DSL报告，因为这些站点不会考虑加载多个网络协议，所以实际速率通常会比测量的上行速率或ISP给定的速率略低。
#From:hhase.intro,If the <strong>Measured Uplink Speed</strong> is known to be incorrect (that is, it produces suboptimal performance), disable <strong>Automatic Uplink Speed</strong> and enter the <strong>Manual Uplink Speed</strong>. Some experimentation and performance measurement may be required to converge on the optimal value. 
hhase.intro,如果已知<strong>Measured Uplink Speed</strong>不正确（即产生的未达到最佳标准的性能），禁用<strong>Automatic Uplink Speed</strong>，然后输入<strong>Manual Uplink Speed</strong>。某些试验和性能指标可能需要在最佳数值中采集。
#From:RUNTIME_CONFIG_MAGIC_NUM_ERROR,Error loading configuration from non-volatile memory (Magic number mis-match). Reset configuration to factory defaults 
RUNTIME_CONFIG_MAGIC_NUM_ERROR,从非易失性存储器加载配置错误（魔数不匹配）。将设置恢复至出厂默认设置。
#From:.Sat,Sat 
.Sat,星期六
#From:awf.title.WSFR,Website Filtering Rules 
awf.title.WSFR,站点过滤规则
#From:help18.a,You can select a computer from the list of DHCP clients in the "Computer Name" drop-down menu, or you can manually enter the IP address of the server computer. 
help18.a,您可以从“计算机名”下拉菜单的DHCP客户端列表中选择一台计算机，或是手动输入作为服务器的计算机的IP地址。
#From:dlink.wf.op.1,ALLOW computers access to ONLY these sites 
dlink.wf.op.1,只允许计算机访问这些站点。
#From:gw.gm.18,Far Cry 
gw.gm.18,Far Cry
#From:gw.gm.7,Call of Duty 
gw.gm.7,使命的召唤
#From:USB_LOG_STORAGE_TYPE,Found USB mass storage with subclass %u protocol %u 
USB_LOG_STORAGE_TYPE,发现USB海量存储设备，带子集%u protocol %u
#From:help346,Game Server 
help346,游戏服务器
#From:up.rb.5,This will cause all current settings to be lost. 
up.rb.5,这些会导致当前所有设置丢失。
#From:.WEP,WEP 
.WEP,WEP
#From:IPMSCHAP_AUTH_FAIL_AND_NO_RETRY,MSCHAP send authentication response (Failure and no Retry). 
IPMSCHAP_AUTH_FAIL_AND_NO_RETRY,MSCHAP发送验证相应（失败并且放弃重试）。
#From:gw.gm.82,SWAT 4 
gw.gm.82,SWAT4
#From:bw.sap,The supported authentication protocols are PAP and CHAP. 
bw.sap,支持的验证协议为PAP和CHAP。
#From:bwn.msg.SWM,Enter the static address information provided by your Internet Service Provider (ISP). 
bwn.msg.SWM,输入您的ISP（互联网服务供应商）提供的静态地址信息。
#From:li.alert.2,The network connection seems to be down. Press 'Ok' to try again. 
li.alert.2,网络链接似乎已经断开，按下“OK”重新尝试。
#From:help120,When Access Control is disabled, every device on the LAN has unrestricted access to the Internet. However, if you enable Access Control, Internet access is restricted for those devices that have an Access Control Policy configured for them. All other devices have unrestricted access to the Internet. 
help120,当禁用访问控制时，局域网上的每个设备都可以无限制访问互联网。然而，如果您启用了访问控制，就这些设备的互联网访问就要收到访问控制策略设置的限制。所有其他设备可以无限制访问互联网。
#From:IGMP_HOST_LOW_RESOURCES,IGMP host has rejected group %v due to low system resources 
IGMP_HOST_LOW_RESOURCES,由于系统资源过低，IGMP主机被%v组拒绝。
#From:wwl.s4.intro.z3,- Exactly 10 or 26 characters using 0-9 and A-F 
wwl.s4.intro.z3,准确输入10或26个字符，由数字0-9和字母A-F组成。
#From:help858,Enable this option if you have a syslog server currently running on the LAN and wish to send log messages to it. 
help858,如果当前在局域网上运行系统日志服务器，并且希望发送日志信息，则启用该选项。
#From:help339,Windows 2000 
help339,Windows 2000
#From:help857,Enable Logging to Syslog Server 
help857,在系统日志服务器上启用日志功能。
#From:help51,Enter the port range that you want to open up to Internet traffic (for example <code>6000-6200</code>). 
help51,输入需要开启互联网流量（如<code>6000-6200</code>）的端口范围。
#From:GW_WAN_LAN_ADDRESS_CONFLICT_PPP,THE ADDRESSING OF THE INTERNET SIDE LEARNT THRU PPPoE CONFLICTS WITH THE ADDRESSING SELECTED FOR THE LAN SIDE. INTERNET COMMUNICATIONS WILL BE DISABLED UNTIL YOU HAVE CHANGED THE LAN SIDE ADDRESSING TO RESOLVE THE PROBLEM 
GW_WAN_LAN_ADDRESS_CONFLICT_PPP,互联网端通过PPPoE进行的地址学习与局域网端的地址选择相冲突。互联网通信会被禁用，直至您更改了局域网端的地址以解决此问题。
#From:ss.Errors,Errors 
ss.Errors,错误
#From:help899,If a dynamic DNS update fails for any reason (for example, when incorrect parameters are entered), the router automatically disables the Dynamic DNS feature and records the failure in the log. 
help899,如果由于任何原因导致的动态DNS升级失败（如：输入错误的参数），路由器会自动禁用动态DNS功能，并将错误记录到日志。
#From:wps.p3.4,please enter the PIN from your wireless device and click the below 'Connect' Button 
wps.p3.4,请从您的无线设备中输入PIN值，然后点击下面的“连接”按钮。
#From:haf.dmz.40,The DMZ capability is just one of several means for allowing incoming requests that might appear unsolicited to the NAT. In general, the DMZ host should be used only if there are no other alternatives, because it is much more exposed to cyberattacks than any other system on the LAN. Thought should be given to using other configurations instead: a virtual server, a port forwarding rule, or a port trigger. Virtual servers open one port for incoming sessions bound for a specific application (and also allow port redirection and the use of ALGs ). Port forwarding is rather like a selective DMZ, where incoming traffic targeted at one or more ports is forwarded to a specific LAN host (thereby not exposing as many ports as a DMZ host). Port triggering is a special form of port forwarding, which is activated by outgoing traffic, and for which ports are only forwarded while the trigger is active. 
haf.dmz.40,DMZ功能只是多个允许进入的请求以不经过NAT的方式显示的功能之一。通常，DMZ主机仅在没有其他选择的情况下启用，因为DMZ会使主机比其他局域网上的系统更多地暴露在计算机攻击中，因此最好采用其他设置代替：虚拟服务器、端口转发规则、或是端口触发。虚拟服务器开启一个端口用于来自一个指定应用程序绑定的会话（同时也允许端口重新定向和ALG的应用）。端口转发更类似于可选的DMZ,即进入的流量定向在一个或多个端口，然后转发到指定的局域网主机（因此不会像DMZ主机那样暴露多个端口）。端口触发是端口转发的一种特殊应用，即由输出的流量激活，然后只在触发器激活端口时进行转发。
#From:hhts.edit,Click the <strong>Edit</strong> icon to change an existing schedule. 
hhts.edit,点击<strong>Edit</strong>图标更改现有排程。
#From:wwl.wnn,Wireless Network Name (SSID) 
wwl.wnn,无线网络名（SSID）
#From:WEB_FILTER_LOG_URL_ACCESSED_MAC,Web site %S accessed from %s 
WEB_FILTER_LOG_URL_ACCESSED_MAC,网络站点%S accessed from %s
#From:aw.WE,WMM Enable 
aw.WE,启用WMM
#From:help201a,Setup Help 
help201a,设置帮助
#From:.bsecure.activate.trial,Activate Your FREE 30 Day Trial Here 
.bsecure.activate.trial,在此处激活三十天试用期
#From:help896,Enter the password or key provided by your service provider. If the Dynamic DNS provider supplies only a key, enter that key in all three fields. 
help896,输入有服务供应商提供的密码或密钥，如果动态DNS供应商只提供一个密钥，则在所有字段中输入该密钥。
#From:help815,The communications protocol used for the conversation. 
help815,用于会话的通信协议。
#From:.netmask,Netmask 
.netmask,网络遮罩
#From:.please_wait,Please wait... 
.please_wait,请稍等……
#From:help12,Repeat these steps for each Virtual Server Rule you wish to add. After the list is complete, click <span class="button_ref">Save Settings</span> at the top of the page. 
help12,为需要添加的每个虚拟服务器规则重复这些步骤。在完成列表后，在页面的顶部点击<span class="button_ref">Save Settings</span>。
#From:am.intro.1,The MAC (Media Access Controller) Address filter option is used to control network access based on the MAC Address of the network adapter. A MAC address is a unique ID assigned by the manufacturer of the network adapter. This feature can be configured to ALLOW or DENY network/Internet access. 
am.intro.1,MAC（媒体访问控制器）地址过滤选项用于基于网络适配器的MAC地址来控制网络访问。一个MAC地址是有网络适配器的生产厂商给定的唯一的ID，基于该特性，可以选择允许或拒绝网络/互联网访问。
#From:IPPPPLCP_SET_LOCAL_AUTH,LCP sets local auth: %04x 
IPPPPLCP_SET_LOCAL_AUTH,LCP集本地验证：%04x
#From:gw.gm.11,Crimson Skies 
gw.gm.11,Crimson Skies
#From:.dontsavesettings,Don't Save Settings 
.dontsavesettings,不保存设置
#From:wwl.s4.intro.za1,The WPA (Wi-Fi Protected Access) key must meet one of following guildelines: 
wwl.s4.intro.za1,WPA（Wi-Fi保护访问）密钥必须符合以下行业标准之一：
#From:308,MTU default = 
308,MTU默认值＝
#From:dlink.help148,The section lists the current denied or allowed web sites. 
dlink.help148,该部分列出当前拒绝或允许的Web站点。
#From:aa.AT.1,MAC 
aa.AT.1,MAC
#From:IPL2TP_TUNNEL_ABORTING,L2TP local tunnel 0x%04X aborted 
IPL2TP_TUNNEL_ABORTING,L2TP本地信道0x%04X放弃
#From:help330,Add/Edit DHCP Reservation 
help330,添加/编辑DHCP保留
#From:dlink.1.bwl.schld,Scheduling for Wireless Settings 
dlink.1.bwl.schld,无线设置排程
#From:wwa.msg.l2tp,L2TP client. 
wwa.msg.l2tp,L2TP客户端。
#From:tt.time.5,4 am 
tt.time.5,4 am
#From:help6,Enter the IP Address of the machine on your LAN (for example: <code>192.168.0.50</code> 
help6,为局域网上的设备输入IP地址（如：<code>192.168.0.50</code>）
#From:.time,Time 
.time,时间
#From:at.xDSL,xDSL Or Other Frame Relay Network 
at.xDSL,xDSL或其他帧中继网络
#From:wprn.intro4,Step 2: Launch the setup executable on your computer 
wprn.intro4,步骤2：在您的计算机上启动设置。
#From:help296,Normally, this is set to "auto". If you have trouble connecting to the WAN, try the other settings. 
help296,通常，这些设置为“自动”。如果您无法连接到WAN，请尝试其他设置。
#From:.LAN,LAN 
.LAN,LAN
#From:gw.gm.60,Warcraft III 
gw.gm.60,魔兽争霸3
#From:.aa.wiz.s4.msg,Select the machine to which this policy applies. 
.aa.wiz.s4.msg,选择应用策略的设备。
#From:wwl.64bits,64 bits 
wwl.64bits,64位
#From:IPFAT_DISK_FULL,Disk is full 
IPFAT_DISK_FULL,磁盘已满。
#From:help341,Go to your Start menu, select Programs, select Accessories, and select Command Prompt. At the command prompt type <code>ipconfig /all</code> and hit Enter. The physical address displayed for the adapter connecting to the router is the MAC address. 
help341,点击“开始”按钮，进入“程序”，选择“附件”，然后选择“命令提示符”。在命令提示行界面中键入<code>ipconfig /all</code>，然后点击回车键。随后显示的连接到路由器的物理地址即是MAC地址。
#From:sps.intro3,Your D-Link Router includes an integrated print server that allows a printer to be shared between multiple computers on your network. This page displays status information about the print server and any attached printer. 
sps.intro3,您的D-Link路由器包括一个集成的打印服务器，可以使您网络上的多台计算机共享一个打印机。该页显示了打印服务器和任何附加打印机的状态信息。
#From:aa.sched.conf.2,Press 'Ok' to abandon these changes and display the Schedule page. 
aa.sched.conf.2,点击OK，放弃这些设置，然后显示排程页。
#From:IPL2TP_SESSION_CONNECTING,Trying to start L2TP local session 0x%04X 
IPL2TP_SESSION_CONNECTING,尝试启动L2TP本地会话0x%04X
#From:NET_RTC_SYNCHRONIZATION_FAILED,Time synchronization failed (status %d) 
NET_RTC_SYNCHRONIZATION_FAILED,时间同步失败（状态%d）
#From:tf.AutoCh,Automatically Check Online for Latest Firmware Version 
tf.AutoCh,最新固件版本自动在线检测。
#From:wprn.iderr2,The printer manufacturer and/or model could not be determined, possibly due to an invalid device ID reported by the printer. The wizard cannot continue without this information. 
wprn.iderr2,或许因为打印机报出无效设备ID，因此无法确认打印机的生产厂商和/或型号。由于缺乏该信息，向导无法继续。
#From:help319,These two IP values (<i>from</i> and <i>to</i>) define a range of IP addresses that the DHCP Server uses when assigning addresses to computers and devices on your Local Area Network. Any addresses that are outside of this range are not managed by the DHCP Server; these could, therefore, be used for manually configured devices or devices that cannot use DHCP to obtain network address details automatically. 
help319,这两个IP值（<i>from</i> and <i>to</i>）定义了一个IP地址范围，该地址范围由DHCP服务器用于为局域网上的计算机和设备分配地址。任何处于该范围之外的第不能被DHCP服务器管理。因此，需要手动配置设备，或是设备无法自动从网络中获取准确的地址。
#From:af.intro.2,<b>Note:</b> Putting a computer in the DMZ may expose that computer to a variety of security risks. Use of this option is only recommended as a last resort. 
af.intro.2,<b>Note:</b> 将一台计算机置于DMZ状态，可能会使其暴露在多种安全风险之中。建议尽量不要使用该设置。
#From:help800,Clicking this button refreshes the display of log entries. There may be new events since the last time you accessed the log. 
help800,点击该按钮，刷新日志条目。在您上次访问日志后，日志内容可能已经更新。
#From:sd.title.Dev_Info,Device Information 
sd.title.Dev_Info,设备信息。
#From:GW_INET_ACCESS_DROP_PORT_FILTER,Internet access port filter dropped packet from %v to %v (protocol %u) 
GW_INET_ACCESS_DROP_PORT_FILTER,互联网访问端口过滤器丢包从%v to %v (协议%u)
#From:.connow,Windows Connect Now 
.connow,Windows现在连接
#From:IPSIPALG_REJECTED_PACKET,SIP ALG rejected packet from %v:%u to %v:%u 
IPSIPALG_REJECTED_PACKET,SIP ALG拒绝数据包，从%v:%u to %v:%u
#From:IPNAT_TCP_UNABLE_TO_MODIFY_OPTIONS,Dropped TCP packet from %v:%u to %v:%u as unable to modify header options 
IPNAT_TCP_UNABLE_TO_MODIFY_OPTIONS,由于无法修改报头选项，丢失TCP数据包，从%v:%u到%v:%u。
#From:tt.SelNTPSrv,Select NTP Server 
tt.SelNTPSrv,选择NTP服务器
#From:help812,A noisy radio-frequency environment can cause a high error rate on the wireless LAN. 
help812,在有无线电波干扰的环境中，会导致无线局域网出错率的增高。
#From:.user,User 
.user,用户
#From:up.tz.59,(GMT+08:00) Taipei 
up.tz.59,(GMT+08:00)台北
#From:SPECIAL_APP,Special Applications 
SPECIAL_APP,特殊应用程序
#From:wwl.NONE,NONE 
wwl.NONE,无
#From:GW_WAN_SERVICES_STARTED,Starting WAN Services 
GW_WAN_SERVICES_STARTED,开启WAN服务
#From:fb.FbWbAc,Forbidden Web Access 
fb.FbWbAc,禁止Web访问
#From:help275,You have to open up the Web-based management interface and click the Connect button manually any time that you wish to connect to the Internet. 
help275,您必须开启基于Web的管理界面，然后在任何想要接入互联网的时候，手动点击连接按钮。
#From:wprn.nopr,No Printer Detected 
wprn.nopr,未检测到打印机
#From:tt.TimeZ,Time Zone 
tt.TimeZ,时区
#From:wprn.tt,Troubleshooting Tips 
wprn.tt,维修小窍门
#From:help841,Select your local time zone from pull down menu. 
help841,从下拉菜单中选择您的当地时间。
#From:aa.sched.new,Define a new schedule 
aa.sched.new,定义一个新的排程。
#From:tt.time.14,1 pm 
tt.time.14,1pm
#From:gw.vs.1,HTTP 
gw.vs.1,HTTP
#From:tsl.SLSt,SysLog Settings 
tsl.SLSt,系统日志设置
#From:IPH323ALG_REJECTED_PACKET,H.323 ALG rejected packet from %v:%u to %v:%u 
IPH323ALG_REJECTED_PACKET,H.323 ALG拒绝数据包，从%v:%u to %v:%u
#From:aa.wiz.s1.msg4,Step 4 - Select filtering method 
aa.wiz.s1.msg4,步骤4-选择过滤方法
#From:help336,Windows 98 
help336,Windows 98
#From:ta.sn,System Name 
ta.sn,系统名
#From:help780,Depending on whether you are currently logged in to BigPond, you can click either the <span class="button_ref">BigPond Login</span> to attempt to establish the WAN connection or the <span class="button_ref">BigPond Logout</span> to break the WAN connection. 
help780,根据您当前是否登入BigPond网，您可以点击<span class="button_ref">BigPond Login</span>，尝试建立WAN连接，或是点击<span class="button_ref">BigPond Logout</span>，断开WAN连接。
#From:.interface,Interface 
.interface,接口
#From:WEB_FILTER_LOG_URL_BLOCKED,Web site %S blocked for %v 
WEB_FILTER_LOG_URL_BLOCKED,Web站点%S blocked for %v
#From:vs.http.port,Remote Admin Port confict with Virtual Server Item 
vs.http.port,远程管理端口与虚拟服务器项冲突。
#From:haf.intro.1,The router provides a tight firewall by virtue of the way NAT works. Unless you configure the router to the contrary, the NAT does not respond to unsolicited incoming requests on any port, thereby making your LAN invisible to Internet cyberattackers. However, some network applications cannot run with a tight firewall. Those applications need to selectively open ports in the firewall to function correctly. The options on this page control several ways of opening the firewall to address the needs of specific types of applications. 
haf.intro.1,依据NAT的功能，路由器提供了一个强大的防火墙。除非您反向设置路由器的NAT功能，否则NAT不会响应来自任何端口上进入的请求。因此可以在局域网上隐藏您的计算机，不至受到来自互联网的计算机攻击。然而，某些网络应用长须无法运行在高设置的防火墙环境下，这些应用程序需要有选择地在防火墙中开启端口，以便正确运行。该页中的选项可控制多种方法，用以为指定的应用类型地址开启防火墙。
#From:up.tz.07,(GMT-06:00) Central America 
up.tz.07,(GMT-06:00)中美洲
#From:aw.intro,If you are not familiar with these Advanced Wireless settings, please read the help section before attempting to modify these settings. 
aw.intro,如果您不熟悉这些高级无线设置，请在尝试修改这些设置前参阅帮助部分。
#From:wwa.gw,Gateway Address 
wwa.gw,网关地址
#From:.sentinel.serv,Sentinel Services 
.sentinel.serv,岗哨服务
#From:wwa.msg.sipa,Choose this option if your Internet Setup Provider provided you with IP Address information that has to be manually configured. 
wwa.msg.sipa,如果您的互联网设置供应商为您提供的IP地址信息需要手动配置，请选择该选项。
#From:IPNAT_TCP_UNABLE_TO_HANDLE_HEADER,Dropped TCP packet from %v to %v as unable handle packet header 
IPNAT_TCP_UNABLE_TO_HANDLE_HEADER,由于无法控制报头，丢弃TCP包，从 %v to %v。
#From:hhav.ip,You can select a computer from the list of DHCP clients in the <strong>Computer Name</strong> drop down menu, or you can manually enter the IP address of the computer at which you would like to open the specified port. 
hhav.ip,您可以在<strong>计算机名</strong>下拉菜单的DHCP客户端列表中选择一台计算机，或者您可以手动输入需要开启指定端口的计算机的IP地址。
#From:haf.dmz.50,Few applications truly require the use of the DMZ host. Following are examples of when a DMZ host might be required: 
haf.dmz.50,少数应用程序确实需要使用DMZ主机，以下为可能需要DMZ主机的实例：
#From:GW_INET_ACCESS_POLICY_END_MAC,Policy %s stopped; Internet access for MAC address %m changed to: %s 
GW_INET_ACCESS_POLICY_END_MAC,策略%s停止；MAC地址%m的互联网访问更改为：%s
#From:tsc.intro.Sch,The Schedule configuration option is used to manage schedule rules for various firewall and parental control features. 
tsc.intro.Sch,排程配置选项用于管理不同防火墙和父母控制特性的排程规则。
#From:GW_WLAN_ACCESS_DENIED,Access denied to wireless system with MAC address %m 
GW_WLAN_ACCESS_DENIED,拒绝对MAC地址为%m的无线系统进行访问。
#From:262,Local Domain Name 
262,本地域名
#From:help79,This option is enabled by default so that your router will automatically determine which programs should have network priority. 
help79,默认启用该选项，因此您的路由器会自动选择程序的网络优先级。
#From:GW_BIGPOND_CONFIG,BigPond not configured properly 
GW_BIGPOND_CONFIG,没有正确配置BigPond
#From:aw.TP.0,High 
aw.TP.0,高
#From:.sdi.s3,Establishing (please wait...) 
.sdi.s3,正在建立（请稍等……）
#From:tsc.pingt,Ping Test 
tsc.pingt,Ping测试
#From:.WPApersonal,WPA-Personal 
.WPApersonal,WPA-个人
#From:.email,EMail Settings 
.email,Email设置
#From:PPPOE_EVENT_DISCOVERY_REQUEST,PPPoE confirming session offer 
PPPOE_EVENT_DISCOVERY_REQUEST,PPPoE确认会话提议
#From:.firewall,Firewall 
.firewall,防火墙
#From:wwa.wanmode.sipa,Static IP Address Connection 
wwa.wanmode.sipa,静态IP地址连接
#From:.syscheck,System Check 
.syscheck,系统检查
#From:help784,The LAN-side IP address of the client. 
help784,客户端的局域网端IP地址
#From:UNKNOWN,Unknown 
UNKNOWN,未知
#From:help322,Your D-Link router uses 192.168.0.1 for the IP address. You've assigned a computer that you want to designate as a Web server with a static IP address of 192.168.0.3. You've assigned another computer that you want to designate as an FTP server with a static IP address of 192.168.0.4. Therefore the starting IP address for your DHCP IP address range needs to be 192.168.0.5 or greater. 
help322,您的D-Link路由器使用的IP地址是192.168.0.1。您需要指定一台计算机作为Web服务器，其静态IP地址为192.168.0.3。您需要指定另一台计算机作为FTP服务器，其静态IP地址为192.168.0.4。因此您的DHCP IP地址范围的起始IP地址需要设为192.168.0.5或更靠后的IP地址。
#From:help.upnp.1,UPnP is short for Universal Plug and Play, which is a networking architecture that provides compatibility among networking equipment, software, and peripherals. This router has optional UPnP capability, and can work with other UPnP devices and software. 
help.upnp.1,UPnP是通用即插即用的缩写，是一种网络构架，可以为网络设备、软件和外围设备提供通用性。该路由器具有可选UPnP功能，并且可以与其他UPnP设备和软件共同工作。
#From:gw.gm.61,Wolfenstein: Enemy Territory 
gw.gm.61,Wolfenstein: Enemy Territory
#From:.optional,(optional) 
.optional,（可选）
#From:help181,Setting the Fragmentation value too low may result in poor performance. 
help181,设置太低的碎片值，可能会导致较低的性能。
#From:help569,Internet 
help569,互联网
#From:anet.intro,If you are not familiar with these Advanced Network settings, please read the help section before attempting to modify these settings. 
anet.intro,如果您对这些高级网络设置不熟悉，请在尝试更改这些设置前，参阅帮助部分。
#From:help862,Enter the email address where you want the email sent. 
help862,输入需要发送电子邮件的Email地址。
#From:IPNAT_TCP_BLOCKED_EGRESS_NOT_SYN,Blocked outgoing TCP packet from %v:%u to %v:%u as %s received but there is no active connection 
IPNAT_TCP_BLOCKED_EGRESS_NOT_SYN,阻塞输出TCP数据包，从%v:%u to %v:%u，%s已接收，但是没有活动的连接。
#From:ta.GWN,Gateway Name 
ta.GWN,网关名
#From:wprn.tt3,If you are not authorized to modify the router's configuration, contact the router administrator. 
wprn.tt3,如果您未被授权修改路由器的配置，请联系路由器管理员。
#From:help293,MTU: 
help293,MTU：
#From:help265.2,If your ISP has assigned a fixed IP address, select this option. The ISP provides the value for the 
help265.2,如果您的ISP分配了一个固定IP地址，选择该选项，ISP提供该值
#From:IPNAT_UNABLE_TO_CREATE_CONNECTION,Dropped packet from %v to %v (IP protocol %u) as unable to create new session 
IPNAT_UNABLE_TO_CREATE_CONNECTION,由于无法创建新会话的丢包率，从%v to %v (IP协议%u) 
#From:help270,Always on: 
help270,总是启用
#From:aw.title.2,Advanced Wireless Settings 
aw.title.2,高级无线设置
#From:.firewalls,Firewall Settings 
.firewalls,防火墙设置
#From:help186,Enables 802.11d operation. 802.11d is a wireless specification for operation in additional regulatory domains. This supplement to the 802.11 specifications defines the physical layer requirements (channelization, hopping patterns, new values for current MIB attributes, and other requirements to extend the operation of 802.11 WLANs to new regulatory domains (countries). The current 802.11 standard defines operation in only a few regulatory domains (countries). This supplement adds the requirements and definitions necessary to allow 802.11 WLAN equipment to operate in markets not served by the current standard. Enable this option if you are operating in one of these "additional regulatory domains". 
help186,启用802.11d操作，802.11d是一种无线规格，用于在额外规范网域中运行。该规格是对802.11规格的补充，定义了物理层的需求（信道化、期望模式、当前MIB属性的新数值、以及其他用于扩展802.11无线局域网在新的规范网域（国家）中运行的需求。当前的802.11标准定义仅适用与运行在少数的规范网域（国家），802.11d的补充加入了允许802.11 WLAN设备在当前标准不支持的市场中所需的需求和定义。如果您在这些“额外规范网域”中运行，请启用该选项。
#From:PPPOE_EVENT_UP,PPPoE session 0x%04X established 
PPPOE_EVENT_UP,PPPoE会话0x%04X已建立
#From:.protocol,Protocol 
.protocol,协议
#From:help372,WPA-Personal and WPA-Enterprise 
help372,WPA-个人和WPA-企业
#From:up.tz.32,(GMT+02:00) Bucharest 
up.tz.32,(GMT+02:00)布加勒斯特
#From:at.kbps,kbps 
at.kbps,kbps
#From:at.Cable,Cable Or Other Broadband Network 
at.Cable,电缆或其他宽带网络
#From:anet.wp.1,100Mbps 
anet.wp.1,100Mbps
#From:help17,Assign a meaningful name to the virtual server, for example <code>Web Server</code>. Several well-known types of virtual server are available from the "Application Name" drop-down list. Selecting one of these entries fills some of the remaining parameters with standard values for that type of server. 
help17,为虚拟服务器分配一个有意义的名称，如<code>Web Server</code>。在“应用程序名称”下拉列表中列出了多个常见的虚拟服务器类型。选择其中一个条目，根据标准数值，为该服务器类型填写其他的参数。
#From:ta.intro.Adm2,By default there is no password configured. It is highly recommended that you create a password to keep your router secure. 
ta.intro.Adm2,默认设置下，无需设置密码。出于安全考虑，强烈建议您为您的路由器创建一个密码。
#From:tool.admin.check,, Please check 
tool.admin.check,请检查
#From:IPPPPIPCP_PPP_LINK_UP,PPP network up with IP Address %v 
IPPPPIPCP_PPP_LINK_UP,通过IP地址%v建立PPP网络
#From:.stop,Stop 
.stop,停止
#From:GW_SYSLOG_STATUS,Syslog server set as IP address %v 
GW_SYSLOG_STATUS,Syslog服务器IP地址设置为%v
#From:bd.title.DHCPSSt,DHCP Server Settings 
bd.title.DHCPSSt,DHCP服务器设定
#From:help827,The name of the router can be changed here. 
help827,路由器名称不能在这里修改。
#From:tf.FWCheckInf,Check Latest Firmware Version 
tf.FWCheckInf,检查最新固件版本
#From:tf.FWInf,Firmware Information 
tf.FWInf,固件信息
#From:hhai.ipr,Up to eight ranges of WAN IP addresses can be controlled by each rule. The checkbox by each IP range can be used to disable ranges already defined. 
hhai.ipr,每个规则最多可以控制8个WAN IP地址范围，每个IP范围的多选框可以用于禁用已定义的范围。
#From:hhaw.1,It is recommended that you leave these parameters at their default values. Adjusting them could limit the performance of your wireless network. 
hhaw.1,建议您保留这些参数的缺省值。修改它们可能会限制您的无线网络性能。
#From:help34,Allows multiple VPN clients to connect to their corporate networks using IPSec. Some VPN clients support traversal of IPSec through NAT. This option may interfere with the operation of such VPN clients. If you are having trouble connecting with your corporate network, try disabling this option. 
help34,允许躲过VPN客户端使用IPSec。一些VPN客户端支持通过NAT的IPSec穿透。该选项可能会影响这些客户端的工作。如果您在链接公司网络时遇到困难，请尝试禁用改选项。
#From:tt.EnNTP,Enable NTP Server 
tt.EnNTP,输入NTP服务器
#From:help309,The subnet mask of your router on the local area network. 
help309,您的路由器在本地网络上的子网掩码。
#From:aa.alert.15,You cannot add new MAC addresses. You can only reuse MAC addresses from other policies. 
aa.alert.15,您不能添加新的MAC地址。您只能从其他策略中重新使用MAC地址。
#From:.savesettings,Save Settings 
.savesettings,保存设定
#From:help193,Give the schedule a name that is meaningful to you, such as "Weekday rule". 
help193,为日程取一个对您有意义的名称，比如“工作日规则”。
#From:help14.p,Virtual Server Parameters 
help14.p,虚拟服务器参数
#From:gw.gm.32,Need for Speed: Hot Pursuit 2 
gw.gm.32,极品飞车：热力追踪2
#From:IPNAT_TCP_BLOCKED_INGRESS_SYN,Blocked incoming TCP connection request from %v:%u to %v:%u 
IPNAT_TCP_BLOCKED_INGRESS_SYN,阻塞了从 %v:%u到 %v:%u的入站TCP连接请求。
#From:anet.msg.wan.ping,If you enable this feature, the WAN port of your router will respond to ping requests from the Internet that are sent to the WAN IP Address. 
anet.msg.wan.ping,如果您启用该特性，您路由器的WAN端口将对Internet上发送到WAN IP地址的ping请求进行回应。
#From:ai.intro.2,Inbound Filters can be used for limiting access to a server on your network to a system or group of systems. 
ai.intro.2,入站过滤规则可以用于限制一个系统或系统组对您网络中服务器的访问。
#From:help285,L2TP Subnet Mask 
help285,L2TP子网掩码
#From:ss.LANStats,LAN Statistics 
ss.LANStats,LAN统计数据
#From:ta.alert.4,A restore is already in progress. 
ta.alert.4,恢复正在进行中。
#From:.clone,Copy Your PC's MAC Address 
.clone,复制您计算机的MAC地址
#From:gw.gm.14,Diablo I and II 
gw.gm.14,暗黑破坏神I和II
#From:PPTP_ALG_GRE_UNABLE_TO_HANDLE_HEADER,Dropped GRE packet from %v to %v as unable handle packet header 
PPTP_ALG_GRE_UNABLE_TO_HANDLE_HEADER,由于无法处理数据包头，所以丢弃从%v到 %v的GRE数据包
#From:.aa.block.some,Block Some Access 
.aa.block.some,阻塞了一些访问
#From:help819.3,Established -- the connection is passing data. 
help819.3,已建立--连接正在传输数据。
#From:tt.time.24,11 pm 
tt.time.24,11 pm
#From:help873,Normally email is sent at the start time defined for a schedule, and the schedule end time is not used. However, rebooting the router during the schedule period will cause additional emails to be sent. 
help873,正常情况下email在为日程定义的开始时间上进行发送，而日程结束时间没有使用。但是，在日程期间重新启动路由器会导致发送额外的email。
#From:ss.Collisions,Collisions 
ss.Collisions,冲突
#From:help863,Enter the SMTP server address for sending email. 
help863,输入发送email的SMTP服务器地址。
#From:help397,This option enables configuration of an optional second RADIUS server. A second RADIUS server can be used as backup for the primary RADIUS server. The second RADIUS server is consulted only when the primary server is not available or not responding. The fields <span class="option">Second RADIUS Server IP Address</span>, <span class="option">RADIUS Server Port</span>, <span class="option">Second RADIUS server Shared Secret</span>, <span class="option">Second MAC Address Authentication</span> provide the corresponding parameters for the second RADIUS Server. 
help397,该选项启用一个可选备用RADIUS服务器的配置。备用RADIUS服务器可以用于对首选RADIUS服务器的支援。只有当首选服务器不可用或无法回应时才咨询备用RADIUS服务器。项目<span class="option">备用RADIUS服务器IP地址</span>，<span class="option">RADIUS服务器端口</span>，<span class="option">备用RADIUS服务器共享密码</span>，<span class="option">备用服务器MAC地址验证</span>为备用RADIUS服务器提供了相应的参数。
#From:av.title.VSL,Virtual Servers List 
av.title.VSL,虚拟服务器列表
#From:.off,Off 
.off,关闭
#From:tf.ENFA,Email me if a newer Firmware is available 
tf.ENFA,如果有新固件请给我发送email
#From:help13,With this Virtual Server entry, all Internet traffic on Port 8888 will be redirected to your internal web server on port 80 at IP Address 192.168.0.50. 
help13,通过该虚拟服务器体条目，所有在端口8888上的Internet流量将被重新定向到您的IP地址为192.168.0.50的内部web服务器上的80端口。
#From:wwa.title.s3,Step 3: Configure your Internet Connection 
wwa.title.s3,第三步：配置你的Internet连接
#From:GW_WAN_RATE_ESTIMATOR_CONVERGENCE_ERROR,WAN interface speed measurement aborted as they did not converge 
GW_WAN_RATE_ESTIMATOR_CONVERGENCE_ERROR,由于没有聚合，WAN接口速率测量被取消
#From:wwa.wanmode.bigpond,BigPond 
wwa.wanmode.bigpond,BigPond
#From:help254,The WAN (Wide Area Network) section is where you configure your Internet Connection type. 
help254,您是在WAN（广域网）网段上配置你的Internet连接类型的。
#From:haf.dmz.70,To handle incoming connections that use a protocol other than ICMP, TCP, UDP, and IGMP (also GRE and ESP, when these protocols are enabled by the PPTP and IPSec ALGs ). 
haf.dmz.70,处理使用了除ICMP，ICMP，TCP，UDP和IGMP以外协议的入站连接（也包括PPTP和IPSec ALG所启用的GRE和ESP）。
#From:GW_SCHED_ATTACH_FAILED,System error occured when attaching with schedule %s 
GW_SCHED_ATTACH_FAILED,当关联日程%s时发生系统错误
#From:.badssid,The SSID field can not be blank 
.badssid,SSID项不能为空
#From:RUNTIME_CONFIG_STORING_CONFIG_IN_NVRAM,Stored configuration to non-volatile memory 
RUNTIME_CONFIG_STORING_CONFIG_IN_NVRAM,将配置保存到非易失性存储器
#From:FW_UPDATE_AVAILABLE,Firmware Update is Available 
FW_UPDATE_AVAILABLE,固件升级已可用
#From:dlink.awf.intro.WF,The Website Filter option allows you to set up a list of Web sites you would like to allow or deny through your network. To use this feature, you must also select the "Apply Web Filter" checkbox in the Access Control section. 
dlink.awf.intro.WF,网站过滤选项允许您设置一个网站列表，以通过您的网络允许或禁止。要使用该特性，您必须在访问控制部分选中“应用Web过滤”多选框。
#From:help891,The Dynamic DNS feature allows you to host a server (Web, FTP, Game Server, etc.) using a domain name that you have purchased (www.whateveryournameis.com) with your dynamically assigned IP address. Most broadband Internet Service Providers assign dynamic (changing) IP addresses. When you use a Dynamic DNS service provider, your friends can enter your host name to connect to your server, no matter what your IP address is. 
help891,动态DNS特性允许您将一个使用您购买的域名（www.whateveryournameis .com)的服务器（Web, FTP, Game Server等）作为您的动态分配IP地址的主机。大多数宽带网络运营商会分配动态（改变的）IP地址。当您使用一个动态DNS服务器提供商时，无论您的IP地址是多少，您的朋友都可以输入您的主机名称来连接到您的服务器。
#From:help777,PPPoE, PPTP, L2TP Connection 
help777,PPPoE，PPTP，L2TP连接
#From:help393,MAC Address Authentication: 
help393,MAC地址验证：
#From:bwn.ict,Internet Connection Type 
bwn.ict,网络连接类型
#From:tt.Jun,Jun 
tt.Jun,六月
#From:IPL2TP_TUNNEL_CONNECTED,L2TP local tunnel 0x%04X has been connected to "%s" 
IPL2TP_TUNNEL_CONNECTED,L2TP本地通道0x%04X已连接到"%s"
#From:gw.gm.9,Command and Conquer Zero Hour 
gw.gm.9,命令与征服 零点行动
#From:gw.gm.2,Aliens vs. Predator 
gw.gm.2,异形VS.铁血战士
#From:wwl.wl.wiz,Wireless Network Setup Wizard 
wwl.wl.wiz,无线网络设置向导
#From:network.dhcp.range,DHCP Range Invalid, FROM not bigger than TO 
network.dhcp.range,DHCP范围无效，FROM小于TO
#From:wprn.intro6,Step 4: Print a test page 
wprn.intro6,第四步：打印一个测试页
#From:GW_BIGPOND_FAIL,BigPond failed, state=%d with error=%d, server response=%s 
GW_BIGPOND_FAIL,BigPond失败，状态=%d错误=%d，服务器回应=%s
#From:af.EFT.1,Address Restricted 
af.EFT.1,地址受限制
#From:.use_unicasting,Use Unicasting 
.use_unicasting,使用单播
#From:.networkstate,Network Status 
.networkstate,网络状态
#From:tt.Year,Year 
tt.Year,年
#From:IPASYNCFILEUSB_MOUNT_FAILED,Failed to mount USB device 
IPASYNCFILEUSB_MOUNT_FAILED,无法安装USB设备
#From:af.UEFT,UDP Endpoint Filtering 
af.UEFT,UDP端点过滤
#From:help356,By default the fastest possible transmission rate will be selected. You have the option of selecting the speed if necessary. 
help356,缺省情况下已选择了最大可能传输速率。您可以在必要时选择速率。
#From:help381,Pre-Shared Key: 
help381,预共享密码：
#From:.inboundfilter,Inbound Filter 
.inboundfilter,入站过滤规则
#From:.aa.apply.port.filter,Apply Advanced Port Filters 
.aa.apply.port.filter,应用高级端口过滤
#From:aa.FPR.c7,Dest<br />Port<br />End 
aa.FPR.c7,目的地<br />端口<br />结束
#From:gw.gm.27,Jedi Knight III: Jedi Academy 
gw.gm.27,绝地武士III：绝地学院
#From:BIGPOND_NOT_PROPERLY_CFGD,BigPond not properly configured 
BIGPOND_NOT_PROPERLY_CFGD,BigPond没有正确配置
#From:help335,As an alternative, you can locate a MAC address in a specific operating system by following the steps below: 
help335,作为一个替代方法，您可以通过以下步骤在特定操作系统中定位一个MAC地址：
#From:up.tz.58,(GMT+08:00) Perth 
up.tz.58,(GMT+08:00)佩思
#From:.never,Never 
.never,从不
#From:help801,Clicking this button erases all log entries. 
help801,单击该按钮删除所有的日志条目。
#From:tsc.pingt.msg105,Longest ping time (in milliseconds): 
tsc.pingt.msg105,最长ping时间（单位毫秒）：
#From:li.WJS,WARNING: JavaScript is not enabled for this browser! 
li.WJS,警告：该浏览器未启用Java脚本！
#From:te.ToEm,To Email Address 
te.ToEm,到Email地址
#From:tt.time.1,12 am 
tt.time.1,12 am
#From:help787,Signal 
help787,信号
#From:DHCP_CLIENT_GOT_LEASE,Obtained IP Address using DHCP. IP address is %v 
DHCP_CLIENT_GOT_LEASE,使用DHCP获得IP地址。IP地址为%v
#From:GW_EMAIL_SUBJ,Gateway Logs 
GW_EMAIL_SUBJ,网管日志
#From:IPPORTTRIGGERALG_UDP_PACKET_ALLOC_FAILURE,Port trigger ALG failed to allocate session for UDP packet from %v:%u to %v:%u 
IPPORTTRIGGERALG_UDP_PACKET_ALLOC_FAILURE,端口触发器ALGufa为 %v:%u到 %v:%u的UDP数据包分配会话
#From:bi.wiz,If you are new to networking and have never configured a router before, click on <span class="button_ref">Setup Wizard</span> and the router will guide you through a few simple steps to get your network up and running. 
bi.wiz,如果您是第一次接触网络并从未配置过路由器，请单击<span class="button_ref">设置向导</span>，路由器将引导您通过几个简单步骤使您的网络启用并工作。
#From:EGRESS,Out 
EGRESS,在外面
#From:hhpt.app,Check the <strong>Application Name</strong> drop down menu for a list of predefined applications. If you select one of the predefined applications, click the arrow button next to the drop down menu to fill out the corresponding field. 
hhpt.app,查看<strong>应用程序名称</strong>下拉菜单中的预定义应用程序列表。如果您选择了一个预定义应用程序，单击下拉菜单旁边箭头按钮以填入相应的项目。
#From:.dhcpconn,DHCP Connection (Dynamic IP Address) 
.dhcpconn,DHCP连接（动态IP地址）
#From:bln.title.Rtrset,Router Settings 
bln.title.Rtrset,路由器设定
#From:.ps,Print Server 
.ps,打印服务器
#From:1044,This entry is optional. Enter a domain name for the local network. The AP's DHCP server will give this domain name to the computers on the wireless LAN. So, for example, if you enter <code>mynetwork.net</code> here, and you have a wireless laptop with a name of <code>chris</code>, that laptop will be known as <code>chris.mynetwork.net</code>. 
1044,该条目为可选。为本地网络输入一个域名。AP地址DHCP服务器将该域名分配给无线网络中的计算机。例如，如果您输入<code>mynerwork.net</code>，而且您有一个名称为<code>chris</code>的无线笔记本电脑，则该笔记本电脑将作为<code>chris.mynetwork.net</code>.
#From:wwl.text.best,Select this option if your wireless adapters SUPPORT WPA2 
wwl.text.best,如果您的无线适配器支持WPA2则选择该选项
#From:wwa.pptp.svraddr,PPTP Server IP Address (may be same as gateway) 
wwa.pptp.svraddr,PPPTP服务器IP地址（可能与网管相同）
#From:GW_WAN_RATE_ESTIMATOR_RATE_COMPLETED_WITH_SPEED,WAN interface speed measurement completed. Upstream speed is %u kbps 
GW_WAN_RATE_ESTIMATOR_RATE_COMPLETED_WITH_SPEED,WAN接口速率测量完成。上行速率为%u kbps
#From:.LANComputers,LAN Computers 
.LANComputers,LAN计算机
#From:hhte.intro,You may want to make the email settings similar to those of your email client program. 
hhte.intro,您可能想要将email设定为与您的email客户端程序相似
#From:as.NM,H.323 (Netmeeting) 
as.NM,H.323（网络会议）
#From:wwa.setupwiz,Setup Wizard 
wwa.setupwiz,设置向导
#From:help264,and 
help264,和
#From:bw.WDUU.note,(compatibility for some DHCP Servers) 
bw.WDUU.note,（与一些DHCP服务器的兼容性）
#From:as.MMS,MMS 
as.MMS,MMS
#From:.srvname,Service Name 
.srvname,服务名称
#From:help93,The rule applies to a flow of messages whose LAN-side IP address falls within the range set here. 
help93,应用到LAN IP地址在所设置范围内的信息流上的规则。
#From:tt.Minute,Minute 
tt.Minute,分钟
#From:sa.State,State 
sa.State,状态
#From:aw.dE,802.11d Enable 
aw.dE,启用802.11d
#From:tsc.pingt.h,Host Name or IP Address 
tsc.pingt.h,主机名或IP地址
#From:ss.WStats,Wireless Statistics 
ss.WStats,无线统计数据
#From:IPMSCHAP_AUTH_SEND_CHALLENGE,MSCHAP authenticator send challenge. 
IPMSCHAP_AUTH_SEND_CHALLENGE,MSCHAP验证方发送挑战。
#From:wprn.intro1,Welcome to the D-Link Printer Setup Wizard 
wprn.intro1,欢迎使用D-Link打印设置向导
#From:help889,When this option is enabled, your router will check online periodically to see if a newer version of the firmware is available. 
help889,当启用该选项时，您的路由器将周期性检查网络，以查看是否有新版本固件可用。
#From:as.H323,H.323 (NetMeeting) 
as.H323,H.323（网络会议）
#From:tool.admin.pfname,Port Forwarding Item 
tool.admin.pfname,端口转发项目
#From:IPNAT_SESSION_ALREADY_EXISTS,Dropped packet from %v to %v (protocol %u) as session already exists 
IPNAT_SESSION_ALREADY_EXISTS,由于会话已存在，丢弃了从%v到%v的数据包(协议%u)
#From:wwa.title.set.bigpond,Set BigPond Cable Connection 
wwa.title.set.bigpond,设置BigPond线缆连接
#From:up.tz.16,(GMT-04:00) Santiago 
up.tz.16,(GMT-04:00)圣地亚哥
#From:GW_BIGPOND_STATUS,BigPond state changed, new state=%d 
GW_BIGPOND_STATUS,BigPond状态已改变，新状态=%d
#From:wwa.msg.set.bigpond,To set up this connection you will need to have a Username and Password from your Internet Service Provider. You also need BigPond Server IP adress. If you do not have this information, please contact your ISP. 
wwa.msg.set.bigpond,要设置该连接您需要您的网络运营商提供的用户名和密码。您还需要BigPond服务器IP地址。如果您没有这些信息，请联系您的ISP。
#From:te.EnAuth,Enable Authentication 
te.EnAuth,启用验证
#From:help848,Select this option if you want to synchronize the router's clock to a Network Time Server over the Internet. If you are using schedules or logs, this is the best way to ensure that the schedules and logs are kept accurate. 
help848,如果您想要路由器与一个Internet上的网络时间服务器时间同步，则选择该选项。如果您正在使用日程或日志，这是保证日程和日志保持准确的最好方法。
#From:gw.gm.41,Return to Castle Wolfenstein 
gw.gm.41,重返德军总部
#From:.aa.pol.wiz,Policy Wizard 
.aa.pol.wiz,策略向导
#From:IP_FILTERS,IP Filters 
IP_FILTERS,IP过滤规则
#From:gw.gm.50,Starsiege Tribes 
gw.gm.50,星际围攻部落
#From:wwa.intro.s3,Your Internet Connection could not be detected, please select your Internet Service Provider (ISP) from the list below. If your ISP is not listed; select the "Not Listed or Don't Know" option to manually configure your connection. 
wwa.intro.s3,无法检测到您的Internet连接，请在下面选择您的网络服务运营商。如果您的ISP没有在列表内；选择“未列出或不知道”选项以手动配置您的连接。
#From:IPSEC_ALG_ESP_ESTABLISH_ALREADY_PENDING,Dropped ESP packet from %v as connection attempt already pending from %v to %v 
IPSEC_ALG_ESP_ESTABLISH_ALREADY_PENDING,由于从%v到%v的连接请求已挂起，所以丢弃来自%v的ESP数据包
#From:help59,Individual (80, 68, 888) 
help59,个人（80, 68, 888）
#From:wps.reboot.need,Are you sure you want to reset the device to Unconfiged? 
wps.reboot.need,您确定要重新启动设备回复未配置状态吗？
#From:at.DF,Dynamic Fragmentation 
at.DF,动态片段
#From:help265.7,If the ISP's servers assign the router's IP addressing upon establishing a connection, select this option. 
help265.7,如果ISP服务器在通过建立一个连接来为路由器分配IP地址，则选择该选项。
#From:tt.alert.dstchkmonth,DST end month must be different than DST start month 
tt.alert.dstchkmonth,DST结束月份必须与DST开始月份不相同
#From:up.tz.23,(GMT-01:00) Cape Verde Is. 
up.tz.23,(GMT-01:00)佛得角
#From:.advanced,Advanced 
.advanced,高级
#From:STATIC_IP_ADDRESS,Static IP Address 
STATIC_IP_ADDRESS,静态IP地址
#From:wwl.title.s3,Step 2: Secure your Wireless Network 
wwl.title.s3,第二步：保证您的无线网络安全
#From:hhsw.intro,This is a list of all wireless clients that are currently connected to your wireless router. 
hhsw.intro,这是当前连接到您的无线路由器的所有无线客户端列表。
#From:ish.menu,Menu 
ish.menu,菜单
#From:up.tz.33,(GMT+02:00) Cairo 
up.tz.33,(GMT+02:00)开罗
#From:GW_FW_NOTIFY_FIRMWARE_ERROR,Failed to check for new firmware 
GW_FW_NOTIFY_FIRMWARE_ERROR,无法查找新固件
#From:.bsecure.more.info,More info... 
.bsecure.more.info,更多信息…
#From:tf.CFWV,Current Firmware Version 
tf.CFWV,当前固件版本
#From:tt.week.2,2nd 
tt.week.2,第二
#From:help3,Example: 
help3,例如：
#From:.creator,Creator 
.creator,创建方
#From:bln.title.DNSRly,DNS Relay 
bln.title.DNSRly,DNS中继
#From:GW_INET_ACCESS_DROP_PORT_FILTER_MAC,Internet access port filter dropped packet from %v:%u[%s] to %v:%u (protocol %u) 
GW_INET_ACCESS_DROP_PORT_FILTER_MAC,Internet访问端口过滤丢弃了从%v:%u[%s]到 %v:%u的数据包（协议%u）
#From:ish.glossary,Glossary 
ish.glossary,术语表
#From:wwl.s4.intro.z4,A longer WEP key is more secure than a short one 
wwl.s4.intro.z4,较长的WEP密码比短密码更为安全
#From:help118,By default, the Access Control feature is disabled. If you need Access Control, check this option. 
help118,缺省情况下，访问控制特性为禁用。如果您需要访问控制，选中该选项。
#From:gw.gm.66,Shareaza 
gw.gm.66,Shareaza
#From:help312dr2,When DNS Relay is enabled, the router plays the role of a DNS server. DNS requests sent to the router are forwarded to the ISP's DNS server. This provides a constant DNS address that LAN computers can use, even when the router obtains a different DNS server address from the ISP upon re-establishing the WAN connection. You should disable DNS relay if you implement a LAN-side DNS server as a virtual server. 
help312dr2,当DNS中继启用时，路由器则作为DNS服务器。发送到路由器的DNS请求被转发到ISP的DNS服务器。这就提供了一个LAN计算机能使用的不变的DNS地址，即使路由器在重新建立的WAN连接上从ISP获得不同的DNS服务器地址。如果您将LAN端DNS服务器作为一个虚拟服务器，则您需要禁用DNS中继。
#From:tsc.24hrs,All Day - 24 hrs 
tsc.24hrs,全天-24小时
#From:hhag.10,Check the <strong>Application Name</strong> drop down menu for a list of predefined applications. If you select one of the predefined applications, click the arrow button next to the drop down menu to fill out the corresponding field. 
hhag.10,查看<strong>应用程序名称</strong>下拉菜单中的预定义应用程序列表。如果您选择了一个预定义应用程序，单击下拉菜单旁边箭头按钮以填入相应的项目。
#From:help261,Some ISP's may check your computer's Host Name. The Host Name identifies your system to the ISP's server. This way they know your computer is eligible to receive an IP address. In other words, they know that you are paying for their service. 
help261,某些ISP可能会检查您的计算机的主机名称。主机名向ISP服务器识别您的身份。通过该方法他们获知您的计算机可以获得一个IP地址。换句话说，他们知道您在为他们的服务付费。
#From:as.TPrt,Trigger Traffic Type 
as.TPrt,触发流量类型
#From:help28,This will happen if you have an Access Control Rule configured for this LAN machine. 
help28,这将在您配置了一个针对该LAN设备的访问控制规则时发生。
#From:tt.time.12,11 am 
tt.time.12,11 am
#From:ss.reload,Refresh Statistics 
ss.reload,刷新统计数据
#From:haf.dmz.30,Packets received by the DMZ host have their IP addresses translated from the WAN-side IP address of the router to the LAN-side IP address of the DMZ host. However, port numbers are not translated; so applications on the DMZ host can depend on specific port numbers. 
haf.dmz.30,DMZ主机接收到的数据包带有的IP地址是由路由器的WAN端IP地址转换为DMZ主机的LAN端IP地址的。但是，端口号没有转换；英雌DMZ主机上的应用程序可以依靠特定的端口号。
#From:sps.fp,The following <span id="status_text">printer is</span> attached to your router. 
sps.fp,以下<span id="status_text">打印机是</span>与您的路由器连接。
#From:gw.gm.57,Unreal Tournament 2004 
gw.gm.57,虚幻竞技场2004
#From:wwa.msg.dhcp,Choose this if your Internet connection automatically provides you with an IP Address. Most Cable Modems use this type of connection. 
wwa.msg.dhcp,如果您的Internet连接自动为您提供一个IP地址请选择该项目。大多数同轴线缆Modem使用该连接类型。
#From:aa.wiz.s1.msg1,Step 1 - Choose a unique name for your policy 
aa.wiz.s1.msg1,第一步-为您的策略选择一个唯一的名称
#From:MUST_BE_LOGGED_IN_AS_ADMIN,You must be logged in as 'admin' to perform this action 
MUST_BE_LOGGED_IN_AS_ADMIN,您需要以“admin”登录来执行该操作
#From:up.tz.64,(GMT+09:30) Darwin 
up.tz.64,(GMT+09:30)达尔文
#From:GW_WLS_SCHEDULE_STOP,gw_wireless_schedule stop 
GW_WLS_SCHEDULE_STOP,gw_wireless_schedule停止
#From:IPWOLALG_REJECTED_PACKET,Wake-on-LAN ALG rejected packet from %v:%u to %v:%u 
IPWOLALG_REJECTED_PACKET,局域网唤醒ALG拒绝从%v:%u到%v:%u的数据包
#From:WCN_LOG_UPDATE,Update device to wsetting.wfc 
WCN_LOG_UPDATE,将设备更新为wsetting.wfc
#From:help80,This option should be enabled when you have a slow Internet uplink. It helps to reduce the impact that large low priority network packets can have on more urgent ones by breaking the large packets into several smaller packets. 
help80,当您的Internet上行连接较慢时启用该选项。它可以通过将较大数据包分为几个较小数据包，来降低较大的低优先级数据包可能对较紧急数据包的影响。
#From:help171,Here you can add entries to the Inbound Filter Rules List below, or edit existing entries. 
help171,您可以在这里为下面的入站过滤规则列表添加条目，或编辑已有的条目。
#From:.Mon,Mon 
.Mon,星期一
#From:up.tz.66,(GMT+10:00) Canberra, Melbourne, Sydney 
up.tz.66,(GMT+10:00)堪培拉,墨尔本,悉尼
#From:wwl.title.s4.2,Step 2: Set your Wireless Security Password 
wwl.title.s4.2,第二步：设置您的无线安全密码
#From:help196,If you don't use the All DayDay option, then you enter the time here. The start time is entered in two fields. The first box is for the hour and the second box is for the minute. Email events are normally triggered only by the start time. 
help196,如果您没有使用全天选项，则在这里输入时间。在两个项目中输入开始时间。第一个文本框为小时，第二个文本框为分钟。Email事件通常在开始事件被触发。
#From:PPPOE_EVENT_DISCOVERY_REQUEST_ERROR,PPPoE session offer had errors. Connection attempt failed. 
PPPOE_EVENT_DISCOVERY_REQUEST_ERROR,PPPoE会话发生严重错误。连接尝试失败。
#From:li.Log_In,Log In 
li.Log_In,登录
#From:af.gss,Non-UDP/TCP/ICMP LAN Sessions 
af.gss,非UDP/TCP/ICMP LAN会话
#From:.defgw,Default Gateway 
.defgw,缺省网管
#From:tt.NTPSrvU,NTP Server Used 
tt.NTPSrvU,已使用NTP服务器
#From:add_wireless_device,Adding wireless device: 
add_wireless_device,添加无线设备：
#From:help8,Enter the Public Port as [8888] 
help8,输入公共端口为[8888]
#From:help258,Your ISP provides you with all of this information. 
help258,您的ISP提供所有这些信息。
#From:PPPOE_EVENT_TERMINATED,PPPoE session 0x%04X terminated by access concentrator 
PPPOE_EVENT_TERMINATED,PPPoE会话0x%04X被访问集中器终止
#From:up.rb.1,Are you sure you want to reboot the device? 
up.rb.1,您确定要重新启动设备吗？
#From:help25.b,Use the checkboxes at the left to activate or deactivate completed Virtual Server entries. 
help25.b,使用左边的多选框来激活或停用完整的虚拟服务器条目。
#From:sl.saveLog,Save Log 
sl.saveLog,保存日志
#From:sl.intro,Use this option to view the router logs. You can define what types of events you want to view and the event levels to view. This router also has internal syslog server support so you can send the log files to a computer on your network that is running a syslog utility. 
sl.intro,使用该选项来查看路由器日志。您可以定义您想要查看的事件类型和事件级别。该路由器也支持内部系统日志服务器，因此您可以向您网络上的一台运行系统日志工具的计算机发送日志文件。
#From:.aa.wiz.s4.help,Specify a machine with its IP or MAC address, or select "Other Machines" for machines that do not have a policy. 
.aa.wiz.s4.help,指定带有IP或MAC地址的设备，或选择“其他设备”以指定没有带策略的设备。
#From:GW_WAN_CARRIER_LOST,WAN interface cable has been disconnected 
GW_WAN_CARRIER_LOST,WAN接口线缆未连接
#From:bwn.bytes,(bytes) 
bwn.bytes,（字节）
#From:help890_1,Register the email notification service online to receive an email notification when a newer version of the firmware is available. 
help890_1,在网络上注册email通知服务，以便在新的固件版本可用时接受email通知。
#From:help779,BigPond Connection 
help779,BigPond连接
#From:.macaddr,MAC Address 
.macaddr,MAC地址
#From:help823.13,Reset or closed TCP connections. The connection does not close instantly so that lingering packets can pass or the connection can be re-established. 
help823.13,重新启动或关闭TCP连接。连接未立即关闭，因此延迟的数据包可以通过或可以重新建立连接。
#From:anet.multicast.enable,Enable Multicast Streams 
anet.multicast.enable,启用多播流
#From:GW_DYNDNS_UPDATE_NEXT,Next dynamic DNS update scheduled for %s 
GW_DYNDNS_UPDATE_NEXT,下一次动态DNS更新定于%s
#From:help866,Enter the password associated with the account. 
help866,输入于帐号对应的密码
#From:sl.RStat,Router Status 
sl.RStat,路由器状态
#From:gw.gm.78,Roger Wilco 
gw.gm.78,网络对讲机
#From:help90,Create a name for the rule that is meaningful to you. 
help90,为规则建立一个对您有意义的名称。
#From:PPTP_EVENT_TUNNEL_DOWN,PPTP tunnel ID 0x%04X has been closed 
PPTP_EVENT_TUNNEL_DOWN,ID为 0x%04X的PPTP通道已被关闭
#From:bwn.SWM,Static WAN Mode 
bwn.SWM,静态WAN模式
#From:IPWEBFILTER_REJECTED_PACKET,Web filter rejected packet from %v:%u to %v:%u 
IPWEBFILTER_REJECTED_PACKET,Web过滤拒绝了从%v:%u到%v:%u的数据包
#From:GW_UPGRADE_FAILED,Invalid firmware upgrade image uploaded - discarding it 
GW_UPGRADE_FAILED,载入的更新固件无效-丢弃
#From:ag.intro,This option is used to open multiple ports or a range of ports in your router and redirect data through those ports to a single PC on your network. This feature allows you to enter ports in various formats including, Port Ranges (100-150), Individual Ports (80, 68, 888), or Mixed (1020-5000, 689). 
ag.intro,该选项用于打开您的路由器的多个端口或一个端口范围并通过这些端口重新将数据定向到您网络中的一台计算机。该特性允许您用多种格式输入端口，包括端口范围（100-150），单个端口（80，68，888），或混合格式（1020-5000，689）。
#From:ta.intro.Adm,The Admin option is used to set a password for access to the Web-based management. By default there is no password configured. It is highly recommended that you create a password to keep your new router secure. 
ta.intro.Adm,Admin选项用于设置访问Web管理的密码。缺省情况下没有配置密码。强烈推荐您为新路由器的安全建立一个密码。
#From:bwn.L2TPSIPA,L2TP Server IP Address 
bwn.L2TPSIPA,L2TP服务器IP地址
#From:GW_INET_ACCESS_UNRESTRICTED,No Internet access policy is in effect. Unrestricted Internet access allowed to everyone 
GW_INET_ACCESS_UNRESTRICTED,没有有效的Internet访问策略。对于每个人没有Internet访问限制。
#From:up.tz.11,(GMT-05:00) Bogota, Lima, Quito 
up.tz.11,(GMT-05:00)波哥大,利马,基多
#From:.disabled,Disabled 
.disabled,禁用
#From:GW_LOG_EMAIL_ON_LOG_FULL,Sending log email as log is full 
GW_LOG_EMAIL_ON_LOG_FULL,由于日志已满，发送日志email
#From:tt.time.8,7 am 
tt.time.8,7 am
#From:help43,Allows Windows Media Player, using MMS protocol, to receive streaming media from the internet. 
help43,允许使用MMS协议的Windows媒体播放器从Internet接收流媒体。
#From:ddns.connecting,Connecting 
ddns.connecting,连接
#From:help282,Typically PPTP connections are not always on. The D-Link router allows you to set the reconnection mode. The settings are: 
help282,典型的PPTP连接并不是总是连接状态。D-Link路由器允许您重新连接模式。设定有：
#From:aa.EAC,Enable Access Control 
aa.EAC,启用访问控制
#From:te.OnFull,On Log Full 
te.OnFull,基于日志已满
#From:tt.Apr,Apr 
tt.Apr,四月
#From:tt.alert.invlddt,Invalid Date or Time 
tt.alert.invlddt,无效日期或时间
#From:bwl.MS,(Mbit/s) 
bwl.MS,(Mbit/s)
#From:wwa.intro.wel,This wizard will guide you through a step-by-step process to configure your new D-Link router and connect to the Internet. 
wwa.intro.wel,该想到将引导您通过一步步的过程配置您的新D-Link路由器并连接到Internet。
#From:tool.admin.portconflict,Remote Admin Port conflict with 
tool.admin.portconflict,远程Admin端口与…冲突
#From:gw.SelVS,Application Name 
gw.SelVS,应用程序名称
#From:bwn.RM.0,Always on 
bwn.RM.0,总是开启
#From:hhai.edit,Click the <strong>Edit</strong> icon in the Rules List to change a rule. 
hhai.edit,单击规则列表中的<strong>Edit</strong>图标来修改规则。
#From:te.FromEm,From Email Address 
te.FromEm,从Email地址
#From:wt.p.1,The gateway is currently measuring your network connection. 
wt.p.1,网管正在测量您的网络连接。
#From:NET_RTC_REQUEST_TIME,Requesting time from %v 
NET_RTC_REQUEST_TIME,来自%v的请求时间
#From:help824,Enter a password for the user "admin", who will have full access to the Web-based management interface. 
help824,为用户“admin”输入一个密码，该用户对Web管理界面有完全的访问权限。
#From:N_A,N/A 
N_A,N/A
#From:help279,PPTP Subnet Mask 
help279,PPTP子网掩码
#From:tt.week.6,6th 
tt.week.6,第六
#From:gw.gm.48,Soldier of Fortune II: Double Helix 
gw.gm.48,命运战士II：双重螺旋
#From:bwl.VS.1,Invisible 
bwl.VS.1,不可见
#From:help882,Confirm updated firmware revision on status page. 
help882,在状态页面确认已更新的固件版本。
#From:up.tz.41,(GMT+03:00) Tehran 
up.tz.41,(GMT+03:00)德黑兰
#From:RUNTIME_CONFIG_LOADED_CONFIG_FROM_NVRAM,Loaded configuration from non-volatile memory 
RUNTIME_CONFIG_LOADED_CONFIG_FROM_NVRAM,从非易失性存储器中装载配置
#From:li.alert.1,Session timeout, please try again. 
li.alert.1,会话超时，请重试。
#From:help307,The IP address of your router on the local area network. Your local area network settings are based on the address assigned here. For example, 192.168.0.1. 
help307,您的路由器在本地局域网上的IP地址。您的本地局域网设定是基于这里分配的地址的。例如，192.168.0.1。
#From:help273,A connection to the Internet is made as needed. 
help273,Internet连接已按需要连接。
#From:gw.gm.81,PlayStation2 
gw.gm.81,PlayStation2
#From:up.rb.4,Are you sure you want to reset the device to its factory default settings? 
up.rb.4,您确定要重新启动设备恢复出厂缺省设定吗？
#From:NEWER_FW_VERSION,Newer Firmware Version %d.%d for your %s %s router is now available at 
NEWER_FW_VERSION,新固件版本%d.%d在您的%s %s路由器中已可用
#From:bwn.PPTPICT,PPTP Internet Connection Type 
bwn.PPTPICT,PPTPInternet连接类型
#From:GW_UPGRADE_SUCCEEDED,Firmware upgrade image successfully uploaded - installing 
GW_UPGRADE_SUCCEEDED,固件更新文件成功载入-正在安装
#From:bwl.AS,(Also called the SSID) 
bwl.AS,（也叫SSID）
#From:help96,The rule applies to a flow of messages whose WAN-side port number is within the range set here. 
help96,应用到WAN端端口号在所设范围内的信息流上的规则。
#From:.wchannel,Wireless Channel 
.wchannel,无线通道
#From:wwz.manual.key,Manually assign a network key 
wwz.manual.key,手动分配网络密码
#From:wps.p3.5,please press the push button on your wireless device and click the below 'Connect' Button within 120 seconds 
wps.p3.5,请按下您的无线设备上的按钮并在120秒内单击下面的“连接”按钮
#From:tps.enlpd,Enable LPD/LPR Printing 
tps.enlpd,启用LPD/LPR打印
#From:.L2TP,L2TP 
.L2TP,L2TP
#From:bd.DIPAR,DHCP IP Address Range 
bd.DIPAR,DHCP IP地址范围
#From:.stats,Statistics 
.stats,统计数据
#From:wwl.s4.intro.za2,- Between 8 and 64 characters (A longer WPA key is more secure than a short one) 
wwl.s4.intro.za2,在8和64个字符之间（一个较长的WPA密码比短密码更为安全）
#From:IPL2TP_SESSION_DOWN,L2TP local session 0x%04X is down 
IPL2TP_SESSION_DOWN,L2TP本地会话0x%04X已关闭
#From:bwn.DIAICT,Dynamic IP (DHCP) Internet Connection Type 
bwn.DIAICT,动态IP（DHCP）Internet连接类型
#From:help338,Go to the Start menu, select Run, type in <code>winipcfg</code>, and hit Enter. A popup window will be displayed. Select the appropriate adapter from the pull-down menu and you will see the Adapter Address. This is the MAC address of the device. 
help338,选择开始菜单，运行，输入 <code>winipcfg</code>，并按回车键。将显示一个弹出的窗口。从下拉菜单选择适当的适配器，您将看到适配器地址。这是设备的MAC地址。
#From:help859,Enter the LAN IP address of the Syslog Server. 
help859,输入系统日志服务器的LAN IP地址。
#From:.add,Add 
.add,添加
#From:.acccon,Access Control 
.acccon,访问控制
#From:tsc.pingt.msg4,Unable to resolve, check that the name is correct. 
tsc.pingt.msg4,无法解析，检查名称是否正确。
#From:ddns.disconnect,Disconnect 
ddns.disconnect,断开连接
#From:.verifypw,Verify Password 
.verifypw,验证密码
#From:am.intro.2,Configure MAC Filtering 
am.intro.2,配置MAC过滤
#From:.aa.pol.add,Add Policy 
.aa.pol.add,添加策略
#From:gw.gm.59,Warcraft II 
gw.gm.59,星际争霸II
#From:help11,Click <span class="button_ref">Save</span> to add the settings to the Virtual Servers List 
help11,单击<span class="button_ref">Save</span>来向虚拟服务器列表添加设定。
#From:.system,System 
.system,系统
#From:help261a,This option is normally turned off, and should remain off as long as the WAN-side DHCP server correctly provides an IP address to the router. However, if the router cannot obtain an IP address from the DHCP server, the DHCP server may be one that works better with unicast responses. In this case, turn the unicasting option on, and observe whether the router can obtain an IP address. In this mode, the router accepts unicast responses from the DHCP server instead of broadcast responses. 
help261a,该选项一般为关闭，并且只要WAN端的DHCP服务器向路由器正确提供IP地址，则应保持关闭状态。但是，如果路由器无法从DHCP服务器获得IP地址，则该DHCP服务器可能对单播回应运行更好。在这种情况下，将单播选项打开，并观察路由器是否能获得一个IP地址。在该模式下，路由器接收来自DHCP服务器的单播回应而不是广播回应。
#From:up.tz.02,(GMT-10:00) Hawaii 
up.tz.02,(GMT-10:00)夏威夷
#From:hhtsc.pingt.intro,"Ping" checks whether a computer on the Internet is running and responding. 
hhtsc.pingt.intro,“ping”检查Internet上的电脑是否在工作并回应。
#From:help5,Name the Virtual Server (for example: <code>Web Server</code>) 
help5,为虚拟服务器取名（例如：<code>Web服务器</code>）
#From:help767s,Support Menu 
help767s,支持菜单
#From:gw.gm.45,Splinter Cell: Pandora Tomorrow 
gw.gm.45,细胞分裂：明日潘多拉
#From:wwa.wanmode.pppoe,Username / Password Connection (PPPoE) 
wwa.wanmode.pppoe,用户名/密码连接（PPPoE）
#From:GW_ROUTES_GATEWAY_SUBNET_SAME,Destination and Gateway should not reside on the same subnet %v 
GW_ROUTES_GATEWAY_SUBNET_SAME,目的地和网管不能在相同子网%v
#From:haf.dmz.60,A host needs to support several applications that might use overlapping ingress ports such that two port forwarding rules cannot be used because they would potentially be in conflict. 
haf.dmz.60,一个主机需要支持多个应用程序，这些应用程序可能使用重复的进入端口，由于这样的两个端口会暂时冲突而使转发规则不能使用。
#From:te.intro.Em,The Email feature can be used to send the system log files, router alert messages, and firmware update notification to your email address. 
te.intro.Em,Email特性可用于向您的email地址发送系统日志文件，路由器警报信息，和固件更新通知。
#From:wwl.text.none,Select this option if you do not want to activate any security features 
wwl.text.none,如果您不想激活任何安全特性则选择该选项
#From:help895,Enter the username or key provided by your service provider. If the Dynamic DNS provider supplies only a key, enter that key in all three fields. 
help895,如果您的服务提供商提供的用户名或密码。如果动态DNS提供商只提供一个密码，则在三个项目中都输入该密码。
#From:help269,Typically PPPoE connections are not always on. The D-Link router allows you to set the reconnection mode. The settings are: 
help269,典型的PPTP连接并不是总是连接状态。D-Link路由器允许您重新连接模式。设定有：
#From:GW_WAN_RECONNECT_ON_ACTIVE,Attempting to re-connect on-demand WAN connection 
GW_WAN_RECONNECT_ON_ACTIVE,正在尝试重新连接按需WAN连接
#From:aa.Machine,Machine 
aa.Machine,设备
#From:GW_WLS_SCHEDULE_INIT,gw_wireless_schedule init 
GW_WLS_SCHEDULE_INIT,gw_wireless_schedule初始化
#From:.Wed,Wed 
.Wed,星期三
#From:tt.time.20,7 pm 
tt.time.20,7 pm
#From:aa.FPR.c3,Dest IP<br />Start 
aa.FPR.c3,目的IP<br />起始
#From:help68,Enter the TCP ports to open (for example <code>6159-6180, 99</code>). 
help68,输入要打开的TCP端口（例如<code>6159-6180，99</code>）。
#From:help150,It is most useful to prevent unauthorized wireless devices from connecting to your network. 
help150,它能最大限度的防止未授权无线设备连接到您的网络。
#From:te.Acct,Account Name 
te.Acct,帐号名称
#From:IPSMTPCLIENT_MSG_SENT,SMTP client succeeded sending email 
IPSMTPCLIENT_MSG_SENT,SMTP客户端成功发送email
#From:gw.gm.38,Quake 3 
gw.gm.38,雷神之锤3
#From:help384,This option works with a RADIUS Server to authenticate wireless clients. Wireless clients should have established the necessary credentials before attempting to authenticate to the Server through this Gateway. Furthermore, it may be necessary to configure the RADIUS Server to allow this Gateway to authenticate users. 
help384,该选项通过RADIUS服务器来验证无线客户端。无线客户端应该在通过该网关尝试服务器验证前建立必要的证书。另外，可能需要配置RADIUS服务器允许该网关验证用户。
#From:tt.time.2,1 am 
tt.time.2,1 am
#From:at.AUS,Automatic Uplink Speed 
at.AUS,自动上行链接速率
#From:hhts.del,Click the <strong>Delete</strong> icon to permanently delete a schedule. 
hhts.del,单击<strong>Delete</strong>图标来永久删除一个日程。
#From:help818,The preference given to outbound packets of this conversation by the QoS Engine logic. Smaller numbers represent higher priority. 
help818,QoS引擎逻辑分配给该会话的出站数据包的优先权。越小的数字代表越高的优先级。
#From:help886,Firmware upgrade cannot be performed from a wireless device. To perform an upgrade, ensure that you are using a PC that is connected to the router by wire. 
help886,无线设备不能进行固件升级。要升级固件，确保您使用的计算机有线连接到路由器。
#From:.aa.wiz.s2.msg,Choose a unique name for your policy. 
.aa.wiz.s2.msg,为您的策略选择一个唯一的名称
#From:help52,Select the protocol used by the Internet traffic coming back into the router through the opened port range (for example <code>Both</code>). 
help52,选择因特网流量从打开的端口范围回到路由器所使用的协议(如<code>Both</code>)
#From:wps.KR46,seconds ... 
wps.KR46,秒…
#From:wwz.wwl.intro.s3.1,Give your network a name, using up to 32 characters. 
wwz.wwl.intro.s3.1,赋予您的网络一个名称，最多使用32个字符
#From:gw.gm.19,Ghost Recon 
gw.gm.19,Ghost Recon 
#From:td.intro.DDNS,The DDNS feature allows you to host a server (Web, FTP, Game Server, etc...) using a domain name that you have purchased (www.whateveryournameis.com) with your dynamically assigned IP address. Most broadband Internet Service Providers assign dynamic (changing) IP addresses. Using a DDNS service provider, your friends can enter your host name to connect to your game server no matter what your IP address is. 
td.intro.DDNS,DDNS特征允许您使用（www.whateveryournameis.com）购买的域名和动态分配的IP地址绑定来定位一个服务器（Web, FTP, Game Server,等...）。大多数的因特网服务供应商分配动态（改变）IP地址。使用一个DDNS服务供应商，您可以友好地输入您主机的名称就可以连接到您的游戏服务器而不管您的IP地址是多少。
#From:up.tz.53,(GMT+07:00) Bangkok, Hanoi, Jakarta 
up.tz.53,(GMT+07:00) Bangkok, Hanoi, Jakarta 
#From:help845,DST Start and DST End 
help845,DST开始和DST结束
#From:wt.p.3,This page will refresh shortly. 
wt.p.3,此页面将立刻刷新。
#From:up.tz.51,(GMT+06:00) Sri Jayawardenepura 
up.tz.51,(GMT+06:00) Sri Jayawardenepura 
#From:wprn.s3d,Alternatively, you can direct the setup executable to a folder on your computer containing a printer driver you have downloaded from the printer manufacturer's web site. 
wprn.s3d,或者，您可以直接从含有从打印机制造商web站点上下载的打印机驱动程序的文件夹里安装执行。
#From:IPPPPCHAP_AUTH_FAIL,CHAP authentication failed - please check login details. 
IPPPPCHAP_AUTH_FAIL,CHAP认证失败－请检查登录详细。
#From:gw.gm.52,Tiberian Sun 
gw.gm.52,Tiberian Sun 
#From:IPNAT_TCP_BAD_FLAGS,Blocked TCP packet from %v:%u to %v:%u as control %s in not valid 
IPNAT_TCP_BAD_FLAGS,禁止TCP数据包从%v:%u到%v:%u 当控制%s无效时
#From:.name,Name 
.name,名称
#From:help66,Enter the local network IP address of the system hosting the server, for example <code>192.168.0.50</code>. 
help66,输入服务器系统的本地网络IP地址，如<code>192.168.0.50</code>。
#From:IPNAT_UDP_BLOCKED_INGRESS_ICMP_ERROR_PACKET,Blocked incoming ICMP error message (ICMP type %u) from %v to %v as there is no UDP session active between %v:%u and %v:%u 
IPNAT_UDP_BLOCKED_INGRESS_ICMP_ERROR_PACKET,禁止进入ICMP错误信息（ICMP类型%u）从%v到%v，当在%v:%u和%v:%u之间无UDP会话激活时。
#From:IPFTPALG_REJECTED_PACKET,FTP ALG rejected packet from %v:%u to %v:%u 
IPFTPALG_REJECTED_PACKET,FTP ALG拒绝数据包从%v:%u到%v:%u
#From:fb.p.1,Access to this Web site is not allowed from this computer. 
fb.p.1,不允许此计算机访问此web站点
#From:.contype,Connection Type 
.contype,连接类型
#From:help829,The port that you will use to address the management interface from the Internet. For example, if you specify port 1080 here, then, to access the router from the Internet, you would use a URL of the form: <code>http://my.domain.com:1080/</code>. 
help829,您指定因特网访问管理接口的端口。如，如果你指定端口1080，那从因特网访问路由器，您要使用此格式的URL：<code>http://my.domain.com:1080/</code>。
#From:.specappsr,Application Rules 
.specappsr,应用规则
#From:help353,The Invisible option allows you to hide your wireless network. When this option is set to Visible, your wireless network name is broadcast to anyone within the range of your signal. If you're not using encryption then they could connect to your network. When Invisible mode is enabled, you must enter the Wireless Network Name (SSID) on the client manually to connect to the network. 
help353,不可见选项允许您隐藏您的无线网络。此项为可见时，您的无线网络名称被广播到您的信号范围内的每个人。如果您没有使用加密，他们就可以连接到您的网络。启用不可见时，您必须在客户端手动输入无线网络名称（SSID）才可以连接到网络。
#From:gw.gm.23,Halo: Combat Evolved 
gw.gm.23,Halo: Combat Evolved 
#From:help325,Always Broadcast 
help325,总是广播
#From:bwn.RM,Reconnect Mode 
bwn.RM,重新连接模式
#From:sl.LogOps,Log Options 
sl.LogOps,日志选项
#From:help772,All of your Internet and network connection details are displayed on the Device Info page. The firmware version is also displayed here. 
help772,所有您的因特网和网络连接细节都显示在设备信息页面。此页面同时显示固件版本。
#From:.aa.method,Method 
.aa.method,方式
#From:sl.LogDet,Log Details 
sl.LogDet,详细日志
#From:help788,This is a relative measure of signal quality. The value is expressed as a percentage of theoretical best quality. Signal quality can be reduced by distance, by interference from other radio-frequency sources (such as cordless telephones or neighboring wireless networks), and by obstacles between the router and the wireless device. 
help788,这是一个相对的信号质量值。此值表现为一个理论最好质量的百分数。信号质量可能被如距离，其它无线频率源的干扰（如无绳电话或隔壁的无线网络）和路由器和无线设备间的障碍所降低。
#From:.continue,Continue 
.continue,继续
#From:help349,The wireless section is used to configure the wireless settings for your D-Link router. Note that changes made in this section may also need to be duplicated on wireless clients that you want to connect to your wireless network. 
help349,无线部分用来为您的D-Link路由器配置无线设置。注意在此节中所作的修改应该同时复制到连接到您的无线网络的无线客户端上。
#From:help804,The Statistics page displays all of the LAN, WAN, and Wireless packet transmit and receive statistics. 
help804,统计页面显示所有LAN，WAN和无线数据包传输和接收的统计数据。
#From:.devinfo,Device Info 
.devinfo,设备信息
#From:.yes,Yes 
.yes,是
#From:help699,SSID 
help699,SSID
#From:up.tz.62,(GMT+09:00) Yakutsk 
up.tz.62,(GMT+09:00) Yakutsk 
#From:help192,In this section you can add entries to the Schedule Rules List below or edit existing entries. 
help192,此节中，您可以添加条目到下面的计划表规则列表中或者编辑已有的条目。
#From:af.ED,Enable DMZ 
af.ED,允许DMZ
#From:gw.gm.31,Need for Speed 
gw.gm.31,需要速度
#From:help271,A connection to the Internet is always maintained. 
help271,总是保持一个到因特网的连接。
#From:help33,Allows multiple machines on the LAN to connect to their corporate networks using PPTP protocol. 
help33,允许LAN上多个机器使用PPTP协议连接到他们的协同网络。
#From:IPNAT_TCP_BLOCKED_INGRESS_BAD_ACK,Blocked incoming TCP packet from %v:%u to %v:%u with unexpected acknowledgement %lu (expected %lu to %lu) 
IPNAT_TCP_BLOCKED_INGRESS_BAD_ACK,禁止从%v:%u到%v:%u且有意外确认%lu (期望 %lu到%lu)的进入TCP数据包 
#From:htsc.pingt.p,Start pinging the specified host. 
htsc.pingt.p,开始ping特定主机。
#From:tf.CKN,Check Now 
tf.CKN,立刻检查
#From:wprn.cps,Check Printer Status 
wprn.cps,检查打印机状态
#From:up.tz.45,(GMT+05:00) Ekaterinburg 
up.tz.45,(GMT+05:00) Ekaterinburg 
#From:help84,By default, the router automatically determines whether the underlying connection is an xDSL/Frame-relay network or some other connection type (such as cable modem or Ethernet), and it displays the result as <span class="option">Detected xDSL or Frame Relay Network</span>. If you have an unusual network connection in which you are actually connected via xDSL but for which you configure either "Static" or "DHCP" in the WAN settings, setting this option to <span class="option"> xDSL or Other Frame Relay Network</span> ensures that the router will recognize that it needs to shape traffic slightly differently in order to give the best performance. Choosing <span class="option">xDSL or Other Frame Relay Network</span> causes the measured uplink speed to be reported slightly lower than before on such connections, but gives much better results. 
help84,缺省下，路由器自动决定优先连接为一个Xdsl/帧中继网络或一些其它连接类型（如线缆调制解调器或以太网），它显示结果为<span class="option">Detected xDSL or Frame Relay Network</span>。如果您使用的使一个不常用的网络连接，但实际上通过xDSL连接，但是您在WAN设置里配置为“静态”或“DHCP”，设置此选项为<span class="option"> xDSL or Other Frame Relay Network</span> ，确保路由器会识别它并使流量稍微不同以便获得更好的性能。选择 <span class="option">xDSL or Other Frame Relay Network</span>使测量的上行报告速度比此连接以前稍低，但是给予更好的结果。
#From:GW_FW_NOTIFY_FIRMWARE_AVAIL,Latest firmware version %d.%02d is available 
GW_FW_NOTIFY_FIRMWARE_AVAIL,最新固件版本%d.%02d可用
#From:ss.RXPD,RX Packets Dropped 
ss.RXPD,丢弃RX数据包
#From:WEB_FILTER_LOG_URL_BLOCKED_MAC,Web site %S blocked for %s 
WEB_FILTER_LOG_URL_BLOCKED_MAC,Web 站点%S阻止%s 
#From:IPPORTTRIGGERALG_TCP_PACKET_ALLOC_FAILURE,Port trigger ALG failed to allocate session for TCP packet from %v:%u to %v:%u 
IPPORTTRIGGERALG_TCP_PACKET_ALLOC_FAILURE,端口触发ALG为TCP数据包从%v:%u到%v:%u分配会话失败
#From:dlink.1.bw1.schld.help,When Wireless is enabled, the default selection for scheduling is "Always". Selections for other schedules will be available in the drop down menu after users define schedules in the "Schedule" page. This function gets disabled when wireless is disabled. 
dlink.1.bw1.schld.help,启用无线时，计划表的默认选择是“总是”。用户在“计划表”页面中定义了计划后，在下来菜单中可以选择其他可用的计划。此功能在无线禁止时也禁止。
#From:wwa.note.hostname,Note: You may also need to provide a Host Name. If you do not have or know this information, please contact your ISP. 
wwa.note.hostname,注意：您可能需要提供一个主机名。如果您没有或不知道此信息，请联系您的ISP。
#From:ai.Action,Action 
ai.Action,动作
#From:RUNTIME_CONFIG_RESET_CONFIG_TO_FACTORY_DEFAULTS,Reset configuration to factory defaults 
RUNTIME_CONFIG_RESET_CONFIG_TO_FACTORY_DEFAULTS,复位配置到出厂默认值
#From:sps.nopr,No printer detected 
sps.nopr,没有检测到打印机
#From:gw.hours,Hours 
gw.hours,小时
#From:.Fri,Fri 
.Fri,星期五
#From:tps.lpd,LPD/LPR Printing 
tps.lpd,LPD/LPR打印 
#From:tf.FWUg,Firmware Upgrade 
tf.FWUg,固件升级
#From:anet.wp.0,10Mbps 
anet.wp.0,10Mbps 
#From:gw.gm.4,Battlefield 1942 
gw.gm.4,战场1942
#From:help373,Both of these options select some variant of Wi-Fi Protected Access (WPA) -- security standards published by the Wi-Fi Alliance. The <span class="option">WPA Mode</span> further refines the variant that the router should employ. 
help373,两个这些选项都选择一些wi-Fi保护访问（WPA）变量－由Wi－Fi联盟发布的安全标准。<span class="option">WPA Mode</span>深层次定义了路由器要部署的变量。
#From:tt.dsoffs,Daylight Saving Offset 
tt.dsoffs,夏令时偏移量
#From:wwz.auto.assign.key,Automatically assign a network key (Recommended) 
wwz.auto.assign.key,自动分配一个网络密钥（推荐）
#From:gw.gm.15,Doom 3 
gw.gm.15,Doom 3 
#From:wwl.s3.note.1,For information on which security features your wireless adapters support, please refer to the adapters' documentation. 
wwl.s3.note.1,对于您的无线适配器支持的安全特征，请参见适配器的文档。
#From:hhts.save,Click <strong>Save</strong> to add a completed schedule to the list below. 
hhts.save,点击<strong>Save</strong>来添加一个完整的计划到下面的列表。
#From:at.Auto,Auto-detect 
at.Auto,自动－检测
#From:help194,Place a checkmark in the boxes for the desired days or select the All Week radio button to select all seven days of the week. 
help194,选择需要的日期复选框或者选择所有星期单选按钮来选择一个星期的所有7天。
#From:IPPPPIPCP_PPP_LINK_DOWN,PPP network down 
IPPPPIPCP_PPP_LINK_DOWN,PPPP网络关闭
#From:aa.AT,Address Type 
aa.AT,地址类型
#From:gw.gm.71,Ubi.com 
gw.gm.71,Ubi.com 
#From:aa.wiz.s1.msg3,Step 3 - Select the machine to which this policy applies 
aa.wiz.s1.msg3,步骤3－选择此策略应用的机器
#From:BIGPOND_FAILED,BigPond failed, see log for details 
BIGPOND_FAILED,BigPond失败，详见日志 
#From:help898,The time between periodic updates to the Dynamic DNS, if your dynamic IP address has not changed. The timeout period is entered in hours. 
help898,定期升级和动态DNS之间的时间，如果您的动态IP地址没有改变。过期时间周期为小时。
#From:bwn.PPTPSIPA,PPTP Server IP Address 
bwn.PPTPSIPA,PPTP服务器IP地址
#From:.routing,Routing 
.routing,路由
#From:hham.intro,Create a list of MAC addresses that you would either like to allow or deny access to your network. 
hham.intro,创建您允许或禁止访问您的网络的MAC地址列表。
#From:WIFISC_IR_REGISTRATION_FAIL_3,WPS Internal Registrar did not receive request from any wireless station in 2 minutes and stopped. 
WIFISC_IR_REGISTRATION_FAIL_3,WPS内部注册在2分钟内没有接收到任何无线站请求，停止。
#From:ai.intro.1,The Inbound Filter option is an advanced method of controlling data received from the Internet. With this feature you can configure inbound data filtering rules that control data based on an IP address range. 
ai.intro.1,入站过滤器选项是控制从因特网接收到的数据的高级方式。有了此特征，您可以基于IP地址范围控制数据来配置入站数据过滤规则。
#From:wwa.title.s2,Step 2: Select your Time Zone 
wwa.title.s2,步骤2：选择您的时区
#From:up.tz.69,(GMT+10:00) Vladivostok 
up.tz.69,(GMT+10:00) Vladivostok 
#From:IPMSCHAP_AUTH_RESULT,MSCHAP sent authentication response to peer. 
IPMSCHAP_AUTH_RESULT,MSCHAP发送认证响应到接收端。
#From:tss.intro2,The current system settings can be saved as a file onto the local hard drive. The saved file or any other saved setting file created by device can be uploaded into the unit. 
tss.intro2,当前系统设置可以保存为一个文件到本地硬盘。保存的文件或其它设备创建的保存设置文件可以上传到设备。
#From:help354,If you select this option, the router automatically finds the channel with least interference and uses that channel for wireless networking. If you disable this option, the router uses the channel that you specify with the following <span class="option">Wireless Channel</span> option. 
help354,如果您选择此项，路由器为无线网络自动寻找最少干扰的信道。如果您禁止此选项，路由器使用您在下面<span class="option">Wireless Channel</span>选项中指定的信道。
#From:up.tz.19,(GMT-03:00) Buenos Aires, Georgetown 
up.tz.19,(GMT-03:00) Buenos Aires, Georgetown 
#From:ta.alert.5,You must enter the name of a configuration file first. 
ta.alert.5,您必须首先输入一个配置文件的名称。
#From:bd.DAB,Always broadcast 
bd.DAB,总是广播
#From:.WPAenterprise,WPA-Enterprise 
.WPAenterprise,WPA－企业
#From:GW_INET_ACCESS_DROP_ACCESS_CONTROL_MAC,Internet access control dropped packet from %v:%u[%s] to %v:%u (protocol %u) 
GW_INET_ACCESS_DROP_ACCESS_CONTROL_MAC,因特网访问控制丢弃数据包从 %v:%u[%s]到%v:%u (协议%u)
#From:sps.pr,Printer 
sps.pr,打印机
#From:up.tz.34,(GMT+02:00) Harare, Pretoria 
up.tz.34,(GMT+02:00) Harare, Pretoria 
#From:.psk,Pre-Shared Key 
.psk,预共享密钥
#From:.dyndns,Dynamic DNS 
.dyndns,动态DNS
#From:.deny,Deny 
.deny,拒绝
#From:IPNAT_TCP_BLOCKED_INGRESS_UNEXP_FLAGS,Blocked incoming TCP packet from %v:%u to %v:%u as %s is not allowed in state %s 
IPNAT_TCP_BLOCKED_INGRESS_UNEXP_FLAGS,禁止进入TCP数据包从%v:%u到%v:%u 当%s在状态%s中为不允许时
#From:help276,Maximum Idle Time: 
help276,最大空闲时间：
#From:.to,to 
.to,到
#From:aa.AT.0,IP 
aa.AT.0,IP
#From:dlink.hhwf.intro,Create a list of Web Sites to which you would like to deny or allow through the network. 
dlink.hhwf.intro,创建您允许或禁止通过网络的web站点列表。
#From:tt.Dec,Dec 
tt.Dec,十二月
#From:help879,Click the <span class="button_ref">B">Browse</span> button to locate the D-Link upgrade file on your computer. 
help879,单击<span class="button_ref">B">BrowseBrowse</span> 按钮来定位您计算机上的D-Link升级文件。 
#From:GW_INET_ACCESS_POLICY_START_OTHERS,Policy %s started; Internet access for all non-specified systems changed to: %s 
GW_INET_ACCESS_POLICY_START_OTHERS,策略%s启用;因特网访问所有非特定系统改变为：%s 
#From:up.tz.72,(GMT+12:00) Fiji, Kamchatka, Marshall Is. 
up.tz.72,(GMT+12:00) Fiji, Kamchatka, Marshall Is. 
#From:tsc.pingt.msg11,No response from host, retrying... 
tsc.pingt.msg11,主机没有响应，重试…
#From:up.ae.de.1,Are you sure you want to delete this entry? 
up.ae.de.1,您确定要删除此项？
#From:help781,This area of the screen continually updates to show all DHCP enabled computers and devices connected to the LAN side of your router. The detection "range" is limited to the address range as configured in DHCP Server. Computers that have an address outside of this range will not show. If the DHCP Client (i.e. a computer configured to "Automatically obtain an address") supplies a Host Name then that will also be shown. Any computer or device that has a static IP address that lies within the detection "range" may show, however its host name will not. 
help781,屏幕的此区域不断更新显示连接到您路由器LAN侧的所有DCHP允许的计算机和设备。探测“范围”限制配置在DHCP服务器上的地址范围。此范围外地址的计算机不被显示。如果DHCP客户端（如一个配置为“自动获取一个地址”的计算机）提供一个主机名，主机名也将被显示。任何探测“范围”内但是拥有静态IP地址的计算机或设备也被显示，但是它们的主机名不被显示。
#From:help161.2,Enter the MAC address of the desired. 
help161.2,输入需要的MAC地址
#From:tt.time.19,6 pm 
tt.time.19,6 pm
#From:am.intro,Configure MAC Filtering below: 
am.intro,配置以下MAC过滤：
#From:help811,The number of transmission failures that cause loss of a packet. 
help811,造成数据包丢失的传输失败数。
#From:aw.TP.1,Medium 
aw.TP.1,中级
#From:up.tz.24,(GMT) Casablanca, Monrovia 
up.tz.24,(GMT) Casablanca, Monrovia 
#From:IPMSCHAP_AUTH_SENT,MSCHAP authentication details were sent to authenticator. 
IPMSCHAP_AUTH_SENT,MSCHAP认证详细已发送到认证者。
#From:sw.intro,Use this option to view the wireless clients that are connected to your wireless router. 
sw.intro,使用此选项查看连接到您的无线路由器的无线客户端。
#From:tps.lpd1,The LPD/LPR printing protocol uses a fixed IP address and queue name to communicate with your printer. 
tps.lpd1,LPD/LPR打印协议使用一个固定的IP地址和队列名称来和您的打印机通信。
#From:help257,and 
help257,和
#From:.upgintro,The router will now be reprogrammed using the uploaded firmware file. Please wait <span id="timeleft"></span>&nbsp;seconds for this process to complete, after which you may access these web pages again. Pressing reload or back on your browser may cause this operation to fail. 
.upgintro,路由器将使用上传的固件文件重新加载。请等待<span id="timeleft"></span>&nbsp; 秒完成此进程，然后您可以再次访问web页面。按下重新加载或您浏览器上的退后按钮将造成此操作失败。
#From:help819.8,Closed -- The connection is no longer active but the session is being tracked in case there are any retransmitted packets still pending. 
help819.8,关闭－连接不再活动，为以防有任何重新传输的数据包仍未传送，仍追踪会话。
#From:bws.secs,(seconds) 
bws.secs,（秒）
#From:IPNAT_ICMP_BLOCKED_EGRESS_PACKET,Blocked outgoing ICMP packet (ICMP type %u) from %v to %v 
IPNAT_ICMP_BLOCKED_EGRESS_PACKET,禁止外出ICMP数据包（ICMP类型%u）从%v 到%v
#From:PORT_FORWARDING,Port Forwarding 
PORT_FORWARDING,端口转发
#From:bwn.Mode.DHCP,Dynamic IP (DHCP) 
bwn.Mode.DHCP,动态IP(DHCP）
#From:tt.Hour,Hour 
tt.Hour,小时
#From:help290a,Enter the IP addresses of the DNS Servers. Leave the field for the secondary server empty if not used. 
help290a,输入DNS服务器的IP地址。如果不使用备用服务器，那字段为空。
#From:BIGPOND_LOGGING_OUT,BigPond logging out 
BIGPOND_LOGGING_OUT,BigPond退出
#From:af.intro.1,The DMZ (Demilitarized Zone) option lets you set a single computer on your network outside of the router. If you have a computer that cannot run Internet applications successfully from behind the router, then you can place the computer into the DMZ for unrestricted Internet access. 
af.intro.1,DMZ（隔离区）选项可以让您设置一台计算机在您的网络路由器的外面。如果您的计算机不能在路由器内成功运行因特网应用，您可以把计算机放置到DMZ，可以获得不受限制的因特网访问。
#From:hhan.mc,If you are having trouble receiving multicast streams from the Internet, make sure the Multicast Streams option is enabled. 
hhan.mc,如果您在从因特网接收多播流时遇到麻烦，确保多播流选项被选择。
#From:.dns1,Primary DNS Server 
.dns1,首选DNS服务器
#From:.tools,Tools 
.tools,工具
#From:.sdi.s2,Disconnected 
.sdi.s2,断开
#From:sps.usbport,USB Port 
sps.usbport,USB端口
#From:GW_SCHED_ALLOC_FAILED,System error occured when allocating schedule %s 
GW_SCHED_ALLOC_FAILED,分配计划 %s时系统发生错误
#From:help179,Prevent all WAN users from accessing the related capability. (LAN users are not affected by Inbound Filter Rules.) 
help179,阻止所有WAN用户的访问相关联的能力。（LAN用户由于进入过滤器规则，不受影响。）
#From:tt.dsen2,Enable Daylight Saving 
tt.dsen2,允许夏令时
#From:.allow,Allow 
.allow,允许
#From:help798,Select the level of events that you want to view. 
help798,选择您要查看的事件等级。
#From:tt.Oct,Oct 
tt.Oct,十月
#From:anet.wan.phyrate,WAN Port Speed 
anet.wan.phyrate,WAN端口速度
#From:.note,Note 
.note,提示
#From:aa.FPR.c6,Dest<br />Port<br />Start 
aa.FPR.c6,目的<br />Port<br />Start 
#From:help69,UDP Ports To Open 
help69,打开UDP端口
#From:bd.DLT,DHCP Lease Time 
bd.DLT,DHCP租用时间
#From:wwa.title.wel,Welcome to the D-Link Internet Connection Setup Wizard 
wwa.title.wel,欢迎使用D-Link因特网连接安装向导
#From:ai.title.IFRL,Inbound Filter Rules List 
ai.title.IFRL,进入过滤器规则列表
#From:GW_LAN_INTERFACE_UP,LAN interface is up 
GW_LAN_INTERFACE_UP,LAN接口启用
#From:.logs,Logs 
.logs,日志
#From:am.FM.2,Turn MAC Filtering OFF 
am.FM.2,关闭MAC过滤
#From:GW_LOG_EMAIL_ON_USER_REQUEST,Sending log email after administrator request 
GW_LOG_EMAIL_ON_USER_REQUEST,在管理员要求后发送日志邮件
#From:help21,The port that will be accessed from the Internet. 
help21,从因特网访问的端口
#From:bwl.Mode,802.11 Mode 
bwl.Mode,802.11模式
#From:dlink.help145,Enter the URL (address) of the Web Site that you want to allow or deny; for example: <code>google.com</code>. Do not enter the <code>http://</code> preceding the URL. Enter the most inclusive domain; for example, select allow and enter <code>dlink.com</code> and access will be permitted to both <code>www.dlink.com</code> and <code>support.dlink.com</code>. 
dlink.help145,输入您要允许或禁止的web站点的URL（地址）。如：<code>google.com</code>。不要在URL前输入<code>http://</code>。输入顶级唯一域名；如，选择允许并输入<code>dlink.com</code>，将允许到<code>www.dlink.com</code>和 <code>support.dlink.com</code>的访问。
#From:bwn.AM,Address Mode 
bwn.AM,地址模式
#From:bwn.BPS,BigPond Server 
bwn.BPS,BigPond服务器
#From:.ispinfo,Enter the information provided by your Internet Service Provider (ISP). 
.ispinfo,输入您的因特网服务供应商（ISP）提供的信息。
#From:.rate,Rate 
.rate,速率
#From:help321,Your D-Link router, by default, has a static IP address of 192.168.0.1. This means that addresses 192.168.0.2 to 192.168.0.254 can be made available for allocation by the DHCP Server. 
help321,您的D-Link路由器，缺省下，静态地址为192.168.0.1。意味着DHCP服务器可以分配192.168.0.2到192.168.0.254之间的地址。
#From:up.tz.06,(GMT-07:00) Mountain Time (US/Canada) 
up.tz.06,(GMT-07:00) Mountain Time (US/Canada) 
#From:.success,Success 
.success,成功
#From:.bsecure.parental.serv,Sentinel Parental Controls Service 
.bsecure.parental.serv,哨兵父母控制服务
#From:wwa.set.l2tp.title,Set Username and Password Connection (L2TP) 
wwa.set.l2tp.title,设置用户名和密码连接（L2TP）
#From:wwz.wwl.title.s3,Step 1: Welcome TO THE D-LINK WIRELESS SECURITY SETUP WIZARD 
wwz.wwl.title.s3,步骤1：欢迎使用D-L年无线安全设置向导
#From:help342,Mac OS X 
help342,Mac OS X 
#From:help265,Select this option if your ISP requires you to use a PPPoE (Point to Point Protocol over Ethernet) connection. DSL providers typically use this option. This method of connection requires you to enter a <span class="option">Username</span> and <span class="option">Password</span> (provided by your Internet Service Provider) to gain access to the Internet. 
help265,如果您的ISP要求您使用一个PPPoE（以太网上的点对点协议）连接，选择此项。DSL供应商一般使用此项。此连接方式要求您输入一个<span class="option">用户名</span>和 <span class="option">密码</span>（由您的因特网服务供应商提供）来访问因特网。
#From:GW_SMTP_EMAIL_RESOLVED_DNS,SMTP (Email) server %s is at IP address %v 
GW_SMTP_EMAIL_RESOLVED_DNS,SMTP (Email) 服务器%s的IP地址为%v 
#From:tsc.pingt.msg101,Pings received: 
tsc.pingt.msg101,Ping接收：
#From:bws.RSP,RADIUS server Port 
bws.RSP,RADIUS服务器端口
#From:PPPOE_EVENT_CONNECT,Trying to establish a PPPoE connection 
PPPOE_EVENT_CONNECT,尝试建立一个PPPoE连接
#From:tt.auto,Automatic Time Configuration 
tt.auto,自动时间配置
#From:PPTP_EVENT_LOW_RESOURCES_TO_QUEUE,The PPTP subsystem is low on resources. Connectivity may be affected. 
PPTP_EVENT_LOW_RESOURCES_TO_QUEUE,PPTP子系统资源低。连接受影响。
#From:IPL2TP_TUNNEL_UNEXPECTED_MESSAGE,L2TP local tunnel 0x%04X received unexpected control message (ignored) 
IPL2TP_TUNNEL_UNEXPECTED_MESSAGE,L2TP本地通道 0x%04X接收到意外控制信息（忽略）。
#From:gw.gm.34,Neverwinter Nights 
gw.gm.34,Neverwinter Nights 
#From:tt.week.5,5th 
tt.week.5,第五
#From:wwl.intro.end,Below is a detailed summary of your wireless security settings. Please print this page out, or write the information on a piece of paper, so you can configure the correct settings on your wireless client adapters. 
wwl.intro.end,下面是您的无线安全设置的详细总结。请打印此页或在纸上记下此信息，这样您可以正确配置您的无线客户端适配器。
#From:aa.Policy.Table,Policy Table 
aa.Policy.Table,策略表
#From:tt.TimeConf,Time Configuration 
tt.TimeConf,时间配置
#From:.none,None 
.none,无
#From:.aa.wiz.s3.title,Step 2: Select Schedule 
.aa.wiz.s3.title,步骤2：选择计划表
#From:help392,A pass-phrase that must match with the authentication server. 
help392,和认证服务器匹配的密码短语
#From:GW_LOG_EMAIL_ON_SCHEDULE,Sending log email on schedule 
GW_LOG_EMAIL_ON_SCHEDULE,按计划发送日志邮件
#From:wwa.intro.s2,Select the appropriate time zone for your location. This information is required to configure the time-based options for the router. 
wwa.intro.s2,为您的位置选择相应的时区。为路由器配置基于时间选项时要求此信息。
#From:.PPTPgw,PPTP Gateway IP Address 
.PPTPgw,PPTP网关IP地址
#From:WEB_FILTER_LOG_URL_ACCESSED,Web site %S accessed from %v 
WEB_FILTER_LOG_URL_ACCESSED,Web 站点%S访问从%v
#From:IPMMSALG_REJECTED_PACKET,MMS ALG rejected packet from %v:%u to %v:%u 
IPMMSALG_REJECTED_PACKET,MMS ALG拒绝数据包从%v:%u到%v:%u 
#From:.wirelesst,Wireless Settings 
.wirelesst,无线设置
#From:int.intro,There are two ways to set up your Internet connection: you can use the Web-based Internet Connection Setup Wizard, or you can manually configure the connection. 
int.intro,有两种方式设置您的因特网连接：您可以使用基于web的因特网连接安装向导，或您可以手动配置连接。
#From:GW_LAN_ACCESS_DENIED,Access denied to LAN system with MAC address %m 
GW_LAN_ACCESS_DENIED,访问拒绝MAC地址为 %m的LAN系统
#From:gw.gm.26,Jedi Knight II: Jedi Outcast 
gw.gm.26,Jedi Knight II: Jedi Outcast 
#From:PPTP_ALG_GRE_BLOCKED_INGRESS,Blocked incoming GRE packet from %v to %v 
PPTP_ALG_GRE_BLOCKED_INGRESS,阻止进入GRE数据包从%v到%v
#From:up.tz.30,(GMT+01:00) West Central Africa 
up.tz.30,(GMT+01:00) West Central Africa 
#From:gw.gm.49,Starcraft 
gw.gm.49,Starcraft 
#From:.sched,Schedule 
.sched,计划表
#From:IPFAT_MOUNT_FAILED,Failed to mount FAT device 
IPFAT_MOUNT_FAILED,加载FAT设备失败
#From:gw.gm.75,KALI 
gw.gm.75,KALI 
#From:help883,Here are displayed the version numbers of the firmware currently installed in your router and the most recent upgrade that is available. 
help883,这里显示当前安装在您的路由器上的固件的版本号和最新可用的升级。
#From:ta.alert.6,Please wait, uploading configuration file 
ta.alert.6,请等待，正在上传配置文件
#From:GW_INET_ACCESS_POLICY_START_IP,Policy %s started; Internet access for IP address %v changed to: %s 
GW_INET_ACCESS_POLICY_START_IP,策略%s启用;因特网访问IP地址%v改变为: %s 
#From:help841a,Displays the time currently maintained by the router. If this is not correct, use the following options to configure the time correctly. 
help841a,显示路由器的当前时间。如果不正确，使用以下选项来正确配置时间。
#From:tt.time.23,10 pm 
tt.time.23,10 pm
#From:ag.title.4,Port Forwarding Rules 
ag.title.4,端口转发规则
#From:gw.gm.68,WinMX 
gw.gm.68,WinMX 
#From:IPNAT_TCP_BLOCKED_EGRESS_UNEXP_FLAGS,Blocked outgoing TCP packet from %v:%u to %v:%u as %s is not allowed in state %s 
IPNAT_TCP_BLOCKED_EGRESS_UNEXP_FLAGS,外出TCP数据包从%v:%u到%v:%u 当%s在状态%s里为不允许时
#From:help260,Host Name: 
help260,主机名：
#From:help819.4,FIN Wait -- The client system has requested that the connection be stopped. 
help819.4,FIN等待－客户系统要求连接停止。
#From:help357,If all of the wireless devices you want to connect with this router can connect in the same transmission mode, you can improve performance slightly by choosing the appropriate "Only" mode. If you have some devices that use a different transmission mode, choose the appropriate "Mixed" mode. 
help357,如果您要连接到路由器的所有无线设备都可以使用同一个传输模式连接，您可以选择适当的“仅”模式来稍微提高性能。如果您的一些设备使用不同的传输模式，选择适当的“混合”模式。
#From:.TCP,TCP 
.TCP,TCP
#From:IPMSCHAP_CHALLENGE_RECVD,MSCHAP authentication challenge received from peer. 
IPMSCHAP_CHALLENGE_RECVD,MSCHAP认证挑战从对等端接收到的。
#From:anet.msg.upnp,Universal Plug and Play (UPnP) supports peer-to-peer Plug and Play functionality for network devices. 
anet.msg.upnp,通用即插即用（UPnP）支持网络设备的对等即插即用功能。
#From:help776,Clicking the <span class="button_ref">DHCP Release</span> button unassigns the router's IP address. The router will not respond to IP messages from the WAN side until you click the <span class="button_ref">DHCP Renew</span> button or power-up the router again. Clicking the <span class="button_ref">DHCP Renew</span> button causes the router to request a new IP address from the ISP's server. 
help776,单击<span class="button_ref">DHCP Release</span>按钮取消分配路由器的IP地址。直到您单击<span class="button_ref">DHCP Renew</span>按钮或重启路由器，路由器才响应WAN侧的IP信息。单击<span class="button_ref">DHCP Renew</span>按钮，路由器要求从ISP服务器获得一个新的IP地址。
#From:tt.alert.1only,Please select one of Automatic or Manual Time setting. Not both 
tt.alert.1only,请选择自动或手动时间设置。或者两个都不选
#From:help32,Here you can enable or disable ALGs. Some protocols and applications require special handling of the IP payload to make them work with network address translation (NAT). Each ALG provides special handling for a specific protocol or application. A number of ALGs for common applications are enabled by default. 
help32,这里您可以允许或禁止ALG。一些协议和应用程序要求特殊处理IP有效负荷来使它们和网络地址转换（NAT）一起工作。每个ALG为一个特定协议或应用程序提供特殊处理。缺省下，启用一系列普通应用程序的ALG。
#From:gw.gm.3,Asheron's Call 
gw.gm.3,Asheron's Call 
#From:help823,The number of seconds of idle time until the router considers the session terminated. 
help823,路由器考虑会话终止的空闲时间秒数。
#From:.L2TPip,L2TP IP Address 
.L2TPip,L2TP IP地址 
#From:.reboot,Reboot the Device 
.reboot,重启设备
#From:wps.p3.1,There are two ways to add wireless device to your wireless network: 
wps.p3.1,有两种方式添加无线设备到您的无线网络：
#From:wprn.intro5,Step 3: Insert the printer driver CD if requested 
wprn.intro5,步骤3：如果要求，插入打印机驱动CD
#From:.bsecure.security.serv,Sentinel Security Services 
.bsecure.security.serv,哨兵安全服务
#From:tsc.pingt.msg8,received in 
tsc.pingt.msg8,接收进
#From:gw.gm.56,Unreal Tournament 
gw.gm.56,Unreal Tournament 
#From:help286,Typically L2TP connections are not always on. The D-Link router allows you to set the reconnection mode. The settings are: 
help286,典型的L2TP连接不总是启用。D-Link路由器允许您设置重新连接模式。设置为：
#From:tf.intro.FWU,The Firmware Upgrade section can be used to update to the latest firmware code to improve functionality and performance. 
tf.intro.FWU,固件升级部分用来升级到最新的固件代码以改进功能和性能。
#From:up.tz.57,(GMT+08:00) Kuala Lumpur, Singapore 
up.tz.57,(GMT+08:00) Kuala Lumpur, Singapore 
#From:GW_FW_NOTIFY_RESOLVED_DNS,Firmware upgrade server %s is at IP address %v 
GW_FW_NOTIFY_RESOLVED_DNS,固件升级服务器 %sIP地址为%v
#From:af.EFT.2,Port And Address Restricted 
af.EFT.2,端口和地址限制
#From:up.tz.00,(GMT-12:00) Eniwetok, Kwajalein 
up.tz.00,(GMT-12:00) Eniwetok, Kwajalein 
#From:hhts.intro,Schedules are used with a number of other features to define when those features are in effect. 
hhts.intro,当和计划表一起使用的一系列特征有效时，计划表用于和这些特征定义。
#From:.auth,Authentication 
.auth,认证
#From:IPL2TP_TUNNEL_DISCONNECTING,L2TP local tunnel 0x%04X is disconnecting 
IPL2TP_TUNNEL_DISCONNECTING,L2TP本地通道 0x%04X断开。
#From:NET_RTC_SYNCHRONIZATION_FAILED_AFTER_RETRIES,Time synchronization failed after retries ... giving up 
NET_RTC_SYNCHRONIZATION_FAILED_AFTER_RETRIES,时间同步重试失败…放弃
#From:sd.FWV,Firmware Version 
sd.FWV,固件版本
#From:tsc.SchRuLs,Schedule Rules List 
tsc.SchRuLs,计划规则列表
#From:help188.wmm,Enabling WMM can help control latency and jitter when transmitting multimedia content over a wireless connection. 
help188.wmm,当在无线连接上传输媒体内容时，启用WMM可以帮助控制延迟和抖动。
#From:help396,Optional Backup RADIUS Server 
help396,可选备用RADIUS服务器
#From:ta.SavConf,Save Configuration 
ta.SavConf,保存配置
#From:wwa.sdns,Secondary DNS Address 
wwa.sdns,备用DNS地址
#From:help876,This option restores all configuration settings back to the settings that were in effect at the time the router was shipped from the factory. Any settings that have not been saved will be lost. If you want to save your router configuration settings, use the Save Settings option above. 
help876,此项恢复所有的配置设置到路由器出厂设置。任何没有保存的设置都将丢失。如果您要保存路由器的配置设置，使用上面的保存设置选项。
#From:help380,This option uses Wi-Fi Protected Access with a Pre-Shared Key (PSK). 
help380,此项使用带一个预共享密钥（PSK）的Wi-Fi保护访问。
#From:.netfilt,Network Filter 
.netfilt,网络过滤器
#From:gw.days,Days 
gw.days,日期
#From:li.Login,Login 
li.Login,登录
#From:WAN_ALREADY_CONNECTED,WAN is already connected 
WAN_ALREADY_CONNECTED,WAN已连接
#From:bws.WPAM.3,WPA2 Only 
bws.WPAM.3,只WPA2
#From:GW_ROUTES_GATEWAY_IP_ADDRESS_CONFLICTS,Gateway address %v must not be the address of the intended interface 
GW_ROUTES_GATEWAY_IP_ADDRESS_CONFLICTS,网关地址%v必须不是目的接口的地址
#From:td.PWK,Password or Key 
td.PWK,密码或密钥
#From:tool.admin.vsname,Virtual Server Item 
tool.admin.vsname,虚拟服务器项目
#From:up.tz.50,(GMT+06:00) Astana, Dhaka 
up.tz.50,(GMT+06:00) Astana, Dhaka 
#From:static_PPPoE,Static IP 
static_PPPoE,静态IP
#From:tsc.StrTime,Start Time 
tsc.StrTime,起始时间
#From:tsc.pingt.msg104,Shortest ping time (in milliseconds): 
tsc.pingt.msg104,最短ping时间（毫秒）：
#From:wprn.iderr,Printer Device ID Error 
wprn.iderr,打印机设备ID错误
#From:wps.KR42,Select this option will display the current wireless settings for you to configure the wireless device manually 
wps.KR42,选择此项将为您显示用来手动配置无线设备的当前无线设置。
#From:td.Timeout,Timeout 
td.Timeout,时间过期
#From:.aa.apply.web.filter,Apply Web Filter 
.aa.apply.web.filter,应用web过滤器
#From:resetUnconfiged,Reset to Unconfigured 
resetUnconfiged,复位到为配置
#From:GAMING,Gaming 
GAMING,Gaming 
#From:tt.time.9,8 am 
tt.time.9,8 am
#From:IPNAT_BLOCKED_INGRESS,Blocked incoming packet from %v to %v (IP protocol %u) 
IPNAT_BLOCKED_INGRESS,禁止进入数据包从 %v到%v (IP协议%u)
#From:GW_WAN_INTERFACE_UP,WAN interface is up. Connection to Internet established with IP Address %v and default gateway %v 
GW_WAN_INTERFACE_UP,WAN接口启用。用IP地址%v和默认网关%v建立到因特网的连接
#From:.ripaddr,Router IP Address 
.ripaddr,路由器IP地址
#From:sa.TimeOut,Time Out 
sa.TimeOut,时间过期
#From:IPNAT_TCP_BLOCKED_EGRESS_BAD_SEQ,Blocked outgoing TCP packet from %v:%u to %v:%u with unexpected sequence %lu (expected %lu to %lu) 
IPNAT_TCP_BLOCKED_EGRESS_BAD_SEQ,禁止从%v:%u到%v:%u且有意外顺序%lu (期望 %lu到%lu)的外出TCP数据包 
#From:GW_LAN_INTERFACE_DOWN,LAN interface is down 
GW_LAN_INTERFACE_DOWN,LAN接口关闭
#From:help778,Depending on whether the WAN connection is currently established, you can click either the <span class="button_ref">Connect</span> to attempt to establish the WAN connection or the <span class="button_ref">Disconnect</span> to break the WAN connection. 
help778,依据WAN连接当前是否建立，您可以单击<span class="button_ref">Connect</span>来尝试建立WAN连接或 <span class="button_ref">Disconnect</span>来断开WAN连接。 
#From:sps.qname,Queue Name 
sps.qname,队列名称
#From:.seconds,seconds 
.seconds,秒
#From:GW_LOGS_CLEARED,Log cleared by IP address %v 
GW_LOGS_CLEARED,用IP地址%v清除日志
#From:sl.Warning,Warning 
sl.Warning,警告
#From:aa.MAC,Machine Address 
aa.MAC,机器地址
#From:wps.KR51,Select this option if your wireless device supports WPS (Wi-Fi Protected Setup) 
wps.KR51,如果您的无线设备支持WPS（Wi－Fi保护设置），请选择此项
#From:help274,Manual: 
help274,手动：
#From:aw.sgi.h1,Using a short (400ns) guard interval can increase throughput. However, it can also increase error rate in some installations, due to increased sensitivity to radio-frequency reflections. 
aw.sgi.h1,使用一个短（400ns）警戒间隔可以增加吞吐量。然而，由于对无线频率反射增加的灵敏度，会造成一些安装增加错误率。
#From:IPSTACK_REJECTED_SOURCE_ROUTED_PACKET,Blocked source-routed packet from %v to %v 
IPSTACK_REJECTED_SOURCE_ROUTED_PACKET,被阻止的从%v到%v的源路由数据包
#From:wwa.pdns,Primary DNS Address 
wwa.pdns,首选DNS地址
#From:help834,Use this option to restore previously saved router configuration settings. 
help834,使用该选项来恢复先前保存的路由器配置设定。
#From:.Sun,Sun 
.Sun,星期天
#From:bd.title.clients,Number of Dynamic DHCP Clients 
bd.title.clients,动态DHCP客户端的数量
#From:wwz.auto.assign.key2,To prevent outsiders from accessing your network, the router will automatically assign a security (also called WEP or WPA key) to your network. 
wwz.auto.assign.key2,为了阻止外部用户访问您的网络，路由器可以自动分配一个安全防护系统（也被成为WEP或WPA密钥）给您的网络。
#From:sw.title.list,Number Of Wireless Clients 
sw.title.list,无限客户端的数量
#From:up.tz.15,(GMT-04:00) Caracas, La Paz 
up.tz.15,(GMT-04:00) 加拉加斯,拉巴斯
#From:help316,Once your D-Link router is properly configured and this option is enabled, the DHCP Server will manage the IP addresses and other network configuration information for computers and other devices connected to your Local Area Network. There is no need for you to do this yourself. 
help316,当您的D-Link路由器被正确的配置好后，该功能就会启动，DHCP服务器将管理IP地址，和其他连接到您的局域网的计算机和其他设备的网络配置信息。这样，您就没必要亲自动手了。
#From:IPL2TP_TUNNEL_CONNECTING,Trying to connect to L2TP server 
IPL2TP_TUNNEL_CONNECTING,尝试链接到L2TP服务器
#From:af.ES,Enable SPI 
af.ES,开启SPI
#From:NET_RTC_SYNCHRONIZED,Time synchronized 
NET_RTC_SYNCHRONIZED,时间同步
#From:up.tz.10,(GMT-06:00) Saskatchewan 
up.tz.10,(GMT-06:00) 萨斯喀彻温 
#From:bwn.RM.1,On demand 
bwn.RM.1,需求
#From:NOT_LOGGED_IN_PLEASE_REFRESH,You are not logged in, please refresh the browser 
NOT_LOGGED_IN_PLEASE_REFRESH,您没有登录，请刷新浏览器
#From:IPSEC_ALG_ESP_BLOCKED_INGRESS,Blocked incoming ESP packet from %v to %v 
IPSEC_ALG_ESP_BLOCKED_INGRESS,被组织的从%v到%v的进入ESP数据包
#From:ub.continue,continue 
ub.continue,继续
#From:td.UNK,Username or Key 
td.UNK,用户名或密钥
#From:IPPMVM_MOUNT_FAILED,Failed to mount PV%d device 
IPPMVM_MOUNT_FAILED,安装PV%d设备失败
#From:gw.gm.42,Rise of Nations 
gw.gm.42,国家的崛起
#From:1066,The LAN address that you want to reserve. 
1066,您想保留的LAN地址
#From:tsc.AllWk,All Week 
tsc.AllWk,每周
#From:.virtserv,Virtual Server 
.virtserv,虚拟服务器
#From:help2,The Virtual Server option gives Internet users access to services on your LAN. This feature is useful for hosting online services such as FTP, Web, or game servers. For each Virtual Server, you define a public port on your router for redirection to an internal LAN IP Address and LAN port. 
help2,虚拟服务器选项让互联网用户可以访问您局域网上的服务。该功能对于在线主机服务，例如FTP，网站或游戏服务器来说是非常重要的。每台虚拟服务器您都可以在您的路由器上定义一个公共端口，用来中转到内部LAN IP地址和端口。
#From:help869,Select this option if you want logs to be sent by email when the log is full. 
help869,选择该选项则在日志存满以后将会以邮件的形式被发送。
#From:IPPPPLCP_SET_LOCAL_OPTIONS,LCP sets local options: ACCM: %lx, ACFC: %u, PFC: %u, MRU: %u 
IPPPPLCP_SET_LOCAL_OPTIONS,LCP设置本地选项：ACCM: %lx, ACFC: %u, PFC: %u, MRU: %u
#From:ts.rd,Reboot The Device 
ts.rd,重启设备
#From:IPSEC_ALG_REJECTED_PACKET,IPSec ALG rejected packet from %v:%u to %v:%u 
IPSEC_ALG_REJECTED_PACKET,IPSec ALG拒绝的从%v:%u到%v:%u的数据包
#From:tsc.pingt.msg3,Please wait, resolving 
tsc.pingt.msg3,正在解析，请等待
#From:GW_WIRELESS_DEVICE_DISCONNECTED,Wireless system with MAC address %m disconnected for reason: %s 
GW_WIRELESS_DEVICE_DISCONNECTED,MAC地址为%m的无线系统断开连接，原因：%s
#From:help333,To input the MAC address of your system, enter it in manually or connect to the D-Link router's Web-Management interface from the system and click the <span class="button_ref">Copy Your PC's MAC Address</span> button. 
help333,要输入您系统的MAC地址，请手动输入，或连接到D-Link路由器的web管理界面然后点击<span class="button_ref">复制计算机的MAC地址</span>按钮。
#From:sd.WRadio,Wireless Radio 
sd.WRadio,无线电波
#From:ALLOWED_WEB_SITES,Allowed, Web Sites - %s%s, Ports - %s 
ALLOWED_WEB_SITES,允许的站点-%s%s，端口-%s
#From:gw.sa.1,BitTorrent 
gw.sa.1,BitTorrent
#From:.UDP,UDP 
.UDP,UDP
#From:help166,Putting a computer in the DMZ may expose that computer to a variety of security risks. Use of this option is only recommended as a last resort. 
help166,将计算机设置为DMZ模式可能会将计算机暴露在各种安全风险中。仅在其他方法无效时推荐使用该选项。
#From:help117,The Access Control section allows you to control access in and out of devices on your network. Use this feature as Parental Controls to only grant access to approved sites, limit web access based on time or dates, and/or block access from applications such as peer-to-peer utilities or games. 
help117,访问控制单元允许您控制网络上进出设备的访问。该功能可作为家长控制，根据时间或日期来限制或组织对某些站点或服务的访问，比如点对点功能或游戏。
#From:bwn.L2TPICT,L2TP Internet Connection Type 
bwn.L2TPICT,L2TP互联网连接类型
#From:help795,The router automatically logs (records) events of possible interest in its internal memory. If there is not enough internal memory for all events, logs of older events are deleted, but logs of the latest events are retained. The Logs option allows you to view the router logs. You can define what types of events you want to view and the level of events to view. This router also has internal Syslog Server support so you can send the log files to a computer on your network that is running a Syslog utility. 
help795,路由器将自动记录其内存中发生的事件。如果没有足够的内存空间来存放所有的时间，则旧的日志事件将会被删除，新的则被保留下来。日志选项允许您浏览路由器日志。您可以定义您希望浏览的事件的类型和等级。该路由器也有其内部的系统日志服务器，所以，您也可以将日志文件发送到网络上另一台运行系统日志功能的计算机上。
#From:.no,No 
.no,否
#From:up.tz.63,(GMT+09:30) Adelaide 
up.tz.63,(GMT+09:30) 阿德莱德 
#From:tf.FWF1,You must enter the name of a firmware file first. 
tf.FWF1,您必须先输入固件名称。
#From:up.tz.65,(GMT+10:00) Brisbane 
up.tz.65,(GMT+10:00) 布里斯班 
#From:.priority,Priority 
.priority,优先级
#From:WAN_ALREADY_DISCONNECTED,WAN is already disconnected 
WAN_ALREADY_DISCONNECTED,WAN已经断开连接
#From:up.jt.1,There is unsaved data on this page. Do you want to abandon it? 
up.jt.1,该页的数据未保存，您要放弃吗？
#From:GW_INET_ACCESS_INITIAL_OTHERS,Internet access for all non-specified systems set to: %s 
GW_INET_ACCESS_INITIAL_OTHERS,所有未指定系统的互联网访问设为：%s
#From:hhai.ip,The starting and ending IP addresses are WAN-side address. 
hhai.ip,起始和结束IP地址是WAN端地址。
#From:as.intro.SA,This option is used to open single or multiple ports on your router when the router senses data sent to the Internet on a "trigger" port or port range. Special Applications rules apply to all computers on your internal network. 
as.intro.SA,该选项在路由器发现有数据通过一个或一系列触发端口发送到互联网时，用于打开您路由器上的一个或多个端口。
#From:anet.wan.ping.1,Pinging public WAN IP addresses is a common method used by hackers to test whether your WAN IP address is valid. 
anet.wan.ping.1,Ping公共WAN IP地址是黑客们常用的测试您的WAN IP是否可用的手段。
#From:up.tz.44,(GMT+04:30) Kabul 
up.tz.44,(GMT+04:30) 喀布尔 
#From:help27,You might have trouble accessing a virtual server using its public identity (WAN-side IP-address of the gateway or its dynamic DNS name) from a machine on the LAN. Your requests may not be looped back or you may be redirected to the "Forbidden" page. 
help27,您通过LAN的一台计算机使用其公共身份（网关的WAN端IP地址或动态DNS）访问虚拟服务器时可能会遇到困难。您的请求可能会被返回，或者您会被转到“禁止”页面。
#From:as.IPSec,IPSec (VPN) 
as.IPSec,IPSec（VPN)
#From:.admin,Admin 
.admin,Admin
#From:gw.gm.65,eDonkey 
gw.gm.65,eDonkey
#From:tf.intro.FWChB,To upgrade the firmware, locate the upgrade file on the local hard drive with the Browse button.Once you have found the file to be used, click the Upload button below to start the firmware upgrade. 
tf.intro.FWChB,要升级固件，请先单击浏览按钮来确定固件在本地硬盘上的位置，当您找到要使用的文件后，单击上传按钮开始固件更新。
#From:BLOCKED,Blocked 
BLOCKED,被阻止
#From:wwa.msg.bigpond,BigPond Cable (Australia) 
wwa.msg.bigpond,BigPond Cable (澳大利亚) 
#From:tsl.EnLog,Enable Logging To Syslog Server 
tsl.EnLog,开启记录到系统日志服务器
#From:help819.5,Close Wait -- the server system has requested that the connection be stopped. 
help819.5,关闭等待--服务器系统已请求关闭连接。
#From:aw.TP.2,Low 
aw.TP.2,低
#From:bwsAT.,Authentication Timeout 
bwsAT.,验证超时
#From:.setupdone,Setup Complete! 
.setupdone,安装完成！
#From:li.intro,Log in to the router 
li.intro,登录到路由器
#From:IPSMTPCLIENT_MSG_FAILED,SMTP client failed to send email 
IPSMTPCLIENT_MSG_FAILED,SMTP客户端发送邮件失败
#From:bwz.note.ConWz,Before launching these wizards, please make sure you have followed all steps outlined in the Quick Installation Guide included in the package. 
bwz.note.ConWz,在打开此向导之前，请确定您是按照包装中的快速安装向导进行安装的。
#From:gw.gm.64,Gnutella 
gw.gm.64,Gnutella 
#From:help268,Reconnect Mode: 
help268,重连接模式：
#From:NONE_BLOCKED,None Blocked 
NONE_BLOCKED,未阻止
#From:tt.May,May 
tt.May,五月
#From:bwn.BPICT,Big Pond Internet Connection Type 
bwn.BPICT,Big Pond Internet连接类型 
#From:tt.time.15,2 pm 
tt.time.15,2 pm
#From:.Tue,Tue 
.Tue,星期二
#From:ss.clear_stats,Clear Statistics 
ss.clear_stats,清除数据
#From:help197,The end time is entered in the same format as the start time. The hour in the first box and the minutes in the second box. The end time is used for most other rules, but is not normally used for email events. 
help197,结束时间的格式必须和起始时间相同。第一个选框是小时，第二个是分钟。结束时间一般用于大多数规则，但是除了邮件事件。
#From:ai.intro.3,Filter rules can be used with Virtual Server, Port Forwarding, or Remote Administration features. 
ai.intro.3,过滤器规则可同虚拟服务器，端口转发或远程管理功能一起使用。
#From:GW_WAN_DISCONNECT_ON_INACTIVE,WAN connection inactive too long so attempting to disconnect 
GW_WAN_DISCONNECT_ON_INACTIVE,WAN连接未激活时间过长，尝试断开连接。
#From:DHCP_CLIENT_RELEASED_LEASE,The DHCP address %v is released by the user 
DHCP_CLIENT_RELEASED_LEASE,用户发布了DHCP地址%v
#From:wwa.set.sipa.title,Set Static IP Address Connection 
wwa.set.sipa.title,设置静态IP地址连接
#From:up.tz.71,(GMT+12:00) Auckland, Wellington 
up.tz.71,(GMT+12:00) 奥克兰,威灵顿 
#From:hhaf.alg,ALGs provide special handling of the IP payload for some protocols and applications to make them work with network address translation (NAT). If you are having trouble using any of these applications, try both enabling and disabling the corresponding ALG. 
hhaf.alg,ALG为一些协议或应用程序提供了特殊的IP过载解决方案，使其同网络地址解析（NAT）一起工作。如果您在使用这些应用程序时遇到问题，可尝试同时关闭或开启相应的ALG。
#From:help843,Check this option if your location observes daylight saving time. 
help843,如果您所处的位置是夏令时，请选择该选项。
#From:wprn.tt11,Verify that a printer is attached to the router's USB port. 
wprn.tt11,确认打印机已连接到了路由器的USB端口。
#From:.tstats,Traffic Statistics 
.tstats,流量数据
#From:IPPPPLCP_SET_REMOTE_OPTIONS,LCP sets remote options: ACCM: %lx, ACFC: %u, PFC: %u, MRU: %u 
IPPPPLCP_SET_REMOTE_OPTIONS,LCP设置远程选项：ACCM: %lx, ACFC: %u, PFC: %u, MRU: %u
#From:tf.COLF,Check Online Now for Latest Firmware Version 
tf.COLF,选择立即上线，查看最新的固件版本
#From:up.tz.28,(GMT+01:00) Brussels, Copenhagen, Madrid, Paris 
up.tz.28,(GMT+01:00) 布鲁塞尔,哥本哈根,马德里,巴黎 
#From:tt.Mar,Mar 
tt.Mar,三月
#From:.aa.allow.all,Log Web Access Only 
.aa.allow.all,只记录web访问
#From:wwa.wanmode.l2tp,Username / Password Connection (L2TP) 
wwa.wanmode.l2tp,用户名/密码连接（L2TP）
#From:.dmzh,DMZ Host 
.dmzh,DMZ主机
#From:GW_TIME_RESOLVED_DNS,Time server %s is at IP address %v 
GW_TIME_RESOLVED_DNS,时间服务器%sIP地址为%v
#From:bws.EAPx,EAP (802.1x) 
bws.EAPx,EAP(802.1X)
#From:aa.PolName,Policy Name 
aa.PolName,策略名称
#From:wwa.set.sipa.msg,To set up this connection you will need to have a complete list of IP information provided by your Internet Service Provider. If you have a Static IP connection and do not have this information, please contact your ISP. 
wwa.set.sipa.msg,要建立此连接，您需要一份由您的ISP提供的完成的IP信息列表。如果您使用静态IP连接且没有此信息，请联系您的ISP。
#From:.aa.wiz.s2.title,Step 1: Choose Policy Name 
.aa.wiz.s2.title,步骤1：选择策略名称
#From:PPTP_EVENT_TUNNEL_CONNECTED,PPTP connected to server "%s" with ID 0x%04X 
PPTP_EVENT_TUNNEL_CONNECTED,PPTP连接到服务器"%s"，ID为0x%04X
#From:USB_LOG_STORAGE_NOT_FOUND,No WCN compatible USB mass storage interface was found 
USB_LOG_STORAGE_NOT_FOUND,未找到兼容WCN的USB接口
#From:GW_INIT_DONE,Device initialized 
GW_INIT_DONE,设备初始化完毕
#From:carriertype.ct.0,Dynamic IP 
carriertype.ct.0,动态IP
#From:help305,These are the settings of the LAN (Local Area Network) interface for the router. The router's local network (LAN) settings are configured based on the IP Address and Subnet Mask assigned in this section. The IP address is also used to access this Web-based management interface. 
help305,这些是路由器的LAN（局域网）的设置。路由器的本地网络是基于IP地址和分配给的子网掩码来配置的。IP地址用来访问web管理界面。
#From:tps.raw,Raw TCP Port Printing 
tps.raw,后台TCP端口正在打印
#From:av.PubP,Public Port 
av.PubP,公共端口
#From:help374,WPA Mode: 
help374,WPA模式：
#From:PPTP_EVENT_TUNNEL_CLEAR_DOWN_REQUEST,PPTP received a tunnel clear down request from the application, the tunnel will now be closed. 
PPTP_EVENT_TUNNEL_CLEAR_DOWN_REQUEST,PPTP从应用程序处接收到了通道关闭请求，通道将被关闭。
#From:hhac.delete,Click the <strong>Delete</strong> icon to permanently remove a rule. 
hhac.delete,点击<strong>删除</strong>图标可永久移除一条规则。
#From:IPL2TP_SESSION_CLEAR_DOWN_REQUEST,L2TP local session 0x%04X terminating 
IPL2TP_SESSION_CLEAR_DOWN_REQUEST,L2TP本地会话0x%04X终止
#From:aa.ACR.c2,Policy 
aa.ACR.c2,策略
#From:help29,The requests from the LAN machine will not be looped back if Internet access is blocked at the time of access. To work around this problem, access the LAN machine using its LAN-side identity. 
help29,如果互联网访问在访问的同时被阻止，则来至LAN计算机的请求不会被返回。要解决此问题，请使用LAN计算机的LAN端身份。
#From:up.tz.01,(GMT-11:00) Midway Island, Samoa 
up.tz.01,(GMT-11:00) 中途岛,萨摩亚 
#From:.app,Application 
.app,应用程序
#From:bln.alert.1,Invalid LAN subnet mask. 
bln.alert.1,无效的LAN子网掩码。
#From:GW_WAN_RATE_ESTIMATOR_STARTED_ON_WAN,Estimating speed of WAN interface 
GW_WAN_RATE_ESTIMATOR_STARTED_ON_WAN,估计WAN接口的速率
#From:sl.FWandSec,Firewall &amp; Security 
sl.FWandSec,防火墙 &amp; 安全
#From:hhan.ping,For added security, it is recommended that you disable the WAN Ping Respond option. Ping is often used by malicious Internet users to locate active networks or PCs. 
hhan.ping,为了更高的安全，建议您关闭WAN Ping回应选项。Ping经常被恶意的互联网用户用来定义活动的网络或个人计算机。
#From:sa.NAT,NAT 
sa.NAT,NAT
#From:hhta.en,Enabling Remote Management, allows you or others to change the router configuration from a computer on the Internet. 
hhta.en,开启远程管理，让您或其他人可从互联网上的一台计算机上更改路由器的配置。
#From:GW_SMTP_EMAIL_FAILED_DNS,Unable to find DNS record for SMTP (Email) server %s 
GW_SMTP_EMAIL_FAILED_DNS,不能找到用于SMTP（Email）服务器%s的DNS记录
#From:help810,The number of packets that were dropped due to Ethernet collisions (two or more devices attempting to use an Ethernet circuit at the same time). 
help810,因以太网冲突（两台以上的设备在同一时间使用同一个以太网回路）而被丢弃的数据包数。
#From:.WOL,Wake-On-LAN 
.WOL,局域网唤醒
#From:help272,On demand: 
help272,需求：
#From:help819.1,None -- This entry is used as a placeholder for a future connection that may occur. 
help819.1,无--该条目用作以后可能会发生的连接的代替符。
#From:IPNAT_TCP_BLOCKED_INGRESS_ICMP_ERROR_PACKET,Blocked incoming ICMP error message (ICMP type %u) from %v to %v as there is no TCP connection active between %v:%u and %v:%u 
IPNAT_TCP_BLOCKED_INGRESS_ICMP_ERROR_PACKET,被阻止的ICMP错误信息（ICMP类型%u）从%v到%v，因在%v:%u和%v:%u之间没有激活的TCP连接
#From:up.tz.14,(GMT-04:00) Atlantic Time (Canada) 
up.tz.14,(GMT-04:00) 大西洋时间（加拿大）
#From:gw.gm.51,Star Trek: Elite Force II 
gw.gm.51,星际旅行：精英力量II
#From:td.SvAd,Server Address 
td.SvAd,服务器地址
#From:hhag.40,You can enter ports in various formats: 
hhag.40,您可以以各种格式输入端口：
#From:help169,Inbound Filters can be used for limiting access to a server on your network to a system or group of systems. Filter rules can be used with Virtual Server, Gaming, or Remote Administration features. Each filter can be used for several functions; for example a "Game Clan" filter might allow all of the members of a particular gaming group to play several different games for which gaming entries have been created. At the same time an "Admin" filter might only allows systems from your office network to access the WAN admin pages and an FTP server you use at home. If you add an IP address to a filter, the change is effected in all of the places where the filter is used. 
help169,内部过滤器可限制您网络上的服务器访问一个或一组系统。过滤器规则可同虚拟服务器，游戏或远程管理功能一起使用。每个过滤器都可用于几个功能；例如“Game Clan”过滤器可在创建了游戏条目后，允许一个特定游戏小组的所有成员玩几种不同的游戏。同时“Admin”过滤器仅允许来自您办公网络的系统访问WAN管理页面和您在家使用的FTP服务器。如果您在过滤器中添加了一条IP地址，则更改将会在所有执行该规则的地方生效。
#From:help324,The amount of time that a computer may have an IP address before it is required to renew the lease. The lease functions just as a lease on an apartment would. The initial lease designates the amount of time before the lease expires. If the tenant wishes to retain the address when the lease is expired then a new lease is established. If the lease expires and the address is no longer needed than another tenant may use the address. 
help324,一台计算机在被要求更新其租期前，可拥有一个IP地址的时间。租期功能如同公寓的租期一样。初始租期指定了租期到期的时间。如果租借方在租期到期后想继续租用，就会生成一个新的租期。如果租期到期且该地址不再会被使用，则另一个租借方就会使用这个地址。
#From:htsc.intro,"Ping" is an Internet utility function that sends a series of short messages to a target computer and reports the results. You can use it to test whether a computer is running, and to get an idea of the quality of the connection to that computer, based on the speed of the responses. 
htsc.intro,“Ping”是一个互联网命令，他向目标计算机发送一系列短信息然后汇报回复。您可以使用该命令来测试一台计算机是否在运行，或根据等待回应的速度来测试到该计算机的连接是否顺畅。
#From:KR4.ww,WLAN Partition 
KR4.ww,WLAN分支
#From:help317,The computers (and other devices) connected to your LAN also need to have their TCP/IP configuration set to "DHCP" or "Obtain an IP address automatically". 
help317,连接到您局域网的计算机（或其他设备）也需要将其TCP/IP设置成为“DHCP”或“自动获取IP地址”。
#From:anet.multicast,Multicast Streams 
anet.multicast,多播流
#From:.aa.wiz.s1.title,Add New Policy 
.aa.wiz.s1.title,添加新的策略
#From:IPL2TP_SHUTDOWN_COMPLETE,L2TP local tunnel 0x%04X RTE module has shut down. 
IPL2TP_SHUTDOWN_COMPLETE,L2TP本地通道0x%04X RTE模块已关闭。
#From:help819.7,Last ACK -- Waiting for a short time while a connection that was in Close Wait is fully closed. 
help819.7,最后ACK--一个处于等待关闭的连接完全关闭前等待的时间。
#From:help9,Select the Protocol (for example <code>TCP</code>). 
help9,选择协议（例如<code>TCP</code>）。
#From:help809,The number of packets that were dropped while being received, due to errors, collisions, or router resource limitations. 
help809,因错误，冲突或路由器资源限制而在接收时被丢弃的数据包数。
#From:GW_LAN_CARRIER_DETECTED,LAN Ethernet Carrier Detected 
GW_LAN_CARRIER_DETECTED,检测到LAN以太网携带者
#From:sl.alert.1,Are you sure you want to clear all log entries? 
sl.alert.1,您确定要清除所有日志条目吗？
#From:as.TPRange.b,Trigger Port 
as.TPRange.b,触发端口
#From:tt.week.1,1st 
tt.week.1,第一
#From:up.jt.3,If so, press Ok. 
up.jt.3,如果是，请按确认
#From:.clear,Clear 
.clear,清除
#From:PPPOE_EVENT_DISCONNECT,Terminating PPPoE session 0x%04X 
PPPOE_EVENT_DISCONNECT,正在终止PPPoE会话0x%04X
#From:WIFISC_IR_REGISTRATION_FAIL_2,WPS Internal Registrar failed to add wireless station %m, reason: %s, err_code %u. 
WIFISC_IR_REGISTRATION_FAIL_2,WPS内部注册机添加无线工作站%m失败，原因：%s，错误代码%u。
#From:.sdi.staticip,Static IP 
.sdi.staticip,静态IP
#From:wwa.msg.set.dhcp,To set up this connection, please make sure that you are connected to the D-Link Router with the PC that was originally connected to your broadband connection. If you are, then click the Clone MAC button to copy your computer's MAC Address to the D-Link Router. 
wwa.msg.set.dhcp,要建立此连接，请确认您是用一台有宽带连接的计算机连接到D-Link路由器的。如果是，请点击复制MAC按钮将计算机的MAC地址复制到路由器。
#From:hhts.name,Give each schedule a name that is meaningful to you. For example, a schedule for Monday through Friday from 3:00pm to 9:00pm, might be called "After School". 
hhts.name,为每个计划表分配一个对您来说有意义的名称。例如，一个从每周一到周五每天下午3点到9点的计划表可被命名为“放学后”
#From:WAN,WAN 
WAN,WAN
#From:help825,Enter a password for the user "user", who will have read-only access to the Web-based management interface. 
help825,为用户“user”输入一个密码，该用户将会拥有访问web管理界面的只读权限。
#From:hham.add,Computers that have obtained an IP address from the router's DHCP server will be in the DHCP Client List. Select a device from the drop down menu, then click the arrow to add that device's MAC address to the list. 
hham.add,从路由器的DHCP服务器获取了IP地址的计算机都会进入DHCP客户端列表。从下拉菜单中选择一个设备，然后点击箭头将该设备的MAC地址添加到列表中。
#From:ss.WANStats,WAN Statistics 
ss.WANStats,WAN数据
#From:GW_WAN_CONNECT_ON_ACTIVE,Attempting to start WAN connection on-demand 
GW_WAN_CONNECT_ON_ACTIVE,按要求尝试开始一个WAN连接
#From:aa.sched.conf.1,You must abandon all your changes in order to define a new schedule. 
aa.sched.conf.1,要定义一个新的计划表，您必须放弃您所有的更改。
#From:GW_INET_ACCESS_POLICY_END_OTHERS,Policy %s stopped; Internet access for all non-specified systems changed to: %s 
GW_INET_ACCESS_POLICY_END_OTHERS,策略%s已停止；所有未指定系统的Internet访问更改为：%s
#From:bd.title.list,DHCP Reservations List 
bd.title.list,DHCP保留列表
#From:.aa.logging,Web Access Logging 
.aa.logging,Web访问日志
#From:IPNAT_BLOCKED_INGRESS_ICMP_ERROR_PACKET,Blocked incoming ICMP error message (ICMP type %u) from %v to %v as there is no session active for protocol %u between %v and %v 
IPNAT_BLOCKED_INGRESS_ICMP_ERROR_PACKET,被阻止的ICMP错误信息（ICMP类型%u）从%v到%v，因没有激活的会话(协议%u)在%v和%v之间
#From:.username,User Name 
.username,用户名
#From:.enable,Enable 
.enable,开启
#From:GW_TIME_FAILED_DNS,Unable to find DNS record for time server %s 
GW_TIME_FAILED_DNS,无法查找时间服务器%s的DNS记录
#From:wprn.tt1,Refer to the documentation that came with your router for printer setup instructions specific to your operating system. 
wprn.tt1,根据您的操作系统参考随路由器赠送的手册中关于打印机按转的说明
#From:tt.time.22,9 pm 
tt.time.22,9 pm
#From:help256,IP address 
help256,IP地址
#From:GW_INET_ACCESS_INITIAL_IP_FAIL,Internet access policy for IP address %v cannot be set 
GW_INET_ACCESS_INITIAL_IP_FAIL,IP地址%v的互联网访问策略不能被设定
#From:.aa.details,Details 
.aa.details,详细
#From:help36,Allows applications that use Real Time Streaming Protocol to receive streaming media from the internet. QuickTime and Real Player are some of the common applications using this protocol. 
help36,允许使用及时数据流协议的应用程序从互联网上接受流媒体。QuickTime和RealPlayer就是使用该协议的软件之一。
#From:help817,The port number of the LAN-side application as viewed by the WAN-side application. 
help817,被WAN端应用程序查看的LAN端应用程序的端口号
#From:bwn.Mode.PPPoE,PPPoE (Username / Password) 
bwn.Mode.PPPoE,PPPoE（用户名/密码）
#From:.allowall,Allow All 
.allowall,允许全部
#From:awf.clearlist,Clear the list below... 
awf.clearlist,清除下面的列表
#From:sc.intro.rb3,The router must be rebooted before settings saved on a previous page will take effect. You can reboot the router now using the 'Reboot' button below, or press the 'Continue' button and make other changes. 
sc.intro.rb3,路由器上更改的设置生效之前必须重启。您可以使用下面的“重启”按钮立即重启设备，或点击“继续”按钮更改其他设置。
#From:help67,TCP Ports To Open 
help67,TCP端口为打开
#From:gw.gm.37,Quake 2 
gw.gm.37,Quake2
#From:up.ae.wic.3,Otherwise press 'Cancel'. 
up.ae.wic.3,否则请按“取消”
#From:wwa.title.s1,Step 1: Set your Password 
wwa.title.s1,第一步：设置您的密码
#From:tps.drname,Driver Name 
tps.drname,驱动名称
#From:tt.CopyTime,Copy Your Computer's Time Settings 
tt.CopyTime,复制您计算机的时间设置
#From:IPL2TP_SEQUENCING_ACTIVATED,L2TP session server started sending sequencing numbers for local session 0x%04X 
IPL2TP_SEQUENCING_ACTIVATED,L2TP会话服务器开始发送本地会话0x%04X的序列号
#From:bd.Reserve,Reserve 
bd.Reserve,保留
#From:IPMSNMESSENGERALG_REJECTED_PACKET,MSN Messenger ALG rejected packet from %v:%u to %v:%u 
IPMSNMESSENGERALG_REJECTED_PACKET,MSN Messenger ALG拒绝从%v:%u到%v:%u的数据包
#From:help782,The wireless section allows you to view the wireless clients that are connected to your wireless router. 
help782,无线部分允许您浏览连接到您无线路由器的无线客户端。
#From:gw.gm.16,Dungeon Siege 
gw.gm.16,地牢攻略
#From:IPPORTFORWARDALG_UDP_PACKET_ALLOC_FAILURE,Port forwarding ALG failed to allocate session for UDP packet from %v:%u to %v:%u 
IPPORTFORWARDALG_UDP_PACKET_ALLOC_FAILURE,端口转发ALG为%v:%u到%v:%u的UDP数据包分配会话失败。
#From:wprn.mod,Model 
wprn.mod,模型
#From:help119,Note: 
help119,注意：
#From:gw.gm.46,Silent Hunter II 
gw.gm.46,寂静猎手II
#From:am.FM.3,Turn MAC Filtering ON and ALLOW computers listed to access the network 
am.FM.3,打开MAC过滤并允许列出的计算机访问网络
#From:sps.lpd1,Use this information to configure your computer for LPD/LPR printing. 
sps.lpd1,使用此信息来配置您的计算机用于LPD/LPR打印。
#From:tss.SysSt,System Settings 
tss.SysSt,系统设置
#From:ta.ResConf,Restore Configuration from File 
ta.ResConf,从文件恢复配置
#From:WCN_LOG_SAVE,Updated flash to wireless configuration 
WCN_LOG_SAVE,更新无线配置的闪存
#From:as.FPrt,Firewall Traffic Type 
as.FPrt,防火墙通讯类型
#From:help823.11,UDP connections. 
help823.11,UDP连接。
#From:tsc.EvDay,Every Day 
tsc.EvDay,每天
#From:ham.del,Click the <span class="button_ref">Clear</span> button to remove the MAC address from the MAC Filtering list. 
ham.del,点击<span class="button_ref">清除</span>按钮从MAC过滤器列表中移除MAC地址
#From:.PPPoE,PPPoE 
.PPPoE,PPPoE
#From:wwa.intro.online1,It appears that you have already successfully connected your new router to the Internet. 
wwa.intro.online1,您已经成功的将您的新路由器连接到了互联网。
#From:tt.dstend,DST End 
tt.dstend,DST终端
#From:tsc.SchRu,Schedule Rule 
tsc.SchRu,计划表规则
#From:GW_AUTH_FAILED,Failed configuration authentication attempt by IP address %v 
GW_AUTH_FAILED,IP地址%v失败的配置验证尝试
#From:.scheds,Schedules 
.scheds,计划表
#From:up.tz.56,(GMT+08:00) Irkutsk, Ulaan Bataar 
up.tz.56,(GMT+08:00) 伊尔库次克，乌兰巴托
#From:.dns2,Secondary DNS Server 
.dns2,备选DNS服务器
#From:tsc.pingt.msg2,You must enter a host name or IP address. 
tsc.pingt.msg2,您必须输入一个主机名或IP地址。
#From:tps.apc1,These settings are automatically configured and should be modified only by advanced users. 
tps.apc1,这些设置是自动配置的，只有高级用户才能修改。
#From:GW_INET_ACCESS_DROP_ACCESS_CONTROL_WITH_PORT,Internet access control dropped packet from %v:%u to %v:%u (protocol %u) 
GW_INET_ACCESS_DROP_ACCESS_CONTROL_WITH_PORT,互联网访问控制丢失的从%v:%u到%v:%u的数据包（协议%u）
#From:up.tz.48,(GMT+05:45) Kathmandu 
up.tz.48,(GMT+05:45) 加德满都 
#From:.password_admin,Admin Password 
.password_admin,管理员密码
#From:bd.intro.,Use this section to configure the built-in DHCP Server to assign IP addresses to the computers on your network. 
bd.intro.,使用该部分来配置内置DHCP服务器以分配IP地址给您网络上的计算机。
#From:help387,RADIUS Server IP Address: 
help387,RADIUS服务器IP地址：
#From:GW_AUTH_SUCCEEDED,Allowed configuration authentication by IP address %v 
GW_AUTH_SUCCEEDED,IP地址%v允许的配置验证
#From:IPPPPCHAP_AUTH_SENT,CHAP Authentication details sent to peer. 
IPPPPCHAP_AUTH_SENT,CHAP验证明细被发送到计算机。
#From:.bsecure.parental.blurb,The Parental Controls service is a simple yet effective way to limit access to offensive, illegal or hateful web sites. This service covers all PC's or Apple Computers behind your router and is always automatically updated in real time. (No need for you to download or manually input sites.) This service is fast and will not slow down your network. 
.bsecure.parental.blurb,家长控制服务是一个简单而有效的限制访问进攻性、不合法或令人讨厌的站点的方法。该服务覆盖了您路由器下面的所有PC或苹果计算机，并总是及时自动更新。（您不需要下载或手动输入站点）该服务十分快速并且不会降低您网络的速度。
#From:.aa.wiz.s1.msg,This wizard will guide you through the following steps to add a new policy for Access Control. 
.aa.wiz.s1.msg,该向导将通过下面的步骤指导您添加一条新的策略到访问控制中。
#From:help807,The number of packets received by the router. 
help807,路由器接收到的数据包数
#From:up.tz.61,(GMT+09:00) Seoul 
up.tz.61,(GMT+09:00) 首尔 
#From:.L2TPgw,L2TP Gateway IP Address 
.L2TPgw,L2TP网关IP地址
#From:IPMSCHAP_AUTH_FAIL,MSCHAP authentication failed - please check login details. 
IPMSCHAP_AUTH_FAIL,MSCHAP验证失败--请检查登录详细信息。
#From:help395,Advanced: 
help395,高级：
#From:help880,Once you have found the file to be used, click the <span class="button_ref">Upload</span> button below to start the firmware upgrade process. This can take a minute or more. 
help880,当您找到了要使用的文件后，点击<span class="button_ref">上传</span>按钮来开始固件更新。这个过程可能会持续1分钟或更久。
#From:gw.gm.29,Medal of Honor: Games 
gw.gm.29,荣誉勋章：游戏
#From:help95,The rule applies to a flow of messages whose WAN-side IP address falls within the range set here. 
help95,该规则应用于所有WAN端IP地址处于这个范围的信息流。
#From:aw.BP,Beacon Period 
aw.BP,烽火时代
#From:GW_WAN_SERVICES_STOPPED,Stopping WAN Services 
GW_WAN_SERVICES_STOPPED,停止WAN服务
#From:gw.gm.79,TeamSpeak 
gw.gm.79,队伍讲话
#From:help850,Select a Network Time Server for synchronization. You can type in the address of a time server or select one from the list. If you have trouble using one server, select another. 
help850,选择一个网络时间服务器来进行同步。您可以输入时间服务器的地址，也可以在下面的列表中选择一个。如果您使用其中一个服务器时遇到困难，请选择另一个。
#From:help4,You are hosting a Web Server on a PC that has LAN IP Address of 192.168.0.50 and your ISP is blocking Port 80. 
help4,您的一台LAN IP地址为192.168.0.50的PC上正在做web服务器的主机，您的ISP正在阻止端口80.
#From:up.tz.18,(GMT-03:00) Brazilia 
up.tz.18,(GMT-03:00) 巴西利亚 
#From:help168a,When you use the Virtual Server, Port Forwarding, or Remote Administration features to open specific ports to traffic from the Internet, you could be increasing the exposure of your LAN to cyberattacks from the Internet. 
help168a,当您使用虚拟服务、端口转发或远程管理功能从互联网打开指定端口时，您可能会增加将您的LAN暴露给来自互联网的网络攻击的危险。
#From:PPTP_ALG_REJECTED_PACKET,PPTP ALG rejected packet from %v:%u to %v:%u 
PPTP_ALG_REJECTED_PACKET,PPTP ALG拒绝了从%v:%u到%v:%u的数据包
#From:te.SMTPSv,SMTP Server Address 
te.SMTPSv,SMTP服务器地址
#From:help334,A MAC address is usually located on a sticker on the bottom of a network device. The MAC address is comprised of twelve digits. Each pair of hexadecimal digits are usually separated by dashes or colons such as 00-0D-88-11-22-33 or 00:0D:88:11:22:33. If your network device is a computer and the network card is already located inside the computer, you can connect to the D-Link router from the computer and click the <span class="button_ref">Copy Your PC's MAC Address</span> button to enter the MAC address. 
help334,MAC地址通常位于网络设备底部的粘贴物上。MAC地址由12个数字组成。每对十六进制数字通常由短横线或冒号隔开，如00-0D-88-11-22-33或00:0D:88:11:22:33。如果您的网络设备是一台计算机，且已经安装了网卡，则您可以从这台计算机连接到D-Link路由器并点击<span class="button_ref">复制您计算机的MAC地址</span>按钮来输入MAC地址。
#From:gw.gm.84,Battlefield 2 
gw.gm.84,战地2
#From:IPL2TP_LOW_RESOURCES,L2TP local tunnel 0x%04X RTE module is low on resources. 
IPL2TP_LOW_RESOURCES,L2TP本地通道0x%04X RTE模块资源过低。
#From:hhac.add,Click <strong>Add Policy</strong> to start the processes of creating a rule. You can cancel the process at any time. When you are finished creating a rule it will be added to the <strong>Policy Table</strong> below. 
hhac.add,点击<strong>添加策略</strong>开始创建一个新的规则。您可以在任何时候取消这个进程。当您完成创建规则的进程后，该规则将会被添加到下面的<strong>策略表</strong>中。
#From:anet.wp.auto2,Auto 10/100Mbps 
anet.wp.auto2,自动10/100Mbps
#From:as.RTSP,RTSP 
as.RTSP,RTSP
#From:.authsecmodel,Authentication &amp; Security 
.authsecmodel,验证&amp;安全
#From:bwn.MTU,MTU 
bwn.MTU,MTU
#From:gw.gm.72,Steam 
gw.gm.72,流
#From:.WAN,WAN 
.WAN,WAN
#From:help10,Ensure the schedule is set to <code>Always</code> 
help10,确定计划表被设定为<code>总是</code>
#From:gw.gm.8,Command and Conquer Generals 
gw.gm.8,命令与征服 将军
#From:.WPA,WPA 
.WPA,WPA
#From:help897,Re-type the password or key provided by your service provider. If the Dynamic DNS provider supplies only a key, enter that key in all three fields. 
help897,重新输入您的服务提供商提供的密码或密钥。如果动态DNS提供商只提供了一个密钥，则在三栏都输入该密钥。
#From:IPNAT_TCP_BLOCKED_INGRESS_BAD_SEQ,Blocked incoming TCP packet from %v:%u to %v:%u with unexpected sequence %lu (expected %lu to %lu) 
IPNAT_TCP_BLOCKED_INGRESS_BAD_SEQ,阻止从%v:%udao %v:%u带有不可更改序号%lu（可更改%lu到%lu）的TCP数据包
#From:tsc.pingt.msg7,Response from 
tsc.pingt.msg7,从……回应
#From:tt.Jan,Jan 
tt.Jan,一月
#From:gw.gm.5,Battlefield: Vietnam 
gw.gm.5,战地：越南
#From:.adwwls,Advanced Wireless 
.adwwls,高级无线
#From:tsc.pingt.msg100,Pings sent: 
tsc.pingt.msg100,Ping发送：
#From:gw.gm.55,Unreal 
gw.gm.55,不真实
#From:wwa.intro.s1,By default, your new D-Link Router does not have a password configured for administrator access to the Web-based configuration pages. To secure your new networking device, please set and verify a password below: 
wwa.intro.s1,缺省状态下，您的新D-Link路由器没有设置访问web管理界面的管理员密码。为了确保您设备的安全，请在下面设置并确认一个密码：
#From:anet.wan.ping,WAN Ping 
anet.wan.ping,WAN Ping
#From:GW_DHCP_SERVER_WINS_INCOMPATIBILITY_WARNING,<warn>WINS/NetBIOS settings cannot be learned from the internet in this Internet mode - WINS will not function as expected.</warn> 
GW_DHCP_SERVER_WINS_INCOMPATIBILITY_WARNING,<warn>WINS/NetBIOS设置可以从在互联网模式中的互联网获得-WINS不会像预计的工作。</warn>
#From:dlink.help146,Many web sites construct pages with images and content from other web sites. For example, to access <code>my.yahoo.com</code>, you would need to select allow and type <code>yahoo.com</code>, <code>yimg.com</code>, and <code>doubleclick.net</code>. 
dlink.help146,许多web网站从其它web网站创建带图像的页面和内容。例如，要访问<code>my.yahoo.com</code>，您需要选择允许，然后输入<code>yahoo.com</code>， <code>yimg.com</code>, 和<code>doubleclick.net</code>。
#From:bws.RMAA,MAC Address Authentication 
bws.RMAA,MAC地址认证
#From:aa.wiz.s1.msg2,Step 2 - Select a schedule 
aa.wiz.s1.msg2,第2步-选择计划表
#From:tt.time.7,6 am 
tt.time.7,6 am
#From:help822a,Initiated from WAN to LAN. 
help822a,从WAN到LAN开始
#From:gw.gm.1,America's Army 
gw.gm.1,美国的军队
#From:up.tz.37,(GMT+03:00) Baghdad 
up.tz.37,(GMT+03:00)巴格达
#From:bws.SM,Security Mode 
bws.SM,安全模式
#From:up.tz.68,(GMT+10:00) Hobart 
up.tz.68,(GMT+10:00)霍巴特
#From:wwl.s4.intro.za3,- Exactly 64 characters using 0-9 and A-F 
wwl.s4.intro.za3,使用0-9和A-F准确地有64个字符
#From:.prev,Prev 
.prev,Prev
#From:bwl.EW,Enable Wireless 
bwl.EW,启用无线
#From:wprn.foo1,The Printer Setup Wizard requires the raw TCP port printing protocol. This protocol is currently disabled on your router. 
wprn.foo1,打印机设置指南要求原TCP端口打印协议。当前在您的路由器上禁用此协议。
#From:help355,A wireless network uses specific channels in the wireless spectrum to handle communication between clients. Some channels in your area may have interference from other electronic devices. Choose the clearest channel to help optimize the performance and coverage of your wireless network. 
help355,无线网络使用在无线范围中指定的信道来处理客户端之间的通信。在您的区域中的某些信道可能受到来自其它电子设备的干扰。选择最清晰的信道帮助优化性能和无线网络的覆盖范围。
#From:aa.ACR.c6,Logged 
aa.ACR.c6,登录
#From:bws.2RSSS,Second RADIUS server Shared Secret 
bws.2RSSS,备选RADIUS服务器共享密匙
#From:help391,RADIUS Server Shared Secret: 
help391,RADIUS服务器共享密匙
#From:.PM,PM 
.PM,下午
#From:help174,Define the ranges of Internet addresses this rule applies to. For a single IP address, enter the same address in both the <span class="option">Start</span> and <span class="option">End</span> boxes. Up to eight ranges can be entered. The <span class="option">Enable</span> checkbox allows you to turn on or off specific entries in the list of ranges. 
help174,定义此规则应用的互联网地址的范围。对于单独的IP地址，在<span class="option">开始</span>和<span class="option">结束</span>框中输入相同的地址。可以输入最多8个范围。<span class="option">启用</span>复选框允许您打开或关闭在范围列表中的指定条目。
#From:PPPOE_EVENT_DISCOVERY_TIMEOUT,PPPoE timed out waiting for connection. Connection attempt failed. 
PPPOE_EVENT_DISCOVERY_TIMEOUT,PPPoE超时等候连接。试图连接失败。
#From:WCN_LOG_NO_WSETTING,Device %s, wsetting.wfc: file not found 
WCN_LOG_NO_WSETTING,设备%s，wsetting.wfc:未找到文件
#From:haar.p,Parameters for an Application Rule 
haar.p,应用规则的参数
#From:anet.wan.ping.2,If you leave this option unchecked, you are causing the router to ignore <code>ping</code> commands for the public WAN IP address of the router. 
anet.wan.ping.2,如果您未选中此选项，则您使得路由器忽略路由器的公共WAN IP地址的 <code>ping</code>命令。
#From:help878,To upgrade the firmware, follow these steps: 
help878,要升级固件，请遵循这些步骤：
#From:LOGGED,, Logged 
LOGGED,，登录
#From:bwn.RM.2,Manual 
bwn.RM.2,手动
#From:bws.RSSs,RADIUS server Shared Secret 
bws.RSSs,RADIUS服务器共享密匙
#From:up.tz.43,(GMT+04:00) Baku, Tbilisi, Yerevan 
up.tz.43,(GMT+04:00) 巴库,第比利斯,耶烈万
#From:IPRTSPALG_REJECTED_PACKET,RTSP ALG rejected packet from %v:%u to %v:%u 
IPRTSPALG_REJECTED_PACKET,RTSP ALG拒绝从 %v:%u到%v:%u的数据包
#From:GW_SCHEDULES_IN_USE_INVALID.s2,can't be deleted or renamed because it is used. 
GW_SCHEDULES_IN_USE_INVALID.s2,不能删除或重命名，因为被使用。
#From:help1,Advanced Help 
help1,高级帮助
#From:gw.gm.73,MSN Game Zone 
gw.gm.73,MSN游戏区域
#From:hhtsn.intro,Clicking any of these links or buttons will take you to another web site for further information. 
hhtsn.intro,单击这些链接中的任何一个或按钮会使您访问另一个web网站，以便进一步获取信息。
#From:tsc.pingr,Ping Result 
tsc.pingr,Ping结果
#From:at.UpSp,Manual Uplink Speed 
at.UpSp,手动向上传输速度
#From:aa.wiz.s1.msg6,Step 6 - Configure Web Access Logging 
aa.wiz.s1.msg6,第6步-配置Web访问登录
#From:.PPTPip,PPTP IP Address 
.PPTPip,PPTP IP地址
#From:help185,A DTIM is a countdown informing clients of the next window for listening to broadcast and multicast messages. When the wireless router has buffered broadcast or multicast messages for associated clients, it sends the next DTIM with a DTIM Interval value. Wireless clients detect the beacons and awaken to receive the broadcast and multicast messages. The default value is 1. Valid settings are between 1 and 255. 
help185,DTIM是下一个窗口的倒数通知客户端，用于侦听广播和多播信息。当无线路由器缓冲相关客户端的广播或多播信息时，用DTIM间隔时间值发送下一个DTIM。无线客户端检测信号，并提醒接收广播和多播信息。缺省值是1.有效设置在1到255间。
#From:help799,Click this button after changing Log Options to make them effective and permanent. 
help799,改变日志选项后单击此按钮，使得日志选项有效和永久。
#From:up.tz.17,(GMT-03:30) Newfoundland 
up.tz.17,(GMT-03:30)芬兰岛
#From:sd.intro,All of your Internet and network connection details are displayed on this page. The firmware version is also displayed here. 
sd.intro,所有您的互联网和网络连接详细信息在此页中显示。固件版本也在此显示。
#From:tf.Upload,Upload 
tf.Upload,上传
#From:tt.Second,Second 
tt.Second,备用
#From:wps.lost,This will cause all wireless settings to be lost. 
wps.lost,这样会导致丢失所有无线设置。
#From:help26,Note: 
help26,注意：
#From:up.tz.35,(GMT+02:00) Helsinki, Riga, Tallinn 
up.tz.35,(GMT+02:00) 赫尔辛基,里加,塔林
#From:bwn.intro.ICS,Use this section to configure your Internet Connection type. There are several connection types to choose from: Static IP, DHCP, PPPoE, PPTP, L2TP, and BigPond. If you are unsure of your connection method, please contact your Internet Service Provider. 
bwn.intro.ICS,使用此节配置您的互联网连接类型。可以从静态IP、DHCP、PPPoE、PPTP和L2TP中选择连接类型。如果您不确定连接方法，请联系您的互联网服务供应商。
#From:help81,When enabled, this option causes the router to automatically measure the useful uplink bandwidth each time the WAN interface is re-established (after a reboot, for example). 
help81,启用时，此选项造成路由器自动测量每次重新建立WAN接口（例如重启后）的有用上行带宽。
#From:help833,This option allows you to save the router's configuration to a file on your computer. Be sure to save the configuration before performing a firmware upgrade. 
help833,此选项允许您把路由器的配置保存到计算机的文件上。确保在运行固件升级前保存此配置。
#From:tps.intro3,Your D-Link Router includes an integrated print server that allows a printer to be shared between multiple computers on your network. From this page you can select which printing protocols to enable. 
tps.intro3,您的D-Link路由器包括集成打印服务器，它允许打印机在网络上的多台计算机之间共享。根据本页，您可以选择启用哪个打印协议。
#From:ss.Sent,Sent 
ss.Sent,发送
#From:help378,Group Key Update Interval: 
help378,组密匙更新间隔时间：
#From:gw.gm.80,Tribes of Vengeance 
gw.gm.80,复仇部落
#From:.uploadgood,Upload Succeeded 
.uploadgood,上传成功
#From:wps.p3.2,-PIN (Personal Identification Number) 
wps.p3.2,PIN（个人身份号）
#From:wprn.s3c,The setup executable will search for a compatible printer driver on your computer. If one cannot be found, you will be prompted to insert the driver CD that shipped with the printer. 
wprn.s3c,可执行的设置会在您的计算机上寻找兼容的打印机驱动器。如果不能找到一个驱动器，则您会立即插入和打印机一起装船的驱动器CD。
#From:haf.dmz.20,The router provides only limited firewall protection for the DMZ host. The router does not forward a TCP packet that does not match an active DMZ session, unless it is a connection establishment packet (SYN). Except for this limited protection, the DMZ host is effectively "outside the firewall". Anyone considering using a DMZ host should also consider running a firewall on that DMZ host system to provide additional protection. 
haf.dmz.20,路由器只为DMZ主机提供限制防火墙保护。路由器不会转发与主动DMZ会话匹配的TCP数据包，除非它是连接建立数据包（SYN）。除了此限制保护以外，DMZ主机是有效地“防火墙以外”。任何人考虑使用DMZ主机应该也考虑在提供额外保护的DMZ主机系统上运行防火墙。
#From:help343,Go to the Apple Menu, select System Preferences, select Network, and select the Ethernet Adapter connecting to the D-Link router. Select the Ethernet button and the Ethernet ID will be listed. This is the same as the MAC address. 
help343,点击苹果菜单，选择系统优先级，选择网络，然后选择连接到 D-Link路由器的以太网适配器。选择以太网按钮，会列出以太网ID。这和MAC地址是相同的。
#From:ss.Received,Received 
ss.Received,接收
#From:help263,Check this option to connect to the internet through Telstra BigPond Cable Broadband in Australia. Telstra BigPond provides the values for 
help263,选中此选项来通过在澳大利亚的Telstra BigPond缆线宽带连接互联网。Telstra BigPond提供数值
#From:.bsecure.free.trial,FREE 30 Day Trial 
.bsecure.free.trial,免费30天的试用期
#From:tf.FUNO,Firmware Upgrade Notification Options 
tf.FUNO,固件更新通知选项
#From:aw.sgi,Short GI 
aw.sgi,Short GI
#From:help386,Amount of time before a client will be required to re-authenticate. 
help386,要求客户端重新认证前的时间量。
#From:help254.ict,There are several connection types to choose from: Static IP, DHCP, PPPoE, PPTP, L2TP, and BigPond. If you are unsure of your connection method, please contact your Internet Service Provider. Note: If using the PPPoE option, you will need to ensure that any PPPoE client software on your computers is removed or disabled. 
help254.ict,这里有许多连接类型，可以从静态IP、DHCP、PPPoE、PPTP和L2TP中选择。如果您不确定连接方法，则请联系您的互联网服务供应商。注意：您使用PPPOE选项，则您需要确保删除或禁用在计算机上的任何PPPOE客户端软件。
#From:.aa.wiz.s5.msg1,Select the method for filtering. 
.aa.wiz.s5.msg1,选择过滤的方法。
#From:td.VPWK,Verify Password or Key 
td.VPWK,验证密码或密钥
#From:gw.gm.33,Need for Speed 3 
gw.gm.33,需要速度3
#From:gw.gm.0,Age of Empires 
gw.gm.0,帝国时代
#From:.macfilt,MAC Address Filter 
.macfilt,MAC地址过滤
#From:TA16,To use this feature, you must first have a Dynamic DNS account from one of the providers in the drop down menu. 
TA16,要使用此特征，您必须首先在下拉菜单中从其中一个供应商中选择动态DNS帐户。
#From:bd.DAB.note,(compatibility for some DHCP Clients) 
bd.DAB.note,（对于某些DHCP客户端兼容）
#From:help796,Select the kinds of events that you want to view. 
help796,选择您想查看的事件类型。
#From:tf.really?.FWF,Do you really want to reprogram the device using the firmware file 
tf.really?.FWF,您真的想使用固件文件重新调整设备程序吗？
#From:up.tz.05,(GMT-07:00) Arizona 
up.tz.05,(GMT-07:00)亚利桑那州
#From:tt.time.16,3 pm 
tt.time.16,3 pm
#From:help861,This email address will appear as the sender when you receive a log file or firmware upgrade notification via email. 
help861,当您通过电子邮件接收日志文件或固件升级通知时，此电子邮件地址将作为发送人出现。
#From:help19,Select the protocol used by the service. 
help19,选择通过服务使用的协议。
#From:bwn.DWM,DHCP WAN Mode 
bwn.DWM,DHCP WAN模式
#From:.ICMP,ICMP 
.ICMP,ICMP
#From:gw.gm.22,Half Life 
gw.gm.22,一半人生
#From:help868,Email Log When Full or on Schedule 
help868,当完成或按计划时的邮件日志
#From:.password,Password 
.password,密码
#From:tt.time.6,5 am 
tt.time.6,5 am
#From:501.12,Click this button to start creating a new access control policy. 
501.12,单击此按钮开始创建新的访问控制政策。
#From:hhac.en,Check <strong>Enable Access Control</strong> if you want to enforce rules that limit Internet access from specific LAN computers. 
hhac.en,如果您想执行从指定LAN计算机限制互联网访问的规则，则选中<strong>启用访问控制</strong>。 
#From:int.LWlsWz,Manual Configure 
int.LWlsWz,手动配置
#From:at.STR,Select Transmission Rate 
at.STR,选择传输速率
#From:tt.Aug,Aug 
tt.Aug,八月
#From:am.FM.4,Turn MAC Filtering ON and DENY computers listed to access the network 
am.FM.4,打开MAC过滤，拒绝所列出的计算机访问网络
#From:aa.wiz.s1.msg5,Step 5 - Select filters 
aa.wiz.s1.msg5,第5步-选择过滤器
#From:ACCESS_CONTROL,Access Control 
ACCESS_CONTROL,访问控制
#From:GW_DYNDNS_HERROR,Error updating dynamic DNS entry: %s. Please check configuration. Disabling DynDNS 
GW_DYNDNS_HERROR,错误更新动态DNS条目: %s。请检查配置。禁用 DynDNS
#From:sps.ports,Ports to Open 
sps.ports,打开端口
#From:help851,If you do not have the NTP Server option in effect, you can either manually set the time for your router here, or you can click the <span class="button_ref">Copy Your Computer's Time Settings</span> button to copy the time from the computer you are using. (Make sure that computer's time is set correctly.) 
help851,如果您没有有效地NTP服务器选项，则您要么手动设置路由器的时间，要么单击<span class="button_ref">复制您的计算机的时间设置</span>按钮从您正在使用的计算机复制时间。（务必确保正确地设置计算机的时间。） 
#From:hhag.20,You can select a computer from the list of DHCP clients in the <strong>Computer Name</strong> drop down menu, or you can manually enter the IP address of the LAN computer to which you would like to open the specified port. 
hhag.20,您可以在<strong>计算机名</strong>下拉菜单中从DHCP客户端列表选择计算机，或您可以手动输入您想打开哪个指定端口的LAN计算机的IP地址。
#From:aa.alert.7,This Machine rule is already used. 
aa.alert.7,此机器规则准备使用。
#From:af.DI,DMZ IP Address 
af.DI,DMZ IP地址
#From:tf.ADS,Available Download Site 
tf.ADS,可用的下载地址
#From:tsc.pingt_mesg,Ping Test sends "ping" packets to test a computer on the Internet. 
tsc.pingt_mesg,Ping测试发送“Ping”数据包以测试互联网上的计算机。
#From:sl.VLevs,View Levels 
sl.VLevs,视图等级
#From:tsc.EndTime,End Time 
tsc.EndTime,结束时间
#From:help151,A MAC address is a unique ID assigned by the manufacturer of the network adapter. 
help151,MAC地址是唯一的由网络适配器制造商分配的ID.
#From:hhta.pt,Choose a port to open for remote management. 
hhta.pt,选择打开端口用于远程管理。
#From:GW_INET_ACCESS_DROP_ACCESS_CONTROL,Internet access control dropped packet from %v to %v (protocol %u) 
GW_INET_ACCESS_DROP_ACCESS_CONTROL,互联网访问控制丢弃从%v到%v的数据包（协议 %u)
#From:ebwl.AChan,Enable Auto Channel Scan 
ebwl.AChan,启用自动信道扫描
#From:WIFISC_AP_PROXY_PROCESS_CLOSE,STA with MAC (%m) WPS process closed 
WIFISC_AP_PROXY_PROCESS_CLOSE,关闭带MAC (%m)WPS过程的STA
#From:bd.CName,Computer Name 
bd.CName,计算机名
#From:help305rt,It is recommended that you use the default settings if you do not have an existing network. 
help305rt,如果您没有现存的网络，则推荐您使用缺省设置。
#From:li.alert.3,Invalid password, please try again. 
li.alert.3,无效的密码，请再次尝试。
#From:GW_DYNDNS_UPDATE_TO,Updating dynamic DNS entry due to timeout 
GW_DYNDNS_UPDATE_TO,由于超时更新动态DNS条目
#From:tt.week.4,4th 
tt.week.4,第四
#From:tt.Day,Day 
tt.Day,天
#From:GW_LAN_CARRIER_LOST,LAN Ethernet Carrier Lost 
GW_LAN_CARRIER_LOST,LAN以太网载波丢失
#From:hhai.action,Each rule can either <strong>Allow</strong> or <strong>Deny</strong> access from the WAN. 
hhai.action,每个规则要么从WAN<strong>允许</strong>，要么从<strong>拒绝</strong>访问。
#From:help121,The Policy Wizard guides you through the steps of defining each access control policy. A policy is the "Who, What, When, and How" of access control -- whose computer will be affected by the control, what internet addresses are controlled, when will the control be in effect, and how is the control implemented. You can define multiple policies. The Policy Wizard starts when you click the button below and also when you edit an existing policy. 
help121,策略指南通过定义每个访问控制策略的步骤指导您。策略是“谁，干什么，何时和怎样”的访问控制--其计算机会受到控制的影响，控制哪些互联网地址，何时会有效控制，怎样执行此控制。您可以定义多个策略。当您点击以下按钮和当您编辑现有的策略时，策略指南开始。
#From:bwl.Intro.1,Use this section to configure the wireless settings for your D-Link Router. Please note that changes made on this section may also need to be duplicated on your Wireless Client. 
bwl.Intro.1,使用此节为您的D-Link路由器配置无线设置。请注意在此节中的改变可能也需要在无线客户端上复制。 
#From:wwa.msg.set.pppoe,To set up this connection you will need to have a Username and Password from your Internet Service Provider. If you do not have this information, please contact your ISP. 
wwa.msg.set.pppoe,要设置此连接，您需要从互联网服务供应商获得用户名和密码。您也需要L2TP IP地址。如果您没有获得此信息，请联系您的ISP。
#From:IPNAT_ICMP_BLOCKED_INGRESS_PACKET,Blocked incoming ICMP packet (ICMP type %u) from %v to %v 
IPNAT_ICMP_BLOCKED_INGRESS_PACKET,阻止ICMP数据包（ICMP类型 %u）从%v到%v的输入
#From:tf.intro.FWU2,to improve functionality and performance. 
tf.intro.FWU2,提高功能和性能。
#From:tps.enraw,Enable Raw Port Printing 
tps.enraw,启用原端口打印
#From:.bsecure.security.blurb,Security Services are a great way to protect all your PC's with a unified suite of services that are managed from any web browser. Includes Anti-Virus, Firewall, Intrusion Detection, Content Filtering, Spam Killer and Pop-up blocker. Any or all services can be selected at one low price. 
.bsecure.security.blurb,安全服务是用从任何web浏览器管理的统一的一套服务保护您的PC的好方法。包括防病毒、防火墙、入侵检测、内容过滤、删除垃圾邮件和阻止插件。可以在一个低价上选择任何或全部服务。
#From:bd.DHCP,DHCP Client List 
bd.DHCP,DHCP客户端列表
#From:help865,Enter your account for sending email. 
help865,输入发送电子邮件的帐户。
#From:wwl.s4.intro.z1,The WEP ( Wired Equivalent Privacy) key must meet one of following guildelines: 
wwl.s4.intro.z1,WEP（有线相等私密）密匙必须符合以下规则中的一个：
#From:help501,Download 
help501,下载
#From:help280,The ISP provides this parameter, if necessary. The value may be the same as the Gateway IP Address. 
help280,若需要，ISP提供此参数。值和网关IP地址相同。
#From:help775,DHCP Connection 
help775,DHCP连接
#From:.connect,Connect 
.connect,连接
#From:GW_BIGPOND_INIT,BigPond enabled 
GW_BIGPOND_INIT,启用BigPond
#From:.always,Always 
.always,一直
#From:.minutes,(minutes) 
.minutes,（分）
#From:as.IPR.b,Firewall Port 
as.IPR.b,防火墙端口
#From:gw.gm.67,eMule 
gw.gm.67,电驴
#From:GW_INET_ACCESS_DROP_BAD_PKT,Internet access control dropped bad packet from %v to %v (protocol %u) 
GW_INET_ACCESS_DROP_BAD_PKT,互联网访问控制丢弃从%v到%v的数据包（协议 %u)
#From:gw.gm.12,Dark Reign 2 
gw.gm.12,暗黑2
#From:gw.gm.25,Hexen II 
gw.gm.25,Hexen II
#From:help846,Select the starting and ending times for the change to and from daylight saving time. For example, suppose for DST Start you select Month="Oct", Week="3rd", Day="Sun" and Time="2am". This is the same as saying: "Daylight saving starts on the third Sunday of October at 2:00 AM." 
help846,选择日光节约时间的开始和结束时间。例如，您选择月=“10月”，周=“第3周”，天数=“星期天”，时间=“中午2点”，则假设开始DST。这里有相同的话：“在10月的第三个星期天的中午2点开始日光节约时间”。
#From:wps.KR37,Please select one of following configuration methods and click next to continue. 
wps.KR37,请选择以下配置中的一个，单击下一步继续。
#From:gw.gm.76,Gamespy Arcade 
gw.gm.76,Gamespy Arcade
#From:GW_LOGS_VIEWED,Log viewed by IP address %v 
GW_LOGS_VIEWED,通过IP地址 %v查看日志
#From:bws.msg.EAP,When WPA enterprise is enabled, the router uses EAP (802.1x) to authenticate clients via a remote RADIUS server. 
bws.msg.EAP,当启用WPA企业时，路由器使用EAP (802.1x)验证通过远程RADIUS服务器验证客户端。
#From:WIFISC_IR_REGISTRATION_INPROGRESS,WPS Internal Registrar started %s registration 
WIFISC_IR_REGISTRATION_INPROGRESS,WPS内部注册开始 %s 注册
#From:hhsa.intro,This is a list of all active conversations between WAN computers and LAN computers. 
hhsa.intro,这是在WAN计算机和LAN计算机间的所有主动对话列表。
#From:help856,This section allows you to archive your log files to a Syslog Server. 
help856,本节允许您把日志文件保存到系统日志服务器。
#From:sa.Dir,Dir 
sa.Dir,Dir
#From:.bln.title.IGMPMemberships,IGMP Multicast memberships 
.bln.title.IGMPMemberships,IGMP多播成员
#From:bwn.Mode.L2TP,L2TP (Username / Password) 
bwn.Mode.L2TP,L2TP（用户名/密码）
#From:.Thu,Thu 
.Thu,星期四
#From:.ping,Ping 
.ping,Ping
#From:help184,Beacons are packets sent by a wireless router to synchronize wireless devices. Specify a Beacon Period value between 20 and 1000. The default value is set to 100 milliseconds. 
help184,信号是通过无线路由器发送的数据包以使无线设备同步。在20到1000间指定信号期间值。缺省值设置为100毫秒。
#From:.worksbest,Select the option that works best for your installation. 
.worksbest,选择工作最适合安装的选项。
#From:.unavailable,unavailable 
.unavailable,不可获得
#From:IPFAT_INCOMPATIBLE_FILESYS,Detected file system is not compatible (FAT32,FAT16,FAT12) 
IPFAT_INCOMPATIBLE_FILESYS,检测文件系统是不兼容的（FAT32,FAT16,FAT12）
#From:IPNAT_TCP_BLOCKED_INGRESS_NOT_SYN,Blocked incoming TCP packet from %v:%u to %v:%u as %s received but there is no active connection 
IPNAT_TCP_BLOCKED_INGRESS_NOT_SYN,阻塞输出TCP数据包，从%v:%u to %v:%u，%s已接收，但是没有活动的连接。
#From:up.tz.04,(GMT-08:00) Pacific Time (US/Canada), Tijuana 
up.tz.04,(GMT-08:00)太平洋时间（美国/加拿大）,提花纳
#From:sl.ApplySt,Apply Log Settings Now 
sl.ApplySt,现在应用日志设置
#From:IPPPPCHAP_CHALLENGE_RECVD,CHAP authentication challenge received from peer. 
IPPPPCHAP_CHALLENGE_RECVD,CHAP验证挑战从对等接收。
#From:help141,This section is where you add the Web sites to be used for Access Control. 
help141,本节是您添加Web网站的章节，用于访问控制。
#From:bd.Revoke,Revoke 
bd.Revoke,取消
#From:wprn.intro3,Step 1: Detect the printer 
wprn.intro3,第1步：检测打印机
#From:.conuptime,Connection Up Time 
.conuptime,向上连接时间
#From:wprn.tt4,Verify that the printer is turned on. 
wprn.tt4,验证是否打开打印机
#From:help383,Wireless Networking technology enables ubiquitous communication 
help383,无线网络技术启用无所不在的通信
#From:tsc.pingt.msg6,No response to ping from router, will retry. 
tsc.pingt.msg6,来自路由器的ping测试无响应，则重试。
#From:help821a,Initiated from LAN to WAN. 
help821a,从LAN到WAN开始
#From:PPPOE_EVENT_SESSION_OFFER_RECVD,PPPoE received session offer 
PPPOE_EVENT_SESSION_OFFER_RECVD,接收的PPPOE会话提供
#From:gw.gm.30,Myth 
gw.gm.30,Myth
#From:bi.man,If you consider yourself an advanced user and have configured a router before, click <span class="button_ref">Manual Configure</span> to input all the settings manually. 
bi.man,如果您认为您自己是高级用户，并且以前配置过路由器，则单击 <span class="button_ref">手动配置</span>以手动输入所有设置。
#From:help60,Mixed (1020-5000, 689) 
help60,混合（1020-5000，689）
#From:ta.RAP,Remote Admin Port 
ta.RAP,远程管理端口
#From:bwn.Mode.BigPond,BigPond (Australia) 
bwn.Mode.BigPond,BigPond（澳大利亚）
#From:wprn.cps2,The current printer status will result in the test page failing to print later in the setup process. 
wprn.cps2,当前的打印机状态会造成测试页在以后的打印设置过程中失败。
#From:tt.dststart,DST Start 
tt.dststart,DST开始
#From:help164.1,When the protocol is TCP, SPI checks that packet sequence numbers are within the valid range for the session, discarding those packets that do not have valid sequence numbers. 
help164.1,当协议是TCP时，SPI检查数据包顺序号是否在对话的有效范围内，丢弃那些没有有效顺序号的数据包。
#From:IPMSCHAP_AUTH_TIMEOUT,MSCHAP authentication timed out - authentication failed. 
IPMSCHAP_AUTH_TIMEOUT,MSCHAP验证超时-验证失败。
#From:sl.emailLog,Email Now 
sl.emailLog,当前的邮件
#From:bwl.title.1,Wireless Network Settings 
bwl.title.1,无线网络设置
#From:bwn.BPP,BigPond Password 
bwn.BPP,BigPond密码
#From:sl.reload,Refresh 
sl.reload,刷新
#From:wwl.title.s1,Step 1: Name your Wireless Network 
wwl.title.s1,第1步：为您的无线网络取名
#From:IPDRIVE_MOUNT_FAILED,Failed to mount drive device 
IPDRIVE_MOUNT_FAILED,不能安装驱动设备
#From:int.ConWz,Internet Connection Setup Wizard 
int.ConWz,互联网连接设置指南
#From:help178,Permit any WAN user to access the related capability. 
help178,允许任何WAN用户访问有关的能力。
#From:help329,The <code>Revoke</code> option is available for the situation in which the lease table becomes full or nearly full, you need to recover space in the table for new entries, and you know that some of the currently allocated leases are no longer needed. Clicking <code>Revoke</code> cancels the lease for a specific LAN device and frees an entry in the lease table. Do this only if the device no longer needs the leased IP address, because, for example, it has been removed from the network. 
help329, <code>取消</code>选项用于租借表变满或几乎满的情况，您需要恢复表中的空间，用于新条目，而且您知道当前分配的一些租借不再需要。单击<code>取消</code>取消指定LAN设备的租借，并在租借表中使条目空闲。如果设备不再需要租借的IP地址，则只有这样做，因为比如从网络删除。 
#From:IPL2TP_TUNNEL_DISCONNECTED,L2TP local tunnel 0x%04X has been disconnected 
IPL2TP_TUNNEL_DISCONNECTED,L2TP本地隧道0x%04X中断
#From:help830,Remote Admin Inbound Filter 
help830,远程Admin带内过滤器 
#From:help294,The Maximum Transmission Unit (MTU) is a parameter that determines the largest packet size (in bytes) that the router will send to the WAN. If LAN devices send larger packets, the router will break them into smaller packets. Ideally, you should set this to match the MTU of the connection to your ISP. Typical values are 1500 bytes for an Ethernet connection and 1492 bytes for a PPPoE connection. If the router's MTU is set too high, packets will be fragmented downstream. If the router's MTU is set too low, the router will fragment packets unnecessarily and in extreme cases may be unable to establish some connections. In either case, network performance can suffer. 
help294,最大传输单元（MTU）是一个参数，决定路由器发送到WAN的最大数据包尺寸（单位字节）。如果LAN设备发送较大的数据包，则路由器把它们分成较小的数据包。现实中，您应用设置它以使MTU连接与您的ISP匹配。以太网连接的典型值是1500字节，而PPPOE连接是1492字节。如果路由器的MTU设置的太高，则数据包会在下游分散。如果路由器的MTU设置太低，则路由器不必要分散数据包，在极限的情况下不可能建立一些连接。在任一情况下，网络性能可能损害。
#From:up.tz.21,(GMT-02:00) Mid-Atlantic 
up.tz.21,(GMT-02:00) 中大西洋
#From:tf.LFWD,Latest Firmware Date 
tf.LFWD,最新的固件日期
#From:GW_BIGPOND_SUCCESS,BigPond logged in, state=%d, server response=%s 
GW_BIGPOND_SUCCESS,BigPond登录,状态=%d, 服务器响应=%s 
#From:.denyall,Deny All 
.denyall,拒绝全部
#From:at.AC,Automatic Classification 
at.AC,自动分类
#From:bwl.VS,Visibility Status 
bwl.VS,可见度状态
#From:help327,In this section you can see what LAN devices are currently leasing IP addresses. 
help327,在本节中，您可以查看当前LAN设备正在租用的IP地址。
#From:wprn.s2a,To complete the setup process, the wizard will now launch an executable file on your computer. 
wprn.s2a,要完成设置过程，现在指南会在您的计算机上发布一个可执行的文件。
#From:td.,(hours) 
td.,小时
#From:PPTP_EVENT_TUNNEL_WINDOW_TIMEOUT,The remote PPTP access concentrator is slow to respond. There may be connectivity problems. 
PPTP_EVENT_TUNNEL_WINDOW_TIMEOUT,远程PPTP访问集中器响应慢。这可能是连接问题。
#From:aw.TP,Transmit Power 
aw.TP,传输功耗
#From:bwn.SIAICT,Static IP Address Internet Connection Type 
bwn.SIAICT,静态IP地址互联网连接类型
#From:help57,Multiple connections are required by some applications, such as internet games, video conferencing, Internet telephony, and others. These applications have difficulties working through NAT (Network Address Translation). This section is used to open multiple ports or a range of ports in your router and redirect data through those ports to a single PC on your network. You can enter ports in various formats: 
help57,多种连接受到一些应用的要求，比如互联网游戏、视频会议、互联网电话和其它。这些应用很难通过NAT（网络地址转换）工作。本节用于打开多个端口或您路由器上的端口范围，并通过那些端口重新把数据发送到网络上的单独PC。您可以以各种形式输入端口：
#From:bd.EDSv,Enable DHCP Server 
bd.EDSv,启用DHCP服务器
#From:.sdi.s5,Disconnecting (please wait...) 
.sdi.s5,未连接（请等待....）
#From:wprn.man,Manufacturer 
wprn.man,制造商
#From:tt.time.3,2 am 
tt.time.3,2 am
#From:bwn.note.clientSW,If using the PPPoE option, you will need to remove or disable any PPPoE client software on your computers. 
bwn.note.clientSW,如果使用PPPOE选项，则您需要删除或禁用计算机上的PPPOE客户端软件。
#From:up.tz.20,(GMT-03:00) Greenland 
up.tz.20,(GMT-03:00)格陵兰
#From:RIP_LOW_RESOURCES,RIP has rejected route %v from peer router %v due to low system resources 
RIP_LOW_RESOURCES,由于低系统资源，RIP拒绝来自对等路由器%v的路线 %v 
#From:help266,Service Name: 
help266,服务名：
#From:CONNECTED,Connected 
CONNECTED,连接
#From:help265.5,If your ISP has assigned a fixed IP address, select this option. The ISP provides the values for the following fields: 
help265.5,如果您的ISP分配固定的IP地址，则选择此选项。ISP提供以下字段的数值：
#From:tsc.Days,Day(s) 
tsc.Days,天
#From:up.tz.13,(GMT-05:00) Indiana (East) 
up.tz.13,(GMT-05:00)印第安娜（东部)
#From:sd.General,General 
sd.General,一般
#From:hhan.upnp,UPnP helps other UPnP LAN hosts interoperate with the router. Leave the UPnP option enabled as long as the LAN has other UPnP applications. 
hhan.upnp,UPnP帮助其它和路由器相互合作的UPnP LAN主机。只要LAN有其它UPnP应用，则启用UPnP选项。 
#From:help35,Check with the system administrator of your corporate network whether your VPN client supports NAT traversal. 
help35,和您公司的网络系统管理员检查您的VPN客户端是否支持NAT通过
#From:help18,The IP address of the system on your internal network that will provide the virtual service, for example <code>192.168.0.50</code>. 
help18,在您的内部网络上的系统IP地址提供虚拟服务，比如<code>192.168.0.50</code>
#From:bwz.psw,Printer Setup Wizard 
bwz.psw,打印机设置指南
#From:tt.DaT,Date And Time 
tt.DaT,日期和时间
#From:help190,Schedules can be created for use with enforcing rules. For example, if you want to restrict web access to Mon-Fri from 3pm to 8pm, you could create a schedule selecting Mon, Tue, Wed, Thu, and Fri and enter a Start Time of 3pm and End Time of 8pm. 
help190,可以创建计划表和强迫规则一起使用。比如，如果您想限制web访问从星期一到星期五从下午3点到下午7点，则您可以创建计划表，选择星期一，星期二，星期三，星期四和星期五，然后输入下午3点的开始时间和下午8点的结束时间。
#From:help819.2,SYN Sent -- One of the systems is attempting to start a connection. 
help819.2,SYN发送-所有系统中的一个系统尝试开始连接。
#From:bwn.MIT,Maximum Idle Time 
bwn.MIT,最大闲置时间
#From:hhai.name,Give each rule a <strong>Name</strong> that is meaningful to you. 
hhai.name,指定每个规则 <strong>名</strong>对您有意义。
#From:te..title.EmLog,Email log when FULL or on Schedule 
te..title.EmLog,当完成或按计划时的邮件日志
#From:up.tz.47,(GMT+05:30) Calcutta, Chennai, Mumbai, New Delhi 
up.tz.47,(GMT+05:30)加尔各答，Chennai, Mumbai,新德里
#From:IPSMTPCLIENT_DIALOG_FAILED,SMTP failed during sender/recipient dialog 
IPSMTPCLIENT_DIALOG_FAILED,在发送者/接受者对话期间，SMTP失败
#From:hham.del,Click the <strong>Clear</strong> button to remove the MAC address from the MAC Filtering list. 
hham.del,单击<strong>清除</strong>按钮以从MAC过滤列表删除MAC地址。
#From:wwa.msg.ispnot,If your Internet Service Provider was not listed or you don't know who it is, please select the Internet connection type below: 
wwa.msg.ispnot,如果没有列出您的互联网服务供应商或您不知道供应商是谁，请选择以下的互联网连接类型：
#From:help808,The number of packets that were dropped while being sent, due to errors, collisions, or router resource limitations. 
help808,当发送时由于错误、冲突或路由器资源限制丢弃的数据包数目。
#From:PPTP_EVENT_TUNNEL_ESTABLISH_REQUEST,Attempting to establish a PPTP connection. 
PPTP_EVENT_TUNNEL_ESTABLISH_REQUEST,尝试建立PPTP连接。
#From:help37,Supports use on LAN computers of Microsoft Windows Messenger (the Internet messaging client that ships with Microsoft Windows) and MSN Messenger. The SIP ALG must also be enabled when the Windows Messenger ALG is enabled. 
help37,支持Microsoft Windows Messenger（互联网信息客户端和Microsoft Windows一起装船)的LAN计算机和MSN Messenger上使用。当启用 Windows Messenger ALG 时，也必须启用SIP ALG。
#From:WCN_LOG_REBOOT,Reboot requested for WCN 
WCN_LOG_REBOOT,根据WCN的要求重启
#From:PPTP_EVENT_TUNNEL_CONNECT_FAIL,PPTP connection attempt failed. Check remote PPTP server details. 
PPTP_EVENT_TUNNEL_CONNECT_FAIL,PPTP连接试图失败。检查远程PPTP服务器详细信息。
#From:bwl.CWM,Channel Width 
bwl.CWM,信道宽度
#From:up.tz.12,(GMT-05:00) Eastern Time (US/Canada) 
up.tz.12,(GMT-05:00)东部时间（美国/加拿大）
#From:.cancel,Cancel 
.cancel,取消
#From:ta.EUPNP,Enable UPnP 
ta.EUPNP,启用 UPnP
#From:bln.EnDNSRelay,Enable DNS Relay 
bln.EnDNSRelay,启用DNS中继
#From:up.tz.38,(GMT+03:00) Kuwait, Riyadh 
up.tz.38,(GMT+03:00)科威特，利雅得
#From:aw.DI,DTIM Interval 
aw.DI,DTIM间隔时间
#From:up.tz.31,(GMT+02:00) Athens, Istanbul, Minsk 
up.tz.31,(GMT+02:00) 雅典，伊斯坦布尔，明斯克
#From:hhai.delete,Click the <strong>Delete</strong> icon in the Rules List to permanently remove a rule. 
hhai.delete,单击规则列表中的<strong>删除</strong>图标以永久删除规则 
#From:av.intro.vs,The Virtual Server option allows you to define a single public port on your router for redirection to an internal LAN IP Address and Private LAN port if required. This feature is useful for hosting online services such as FTP or Web Servers. 
av.intro.vs,虚拟服务器选项允许您定义路由器上的单独公共端口，如果要求，便于重新定向内部LAN IP地址和私人LAN端口。此特征用于主持在线服务，比如FTP或Web服务器。
#From:GW_WAN_RECONNECT_ALWAYS_ON,Attempting to re-connect always-on WAN connection 
GW_WAN_RECONNECT_ALWAYS_ON,尝试重新连接always-onWAN连接
#From:wwl.WSP,Wireless Security Password 
wwl.WSP,无线安全密码
#From:INGRESS,In 
INGRESS,在
#From:RESTRICTED,Restricted 
RESTRICTED,限制
#From:bwn.msg.DHCPDesc,Use this Internet connection type if your Internet Service Provider (ISP) didn't provide you with IP Address information and/or a username and password. 
bwn.msg.DHCPDesc,如果您的互联网供应商（ISP）没有为您提供IP地址信息和/或用户名和密码，则使用此互联网连接类型。
#From:help390,The port number used to connect to the authentication server. 
help390,端口号用于连接验证服务器。
#From:help828,Enabling Remote Management allows you to manage the router from anywhere on the Internet. Disabling Remote Management allows you to manage the router only from computers on your LAN. 
help828,启用远程管理允许您管理互联网上任何地方的路由器。禁用远程管理允许您管理只来自您的LAN计算机上的路由器。
#From:help867,Re-type the password associated with the account. 
help867,重新输入和帐户有关的密码。
#From:GW_WAN_CONNECT_ALWAYS_ON,Attempting to start always-on WAN connection 
GW_WAN_CONNECT_ALWAYS_ON,尝试开始 always-on WAN连接
#From:IPRTSPALG_REJECTED_ODD_RTP_PACKET,RTSP ALG rejected packet from %v:%u to %v:%u with odd RTP port %u 
IPRTSPALG_REJECTED_ODD_RTP_PACKET,RTSP ALG拒绝从 %v:%u到%v:%u的数据包和奇数RTP端口%u
#From:help60f,Port Forwarding Fields 
help60f,端口转发字段
#From:gw.gm.10,Counter Strike 
gw.gm.10,反击
#From:bwn.min,(minutes, 0=infinite) 
bwn.min,（分钟，0=无限）
#From:tt.Month,Month 
tt.Month,月
#From:wwz.wpa.support,Use WPA encryption instead of WEP(WPA is stronger than WEP and all D-Link wireless client adapters support WPA) 
wwz.wpa.support,使用WPA加密代替WEP（WPA强于WEP，而且所有D-Link无线客户端适配器支持WPA) 
#From:tf.CFWD,Current Firmware Date 
tf.CFWD,当前的固件日期
#From:.advnetwork,Advanced Network 
.advnetwork,高级网络
#From:bwn.PPPOEICT,PPPOE Internet Connection Type 
bwn.PPPOEICT,PPPOE互联网连接类型
#From:help389,RADIUS Server Port: 
help389,RADIUS服务器端口
#From:help844,Select the time offset, if your location observes daylight saving time. 
help844,如果您的位置观察日光节约时间，则选择时间偏移
#From:tt.time.17,4 pm 
tt.time.17,4 pm
#From:help284,L2TP (Layer Two Tunneling Protocol) uses a virtual private network to connect to your ISP. This method of connection requires you to enter a <span class="option">Username</span> and <span class="option">Password</span> (provided by your Internet Service Provider) to gain access to the Internet. 
help284,L2TP（2层隧道协议）使用虚拟私人网络连接到您的ISP。此连接方法要求您输入<span class="option">用户名</span>和 <span class="option">密码</span>（由您的互联网服务供应商提供）来获得访问互联网。
#From:GW_WIRELESS_DEVICE_ASSOCIATED,Wireless system with MAC address %m associated 
GW_WIRELESS_DEVICE_ASSOCIATED,带有关MAC地址%m 的无线系统
#From:bws.2RMAA,Second MAC Address Authentication 
bws.2RMAA,备用MAC地址认证
#From:as.SIP,SIP 
as.SIP,SIP
#From:help704,Syslog 
help704,系统日志
#From:WIFISC_IR_REGISTRATION_FAIL_1,WPS Internal Registrar failed to add new station, reason %s 
WIFISC_IR_REGISTRATION_FAIL_1,添加新站的WPS内部注册失败，原因%s
#From:up.tz.25,(GMT) Greenwich Time: Dublin, Edinburgh, Lisbon, London 
up.tz.25,(GMT)格林威治时间：都柏林,爱丁堡,里斯本,伦敦
#From:help55,With the above example application rule enabled, the router will open up a range of ports from 6000-6200 for incoming traffic from the Internet, whenever any computer on the internal network opens up an application that sends data to the Internet using a port in the range of 6500-6700. 
help55,通过启用以上例子的应用规则，路由器打开，端口范围从6000到6200，用于来自互联网的输入流量，无论何时打开内部网络上的任何计算机，把数据发送到互联网的应用程序使用范围从6500到6700的端口。
#From:GW_WLAN_LINK_UP,Wireless Link is up 
GW_WLAN_LINK_UP,无线连接上行
#From:td.EnDDNS,Enable Dynamic DNS 
td.EnDDNS,启用动态DNS
#From:ai.title.IFR,Inbound Filter Rule 
ai.title.IFR,带内过滤器规则
#From:.PPTP,PPTP 
.PPTP,PPTP
#From:.both,Both 
.both,全部
#From:up.tz.40,(GMT+03:00) Nairobi 
up.tz.40,(GMT+03:00)奈落比
#From:wprn.tt8,Unplug and reinsert the printer's USB cable. 
wprn.tt8,拔掉和重新插入打印机的USB缆线
#From:tps.dsr,Disable Soft Reset 
tps.dsr,禁用软复位
#From:.aa.other.machines,Other Machines 
.aa.other.machines,其它机器
#From:help875,This restarts the router. Useful for restarting when you are not near the device. 
help875,重启路由器。当您不在设备附近时，用于重启。
#From:awsf.p,Website Filter Parameters 
awsf.p,网站过滤器参数
#From:wwl.s4.intro.z2,- Exactly 5 or 13 characters 
wwl.s4.intro.z2,准确地是5个或13个字符
#From:wwa.set.l2tp.msg,To set up this connection you will need to have a Username and Password from your Internet Service Provider. You also need L2TP IP adress. If you do not have this information, please contact your ISP. 
wwa.set.l2tp.msg,要设置此连接，您需要从互联网服务供应商获得用户名和密码。您也需要L2TP IP地址。如果您没有获得此信息，请联系您的ISP。
#From:up.tz.42,(GMT+04:00) Abu Dhabi, Muscat 
up.tz.42,(GMT+04:00)阿布扎比,马斯卡特
#From:.error,Error 
.error,错误
#From:aa.FPR.c4,Dest IP<br />End 
aa.FPR.c4,目的地IP<br />结束
#From:help75a,Enable or disable defined rules with the checkboxes at the left. 
help75a,用左边的复选框启用或禁用定义规则。
#From:network.dhcp.ip.in.server,Invalid LAN IP Address, ip address in DHCP Server range 
network.dhcp.ip.in.server,无效的LAN IP地址，DHCP服务器范围中的IP地址。
#From:tf.msg.wired,To upgrade the firmware, your PC must have a wired connection to the router. Enter the name of the firmware upgrade file, and click on the Upload button. 
tf.msg.wired,要升级固件，您的PC必须和路由器有线连接。输入固件升级文件名，并单击上传按钮。
#From:wwa.title.set.pppoe,Set Username and Password Connection (PPPoE) 
wwa.title.set.pppoe,设置用户名和密码连接（PPPoE)
#From:tsc.pingt.msg1,Enter a host name or IP address above and click 'Ping' 
tsc.pingt.msg1,输入以上的主机名或IP地址，并单击‘Ping'。
#From:bwl.CWM.h2,The other options are available for special circumstances. 
bwl.CWM.h2,其它选项用于特殊情况。
#From:dlink.1.add.new,Add New 
dlink.1.add.new,添加新建
#From:help884,Check Online 
help884,在线检查
#From:rb.Rebooting,Rebooting 
rb.Rebooting,重启
#From:help819.6,Time Wait -- Waiting for a short time while a connection that was in FIN Wait is fully closed. 
help819.6,时间等待-当完全关闭FIN等待中的连接时，等待很短的一段时间。
#From:tt.time.10,9 am 
tt.time.10,9 am
#From:help199,This section shows the currently defined Schedule Rules. A Schedule Rule can be changed by clicking the Edit icon, or deleted by clicking the Delete icon. When you click the Edit icon, the item is highlighted, and the "Edit Schedule Rule" section is activated for editing. 
help199,本节表明当前定义的计划表规则。通过单击编辑图标改变计划表规则或单击删除图标删除。当您单击编辑图标时，突出选项，而“编辑计划表规则”用于编辑。
#From:help259,A method of connection where the ISP assigns your IP address when your router requests one from the ISP's server. Some ISP's require you to make some settings on your side before your router can connect to the Internet. 
help259,ISP分配IP地址的连接方法，当您的路由器要求从ISP的服务器获得一个IP地址时，在您的路由器连接到互联网前，一些ISP要求您在您旁边配置某些设置。
#From:af.algconfig,Application Level Gateway (ALG) Configuration 
af.algconfig,应用 水平网关（ALG）配置
#From:wwa.msg.pptp,PPTP client. 
wwa.msg.pptp,生产前试验的程序客户机
#From:bws.2RIPA,Second RADIUS server IP Address 
bws.2RIPA,第二远程用户拨号认证系统服务器 IP地址
#From:.aa.wiz.s4.title,Step 3: Select Machine 
.aa.wiz.s4.title,步骤3 ：选择机器
#From:wwa.note.svcn,Note: You may also need to provide a Service Name. If you do not have or know this information, please contact your ISP. 
wwa.note.svcn,注释：你也需要提供一服务名。如果你没有或不知道这些信息，请联系你的英特网服务供应商。
#From:help85,Detected xDSL or Frame Relay Network 
help85,"被探测到的数字用户线路或帧中继网络
#From:help304,If you need to change the MAC address of the router's WAN-side Ethernet interface, either type in an alternate MAC address (for example, the MAC address of the router initially connected to the ISP) or copy the MAC address of a PC. To copy the MAC address of the computer that initially connected to the ISP, connect to the D-Link router using that computer and click the <span class="button_ref">Clone Your PC's MAC Address</span> button. The WAN interface will then use the MAC address of the network adapter in your computer. 
help304,如果你需要改变路由器广域网以太网界面的媒体访问控制子层协议地址，要么在一个交替的媒体访问控制子层协议地址上打出（比如，路由器的媒体访问控制子层协议地址主动的连接到英特网服务供应商），要么拷贝一电脑上的媒体访问控制子层协议地址。为了复制主动连接到英特网服务供应商的电脑媒体访问控制子层协议地址，使用电脑连接到D-link路由器，并点击<span class="button_ref">克隆你的电脑媒体访问控制子层协议地址</span> 按钮。广域网界面然后将使用你电脑上的网络适配器的媒体访问控制子层协议地址。
#From:GW_INET_ACCESS_DROP_PORT_FILTER_WITH_PORT,Internet access port filter dropped packet from %v:%u to %v:%u (protocol %u) 
GW_INET_ACCESS_DROP_PORT_FILTER_WITH_PORT,"英特网访问端口过滤器从%v:%u到%v:%u（协议%u）过滤信息包.
#From:sd.BPSt,BigPond Status 
sd.BPSt,BigPond 状态
#From:up.tz.49,(GMT+06:00) Almaty, Novosibirsk 
up.tz.49,(GMT+06:00)Almaty，新西伯利亚
#From:gw.gm.62,World of Warcraft 
gw.gm.62,魔兽世界
#From:BIGPOND_LOGGED_OUT,BigPond logged out 
BIGPOND_LOGGED_OUT,BigPond退出登陆
#From:tf.EmNew,Email Notification of Newer Firmware Version 
tf.EmNew,更新的固件版本的电子邮件通知
#From:GW_INET_ACCESS_INITIAL_MAC_FAIL,Internet access policy for MAC address %m cannot be set 
GW_INET_ACCESS_INITIAL_MAC_FAIL,用于媒体访问控制子层协议地址%m的英特网访问不能被设定
#From:help303,MAC Address: 
help303,媒体访问控制子层协议地址
#From:wwa.selectisp.not,Not Listed or Don't Know 
wwa.selectisp.not,不能被列出或者不知道
#From:IPNAT_TCP_BLOCKED_EGRESS_BAD_ACK,Blocked outgoing TCP packet from %v:%u to %v:%u with unexpected acknowledgement %lu (expected %lu to %lu) 
IPNAT_TCP_BLOCKED_EGRESS_BAD_ACK,阻止来自%v:%u 到%v:%u带有未预知的确认%lu的输出传输控制协议信息包（%lu 到%lu为预知的）
#From:help94,The rule applies to a flow of messages whose LAN-side port number is within the range set here. 
help94,法则应用于包含在范围设置里的局域网端口数字的信息流。
#From:gw.gm.70,Xbox Live 
gw.gm.70,实况Xbox
#From:IPNAT_ICMP_UNABLE_TO_HANDLE_HEADER,Dropped ICMP packet from %v to %v as unable handle packet header 
IPNAT_ICMP_UNABLE_TO_HANDLE_HEADER,当不能处理信息包头时，从%v到%v过滤网间控制报文协议信息包
#From:.FTP,FTP 
.FTP,文件传送输协议
#From:.neft,NAT Endpoint Filtering 
.neft,NAT 端点过滤
#From:ta.A12n,Administration 
ta.A12n,行政部门
#From:gw.gm.83,D-Link DVC-1000 
gw.gm.83,D-Link DVC-1000
#From:GW_BIGPOND_LOGOUT,BigPond logged out 
GW_BIGPOND_LOGOUT,BigPond 退出登陆
#From:help46,An application rule is used to open single or multiple ports on your router when the router senses data sent to the Internet on a "trigger" port or port range. An application rule applies to all computers on your internal network. 
help46,当路由器感应到数据传送到在“触发”端口或端口范围时，应用程序法则被用来打开在路由器上的单一或多个端口。一个应用程序法则应用在你的内部网上所有电脑。
#From:hhsl.intro,Check the log frequently to detect unauthorized network usage. 
hhsl.intro,经常检查你的日志来探测为授权的网络用法。
#From:help770,Tools Help 
help770,工具帮助
#From:wwa.msg.set.pptp,To set up this connection you will need to have a Username and Password from your Internet Service Provider. You also need PPTP IP adress. If you do not have this information, please contact your ISP. 
wwa.msg.set.pptp,为了安装连接，你将需要来自你的英特网服务供应商的用户名＆密码。你也将需要生产前试验的程序IP地址。如果你不需要这些信息，请联系你的英特网服务供应商。
#From:GW_FW_NOTIFY_FAILED_DNS,Unable to find DNS record for firmware upgrade server %s 
GW_FW_NOTIFY_FAILED_DNS,不能找到用于固件升级服务器%s的域名服务器记录  
#From:gw.gm.40,Rainbow Six: Raven Shield 
gw.gm.40,彩虹6 ：乌鸦盾
#From:bln.IGMP.title.h,The router uses the IGMP protocol to support efficient multicasting -- transmission of identical content, such as multimedia, from a source to a number of recipients. 
bln.IGMP.title.h,路由器使用IGMP 协议来支持有效地多点传送——同样内容的传输，如从一个资源到许多个收件人的多媒体。
#From:hhaw.11d,Use <strong>802.11d</strong> only for countries where it is required. 
hhaw.11d,使用只用于需要国家的<strong>802.11d</strong>。
#From:up.jt.2,If not, press Cancel and then click Save Settings. 
up.jt.2,如果不是，点击取消然后点击保存设定。
#From:GW_INET_ACCESS_POLICY_START_MAC,Policy %s started; Internet access for MAC address %s changed to: %s 
GW_INET_ACCESS_POLICY_START_MAC,%s 方针启动；用于媒体访问控制子层协议地址%s的英特网访问更改为：%s
#From:wwa.msg.pppoe,Choose this option if your Internet connection requires a username and password to get online. Most DSL modems use this type of connection. 
wwa.msg.pppoe,如果你的英特网连接需要一个用户名＆密码来上线时，选择这个选项。大多数深散射层调制解调器使用这种连接。
#From:help323,Suppose you configure the DHCP Server to manage addresses From 192.168.0.100 To 192.168.0.199. This means that 192.168.0.3 to 192.168.0.99 and 192.168.0.200 to 192.168.0.254 are NOT managed by the DHCP Server. Computers or devices that use addresses from these ranges are to be manually configured. Suppose you have a web server computer that has a manually configured address of 192.168.0.100. Because this falls within the "managed range" be sure to create a reservation for this address and match it to the relevant computer (see <a href="#Static_DHCP">Static DHCP Client</a> below). 
help323,你假设你配置动态主机配置协议服务器来管理从192.168.0.100 到192.168.0.199的地址，这意味着从192. 168.0.3 到92.168.0.99 和192.168.0.200 到192.168.0.254不由动态主机配置协议服务器来分配。使用来自这些范围的地址的电脑或设备将被手动地被配置。假设你有一个手动配置的192.168.0.100地址的网络服务器电脑。这是因为这属于“被处理的范围”以确定建立用于这个地址的保留，并使它于相关的电脑相配(观察上面的<a href="#Static_DHCP">静态动态主机配置协议客户机</a>)。
#From:ta.intro1,The 'admin' and 'user' accounts can access the management interface. The admin has read/write access and can change passwords, while the user has read-only access. 
ta.intro1,admin' 和 'user'帐号能访问管理界面。Admin为读/写访问，并能改变密码，同时用户为只读访问。
#From:tt.week.3,3rd 
tt.week.3,第三
#From:.dhcpsrv,DHCP Server 
.dhcpsrv,动态主机配置协议服务器
#From:Dynamic_PPPoE,Dynamic IP 
Dynamic_PPPoE,动态IP
#From:.enabled,Enabled 
.enabled,启用
#From:GW_DHCP_SERVER_WINS_MODE_INVALID,WINS/NetBIOS may not operate in this mode given your Internet connection settings. 
GW_DHCP_SERVER_WINS_MODE_INVALID,WINS/NetBIOS在你的英特网连接设定所给予的模式下不能被启动。
#From:GW_INET_ACCESS_RESTRICTED,One or more Internet access policies are in effect. Internet access will be restricted according to these policies 
GW_INET_ACCESS_RESTRICTED,一个或更多的英特网访问法则能起作用。英特网将根据这些法则被限制。
#From:gw.gm.69,WON Servers 
gw.gm.69,WON 服务器
#From:aa.ACR.c5,Filtering 
aa.ACR.c5,过滤
#From:help331,This option lets you reserve IP addresses, and assign the same IP address to the network device with the specified MAC address any time it requests an IP address. This is almost the same as when a device has a static IP address except that the device must still request an IP address from the D-Link router. The D-Link router will provide the device the same IP address every time. DHCP Reservations are helpful for server computers on the local network that are hosting applications such as Web and FTP. Servers on your network should either use a static IP address or use this option. 
help331,这选项让你保留IP地址，并在任意时间你要求一个IP地址的情况下分配一个相同的IP地址到带有特定的媒体访问控制子层协议地址的网络设备。这和当一个设备除了仍然从D-link 路由器要求一IP地址外用有一静态IP地址的情况几乎一样。D－Link 路由器每次将提供一个设备相同的IP地址。动态主机配置协议用于主导如环球网或文件传输协议应用的本地网络的服务器电脑是有帮助的。
#From:bwz.note.WlsWz,Some changes made using this Setup Wizard may require you to change some settings on your wireless client adapters so they can still connect to the D-Link Router. 
bwz.note.WlsWz,一些使用安装向导而做的改变可能要求你在你的无线客户适配器上改变一些设置，以便让他们仍然于D-ink连接。
#From:help345,You can assign a name for each computer that is given a reserved IP address. This may help you keep track of which computers are assigned this way. 
help345,你能给每个给予一个保留IP地址的电脑一个名字。这将帮助你了解那台电脑以这种方法被分配。
#From:hhav.name,Check the <strong>Application Name</strong> drop down menu for a list of predefined server types. If you select one of the predefined server types, click the arrow button next to the drop down menu to fill out the corresponding field. 
hhav.name,检验用于一列预定义的服务器类型的<strong>应用程序名称下拉菜单。如果你选择其中一个预定义的服务器类型，点击靠近下拉菜单的箭头按钮来填写相关的领域。
#From:av.PriP,Private Port 
av.PriP,私人端口
#From:tsc.pingt.msg103,% loss 
tsc.pingt.msg103,% 缺失
#From:help.upnp.2,If you need to use the UPnP functionality, you can enable it here. 
help.upnp.2,如果你想功能性的使用即插即用，你能在那启动它。
#From:WAN_MODE_INCORRECT,Incorrect WAN connectivity mode 
WAN_MODE_INCORRECT,错误的局域网连接模式
#From:wwl.alert.pv5.2_5,WEP password must be exactly 5 alphanumeric characters. 
wwl.alert.pv5.2_5,WEP 密码必须时5个文字数字式字符。
#From:.aa.wiz.s5.title,Step 4: Select Filtering Method 
.aa.wiz.s5.title,步骤4： 选择过滤方法
#From:KR22.ww,Invalid PIN number. 
KR22.ww,有效地PIN数字
#From:.aa.wiz.s7.help,Specify rules to prohibit access to specific IP addresses and ports. 
.aa.wiz.s7.help,具体说明法则来禁止访问具体的IP地址和端口
#From:IPL2TP_SEQUENCING_DEACTIVATED,L2TP session server stopped sending sequencing numbers for local session 0x%04X 
IPL2TP_SEQUENCING_DEACTIVATED,L2TP通用任务程序服务器阻止发送用于本地通用任务程序0x%04X有先后顺序的数字。
#From:tps.apc,Advanced Printer Configuration 
tps.apc,高级打印设置
#From:up.tz.09,(GMT-06:00) Mexico City 
up.tz.09,(GMT-06:00)墨西哥城
#From:tt.Jul,Jul 
tt.Jul,七月
#From:GW_WAN_INTERFACE_DOWN,WAN interface is down 
GW_WAN_INTERFACE_DOWN,局域网界面被关闭
#From:WCN_LOG_RESTORE,Restore wireless settings 
WCN_LOG_RESTORE,修护无线设定
#From:gw.gm.17,Everquest 
gw.gm.17,持续寻求
#From:GW_INET_ACCESS_INITIAL_IP,Internet access for IP address %v set to: %s 
GW_INET_ACCESS_INITIAL_IP,用于Ip地址的%v 设置的英特网访问到：%s
#From:.wizquit,Do you want to abandon all changes you made to this wizard? 
.wizquit,你想放弃所有你在向导中作出的改变吗？
#From:tss.intro,The System Settings section allows you to reboot the device, or restore the router to the factory default settings. Restoring the unit to the factory default settings will erase all settings, including any rules that you have created. 
tss.intro,系统设定部分允许你重启设备，或恢复路由器到出厂默认设定。恢复到出厂默认设定将消除包括你建立的任意法则的所有设定。
#From:af.EFT.0,Endpoint Independent 
af.EFT.0,端点独立
#From:help318,When you set <span class="option">Enable DHCP Server</span>, the following options are displayed. 
help318,当你设定<span class="option">启动动态主机配置协议服务器</span>，如下选项被显示出来。  
#From:tsl.intro,The SysLog options allow you to send log information to a SysLog Server. 
tsl.intro,系统日志特选允许你向系统日志服务器传送日志信息
#From:tt.time.4,3 am 
tt.time.4,3 am
#From:tt.time.21,8 pm 
tt.time.21,8 pm
#From:IPL2TP_SESSION_CONNECTED,L2TP local session 0x%04X connected 
IPL2TP_SESSION_CONNECTED,L2TP 本地通用任务程序0x%04X 被连接
#From:aw.FT,Fragmentation Threshold 
aw.FT,碎片阈值
#From:.save,Save 
.save,保存
#From:at.NEst,Not Estimated 
at.NEst,未估计到的
#From:help888,Once you have a firmware update on your computer, use this option to browse for the file and then upload the information into the router. 
help888,一旦在你的电脑上有一固件升级，使用这选项来浏览文件然后上传信息到路由器。
#From:.firmware,Firmware 
.firmware,固件
#From:gw.gm.43,Rogue Spear 
gw.gm.43,流浪枪
#From:wps.messgae1_1,Please start WPS on the wireless device you are adding to your wireless network winth 
wps.messgae1_1,请开启在你正在添加的无线网络设备上的WPS。
#From:IPL2TP_SHUTDOWN_STARTED,L2TP local tunnel 0x%04X RTE module is shutting down. 
IPL2TP_SHUTDOWN_STARTED,L2TP本地通道0x%04X RTE 模块正在被关闭。
#From:ss.TXPD,TX Packets Dropped 
ss.TXPD,TX 信息包接入
#From:up.tz.55,(GMT+08:00) Beijing, Chongqing, Hong Kong, Urumqi 
up.tz.55,(GMT+08:00)北京,重庆,香港,乌鲁木齐
#From:wwa.intro.online2,Click Next if you still want to secure the router with a password and set the time zone. 
wwa.intro.online2,如果你想用密码来保护路由器安全以及设定时间区，点击下一步
#From:help50,Select the outbound protocol used by your application (for example <code>Both</code>). 
help50,选择你的应用软件使用的外部协议（如<code>Both</code>)
#From:help70,Enter the UDP ports to open (for example <code>6159-6180, 99</code>). 
help70,输入用户数据报协议端口以打开（如<code>6159-6180, 99</code>).
#From:wwl.enc,Encryption 
wwl.enc,加密
#From:bd.title.SDC,DHCP Reservation 
bd.title.SDC,动态主机配置协议保留
#From:up.tz.60,(GMT+09:00) Osaka, Sapporo, Tokyo 
up.tz.60,(GMT+09:00) 大阪,新加坡,东京
#From:gw.gm.54,Ultima 
gw.gm.54,最终的
#From:bws.ORAD,Optional backup RADIUS server 
bws.ORAD,可选择的备份远程用户拨号认证系统服务器
#From:GW_ADMIN_LOGOUT,Administrator logout 
GW_ADMIN_LOGOUT,管理员登出
#From:gw.gm.44,Serious Sam II 
gw.gm.44,严格的Sam II
#From:bwn.RPing,Enable WAN Ping Respond 
bwn.RPing,启动广域网 Ping 回应
#From:igmp.e.h,This option must be enabled if any applications on the LAN participate in a multicast group. If you have a multimedia LAN application that is not receiving content as expected, try enabling this option. 
igmp.e.h,如果任意应用程序在在多点传输组的参与的局域网，选项必须启用。如果你的一个没有像预想的内容的多媒体局域网，试着启用这个选项。
#From:help806,The number of packets sent from the router. 
help806,从路由器发送信息包号码
#From:dlink.wf.op.0,DENY computers access to ONLY these sites 
dlink.wf.op.0,拒绝 电脑访问到唯一的这些地址
#From:help49,Enter the outgoing port range used by your application (for example <code>6500-6700</code>). 
help49,输入你的应用软件使用的外部端口范围（如<code>6500-6700</code>).
#From:help367,Example: 
help367,比如：
#From:gw.gm.28,Links 
gw.gm.28,连接
#From:help337,Windows Me 
help337,视窗 Me
#From:ta.AdmSt,Administrator Settings 
ta.AdmSt,管理员设定
#From:.syslog,SysLog 
.syslog,系统日志
#From:up.tz.08,(GMT-06:00) Central Time (US/Canada) 
up.tz.08,(GMT-06:00)中央时间（美国/加拿大） 
#From:help394,If this is selected, the user must connect from the same computer whenever logging into the wireless network. 
help394,如果被选择了，用户不管什么时候登陆到无线网络必须从相同的电脑上连接.
#From:.aa.wiz.s7.title,Step 5: Port Filter 
.aa.wiz.s7.title,步骤5： 端口过滤
#From:tt.intro.Time,The Time Configuration option allows you to configure, update, and maintain the correct time on the internal system clock. From this section you can set the time zone that you are in and set the NTP (Network Time Protocol) Server. Daylight Saving can also be configured to automatically adjust the time when needed. 
tt.intro.Time,时间配置选项允许你在内部系统时钟上配置，升级，保持正确的时间。从这个部分，你设定你在的时间区域并且设定网络时间协议服务器。当需要时，日光节约时间也能配置，来自动调整时间。
#From:GW_DYNDNS_SERROR,Error updating dynamic DNS entry: %s. Will retry later 
GW_DYNDNS_SERROR,错误地升级动态域名服务器登陆：%s. 将在稍后重试
#From:wwl.s3.note.2,Note: All D-Link wireless adapters currently support WPA. 
wwl.s3.note.2,注释：所有的无线适配器当前支持WPA。
#From:help262,Enable BigPond: 
help262,启用BigPond:
#From:sps.port,Port 
sps.port,端口
#From:help164.2,Whether SPI is enabled or not, the router always tracks TCP connection states and ensures that each TCP packet's flags are valid for the current state. 
help164.2,不管单个程序启动是否启动，路由器始终追踪传输控制协议连接状态并确认每个传输控制协议信息包的标记对于当前状态是有效地。
#From:help881,Wait for the router to reboot. This can take another minute or more. 
help881,等待路由器重启。这将花额外的几分钟或更多时间。
#From:.destip,Destination IP 
.destip,目标IP地址
#From:help840,The Time Configuration option allows you to configure, update, and maintain the correct time on the router's internal system clock. From this section you can set the time zone that you are in and set the Time Server. Daylight saving can also be configured to automatically adjust the time when needed. 
help840,时间配置选项允许你在路由器内部系统时钟上配置，升级和保持正确地时间。从这个部分，你设定你在的时间区域并且设定网络时间协议服务器。当需要时，日光节约时间也能配置，来自动调整时间。
#From:wwa.l2tp.svra,L2TP Server IP Address (may be same as gateway) 
wwa.l2tp.svra,L2TP 服务器IP地址（可能与网关相同）
#From:tt.dsdates,Daylight Saving Dates 
tt.dsdates,日光节约日期
#From:help34b,Note that L2TP VPN connections typically use IPSec to secure the connection. To achieve multiple VPN pass-through in this case, the IPSec ALG must be enabled. 
help34b,注释L2TP VPN 连接有代表性的使用IPSec来保护连接。为了在这种情况下取得多种的VPN 通过，IPSec 应用 水平网关 必须启用。
#From:tt.time.11,10 am 
tt.time.11,10 am
#From:te.EnEmN,Enable Email Notification 
te.EnEmN,启用电子邮箱通知
#From:help786,The actual transmission rate of the client in megabits per second. 
help786,客户机的实际传输速率在兆位每秒的级别上。
#From:bwn.UN,Username 
bwn.UN,用户名
#From:aa.alert.8,This Policy Name is already used. 
aa.alert.8,这个法规名已经被使用了。
#From:ta.ERM,Enable Remote Management 
ta.ERM,启用远程管理
#From:IPPPPLCP_SET_REMOTE_AUTH,LCP sets remote auth: %04x 
IPPPPLCP_SET_REMOTE_AUTH,LCP 设置远程auth: %04x
#From:IPL2TP_FATAL_TIMEOUT,L2TP local tunnel 0x%04X RTE module fatal timeout - remote server is not responding. 
IPL2TP_FATAL_TIMEOUT, L2TP 本地通道0x%04X RTE 模块致命的超时－远程服务将不会响应。
#From:hhaf.ngss,<strong>Non-UDP/TCP/ICMP LAN Sessions</strong> is normally enabled. It facilitates single VPN connections to a remote host. 
hhaf.ngss,<strong>Non- UDP/TCP/ICMP 局域网通用任务程序</strong>不会正常启用。它促进单一VPN连接到一远程主机。
#From:bln.title.NetSt,Network Settings 
bln.title.NetSt,网络设定
#From:av.traftype,Traffic Type 
av.traftype,通信类型
#From:bwn.Mode.PPTP,PPTP (Username / Password) 
bwn.Mode.PPTP,PPTP（用户名/ 密码）
#From:help140,This section shows the currently defined access control policies. A policy can be changed by clicking the Edit icon, or deleted by clicking the Delete icon. When you click the Edit icon, the Policy Wizard starts and guides you through the process of changing a policy. You can enable or disable specific policies in the list by clicking the "Enable" checkbox. 
help140,这部分将显示出当前限定的访问控制法规。点击编辑图标就能改变一法规，和点击删除图标来删除。当点击编辑图标，法规向导通过改变一个法规的过程来开始和引导你，你将以点击“启用”检验包来启用或禁用在列表中的具体法规。  
#From:wprn.rppd,A Required Printing Protocol Is Disabled 
wprn.rppd,一被需要的打印协议是禁用的。
#From:hhsd.intro,All of your WAN and LAN connection details are displayed here. 
hhsd.intro,所有你的广域网和广域网连接细节在这被显示出来。
#From:IPMSCHAP_AUTH_SUCCESS,MSCHAP authentication successful. 
IPMSCHAP_AUTH_SUCCESS,MSCHAP 鉴别成功
#From:help63,Suppose you are hosting an online game server that is running on a PC with a private IP Address of 192.168.0.50. This game requires that you open multiple ports (6159-6180, 99) on the router so Internet users can connect. 
help63,试想你在运行于带有192.168.0.50的私人IP地址的一电脑上主导一在线游戏服务器。这个游戏要求你在路由器上打开多种端口(6159-6180, 99)，以使英特网用户能进行连接。
#From:wps.messgae1_2,Please press down the Push Button (physical or virtual) on the wireless device you are adding to your wireless network within 
wps.messgae1_2,请在你正在添加到你的无线网络的无线设备上按下按钮（实际的或虚拟的）。
#From:ap.intro.sv,The new settings have been applied. 
ap.intro.sv,新的设定已经被应用了
#From:.L2TPsubnet,L2TP Subnet Mask 
.L2TPsubnet,L2TP 子网掩码
#From:GW_LOG_EMAIL_BEFORE_REBOOT,Sending log email before reboot 
GW_LOG_EMAIL_BEFORE_REBOOT,在重启之前发送日志电子邮件
#From:at.Any,Any 
at.Any,任意
#From:help288,The following options apply to all WAN modes. 
help288,以下选项应用所有广域网模式
#From:bws.SM.h1,Unless one of these encryption modes is selected, wireless transmissions to and from your wireless network can be easily intercepted and interpreted by unauthorized users. 
bws.SM.h1,除非其中的一个加密模式被选择，到达或来自你的无线网络的无线传输将被未授权用户轻易的中途阻止。
#From:help177,In addition to the filters listed here, two predefined filters are available wherever inbound filters can be applied: 
help177,除了列于这的过滤器，两预定义的过滤器在内部的过滤器被应用的任意时间都是可用的。
#From:up.tz.46,(GMT+05:00) Islamabad, Karachi, Tashkent 
up.tz.46,(GMT+05:00)伊斯兰堡,卡拉奇,塔什干
#From:rb.wait,Please wait <span id="timeleft"></span>&nbsp;seconds. 
rb.wait,请等<span id="timeleft"></span>&nbsp; 秒
#From:bwl.NN,Wireless Network Name 
bwl.NN,无线网络名
#From:IPL2TP_SESSION_CONNECT_FAIL,L2TP local session 0x%04X connect attempt failed 
IPL2TP_SESSION_CONNECT_FAIL,L2TP本地通用任务程序0x%04X 连接尝试失败
#From:gw.gm.21,Final Fantasy XI (PS2) 
gw.gm.21,最终幻想XI (PS2) ''BEST 
#From:wwl.BEST,BEST 
wwl.BEST,商用电子数据处理系统技术
#From:.support,Support 
.support,支持
#From:aa.alert.14,You cannot add new IP addresses. You can only reuse IP addresses from other policies. 
aa.alert.14,你不能添加新的IP地址。你只能从其他的规则上重新使用IP地址。
#From:.cablestate,Cable Status 
.cablestate,电缆状态
#From:help314,DHCP stands for Dynamic Host Configuration Protocol. The DHCP section is where you configure the built-in DHCP Server to assign IP addresses to the computers and other devices on your local area network (LAN). 
help314, DHCP 表示动态主机配置协议。动态主机配置协议部分在你配置的内置服务器上来分配IP地址到你本地区域网络的的脑和其他设备。
#From:wps.LW13,Add Wireless Device WITH WPS (WI-FI PROTECTED SETUP) Wizard 
wps.LW13,添加带有WPS (WI-FI 被保护 安装)向导的无线设备
#From:sl.Critical,Critical 
sl.Critical,重要的
#From:sc.intro.sv,The new settings have been saved. 
sc.intro.sv,新的设定已经被保存了。
#From:SYSTEM_LOG_INACTIVE,System LOG is inactive 
SYSTEM_LOG_INACTIVE,系统日志是未激活的。
#From:bwn.mici,My Internet Connection is 
bwn.mici,我的英特网连接是
#From:gw.mins,Minutes 
gw.mins,分钟
#From:help852,If the router loses power for any reason, it cannot keep its clock running, and will not have the correct time when it is started again. To maintain correct time for schedules and logs, either you must enter the correct time after you restart the router, or you must enable the NTP Server option. 
help852,如果路由器由于任何原因断电，他不能保持他的时钟运行，并将在重新开启时，不能显示正确地时间。
#From:.In,In 
.In,在
#From:help870,Select this option if you want logs to be sent by email according to a schedule. 
help870,如果你想根据时间表以电子邮件的形式发送日志，选择这个选项。
#From:gw.gm.74,MSN Game Zone (DX) 
gw.gm.74,MSN 游戏区域(DX)
#From:help797,Firewall and Security 
help797,防火墙和安全
#From:gw.gm.39,Rainbow Six 
gw.gm.39,彩虹6
#From:wwl.alert.pv5.3_10,WEP key must be exactly 10 hexadecimal digits (0-9 or A-F). 
wwl.alert.pv5.3_10,WEP钥匙必须是10个十六进制的数字(0-9 or A-F).
#From:help149,The MAC address filter section can be used to filter network access by machines based on the unique MAC addresses of their network adapter(s). 
help149,MAC地址过滤部分被用于过滤在基于他们网络适配器上的唯一MAC地址机器的网络访问。
#From:hhpt.intro,Use this feature if you are trying to execute one of the listed network applications and it is not communicating as expected. 
hhpt.intro,如果你试图执行其中一列于网络应用程序，使用这个特性并且他不能如期望的那样进行通信。
#From:GW_WAN_CARRIER_DETECTED,WAN interface cable has been connected 
GW_WAN_CARRIER_DETECTED,广域网电缆己经被连接了。
#From:bwn.BPU,BigPond User Id 
bwn.BPU,BigPond 用户ID
#From:help195,Select this option if you want this schedule in effect all day for the selected day(s). 
help195,如果你想让选择的天数在这时间表上都起作用，选择这个选项。
#From:help823.1,The initial value of Time Out depends on the type and state of the connection. 
help823.1,中止连接的原始价值依赖于类型和连接状态。
#From:.internetc,Internet Connection 
.internetc,英特网连接
#From:tsc.pingt.msg5,Resolved to 
tsc.pingt.msg5,决定到达
#From:help172,Enter a name for the rule that is meaningful to you. 
help172,输入一个对你有用法规的名字
#From:.trigger,Trigger 
.trigger,扳机
#From:help783,The Ethernet ID (MAC address) of the wireless client. 
help783,无线客户机的以太网ID（MAC 地址）
#From:ub.intro.2,The Gateway will not be reprogrammed. 
ub.intro.2,网关将不会被程序重调
#From:hhta.pw,For security reasons, it is recommended that you change the password for the Admin and User accounts. Be sure to write down the new and passwords to avoid having to reset the router in case they are forgotten. 
hhta.pw,出于安全原因，建议你改变用于Admin and User 的帐户。确保写下新的密码来避免在你忘记密码的情况下对路由器的重设。
#From:.aa.wiz.s8.title,Step 6: Configure Web Access Logging 
.aa.wiz.s8.title,步骤6：配置网络访问存入
#From:help173,The rule can either Allow or Deny messages. 
help173,法则能要么允许要么拒绝信息
#From:help771,Status Help 
help771,状态帮助
#From:tsl.SLSIPA,Syslog Server IP Address 
tsl.SLSIPA,系统日志服务器IP地址
#From:.aa.wiz.s7.msg,Add Port Filters Rules. 
.aa.wiz.s7.msg,添加端口过滤法则
#From:tt.time.13,12 pm 
tt.time.13,12 pm
#From:up.tz.67,(GMT+10:00) Guam, Port Moresby 
up.tz.67,(GMT+10:00)关岛,莫尔兹比港
#From:help289a,Primary DNS Server, Secondary DNS Server 
help289a,第一域名服务器，第二域名服务器
#From:BIGPOND_LOGGED_IN,BigPond logged in 
BIGPOND_LOGGED_IN,BigPond 登入
#From:haf.dmz.10,When a LAN host is configured as a DMZ host, it becomes the destination for all incoming packets that do not match some other incoming session or rule. If any other ingress rule is in place, that will be used instead of sending packets to the DMZ host; so, an active session, virtual server, active port trigger, or port forwarding rule will take priority over sending a packet to the DMZ host. (The DMZ policy resembles a default port forwarding rule that forwards every port that is not specifically sent anywhere else.) 
haf.dmz.10,当你网络主机被配置为一隔离区主机，他将标为用于所有不能与一些其他的进入对话或法则 相配的进入信息包的目标地址。如果任意其他的进入法则在是适当位置，那将替代发送信息包到隔离区主机而被使用；因此，一个激活的通用任务程序，虚拟服务器，激活的端口触发器或端口转发法则将优先来发送一信息包到这个隔离区主机。(隔离区法则类似促进没有被特定发送到其他任意地方的一默认端口转发法规。 
#From:help819,State for sessions that use the TCP protocol. 
help819,陈述使用TCP协议的通用任务程序
#From:wprn.s3b,If the progress bar did not appear, the setup executable did not launch and setup is not yet complete. Refer to the Troubleshooting Tips section below. 
wprn.s3b,如果进程栏没有出现，可执行的安装将不能发起以及安装不能被完成。查阅上面的解决问题提示部分。
#From:sps.tcpport,TCP Port 
sps.tcpport,传输控制协议端口
#From:dlink.wf.intro,Configure Website Filter below: 
dlink.wf.intro,配置上面的网络过滤
#From:.websfilter,Website Filter 
.websfilter,网站过滤器
#From:sd.BPSN,BigPond Server Name 
sd.BPSN,BigPond 服务器名
#From:.password_user,User Password 
.password_user,用户密码
#From:GW_INET_ACCESS_POLICY_END_IP,Policy %s stopped; Internet access for IP address %v changed to: %s 
GW_INET_ACCESS_POLICY_END_IP,法则%s 停止；用于IP地址%v 改变的英特网访问到达：%s
#From:bwn.msg.Modes,Choose the mode to be used by the router to connect to the Internet. 
bwn.msg.Modes,选择被用于路由器的模式来连接英特网
#From:up.gX.1,The IP address " + mf.dmz_address.value + " is not valid. 
up.gX.1,IP地址" + mf.dmz_address.value + " 是无效的。
#From:.next,Next 
.next,下一个
#From:.setup,Setup 
.setup,安装
#From:htsc.pingt.s,The host is pinged repeatedly until you press this button. 
htsc.pingt.s,主机被反复的Ping入直到你按下按钮。
#From:EMAIL,Email 
EMAIL,电子邮件
#From:.mode,Mode 
.mode,模式
#From:tt.Feb,Feb 
tt.Feb,二月
#From:sps.raw1,Use this information to configure your computer for raw TCP port printing. 
sps.raw1,使用这些信息来配置用于为加工的TCP端口打印的你的电脑。
#From:GW_DYNDNS_SUCCESS,Successfully updated dynamic DNS entry for %s 
GW_DYNDNS_SUCCESS,为%s成功升级动态DNS
#From:IPPORTFORWARDALG_TCP_PACKET_ALLOC_FAILURE,Port forwarding ALG failed to allocate session for TCP packet from %v:%u to %v:%u 
IPPORTFORWARDALG_TCP_PACKET_ALLOC_FAILURE,端口转发应用 水平网关 未能分配用于从 %v:%u 到 %v:%u TCP信息包的通用任务程序。
#From:IGMP_ROUTER_LOW_RESOURCES,IGMP router has rejected group %v due to low system resources 
IGMP_ROUTER_LOW_RESOURCES,IGMP路由器由于系统资源有限而拒绝%v组。
#From:bwl.CWM.h1,The "Auto 20/40 MHz" option is usually best. 
bwl.CWM.h1,"Auto 20/40 MHz"选项通常是最好的。
#From:up.tz.39,(GMT+03:00) Moscow, St. Petersburg, Volgograd 
up.tz.39,(GMT+03:00) 莫斯科,圣彼得堡,伏尔加格勒
#From:help40,Allows devices and applications using VoIP (Voice over IP) to communicate across NAT. Some VoIP applications and devices have the ability to discover NAT devices and work around them. This ALG may interfere with the operation of such devices. If you are having trouble making VoIP calls, try turning this ALG off. 
help40,允许设备和应用软件使用VoIP来在NAT上进行交流。一些VoIP应用软件＆设备有能力来发现在他们周围的NAT设备＆和工作。这应用 水平网关可能干扰了这些设备的运行。如果你在在打VoIP电话时于到了困难，试着关闭这应用 水平网关。  
#From:td.intro.DDNS.DLINK,Sign up for D-Link's Free DDNS service at 
td.intro.DDNS.DLINK,为D-link 的免费数字数据服务而签约
#From:.pf,Port Forwarding 
.pf,端口转发
#From:IPNAT_UDP_UNABLE_TO_HANDLE_HEADER,Dropped UDP packet from %v to %v as unable handle packet header 
IPNAT_UDP_UNABLE_TO_HANDLE_HEADER,当不能处理信息包头时，从%v 到 %v 的用户数据报协议信息包被过滤掉。
#From:GW_ROUTES_GATEWAY_IP_ADDRESS_CONFLICTS_WARNING,<warn>Route gateway IP %v matches the address of the intended interface and will be disabled.</warn> 
GW_ROUTES_GATEWAY_IP_ADDRESS_CONFLICTS_WARNING,<warn>路由网关IP %v与有意的界面地址相配并且将停用.</warn>。
#From:GW_INET_ACCESS_INITIAL_MAC,Internet access for MAC address %m set to: %s 
GW_INET_ACCESS_INITIAL_MAC,用于MAC地址%m设定的英特网访问：%s
#From:IPPPPCHAP_AUTH_SUCCESS,CHAP authentication successful. 
IPPPPCHAP_AUTH_SUCCESS,CHAP 鉴定成功
#From:help187,Normally the wireless transmitter operates at 100% power. In some circumstances, however, there might be a need to isolate specific frequencies to a smaller area. By reducing the power of the radio, you can prevent transmissions from reaching beyond your corporate/home office or designated wireless area. 
help187,通常无线传输在100% 电力下运行。但在一些情况下，这将需要隔离具体的频段到更小的领域。以降低收音机电力的方式，你将阻止到达超出你的公司/家庭办公室或指定的无线区域的传输。
#From:.aa.block.all,Block All Access 
.aa.block.all,阻止所有访问
#From:GW_WLAN_LINK_DOWN,Wireless Link is down 
GW_WLAN_LINK_DOWN,无线连接时关闭的。
#From:help379,The amount of time before the group key used for broadcast and multicast data is changed. 
help379,在用于广播和多点传送数据的组关键点之前的时间数量是被改变了的。
#From:up.tz.70,(GMT+11:00) Magadan, Solomon Is., New Caledonia 
up.tz.70,(GMT+11:00) Magadan, 所罗门,新喀里多尼亚
#From:IPNAT_ICMP_BLOCKED_INGRESS_ICMP_ERROR_PACKET,Blocked incoming ICMP error message (ICMP type %u) from %v to %v as there is no ICMP session active between %v and %v 
IPNAT_ICMP_BLOCKED_INGRESS_ICMP_ERROR_PACKET,阻止ICMP错误信息(ICMP type %u)来自%v 到%v的进入，当在%v 和 %v之间没有ICMP通用任务程序激活时，
#From:GW_SCHEDULES_IN_USE_INVALID.s1,Schedule 
GW_SCHEDULES_IN_USE_INVALID.s1,时间表
#From:fb.p.2,This page is not included in the router's Allowed Web Site List. 
fb.p.2,这页没能包括在路由器的允许网络站点列表。
#From:sps.ps,Printer Status 
sps.ps,打印状态
#From:help47,You need to configure your router to allow a software application running on any computer on your network to connect to a web-based server or another user on the Internet. 
help47,你需要配置你的路由器来允许一软件在你的网络上的任意电脑上运行，并连接到基于网络的服务器或在英特网上的其他用户。
#From:wwa.title.s4,Step 4: Save Settings and Connect 
wwa.title.s4,步骤4：保存设定和连接
#From:tt.time.18,5 pm 
tt.time.18,5 pm
#From:help860,When this option is enabled, router activity logs or firmware upgrade notifications can be emailed to a designated email address, and the following parameters are displayed. 
help860,当选项被启用时，路由器活动日志或固件升级通知能被电邮到指定的电邮地址，并且如下参数被列出。
#From:GW_UPNP_IGD_PORTMAP_RELEASE,UPnP deleted entry %v <-> %v:%d <-> %v%d %s '%s' (client released address) 
GW_UPNP_IGD_PORTMAP_RELEASE,即插即用删除入口%v <-> %v:%d <-> %v%d %s '%s'（客户端释放地址）
#From:wwa.intro.s4,The Internet Connection Setup Wizard has completed. Click the Connect button to save your settings and reboot the router. 
wwa.intro.s4,英特网连接向导已经完成。点击并连接按钮来保存你的设定和重启路由器。
#From:help267,Some ISP's may require that you enter a Service Name. Only enter a Service Name if your ISP requires one. 
help267,一些Internet服务提供者要求你输入一服务名。如果你的Internet服务提供者需要你一的话，只有输入一服务名。
#From:IPL2TP_SESSION_ABORTED,L2TP local session 0x%04X aborted 
IPL2TP_SESSION_ABORTED, L2TP本地通用任务程序0x%04X失败
#From:help874,This section allows you to manage the router's configuration settings, reboot the router, and restore the router to the factory default settings. Restoring the unit to the factory default settings will erase all settings, including any rules that you've created. 
help874,这部分允许你管理路由器的配置设定，重启路由器和恢复路由器到出厂默认设置。恢复到出厂默认设定将消除所有的设定，包括你已经建立的任意法规在内。
#From:tt.Sep,Sep 
tt.Sep,九月
#From:IPSEC_ALG_ESP_UNABLE_TO_HANDLE_HEADER,Dropped ESP packet from %v to %v as unable handle packet header 
IPSEC_ALG_ESP_UNABLE_TO_HANDLE_HEADER,当不能处理信息包头时，从%v 到%v过滤ESP 信息包
#From:bws.GKUI,Group Key Update Interval 
bws.GKUI,组关键点间隔升级
#From:hhaw.wmm,Enabling <strong>WMM</strong> can help control latency and jitter when transmitting multimedia content over a wireless connection. 
hhaw.wmm,当在一无线连接上传输时，启用<strong>WMM</strong>能帮助控制潜伏期和速度偏差。
#From:help168c,In these cases, you can use Inbound Filters to limit that exposure by specifying the IP addresses of internet hosts that you trust to access your LAN through the ports that you have opened. You might, for example, only allow access to a game server on your home LAN from the computers of friends whom you have invited to play the games on that server. 
help168c,在这些情况下，你能以具体化你信任的通过你打开的端口访问局域网地址的英特网主机IP地址的方式使用内部过滤器来限制暴露。比如，你可以只允许来自服务器上你所邀请来一起游戏的朋友的电脑的家庭网络的游戏服务器进行访问。
#From:BIGPOND_LOGGING_IN,BigPond logging in 
BIGPOND_LOGGING_IN,BigPond 登陆
#From:wwa.wanmode.pptp,Username / Password Connection (PPTP) 
wwa.wanmode.pptp,用户名/密码连接(PPTP)
#From:help58,Range (50-100) 
help58,范围(50-100)
#From:help885,This option will check D-Link's support site to see if you have the latest version of the firmware available. If a newer version is available, download instructions will be displayed. 
help885,如果你有可用的最新的固件，这选项将检测D-link的支持站点来观察.如果你有新的版本可用，下载说明将会显示出来。
#From:ddns.connected,Connected 
ddns.connected,被连接的
#From:ub.Upload_Failed,Upload Failed 
ub.Upload_Failed,升级失败
#From:WIFISC_AP_PROXY_END_ON_MSG,WPS end for STA with MAC (%m) on msg: %s 
WIFISC_AP_PROXY_END_ON_MSG,WPS终止在msg的带有MAC (%m)的STA：%s
#From:help278,PPTP (Point to Point Tunneling Protocol) uses a virtual private network to connect to your ISP. This method of connection is primarily used in Europe. This method of connection requires you to enter a <span class="option">Username</span> and <span class="option">Password</span> (provided by your Internet Service Provider) to gain access to the Internet. 
help278,端对端通道协议使用虚拟私人连接来连接到你的Internet服务提供者。这种连接办法基本上被使用在欧洲。这连接方法要求你输入<span class="option">用户名</span> 和 <span class="option">密码</span>（由你的Internet服务提供者提供）来获取访问英特网。
#From:htsc.pingt.h,Enter either the IP address of the target computer or enter its fully qualified domain name. 
htsc.pingt.h,输入目标电脑的IP地址或输入它的完全资格的域名。
#From:hhts.def,A System Logger (syslog) is a server that collects in one place the logs from different sources. If the LAN includes a syslog server, you can use this option to send the router's logs to that server. 
hhts.def,一系统日志是由不同的资源搜集到一个地方的一服务器。如果你的局域网包含一系统日志服务器，你可以使用这选项来发送路由器日志到哪个服务器。
#From:help255,Used when your ISP provides you a set IP address that does not change. The IP information is manually entered in your IP configuration settings. You must enter the 
help255,当你的Internet服务提供者提供给你一组不能改变得IP地址，就使用它们。IP信息是手动的输入在你的IP配置设定中的。你必须输入
#From:bws.2RSP,Second RADIUS server Port 
bws.2RSP,第二远程用户拨号认证系统服务器端口
#From:help7,Enter the Private Port as [80] 
help7,输入私人端口作为[80]
#From:bwl.VS.0,Visible 
bwl.VS.0,可见的
#From:af.TEFT,TCP Endpoint Filtering 
af.TEFT,传输控制协议终端过滤
#From:help86,When <span class="option">Connection Type</span> is set to <span class="option"> Auto-detect</span>, the automatically detected connection type is displayed here. 
help86,当<span class="option">连接类型</span>被设定到<span class="option">自动探测</span>，自动探测连接类型被显示出来。
#From:sd.NNSSID,Network Name (SSID) 
sd.NNSSID,网络名(SSID)
#From:wt.p.2,Accessing this web page might have an effect on the measurement. 
wt.p.2,访问这网络页面对于测量起到了作用。
#From:.gateway,Gateway 
.gateway,网关
#From:tt.CurTime,Current Router Time 
tt.CurTime,当前路由器时间
#From:.AM,AM 
.AM,上午
#From:DISCONNECTED,Disconnected 
DISCONNECTED,断开
#From:gw.gm.47,Soldier of Fortune 
gw.gm.47,军事冒险者
#From:up.tz.22,(GMT-01:00) Azores 
up.tz.22,(GMT-01:00) 亚述尔群岛
#From:WIFISC_IR_REGISTRATION_SESSION_OVERLAP,WPS Internal Registrar detected session overlap between %m and %m 
WIFISC_IR_REGISTRATION_SESSION_OVERLAP,WPS 内部登记员在%m 和%m之间探测通用任务程序更迭。
#From:.pwsame,Please make the two passwords the same and try again 
.pwsame,请使两个密码一致并重试
#From:GW_DYNDNS_UPDATE_IP,WAN IP changed to %v, updating to dynamic DNS provider 
GW_DYNDNS_UPDATE_IP,升级到动态域名服务器供应商的广域网IP地址改变为%v
#From:GW_DHCPSERVER_NEW_ASSIGNMENT,A network computer (%s) was assigned the IP address of %v. 
GW_DHCPSERVER_NEW_ASSIGNMENT,一网络电脑(%s)被分配%v的IP地址。
#From:as.WM,Windows/MSN Messenger 
as.WM,视窗/MSN 
#From:up.tz.03,(GMT-09:00) Alaska 
up.tz.03,(GMT-09:00)阿拉斯加
#From:ta.msg.TW,Please enter the same password into both boxes, for confirmation. 
ta.msg.TW,为确认请输入相同的密码到栏里。
#From:wps.p3.3,-PBC (Push Button Configuration) 
wps.p3.3,按钮设置
#From:help774,Depending on the type of WAN connection, you can take one of the following sets of actions: 
help774,根据广域网连接类型，你能选择其中一个如下的行为：
#From:hhac.edit,Click the <strong>Edit</strong> icon to modify an existing rule using the Policy Wizard. 
hhac.edit,点击<strong>编辑</strong>图标来修改用于法则向导的已存在法规。
#From:up.tz.36,(GMT+02:00) Jerusalem 
up.tz.36,(GMT+02:00)耶路撒冷
#From:.hostname,Host Name 
.hostname,主机名
#From:GW_INET_ACCESS_INITIAL_FAIL,Internet access control initialization failed 
GW_INET_ACCESS_INITIAL_FAIL,英特网访问控制初始化失败
#From:GW_WEB_FILTER_INITIAL_FAIL,Web filter initialization failed 
GW_WEB_FILTER_INITIAL_FAIL,网络过滤初始化失败
#From:te.OnSch,On Schedule 
te.OnSch,在时间表上
#From:wwl.title.s4,Step 3: Set your Wireless Security Password 
wwl.title.s4,步骤3：设定你的无线安全密码
#From:help281,Reconnect Mode: 
help281,重新连接模式
#From:gw.gm.77,Gamespy Tunnel 
gw.gm.77,游戏间谍 通道
#From:.clonemac,Clone Your PC's MAC Address 
.clonemac,克隆你电脑的MAC地址
#From:hhss.intro,This is a summary of the number of packets that have passed between the WAN and the LAN since the router was last initialized. 
hhss.intro,自路由器北最近的初始化，这是通过广域网和局域网的信息报数字的总结。
#From:at.MUS,Measured Uplink Speed 
at.MUS,测量向上传输速率
#From:hhan.wans,The WAN speed is usually detected automatically. If you are having problems connecting to the WAN, try selecting the speed manually. 
hhan.wans,广域网速度被自动的探测。如果你在连接广域网上有困难，试着选择手动速度。
#From:help892,Enable this option only if you have purchased your own domain name and registered with a dynamic DNS service provider. The following parameters are displayed when the option is enabled. 
help892,如果你购买了属于你的域名和注册了一动态域名服务器，启用这选项。当选项启用时，如下参数将显示出来。
#From:help382,The key is entered as a pass-phrase of up to 63 alphanumeric characters in ASCII (American Standard Code for Information Interchange) format at both ends of the wireless connection. It cannot be shorter than eight characters, although for proper security it needs to be of ample length and should not be a commonly known phrase. This phrase is used to generate session keys that are unique for each wireless client. 
help382,密码被输入作为一两端无线连接的63个文字数字式字符ASCII码的通过语。它不能短于8 个数字，虽然他需要足够长和不常规的短语来确保安全。这短语被用来产生对于每个无线客户端唯一通用任务程序密码。 
#From:tsc.hrmin,(hour:minute, 12 hour time) 
tsc.hrmin,（小时：分钟，12小时时间）
#From:help82,This is the uplink speed measured when the WAN interface was last re-established. The value may be lower than that reported by your ISP as it does not include all of the network protocol overheads associated with your ISP's network. Typically, this figure will be between 87% and 91% of the stated uplink speed for xDSL connections and around 5 kbps lower for cable network connections. 
help82,当广域网被最新的重建立，向上传输的速度将被测量出来。当它不能包含与你的Internet服务提供者网络联系的网络协议过头，，值将会比上报到你的Internet服务提供者更低。具有代表性的，这个数字将在用于xDSL 连接的87% 与91% 的固定向上传输和用于电缆网络连接的低于5 kbps之间。
#From:gw.gm.24,Heretic II 
gw.gm.24,异教徒II
#From:gw.gm.13,Delta Force 
gw.gm.13,三角州战争
#From:aw.RT,RTS Threshold 
aw.RT,发送请求阀值
#From:help340,Windows XP 
help340,视窗XP
#From:sd.WLAN,Wireless LAN 
sd.WLAN,无线 局域网
#From:help864,If your SMTP server requires authentication, select this option. 
help864,如果你的SMTP服务器要求鉴定，选择这选项
#From:dlink.1.YM23,Destination Port and Start Port should not be equal to 0 for Port Filter 
dlink.1.YM23,目标端口和开始端口不会等于用于端口过滤0值
#From:tf.intro.FWU1,There may be new firmware for your 
tf.intro.FWU1,这有新的固件为你的
#From:wprn.bados,Unsupported Operating System 
wprn.bados,无支持的操作系统
#From:.metric,Metric 
.metric,公制的
#From:INBOUND_FILTER,Inbound Filter 
INBOUND_FILTER,内部过滤
#From:IPNAT_UDP_BLOCKED_INGRESS,Blocked incoming UDP packet from %v:%u to %v:%u 
IPNAT_UDP_BLOCKED_INGRESS,阻止来自从 %v:%u 到 %v:%u的进入用户数据报协议信息包
#From:help351,This option turns off and on the wireless connection feature of the router. When you set this option, the following parameters are in effect. 
help351,选项关闭并处于路由器的无线连接状态。当你设置了这选项，如下参数将起作用。
#From:wwz.manual.key2,Use this options if you prefer to create our own key. 
wwz.manual.key2,如果你愿意建立你自己的密码，使用选项。
#From:.PPTPsubnet,PPTP Subnet Mask 
.PPTPsubnet,生产前试验的程序子网掩码
#From:help20,The port that will be used on your internal network. 
help20,在你的内部网使用的端口
#From:gw.gm.6,Black and White 
gw.gm.6,黑与白
#From:bws.WPAM,WPA Mode 
bws.WPAM,WPA 模式
#From:wwl.GOOD,GOOD 
wwl.GOOD,好
#From:gw.gm.36,Postal 2: Share the Pain 
gw.gm.36,邮政2：分享痛苦
#From:help894,Enter your host name, fully qualified; for example: <code>myhost.mydomain.net</code>. 
help894,键入你的主机名，完全的符合资格；如：<code>我的主机名.我的域名。网名.</code>
#From:.subnet,Subnet Mask 
.subnet,子网掩码
#From:PPTP_EVENT_REMOTE_WINDOW_SIZE,The PPTP transmit window is %u 
PPTP_EVENT_REMOTE_WINDOW_SIZE,生产前试验的程序传输视窗是%u
#From:wps.KR35,Step 1: Select Configuration Method for your Wireless Network 
wps.KR35,骤1：对你的无线网络选择配置方法
#From:help329.rsv,The <code>Reserve</code> option converts this dynamic IP allocation into a DHCP Reservation and adds the corresponding entry to the DHCP Reservations List. 
help329.rsv,<code>保存</code>选项转换动态IP分配到一动态主机配置协议保存，并添加相关输入到动态主机配置协议保存列表。
#From:gw.gm.58,Vietcong 
gw.gm.58,越共
#From:GW_WAN_MODE_IS,Bringing up WAN using %s 
GW_WAN_MODE_IS,使用%s 来建立广域网
#From:ns.intro.,Use this section to configure the internal network settings of your router and also to configure the built-in DHCP Server to assign IP addresses to the computers on your network. The IP Address that is configured here is the IP Address that you use to access the Web-based management interface. If you change the IP Address here, you may need to adjust your PC's network settings to access the network again. 
ns.intro.,使用这部分来配置你路由器上的内部网络设定，并且也用来配置内置的动态主机配置协议服务器到你网络上的电脑。配置在这的IP地址是你用来访问基于网络管理界面的IP地址。如果你在这改变了IP地址，你将需要调整你的PC网络设定来有一次访问网络。
#From:IPDNSRELAYALG_REJECTED_PACKET,DNS relay ALG rejected packet from %v:%u to %v:%u 
IPDNSRELAYALG_REJECTED_PACKET,域名服务器交替应用 水平网关拒绝来自%v:%u 到 %v:%u的信息包
#From:ss.intro,Traffic Statistics display Receive and Transmit packets passing through your router. 
ss.intro,通信统计数据显示通过你路由器的接收和传输信息包


#From:KR112,You should examine these warnings as some features may have been disabled.
KR112,您应当查看这下警告，因为某些功能可能被禁用了
#From:GW_WLAN_11A_CH_MID_BAND_WARN,<warn>Not all station are able to operate in channel 100-140. Please change channel if the station fails to connect.</warn>
GW_WLAN_11A_CH_MID_BAND_WARN,<warn>并不是所有工作站都能在100-140信道上操作。如果工作站连接失败，请更改信道。</warn>
#From:KR106,Enable anti-spoof checking
KR106,开启抗欺骗检查
#From:KR108,Enabling this option can provide protection from certain kinds of "spoofing" attacks. However, enble this option with care. With some modems, the WAN connection may be lost when this option is enabled. In that case, it may be necessary to change the LAN subnet to something other than 192.168.0.x (192.168.2.x, for example), to re-establish the WAN connection.
KR108,开启该项可增进对防止欺骗攻击的保护。然而，请小心使用该功能。当该功能被开启时某些调制解调器的WAN连接可能会断开。在那种情况下，就必须将LAN子网更改为192.168.0.x以外的网段（例如192.168.2.x）来重新建立WAN连接。
#From:GW_NAT_CONFLICTING_CONNECTIONS_LOG,Rule %s conflicts with an existing connection (%v:%u (public %v:%u)--->%v:%u). Connectivity to the rule may be affected until this connection ends.
GW_NAT_CONFLICTING_CONNECTIONS_LOG,规则%s与现有连接（%v:%u（public %v:%u）--->%v:%u）发生冲突。规则的连接性只有在该连接关闭后才能生效。
#From:KR111,Warnings were raised as a result of configuration changes.
KR111,配置改变后会发出一个警告。
#From:KR109,Log Entries
KR109,日志条目
#From:GW_NAT_CONFLICTING_CONNECTIONS_WARNING,<warn>Rule %s conflicts with an existing connection (%v:%u (public %v:%u)--->%v:%u). Connectivity to the rule may be affected until this connection ends.</warn>
GW_NAT_CONFLICTING_CONNECTIONS_WARNING,<warn>规则%s与现有连接（%v:%u（public %v:%u）--->%v:%u）发生冲突。规则的连接性只有在该连接关闭后才能生效。</warn>
#From:GW_PURE_SETACCESSPOINTMODE,HNAP SetAccessPointMode %s returns %s, %s
GW_PURE_SETACCESSPOINTMODE,HNAP 设置接入点模式 %s 返回%s， %s
#From:GW_NAT_REJECTED_SPOOFED_PACKET,Blocked packet from %v to %v that was received from the wrong network interface (IP address spoofing)
GW_NAT_REJECTED_SPOOFED_PACKET,从错误的网络接口（IP地址欺骗）接收的数据包从 %v 到 %v被阻止。
#From:KR110,Message
KR110,信息
#From:GW_ROUTES_ROUTE_GATEWAY_NOT_IN_SUBNET_WARNING,<warn>Route gateway IP %v is not in interface subnet (%v/%v) and will be disabled.</warn>
GW_ROUTES_ROUTE_GATEWAY_NOT_IN_SUBNET_WARNING,<warn>路由器网管IP地址%v不在子网(%v/%v)范围内，将被禁用。</warn>
#From:KR107,When this option is enabled, the router restricts the flow of outbound traffic so as not to exceed the WAN uplink bandwidth.
KR107,当开启这个选项后，路由器将限制外部数据流量，以避免超出WAN上行带宽。
#From:KR105,Anti-Spoof checking
KR105,抗欺骗检查
#From:IPSTACK_REJECTED_LAND_ATTACK,Blocked packet from %v to %v (LAND Attack)
IPSTACK_REJECTED_LAND_ATTACK,从%v到%v被阻止的数据包（LAND攻击）
#From:LS321,WEP
LS321,WEP
#From:KR67,Log emails
KR67,日志email
#From:YM71,destination ending port should be between 0 and 65535 inclusive.
YM71,目的地终端端口应该在0到65535之间
#From:GW_FIREWALL_RANGE_DUPLICATED_INVALID,The Source IP Range '%v-%v' is duplicated.
GW_FIREWALL_RANGE_DUPLICATED_INVALID,源IP范围 '%v-%v' 已复制
#From:LS422,Hardware Address
LS422,硬件地址
#From:bwz.LWCNWz,Use Windows Connect Now
bwz.LWCNWz,立即使用Windows连接
#From:GW_WAN_WAN_GATEWAY_IP_ADDRESS_INVALID,Invalid WAN gateway IP address: %v
GW_WAN_WAN_GATEWAY_IP_ADDRESS_INVALID,无效 WAN 网关IP地址： %v
#From:ta.wcn,Save Configuration To Wireless Network Setup Wizard
ta.wcn,把配置保存到无线网络设置向导
#From:LW57,A PIN is a unique number that can be used to add the router to an existing network or to create a new network. The default PIN may be printed on the bottom of the router. For extra security, a new PIN can be generated. You can restore the default PIN at any time. Only the Administrator ("admin" account) can change or reset the PIN.
LW57,PIN码是一个能把路由器添加到一个已存在的网络中或创建一个新网络的唯一号码。缺省PIN码可能打印在路由器的底部。为了额外的安全，可以产生一个新PIN码。您可以在任何时候恢复缺省PIN码。只有管理员（ "admin"帐号）可以改变或重新设置PIN码。
#From:.wepkey2,WEP Key 2
.wepkey2,WEP 密码2
#From:help145,Enter the URL (address) of the Web Site that you want to allow; for example: <code>google.com</code>. Do not enter the <code>http://</code> preceding the URL. Enter the most inclusive domain; for example, enter <code>dlink.com</code> and access will be permitted to both <code>www.dlink.com</code> and <code>support.dlink.com</code>.
help145,输入您想要允许的Web站点的URL（地址），例如：<code>google.com</code>. 不能在URL之前输入 <code>http://</code> 。输入范围最大的域，例如，输入<code>dlink.com</code> 则将允许对<code>www.dlink.com</code> and <code>support.dlink.com</code>的访问。
#From:tsc.pingt.msg109,Hop
tsc.pingt.msg109,跳
#From:bd.NETBIOS_REG_TYPE,NetBIOS node type
bd.NETBIOS_REG_TYPE,NetBIOS 接点类型
#From:ap.intro.cont,Please press the button below to continue configuring the router.
ap.intro.cont,请点击下面的按钮来继续配置路由器。
#From:LW60,Create a random number that is a valid PIN. This becomes the router's PIN. You can then copy this PIN to the user interface of the registrar.
LW60,创建一个随即数字作为一个有效的PIN码。这个号码成为路由器的PIN码。然后您可以将该PIN码复制到用户注册界面。
#From:.rs.failed,Restore Failed
.rs.failed,恢复失败
#From:KR62,Select this option if the device is connected to a local network downstream from another router. In this mode, the device functions as a bridge between the network on its WAN port and the devices on its LAN port and those connected to it wirelessly.
KR62,如果设备已连接到另一个路由器的下游本地网络则选择该选项。在该模式下，设备作为网桥在其WAN端口上连接的网络与LAN端口上连接的设备以及其他无线连接的设备之间工作。
#From:KR20,The Wireless Device PIN field can not be blank
KR20,无线设备PIN码框不能为空
#From:at.intro.2,For best performance, use the Automatic Classification option to automatically set the priority for your applications.
at.intro.2,为了达到最大的性能，使用自动分级选项为您的应用自动设置优先级。
#From:bd.NETBIOS_ENABLE,NetBIOS announcement
bd.NETBIOS_ENABLE,NetBIOS公告
#From:KR77,The subnet mask of the local area network.
KR77,局域网的子网掩码。
#From:help364,Super G with Dynamic Turbo
help364,带有Dynamic Turbo的Super G 
#From:.aa.bsecure.shopping,Shopping
.aa.bsecure.shopping,购物
#From:.aa.bsecure.public_proxies,Public Proxies
.aa.bsecure.public_proxies,公共协议
#From:wepkey1,WEP Key 1
wepkey1,WEP 密码 1
#From:ZM11,Send/Receive authorization
ZM11,发送/接收 授权
#From:tsc.start_time,Start Time
tsc.start_time,开始时间
#From:YM69,source ending port should be between 0 and 65535 inclusive.
YM69,源终端端口应该在0到65535之间。
#From:KR82,If NetBIOS advertisement is swicthed on, switching this setting on causes WINS information to be learned from the WAN side, if available.
KR82,如果NetBIOS公告已打开，将在可能的情况下从WAN网络学习到WINS信息。
#From:LW39b,Only Administrator has access to these functionalities. The buttons are disabled as you are not currently logged in as Administrator.
LW39b,只有管理员可以访问该功能。如果您当前不是以管理员身份登录，则该按钮被禁用。
#From:GW_SCHEDULES_NAME_RESERVED_INVALID,The Schedule name '%s' is reserved and can not be used
GW_SCHEDULES_NAME_RESERVED_INVALID,%s' 是保留的计划名称并且不能使用。
#From:LW12,Add Wireless Station
LW12,添加无线工作站
#From:YM75,Windows Media Center
YM75,Windows Media Center
#From:GW_ROUTES_GATEWAY_IP_ADDRESS_INVALID,Route gateway IP %v is invalid
GW_ROUTES_GATEWAY_IP_ADDRESS_INVALID,路由网关IP %v 无效
#From:GW_WLAN_WPA_REKEY_TIME_INVALID,WPA Group Key Update Interval should be between 30 and 65535 seconds.
GW_WLAN_WPA_REKEY_TIME_INVALID,WPA 组密码更新间隔应该在30秒到65535秒之间。
#From:bws.msg.WEP.1,WEP is the wireless encryption standard. To use it you must enter the same key(s) into the router and the wireless stations. For 64 bit keys you must enter 10 hex digits into each key box. For 128 bit keys you must enter 26 hex digits into each key box. A hex digit is either a number from 0 to 9 or a letter from A to F. For the most secure use of WEP set the authentication type to "Shared Key" when WEP is enabled.
bws.msg.WEP.1,WEP 是无线加密标准。要使用它您必须为路由器和无线工作站输入相同的密码。对于64位密码，您在每个密码框中必须输入10位十六进制数。对于128位密码，您必须在每个密码框中输入26位十六进制数。一个十六进制位可以是数字0到9或者字母A到F。为了达到使用WEP的最大安全，要在启用WEP时将认证类型设置为“共享密码” 。
#From:KR58,Enabling L2 (Layer 2) Isolation prevents associated wireless clients from communicating with each other.
KR58,启用L2（2层）隔离防止连接的无线客户端互相通信。
#From:.aa.bsecure.gambling,Gambling
.aa.bsecure.gambling,赌博
#From:KR14,Bridge Mode
KR14,网桥模式
#From:GW_SMTP_FROM_ADDRESS_INVALID,The given FROM address (%s) is invalid
GW_SMTP_FROM_ADDRESS_INVALID,给定的FROM地址（%s）无效
#From:KR89,Indicates how network hosts are to perform NetBIOS name registration and discovery.
KR89,说明网络主机怎样执行NetBIOS名称注册和发现。
#From:help106,Netmask:
help106,网络掩码：
#From:LW35,When configuring the router to access the Internet, be sure to choose the correct <strong>Internet Connection Type</strong> from the drop down menu. If you are unsure of which option to choose, contact your <strong>Internet Service Provider (ISP)</strong>.
LW35,在配置路由器访问Internet时，请确认从下拉菜单中选择了正确的<strong>Internet 连接类型</strong> 。如果您不能确定选择的选项，请联系您的<strong>Internet Service Provider (ISP)</strong>。
#From:YM151,Voice (most urgent).
YM151,声音 （最紧急）。
#From:YM2,Your changes have been saved. The router must be rebooted for the changes to take effect. You can reboot now, or you can continue to make other changes and reboot later.
YM2,您的修改已经保存。路由器必须重新启动以使修改生效。您可以立即重新启动，或者您可以继续进行其他的修改然后再重新启动。
#From:ta.wcn.note,Note: refer to <a href="../Help/Tools.shtml#wcn" onclick="return jump_if();" style="white-space: nowrap;">Help -> Tools</a> for possible limitations regarding this feature.
ta.wcn.note,注意：对于和该特性相关的可能的限制，请参考<a href="../Help/Tools.shtml#wcn" onclick="return jump_if();" style="white-space: nowrap;">帮助 &rarr; 工具 。
#From:YM131,The router configuration was changed by something else during wizard operation.\nWizard function will be cancelled, please try again.
YM131,由于其他某些原因，路由器配置在向导运行过程中已经改变。向导功能将被取消，请重试。
#From:GW_WEB_SERVER_SAME_PORT_LAN,HTTP and HTTPS cannot occupy the same LAN port.
GW_WEB_SERVER_SAME_PORT_LAN,HTTP 和 HTTPS 不能占用相同的LAN端口。
#From:KR25,Session Time Out
KR25,会话超时。
#From:YM3,Reboot Now
YM3,立即重新启动
#From:GW_NAT_WOL_ALG_ACTIVATED_WARNING,<warn>The Wake-On-LAN ALG has been automatically enabled because a virtual server entry you created requires it.</warn>
GW_NAT_WOL_ALG_ACTIVATED_WARNING,<warn> 由于您建立的一个虚拟服务器条目的需要，网络唤醒功能已自动启用。</warn>
#From:YM20,Invalid Destination IP range for Port Filter
YM20,针对端口过滤的无效目的IP范围。
#From:YM141,Enable this option if you want to allow WISH to prioritize your traffic.
YM141,如果您想要允许WISH以便优先处理您的流量，请启用该选项。
#From:GW_WAN_MAC_ADDRESS_INVALID,Invalid WAN MAC address: %m
GW_WAN_MAC_ADDRESS_INVALID,无效WAN MAC地址：%m
#From:IPSMTPCLIENT_MSG_WRONG_RECEPIENT_ADDR_FORMAT,recepient email address is in wrong format
IPSMTPCLIENT_MSG_WRONG_RECEPIENT_ADDR_FORMAT,接收的email 地址格式错误
#From:YM146,WISH supports overlaps between rules. If more than one rule matches for a specific message flow, the rule with the highest priority will be used.
YM146,WISH 支持规则间的重叠。如果有一个以上的规则与一个特定的信息流相符合，则使用优先级最高的规则。
#From:LS151,Configuration Warnings
LS151,配置警告
#From:GW_QOS_RULES_NAME_INVALID,Name can not be empty string.
GW_QOS_RULES_NAME_INVALID,名称不能为空。
#From:GW_NAT_VS_PROTO_CONFLICT_INVALID,'%s' [protocol:%d]->%v conflicts with '%s' [protocol:%d]->%v.
GW_NAT_VS_PROTO_CONFLICT_INVALID,%s' [协议：%d]->%v 和 '%s' [协议：%d]->%v冲突。
#From:GW_WISH_RULES_NAME_INVALID,Name can not be empty string.
GW_WISH_RULES_NAME_INVALID,名称不能为空。
#From:WIFISC_IR_REGISTRATION_FAIL,Adding wireless station %m failed, reason: %s, err_code %u
WIFISC_IR_REGISTRATION_FAIL,添加无线工作站%m失败，原因： %s, err_code %u
#From:r.rlist,ROUTE LIST
r.rlist,路由表
#From:KR18,Enter an 8- to 63-character alphanumeric pass-phrase.
KR18,输入一个8到63个字母的口令。
#From:bws.WKL.1,128 bit (26 hex digits)
bws.WKL.1,128位 （26位十六进制数）
#From:sa.Originator,Originator
sa.Originator,始发者
#From:aw.erpe,Extra Wireless Protection
aw.erpe,额外的无线保护
#From:GW_NAT_PORT_FORWARD_RANGE_BOTH_EMPTY_INVALID,Port ranges can not be both empty.
GW_NAT_PORT_FORWARD_RANGE_BOTH_EMPTY_INVALID,两个端口范围框都不能为空。
#From:GW_ROUTES_GATEWAY_IP_ADDRESS_IN_SUBNET_INVALID,Route gateway IP %v is not in interface subnet
GW_ROUTES_GATEWAY_IP_ADDRESS_IN_SUBNET_INVALID,路由网关IP %v 没有在子网接口中。
#From:LW37,Wireless Wizard
LW37,无线向导
#From:tsc.pingdisallowed,This feature is disabled when logged in as User
tsc.pingdisallowed,当以用户身份登录时该特性被禁用。
#From:ZM20,To save the configuration, click the <strong>Save Configuration</strong> button.
ZM20,要保存该配置，单击 <strong>保存配置</strong>按钮。
#From:help376,Cipher Type:
help376,密码类型：
#From:GW_FW_NOTIFY_EMAIL_DISABLED_INVALID,Email Notification is not enabled on Tools->Email Settings page but Email Notification of New Firmware Version is enabled in Tools->Firmware page.
GW_FW_NOTIFY_EMAIL_DISABLED_INVALID,Email 告知没有在工具->Email 设置页面中启用，但是新固件版本的Email告知在工具->固件页面中已启用。
#From:YM122,Invalid WEP Key
YM122,无效 WEP 密码
#From:GW_NAT_DMZ_CONFLICT_WITH_LAN_IP_INVALID,DMZ address %v can not be the same as the LAN IP address.
GW_NAT_DMZ_CONFLICT_WITH_LAN_IP_INVALID,DMZ地址 %v 不能和LAN IP地址相同。
#From:.sdi.s7,Incorrectly configured - check logs
.sdi.s7,配置不正确 - 检查日志
#From:at.title.SESet,QoS Engine Setup
at.title.SESet,QoS 引擎设置
#From:GW_INET_ACL_START_PORT_INVALID,Start port must be less than end port: %d-%d.
GW_INET_ACL_START_PORT_INVALID,起始端口必须小于结束端口：%d-%d。
#From:IPSMTPCLIENT_DATA_FAILED,failed to send email data
IPSMTPCLIENT_DATA_FAILED,无法发送email 数据
#From:KR91,M-Node (default), this indicates a Mixed-Mode of operation. First Broadcast operation is performed to register hosts and discover other hosts, if broadcast operation fails, WINS servers are tried, if any. This mode favours broadcast operation which may be preferred if WINS servers are reachable by a slow network link and the majority of network services such as servers and printers are local to the LAN.
KR91,M-Node （缺省），这表示一个混合工作模式。第一个广播操作用于注册主机和发现其他主机 ，如果广播操作失败，在有WINS服务器时将尝试WINS服务器。如果WINS服务器只能通过一条低速连接来访问并且诸如服务器和打印机等的大多数网络服务都在本地LAN中，则该模式帮助实现更受欢迎的广播操作。
#From:.aa.bsecure.opinion,Opinion
.aa.bsecure.opinion,选项
#From:tss.RestAll.b,Restore Factory Defaults
tss.RestAll.b,恢复出厂缺省设置
#From:GW_NAT_PORT_TRIGGER_CONFLICT_INVALID,%s of '%s' [%s:%s]->%s conflicts with '%s' [%s:%s]->%s.
GW_NAT_PORT_TRIGGER_CONFLICT_INVALID,%s of '%s' [%s:%s]->%s 与 '%s' [%s:%s]->%s冲突。
#From:LW54,Fragmentation will occur when frame size in bytes is greater than the Fragmentation Threshold.
LW54,当帧的字节大小大于分段临界值时将进行分段。
#From:TA7,If you already have a DHCP server on your network or are using static IP addresses on all the devices on your network, uncheck <strong>Enable DHCP Server </strong> to disable this feature.
TA7,如果您已经在您的网络中有一个DHCP服务器或者正在您网络中的所有设备上使用静态IP地址，则不选中<strong>启用DHCP服务器 </strong> 以便禁用该特性。
#From:KR74,The IP address of the this device on the local area network.
KR74,该设备在本地局域网中的IP 地址。
#From:bws.DFWK,Default WEP Key
bws.DFWK,缺省WEP密码
#From:LW46,If you are new to wireless networking and have never configured a wireless router before, click on <strong>Wireless Network Setup Wizard</strong> and the router will guide you through a few simple steps to get your wireless network up and running.
LW46,如果您是第一次接触无线网络并且从未配置过无线路由器，单击<strong>无线网络设置向导</strong> ，路由器将 带您通过几个简单的步骤来设置您的无线网络并使之运行。
#From:IPSMTPCLIENT_RESOLVED_DNS,SMTP (Email) server %s is at IP address %v
IPSMTPCLIENT_RESOLVED_DNS,SMTP （Email）服务器 %s IP地址是 %v
#From:help110,Interface:
help110,接口：
#From:YM107,Invalid PPTP gateway IP address
YM107,无效 PPTP 网关 IP地址
#From:YM180,The timeout value cannot be greater than 8760.
YM180,超时值不能大于8760。
#From:GW_WAN_WAN_SUBNET_INVALID,Invalid WAN subnet mask %v
GW_WAN_WAN_SUBNET_INVALID,无效 WAN 子网掩码%v
#From:GW_NAT_DMZ_DISABLED_WARNING,<warn>DMZ is disabled because the LAN subnet has been changed.</warn>
GW_NAT_DMZ_DISABLED_WARNING,<warn>由于LAN子网地址被改变，DMZ被禁用。</warn>
#From:YM93,Do you want to disable the DHCP Reservation entry for IP Address
YM93,您希望禁用DHCP的IP地址保留条目吗
#From:GW_NAT_FTP_ALG_ACTIVATED_WARNING,<warn>The FTP ALG has been automatically enabled because a virtual server entry you created requires it.</warn>
GW_NAT_FTP_ALG_ACTIVATED_WARNING,<warn>由于您建立的一个虚拟服务器的需要，FTP ALG自动启用。</warn>
#From:.aa.bsecure.free_host,Free Host
.aa.bsecure.free_host,空闲主机
#From:.r.alert2,Invalid Netmask for route
.r.alert2,无效的路由网络掩码
#From:LS47,Invalid MAC Address
LS47,无效MAC 地址
#From:GW_DHCP_SERVER_SUBNET_SIZE_INVALID,LAN subnet mask leaves no addresses for DHCP server to use.
GW_DHCP_SERVER_SUBNET_SIZE_INVALID,LAN子网掩码没有为DHCP提供可用的地址。
#From:GW_INET_ACCESS_POLICY_TOO_MANY_MAC_INVALID,You cannot add new MAC address %m. You can only reuse MAC addresses from other policies.
GW_INET_ACCESS_POLICY_TOO_MANY_MAC_INVALID,您不能添加新的MAC地址%m。您只能以其他方法重新使用MAC地址。
#From:GW_FIREWALL_START_IP_ADDRESS_INVALID,Start IP address must be less than end IP address: %v-%v
GW_FIREWALL_START_IP_ADDRESS_INVALID,起始 IP 地址必须小于结束IP地址：%v-%v
#From:YM8,seconds.
YM8,秒。
#From:GW_WISH_RULES_PRIORITY_RANGE,'%s': Priority, %u, needs to be between 0 and 7
GW_WISH_RULES_PRIORITY_RANGE,%s': 优先级，%u, 需要在0到7之间
#From:.aa.bsecure.travel,Travel
.aa.bsecure.travel,移动
#From:help113,The route metric is a value from 1 to 16 that indicates the cost of using this route. A value of 1 is the lowest cost, and 15 is the highest cost. A value of 16 indicates that the route is not reachable from this router. When trying to reach a particular destination, computers on your network will select the best route, ignoring unreachable routes.
help113,路由度量是一个从1到16的值，表示使用该路由的花销。数值1是最低花销，15是最高花销。数值16表示该路由器无法到达该路由。当尝试到达一个特定的目的地时，您网络中的计算机将选择最佳路由，忽略不可到达的路由。
#From:ZM6,BigPond Client
ZM6,BigPond 客户端
#From:bws.length,(length applies to all keys)
bws.length,（应用于所有密码的长度)
#From:help836,The WCN ActiveX Control provides the necessary WCN link between the router and your PC via the browser. The browser will attempt to download the WCN ActiveX Control, if it is not already available on your PC. For this action to succeed, the WAN connection must be established, and the browser's internet security setting must be Medium or lower (select Tools &rarr; Internet Options &rarr; Security &rarr; Custom Level &rarr; Medium).
help836, WCN ActiveX 控件通过浏览器为路由器和您的计算机之间提供必要的WCN连接。如果在您的计算机上还没有该控件，浏览器将尝试下载WCN ActiveX控件。为了成功执行该操作，必须建立WAN连接，并且浏览器的Internet设置必须为中或低（选择工具&rarr; Internet 选项 &rarr; 安全 &rarr; 自定义级别 &rarr; 中）。
#From:rs.intro.2,Try the restore again with valid restore configuration file.
rs.intro.2,使用有效的恢复配置文件再次尝试恢复。
#From:GW_INET_ACL_IP_ADDRESS_DUPLICATION_INVALID,IP address %v already exists.
GW_INET_ACL_IP_ADDRESS_DUPLICATION_INVALID,IP地址 %v 已存在。
#From:KR7,You must be logged in as Administrator to use these features.
KR7,您必须以管理员的身份登录，以便使用这些特性。
#From:ZM1,(automatically disabled if UPnP is enabled)
ZM1,（如果启用了UPnP，则自动被禁用）
#From:hhta.831,Select a filter that controls access as needed for this admin port. If you do not see the filter you need in the list of filters, go to the <a href="../Advanced/Inbound_Filter.shtml" onclick="return jump_if();">Advanced → Inbound Filter</a> screen and create a new filter.
hhta.831,为了满足该管理端口的需要而选择一个控制访问的过滤规则。如果您在过滤列表中没有看到你需要的过滤规则，请到 <a href="../Advanced/Inbound_Filter.shtml" onclick="return jump_if();">高级 → 内部过滤 </a> 窗口并创建一个新的过滤规则。
#From:LW30,Manual Internet Connection Setup
LW30,手动设置Internet连接
#From:YM110,Invalid L2TP subnet mask
YM110,无效L2TP 子网掩码
#From:bd.NETBIOS_REG_TYPE_P,Point-to-Point (no broadcast)
bd.NETBIOS_REG_TYPE_P,点对点 （无广播）
#From:GW_LAN_SUBNET_MASK_INVALID,LAN subnet mask is invalid.
GW_LAN_SUBNET_MASK_INVALID,LAN 子网掩码无效。
#From:YM88,No more reservations may be created
YM88,无法创建更多的保留项
#From:GW_DHCP_SERVER_NETBIOS_PRIMARY_WINS_INVALID,Invalid primary WINS IP address
GW_DHCP_SERVER_NETBIOS_PRIMARY_WINS_INVALID,无效住WINS IP地址
#From:YM187,Name (if any)
YM187,名称（如果有的话）
#From:GW_NAT_NAME_UNDEFINED_INVALID,%s name %s of '%s' is not defined.
GW_NAT_NAME_UNDEFINED_INVALID,%s 名称 %s of '%s' 没有定义
#From:GW_WIRELESS_RADAR_DETECTED,Wireless radar detected on channel %d
GW_WIRELESS_RADAR_DETECTED,在信道 %d上检测到无线雷达信号
#From:LW25,Pre-shared Key
LW25,预共享密码
#From:.rs.invalid,Restore Invalid
.rs.invalid,恢复无效
#From:YM113,Invalid primary DNS server IP address
YM113,无效猪DNS服务器IP地址
#From:LW65,Wi-FI Protected Setup
LW65,Wi-FI 保护安装
#From:KR41,Select this option if your wireless device supports push button
KR41,如果您的无线设备支持按钮则选择该选项。
#From:GW_WAN_DNS_SERVER_PRIMARY_INVALID,Invalid primary DNS server IP address: %v
GW_WAN_DNS_SERVER_PRIMARY_INVALID,无效首选DNS IP地址：%v
#From:KR21,The Wireless Device PIN is not valid
KR21,无线设备PIN码无效
#From:.aa.bsecure.personals,Personals
.aa.bsecure.personals,个人
#From:KR63,The <span class="option">Router IP Address</span> field below must be set to the IP address of this device. The <span class="option">Gateway</span> must be set to the IP address of the upstream router. Both addresses must be within the LAN subnet as specified by <span class="option">Subnet Mask</span>.
KR63, 下面的<span class="option">路由器IP地址</span>框 必须设置为该设备的IP地址。 <span class="option">网关</span> 必须设置为上游路由器的IP地址。两个地址都必须在由<span class="option">子网掩码</span>指定的LAN子网内。
#From:LW31,The following Web-based Setup Wizard is designed to assist you in your printer setup. This Setup Wizard will guide you through step-by-step instructions on how to set up your printer.
LW31,以下基于Web的设置向导用于帮助您设置打印机。该设置向导将通过一步步的指示带领您设置好您的打印机。
#From:GW_WAN_DNS_SERVER_SECONDARY_INVALID,Invalid secondary DNS server IP address: %v
GW_WAN_DNS_SERVER_SECONDARY_INVALID,无效备选DNS服务器IP地址：%v
#From:LW29,If you would like to configure the Internet settings of your new D-Link Systems Router manually, then click on the button below.
LW29,如果您想要手动配置你的新D-Link系统路由器的Internet设置，则单击下面的按钮。
#From:YM55,Invalid remote end IP Address.
YM55,无效远程终端IP地址。
#From:KR37,For information on which configuration method your wireless device support, please refer to the adapters' documentation.
KR37,关于您的无线设备支持的配置模式信息，请参见适配器文档。
#From:KR80,Check this box to allow the DHCP Server to offer NetBIOS configuration settings to the LAN hosts.
KR80,选中该多选框来允许DHCP服务器为LAN主机提供 NetBIOS 配置设置。
#From:YM100,Invalid WAN subnet mask
YM100,无效WAN子网掩码
#From:.wakeonlan,Wake-On-LAN
.wakeonlan,网络唤醒
#From:rs.intro.3,The device may be too busy to properly receive it right now. Please try the restore again. It is also possible that you are logged in as a 'user' instead of an 'admin' - only administrators can restore the configuration file. Please check the system log for any errors.
rs.intro.3,当前该设备可能太忙而无法正常接收。请再次尝试恢复。也可能您是“user”登录而不是“admin”登录-只有管理员才能恢复配置文件。请检查系统日志是否有错。
#From:YM47,PalTalk
YM47,PalTalk
#From:YM7,You will be redirected to the login page in:
YM7,您将会转到登录页面：
#From:YM124g,If you are not utilizing Super G with Dynamic Turbo for its speed improvements, enable Auto Channel Scan so that the router can select the best possible channel for your wireless network to operate on.
YM124g,如果您没有使用带有Dynamic Turbo的并提升了速度的Super G，请启用自动信道扫描以便路由器为您的无线网络正常工作而选择最好的信道。
#From:GW_INET_ACL_MAC_ADDRESS_DUPLICATION_INVALID,MAC address %m already exists.
GW_INET_ACL_MAC_ADDRESS_DUPLICATION_INVALID,MAC地址%m 已经存在。
#From:YM66,invalid destination starting IP Address.
YM66,无效目的地起始IP地址。
#From:LT124,optional
LT124,可选
#From:bd.NETBIOS,NetBIOS Advertisement
bd.NETBIOS,NetBIOS 通告
#From:sa.Target,Target
sa.Target,目标
#From:help56.a,This section is where you define application rules.
help56.a,在该部分您可以定义应用规则。
#From:GW_DHCP_SERVER_RECONFIG_WARNING,<warn>DHCP Server is being reconfigured because the LAN subnet is not suitable, please ensure your server remains correct.</warn>
GW_DHCP_SERVER_RECONFIG_WARNING,<warn>由于LAN子网不匹配，DHCP 服务器正在重新配置，请确认您的服务器工作正常。</warn>
#From:.wifisc.addfail,Failed
.wifisc.addfail,失败
#From:GW_WLAN_BEACON_PERIOD_INVALID,Beacon period should be between 20 and 1000.
GW_WLAN_BEACON_PERIOD_INVALID,信标周期应该在20和1000之间。
#From:YM79,Best Effort (BE)
YM79,最大努力 （BE）
#From:YM32,Invalid Aggregation Max Size
YM32,无效聚集最大尺寸
#From:ta.intro.wcn,This will save the current wireless configuration from the router to your computer through Microsoft's Windows Connect Now technology and allow future propagation of the setting through Microsoft's Wireless Network Setup Wizard.
ta.intro.wcn,这将通过Microsoft的Windows Connect Now技术把路由器上的当前无线配置保存到您的计算机中并通过Microsoft的无线网络设置向导来允许在将来传播该设置。
#From:wwl.text.better,Select this option if your wireless adapters SUPPORT WPA
wwl.text.better,如果您的无线适配器支持WPA，则选择该选项。
#From:YM78,Background (BK)
YM78,背景（BK）
#From:sd.channel,Channel
sd.channel,信道
#From:KR53,Note that different LAN computers cannot be associated with Port Forwarding rules that contain any ports in common; such rules would contradict each other.
KR53,请注意不同LAN中的计算机不能与包含了任何共有端口的端口转发规则产生关联；这样的规则将互相矛盾。
#From:LW16,<strong>Lock Wireless Security Settings</strong> after all wireless network devices have been configured.
LW16,在所有无线网络设备完成配置后<strong>锁定无线安全设置</strong> 。
#From:GW_NAT_TCP,TCP
GW_NAT_TCP,TCP
#From:help202,This router has a USB port; so, if you have a USB flash drive, a USB port on your PC, and your PC runs Windows XP Service Pack 2 (SP2) or later, you can transfer wireless configuration data between your PC and the router with the USB flash drive. Go to the Windows Control Panel and select Wireless Network Setup Wizard. The Wireless Network Setup Wizard gives you the choices: "Use a USB flash drive" and "Set up a network manually". Select "Use a USB flash drive".
help202,该路由器有一个USB端口，因此，如果您有USB闪存，在您的计算机上有一个USB端口，并且您的计算机运行的是Windows XP Service Pack 2 (SP2)或更高版本，您就可以用USB闪存在您的计算机和路由器之间传送无线配置数据。进入Windows控制面板并选择无线网络设置向导。该无线网络设置向导给您几个选择：“使用USB闪存”和“手动设置一个网络”。选择“使用USB闪存”。
#From:CRIT,[CRIT]
CRIT,[CRIT]
#From:YM154,The rule applies to a flow of messages for which the other computer's IP address falls within the range set here.
YM154,该规则应用到与其他计算机相关的信息流上，而这些计算机的IP地址存在于这里设置的范围内。
#From:help76,The QoS Engine feature helps improve your network performance by prioritizing applications.
help76,QoS 引擎特性通过对应用进行优先排序能提高您的网络性能。
#From:GW_WISH_RULES_HOST1_PORT,'%s': Host 1 port start, %u, must be less than host 1 port end, %u
GW_WISH_RULES_HOST1_PORT,%s': 主机1起始端口， %u，必须小于主机1结束端口，%u
#From:GW_WLAN_11G_TURBO_INVALID,For 11g Turbo mode, the channel should be set to 6.
GW_WLAN_11G_TURBO_INVALID,对于11g Turbo 模式，信道应该设置为6。
#From:.aa.bsecure.entertainment,Entertainment
.aa.bsecure.entertainment,娱乐
#From:YM165,Inactive
YM165,不活动的
#From:help48,Enter a name for the Special Application Rule, for example <code>Game App</code>, which will help you identify the rule in the future. Alternatively, you can select from the <span class="option">Application</span> list of common applications.
help48,为特殊应用规则输入一个名称，例如<code>Game App</code>，它将帮助您在以后区别规则。或者您可以从普通应用中的<span class="option">Application</span>列表中选择。
#From:.aa.bsecure.lifestyles,Lifestyles
.aa.bsecure.lifestyles,生活模式
#From:GW_NAT_DMZ_NOT_IN_SUBNET_INVALID,DMZ address should be within LAN subnet(%v).
GW_NAT_DMZ_NOT_IN_SUBNET_INVALID,DMZ 地址应该在LAN子网内（%v）。
#From:sd.TMode,Turbo Mode
sd.TMode,Turbo 模式
#From:GW_NAT_PORT_FORWARD_PORT_RANGE_INVALID,%s port range '%s' of '%s' is invalid.
GW_NAT_PORT_FORWARD_PORT_RANGE_INVALID,%s 端口 '%s' of '%s' 无效
#From:GW_INET_ACL_NO_FILTER_SELECTED_INVALID,Please select a filter.
GW_INET_ACL_NO_FILTER_SELECTED_INVALID,请选择一个过滤规则。
#From:GW_QOS_RULES_LOCAL_IP_END_SUBNET,'%s': Local IP end '%v' is not in the LAN subnet
GW_QOS_RULES_LOCAL_IP_END_SUBNET,%s': 本地结束IP '%v' 不在LAN子网内。
#From:bws.CT.2,AES
bws.CT.2,AES
#From:.bsecure.parental.limits,Note that it is not possible to control access to web sites that use the secure HTTP protocol; that is, those whose URL is of the form <code>https://...</code>.
.bsecure.parental.limits,请注意对使用安全HTTP协议的web站点不能进行访问控制；即那些URL是<code>https://...</code>格式的站点。
#From:aw.64,64 Kbytes
aw.64,64 Kbytes
#From:.aa.bsecure.humor,Humor
.aa.bsecure.humor,幽默
#From:KR92,P-Node, this indicates to use WINS servers ONLY. This setting is useful to force all NetBIOS operation to the configured WINS servers. You must have configured at least the primary WINS server IP to point to a working WINS server.
KR92,P-Node表明只使用WINS服务器。该设置有助于强制所配置WINS服务器进行所有的NetBIOS 操作。
#From:KR13,Router Mode
KR13,路由器模式
#From:GW_INET_ACL_POLICY_NAME_DUPLICATE_INVALID,Policy name can't be duplicated: %s.
GW_INET_ACL_POLICY_NAME_DUPLICATE_INVALID,策略名称不能复制：%s
#From:YM136,The NAT does not forward any incoming connection requests with the same port address as an already establish connection.
YM136,NAT不会在已经建立连接时转发进入的带有相同端口地址的 连接请求。
#From:TA3,Hardware Version
TA3,硬件版本
#From:help360,Super G without Turbo:
help360,不带Turbo的Super G：
#From:YM10,Warnings
YM10,警告
#From:GW_WAN_PPTP_SERVER_IP_ADDRESS_INVALID,Invalid PPTP server IP address: %v
GW_WAN_PPTP_SERVER_IP_ADDRESS_INVALID,无效 PPTP服务器IP 地址：%v
#From:YM150,Video.
YM150,视频。
#From:GW_DHCP_SERVER_RESERVATION_IN_USE,The IP address %v is in use; you must Revoke its lease and reset the network settings for the device that uses it.
GW_DHCP_SERVER_RESERVATION_IN_USE, IP 地址%v正在使用；您 必须撤消其租用并重新设置使用该地址的设备。
#From:GW_NAT_INPUT_PORT,Firewall Port
GW_NAT_INPUT_PORT,防火墙端口
#From:WIFISC_AP_REBOOT_COMPLETE,Reboot by %s complete
WIFISC_AP_REBOOT_COMPLETE,通过 %s重新启动完成
#From:YM182,Latest Firmware Version
YM182,最新固件版本
#From:LW3,1000Mbps
LW3,1000Mbps
#From:YM116,WPA Personal Key must be at least 8 characters.
YM116,WPA 个人密码至少必须有8个字符。
#From:LW22,WEP Key
LW22,WEP 密码
#From:OPEN,Open
OPEN,打开
#From:YM158,WISH Sessions
YM158,WISH 会话
#From:ZM16,Send/Receive instance failure
ZM16,发送/接收实例失败
#From:.aa.bsecure.select.age,Select Age Category
.aa.bsecure.select.age,选择期限类别
#From:GW_ROUTES_DESTINATION_IP_ADDRESS_INVALID,Route destination IP %v is invalid
GW_ROUTES_DESTINATION_IP_ADDRESS_INVALID,路由目的IP %v 无效
#From:WIFISC_AP_RESET_COMPLETE,Reset by %s complete
WIFISC_AP_RESET_COMPLETE,通过 %s 重新设置完成
#From:bd.NETBIOS_REG,NetBIOS Registration mode
bd.NETBIOS_REG,NetBIOS 注册模式
#From:GW_LAN_GATEWAY_IP_ADDRESS_INVALID,LAN Gateway IP address is invalid.
GW_LAN_GATEWAY_IP_ADDRESS_INVALID,LAN网关IP地址无效。
#From:KR96,Saves the new or edited Schedule Rule.
KR96,保存新的或编辑的计划规则。
#From:GW_XML_CONFIG_GET_SUCCESS,Successfully exported configuration file
GW_XML_CONFIG_GET_SUCCESS,S成功导出配置文件。
#From:.ask.nochange,Nothing has changed, save anyway?
.ask.nochange,没有做出修改，仍然保存吗？
#From:GW_UPNP_IGD_PORTMAP_REFRESH,UPnP renew entry %v <-> %v:%d <-> %v:%d %s timeout:%d '%s'
GW_UPNP_IGD_PORTMAP_REFRESH,UPnP刷新条目 %v <-> %v:%d <-> %v:%d %s 超时：%d '%s'
#From:bws.msg.WPA.2,To achieve better wireless performance use <strong>WPA2 Only</strong> security mode (or in other words AES cipher).
bws.msg.WPA.2,要达到更好的无线性能，则使用<strong>只使用WPA2</strong> 安全模式 （或换句话就是AES密码）。
#From:GW_LAN_IP_ADDRESS_INVALID,LAN IP address is invalid.
GW_LAN_IP_ADDRESS_INVALID,LAN IP地址无效。
#From:KR5,Remote IP Start
KR5,远程起始 IP
#From:help88c,The QoS Engine supports overlaps between rules, where more than one rule can match for a specific message flow. If more than one rule is found to match the rule with the highest priority will be used.
help88c,QoS引擎支持规则重叠，即可以有一个以上的规则与一个特定的信息流相符合。如果发现有一个以上的规则符合，则将使用优先级最高的规则。
#From:GW_INET_ACL_SCHEDULE_NAME_INVALID,Schedule name %s is not defined.
GW_INET_ACL_SCHEDULE_NAME_INVALID,计划名称 %s 没有定义。
#From:GW_QOS_RULES_REMOTE_PORT,'%s': Remote port start, %u, must be less than remote port end, %u
GW_QOS_RULES_REMOTE_PORT,%s'：远程起始端口，%u，必须小于远程结束端口，%u
#From:GW_NAT_IP_ADDRESS_INVALID,IP address for '%s' should be within LAN subnet (%v).
GW_NAT_IP_ADDRESS_INVALID,%s'的IP地址应该在LAN子网内（%v）。
#From:help369,128-bit hexadecimal keys are exactly 26 characters in length. (456FBCDF123400122225271730 is a valid string of 26 characters for 128-bit encryption.)
help369,128位十六进制数密码正好有26个字符长度。(456FBCDF123400122225271730 是128位加密的有效26个字符的字符串。）
#From:help48a,Instead of entering a name for the Special Application rule, you can select from this list of common applications, and the remaining configuration values will be filled in accordingly.
help48a,除了为特殊的应用规则输入一个名称，您还可以从这个普通应用的列表中选择，并且相应的输入剩下的配置数值。
#From:LW38,Wireless Settings
LW38,无线设置
#From:GW_DYNDNS_USER_NAME_INVALID,user account must be specified
GW_DYNDNS_USER_NAME_INVALID,必须指定用户帐户。
#From:hhav.r_dest_ip,The destination IP address is the address of the host or network you wish to reach.
hhav.r_dest_ip,目的 IP 地址是您想要到达的主机或网络的地址。
#From:YM175,The remote admin port number is not valid.
YM175,远程 admin端口号无效。
#From:LY3,Wi-Fi Protected Setup is used to easily add devices to a network using a PIN or button press. Devices must support Wi-Fi Protected Setup in order to be configured by this method.
LY3,Wi-Fi 保护安装用于通过一个PIN码或按钮轻松的向网络添加设备。为了在这个模式中进行配置，设备必须支持Wi-Fi 保护安装。
#From:GW_UPNP_IGD_PORTMAP_ADD,UPnP added entry %v <-> %v:%d <-> %v:%d %s timeout:%d '%s'
GW_UPNP_IGD_PORTMAP_ADD,UPnP添加条目%v <-> %v:%d <-> %v:%d %s 超时。%d '%s'
#From:GW_UPNP_IGD_PORTMAP_CONFLICT,UPnP conflict with existing entry %v <-> %v:%d <-> %v:%d %s '%s'
GW_UPNP_IGD_PORTMAP_CONFLICT,UPnP 与已有的条目冲突 %v <-> %v:%d <-> %v:%d %s '%s'
#From:KRA1,Message
KRA1,信息
#From:.vs.port,Port
.vs.port,端口
#From:GW_INET_ACL_RECONFIGURED_WARNING,<warn>Access Control Table is being reconfigured because the LAN subnet has been changed.</warn>
GW_INET_ACL_RECONFIGURED_WARNING,<warn>由于LAN子网已改变，访问控制列表正在重新配置。</warn>
#From:help80b,Enables the router to recognize certain audio and video streams generated by a Windows Media Center PC and to prioritize these above other traffic. Such streams are used by systems known as Windows Media Extenders, such as the Xbox 360.
help80b,让路由器能识别来自Windows Media Center计算机的特定音频和视频流，并能在其他流量之上优先处理。这些数据流是由所谓的Windows Media Extenders使用的，比如Xbox 360。
#From:YM145,For most applications, the priority classifiers ensure the right priorities and specific WISH Rules are not required.
YM145,对于大多数应用，优先级分级器确认正确的优先级而不需要特定的WISH规则。
#From:WIFISC_AP_UNSET_SELECTED_REGISTRAR,Unset Selected Registrar
WIFISC_AP_UNSET_SELECTED_REGISTRAR,未设置所选的注册机
#From:GW_WAN_DNS_SERVER_SECONDARY_WITHOUT_PRIMARY_INVALID,Secondary DNS cannot be specified without giving a primary also.
GW_WAN_DNS_SERVER_SECONDARY_WITHOUT_PRIMARY_INVALID,未指定首选DNS前不能指定备选 DNS 。
#From:YM72,WISH (Wireless Intelligent Stream Handling) prioritizes the traffic of various wireless applications.
YM72,WISH （无线智能数据流处理）对各种无线应用的流量进行优先级排序。
#From:.hints,Helpful Hints
.hints,帮助提示
#From:GW_QOS_RULES_LOCAL_PORT,'%s': Local port start, %u, must be less than local port end, %u
GW_QOS_RULES_LOCAL_PORT,%s'：本地起始端口，%u，必须小于本地结束端口，%u
#From:YM52,Invalid local start IP Address.
YM52,无效本地起始IP地址。
#From:.aa.bsecure.chat,Chat
.aa.bsecure.chat,对话
#From:help104,Destination IP:
help104,目的IP：
#From:help839,Note that, in Microsoft's current implementation of WCN, you cannot save the wireless settings if a profile of the same name already exists. To work around this limitation, either delete the existing profile or change the SSID when you change the wireless settings; then, when you save the new settings, a new profile will be created.
help839,请注意，在当前执行的Microsoft WCN中，如果存在相同名称的配置文件，则您无法保存无线设置。为了不受该限制，可以删除已有的配置文件或当您改变无线设置时修改SSID；然后，当您保存新设置时，就建立了一个新的配置文件。
#From:YM99,Invalid WAN IP address
YM99,无效WAN IP地址
#From:.aa.bsecure.byage,By Age
.aa.bsecure.byage,根据时限
#From:GW_INET_ACL_NAME_DUPLICATE_INVALID,Name '%s' already exists.
GW_INET_ACL_NAME_DUPLICATE_INVALID,名称 '%s' 已存在。
#From:GW_DHCP_SERVER_POOL_TO_INVALID,The DHCP server end address %v is not valid in the LAN subnet %v.
GW_DHCP_SERVER_POOL_TO_INVALID,DHCP 服务器终端地址 %v 在LAN子网中无效 %v
#From:KR26,In progress
KR26,处理中
#From:YM92,Do you want to enable the DHCP Reservation entry for IP Address
YM92,您想要启用DHCP的IP地址保留条目吗
#From:GW_DHCP_SERVER_RESERVED_IP_INVALID,Reserved IP %v is invalid
GW_DHCP_SERVER_RESERVED_IP_INVALID,保留的IP%v无效
#From:help19x1,The common choices -- UDP, TCP, and both UDP and TCP -- can be selected from the drop-down menu.
help19x1,普通选项 -- UDP，TCP，UDP 和TCP -- 可以从下拉菜单中选择。
#From:.aa.bsecure.unstable,Unstable
.aa.bsecure.unstable,不稳定
#From:GW_DHCP_SERVER_RESERVED_IP_IN_POOL_INVALID,Reserved IP address %v should be within the configured DHCP range.
GW_DHCP_SERVER_RESERVED_IP_IN_POOL_INVALID,保留的IP地址%v 应该在所配置的DHCP范围内。
#From:GW_FIREWALL_FILTER_NAME_INVALID,Filter Rule '%s' can't be deleted or renamed because it is used.
GW_FIREWALL_FILTER_NAME_INVALID,由于在使用，过滤规则 '%s' 无法删除或重命名。
#From:ZM19,You might need this file so that you can load your configuration later in the event that the router's default settings are restored.
ZM19,您可能需要该文件以便您可以在路由器恢复了缺省设置时载入您的配置。
#From:YM80,Video (VI)
YM80,视频 （VI）
#From:bd.NETBIOS_WINS.2,Secondary WINS Server IP address
bd.NETBIOS_WINS.2,备选 WINS 服务器IP地址
#From:KR57,Re-initializes the Add/Update area of the screen, erasing any changes that you may have made prior to clicking the Add/Update button.
KR57,重新初始化打开添加/更新窗口区域，在单击添加/更新按钮前删除您做的任何修改。
#From:YM164,Active
YM164,活动的
#From:.logsyslog.alert2,IP address is not allowed
.logsyslog.alert2,IP地址被禁止
#From:YM149,Best Effort.
YM149,最大努力。
#From:LT120,Invalid DHCP Server lease time
LT120,无效DHCP 服务器租用时间
#From:KR48,Auto (WPA or WPA2) - Personal
KR48,自动（WPA或WPA2) - 个人
#From:GW_WAN_RECONNECT_INTERVAL_INVALID,Invalid Reconnect interval: %u (must be between 20 and 180)
GW_WAN_RECONNECT_INTERVAL_INVALID,无效重连间隔：%u （必须在20到180之间）
#From:YM139,Controls endpoint filtering for packets of the TCP protocol.
YM139,针对TCP协议数据包控制终点过滤。
#From:YM61,Remote start port should be between 0 and 65535 inclusive.
YM61,远程起始端口应该在0到65535之间。
#From:GW_NAT_VIRTUAL_SERVER_TABLE_RECONFIGURED_WARNING,<warn>Virtual Server Table is being reconfigured because the LAN subnet has been changed.</warn>
GW_NAT_VIRTUAL_SERVER_TABLE_RECONFIGURED_WARNING,<warn>由于LAN子网已改变，所以虚拟服务器表正在重新配置。</warn>
#From:YM1,Reboot needed
YM1,需要重新启动
#From:bws.WKL,WEP Key Length
bws.WKL,WEP 密码长度
#From:LY5,PIN Settings
LY5,PIN 设置
#From:KR102,Save Settings Succeeded
KR102,保存设置成功
#From:GW_QOS_RULES_LOCAL_IP_START_SUBNET,'%s': Local IP start '%v' is not in the LAN subnet
GW_QOS_RULES_LOCAL_IP_START_SUBNET,%s': 本地起始IP '%v' 不在LAN子网中。
#From:GW_WAN_PPTP_IP_ADDRESS_INVALID,Invalid PPTP IP address: %v
GW_WAN_PPTP_IP_ADDRESS_INVALID,无效PPTP IP 地址：%v
#From:.aa.bsecure.alcohol,Alcohol
.aa.bsecure.alcohol,Alcohol
#From:YM14,Port Filter rule names cannot be duplicated.
YM14,端口过滤规则名称不能复制。
#From:GW_WLAN_11B_DYNAMIC_TURBO_INVALID,Dynamic Turbo mode is not allowed with 802.11b.
GW_WLAN_11B_DYNAMIC_TURBO_INVALID,动态Turbo 模式不能在802.11b下工作。
#From:GW_UPNP_IGD_PORTMAP_EXPIRE,UPnP expired entry %v <-> %v:%d <-> %v%d %s '%s'
GW_UPNP_IGD_PORTMAP_EXPIRE,UPnP过期条目 %v <-> %v:%d <-> %v%d %s '%s'
#From:help107,One bits in the mask specify which bits of the IP address must match.
help107,掩码中的一位指定与IP地址中的相应位对比。
#From:aw.erpe.h2,This option is available only when <span class="option">802.11 Mode</span> is set to <span class="option">802.11ng only</span>.
aw.erpe.h2,该选项只有在<span class="option">802.11 模式</span> 设置为 <span class="option">只使用802.11ng</span>时才能选择。
#From:YM21,Invalid Destination Port Start for Port Filter
YM21,端口过滤的无效目的起始端口。
#From:YM147,The priority of the message flow is entered here. Four priorities are defined:
YM147,在此输入信息流的优先级。可定义4个优先级：
#From:KR68,When the log email option is set, log emails are sent to the Internet by way of the upstream router.
KR68,当设置了日志email 选项，日志email通过上游路由器发送到Internet 。
#From:LW61,This Wizard helps you add wireless devices to the wireless network.
LW61,该向导帮助您把无线设备添加到无线网络中。
#From:GW_WAN_L2TP_USERNAME_INVALID,A L2TP user name MUST be specified
GW_WAN_L2TP_USERNAME_INVALID,必须指定一个L2TP用户名。
#From:LT120z,Invalid Secondary WINS IP
LT120z,无效备选WINS IP。
#From:KR97,WPA/WPA2
KR97,WPA/WPA2
#From:GW_WAN_L2TP_SUBNET_INVALID,Invalid L2TP subnet mask %v
GW_WAN_L2TP_SUBNET_INVALID,无效 L2TP 子网掩码 %v
#From:help.ts.ss,Save Settings To Local Hard Drive
help.ts.ss,把设置保存到本地硬盘
#From:.aa.bsecure.automobile,Automobile
.aa.bsecure.automobile,汽车
#From:LW13,Add Wireless Device Wizard
LW13,添加无线设备向导
#From:sch.time,Time Frame
sch.time,时间帧
#From:bws.intro.WlsSec,To protect your privacy you can configure wireless security features. This device supports three wireless security modes, including WEP, WPA-Personal, and WPA-Enterprise. WEP is the original wireless encryption standard. WPA provides a higher level of security. WPA-Personal does not require an authentication server. The WPA-Enterprise option requires an external RADIUS server.
bws.intro.WlsSec,为了保护您的隐私，您可以配置无线安全特性。该设备支持3个无线安全模式，包括WEP，个人WPA-Personal和企业WPA。WEP是最初的无线加密标准。WPA提供一个更高级别的安全。个人WPA不需要认证服务器。企业WPA选项需要一个外部RADIUS服务器。 
#From:GW_WAN_PPPOE_PASSWORD_INVALID,A PPPoE password MUST be specified
GW_WAN_PPPOE_PASSWORD_INVALID,必须指定一个 PPPoE 密码。
#From:help211,Before you can use the router's WCN Wizard, you must first execute the Wireless Network Setup Wizard on your PC. If you have not already done so, go to the Windows Control Panel and select Wireless Network Setup Wizard. When the Wireless Network Setup Wizard gives you the choice to "Use a USB flash drive" or "Set up a network manually", choose the latter. (In fact, you will not have to do the set-up manually; it will be done with the WCN ActiveX Control.)
help211,在您可以使用路由器的 WCN向导前，您必须首先在您的计算机上执行无线网络设置向导。如果您已经这样做了，则进入Windows控制面板并选择无线网络设置向导。当无线网络设置向导让您选择“使用闪存”或“手动设置一个网络”，情选择后者。（实际上，您并不需要手动设置，这将由WCN ActiveX控件完成。）
#From:LS202,Invalid Subnet Mask
LS202,无效子网掩码
#From:tsc.end_time,End Time
tsc.end_time,结束时间
#From:KR34,This wizard will guide you through a step-by-step process to add your wireless device to your wireless network.
KR34,该向导将引导您通过一步步的过程来把您的无线设备添加到您的无线网络中。
#From:.wepkey3,WEP Key 3
.wepkey3,WEP 密码 3
#From:at.RePortR,Remote Port Range
at.RePortR,远程 Port 范围
#From:.vs.other,Other
.vs.other,其他
#From:GW_SMTP_SERVER_ADDRESS_INVALID,The given server address (%s) is invalid
GW_SMTP_SERVER_ADDRESS_INVALID,指定的服务器地址（%s）无效
#From:GW_WAN_L2TP_GATEWAY_IP_ADDRESS_INVALID,Invalid L2TP gateway IP address: %v
GW_WAN_L2TP_GATEWAY_IP_ADDRESS_INVALID,无效 L2TP 网关IP地址：%v
#From:LW58,Shows the current value of the router's PIN.
LW58,显示路由器PIN码的当前值。
#From:LW22usekey,Key In Use
LW22usekey,正在使用的密码
#From:GW_WLAN_11B_STATIC_TURBO_INVALID,Static Turbo mode is not allowed with 802.11b.
GW_WLAN_11B_STATIC_TURBO_INVALID,静态 Turbo 模式不能在802.11b下工作。
#From:YM67,invalid destination ending IP Address.
YM67,无效目的地结束IP地址。
#From:GW_WIFISC_CFG_CHANGED_WARNING,<warn>Changing wireless security settings may cause Wi-Fi protected Setup to not function as expected.</warn>
GW_WIFISC_CFG_CHANGED_WARNING,<warn>改变无线安全设置可能导致 Wi-Fi 不能如预期一样工作。</warn>
#From:ZM10,Restart during DNS query
ZM10,在DNS询问前重新启动
#From:GW_WLAN_11A_CHANNEL_INVALID,Can not use 802.11b/g channel when the 802.11 mode is 802.11a.
GW_WLAN_11A_CHANNEL_INVALID,无法在802.11模式为802.11a的时候使用802.11 b/g信道。
#From:at.title.SERules,QoS Engine Rules
at.title.SERules,QoS 引擎规则。
#From:YM176,The remote admin port should be in the range of 1 to 65535.
YM176,远程 admin 端口应该在1到65535之间。
#From:KR81,NetBIOS allow LAN hosts to discover all other computers within the network, e.g. within Network Neighbourhood.
KR81,NetBIOS 允许主机发现网络中，即在网络邻居中的所有其他的计算机。
#From:GW_NAT_TCP_PORT,TCP Port
GW_NAT_TCP_PORT,TCP 端口
#From:YM155,The rule applies to a flow of messages for which host 2's port number is within the range set here.
YM155,该规则应用于和主机2的 端口号相关的信息流，主机2的 端口号存在于这里设置的范围中。
#From:help365,This mode is backwards compatible with non-Turbo (legacy) devices. This mode should be enabled when some devices on the wireless network are not Turbo enabled but support other Super G features mentioned above.
help365,该模式向下兼容非Turbo （旧的） 设备。当无线网络上的一些设备不支持Turbo但是支持上面提到的其他Super G 特性，则应该启用该模式。
#From:bd.NETBIOS_SCOPE,NetBIOS Scope
bd.NETBIOS_SCOPE,NetBIOS 范围
#From:KR28,Session Aborted
KR28,会话取消
#From:.webfilter,Web Filter
.webfilter,Web 过滤器
#From:YM33,Invalid Aggregation Num Packets
YM33,无效聚集Num 数据包
#From:YM76,Automatic
YM76,自动的
#From:WIFISC_AP_SETUP_UNLOCKED,Unlock AP setup
WIFISC_AP_SETUP_UNLOCKED,解开AP设置锁定
#From:GW_NAT_VS_PUBLIC_PORT_CAN_NOT_MATCH_HTTPS_ADMIN_PORT,Virtual server '%s' can not use the router's HTTPS WAN administration port, %u
GW_NAT_VS_PUBLIC_PORT_CAN_NOT_MATCH_HTTPS_ADMIN_PORT,虚拟服务器'%s' 不能使用路由器的HTTPS WAN管理端口，%u
#From:LS313,Release
LS313,释放
#From:bwz.WCNWz,Microsoft Windows Connect Now Wizard
bwz.WCNWz,Microsoft Windows Connect Now向导
#From:ZM9,DNS Lookup Login Server
ZM9,DNS 查找登录服务器
#From:GW_DHCP_SERVER_RESERVED_MAC_UNIQUENESS_INVALID,Reserved IP address for this MAC address(%m) is already set.
GW_DHCP_SERVER_RESERVED_MAC_UNIQUENESS_INVALID,为该MAC地址（%m）保留的 IP地址已经设置。
#From:LW7,PIN Settings
LW7,PIN 设置
#From:YM87,For most applications, the priority classifiers ensure the right priorities, and specific WISH Rules are not required.
YM87,对于大多数应用，优先级分级器确认正确的优先级，而不需要特定的 WISH规则。
#From:GW_NAT_WAN_PING_FILTER_INVALID,The WAN Ping filter name %s does not exist
GW_NAT_WAN_PING_FILTER_INVALID, WAN Ping过滤器名称%s 不存在。
#From:help835,If your PC's operating system is Windows XP Service Pack 2 (SP2) or later and you are using Windows Internet Explorer (IE) as your browser, you can use this option to save key parts of the router's current wireless security settings to your PC with Windows Connect Now (WCN) technology. The settings will then be available to propagate to other wireless devices.
help835,如果您计算机的操作系统是Windows XP Service Pack 2 (SP2) 或更高版本并且您正在使用Windows Internet Explorer (IE) 所谓您的浏览器，您就可以用该选项来通过Windows Connect Now (WCN)技术将路由器当前无线安全设置中的密码部分保存到您的PC中。该设置将能够用来传播到其他无线设备。
#From:at.lowpriority,(1..255)
at.lowpriority,(1..255)
#From:YM49,A name is required for rule number
YM49,对于规则号需要一个名称
#From:GW_INET_ACCESS_POLICY_TOO_MANY_IP_INVALID,You cannot add new IP address %v. You can only reuse IP addresses from other policies.
GW_INET_ACCESS_POLICY_TOO_MANY_IP_INVALID,您不能添加新IP地址%v。您只能用其他方法重新使用IP地址。
#From:YM112,Invalid L2TP server IP address
YM112,无效 L2TP 服务器IP地址
#From:KR90,H-Node, this indicates a Hybrid-State of operation. First WINS servers are tried, if any, followed by local network broadcast. This is generally the preferred mode if you have configured WINS servers.
KR90,H-Node表明一个混合的工作状态。首先，如果有的话则尝试WINS服务器，然后尝试本地网络广播。如果您配置了WINS服务器，这通常是更受欢迎的模式。
#From:help838,Note that WCN only saves a few of the wireless security settings. When you use WCN to propagate settings to other wireless devices, you may have to make additional settings manually on those devices.
help838,请注意，WCN只保存无线安全设置的一小部分。当您用WCN来向其他无线设备传播设置时，您可能需要在这些设备上手动进行额外的设置。
#From:at.ETS,Enable Traffic Shaping
at.ETS,启用流量调整
#From:KR73,If WAN Port Mode is set to "Bridge Mode", the following choices are displayed in place of the above choices, because the device is functioning as a bridge in a network that contains another router.
KR73,如果WAN端口模式设置为“桥接模式”，因为设备在包含了另一个路由器的 网络中以桥接模式工作，则以下选项会显示在上面选项的位置
#From:wwl.intro.s3.2,There are several levels of wireless security. The level you choose depends on the security features your wireless adapters support.
wwl.intro.s3.2,有几个无线安全级别。您所选择的级别要基于您的无线适配器所支持的无线特性。
#From:.r.alert5,Invalid Metric for route
.r.alert5,路由度量无效
#From:GW_NAT_WAN_PING_FILTER_WARNING,<warn>The WAN Ping filter name %s no longer exists, WAN PING will be disabled.</warn>
GW_NAT_WAN_PING_FILTER_WARNING,<warn>WAN Ping 过滤器名称 %s不存在， WAN PING 将被禁用。</warn>
#From:YM53,Invalid local end IP Address.
YM53,无效本地结束IP地址。
#From:help215,Note that WCN only sets a few of the wireless options. You will still need to go to the <a href="../Basic/Wireless.shtml">Wireless Settings</a> page to set other wireless options such as Super G Mode and transmission rate.
help215,请注意，WCN只设置一小部分无线选项。您仍然需要进入<a href="../Basic/Wireless.shtml">无线设置</a>页面来设置其他的无线选项，比如 Super G 模式＆传送速率。
#From:YM140,WISH is short for Wireless Intelligent Stream Handling, a technology developed to enhance your experience of using a wireless network by prioritizing the traffic of different applications.
YM140,WISH 是无线智能数据流处理的缩写，是通过对不同应用的流量进行优先级排序，增强您使用无限网络使用体验所开发的技术。
#From:GW_DHCPSERVER_REJECTED,The DHCP server address %v was rejected by the network device. If you have more than one DHCP server on your network this may cause IP address conflicts.
GW_DHCPSERVER_REJECTED,DHCP服务器地址%v 被网络设备拒绝。如果在您的网络上有一个以上的DHCP服务器，则可能引起IP地址冲突。
#From:YM142,Allows the router to recognize HTTP transfers for many common audio and video streams and prioritize them above other traffic. Such streams are frequently used by digital media players.
YM142,允许路由器能识别出针对许多音频和视频流的HTTP传送，并且在其他流量之前优先处理它们。数字媒体玩家经常使用这种数据流。
#From:GW_DYNDNS_PASSWORD_INVALID,password must be specified
GW_DYNDNS_PASSWORD_INVALID,必须指定密码。
#From:YM152,The rule applies to a flow of messages for which one computer's IP address falls within the range set here.
YM152,该规则应用于和某计算机IP地址相关的信息流中，该计算机IP地址存在于这里设置的范围中。
#From:LT119a,Invalid DHCP Server End IP Range
LT119a,无效DHCP服务器结束IP范围
#From:LW36,If you are having trouble accessing the Internet through the router, double check any settings you have entered on this page and verify them with your ISP if needed.
LW36,如果您在通过路由器访问Internet时遇到问题，则请仔细检查您在该页面中进行的任何设置并且在需要时向您的ISP求证。
#From:help377,The encryption algorithm used to secure the data communication. TKIP (Temporal Key Integrity Protocol) provides per-packet key generation and is based on WEP. AES (Advanced Encryption Standard) is a very secure block based encryption. With the "TKIP and AES" option, the router negotiates the cipher type with the client, and uses AES when available.
help377,加密算法用于保证数据通信的安全。TKIP（暂时密码集成协议）为每个数据包生成一个密码并且是基于WEP的。AES （高级加密标准）是一个基于加密的非常安全的系列。路由器与客户端针对“TKIP和AES”的加密类型进行协商，并优先使用AES。
#From:GW_NAT_PORT_TRIGGER_PORT_RANGE_INVALID,%s '%s' is invalid.
GW_NAT_PORT_TRIGGER_PORT_RANGE_INVALID,%s '%s'无效。
#From:YM121,Invalid WEP Keys
YM121,无效WEP密码
#From:YM29,Invalid Fragmentation Threshold
YM29,无效分段门限。
#From:YM159,The WISH Sessions page displays full details of active local wireless sessions through your router when WISH has been enabled. A WISH session is a conversation between a program or application on a wirelessly connected LAN-side computer and another computer, however connected.
YM159,WISH Sessions页面显示当WISH启用时通过您的路由器建立的活动本地无线会话的详细信息。WISH 会话是在一个无线连接的LAN端计算机和另一个计算机上的一个程序或应用之间的对话。
#From:YM120,Invalid Port Number.
YM120,无效端口号
#From:wwl.BETTER,BETTER
wwl.BETTER,更好
#From:LW55,Enable the Wi-Fi Protected Setup feature.
LW55,启用Wi-Fi 保护安装特性。
#From:YM106,Invalid PPTP subnet mask
YM106,无效 PPTP子网掩码
#From:.aa.bsecure.block.unrated,Block Unrated Sites
.aa.bsecure.block.unrated,阻止未分级的站点
#From:GW_WAN_BIGPOND_USERNAME_INVALID,A Big Pond user name MUST be specified
GW_WAN_BIGPOND_USERNAME_INVALID,必须指定一个 Big Pond 用户名
#From:KR76,For example, 192.168.0.101.
KR76,例如， 92.168.0.101。
#From:GW_DHCPSERVER_EXHAUSTED,The DHCP server can offer no more IP addresses because all available addresses are in use. Increase the number of available IP addresses on the DHCP server configuration.
GW_DHCPSERVER_EXHAUSTED,由于所有可用的地址都在使用中，所以DHCP服务器无法提供更多的IP地址。在DHCP服务器配置中增加可用IP地址的数目。
#From:GW_WAN_L2TP_SERVER_IP_ADDRESS_INVALID,Invalid L2TP server IP address: %v
GW_WAN_L2TP_SERVER_IP_ADDRESS_INVALID,无效L2TP服务器 IP 地址：%v
#From:wwl.alert.pv5.2,WEP password must be exactly 13 alphanumeric characters.
wwl.alert.pv5.2,WEP 密码必须是13个字母。
#From:GW_ROUTES_SUBNET_INVALID,Route subnet %v is invalid
GW_ROUTES_SUBNET_INVALID,路由子网 %v无效
#From:.aa.bsecure.drugs,Drugs
.aa.bsecure.drugs,药品
#From:LW1,IP address cannot be the same as LAN IP address of the router.
LW1,IP 地址不能与路由器的LAN IP地址相同。
#From:GW_DHCPSERVER_EXPIRED,A network computer never renewed its 'leasease' of %v and has lost its right to use that address. If the device continues to use that address it may cause IP address conflicts.
GW_DHCPSERVER_EXPIRED,网络中的一个计算机没有更新其对 %v 的“租用”并失去了使用该地址的权限。如果该设备继续使用该地址，可能引起IP地址冲突。
#From:GW_INET_ACL_IP_ADDRESS_IN_LAN_SUBNET_INVALID,IP address %v should be within LAN subnet (%v).
GW_INET_ACL_IP_ADDRESS_IN_LAN_SUBNET_INVALID,IP地址 %v 应该在LAN子网内 （%v）。
#From:bd.NETBIOS_REG_TYPE_B,Broadcast only (use when no WINS servers configured)
bd.NETBIOS_REG_TYPE_B,只能使用广播（当没有配置WINS服务器时使用）
#From:.aa.bsecure.financial,Financial
.aa.bsecure.financial,财政的
#From:YM135,The NAT forwards incoming connection requests to a LAN-side host only when they come from the same IP address with which a connection was established. This allows the remote application to send data back through a port different from the one used when the outgoing session was created.
YM135,只有当连接请求来自于一个已建立的连接的相同IP地址时，则NAT将进入的连接请求转发给一个LAN端的主机。这将允许远程应用通过一个与外发会话建立时所使用的不同的端口来返回数据。
#From:LT119,Invalid DHCP Server Start IP Range
LT119,无效DHCP 服务器起始IP范围
#From:.vs.public,Public
.vs.public,公共的
#From:KR93,B-Node, this indicates to use local network broadcast ONLY. This setting is useful where there are no WINS servers available, however, it is preferred you try M-Node operation first.
KR93,B-Node，这表示只使用本地网络广播。该设置用于在没有可用WINS服务器时，但是，建议您首先尝试 M-Node 操作。
#From:GW_SECURE_REMOTE_ADMINSTRATION,Gateway remote administration enabled on port: %u
GW_SECURE_REMOTE_ADMINSTRATION,在端口上启用了网关远程管理：%u
#From:.aa.bsecure.employment,Employment
.aa.bsecure.employment,采用
#From:YM160,The IP address and, where appropriate, port number of the computer that originated a network connection.
YM160,创建一个网络连接时的计算机IP 地址和适当的端口号。
#From:LS423,Assigned IP
LS423,分配的IP
#From:GW_WAN_L2TP_GATEWAY_IN_SUBNET_INVALID,L2TP Gateway IP address %v must be within the WAN subnet.
GW_WAN_L2TP_GATEWAY_IN_SUBNET_INVALID,L2TP网关IP 地址 %v必须在WAN 子网内。
#From:GW_WISH_RULES_HOST1_IP,'%s': Host 1 IP start, %v, must be less than host 1 IP end, %v
GW_WISH_RULES_HOST1_IP,%s'：主机1 起始IP，%v，必须小于主机1结束IP， %v
#From:.vs.private,Private
.vs.private,隐私
#From:KR86,This setting has no effect if the 'Learn NetBIOS information from WAN' is activated.
KR86,如果“从WAN学习NetBIOS信息”已激活，则该设置无效。
#From:bd.NETBIOS_SEC_WINS,Secondary WINS IP Address
bd.NETBIOS_SEC_WINS,备选WINS IP地址
#From:GW_INET_ACL_START_IP_ADDRESS_INVALID,Start IP address must be less than end IP address: %v-%v.
GW_INET_ACL_START_IP_ADDRESS_INVALID,起始IP地址必须小于结束IP地址：%v-%v.
#From:auth,Authentication
auth,认证
#From:KR24,Can not stop the process
KR24,无法停止进程
#From:KR17,5GHz
KR17,5GHz
#From:YM84,Host 2 IP Range
YM84,主机2 IP 范围
#From:help88,A QoS Engine Rule identifies a specific message flow and assigns a priority to that flow.
help88, QoS 引擎规则区别一个特定的信息并为该信息流分配一个优先级。
#From:LW50,Enabling this option (the default setting) enables single VPN connections to a remote host. (But, for multiple VPN connections, the appropriate VPN ALG must be used.) Disabling this option, however, only disables VPN if the appropriate VPN ALG is also disabled.
LW50,启用该选项（缺省设置）则启用了到一个远程主机的单个VPN连接。（但是，归于多个VPN连接，则必须使用VPN ALG。）如果适合的VPN ALG也被禁用，则禁用该选项只能禁用VPN。
#From:YM103,Invalid PPPoE IP address
YM103,无效 PPPoE IP 地址
#From:KR64,In bridge mode, the device still supports several features not available in ordinary bridges -- features that involve the WAN side of the upstream router.
KR64,在桥接模式中，该设备仍然支持一般网桥不具备的几个特性-- 涉及到上游路由器的WAN端的特性。
#From:help361,Performance enhancing features such as Packet Bursting, FastFrames, and Compression.
help361,性能增强特性，比如数据包突发，快速帧和压缩。
#From:LW4,Wi-Fi Protected Setup
LW4,Wi-Fi 保护安装
#From:KR38,PIN
KR38,PIN
#From:GW_WLAN_11A_STATIC_TURBO_INVALID,For 11a Static Turbo mode, channel should be set to one of 42,50,58,152, or 160.
GW_WLAN_11A_STATIC_TURBO_INVALID,对于11a 静态 Turbo 模式，信道应该设置为42，50，58，152＆160中的一个。
#From:help358,Super G™ Mode
help358,Super G™模式
#From:YM6,You do not have permissions to perform the specified action.
YM6,您没有权限执行指定的操作。
#From:.aa.bsecure.categ.select,Categories Selection
.aa.bsecure.categ.select,类别选择
#From:YM58,Priority must be a number between 1 and 255 inclusive.
YM58,优先级必须时1到255之间的一个数字。
#From:.aa.bsecure.age.youth,Youth (13-17)
.aa.bsecure.age.youth,青年（13-17）
#From:LW17,Click <strong>Add Wireless Device Wizard</strong> to use Wi-Fi Protected Setup to add wireless devices to the wireless network.
LW17,单击<strong>添加无线设备向导</strong>来使用 Wi-Fi 保护安装，一边把无线设备添加到无线网络中。
#From:YM18,Invalid Destination IP End address for Port Filter
YM18,无效端口过滤的目的IP结束地址。
#From:LT210,WPA2-PSK/AES (also known as WPA2 Personal)
LT210,WPA2-PSK/AES （也叫个人WPA2 ）
#From:GW_WAN_IDLE_TIME_INVALID,Invalid Idle Time (the permitted range is %u to %u)
GW_WAN_IDLE_TIME_INVALID,无效空闲时间（允许的范围是%u 到 %u)
#From:YM186,Multicast Group Address
YM186,多播组地址
#From:.aa.bsecure.sports,Sports
.aa.bsecure.sports,运动
#From:GW_QOS_RULES_NAME_ALREADY_USED,Name '%s' is already used.
GW_QOS_RULES_NAME_ALREADY_USED,名称 '%s'已经被使用。
#From:bwz.intro.WCNWz,The following wizard uses Microsoft's Windows Connect Now technology to automatically configure the wireless settings on your Router. Make sure that you have sucessfully run Microsoft's Network Wireless Configuarion Wizard on your computer before using this feature.
bwz.intro.WCNWz,以下向导使用Microsoft 的 Windows Connect Now技术在您的路由器上自动配置无线设置。请确认您在使用该特性前成功启动了Microsoft 的网络无线配置向导。
#From:GW_DHCP_SERVER_POOL_TO_IN_SUBNET_INVALID,DHCP server pool TO %v is not in LAN subnet %v.
GW_DHCP_SERVER_POOL_TO_IN_SUBNET_INVALID,DHCP 服务器地址池TO %v 不在LAN子网内%v.
#From:GW_NAT_H323_ALG_ACTIVATED_WARNING,<warn>The H.323 has been automatically enabled because a virtual server entry you created requires it.</warn>
GW_NAT_H323_ALG_ACTIVATED_WARNING,<warn>由于您建立的一个虚拟服务器的需要，H.323已自动启用。</warn>
#From:KR4,L2 Isolation
KR4,L2 隔离
#From:LT120y,Invalid Primary WINS IP
LT120y,无效首选WINS IP
#From:KR103,The Wi-Fi Protected Setup Network Settings have been saved successfully.
KR103,Wi-Fi 保护安装的网络配置已成功保存。
#From:YM44,Calista IP phone
YM44,Calista IP电话
#From:LW47,If you consider yourself an advanced user and have configured a wireless router before, click <strong>Manual Wireless Network Setup</strong> to input all the settings manually.
LW47,如果您觉得您是高级用户并且以前配置过无线路由器，则单击<strong>手动无线网络设置</strong> 来手动输入设置。
#From:GW_XML_CONFIG_GET_FAILED,Failed to export configuration file #%u
GW_XML_CONFIG_GET_FAILED,无法导出配置文件#%u
#From:WIFISC_AP_SET_APSETTINGS_COMPLETE,SetAPSettings by (%s) complete
WIFISC_AP_SET_APSETTINGS_COMPLETE,通过（%s）配置AP完成
#From:wwl.WKL,Wep Key Length
wwl.WKL,Wep 密码长度
#From:YM168,Communication with the router failed
YM168,与路由器通信失败
#From:GW_NAT_NAME_USED_INVALID,Name '%s' is already used.
GW_NAT_NAME_USED_INVALID,名称 '%s' 已经被使用。
#From:GW_DYNDNS_SERVER_INDEX_VALUE_INVALID,invalid server index value: %d
GW_DYNDNS_SERVER_INDEX_VALUE_INVALID,无效服务器索引值：%d
#From:WARN,[WARN]
WARN,[警告]
#From:LW23,Enterprise
LW23,企业
#From:ADVANCED_NETWORK,Advanced Network
ADVANCED_NETWORK,高级网络
#From:GW_WAN_PPTP_PASSWORD_INVALID,A PPTP password MUST be specified
GW_WAN_PPTP_PASSWORD_INVALID,必须指定一个PPTP密码。
#From:LW59,Restore the default PIN of the router.
LW59,恢复路由器的缺省PIN码。
#From:YM126,If you have enabled Wireless Security, make sure you write down the Key or Passphrase that you have configured. You will need to enter this information on any wireless device that you connect to your wireless network.
YM126,如果您已经启用了无线安全，请确认您已经记下了您配置的密码或口令。您将需要在您无线网络中连接的设备上输入该信息。
#From:LW66,Enabled/Configured
LW66,已启用/已配置
#From:.r.alert4,Invalid Interface for route
.r.alert4,无效路由接口
#From:LY10,Add Wireless Station
LY10,添加无线工作站
#From:GW_DHCP_SERVER_POOL_FROM_INVALID,The DHCP server start address %v is not valid in the LAN subnet %v.
GW_DHCP_SERVER_POOL_FROM_INVALID,DHCP服务器起始地址%v 没有在LAN的有效子网中%v。
#From:WIFISC_AP_SETUP_LOCKED,Lock AP setup
WIFISC_AP_SETUP_LOCKED,锁定AP 设置
#From:YM91,Do you want to abandon changes you made to the current entry?
YM91,您想要放弃您对当前条目的修改码？
#From:WIFISC_AP_SET_SELECTED_REGISTRAR_FAIL,Set Selected Registrar failed, reason (%s), err_code (%u)
WIFISC_AP_SET_SELECTED_REGISTRAR_FAIL,设置选定的注册机失败，原因（%s），err_code（%u）
#From:LS3,Nothing has changed, save anyway?
LS3,没有任何修改，仍然保存吗？
#From:GW_NAT_UNKNOWN,Unknown
GW_NAT_UNKNOWN,未知
#From:GW_WLAN_11A_DYNAMIC_TURBO_INVALID,For 11a Dynamic Turbo mode, channel should be set to one of 40,48,56,153, or 161.
GW_WLAN_11A_DYNAMIC_TURBO_INVALID,对于11a 动态 Turbo 模式，信道应该设置为40，48，56，153或161中的一个。
#From:YM163,Note that, even when NTP Server is enabled, you must still choose a time zone and set the daylight saving parameters.
YM163,请注意，即使当启用了NTP服务器的时候，您也必须选择一个时区并设置夏令时参数。
#From:YM181,To use this feature, you must first have a Dynamic DNS account from one of the providers in the drop down menu.
YM181,要使用该特性，您必须首先从下拉菜单中的一个供应商处得到一个动态DNS帐户。
#From:.cantapplysettings.1,Insufficient Permission
.cantapplysettings.1,权限不足
#From:YM11,Warnings:
YM11,警告：
#From:wwl.wsp.chars.2,(8 to 63 characters)
wwl.wsp.chars.2,（8 到 63个字符）
#From:bd.NETBIOS_PRI_WINS,Primary WINS IP Address
bd.NETBIOS_PRI_WINS,首选 WINS IP地址
#From:wwl.DWKL,Default WEP Key to Use
wwl.DWKL,缺省使用的 WEP 密码
#From:KR44,Wireless Device PIN
KR44,无线设备 PIN码
#From:.aa.bsecure.obscene,Obscene
.aa.bsecure.obscene,淫秽的
#From:YM130,Invalid Server IP Address
YM130,无效服务器IP地址
#From:KR99,Select Dynamic DNS Server
KR99,选择动态 DNS 服务器
#From:GW_DHCP_SERVER_PRIMARY_AND_SECONDARY_WINS_IP_INVALID,Primary WINS IP address must be specified if secondary is also specified.
GW_DHCP_SERVER_PRIMARY_AND_SECONDARY_WINS_IP_INVALID,如果指定了备选WINS IP地址，则必须指定首选 WINS IP 地址。
#From:GW_FIREWALL_NO_IP_RANGE_INVALID,Enable at least one Source IP Range for '%s'
GW_FIREWALL_NO_IP_RANGE_INVALID,至少为'%s'启用一个源IP范围。
#From:GW_NAT_VS_PROTOCOL_INVALID,Virtual server '%s' protocol number, %d, must be 0 or between 3 and 255.
GW_NAT_VS_PROTOCOL_INVALID,虚拟服务器 '%s' 协议号，%d，必须为0或在3到255之间。
#From:KR52,Select this option if you want to setup your network manually
KR52,如果您想要手动设置您的网络，则选择该选项。
#From:KR33,Welcome to the Add Wireless Device Wizard
KR33,欢迎使用添加无线设备向导
#From:ZM23,You must be logged in as 'admin' to perform this action.
ZM23,您必须以“admin”登录以执行该操作。
#From:LW40,This wizard is designed to assist you in connecting your wireless device to your router. It will guide you through step-by-step instructions on how to get your wireless device connected. Click the button below to begin.
LW40,设计该向导是为了帮助您将您的无线设备连接到您的路由器。它将通过一步步的指示指引您连接您的无线设备。单击以下按钮开始。
#From:LY4,Lock Wireless Security Settings
LY4,锁定无线安全设置
#From:LW34,If you consider yourself an advanced user and have configured a router before, click <strong>Manual Internet Connection Setup</strong> to input all the settings manually.
LW34,如果您认为您自己是高级用户并且之前曾配置过路由器，请单击<strong>手动Internet连接设置</strong> 来手动输入所有设置。
#From:YM25,Are you sure you want to delete
YM25,您确定要删除吗
#From:YM15,Invalid Destination IP Start address for Port Filter
YM15,端口过滤的无效目的起始IP地址
#From:bwl.SGM,Super&nbsp;G&trade;&nbsp;Mode
bwl.SGM,Super G&trade; 模式
#From:GW_WLAN_80211X_RADIUS_INVALID,Radius server address is not valid.
GW_WLAN_80211X_RADIUS_INVALID,Radius 服务器地址无效。
#From:GW_WISH_RULES_PROTOCOL,'%s': Protocol, %u, needs to be between 0 and 257
GW_WISH_RULES_PROTOCOL,%s'：协议，%u，需要在0到257之间
#From:LS316,Login
LS316,登录
#From:ZM15,User has logged out
ZM15,用户已退出
#From:GW_DHCP_SERVER_RESERVATION_DISABLED_IN_CONFLICT_WARNING,<warn>A DHCP Reservation has been disabled because it conflicts with the routers own LAN IP.</warn>
GW_DHCP_SERVER_RESERVATION_DISABLED_IN_CONFLICT_WARNING,<warn>由于和路由器自身的LAN IP冲突，DHCP 保留已被禁用。</warn>
#From:GW_DYNDNS_HOST_NAME_INVALID,host must be specified
GW_DYNDNS_HOST_NAME_INVALID,必须指定主机
#From:LW42,Manual Wireless Network Setup
LW42,手动无线网络设置
#From:GW_WAN_PPTP_GATEWAY_IP_ADDRESS_INVALID,Invalid PPTP gateway IP address: %v
GW_WAN_PPTP_GATEWAY_IP_ADDRESS_INVALID,无效PPTP网关IP 地址：%v
#From:rs.intro.4,The restored configuration file has been uploaded successfully.
rs.intro.4,要恢复的配置文件上传成功。
#From:GW_QOS_RULES_REMOTE_IP_END_SUBNET,'%s': Remote IP end '%v' is in the LAN subnet
GW_QOS_RULES_REMOTE_IP_END_SUBNET,%s'：远程结束IP'%v'不在LAN子网内
#From:.NA,N/A
.NA,N/A
#From:hhav.r_gateway,The gateway IP address is the IP address of the router, if any, used to reach the specified destination.
hhav.r_gateway,在有网关的情况下，网关IP地址是路由器的IP地址用于到达指定的目的地。
#From:INFO,[INFO]
INFO,[INFO]
#From:help112,Metric:
help112,度量：
#From:tf.msg.FWUgReset,Some firmware upgrades reset the configuration options to the factory defaults. Before performing an upgrade, be sure to save the current configuration from the <a href="../Tools/System.shtml" onclick="return jump_if();"> Tools &rarr; System</a> screen.
tf.msg.FWUgReset,某些固件升级把配置选项恢复到工厂缺省值。在执行升级前，请确认在 <a href="../Tools/System.shtml" onclick="return jump_if();"> 工具 &rarr; 系统</a> 窗口中保存了配置。
#From:bd.NETBIOS_WAN,Learn NetBIOS information from WAN
bd.NETBIOS_WAN,从WAN学习NetBIOS信息
#From:aw.igslot,Force Short Slot for 11N Clients
aw.igslot,对11N 客户端强制实行端碰撞槽时间
#From:ZM2,(default if not matched by anything else)
ZM2,（如果与其他的都不响符合则使用缺省设置）
#From:LT7,You do not have permission to perform the specified action.
LT7,您没有权限执行指定的操作。
#From:WIFISC_AP_SET_SELECTED_REGISTRAR,Set Selected Registrar
WIFISC_AP_SET_SELECTED_REGISTRAR,设置所选的注册机
#From:help214,When the necessary preparations are complete, the WCN technology will propagate the wireless network settings from your PC to the router. Then you will have to reboot the router for the settings to take effect.
help214,当完成必要的准备后，WCN技术将把无线网络设置从您的计算机传播到路由器。然后您要重新启动路由器以使设置生效。
#From:at.Both,Both
at.Both,都
#From:ZM22,Day of Week
ZM22,一周中的一天
#From:help.ts.rfd,Restore To Factory Default Settings
help.ts.rfd,恢复到工厂缺省设置
#From:LW44,If you would like to configure the wireless settings of your new D-Link Systems Router manually, then click on the Manual Wireless Network Setup button below.
LW44,如果您要手动配置您的新D-Link系统路由器的无线设置，则请单击下面的手动无线网络设置。
#From:help209,If your PC's operating system is Windows XP Service Pack 2 (SP2) or later and you are using Windows Internet Explorer (IE) as your browser, you can use Windows Connect Now (WCN) technology to help configure the router's wireless security settings.
help209,如果您的操作系统是Windows XP Service Pack 2 （SP2）或更高版本并且您正在使用Windows Internet Explorer （IE）或更高版本作为您的浏览器，您久能使用Windows Connect Now （WCN）技术来协助配置路由器的无线安全设置。
#From:YM70,destination starting port should be between 0 and 65535 inclusive.
YM70,目的起始端口应该在0到65535之间。
#From:GW_UPNP_IGD_PORTMAP_VS_CHANGE,UPnP changed VS entry %v <-> %v:%d <-> %v:%d %s to %s
GW_UPNP_IGD_PORTMAP_VS_CHANGE,UPnP 改变 VS 条目 %v <-> %v:%d <-> %v:%d %s to %s
#From:help143s,The Web Filter section is one of two means by which you can specify the web sites you want to allow. You also have the alternative of using the Sentinel Parental Controls Service, which allows you to specify broad categories of web sites and saves you the trouble of entering specific web site URLs. For more information about the Sentinel service, refer to <a href="../Tools/Sentinel.shtml">Tools &rarr; Sentinel</a>.
help143s,Web 过滤部分是您可以指定被允许访问的web站点的两种方法之一。您也可以使用家长监督服务，让您可以指定许多类别的web站点并省去您输入特定web站点URL的麻烦。关于监督服务的更多信息，请参见<a href="../Tools/Sentinel.shtml">工具 &rarr; 监督</a>。
#From:help363,This mode is not backwards compatible with non-Turbo (legacy) devices. This mode should only be enabled when all devices on the wireless network are Static Turbo enabled.
help363,该模式不向下兼容不支持Turbo 的（旧的）设备。 该模式只能在无线网络上的所有设备都启用了静态Turbo时才能启用。
#From:.aa.bsecure.web_newsgroup,Web Newsgroup
.aa.bsecure.web_newsgroup,Web 新闻组
#From:YM128,Invalid Primary DNS Address
YM128,无效首选DNS地址
#From:GW_NAT_PORT_TRIGGER_PORT_RANGE_EMPTY_INVALID,%s of '%s' can not be empty.
GW_NAT_PORT_TRIGGER_PORT_RANGE_EMPTY_INVALID,%s of '%s' 不能为空。
#From:KR72,StreamEngine&trade; technology is applied to media streams that are passed between the WAN side of the upstream router and clients of the bridge.
KR72,StreamEngine&trade; 技术应用于在上游路由器的WAN端与网桥的客户端之间经过的媒体流。
#From:YM177,passwords do not match, please re-enter
YM177,密码不正确，请重新输入
#From:YM82,Host 1 IP Range
YM82,主机1 IP 范围
#From:YM119,Invalid Authentication Timeout.
YM119,认证超时无效。
#From:KR70,The bridge still has the ability to analyze traffic on the WAN side of the upstream router so as to determine the speed of its WAN connection.
KR70,网桥仍然能够分析上游路由器的WAN端流量以便确定其WAN连接的速率。
#From:YM161,The IP address and, where appropriate, port number of the computer to which a network connection has been made.
YM161,所建立网络连接的计算机的 IP 地址和适当的端口号。
#From:GW_DHCP_SERVER_POOL_SIZE_INVALID,DHCP server pool size is too big (must be no more than 256 addresses).
GW_DHCP_SERVER_POOL_SIZE_INVALID,DHCP服务器地址池尺寸太大（不能大于256个地址）。
#From:.sdi.s4b,Established
.sdi.s4b,已建立
#From:ZM8,DNS Lookup Authentication Server
ZM8,DNS 查找认证服务器
#From:YM129,Invalid Secondary DNS Address
YM129,无效备选DNS地址
#From:help370,64-bit ASCII keys are up to 5 characters in length (DMODE is a valid string of 5 characters for 64-bit encryption.)
help370,64位ASCII 密码最长5个字符（DMODE是64位加密的有效5个字符的字符串）。
#From:LY29,Locking the wireless security settings prevents the settings from being changed by any new external registrar using its PIN. Devices can still be added to the wireless network using Wi-Fi Protected Setup. It is still possible to change wireless network settings with <a href="../Basic/Wireless.shtml" shape="rect">Manual Wireless Network Setup</a>, <a href="../Basic/Wizard_WLAN.shtml" shape="rect">Wireless Network Setup Wizard</a>, or an existing external WLAN Manager Registrar.
LY29,锁定无线安全设置以防止任何新的注册机用PIN码修改设置。仍然可以用Wi-Fi保护安装将设备添加到无线网络。也可以通过<a href="../Basic/Wireless.shtml" shape="rect">手动无线网络设置</a>，<a href="../Basic/Wizard_WLAN.shtml" shape="rect">无限网络设置向导</a>，或一个已有的外部WLAN管理注册机来修改无线网络设置。
#From:GW_XML_CONFIG_WRITE_WARN,Warning while writing configuration file: %s
GW_XML_CONFIG_WRITE_WARN,在写入配置文件时警告：%s
#From:GW_FIREWALL_NAME_INVALID,Name '%s' is already used
GW_FIREWALL_NAME_INVALID,名称 '%s' 已被使用
#From:GW_WISH_RULES_HOST2_IP,'%s': Host 2 IP start, %v, must be less than host 2 IP end, %v
GW_WISH_RULES_HOST2_IP,%s'：主机 2 起始IP ，%v，必须小于主机2 结束IP，%v
#From:TA2,Product Page
TA2,产品页面
#From:LS314,Connect
LS314,连接
#From:.vs.traffictype,Traffic Type
.vs.traffictype,流量类型
#From:GW_DYNDNS_TIMEOUT_TOO_BIG_INVALID,The timeout value cannot be greater than 8760.
GW_DYNDNS_TIMEOUT_TOO_BIG_INVALID,超时值不能大于 8760。
#From:KR43,Please enter the PIN of your wireless device, then click on the Connect button below.
KR43,请输入您的无线设备的PIN码，然后单击下面的连接按钮。
#From:KR51,Select this option if your wireless device supports Wi-Fi Protected Setup
KR51,如果您的设备支持Wi-Fi保护安装，则选择该选项。
#From:GW_WAN_PPTP_GATEWAY_IN_SUBNET_INVALID,PPTP Gateway IP address %v must be within the WAN subnet.
GW_WAN_PPTP_GATEWAY_IN_SUBNET_INVALID,PPTP网关IP地址%v 必须在WAN子网内。
#From:help837,Click the <span class="button_ref">Save to Windows Connect Now</span> button, and the WCN technology will capture the wireless network settings from your router and save them on your PC.
help837,单击<span class="button_ref">保存到Windows Connect Now</span>按钮，WCN 技术将从您的路由器获取无限网络设置并保存在您的计算机上。
#From:KR49,Please Select Configuration Method to set up your Wireless Network
KR49,请选择您设置无线网络的配置模式。
#From:.open,Open
.open,打开
#From:.aa.bsecure.news,News
.aa.bsecure.news,新闻
#From:YM34,Update
YM34,升级
#From:.advwls,Advanced Wireless
.advwls,高级无线
#From:GW_DHCP_SERVER_RESERVATION_DISABLED_OUT_OF_POOL_WARNING,<warn>DHCP Reservation %v has been disabled because the DHCP pool is too small.</warn>
GW_DHCP_SERVER_RESERVATION_DISABLED_OUT_OF_POOL_WARNING,<warn>DHCP 保留 %v 已禁用， 因为DHCP地址池太小。</warn>
#From:GW_MAC_FILTER_ALL_LOCKED_OUT_INVALID,MAC Filter settings will lockout all machines. This is not allowed.
GW_MAC_FILTER_ALL_LOCKED_OUT_INVALID,MAC 过滤设置将阻止所有的机器。这时不允许的。
#From:.wepkey4,WEP Key 4
.wepkey4,WEP 密码 4
#From:YM98,optional
YM98,可选的
#From:.aa.bsecure.search_engine,Search Engine
.aa.bsecure.search_engine,搜索引擎
#From:KR47,WPA Only"
KR47,只使用WPA"
#From:bws.msg.WEP.3,If you choose the WEP security option this device will <strong>ONLY</strong> operate in <strong>Legacy Wireless mode (802.11B/G)</strong>. This means you will <strong>NOT</strong> get 11N performance due to the fact that WEP is not supported by Draft 11N specification.
bws.msg.WEP.3,如果您选择WEP安全选项，该设备将<strong>只</strong>工作在<strong>旧的无线模式（802.11B/G）下</strong>。这意味着由于11N规格草案不支持WEP，您将<strong>不能</strong>获得11N带来的性能。
#From:GW_SMTP_LAN_ADDRESS_CONFLICT_WARNING,<warn>Email server address conflicts with router LAN address - email will be disabled.</warn>
GW_SMTP_LAN_ADDRESS_CONFLICT_WARNING,<warn>Email 服务器地址和路由器LAN地址冲突- email 将被禁用</warn>
#From:GW_LAN_IP_MODE_INVALID,LAN IP mode is invalid
GW_LAN_IP_MODE_INVALID,LAN IP 模式无效
#From:GW_WAN_BIGPOND_SERVER_NOTSTD15,The specified Big Pond server is not a proper domain name or IP address.
GW_WAN_BIGPOND_SERVER_NOTSTD15,指定的Big Pond 服务器不是一个正确的域名或IP地址。
#From:ZM18,Once your router is configured the way you want it, you can save the configuration settings to a configuration file.
ZM18,只要按照您的方法配置了路由器，您就可以把配置保存到配置文件。
#From:GW_WLAN_FRAGMENT_THRESHOLD_INVALID,Fragmentation threshold should be between 256 and 2346.
GW_WLAN_FRAGMENT_THRESHOLD_INVALID,分段门限应该在256到2346之间。
#From:GW_LAN_DOMAIN_NAME_INVALID,Domain name given is invalid
GW_LAN_DOMAIN_NAME_INVALID,给定的域名无效
#From:.wifisc.overlap,Session Overlap Detected
.wifisc.overlap,检测到会话重合
#From:LW62,The wizard will either display the wireless network settings to guide you through manual configuration, prompt you to enter the PIN for the device, or ask you to press the configuration button on the device. If the device supports Wi-Fi Protected Setup and has a configuration button, you can add it to the network by pressing the configuration button on the device and then the on the router within 60 seconds. The status LED on the router will flash three times if the device has been successfully added to the network.
LW62,该向导将显示无线网络设置以指引您手动配置，提示您输入设备的PIN码，或要求您按下设备的配置按钮。如果设备支持Wi-Fi 保护安装并有一个配置按钮，您就可以通过按下设备上的配置按钮，然后在60秒内按下路由器上的配置按钮，将设备添加到网络。如果设备已成功添加到网络中，路由器上的状态LED将闪动三次。
#From:KR23,Process stopped. You may click on the Cancel button below to return to the beginning of the wizard page and restart the process
KR23,进程已停止。您可以单击下面的取消按钮来回到向导开始页面并重新开始该进程。
#From:.aa.bsecure.pornography,Pornography
.aa.bsecure.pornography,色情
#From:GW_NAT_NAME_INVALID,Name can not be empty string.
GW_NAT_NAME_INVALID,名称不能为空。
#From:bwl.NSS,Number of Spatial Streams
bwl.NSS,空间串流的数目
#From:YM108,Invalid PPTP server IP address
YM108,无效PPTP服务器IP 地址
#From:YM19,Destination IP End address should not be in LAN subnet
YM19,目的结束IP地址不应该在LAN子网中。
#From:WIFISC_AP_PROXY_PROCESS_COMPLETE,STA with MAC (%m) registered in
WIFISC_AP_PROXY_PROCESS_COMPLETE,带有已注册MAC（%m）的STA 
#From:GW_NAT_ENTRY_DUPLICATED_INVALID,Record '%s' is duplicate of '%s'.
GW_NAT_ENTRY_DUPLICATED_INVALID,记录 '%s' 是 '%s'的副本。
#From:GW_NAT_PORT_FORWARD_CONFLICT_INVALID,'%s' [%s:%s] conflicts with '%s'[%s:%s] on different IP Addresses.
GW_NAT_PORT_FORWARD_CONFLICT_INVALID,%s' [%s:%s] 和 '%s'[%s:%s] 由于不同的IP地址而产生冲突。
#From:LW27,If you would like to utilize our easy to use Web-based Wizards to assist you in connecting your new D-Link Systems Router to the Internet, click on the button below.
LW27,如果你想要借助我们便捷的基于Web的向导来帮助您把您的新D-Link系统路由器连接到Internet，请单击下面的按钮。
#From:YM38,Are you sure you want to update
YM38,您确定要升级吗
#From:YM185,NTP Server is not configured.
YM185,NTP服务器未配置
#From:LY2,Wi-Fi Protected Setup
LY2,Wi-Fi保护安装
#From:KR30,PIN(2nd half) Mismatch Detected
KR30,检测到PIN（第二部分)不匹配
#From:KR31,Session Over
KR31,会话结束
#From:.init_fail,Init failed
.init_fail,初始化失败
#From:YM68,source starting port should be between 0 and 65535 inclusive.
YM68,源起始端口应在0到65535之间
#From:sd.macaddr,MAC Address
sd.macaddr,MAC地址
#From:KR12,WAN Port Mode
KR12,WAN端口模式
#From:help366,A method of encrypting data for wireless communication intended to provide the same level of privacy as a wired network. WEP is not as secure as WPA encryption. To gain access to a WEP network, you must know the key. The key is a string of characters that you create. When using WEP, you must determine the level of encryption. The type of encryption determines the key length. 128-bit encryption requires a longer key than 64-bit encryption. Keys are defined by entering in a string in HEX (hexadecimal - using characters 0-9, A-F) or ASCII (American Standard Code for Information Interchange - alphanumeric characters) format. ASCII format is provided so you can enter a string that is easier to remember. The ASCII string is converted to HEX for use over the network. Four keys can be defined so that you can change keys easily. A default key is selected for use on the network.
help366,对无限通讯加密是为了能提供一个与有线网络一样安全的环境。WEP加密的安全性没有WPA加密的安全性高。要访问WEP加密的网络，您必须知道密钥。密钥是由您创建的一个字符串。在使用WEP时，您必须确定加密级别。加密等级决定了密钥的长度。128位加密要求的密钥长度要大于64位加密。密钥由十六进制（使用0到9和A到F）字符串或ASCII（美国信息交换标准码---字母格式）字符串来定义。ASCII格式让您可以输入一个便于您记忆的字符串。ASCII字符串在因特网上会转变为十六进来使用。由于可以设置4个密钥，因此您可以非常容易的更改密钥。因特网会选择一个缺省的密钥来使用。
#From:WIFISC_AP_REGISTRATION_COMPLETE,AP registered to Registrar (%s) through %s
WIFISC_AP_REGISTRATION_COMPLETE,AP注册到寄存器 （%s) 通过%s
#From:aw.TPC,TPC Max Gain
aw.TPC,TPC 最大增益
#From:aw.WDSMAC,WDS AP MAC Address
aw.WDSMAC,WDS AP MAC 地址
#From:YM62,Remote end port should be between 0 and 65535 inclusive.
YM62,远端结束端口应在0到65535之间
#From:aw.erpe.h,Extra protection for neighboring 11b wireless networks. Turn this option off to reduce the adverse effect of legacy wireless networks on 802.11ng performance.
aw.erpe.h,相邻11b无线网络的额外保护。关掉这个选项可降低旧的无线网络对802.11ng的负面影响。
#From:GW_WAN_RECONNECT_MODE_INVALID,Invalid reconnect mode
GW_WAN_RECONNECT_MODE_INVALID,无效的重连接模式
#From:WIFISC_AP_DEL_APSETTINGS_COMPLETE,DelAPSettings by (%s) complete
WIFISC_AP_DEL_APSETTINGS_COMPLETE,使用（%s)删除AP设定完成
#From:ss.intro.user,Only Administrator can clear the statistics. The Clear Statistics button is disabled as you are not currently logged in as Administrator.
ss.intro.user,仅管理员可清除这些数据。在您没有以管理员身份登录时，清除数据按钮是禁用的。
#From:LW33,If you are new to networking and have never configured a router before, click on <strong>Internet Connection Setup Wizard</strong> and the router will guide you through a few simple steps to get your network up and running.
LW33,如果您是第一次连接到网络并且之前没有设置过路由器，点击<strong>因特网连接建立向导</strong>路由器将通过几个简单的步骤来指导您建立并运行您的网络。
#From:KR27,Succeeded. To add another device click on the Cancel button below or click on the Wireless Status button to check wireless status.
KR27,成功。要添加另一个设备请点击下面的放弃按钮或点击无线网络状态按钮来检查无线网络状态。
#From:YM138,Controls endpoint filtering for packets of the UDP protocol.
YM138,控制终端过滤UDP协议的数据包。
#From:GW_NAT_VS_PORT_CONFLICT_INVALID,'%s' [%s:%d]->%v/%d conflicts with '%s' [%s:%d]->%v:%d.
GW_NAT_VS_PORT_CONFLICT_INVALID,%s' [%s:%d]->%v/%d 与 '%s' [%s:%d]->%v:%d相冲突
#From:bd.NETBIOS_WINS.1,Primary WINS Server IP address
bd.NETBIOS_WINS.1,主 WINS服务器IP地址。
#From:.aa.wiz.s6.title,Step 5: Sentinel Categories
.aa.wiz.s6.title,第5步：标记类型
#From:YM77,WISH Rules
YM77,WISH 规则
#From:YM48,QoS Engine
YM48,QoS 引擎
#From:YM89,Invalid Reservation IP Address
YM89,无效预留IP地址
#From:GW_WLAN_WPA_PSK_HEX_STRING_INVALID,Pre-Shared Key should be all HEX chars if length is 64.
GW_WLAN_WPA_PSK_HEX_STRING_INVALID,如果之前共享的密钥长度为64位的话，则应全部由十六进制字符组成。
#From:GW_WAN_WAN_IP_ADDRESS_INVALID,Invalid WAN IP address: %v
GW_WAN_WAN_IP_ADDRESS_INVALID,无效的WAN IP地址：%v
#From:LS4,Do you want to abandon all changes you made to this page?
LS4,您想放弃您对此页面所作的全部更改吗？
#From:KR98,The specified Dynamic DNS Service Provider is not supported.
KR98,不支持指定的动态DNS服务提供商
#From:YM148,Background (least urgent).
YM148,背景 （报警最少)。
#From:bws.WPAM.2,Auto (WPA or WPA2)
bws.WPAM.2,自动（WPA或WPA2)
#From:help877a,If you would like to be notified when new firmware is released, place a checkmark in the box next to <span class="option">Email Notification of Newer Firmware Version</span>.
help877a,如果您想在发布新固件时得到通知，请选择<span class="option">Email Notification of Newer Firmware Version</span>旁边的复选框。
#From:KR56,Add/Update
KR56,添加/更新
#From:LS424,Hostname
LS424,主机名
#From:GW_DHCPSERVER_DECLINED,The DHCP server address %v was declined by the network device - check your network for IP Address conflicts.
GW_DHCPSERVER_DECLINED,DHCP服务器地址%v被网络设备拒绝-请检查您网络的IP地址是否发生冲突。
#From:GW_SCHEDULES_DAY_INVALID,No day is selected
GW_SCHEDULES_DAY_INVALID,没有选中日期
#From:GW_NAT_UDP,UDP
GW_NAT_UDP,UDP
#From:IPSMTPCLIENT_CANNOT_CREATE_CONNECTION,Unable to create connection to email server
IPSMTPCLIENT_CANNOT_CREATE_CONNECTION,无法建立连接到邮件服务器
#From:.aa.check.all,Check All
.aa.check.all,检查全部
#From:YM94,Do you want to abandon changes you made to the reservation entry?
YM94,您想放弃您对该预留条目所作的更改吗？
#From:LS312,Renew
LS312,恢复
#From:KR2,Invalid IP address
KR2,无效的IP地址
#From:.vs.proto,Protocol
.vs.proto,协议
#From:GW_SMTP_TO_ADDRESS_INVALID,The given TO address (%s) is invalid
GW_SMTP_TO_ADDRESS_INVALID,分配的目的地址（%s) 无效
#From:WIFISC_AP_REGISTRATION_FAIL,AP failed to registere to Registrar (%s) through %s, reason (%s), err code (%u)
WIFISC_AP_REGISTRATION_FAIL,AP在寄存器的注册(%s)失败，通过（%s) ，原因（%s)，错误代码（%u)
#From:GW_WISH_RULES_NAME_ALREADY_USED,Name '%s' is already used.
GW_WISH_RULES_NAME_ALREADY_USED,名称 '%s'已被使用。
#From:LW48,When a LAN application that uses a protocol other than UDP, TCP, or ICMP initiates a session to the Internet, the router's NAT can track such a session, even though it does not recognize the protocol. This feature is useful because it enables certain applications (most importantly a single VPN connection to a remote host) without the need for an ALG.
LW48,当使用UDP，TCP，ICMP以外协议的LAN应用程序初始化一段连接到因特网的会话时，路由器的NAT将追踪到这个会话，即便它不能识别会话使用的协议。该功能是很有用的，因为它不需要ALG也可运行此类应用程序（最重要的是单一VPN连接到远端主机）。
#From:YM54,Invalid remote start IP Address.
YM54,无效的远端起始IP地址
#From:LW9,Current PIN
LW9,当前PIN
#From:LW41,This wizard is designed to assist you in your wireless network setup. It will guide you through step-by-step instructions on how to set up your wireless network and how to make it secure.
LW41,该向导可帮助您建立无线网络。它将一步一步地指导您如何建立您的无线网络并怎样让您的无线网络更安全。
#From:YM124,Enable Auto Channel Scan so that the router can select the best possible channel for your wireless network to operate on.
YM124,开启自动信道扫描，路由器可为您的无线网络选择最佳可用的信道。
#From:GW_WLAN_RTS_THRESHOLD_INVALID,RTS threshold should be between 0 and 2347.
GW_WLAN_RTS_THRESHOLD_INVALID,RTS 阈值应在0到2347之间。
#From:GW_WAN_L2TP_PASSWORD_INVALID,A L2TP password MUST be specified
GW_WAN_L2TP_PASSWORD_INVALID,L2TP的密码必须被指定。
#From:YM12,Some configuration changes have an effect upon other system settings. Those changes may impact in a negative way, raising warnings that need to be communicated to you. A warning may indicate a feature has been modified, or even disabled, to match the new operating conditions.
YM12,一些设置的更改会影响到其他的系统设定。这些设置可能会发生冲突，并且会向您发出警告。警告则说明某个功能为了匹配新的操作环境，被修改或被禁用了。
#From:ZM14,User is logging out
ZM14,用户正在注销
#From:KR60,In this case the term "port" refers to the Ethernet connectors on the device.
KR60,这种情况下“端口”就指的是设备上的以太网连接器。
#From:YM28,Invalid RTS Threshold
YM28,无效的RTS阈值
#From:YM184,The schedule is not valid.
YM184,此任务计划表无效
#From:int.intro.WCNWz7,If you would like to utilize our easy to use Web-based Wizards to assist you in configuring the Microsoft's Windows Connect Now technology, click on the Setup Wizard button below.
int.intro.WCNWz7,如果您希望使用我们的简易Web界面向导来帮助您配置Microsoft's Windows Connect Now技术，点击下面的Setup Wizard按钮。
#From:bws.Auth.2,Shared Key
bws.Auth.2,共享密钥
#From:rs.intro.1,The restored configuration file is not correct. You may have restored a file that is not intended for this device, or the restored file may be corrupted.
rs.intro.1,恢复的配置文件不正确。您可能恢复了一个不适用于该设备的文件，或恢复的文件已损坏。
#From:help92,The protocol used by the messages.
help92,信息使用的协议
#From:GW_NAT_BOTH,Both
GW_NAT_BOTH,都
#From:rs.success,Restore Success
rs.success,恢复成功
#From:up.tz.29b,(GMT+01:00) Budapest, Vienna, Prague, Warsaw
up.tz.29b,(GMT+01:00) 布达佩斯,维也纳,布拉格,华沙
#From:day,Day
day,日期
#From:GW_DHCP_SERVER_DISABLED_WARNING,<warn>DHCP Server is being disabled because the LAN subnet is not suitable</warn>
GW_DHCP_SERVER_DISABLED_WARNING,<warn>DHCP服务器被禁止了，因为LAN子网掩码不匹配</warn>
#From:YM173,Password and Verify Password do not match. Please reconfirm admin password.
YM173,密码和确认密码不匹配。请确认管理员密码。
#From:GW_INET_ACCESS_POLICY_MAC_INVALID,Invalid MAC address %m.
GW_INET_ACCESS_POLICY_MAC_INVALID,无效的MAC地址%m.
#From:LW2,Wi-Fi Protected Setup
LW2,Wi-Fi保护安装
#From:KR75,Assign any unused IP address in the range of IP addresses available for the LAN.
KR75,在IP地址范围内分配一个LAN可用任意IP地址。
#From:GW_XML_CONFIG_WRITE_FAILED,Failed to write configuration file: %s
GW_XML_CONFIG_WRITE_FAILED,编写配置文件失败：%s
#From:help102,Enable:
help102,启用：
#From:GW_WISH_RULES_NAME_USED_INVALID,Name '%s' is already used.
GW_WISH_RULES_NAME_USED_INVALID,名称'%s'已被使用
#From:GW_DHCP_SERVER_POOL_SIZE_IN_SUBNET_INVALID,The DHCP server pool size is too big to fit in LAN subnet %v.
GW_DHCP_SERVER_POOL_SIZE_IN_SUBNET_INVALID,DHCP服务器地址池大小超出了LAN子网掩码%v.
#From:aw.AS,Aggregation Max Size
aw.AS,聚合最大尺寸
#From:YM171,This is a list of all active conversations involving wireless clients in the local network.
YM171,这里列出了所有正在活动的会话，包括局域网内的无线用户。
#From:GW_DHCP_SERVER_RESERVED_IP_NOT_LAN_IP_INVALID,Reserved IP %v conflicts with configured LAN IP Address
GW_DHCP_SERVER_RESERVED_IP_NOT_LAN_IP_INVALID,预留IP%v与LAN配置的IP地址相冲突
#From:GW_NAT_VS_PUBLIC_PORT_CAN_NOT_MATCH_HTTP_ADMIN_PORT,Virtual server '%s' can not use the router's HTTP WAN administration port, %u
GW_NAT_VS_PUBLIC_PORT_CAN_NOT_MATCH_HTTP_ADMIN_PORT,虚拟服务器'%s'不能使用路由器的HTTP WAN管理员端口, %u
#From:hhav.r_netmask,The netmask field identifies the portion of the destination IP in use.
hhav.r_netmask,网络掩码字段定义了正在使用的目的IP部分。
#From:vs.vslist,VIRTUAL SERVERS LIST
vs.vslist,虚拟服务器列表
#From:YM137,Note that some of these options can interact with other port restrictions. Endpoint Independent Filtering takes priority over inbound filters or schedules, so it is possible for an incoming session request related to an outgoing session to enter through a port in spite of an active inbound filter on that port. However, packets will be rejected as expected when sent to blocked ports (whether blocked by schedule or by inbound filter) for which there are no active sessions. Port and Address Restricted Filtering ensures that inbound filters and schedules work precisely, but prevents some level of connectivity, and therefore might require the use of port triggers, virtual servers, or port forwarding to open the ports needed by the application. Address Restricted Filtering gives a compromise position, which avoids problems when communicating with certain other types of NAT router (symmetric NATs in particular) but leaves inbound filters and scheduled access working as expected.
YM137,请注意其中一些选项可与其他端口限定相结合。终端独立过滤器的优先级高于内部过滤器或计划表，所以对于一个涉及到外部会话的内部会话请求来说，就能通过端口进入，而不管端口上的内部过滤器。然而，数据包在发往被封闭（被计划表或内部过滤器封闭）的端口时将被拒绝，这些端口上没有激活的会话。端口和地址限制过滤器能确保内部过滤器和计划表精确的工作，但会阻止一些级别的连接，因此可能会需要使用端口激发、虚拟服务器或端口转发来打开应用程序需要的端口。地址限制过滤器提供了一个折衷的办法，既防止了与NAT路由器的一些其他类型通讯时的问题，又保留了内部过滤器和计划好的访问进程。
#From:YM74,Priority Classifiers
YM74,优先级分级器
#From:GW_SYSLOG_ADDRESS_IN_SUBNET_INVALID,Syslog server IP address %v is not in the lan subnet.
GW_SYSLOG_ADDRESS_IN_SUBNET_INVALID,系统日志IP地址%v不在LAN子网中。
#From:YM86,Enable this option if you want to allow WISH to prioritize wireless traffic.
YM86,如果您想对无线通讯的优先级进行分类的话，可开启这个选项。
#From:GW_MAC_FILTER_MAC_UNIQUENESS_INVALID,MAC address is already used: %m
GW_MAC_FILTER_MAC_UNIQUENESS_INVALID,MAC地址已被使用: %m
#From:KR40,Push Button
KR40,按钮
#From:GW_MAC_FILTER_NULL_MAC_INVALID,MAC address filter can't be NULL address: %m
GW_MAC_FILTER_NULL_MAC_INVALID,MAC地址过滤器不能为空: %m
#From:aw.32,32 Kbytes
aw.32,32 Kbytes
#From:GW_WAN_LAN_SUBNET_CONFLICT_INVALID,WAN subnet conflicts with LAN subnet
GW_WAN_LAN_SUBNET_CONFLICT_INVALID,WAN子网与LAN子网发生冲突。
#From:LW67,Enabled/Not Configured
LW67,开启/未 配置
#From:WIFISC_AP_DEL_APSETTINGS_FAIL,DelAPSettings by (%s) failed, reason (%s), err_code (%u)
WIFISC_AP_DEL_APSETTINGS_FAIL,DelAP设定(%s)失败，原因(%s)，错误代码(%u)
#From:wwl.wsp.chars.1,(13 characters or 26 hex digits)
wwl.wsp.chars.1,(13个字符或26个十六进制字符)
#From:KR85,WINS Servers store information regarding network hosts, allowing hosts to 'register' themselves as well as discover other available hosts, e.g. for use in Network Neighbourhood.
KR85,WINS服务器储存了网络主机的信息，可允许主机在发现了其他主机时将他们自己进行注册，例如在使用网上邻居时。
#From:YM115,Invalid MTU Size
YM115,无效的MTU尺寸
#From:YM83,Host 1 Port Range
YM83,一号主机端口范围
#From:wwl.128bits,128 bits
wwl.128bits,128 位
#From:LW51,When an excessive number of wireless packet collisions are occurring, wireless performance can be improved by using the RTS/CTS (Request to Send/Clear to Send) handshake protocol.
LW51,当过多的无线数据包冲突发生时，使用RTS/CTS握手协议（请求发送/可以发送）可使无线网络的性能得到增进。
#From:YM178,You must enter a numeric value between 0 and 8760 inclusive.
YM178,您必须在0到8760之间选择一个数字来输入。
#From:.aa.bsecure.cults,Cults
.aa.bsecure.cults,Cults
#From:YM5,Forbidden
YM5,禁止
#From:KR65,Firmware update checks
KR65,检查固件更新
#From:ZM17,Firmware updates are released periodically to improve the functionality of your router and to add features. If you run into a problem with a specific feature of the router, check if updated firmware is available for your router.
ZM17,固件更新是定期发布的，可增进您路由器的性能，并增加一些新的功能。如果您在运行一个路由器指定的功能时遇到了问题，请检查是否有新的更新可供您的路由器升级。
#From:LW14,<strong>Enable</strong> if other wireless devices you wish to include in the local network support Wi-Fi Protected Setup.
LW14,<strong>启用</strong> 如果您希望其他无线设备包含在本地网络中支持Wi-Fi保护安装。
#From:ta.wcn.bv,Save to Windows Connect Now
ta.wcn.bv,保存到Windows Connect Now
#From:GW_NAT_VS_IP_ADDRESS_CAN_NOT_MATCH_ROUTER,Virtual server '%s' can not use the router's IP address, %v.
GW_NAT_VS_IP_ADDRESS_CAN_NOT_MATCH_ROUTER,虚拟服务器'%s'无法使用路由器IP地址%v.
#From:GW_SCHEDULES_IN_USE_INVALID,Schedule '%s' can't be deleted or renamed because it is used.
GW_SCHEDULES_IN_USE_INVALID,计划表'%s'不能被删除或重命名，因为它正在被使用
#From:wepkey3,WEP Key 3
wepkey3,WEP密钥3
#From:KR69,Internet rate estimation
KR69,因特网率评估
#From:YM43,AIM Talk
YM43,AIM 对话
#From:YM45,ICQ
YM45,ICQ
#From:GW_SMTP_USERNAME_INVALID,User name is invalid
GW_SMTP_USERNAME_INVALID,用户名无效
#From:help362,Super G with Static Turbo
help362,带Static Turbo的Super G
#From:tf.intro.FWChA,If you would like to be notified when new firmware is released, place a checkmark in the box next to Email Notification of Newer Firmware Version.
tf.intro.FWChA,如果您希望在有新的固件发布时得到通知，请在选中Email Notification of Newer Firmware VersionIf 旁边的复选框。
#From:.remotedesktop,REMOTE DESKTOP
.remotedesktop,远程桌面连接
#From:KR29,PIN(1st half) Mismatch Detected
KR29,检测到PIN（1st half)不匹配
#From:help359,Super G Turbo Modes must use channel 6 for communication. For Super G with Static Turbo, <span class="option">802.11 Mode</span> must be set to 802.11g. For proper operation, RTS threshold and Fragmentation Threshold on the <a href="../Advanced/Advanced_Wireless.shtml">Advanced &rarr; Advanced Wireless</a> screen should both be set to their default values.
help359,Super G Turbo模式必须使用信道6来通讯。对于带Static Turbo的Super G，<span class="option">802.11 模式</span>必须被设为802.11g。正常的操作情况下，<a href="../Advanced/Advanced_Wireless.shtml">Advanced &rarr; Advanced Wireless</a>屏幕上的RTS阈值和碎片阈值都必须被设为缺省值。
#From:KR84,Configure the IP address of the preferred WINS server.
KR84,配置WINS服务器的IP地址。
#From:YM30,DTIM should be between 1 and 255.
YM30,DTIM应在1到255之间。
#From:at.LoPortR,Local Port Range
at.LoPortR,本地端口范围
#From:GW_DHCP_SERVER_POOL_FROM_IN_SUBNET_INVALID,DHCP server pool FROM %v is not in LAN subnet %v.
GW_DHCP_SERVER_POOL_FROM_IN_SUBNET_INVALID,DHCP服务器池FROM %v不在LAN子网%v中。
#From:GW_MAC_FILTER_MULTICAST_MAC_INVALID,MAC address filter can't be multicast address format: %m
GW_MAC_FILTER_MULTICAST_MAC_INVALID,MAC地址过滤器不能为多播地址格式: %m
#From:GW_SMTP_INIT_FAILED_WARNING,<warn>Initialisation of email failed</warn>
GW_SMTP_INIT_FAILED_WARNING,<warn>电子邮件初始化失败</warn>
#From:GW_DHCPSERVER_STOP,DHCP server stopped
GW_DHCPSERVER_STOP,DHCP服务器停止
#From:help350,To protect your privacy, use the wireless security mode to configure the wireless security features. This device supports three wireless security modes including: WEP, WPA-Personal, and WPA-Enterprise. WEP is the original wireless encryption standard. WPA provides a higher level of security. WPA-Personal does not require an authentication server. The WPA-Enterprise option does require a RADIUS authentication server.
help350,为了保护您的隐私，请使用无线安全模式来配置无线网安全功能。该设备支持三种无限安全模式，包括：WEP，WPA-Personal和WPA-Enterprise。WEP是最早的无线加密标准。WPA提供了更高级别的安全性。WPA-Personal不需要验证服务器。WPA-Enterprise选项需要一个RADIUS验证服务器。
#From:GW_NAT_DMZ_NOT_ALLOWED_INVALID,DMZ address %v is not allowed.
GW_NAT_DMZ_NOT_ALLOWED_INVALID,DMZ地址%v未被允许。
#From:YM143,When enabled, this option causes the router to automatically attempt to prioritize traffic streams that it doesn't otherwise recognize, based on the behaviour that the streams exhibit. This acts to deprioritize streams that exhibit bulk transfer characteristics, such as file transfers, while leaving interactive traffic, such as gaming or VoIP, running at a normal priority.
YM143,当这个功能开启时，路由器会自动给通讯数据流添加优先级，这些数据流路由器通过其表现出来的特性来进行识别。
#From:GW_XML_CONFIG_SET_FAILED,Failed to import configuration file #%u
GW_XML_CONFIG_SET_FAILED,导入配置文件失败#%u
#From:GW_NAT_PORT_DUP_INVALID,%s '%s' of '%s' should not contain duplicated numbers.
GW_NAT_PORT_DUP_INVALID, '%s' 的%s '%s'不能包含相同的数字。
#From:KR46,seconds for your wireless device to be connected. If you want to stop the process, click on the Cancel button below.
KR46,您的无线设备的连接时间。如果您想停止这个进程，请点击下面的Cancel按钮。
#From:KR35,Step 1: Select Configuration Method for your Wireless Network
KR35,第一步:为您的无线网络选择配置方式。
#From:GW_WAN_BIGPOND_PASSWORD_INVALID,A Big Pond password MUST be specified
GW_WAN_BIGPOND_PASSWORD_INVALID,Big Pond密码必须被指定
#From:YM57,Protocol must be specified.
YM57,必须指定一个协议
#From:KR104,The router must be rebooted before the new settings will take effect. You can reboot now, or you can continue to make other changes and reboot later.
KR104,要使新的设置生效必须重启路由器。您可以现在重启，也可以继续配置其他设置稍后再重启。
#From:IPSMTPCLIENT_MSG_WRONG_SENDER_ADDR_FORMAT,sender email address is in wrong format
IPSMTPCLIENT_MSG_WRONG_SENDER_ADDR_FORMAT,发送者的电子邮件地址格式不正确
#From:LS317,Logout
LS317,注销
#From:YM102,The entered passwords do not match
YM102,输入的密码不匹配
#From:help188,When WDS is enabled, this access point functions as a wireless repeater and is able to wirelessly communicate with other APs via WDS links. Note that WDS is incompatible with WPA -- both features cannot be used at the same time. A WDS link is bidirectional; so this AP must know the MAC Address (creates the WDS link) of the other AP, and the other AP must have a WDS link back to this AP.
help188,当WDS被开启后，这个作为无线转发器的接入点可通过WDS与其他AP进行无线通讯。请注意WDS与WPA不兼容，两个功能不是同时开启。WDS连接是双向的，因此AP（建立WDS连接的AP）必须知道其他AP的MAC地址，其他AP必须建立一个 连接回这个AP的WDS连接。
#From:.logsyslog.alert1,IP address is not valid
.logsyslog.alert1,IP地址无效
#From:KR3,Invalid MAC address
KR3,无效的MAC地址
#From:.aa.bsecure.hate,Hate
.aa.bsecure.hate,Hate
#From:GW_WLAN_11BG_CHANNEL_INVALID,Can not use 802.11a channel when the 802.11 mode is 802.11b/g.
GW_WLAN_11BG_CHANNEL_INVALID,当802.11模式为802.11b/g时，不能使用802.11信道。
#From:RATE_ESTIMATOR_RATE_COMPLETED,Rate estimation completed
RATE_ESTIMATOR_RATE_COMPLETED,速率评估完成
#From:wwl.alert.pv5.3,WEP key must be exactly 26 hexadecimal digits (0-9 or A-F).
wwl.alert.pv5.3,WEP密钥必须为26位十六进制数字 (0-9 或 A-F)。
#From:aw.aggr,Aggregation Limit
aw.aggr,聚合限制
#From:.wifisc.addstart,Started
.wifisc.addstart,开始
#From:help111,Specifies the interface -- LAN or WAN -- that the IP packet must use to transit out of the router, when this route is used.
help111,指定接口 -- LAN 或 WAN -- IP数据包将在该路由器被占用时用来转发。
#From:GW_QOS_RULES_REMOTE_IP_START_SUBNET,'%s': Remote IP start '%v' is in the LAN subnet
GW_QOS_RULES_REMOTE_IP_START_SUBNET,%s': 远端IP起始 '%v'在LAN子网内。
#From:YM22,Invalid Destination Port End for Port Filter
YM22,端口过滤器无效的目的端口终端
#From:GW_WLAN_WDS_MAC_ADDR_INVALID,Can not use a multicast MAC address in WDS.
GW_WLAN_WDS_MAC_ADDR_INVALID,在WDS中不能使用多播MAC地址。
#From:LW10,Reset PIN to Default
LW10,将PIN重置为缺省设置
#From:LT291,This area of the screen reflects configuration settings from the <a href="../Basic/Wireless.shtml">Setup &rarr; Wireless Settings</a> page. The <span class="option">MAC Address</span> is the factory-assigned identifier of the wireless card.
LT291,屏幕的这个区域显示了 <a href="../Basic/Wireless.shtml">安装 &rarr; 无线设置</a>页面的配置设定。<span class="option">MAC 地址</span>是厂商分配的无线网卡识别符。
#From:YM156,This section is where you define WISH Rules.
YM156,该项是用来定义WISH规则的。
#From:.aa.bsecure.age.ado,Adolescent (9-12)
.aa.bsecure.age.ado,初期 (9-12)
#From:wwl.text.good,Select this option if your wireless adapters DO NOT SUPPORT WPA
wwl.text.good,如果您的无线适配器不支持WPA，请选择这个选项
#From:GW_QOS_RULES_PRIORITY_RANGE,'%s': Priority, %d, needs to be between 1 and 255
GW_QOS_RULES_PRIORITY_RANGE,%s': 优先级, %d,在1到255之间
#From:YM134,Once a LAN-side application has created a connection through a specific port, the NAT will forward any incoming connection requests with the same port to the LAN-side application regardless of their origin. This is the least restrictive option, giving the best connectivity and allowing some applications (P2P applications in particular) to behave almost as if they are directly connected to the Internet.
YM134,当LAN端应用程序通过指定端口创建一个连接的时候，NAT将使用同一个端口转发所有的进入连接请求到LAN端应用程序，而不管其来源。这是限制最少的一个选项，可提供最佳的连接，并允许某些应用程序（特别是P2P程序）发挥最大性能，就像是被直接连接到因特网上一样。
#From:.aa.bsecure.web_mail,Web Mail
.aa.bsecure.web_mail,Web邮件
#From:help188b,Make sure the APs are configured with same channel number.
help188b,请确定AP是用同一个信道号配置的。
#From:GW_INET_ACL_START_IP_ADDRESS_IN_LAN_SUBNET_INVALID,Start IP address(%v) of '%s' should not be within LAN subnet(%v).
GW_INET_ACL_START_IP_ADDRESS_IN_LAN_SUBNET_INVALID,起始IP地址(%v)(%s)的不应包含在LAN子网内(%v)。
#From:at.title.Traff,WAN Traffic Shaping
at.title.Traff,WAN通讯修正
#From:help189,Specifies one-half of the WDS link. The other AP must also have the MAC address of this AP to create the WDS link back to this AP.
help189,指定WDS连接的一半。另一个AP必须获取这个AP的MAC地址以建立连接回这个AP的WDS连接。
#From:GW_WIRELESS_SWITCH_CHANNEL,Wireless radar detected, switch to channel %d
GW_WIRELESS_SWITCH_CHANNEL,检测到无限雷达，转换到信道%d
#From:GW_WAN_BIGPOND_SERVER_INVALID,A Big Pond server MUST be specified
GW_WAN_BIGPOND_SERVER_INVALID,Big Pond服务器必须被指定
#From:GW_XML_CONFIG_SET_PARSE,Configuration file parse error around line %u char %u
GW_XML_CONFIG_SET_PARSE,行 %u字符%u配置文件解析错误
#From:YM125,Enabling Hidden Mode is another way to secure your network. With this option enabled, no wireless clients will be able to see your wireless network when they scan to see what's available. For your wireless devices to connect to your router, you will need to manually enter the Wireless Network Name on each device.
YM125,开启隐藏模式是另一个保护您网络安全的方法。这个选项被开启后，其他无线用户在扫描是否有可用的无线网络连接时将不会扫描到您的无线网络。在您自己的无线设备连接到您的路由器时，您在每个设备上手动输入无线网络的名称。
#From:LT290wifisc,This area of the screen reflects configuration settings from the <a href="../Basic/Wireless.shtml">Setup &rarr; Wireless Settings</a> page, the <a href="../Advanced/WISH.shtml">Advanced &rarr; WISH</a> page and the <a href="../Advanced/Protected_Setup.shtml">Advanced &rarr; Wi-Fi Protected Setup</a> page. The <span class="option">MAC Address</span> is the factory-assigned identifier of the wireless card.
LT290wifisc,屏幕上的这个区域显示了<a href="../Basic/Wireless.shtml">Setup &rarr; Wireless Settings</a>，<a href="../Advanced/WISH.shtml">Advanced &rarr; WISH</a> 页面和<a href="../Advanced/Protected_Setup.shtml">Advanced &rarr; Wi-Fi Protected Setup</a>页面的配置设定。<span class="option">MAC Address</span> 是厂商分配的无线网卡识别符。
#From:GW_FIREWALL_RULE_NAME_INVALID,Rule name can not be empty string
GW_FIREWALL_RULE_NAME_INVALID,规则名称不能为空白的字符串
#From:GW_NAT_SCHEDULE,Schedule
GW_NAT_SCHEDULE,计划表
#From:help109,Specifies the next hop to be taken if this route is used. A gateway of 0.0.0.0 implies there is no next hop, and the IP address matched is directly connected to the router on the interface specified: LAN or WAN.
help109,指定当这个路由器正在被使用时需要的下一个跳数。0.0.0.0的网关表示没有下个跳数，且匹配的IP地址是通过指定的LAN或WAN接口直接连接到路由器的。 
#From:GW_LAN_RIP_MODE_INVALID,RIP mode is invalid.
GW_LAN_RIP_MODE_INVALID,RIP模式无效
#From:LW52,The wireless transmitter will begin to send RTS frames (and wait for CTS) when data frame size in bytes is greater than the RTS Threshold.
LW52,当以字节计算的数据帧大于RTS阈值时，无线发射器将开始发送RTS帧（并等待CTS）。
#From:.aa.bsecure.popups,Pop-ups
.aa.bsecure.popups,Pop-ups
#From:GW_WLAN_WPA_WPA2_TKIP_INVALID,WPA2 only mode doesn't support TKIP.
GW_WLAN_WPA_WPA2_TKIP_INVALID,WPA2单一模式不支持TKIP。
#From:KR16,2.4GHz
KR16,2.4GHz
#From:.vs.title,Virtual Server
.vs.title,虚拟服务器
#From:GW_WAN_PPPOE_USERNAME_INVALID,A PPPoE user name MUST be specified
GW_WAN_PPPOE_USERNAME_INVALID,PPPoE用户名必须被指定
#From:GW_WAN_PPTP_SUBNET_INVALID,Invalid PPTP subnet mask %v
GW_WAN_PPTP_SUBNET_INVALID,无效的PPTP子网掩码%v
#From:GW_DHCP_SERVER_NETBIOS_SCOPE_INVALID,NetBIOS Scope is not in a valid form
GW_DHCP_SERVER_NETBIOS_SCOPE_INVALID,NetBIOS Scope格式不正确
#From:KR94,Static IP mode is always on, so no action buttons are avaliable.
KR94,Static IP模式始终是开启的，所以没有激活按钮可用。
#From:YM63,WISH
YM63,WISH
#From:help108,Gateway:
help108,网关：
#From:GW_SCHEDULES_DUPLICATED_INVALID,This schedule is already used in '%s'
GW_SCHEDULES_DUPLICATED_INVALID,计划表已经在 '%s'中使用了
#From:bws.WPAM.1,WPA Only
bws.WPAM.1,WPA 单一模式
#From:KR11,Public port should be in range (1..65535) for virtual server
KR11,虚拟服务器的公共端口应在1到65535范围内
#From:LW45,If you already have a wireless network setup with Wi-Fi Protected Setup, click on <strong>Add Wireless Device Wizard</strong> to add new device to your wireless network.
LW45,如果您已经有一个Wi-Fi Protected Setup的无线网络，点击<strong>Add Wireless Device Wizard</strong>可添加一个新的设备到您的无线网络。
#From:KR6,Remote IP End
KR6,远端IP终端
#From:GW_DHCP_SERVER_NETBIOS_TYPE_INVALID,Invalid NetBIOS registration type
GW_DHCP_SERVER_NETBIOS_TYPE_INVALID,无效的NetBIOS注册类型
#From:.aa.bsecure.games,Games
.aa.bsecure.games,游戏
#From:KR42,Select this option if you want to configure your wireless device manually
KR42,如果您想手动配置您的无线设备，请选择这个选项
#From:YM104,Invalid Idle Time
YM104,无效的空闲时间
#From:.aa.bsecure.tickets,Tickets
.aa.bsecure.tickets,证书
#From:KR39,Select this option if your wireless device supports PIN
KR39,如果您的无线设备支持PIN，请选择这个选项
#From:bd.NETBIOS_REG_TYPE_M,Mixed-mode (Broadcast then Point-to-Point)
bd.NETBIOS_REG_TYPE_M,混合模式(广播以及点对点)
#From:help189a,Enter a MAC address for each of the other APs that you want to connect with WDS.
help189a,输入每个您想通过WDS连接的其他AP的MAC地址。
#From:GW_UPNP_IGD_PORTMAP_DEL,UPnP deleted entry %v <-> %v:%d %s
GW_UPNP_IGD_PORTMAP_DEL,UPnP删除条目 %v <-> %v:%d %s
#From:YM111,Invalid L2TP gateway IP address
YM111,无效的L2TP网关IP地址
#From:LS315,Disconnect
LS315,未连接
#From:GW_WLAN_WPA_PSK_LEN_INVALID,Incorrect key length, should be 8 to 63 characters long.
GW_WLAN_WPA_PSK_LEN_INVALID,不正确的密钥长度，应为8到63个字符长度。
#From:LW24,Personal
LW24,个人
#From:YM167,Getting active session list. Please wait
YM167,正在获取活动的会话列表。请等待
#From:help371,128-bit ASCII keys are up to 13 characters in length (2002HALOSWIN1 is a valid string of 13 characters for 128-bit encryption.)
help371,128位ASCII密钥最大长度为13个字符(2002HALOSWIN1就是一个有效的13个字符的128位加密）。
#From:.aa.bsecure.anarchy,Anarchy
.aa.bsecure.anarchy,Anarchy
#From:YM4,Reboot Later
YM4,稍后重启
#From:.aa.bsecure.criminal_skills,Criminal Skills
.aa.bsecure.criminal_skills,Criminal Skills
#From:YM188,Warnings have been raised as a result of configuration changes.\nThe system is unable to generate a list of those warnings right now, but will retry.
YM188,配置的更改会发出一个警告。\n当前，系统无法生成警告列表，稍后重试。
#From:YM133,The NAT Endpoint Filtering options control how the router's NAT manages incoming connection requests to ports that are already being used.
YM133,NAT终端过滤器选项控制路由器的NAT如何管理正在使用的端口的进入连接请求。
#From:YM59,Local start port should be between 0 and 65535 inclusive.
YM59,本地起始端口应在0到65535之间。
#From:.aa.bsecure.manually,Manually
.aa.bsecure.manually,手动
#From:YM169,Email address is not configured.
YM169,电子邮件地址未配置
#From:YM97,Use this section to configure the internal network settings of your router. The IP Address that is configured here is the IP Address that you use to access the Web-based management interface. If you change the IP Address here, you may need to adjust your PC's network settings to access the network again.
YM97,使用该选项来配置您的路由器的内部网络设定。此处配置的IP Address是您用来访问Web管理界面的IP地址。如果您更改了此处的IP地址，您可能需要重新调整您计算机的网络设置来访问网络。
#From:at.ESE,Enable QoS Engine
at.ESE,开启QoS引擎
#From:.aa.bsecure.age.child,Child (0-8)
.aa.bsecure.age.child,Child (0-8)
#From:help375,WPA is the older standard; select this option if the clients that will be used with the router only support the older standard. WPA2 is the newer implementation of the stronger IEEE 802.11i security standard. With the "WPA2" option, the router tries WPA2 first, but falls back to WPA if the client only supports WPA. With the "WPA2 Only" option, the router associates only with clients that also support WPA2 security.
help375,WPA是更老的标准；如果路由器只支持这个老的标准，可选择这个选项。WPA2是更强大的IEEE 802.11i安全标准。通过"WPA2"选项，路由器将会首相尝试使用WPA2，如果客户端只支持WPA，则路由器将返回到WPA。 在"WPA2 Only"选项时，路由器将只同支持WPA2的客户端进行通讯。
#From:GW_WEB_FILTER_WEBSITE_INVALID_INVALID,This web site address '%s' is invalid.
GW_WEB_FILTER_WEBSITE_INVALID_INVALID,网页地址'%s'无效。
#From:ZM21,Week
ZM21,周
#From:YM157,Internet Sessions
YM157,因特网会话
#From:help213,The WCN ActiveX Control provides the WCN link between your PC and the router via the browser that communicates wireless configuration data without a USB flash drive. The browser will attempt to download the WCN ActiveX Control, if it is not already available on your PC. For this action to succeed, you must already have a WAN connection, and the browser's internet security setting must be Medium or lower (select Tools &rarr; Internet Options &rarr; Security &rarr; Custom Level &rarr; Medium).
help213,WCN ActiveX Control为您的计算机和路由器之间提供了一个WCN连接，该连接可通过不需要USB闪存进行无线配置数据通讯的浏览器来进行。如果您的计算机没有WCN ActiveX Control，浏览器将会下载。要进行这一步，您必须有WAN连接，并且浏览器的因特网安全设置必须按为中级或更低（选择 &rarr; Internet Options &rarr; Security &rarr; Custom Level &rarr; Medium）。
#From:YM24,Are you sure you want to enable/disable
YM24,您确定要启用/禁用吗？
#From:WIFISC_AP_PEER_CFG_ERR,Peer configuration error %u
WIFISC_AP_PEER_CFG_ERR,同级配置错误%u
#From:LW43,If your wireless network is already set up with Wi-Fi Protected Setup, manual confguration of the wireless network will destroy the existing wireless network.
LW43,如果您的无线网络已经用Wi-Fi Protected Setup安装好了，手动配置无线网络将破坏现有的无线网络设置。
#From:help99.s,This section is where you define QoS Engine Rules.
help99.s,您可以在这里定义QoS引擎规则。
#From:YM90,Invalid Reservation MAC address
YM90,无效的预留MAC地址
#From:bws.CT.3,TKIP and AES
bws.CT.3,TKIP和AES
#From:help371.n,Note that, if you enter fewer characters in the WEP key than required, the remainder of the key is automatically padded with zeros.
help371.n,请注意，如果您输入的WEP密钥字符数少于规定的字符，则剩余的字符将自动以零来补足。
#From:GW_DHCP_SERVER_RESERVATION_RECONFIG_WARNING,<warn>A DHCP Reservation %v has been reconfigured to %v, please check this meets your network requirements.</warn>
GW_DHCP_SERVER_RESERVATION_RECONFIG_WARNING,<warn>预留DHCP%v已被重新配置成了%v，请确认更改符合您网络的要求。</warn>
#From:.r.alert3,Invalid Gateway for route
.r.alert3,无效的路由网关
#From:GW_LAN_RIP_METRIC_INVALID,RIP metric is invalid.
GW_LAN_RIP_METRIC_INVALID,RIP度量无效。
#From:YM118,WPA Group Key Update Interval should be between 30 and 65535 seconds.
YM118,WPA组密钥更新时间间隔应在30到65535之间。
#From:YM127,Invalid Gateway Address
YM127,无效的网关地址
#From:KR71,StreamEngine
KR71,StreamEngine
#From:aw.WDSEn,WDS Enable
aw.WDSEn,启用WDS
#From:KR32,Receive Unknown Message
KR32,接受未知信息
#From:sa.Local,Local
sa.Local,本地起始端口应在0到65535之间。
#From:GW_WEB_SERVER_IDLE_TIME,Idle time cannot be zero.
GW_WEB_SERVER_IDLE_TIME,停机时间不能为0。
#From:KR59,This option controls how the device reacts to traffic on the WAN connector.
KR59,该选项控制设备如何与WAN连接器的通讯相回应。
#From:GW_WAN_WAN_GATEWAY_IN_SUBNET_INVALID,WAN Gateway IP address %v must be within the WAN subnet.
GW_WAN_WAN_GATEWAY_IN_SUBNET_INVALID,WAN网管IP地址%v必须处在WAN掩码内。
#From:at.LoIPR,Local IP Range
at.LoIPR,本地IP范围
#From:YM81,Voice (VO)
YM81,Voice (VO)
#From:aw.AP,Aggregation Num Packets
aw.AP,聚合数字数据包
#From:LT290,This area of the screen reflects configuration settings from the <a href="../Basic/Wireless.shtml">Setup &rarr; Wireless Settings</a> page and the <a href="../Advanced/WISH.shtml">Advanced &rarr; WISH</a> page. The <span class="option">MAC Address</span> is the factory-assigned identifier of the wireless card.
LT290,屏幕的这个区域显示了 <a href="../Basic/Wireless.shtml">Setup &rarr; Wireless Settings</a> page and the <a href="../Advanced/WISH.shtml">Advanced &rarr; WISH</a>页面的配置设定。<span class="option">MAC Address</span>是由厂商分配的无线网卡的识别符。
#From:YM162,The priority given to packets sent wirelessly over this conversation by the WISH logic. The priorities are:
YM162,分配给数据包的优先级由WISH逻辑电路无线发送给该段对话。优先级为：
#From:GW_XML_CONFIG_SET_PARSE_MIME,Configuration file parse error (MIME)
GW_XML_CONFIG_SET_PARSE_MIME,配置文件解析错误(MIME)
#From:GW_NAT_UDP_PORT,UDP Port
GW_NAT_UDP_PORT,UDP端口
#From:YM9,Succeeded
YM9,成功
#From:GW_WAN_MTU_INVALID,The MTU size is invalid (the permitted range is %u to %u)
GW_WAN_MTU_INVALID,MTU尺寸无效(允许的范围为%u到%u)
#From:LW63,There are several ways to add a wireless device to your network. Access to the wireless network is controlled by a “registrar”. A registrar only allows devices onto the wireless network if you have entered the PIN, or pressed a special Wi-Fi Protected Setup button on the device. The router acts as a registrar for the network, although other devices may act as a registrar as well.
LW63,有几个方法可为您的网络添加无线设备。访问无线网络是由一个寄存器控制的。如果您输入了PIN，或按了设备上的Wi-Fi Protected Setup按钮，则寄存器只会允许无线网络上的设备访问。路由器将作为网络的寄存器来工作，其他设备也可作为寄存器。
#From:WIFISC_IR_REGISTRATION_SUCCESS,Successfully added station %s (%m)
WIFISC_IR_REGISTRATION_SUCCESS,添加工作站成功%s (%m)
#From:help105,The IP address of packets that will take this route.
help105,将使用这个路由器的数据包的IP地址。
#From:GW_DHCPSERVER_RELEASED,The DHCP server address %v was released by the network device - the network device no longer wants to use it.
GW_DHCPSERVER_RELEASED,DHCP服务器地址%v是由网络设备发布的，该网络设备将不再使用这个地址。
#From:LW32,Launch Printer Setup Wizard
LW32,打开打印机安装向导
#From:WIFISC_AP_SET_APSETTINGS_FAIL,SetAPSettings by (%s) failed, reason (%s), err_code (%u)
WIFISC_AP_SET_APSETTINGS_FAIL,用(%s)设置AP设定失败，原因 (%s)，错误代码 (%u)
#From:KR8,Invalid IP address for route
KR8,路由器的IP地址无效
#From:hhav.r_name,The name field allows you to specify a name for identification of this route, e.g. 'Network 2'
hhav.r_name,名称字段允许您为路由器指定一个用来鉴别的名称，例如'Network 2'
#From:bd.NETBIOS_REG_TYPE_H,Hybrid (Point-to-Point then Broadcast)
bd.NETBIOS_REG_TYPE_H,混合 (点对点和广播)
#From:KR55,While not a perfect mapping, the following loose correspondences between the "cone" classification and the "endpoint filtering" modes can be drawn: if this router is configured for endpoint independent filtering, it implements full cone behavior; address restricted filtering implements restricted cone behavior; and port and address restricted filtering implements port restricted cone behavior.
KR55,当映射不完整时，接下来的"cone"级别和"终端过滤器"模式之间的通信可被设定为：如果该路由器被设置为终端独立过滤器，它将执行所有的命令；地址限制过滤则只执行限制的命令；而端口和地址限制过滤器则执行端口限制命令。d port and address restricted filtering implements port restricted cone behavior.
#From:GW_WAN_PPPOE_LAN_SUBNET_CONFLICT_INVALID,PPPoE IP address %v conflicts with LAN subnet
GW_WAN_PPPOE_LAN_SUBNET_CONFLICT_INVALID,PPPoE IP地址%v与LAN子网发生冲突
#From:GW_XML_CONFIG_SET_SUCCESS,Successfully imported configuration file
GW_XML_CONFIG_SET_SUCCESS,成功导入配置文件
#From:YM60,Local end port should be between 0 and 65535 inclusive.
YM60,本地终端端口应在0到65535之间
#From:KR100,Save Settings Failed
KR100,保存设置失败
#From:KR61,Select this option if the WAN port is connected to the Internet. The device functions as a NAT router.
KR61,如果WAN端口被连接到了因特网，请选择这个选项。该设备具有NAT路由器的功能。
#From:bws.WKL.0,64 bit (10 hex digits)
bws.WKL.0,64位 (10个十六进制数字)
#From:bws.msg.WPA,Use <strong>WPA or WPA2</strong> mode to achieve a balance of strong security and best compatibility. This mode uses WPA for legacy clients while maintaining higher security with stations that are WPA2 capable. Also the strongest cipher that the client supports will be used. For best security, use <strong>WPA2 Only</strong> mode. This mode uses AES(CCMP) cipher and legacy stations are not allowed access with WPA security. For maximum compatibility, use <strong>WPA Only</strong>. This mode uses TKIP cipher. Some gaming and legacy devices work only in this mode.
bws.msg.WPA,使用<strong>WPA或WPA2</strong>模式来获得安全性和兼容性的最佳平衡点。此模式为老用户使用WPA，而通过使用具有WPA2功能的工作站来获得更好的安全性。用户支持的最强大的密码也将被使用。为了最高的安全性，请使用<strong>WPA2 Only</strong>模式。此模式使用AES(CCMP)密码，且使用WPA安全机制的旧工作站不能访问。为了最大的兼容性，请使用<strong>WPA Only</strong>。该模式使用TKIP密码。某些游戏和旧的设备只支持这个模式。
#From:YM109,Invalid L2TP IP address
YM109,无效的 L2TP IP地址
#From:WIFISC_AP_RESET_FAIL,Reset by %s failed, reason (%s), err_code (%u)
WIFISC_AP_RESET_FAIL,%s重启失败，原因 (%s)，错误代码 (%u)
#From:GW_WISH_RULES_HOST2_PORT,'%s': Host 2 port start, %u, must be less than host 2 port end, %u
GW_WISH_RULES_HOST2_PORT,%s'：2号主机起始端口 %u，必须少于2号主机结束端口， %u
#From:help.ts.ls,Load Settings From Local Hard Drive
help.ts.ls,从本地硬盘读取设定
#From:YM101,Invalid WAN gateway IP address
YM101,无效的WAN网管IP地址
#From:KR50,Auto
KR50,自动
#From:YM56,Protocol must be a number.
YM56,协议必须为一个数字
#From:aa.WebSite.Domain,Website URL/Domain
aa.WebSite.Domain,站点URL/域
#From:GW_QOS_RULES_MAX_TRANS,Max transmission rate should be between 8 kbps and 100 Mbps, inclusive.
GW_QOS_RULES_MAX_TRANS,最大传输速率必须被包括在8kpbs到100Mbps之间。
#From:GW_QOS_RULES_PROTOCOL,'%s': Protocol, %d, needs to be between 0 and 257
GW_QOS_RULES_PROTOCOL,%s':协议, %d应在0到257之间。
#From:GW_WEB_SERVER_NO_ACCESS,You must have at least one of HTTP or HTTPS enabled.
GW_WEB_SERVER_NO_ACCESS,您至少应有一个HTTP被启用
#From:KR87,Configure the IP address of the backup WINS server, if any.
KR87,如果有，请配置备用WINS服务器IP地址。
#From:GW_WISH_RULES_DUPLICATED,'%s' is duplicate of '%s'
GW_WISH_RULES_DUPLICATED,%s'是 '%s'的复制
#From:YM16,Destination IP Start address should not be in LAN subnet
YM16,目的IP起始地址不应在子网内
#From:GW_SCHEDULES_NAME_CONFLICT_INVALID,Name '%s' is already used
GW_SCHEDULES_NAME_CONFLICT_INVALID,名称'%s'已经被使用了
#From:wepkey4,WEP Key 4
wepkey4,WEP Key 4
#From:GW_WEB_SERVER_SAME_PORT_WAN,HTTP and HTTPS cannot occupy the same WAN port.
GW_WEB_SERVER_SAME_PORT_WAN,HTTP 与HTTPS不能占用相同的WAN端口。
#From:YM65,invalid source ending IP Address.
YM65,无效的源结束IP地址
#From:bln.title,Network Settings
bln.title,网络设置
#From:WIFISC_AP_PROXY_PROCESS_FAIL,STA with MAC (%m) failed to register in, reason (%s), err_code (%u)
WIFISC_AP_PROXY_PROCESS_FAIL,MAC地址为 (%m)的STA注册失败，原因（%s）, 错误代码 (%u)
#From:.more,More
.more,更多
#From:ZM12,Send/Receive login
ZM12,发送/接收登录
#From:.aa.bsecure.banner_ad,Banner Ad
.aa.bsecure.banner_ad,Banner Ad
#From:LY23,Wireless Status
LY23,无线状态
#From:help88b,For most applications, automatic classification will be adequate, and specific QoS Engine Rules will not be required.
help88b,对大多数应用程序来说，自动分级就足够了，指定的QoS引擎规则将不会被要求。
#From:bwl.NSS.h1,Selecting more than one spatial stream can increase throughput, but can in some cases decrease signal quality.
bwl.NSS.h1,选择多个空间流可增加吞吐量，但有时也会降低信号质量。
#From:help203,Note: Do not connect more than one USB flash drive to the router, not even with a USB hub.
help203,注意: 不要将一个以上的USB闪存连接到路由器上，即便是通过USB集线器。
#From:GW_INET_ACL_NO_MACHINE_IN_LAN_SUBNET_INVALID,There is no machine defined in policy %s.
GW_INET_ACL_NO_MACHINE_IN_LAN_SUBNET_INVALID,政策%s中没有定义计算机。
#From:LW39c,Before launching these wizards, please make sure you have followed all steps outlined in the Quick Installation Guide included in the package.
LW39c,在打开这些向导之前，请确认您所有的步骤都是按照此安装包中快速安装向导所描述的。
#From:WIFISC_AP_SET_SELECTED_REGISTRAR_COMPLETE,Set Selected Registrar complete
WIFISC_AP_SET_SELECTED_REGISTRAR_COMPLETE,选择的寄存器设置完成
#From:GW_DHCP_CLIENT_CLIENT_NAME_INVALID,Invalid DHCP Client name
GW_DHCP_CLIENT_CLIENT_NAME_INVALID,无效的DHCP客户端名称
#From:YM166,Failed to retrieve active session list. Retrying
YM166,检索已激活的会话列表失败。正在重试
#From:WIFISC_AP_REBOOT_FAIL,Reboot by %s fail, reason (%s), err_code (%u)
WIFISC_AP_REBOOT_FAIL,%s重启失败，原因(%s), 错误代码 (%u)
#From:help91,The priority of the message flow is entered here -- 1 receives the highest priority (most urgent) and 255 receives the lowest priority (least urgent).
help91,信息数据流的优先级在这里设定-- 1接收最高优先级(最紧急的)，255接收最低优先级(最不紧急的)。
#From:LW39,The following Web-based wizards are designed to assist you in your wireless network setup and wireless device connection.
LW39,接下来的网页向导是用来帮助您建立无线网络和无线设备链接的。
#From:YM174,Password and Verify Password do not match. Please reconfirm user password.
YM174,密码和确认密码不匹配。请核对您的用户密码。
#From:YM13,A Port Filter rule name cannot be blank.
YM13,端口过滤器规则名称不能为空。
#From:YM172,Your web browser is too old to use this web site. Please upgrade your browser.
YM172,您的浏览器版本过低，不能使用该站点。请更新您的浏览器。
#From:YM31,Invalid TPC Max Gain
YM31,无效的TPC最大收益
#From:.aa.wiz.s6.msg,Select the Sentinel categories to filter.
.aa.wiz.s6.msg,选择过滤器的识别器类型
#From:GW_SMTP_PASSWORD_INVALID,Password is invalid
GW_SMTP_PASSWORD_INVALID,密码无效
#From:YM85,Host 2 Port Range
YM85,2号主机端口范围
#From:GW_SCHEDULES_NAME_INVALID,The 'Name' field can not be blank
GW_SCHEDULES_NAME_INVALID,Name'字段不能为空
#From:LS204,Invalid Gateway
LS204,无效的网关
#From:aw.16,16 Kbytes
aw.16,16 Kbytes
#From:aw.erpe.h3,(Refer to the <a href="../Basic/Wireless.shtml"> Setup &rarr; Wireless Settings &rarr; Manual Wireless Network Setup</a> page.)
aw.erpe.h3,(参见 <a href="../Basic/Wireless.shtml"> 安装 &rarr; 无线设置 &rarr; 手动无线网络设置</a> 页面。)
#From:LW64,Start the wizard.
LW64,开始向导
#From:.days,Day(s)
.days,天数
#From:at.intro,Use this section to configure D-Link's QoS Engine powered by StreamEngine&trade; Technology. The QoS Engine improves your online gaming experience by ensuring that your game traffic is prioritized over other network traffic, such as FTP or Web.
at.intro,使用该项来配置StreamEngine&trade; Technology研发的D-Link's QoS引擎。QoS引擎可通过让您的游戏通讯数据的优先级始终处于其他网络通讯如FTP或WEB之上来增进您的在线游戏性能。 
#From:help103,Specifies whether the entry will be enabled or disabled.
help103,指定启用或禁用该条目
#From:YM183,-
YM183,-
#From:YM117,Invalid Group Key Update Interval.
YM117,无效的组密钥更新周期
#From:KR54,Formerly, the terms "Full Cone", "Restricted Cone", "Port Restricted Cone" and "Symmetric" were used to refer to different variations of NATs. These terms are purposely not used here, because they do not fully describe the behavior of this router's NAT.
KR54,以前，"Full Cone", "Restricted Cone", "Port Restricted Cone"和"Symmetric" 条款是源于NATs的不同变化的。这些条款不会在这里使用，因为他们不能完全的描述出路由器NAT的行为。
#From:av.intro.r,This Routing page allows you to specify custom routes that determine how data is moved around your network.
av.intro.r,此路由页面允许您指定自定义的路由器，可决定您网络周围的数据如何移动。
#From:help368,64-bit hexadecimal keys are exactly 10 characters in length. (12345678FA is a valid string of 10 characters for 64-bit encryption.)
help368,64位十六进制密钥是10个字符的长度。（12345678FA对于64位加密来说就是一个有效的字符串）
#From:hhav.enable,Each route has a check box next to it, check this box if you want the route to be enabled.
hhav.enable,每个路由器旁边有个复选框，如果您想启用这个路由器的话请选择复选框。
#From:GW_WAN_DNS_SERVERS_INVALID,DNS Servers must be configured.
GW_WAN_DNS_SERVERS_INVALID,必须配置DNS服务器
#From:.rs.succeeded,Restore Succeeded
.rs.succeeded,恢复成功
#From:GW_WAN_PPTP_USERNAME_INVALID,A PPTP user name MUST be specified
GW_WAN_PPTP_USERNAME_INVALID,必须指定一个PPTP用户名
#From:GW_WAN_L2TP_IP_ADDRESS_INVALID,Invalid L2TP IP address: %v
GW_WAN_L2TP_IP_ADDRESS_INVALID,无效的 L2TP IP地址： %v
#From:GW_INET_ACL_NAME_INVALID,Name can not be empty string.
GW_INET_ACL_NAME_INVALID,名称不能为空白的字符串
#From:days,Days
days,天数
#From:KR88,This is an advanced setting and is normally left blank. This allows the configuration of a NetBIOS 'domain' name under which network hosts operate.
KR88,这是一个高级设置且通常都为空。可配置网络主机操作的NetBIOS 的域名。
#From:GW_WAN_PPPOE_IP_ADDRESS_INVALID,Invalid PPPoE IP address: %v
GW_WAN_PPPOE_IP_ADDRESS_INVALID,无效的PPPoE IP地址：%v
#From:KR19,For good security it should be of ample length and should not be a commonly known phrase.
KR19,为了更高的安全性，它应该有足够的长度并且不能为一个总所周知的短语。
#From:RATE_ESTIMATOR_RATE_COMPLETED_WITH_SPEED,Rate estimation completed. Upstream speed is %u kbps
RATE_ESTIMATOR_RATE_COMPLETED_WITH_SPEED,速率评估完成。上行速率为%u kbps
#From:YM27,Invalid Beacon Period
YM27,无效的信标周期
#From:LT291wifisc,This area of the screen reflects configuration settings from the <a href="../Basic/Wireless.shtml">Setup &rarr; Wireless Settings</a> page and the <a href="../Advanced/Protected_Setup.shtml">Advanced &rarr; Wi-Fi Protected Setup</a> page. The <span class="option">MAC Address</span> is the factory-assigned identifier of the wireless card.
LT291wifisc,屏幕的这个区域显示了<a href="../Basic/Wireless.shtml">Setup &rarr; Wireless Settings</a>页面的配置。<a href="../Advanced/Protected_Setup.shtml">MAC Address</a>是由制造商分配的无线网卡的标识符。
#From:KR1,Port Filter name
KR1,端口过滤器名称
#From:YM51,Rule \'
YM51,规则\'
#From:ZM13,Send/Receive heartbeat
ZM13,发送/接收 heartbeat
#From:GW_LAN_PRIMARY_DNS_INVALID,Primary DNS is invalid.
GW_LAN_PRIMARY_DNS_INVALID,主要DNS无效
#From:GW_WLAN_11A_DFS_TURBO_INVALID,Can not use Turbo in 11a mode.
GW_WLAN_11A_DFS_TURBO_INVALID,在11a模式下不能使用TURBO。
#From:YM123,Changing your Wireless Network Name is the first step in securing your wireless network. Change it to a familiar name that does not contain any personal information.
YM123,更改您的无线网络名称是保护您无线网络的第一步。把它更改为一个您熟悉的名称，但不要包含任何个人信息。
#From:TA8,If you have devices on your network that should always have fixed IP addresses, add a <strong>DHCP Reservation </strong> for each such device.
TA8,如果您网络上的设备总是需要一个固定的IP地址，可为每个设备添加<strong>动态主机配置协议保留</strong>。
#From:KR9,Invalid IP address for virtual server
KR9,虚拟服务器IP地址无效
#From:KR79,For example, 192.168.0.1.
KR79,例如, 192.168.0.1.
#From:GW_QOS_RULES_REMOTE_IP,'%s': Remote IP start, '%v' ,must be less than remote IP end, '%v'
GW_QOS_RULES_REMOTE_IP,%s': 远端起始IP, '%v' 必须少于远端结束IP, '%v'
#From:.aa.bsecure.age.adult,Adult (18+)
.aa.bsecure.age.adult,成人 (18+)
#From:ZM7,Uninitalized
ZM7,未初始化
#From:YM23,Destination Port Start should not be greater than Destination Port End for Port Filter
YM23,端口过滤器的目的起始端口不能高于目的结束端口
#From:tf.USSW,Note: Some firmware upgrades reset the router's configuration options to the factory defaults.\n Before performing an upgrade, be sure to save the current configuration from the Tools-System screen.\n Do you still want to upgrade?
tf.USSW,请注意：一些固件更新会将路由器的配置恢复到出厂缺省设置。\n 在运行更新之前，请确认已将当前配置保存到了Tools-System。\n 您仍然要进行更新吗？
#From:help78,Enable this option for better performance and experience with online games and other interactive applications, such as VoIP.
help78,开启这个选项可增进在线游戏和其他交互式应用程序如VoIP的性能和效果。
#From:YM73,Enable WISH
YM73,开启WISH
#From:LS425,Expires
LS425,到期
#From:wwl.WK,Wep Key
wwl.WK,WEP密钥
#From:LW11,Generate New PIN
LW11,生成新的PIN
#From:GW_NAT_PPTP_ALG_ACTIVATED_WARNING,<warn>The PPTP ALG has been automatically enabled because a virtual server entry you created requires it.</warn>
GW_NAT_PPTP_ALG_ACTIVATED_WARNING,<warn>因您创建的虚拟服务器条目的需要，PPTP ALG会被自动开启。</warn>
#From:YM35,Are you sure you want to delete
YM35,您确定要删除吗？
#From:tsc.sel_days,Select Day(s)
tsc.sel_days,选择天数
#From:sc.intro.rb4,The router must be rebooted before the restored settings will take effect. You can reboot now, or you can continue to make other changes and reboot later.
sc.intro.rb4,路由器重启后更改的设置才会生效。您可以立即重启，也可继续进行其他配置稍后再重启。
#From:GW_SCHEDULES_TIME_INVALID,Invalid Time for schedule name: '%s'
GW_SCHEDULES_TIME_INVALID,计划表名称的时间无效: '%s'
#From:GW_DHCP_SERVER_LEASE_TIME_INVALID,Lease time is invalid (must be 1 to 65535)
GW_DHCP_SERVER_LEASE_TIME_INVALID,最小时间无效 (必须在1到65535之间)
#From:IPSMTPCLIENT_NO_SERVER_IP_ADDRESS,Unable to send email since server IP address could not resolved
IPSMTPCLIENT_NO_SERVER_IP_ADDRESS,服务器IP地址确定之前不能发送邮件
#From:KR10,Private port should be in range (1..65535) for virtual server
KR10,虚拟服务器的私有端口范围应在(1..65535)
#From:GW_WEB_FILTER_HTTPS_NOT_SUPPORTED_INVALID,https is not a supported protocol.
GW_WEB_FILTER_HTTPS_NOT_SUPPORTED_INVALID,不支持https协议
#From:KR22,The Wireless Device PIN should be either 4 or 8 digits
KR22,无线设备的PIN可为4或8个数字
#From:.vs.both,Both
.vs.both,都
#From:wwl.alert.pv5.4,The Wireless Security Password must be at least 8 characters.
wwl.alert.pv5.4,无限安全密码不能少于8个字符
#From:GW_WIFISC_LOCK_VERIFY_ERR,AP should not be locked before configuring.
GW_WIFISC_LOCK_VERIFY_ERR,AP在配置之前不能被锁定。
#From:LW53,Wireless frames can be divided into smaller units (fragments) to improve performance in the presence of RF interference and at the limits of RF coverage.
LW53,无线数据帧可被分成更小的单元（碎片）以增进其在RF接口中存在的性能和RF覆盖范围中的限制。
#From:GW_WEB_FILTER_WEB_SITE_IS_USED_INVALID,The web site address '%s' already used.
GW_WEB_FILTER_WEB_SITE_IS_USED_INVALID,网络站点地址'%s'已被使用。
#From:YM64,invalid source starting IP Address.
YM64,无效的源起始IP地址
#From:GW_ROUTES_INTERFACE_INVALID,Route interface is invalid
GW_ROUTES_INTERFACE_INVALID,路由器接口无效
#From:GW_LAN_SECONDARY_DNS_INVALID,Secondary DNS is invalid.
GW_LAN_SECONDARY_DNS_INVALID,备选DNS无效
#From:bd.NETBIOS_LEARN_FROM_WAN_ENABLE,Learn NetBIOS from WAN
bd.NETBIOS_LEARN_FROM_WAN_ENABLE,从WAN学习 NetBIOS
#From:GW_NAT_PORT_FORWARDING_TABLE_RECONFIGURED_WARNING,<warn>Port Forwarding Table is being reconfigured because the LAN subnet has been changed.</warn>
GW_NAT_PORT_FORWARDING_TABLE_RECONFIGURED_WARNING,<warn>端口转发表被重新配置了，因为LAN子网已更改。</warn>
#From:KR15,802.11 Band
KR15,802.11 波段
#From:WIFISC_AP_REGISTRATION_UNEXPECTED_EVENT,AP failed to registere to Registrar (%s) through %s, unexpected (%s), at state (%s)
WIFISC_AP_REGISTRATION_UNEXPECTED_EVENT,AP通过%s注册到寄存器(%s)失败，不预期(%s)，状态(%s)
#From:GW_SYSLOG_ADDRESS_NOT_IN_SUBNET_WARNING,<warn>Syslog server IP address is no longer in the LAN subnet, this may need to be reconfigured.</warn>
GW_SYSLOG_ADDRESS_NOT_IN_SUBNET_WARNING,<warn>系统日志服务器IP地址不在LAN子网内，这可能需要重新配置。</warn>
#From:GW_DHCP_SERVER_NETBIOS_SECONDARY_WINS_INVALID,Invalid secondary WINS IP address
GW_DHCP_SERVER_NETBIOS_SECONDARY_WINS_INVALID,无效的备选WINS服务器IP地址
#From:LW49,Note that this feature does not apply to the DMZ host (if one is enabled). The DMZ host always handles these kinds of sessions.
LW49,请注意该功能将不会应用到DMZ主机（如果被开启的话）。DMZ主机总是在处理这类会话。
#From:KR95,Add/Update Schedule Rule
KR95,添加/更新计划表规则
#From:aw.8,8 Kbytes
aw.8,8 Kbytes
#From:YM114,Invalid secondary DNS server IP address
YM114,无效的备选DNS服务器IP地址
#From:bws.CT,Cipher Type
bws.CT,密码类型
#From:.aa.bsecure.rrated,R-rated
.aa.bsecure.rrated,R级
#From:LW6,Lock Wireless Security Settings
LW6,锁定无限安全设定
#From:bws.msg.WEP.2,You may also enter any text string into a WEP key box, in which case it will be converted into a hexadecimal key using the ASCII values of the characters. A maximum of 5 text characters can be entered for 64 bit keys, and a maximum of 13 characters for 128 bit keys.
bws.msg.WEP.2,您也可以在WEP密钥框中输入一个文本字符串，这个字符串将通过使用字符的ASCII值被转换成十六进制密钥。64位密钥最多可输入5个文本字符，128位密钥最多可输入13个。
#From:GW_QOS_RULES_LOCAL_IP,'%s': Local IP start, '%v', must be less than local IP end, '%v'
GW_QOS_RULES_LOCAL_IP,%s':本地起始IP, '%v',必须小于本地结束IP, '%v'
#From:GW_DHCP_SERVER_POOL_FROM_TO_ORIENTATION_INVALID,Pool IP address FROM must not be bigger than TO.
GW_DHCP_SERVER_POOL_FROM_TO_ORIENTATION_INVALID,IP地址池 FROM必须小于TO。
#From:bws.CT.1,TKIP
bws.CT.1,TKIP
#From:GW_XML_CONFIG_SET_LOCK,Configuration database lock failed #%u
GW_XML_CONFIG_SET_LOCK,配置数据库锁失败#%u
#From:GW_DHCP_SERVER_RESERVED_IP_UNIQUENESS_INVALID,Reserved IP %v conflicts with another reservation
GW_DHCP_SERVER_RESERVED_IP_UNIQUENESS_INVALID,保留的IP%v与另一个保留的IP发生冲突
#From:wepkey2,WEP Key 2
wepkey2,WEP密钥 2
#From:LW28,Manual Internet Connection Options
LW28,手动因特网连接选项
#From:.wepkey1,WEP Key 1
.wepkey1,WEP密钥1
#From:KR83,Turn this setting off to configure manually.
KR83,关掉此项以进行手动配置。
#From:GW_SYSLOG_ADDRESS_INVALID,Syslog server IP address is invalid.
GW_SYSLOG_ADDRESS_INVALID,日志服务器IP地址无效
#From:YM105,Invalid PPTP IP address
YM105,PPTP IP地址无效
#From:ZM5,DHCP Client
ZM5,DHCP 客户端
#From:help212,WCN ActiveX Control
help212,WCN ActiveX 控件
#From:KR45,Please push button on your wireless device, then click on the Connect button below.
KR45,请按您的无线设备上的按钮，然后点击下面的连接按钮。
#From:help19x2,To specify any other protocol, select "Other" from the list, then enter the corresponding protocol number (<a href="http://www.iana.org/assignments/protocol-numbers" target="_blank"> as assigned by the IANA</a>) in the <span class="option">Protocol</span> box.
help19x2,要指定任何其他的协议，从列表中选择"Other"，然后在<a href="http://www.iana.org/assignments/protocol-numbers" target="_blank">Protocol</a>栏输入相对应的协议号码（<span class="option">由IANA分配的）。
#From:KR36,Step 2: Connect your Wireless Device
KR36,步骤2：连接您的无线设备
#From:GW_ROUTES_METRIC_INVALID,Route metric %u is invalid, must be from 1 to 16
GW_ROUTES_METRIC_INVALID,路由器量度 %u无效，必须为1到16
#From:GW_WLAN_SSID_INVALID,The SSID field can not be blank.
GW_WLAN_SSID_INVALID,SSID栏不能为空。
#From:LS46,Invalid IP Address
LS46,无效的IP地址
#From:YM179,The timeout value cannot be less than or equal to zero.
YM179,超时值不能小于等于零。
#From:KR78,The IP address of the router on the local area network.
KR78,局域网路由器的IP地址。
#From:KR66,The bridge checks the support site for updates by way of the upstream router.
KR66,网桥为上行路由器检查更新支持站点。
#From:.aa.bsecure.magazine,Magazine
.aa.bsecure.magazine,杂志
#From:KR101,The device may be too busy to properly receive it right now. Please try to save the settings again.
KR101,设备可能太忙无法立即接收到。请再尝试一次保存设置。
#From:GW_WLAN_WPA_WPA_AES_INVALID,WPA only mode doesn't support AES.
GW_WLAN_WPA_WPA_AES_INVALID,WPA 单一模式不支持AES。
#From:GW_NAT_INBOUND_FILTER,Inbound Filter
GW_NAT_INBOUND_FILTER,内部过滤器
#From:GW_INET_ACL_POLICY_NAME_INVALID,The Policy Name cannot be blank.
GW_INET_ACL_POLICY_NAME_INVALID,政策名称不能为空
#From:sa.Internet,Internet
sa.Internet,因特网
#From:GW_WLAN_11A_DFS_CHANNEL_INVALID,Per regulatory request, channel 52 - 140 can not be used without enable radar detection.
GW_WLAN_11A_DFS_CHANNEL_INVALID,每个调整的请求，信道52 - 140在没有开启雷达检测是都不能被使用。
#From:YM153,The rule applies to a flow of messages for which host 1's port number is within the range set here.
YM153,应用到信息数据流的规则可在此处配置，该信息包含了1号主机的端口号码。
#From:at.ReIPR,Remote IP Range
at.ReIPR,远端IP范围
#From:LW15,Only "Admin" account can change security settings.
LW15,仅"管理员"帐号可更改安全设置。
#From:GW_WLAN_DTIM_INVALID,DTIM should be between 1 and 255.
GW_WLAN_DTIM_INVALID,DTIM必须在1到255之间。
#From:YM144,A WISH Rule identifies a specific message flow and assigns a priority to that flow.
YM144,WISH规则可识别指定的信息数据流，并为这个数据流分配一个优先级。
#From:up.tz.26,(GMT+01:00) Amsterdam, Berlin, Bern, Rome, Stockholm
up.tz.26,(GMT+01:00) 阿姆斯特丹,柏林,伯尔尼,罗马,斯德哥尔摩
#From:help71,Select a filter that controls access as needed for this rule. If you do not see the filter you need in the list of filters, go to the <a href="../Advanced/Inbound_Filter.shtml"> Advanced &rarr; Inbound&nbsp;Filter</a> screen and create a new filter.
help71,根据该规则的需要选择一个控制访问的过滤器。如果在过滤器列表中您没有找到您需要的过滤器，可到<a href="../Advanced/Inbound_Filter.shtml"> 高级&rarr;内部过滤器</a>页面创建一个新的过滤器。
#From:GW_PURE_ADDPORTMAPPING_MODIFY,HNAP AddPortMapping modified %dth virtual server entry from '%s' %v:%d<->%v:%d %S to '%s' %v:%d<->%v:%d %S
GW_PURE_ADDPORTMAPPING_MODIFY,HNAP 添加端口映射已修改%dth虚拟服务器条目从'%s' %v:%d<->%v:%d %S到'%s' %v:%d<->%v:%d %S
#From:tsc.pingt.msg10,User stopped
tsc.pingt.msg10,用户停止
#From:tps.foo,The printer's IP address and TCP port number are shown <a href="../Status/PS.shtml" onclick="return jump_if();">here</a>.
tps.foo,打印机IP地址和TCP端口号在<a href="../Status/PS.shtml" onclick="return jump_if();">这里</a>显示。
#From:GW_PURE_ADDPORTMAPPING_CHG_PROTOCOL,HNAP AddPortMapping modified %dth virtual server entry from '%s' %v:%d<->%v:%d %S to %S
GW_PURE_ADDPORTMAPPING_CHG_PROTOCOL,HNAP 添加端口映射已修改%dth虚拟服务器条目从'%s' %v:%d<->%v:%d %S 到%S
#From:LOG_PREV_MSG_REPEATED_N_TIMES,Above message repeated %d times
LOG_PREV_MSG_REPEATED_N_TIMES,以上信息重复 %d 次
#From:ca.intro,The <strong>user</strong> account may not perform the requested action.
ca.intro,<strong>用户</strong>帐号不能执行要求的行为。
#From:GW_WAN_LAN_ADDRESS_CONFLICT_DHCP,The addressing of the Internet side learnt thru DHCP conflicts with the addressing selected for the LAN side. Internet communications will be disabled until you have changed the LAN side addressing to resolve the problem.
GW_WAN_LAN_ADDRESS_CONFLICT_DHCP,因特网端的寻址通过DHCP与LAN端以选地址的冲突来获取。因特网通信将被禁用，直到您更改LAN端寻址来解决了这个问题。
#From:help176,The section lists the current Inbound Filter Rules. An Inbound Filter Rule can be changed by clicking the Edit icon, or deleted by clicking the Delete icon. When you click the Edit icon, the item is highlighted, and the "Update Inbound Filter Rule" section is activated for editing.
help176,该段列出了当前的内部过滤器规则。内部过滤器规则可通过点击Edit来更改，或点击Delete来删除。当您点击Edit时，该项将显示为高亮，且"Update Inbound Filter Rule"项被激活以便进行编辑。
#From:GW_PURE_ADDPORTMAPPING_CREATE,HNAP AddPortMapping created %dth virtual server entry '%s' %v:%d<->%v:%d %S
GW_PURE_ADDPORTMAPPING_CREATE,HNAP 添加端口映射已创建 %dth 虚拟服务器条目'%s' %v:%d<->%v:%d %S
#From:hhag.30,Select a schedule for when the rule will be enabled. If you do not see the schedule you need in the list of schedules, go to the <a href="../Tools/Schedules.shtml" onclick="return jump_if();">Tools → Schedules</a> screen and create a new schedule.
hhag.30,选择一个计划表来决定规则什么时候启用。如果您在计划表列表中没有找到您想要的计划表，您可以在<a href="../Tools/Schedules.shtml" onclick="return jump_if();">工具 → 计划表</a>处新建一个。
#From:hhai.save,Click the <strong>Add</strong> or <strong>Update</strong> button to store a finished rule in the Rules List below.
hhai.save,点击 <strong>设置</strong>或<strong>更新</strong>键，将完成的规则保存到下面的规则列表中。
#From:ADMIN,Administrator
ADMIN,管理员
#From:wprn.s1a,The following printer has been detected. Click <em>Next</em> to install the printer onto your computer.
wprn.s1a,下列打印机被检测到。点击<em>下一步</em>将打印机安装到您的计算机上。
#From:sl.alert.3,Email notification is not enabled.
sl.alert.3,邮件通知未开启
#From:help900,After configuring the router for dynamic DNS, you can open a browser and navigate to the URL for your domain (for example <code>http://www.mydomain.info</code>) and the router will attempt to forward the request to port 80 on your LAN. If, however, you do this from a LAN-side computer and there is no virtual server defined for port 80, the router will return the router's configuration home page. Refer to the <a href="../Advanced/Virtual_Server.shtml">Advanced &rarr; Virtual&nbsp;Server</a> configuration page to set up a a virtual server.
help900,在配置了路由器的动态DNS后，您可以打开浏览器并输入您的域名连接到URL（例如<code>http://www.mydomain.info</code>），然后路由器将开始尝试将请求转发到LAN的端口80。然而，如果您是在LAN端计算机做这一步操作且端口80没有定义虚拟服务器，路由器将跳转到路由器的配置主页。请参见<a href="../Advanced/Virtual_Server.shtml">高级&rarr;虚拟服务器</a> 配置页面来建立虚拟服务器。
#From:tps.foo2,The printer's IP address and queue name are shown <a href="../Status/PS.shtml" onclick="return jump_if();">here</a>.
tps.foo2,打印机的IP地址和序列号在<a href="../Status/PS.shtml" onclick="return jump_if();">这里</a>显示。
#From:help182,This setting should remain at its default value of 2346 bytes.
help182,该设置应保持它的缺省值2346字节。
#From:aa.alert.12,IP address should be in LAN subnet.
aa.alert.12,IP地址应在LAN子网内。
#From:tf.intro.FWCh,To check for the latest firmware, click the [Check Online Now...] button.
tf.intro.FWCh,检查最新的固件，请点击[Check Online Now...]按钮。
#From:ts.ss,Save To Local Hard Drive
ts.ss,保存到本地硬盘
#From:wwa.title.set.pptp,Set Username and Password Connection (PPTP)
wwa.title.set.pptp,设置用户名和密码连接(PPTP)
#From:.hostname.eg,(e.g.: me.mydomain.net)
.hostname.eg,(e.g.: me.mydomain.net)
#From:wwl.s4.note,Note: You will need to enter the same password as keys in this step into your wireless clients in order to enable proper wireless communication.
wwl.s4.note,请注意：在这一步您需要在您的无限客户端输入和密钥相同的密码来启动无线通信。
#From:help22,Select a filter that controls access as needed for this virtual server. If you do not see the filter you need in the list of filters, go to the <a href="../Advanced/Inbound_Filter.shtml"> Advanced &rarr; Inbound&nbsp;Filter</a> screen and create a new filter.
help22,为这个虚拟服务器选择一个控制访问的过滤器。如果您在过滤器列表中没有找到您需要的过滤器，您可以在<a href="../Advanced/Inbound_Filter.shtml">高级&rarr;内部过滤器</a>页面创建一个新的过滤器。
#From:wwl.alert.pv5.1,The Wireless Security Password must be 13 alphanumeric characters or 26 hex digits. You entered
wwl.alert.pv5.1,无限安全密码必须为13个字母或26个十六进制数字。您输入了
#From:GW_PURE_SETWLANSETTINGS24,HNAP SetWLanSettings24 set Enabled %s, SSIDBroadcast %s, Channel %d
GW_PURE_SETWLANSETTINGS24,HNAP 开启WLanSettings24设定%s, SSID广播 %s,信道 %d
#From:help167,Specify the LAN IP address of the LAN computer that you want to have unrestricted Internet communication. If this computer obtains its address Automatically using DHCP, then you may want to make a static reservation on the <a href="../Basic/Network.shtml">Setup &rarr; Network&nbsp;Settings</a> page so that the IP address of the DMZ computer does not change.
help167,指定局域网计算机的IP地址，您希望这台计算机的因特网通讯不受任何限制。如果这台计算机是使用DHCP自动获取IP地址，你可能需要在<a href="../Basic/Network.shtml">设置&rarr; 网络设置</a>页面为其设置一个静态IP地址，DMZ计算机的IP地址就不会改变。
#From:at.DxDSL,Detected xDSL or Other Frame Relay Network
at.DxDSL,检测到xDSL或其他帧中继网络
#From:wprn.bados2,The Printer Setup Wizard supports only Windows XP/2000/98/ME operating systems. Your computer uses the <span id="wz_page_1_err_1_os">&nbsp;</span> operating system.
wprn.bados2,打印机安装向导仅支持Windows XP/2000/98/ME操作系统。您的计算机使用<span id="wz_page_1_err_1_os"> </span>操作系统。
#From:wprn.s3a,The setup executable you have just launched will display a progress bar and notify you when setup is complete. When done, click <em>Finish</em> below to close the Printer Setup wizard.
wprn.s3a,您执行安装时可显示一个进度条，在安装完成时通知您。当安装完成后，点击下面的<em>完成</em>关闭打印机安装向导。
#From:wprn.tt10,If the setup executable did not launch automatically after downloading to your computer, you may need to open the file-download folder using a file browser and double-click on the icon labeled <em>Printer_Setup.exe.</em>
wprn.tt10,如果安装文件在下载到您的计算机后没有自动运行，您则需要文件浏览器打开下载文件夹然后双击图标<em>Printer_Setup.exe</em>
#From:bwn.IF,WAN Ping <a href="Inbound_Filter.shtml" onclick="return jump_if();">Inbound Filter</a>
bwn.IF,WAN Ping <a href="Inbound_Filter.shtml" onclick="return jump_if();">内部过滤器</a>
#From:1044a,Note, however, if the AP's settings specify "DHCP (Dynamic)" Address, and the router's DHCP server assigns a domain name to the AP, that domain name will override any name you enter here.
1044a,请注意，如果AP的设置指定了"DHCP (动态)"地址，而路由器的DHCP服务器分配了一个域名给AP，则域名将会复写您在这里输入的所有名称。
#From:wprn.tt6,Attempt to fix the problem with the printer, then click <em>Refresh</em> to update printer status.
wprn.tt6,尝试修复打印机问题，点击<em>刷新</em>更新打印机状态。
#From:help72,Select a schedule for the times when this rule is in effect. If you do not see the schedule you need in the list of schedules, go to the <a href="../Tools/Schedules.shtml"> Tools &rarr; Schedules</a> screen and create a new schedule.
help72,当该规则生效时，选择一个时间计划表。如果您在计划表列表中没有找到您想要的计划表，您可以在<a href="../Tools/Schedules.shtml">工具&rarr;计划表</a>页面创建一个新的计划表。
#From:.sdi.s6,Unknown
.sdi.s6,未知
#From:hhpt.sch,Select a schedule for when the service will be enabled. If you do not see the schedule you need in the list of schedules, go to the <a href="../Tools/Schedules.shtml" onclick="return jump_if();">Tools → Schedules</a> screen and create a new schedule.
hhpt.sch,当该服务被开启时选择一个计划表。如果您在计划表中没有找到您想要的计划表，您可以在<a href="../Tools/Schedules.shtml" onclick="return jump_if();">工具→计划表</a>页面创建一个新的计划表。
#From:wprn.tt2,Enable raw TCP port printing from the <em>Print Server </em> page under the <em>Tools</em> submenu.
wprn.tt2,在<em>Tools</em>子菜单下的<em>Print Server </em>页面开启后台TCP端口打印。
#From:sl.alert.2,This log will be sent to email address
sl.alert.2,日志将会被发送到电子邮件地址
#From:anet.wp.2,Auto 10/100/1000Mbps
anet.wp.2,自动10/100/1000Mbps
#From:tss.RestAll,Restore all settings to the factory defaults.
tss.RestAll,将所有设定恢复到出厂缺省设置。
#From:GW_PURE_SETWANSETTINGS,HNAP SetDeviceSettings set wan mode to %S, %v/%v/%v
GW_PURE_SETWANSETTINGS,HNAP设置设备设定将WAN模式设为%S, %v/%v/%v
#From:help53,Select a schedule for when this rule is in effect. If you do not see the schedule you need in the list of schedules, go to the <a href="../Tools/Schedules.shtml"> Tools &rarr; Schedules</a> screen and create a new schedule.
help53,当该服务被开启时选择一个计划表。如果您在计划表中没有找到您想要的计划表，您可以在<a href="../Tools/Schedules.shtml">工具→计划表</a>页面创建一个新的计划表。
#From:help175,Saves the new or edited Inbound Filter Rule in the following list.
help175,将新增或编辑后的内部过滤器规则保存到下面的列表中。
#From:help872,If you selected the On Schedule option, select one of the defined schedule rules. If you do not see the schedule you need in the list of schedules, go to the <a href="../Tools/Schedules.shtml">Tools &rarr; Schedules</a> screen and create a new schedule.
help872,如果您选择了On Schedule选项，则请选择一个定义好的计划表规则。如果您在计划表中没有找到您想要的计划表，您可以在<a href="../Tools/Schedules.shtml">工具→计划表</a>页面创建一个新的计划表。
#From:help785,The transmission standard being used by the client. Values are 11a, 11b, 11g, or 11n for 802.11a, 802.11b, 802.11g, or 802.11n respectively.
help785,传输标准正在被客户端使用。标准有11a, 11b, 11g, 或or 11n 分别对应802.11a, 802.11b, 802.11g, or 802.11n。
#From:wprn.s2b,After clicking <em>Next</em>, you will be asked for permission to download an executable file. Please click <em>Run/Open</em> to allow the executable to run on your computer. If a second window appears prompting you to verify the publisher, please click <em>Run</em> again.
wprn.s2b,点击<em>下一步</em>以后，您将会被要求需要下载可执行文件的许可。请点击<em>运行/开始</em>来允许可执行文件在您的计算机上运行。如果第二个窗口弹出来要求您验证发布商，请再点击一次<em>运行</em>。
#From:wprn.intro2,The wizard will guide you through the following steps. Click <em>Next</em> to begin.
wprn.intro2,向导将会通过下面几个步骤引导您。点击<em>下一步</em>开始。
#From:aa.alert.13,Please select a filter.
aa.alert.13,请选择一个过滤器。
#From:help890,When this option is enabled, an email will be sent to the email address configured in the email section whenever new firmware is available. You must have Email Notification enabled from the <a href="../Tools/EMail.shtml">Tools &rarr; Email&nbsp;Settings</a> page.
help890,当该选项被开启后，只要有可用的新固件，一封电子邮件就将被发送到在邮件选项里配置好的电子邮件地址。您必须在<a href="../Tools/EMail.shtml">工具&rarr; Email设置</a>页面打开邮件通知功能。
#From:help814,The IP address and, where appropriate, port number of the local application.
help814,本地应用程序适当的IP地址和端口号。
#From:help283,Time interval the machine can be idle before the PPTP connection is disconnected. The Maximum Idle Time value is only used for the "On demand" and "Manual" reconnect modes.
help283,PPTP连接之前计算机的闲置时间间隔是断开的。最大闲置时间仅适用于"On demand"和"Manual"重连接模式。
#From:sps.protdis,This printing protocol is currently disabled. You can enable it <a href="../Tools/PS.shtml" onclick="return jump_if();">here</a>.
sps.protdis,打印协议在当前已被禁用。您可以在<a href="../Tools/PS.shtml" onclick="return jump_if();">这里</a>开启。
#From:help831,Select a filter that controls access as needed for this admin port. If you do not see the filter you need in the list of filters, go to the <a href="../Advanced/Inbound_Filter.shtml" onclick="return jump_if();">Advanced &rarr; Inbound&nbsp;Filter</a> screen and create a new filter.
help831,为管理员端口选择一个控制访问的过滤器。如果您在过滤器列表中没有找到您需要的过滤器，您可以在<a href="../Advanced/Inbound_Filter.shtml" onclick="return jump_if();">高级&rarr;内部过滤器</a>页面创建一个新的过滤器。
#From:.cantapplysettings,Insufficient Permissions
.cantapplysettings,不足许可
#From:help39,Allows H.323 (specifically Microsoft Netmeeting) clients to communicate across NAT. Note that if you want your buddies to call you, you should also set up a virtual server for NetMeeting. Refer to the <a href="../Advanced/Virtual_Server.shtml"> Advanced &rarr; Virtual Server</a> page for information on how to set up a virtual server.
help39,允许H.323 (特别是微软Netmeeting)客户端通过NAT进行通讯。请注意如果您希望您的朋友可以呼叫您，则您需要为NetMeeting建立一个虚拟服务器。请参见<a href="../Advanced/Virtual_Server.shtml">高级&rarr; 虚拟服务器</a>页面以获取如何建立虚拟服务器的信息。
#From:WCN_LOG_ABORT,WCN configuration aborted due to %s
WCN_LOG_ABORT,WCN配置因%s的原因而被放弃
#From:up.tz.73,(GMT+13:00) Nuku'alofa, Tonga
up.tz.73,(GMT+13:00) 努库阿洛法,汤加
#From:help141.a,The Web sites listed here are used when the Web Filter option is enabled in <a href="../Advanced/Access_Control.shtml">Advanced &rarr; Access&nbsp;Control</a>.
help141.a,当<a href="../Advanced/Access_Control.shtml">高级 &rarr;访问控制</a>的网页过滤器选项启用时，列在此处的站点将被使用。
#From:af.intro.x,The Firewall Settings allow you to set a single computer on your network outside of the router.
af.intro.x,防火墙设置允许您在网络上的路由器以外设置一台单一计算机。
#From:help170,Add/Update Inbound Filter Rule
help170,添加/更新内部过滤器规则
#From:tps.intro4,To use the shared printer from this computer, launch the Printer Wizard from the <a href="../Basic/Wizard.shtml" onclick="return jump_if();"> <i>Wizard </i> page</a>.
tps.intro4,要在该计算机上使用共享打印机，可在<a href="../Basic/Wizard.shtml" onclick="return jump_if();"> <i>向导 </i>页面e</a>打开打印机向导。
#From:wprn.tt7,OR, click <em>Next</em> to continue anyway and later choose <em>No</em> when asked if you'd like to print a test page.
wprn.tt7,或者, 点击<em>下一步</em>以继续，然后当询问您是否要打印测试页时选择<em>否</em>。
#From:GW_DHCPSERVER_START,Starting DHCP server
GW_DHCPSERVER_START,正在启动DHCP服务器
#From:help887,Some firmware upgrades reset the configuration options to the factory defaults. Before performing an upgrade, be sure to save the current configuration from the <a href="../Tools/System.shtml">Tools &rarr; System</a> screen.
help887,一些固件更新会将配置重置为出厂设置。所以在进行更新之前，请确定已在<a href="../Tools/System.shtml">工具 &rarr; 系统</a>页面保存了当前设置。
#From:help38,Allows FTP clients and servers to transfer data across NAT. Refer to the <a href="../Advanced/Virtual_Server.shtml">Advanced &rarr; Virtual Server</a> page if you want to host an FTP server.
help38,允许FTP客户端和服务器通过NAT来传输数据。请参见<a href="../Advanced/Virtual_Server.shtml">高级&rarr;虚拟服务器</a>页面如果您想将一个FTP服务器设为主机。
#From:wwl.title.wel,Welcome to the Wireless Security Setup Wizard
wwl.title.wel,欢迎来到无线安全安装向导
#From:help164,SPI ("stateful packet inspection" also known as "dynamic packet filtering") helps to prevent cyberattacks by tracking more state per session. It validates that the traffic passing through that session conforms to the protocol.
help164,SPI ("标准数据包验证"也被成为"动态数据包过滤")可通过跟踪每个会话的更多的状态来防止网络攻击。它可确认通过该段会话的通讯都符合协议。
#From:hhav.filt,Select a filter that restricts the Internet hosts that can access this virtual server to hosts that you trust. If you do not see the filter you need in the list of filters, go to the <a href="../Advanced/Inbound_Filter.shtml" onclick="return jump_if();"> Advanced &rarr; Inbound&nbsp;Filter</a> screen and create a new filter.
hhav.filt,选择一个用来限制可通过虚拟服务器访问您信任主机的因特网主机的过滤器。 如果您在过滤器列表中没有找到您需要的过滤器，您可以在<a href="../Advanced/Inbound_Filter.shtml" onclick="return jump_if();">高级&rarr;内部过滤器</a>页面创建一个新的过滤器。 
#From:GW_PURE_ADDPORTMAPPING_CONFLICT,HNAP AddPortMapping '%s' %v:%d<->%v:%d %S conflict with %dth virtual server entry '%s' %v:%d<->%v:%d %S
GW_PURE_ADDPORTMAPPING_CONFLICT,HNAP添加端口映射'%s' %v:%d<->%v:%d %S与%dth虚拟服务器条目'%s' %v:%d<->%v:%d %S发生冲突。
#From:GW_PURE_SETROUTERLANSETTINGS,HNAP SetRouterLanSettings set RouterIPAddress %v, RouterSubnetMask %v, DHCPServerEnabled %s
GW_PURE_SETROUTERLANSETTINGS,HNAP路由器LAN设定设置路由器IP地址%v,路由器子网掩码%v, DHCP服务器开启%s
#From:GW_PURE_SETWLANSECURITY,HNAP SetWLanSecurity set Enabled %s, Type %s
GW_PURE_SETWLANSECURITY,HNAP WLAN安全设置开启 %s, 类型%s
#From:aa.alert.9,The Policy Name cannot be blank.
aa.alert.9,政策名称不能为空
#From:help287,Time interval the machine can be idle before the L2TP connection is disconnected. The Maximum Idle Time value is used for the "On demand" and "Manual" reconnect modes.
help287,L2TP连接之前计算机的闲置时间间隔是断开的。最大闲置时间仅适用于"On demand"和"Manual"重连接模式。
#From:ta.RAIF,Remote Admin <a href="../Advanced/Inbound_Filter.shtml" onclick="return jump_if();">Inbound Filter</a>
ta.RAIF,远程管理员<a href="../Advanced/Inbound_Filter.shtml" onclick="return jump_if();">内部过滤器</a>
#From:help180,This setting should remain at its default value of 2346 bytes.
help180,该设置应保持它的缺省值2346字节。
#From:GW_PURE_SETDEVICESETTINGS,HNAP SetDeviceSettings changed DeviceName to '%s'
GW_PURE_SETDEVICESETTINGS,HNAP 设备设置将设备名称改为'%s'
#From:.rssi,Signal
.rssi,信号
#From:wwl.intro.wel,This wizard will guide you through a step-by-step process to set up your wireless network and make it secure.
wwl.intro.wel,该向导可帮助您建立无线网络。它将一步一步地指导您如何建立您的无线网络并怎样让您的无线网络更安全。
#From:tf.ClickDL,Click here to access firmware online.
tf.ClickDL,点击这里以在线访问固件。
#From:help165,DMZ means "Demilitarized Zone." If an application has trouble working from behind the router, you can expose one computer to the Internet and run the application on that computer.
help165,DMZ意思是"非军事区域。"如果某个应用程序在路由器下工作有困难，您可以将一台计算机暴露在因特网上并在那台计算机上运行该程序。
#From:at.Prot.-1,Other
at.Prot.-1,其他
#From:tps.intro5,To use the shared printer from this computer, follow the setup instructions found in <a href="../Help/Basic.shtml#PS" onclick="return jump_if();" style="white-space: nowrap;">Help -> Home -> Printer Wizard</a>.
tps.intro5,要使用此计算机上的共享打印机，请按照<a href="../Help/Basic.shtml#PS" onclick="return jump_if();" style="white-space: nowrap;">帮助 &rarr; 家庭 &rarr; 打印机向导中的步骤进行。
#From:ub.intro.1,The uploaded firmware file may not be correct. You may have uploaded a file that is not intended for this device, or the uploaded file may be corrupted.
ub.intro.1,上传的固件文件可能不正确。您可能上传了一个不适用于该设备的固件，或上传的文件已被损坏。
#From:help277,Time interval the machine can be idle before the PPPoE connection is disconnected. The Maximum Idle Time value is only used for the "On demand" and "Manual" reconnect modes.
help277,PPPoE连接之前计算机的闲置时间间隔是断开的。最大闲置时间仅适用于"On demand"和"Manual"重连接模式。
#From:help41,This feature enables forwarding of "magic packets" (that is, specially formatted wake-up packets) from the WAN to a LAN computer or other device that is "Wake on LAN" (WOL) capable. The WOL device must be defined as such on the <a href="../Advanced/Virtual_Server.shtml"> Advanced &rarr; Virtual Server</a> page. The LAN IP address for the virtual server is typically set to the broadcast address 192.168.0.255. The computer on the LAN whose MAC address is contained in the magic packet will be awakened.
help41,该功能可开启将“魔法数据包”(特殊格式的唤醒数据包)从WAN转发到LAN计算机或其他具有“局域网唤醒”（WOL）的设备上。WOL设备必须在<a href="../Advanced/Virtual_Server.shtml"> Advanced &rarr; Virtual Server</a>页面定义。虚拟服务器的LAN IP地址被专门设为广播地址192.168.0.255。局域网上的MAC地址被包含在魔法数据包中的计算机将被唤醒。
#From:VIRTUAL_SERVERS,Virtual Server
VIRTUAL_SERVERS,虚拟服务器
#From:hhav.sch,Select a schedule for when the virtual server will be enabled. If you do not see the schedule you need in the list of schedules, go to the <a href="../Tools/Schedules.shtml" onclick="return jump_if();">Tools &rarr; Schedules</a> screen and create a new schedule.
hhav.sch,选择一个计划表来决定虚拟服务器将在何时被开启。如果您在计划表中没有找到您想要的计划表，您可以在<a href="../Tools/Schedules.shtml" onclick="return jump_if();">工具 &rarr; 计划表</a>页面创建一个新的计划表。
#From:ts.rfd,Restore To Factory Default
ts.rfd,恢复到出厂缺省设置
#From:help33b,When the PPTP ALG is enabled, LAN computers can establish PPTP VPN connections either with the same or with different VPN servers. When the PPTP ALG is disabled, the router allows VPN operation in a restricted way 。 LAN computers are typically able to establish VPN tunnels to different VPN Internet servers but not to the same server. The advantage of disabling the PPTP ALG is to increase VPN performance. Enabling the PPTP ALG also allows incoming VPN connections to a LAN side VPN server (refer to <a href="../Advanced/Virtual_Server.shtml">Advanced &rarr; Virtual Server</a>).
help33b,当PPTP ALG被开启的时候，LAN计算机可与相同或不同的VPN服务器建立PPTP VPN连接。当PPTP ALG被禁用后，路由器将允许VPN在受限的模式下操作 。 LAN计算机只能与不同的VPN因特网服务器建立VPN通道。禁用PPTP ALG的优点就是可提高VPN的性能。开启PPTP ALG也可允许进入的VPN连接到LAN端VPN服务器(请参见 <a href="../Advanced/Virtual_Server.shtml"> 高级 &rarr; 虚拟服务器</a>)。
#From:ts.ls,Load From Local Hard Drive
ts.ls,从本地硬盘加载
#From:wwl.intro.s1,Your wireless network needs a name so it can be easily recognized by wireless clients. For security purposes, it is highly recommended to change the pre-configured network name.
wwl.intro.s1,您的无线网络需要一个名称以便能被无限客户端很容易的识别。为了安全起见，强烈推荐您更改预设的网络名称。
#From:GW_PURE_DELETEPORTMAPPING_MODIFY,HNAP DeletePortMapping %s:%d modified %dth virtual server entry '%s' %v:%d<->%v:%d %S to %S
GW_PURE_DELETEPORTMAPPING_MODIFY,HNAP 删除端口映射 %s:%d 修改 %dth 虚拟服务器条目'%s' %v:%d<->%v:%d %S 到 %S
#From:wprn.s2c,After clicking <em>Next</em>, you will be asked for permission to download an executable file. Please click 'OK' to download the the file.<br/><br/>To launch the executable, you may need to open the file-download folder using a file browser and double-click on the icon labeled <em>Printer_Setup.exe</em>.
wprn.s2c,在点击<em>下一步</em>后，您会被要求下载可执行文件的许可。请点击'OK'下载文件。<br/><br/>运行可执行文件，您需要使用文件浏览器打开文件下载文件夹并双击图标<em>打印机安装.exe</em>.
#From:help320,It is possible for a computer or device that is manually configured to have an address that does reside within this range. In this case the address should be reserved (see <a href="#Static_DHCP">DHCP Reservation</a> below), so that the DHCP Server knows that this specific address can only be used by a specific computer or device.
help320,对于手动配置的计算机或设备来说，有可能含有在这个范围内的地址。这种情况下，地址应被保留(参加下面的<a href="#Static_DHCP">DHCP预留</a>)，DHCP服务器才能知道这个指定的地址只能被指定的计算机或设备使用。
#From:help813,The Internet Sessions page displays full details of active Internet sessions through your router. An Internet session is a conversation between a program or application on a LAN-side computer and a program or application on a WAN-side computer.
help813,因特网会话页面显示了所有通过您的路由器的正在活动的会话的详细信息。因特网会话是LAN端计算机或程序与WAN端计算机或程序之间的对话。
#From:help893,Select a dynamic DNS service provider from the pull-down list, or you may enter a dynamic DNS service provider manually.
help893,从下拉菜单中选择一个动态DNS服务提供商，您也可以手动输入一个动态DNS服务提供商。
#From:help803,Select this option to save the router log to a file on your computer.
help803,选择这个选项将路由器日志保存到您计算机上的文件中。
#From:help877,To check for the latest firmware, click the <span class="button_ref">Check Online Now</span> button.
help877,要检查最新的固件，请点击<span class="button_ref">立即在线检查</span>按钮。
#From:up.tz.27,(GMT+01:00) Belgrade, Brastislava, Ljubljana
up.tz.27,(GMT+01:00)贝尔格莱德,布拉迪斯拉发,卢布尔雅那
#From:help74,With the above example values filled in and this Port Forwarding Rule enabled, all TCP and UDP traffic on ports 6159 through 6180 and port 99 is passed through the router and redirected to the Internal Private IP Address of your Game Server at 192.168.0.50.
help74,在填入上面列子中的值且端口转发规则被开启后，端口6159到6180和端口99的所有TCP和UDP通讯都将从路由器上通过并被重新转发到您游戏服务器的私有IP地址 192.168.0.50。
#From:help155.2,When "OFF" is selected, MAC addresses are not used to control network access. When "ALLOW" is selected, only computers with MAC addresses listed in the MAC Address List are granted network access. When "DENY" is selected, any computer with a MAC address listed in the MAC Address List is refused access to the network.
help155.2,当选择"OFF"时，MAC地址没有被用来控制网络访问。当"ALLOW"被选中时，MAC地址被包含在MAC地址列表中的计算机才能访问因特网。当"DENY"被选中时，任何一台MAC地址被包含在MAC地址列表中的计算机都不能访问因特网。
#From:.sdi.s4,Established: Rate Estimating
.sdi.s4,已建立: 速率评估
#From:MISC,Miscellaneous
MISC,系列
#From:aa.alert.10,Please enter one machine.
aa.alert.10,请输入一台计算机
#From:tf.msg.Upping,Note: Now uploading. The upload may take up to 1 minute.
tf.msg.Upping,请注意:现在将开始上传。上传可能会持续1分钟。
#From:GW_LOG_EMAIL_FAILED,Failure sending log email - try again in %d minutes
GW_LOG_EMAIL_FAILED,发送日志邮件失败 - %d分钟后重试
#From:help823.17,Established or closing TCP connections.
help823.17,建立或关闭TCP连接。
#From:hhaf.dmz,Enable the DMZ option only as a last resort. If you are having trouble using an application from a computer behind the router, first try opening ports associated with the application in the <a href="../Advanced/Virtual_Server.shtml" onclick="return jump_if();">Virtual Server</a> or <a href="../Advanced/Gaming.shtml" onclick="return jump_if();">Port Forwarding</a> sections.
hhaf.dmz,开启DMZ仅作为最后一个方法。如果您在路由器后面使用某个程序的时候遇到困难，首先应在<a href="../Advanced/Virtual_Server.shtml" onclick="return jump_if();">虚拟服务器</a>或 <a href="../Advanced/Gaming.shtml" onclick="return jump_if();">端口转发</a>页面打开与程序相关联的端口。, first try opening ports associated with the application in the Virtual Server or Port Forwarding sections.
#From:sa.intro,This page displays the full details of active internet sessions to your router.
sa.intro,该页显示了您的路由器上所有活动的对话的详细信息。
#From:up.rb.2,Rebooting will disconnect any active internet sessions.
up.rb.2,重启将切断所有正在活动的因特网会话。
#From:help23,Select a schedule for when the service will be enabled. If you do not see the schedule you need in the list of schedules, go to the <a href="../Tools/Schedules.shtml"> Tools &rarr; Schedules</a> screen and create a new schedule.
help23,选择一个计划表来决定服务什么时候被打开。如果您在计划表列表中没有找到您想要的计划表，您可以在<a href="../Tools/Schedules.shtml">工具&rarr;计划表</a>页面创建一个新的计划表。
#From:.bln.title.IGMPMemberships.h,If IGMP is enabled, this area of the screen shows all multicast groups of which any LAN devices are members.
.bln.title.IGMPMemberships.h,如果IGMP被开启，屏幕的这个区域将显示包含了所有LAN设备的多播组。
#From:haf.intro.2,See also <a href="../Advanced/Virtual_Server.shtml"> Advanced &rarr; Virtual&nbsp;Server</a>, <a href="../Advanced/Gaming.shtml">Advanced &rarr; Port&nbsp;Forwarding</a>, <a href="../Advanced/Special_Applications.shtml"> Advanced &rarr; Application&nbsp;Rules</a>, and <a href="../Advanced/Network.shtml">Advanced &rarr; Network (UPnP)</a> for related options.
haf.intro.2,也可参见<a href="../Advanced/Virtual_Server.shtml">高级&rarr; 虚拟服务器</a>, <a href="../Advanced/Gaming.shtml">高级&rarr; 端口转发</a>, <a href="../Advanced/Special_Applications.shtml"> 高级&rarr; 应用规则</a>, 和<a href="../Advanced/Network.shtml">高级 &rarr; 网络(UPnP)</a>获取相关选项。
#From:help802,If you provided email information with the <a href="../Tools/EMail.shtml">Tools &rarr; Email</a> screen, clicking the <span class="button_ref">Email Now</span> button sends the router log to the configured email address.
help802,如果您通过<a href="../Tools/EMail.shtml">工具&rarr; Email设置</a>页面提供邮件信息，点击<span class="button_ref">立即发送邮件</span>按钮将路由器日志发送到已配置好的邮件地址。
#From:wprn.tt5,Click <em>Refresh</em> to try again.
wprn.tt5,点击 <em>刷新</em> 重试。
#From:hhsl.lmail,You can also have the log mailed to you periodically. Refer to <a href="../Tools/EMail.shtml" onclick="return jump_if();">Tools &rarr; EMail</a>.
hhsl.lmail,您也可以定期将邮件发送给您。请参见<a href="../Tools/EMail.shtml" onclick="return jump_if();">工具 &rarr; 电子邮件</a>。
#From:ap.intro.noreboot,Press the button below to continue configuring the router if the previous page doesn't restore in <span id="timeleft"></span>&nbsp;seconds.
ap.intro.noreboot,如果前页在<span id="timeleft"></span>秒内没有回复，请点击下面的按钮继续配置路由器。
#From:up.tz.29,(GMT+01:00) Sarajevo, Skopje, Sofija, Vilnus, Zagreb
up.tz.29,(GMT+01:00) 萨拉热窝,斯科普里,索非亚,维尔纽斯,萨格勒布
#From:GW_PURE_SETMACFILTERS2,HNAP SetMACFilters2
GW_PURE_SETMACFILTERS2,HNAP 设置MAC过滤器2
#From:GW_PURE_REBOOT,HNAP Reboot
GW_PURE_REBOOT,HNAP重启
#From:rb.change,If you changed the IP address of the router you will need to change the IP address in your browser before accessing the configuration Web site again.
rb.change,如果您更改了路由器的IP地址，在您访问网页配置界面之前您也需要更改浏览器的IP地址。
#From:help816,The IP address and, where appropriate, port number of the application on the Internet.
help816,因特网应用程序适当的IP地址和端口号。
#From:GW_PURE_DELETEPORTMAPPING_DELETE,HNAP DeletePortMapping %s:%d deleted %dth virtual server entry '%s' %v:%d<->%v:%d %S
GW_PURE_DELETEPORTMAPPING_DELETE,HNAP 删除端口映射 %s:%d 已删除 %dth 虚拟服务器条目'%s' %v:%d<->%v:%d %S
#From:ub.intro.3,If the uploaded file is correct, it is possible that the device may be too busy to properly receive it right now. In this case, please try the upload again. It is also possible that you are logged in as a 'user' instead of an 'admin' - only administrators can upload new firmware.
ub.intro.3,如果上传的文件正确，设备可能太忙不能立即接收到。在此情况下，您可以尝试再上传一次。也有可能您是作为“用户”而不是“管理员”登录的。仅管理员可上传新的固件。
#From:help30,Requests may be redirected to the "Forbidden" page if web access for the LAN machine is restricted by an Access Control Rule. Add the WAN-side identity (WAN-side IP-address of the router or its dynamic DNS name) on the <a href="../Advanced/Web_Filter.shtml"> Advanced &rarr; Web&nbsp;Filter</a> screen to work around this problem.
help30,如果LAN计算机的网页访问被访问控制规则限制，则请求可能被转发到"Forbidden"页面。可在<a href="../Advanced/Web_Filter.shtml"> 高级 &rarr; 网页过滤器</a>dd页面添加WAN端标识(路由器或动态DNS的WAN端IP地址)来解决这个问题。
#From:bln.alert.2,Invalid LAN IP Address
bln.alert.2,无效的LAN IP地址
#From:hhwf.xref,Use with <a href="../Advanced/Access_Control.shtml" onclick="return jump_if();">Advanced &rarr; Access&nbsp;Control</a>.
hhwf.xref,<a href="../Advanced/Access_Control.shtml" onclick="return jump_if();">高级 &rarr; 访问控制</a>的用户。
#From:GW_REMOTE_ADMINSTRATION,Gateway remote administration enabled on port: %u
GW_REMOTE_ADMINSTRATION,端口：%u上的网关远程管理员开启
#From:wwl.s4.intro,You have selected your security level - you will need to set a wireless security password.
wwl.s4.intro,您已经选择了您的安全级别 - 您需要设置一个无线安全密码。
#From:sd.SecTyp,Security Mode
sd.SecTyp,安全模式
